Don't have an account? Join for free
For advertising on
Interest to become a seller? Get info
Process Equipment
Pumpjack Conventional Crank Balanced Pumping Units
The Lufkin Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit in the Lufkin line. These units are simple to operate and require minimum maintenance. Unit Size* C-1824D-305-240 A 120.00 B 228.00 C 340.00 E 263.50 F 396.50 H 545.00 I 25.50 J 110.00 L 64.00 M 80.25 N - N1 24.50 R 161.00 T 58.88 U 92.38 V 52.00 W 50.00 X 112.50 AA 51.69 AB 90.88 UU 24.13 VV 57.00 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, Lufkin Oilfield Services refurbishes and sells used pumping units and provides installation, field service, machine shop repair and new OEM parts for its’ customers. All brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. Additionally, Lufkin Automation is the industry leader in oil production automation and well optimization products and services (pump-off controllers, dynamometers, fluid level equipment, well analysis, design/analysis software, well design consulting and training). With the acquisition of Delta-X and Nabla and with thousands of controllers in service, Lufkin Automation continues the Lufkin tradition of helping producers lower their production costs and optimize well efficiency.
Buy
Currently in Use
Product
New
API
Land Freight
Ball Bearing
Deep groove ball bearings are similar to traditional bearings but have raceways that closely fit the dimensions of the balls that run in them. These deep grooves result in balls that are more stable and can handle higher loads than shallow-groove bearings.
Buy
Made to Order
Product
New
ISO
Sea Freight
O-rings
An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface.
Buy
In Stock
Product
New
API
Sea Freight
Scaffold
Finish the job in any and all conditions since this product is weather-resistant and durable so you can enjoy it for many years to come. Each frame is sold separately. Note that the galvanized cross braces and aluminum platforms with plywood are not included. When assembled, this scaffold has a load capacity of up to 4,960 pounds.
Buy
In Stock
Product
New
ISO
Sea Freight
Manual Gate Valve
Gate valves are an energy-efficient valve option, as the movement direction or ram is perpendicular to the media flow direction. As a result, less power is consumed when opening or closing the gate valves in comparison to globe valves. Due to their energy-efficiency, they help reduce total ownership cost.
Buy
In Stock
Product
New
API
Sea Freight
Photovoltaic electrical power generator
A solar panel, or solar module, is one component of a photovoltaic system. They are constructed out of a series of photovoltaic cells arranged into a panel. They come in a variety of rectangular shapes and are installed in combination to generate electricity. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect.
Buy
In Stock
Product
New
ISO
Sea Freight
Conventional Pumpjack
The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported.
Buy
Currently in Use
Product
Used
API
Land Freight
Firewater Pump
Fire pumps are an essential part of many water-based fire protection systems. They are used to increase the pressure (measured in psi and bar) of a water source when that source is not adequate for the system it's supplying. As part of a fire sprinkler system, a fire pump receives water from either an underground water supply or a water tank, lake, or reservoir, and is powered by electricity or diesel fuel. The high-pressure supplied by the pump distributes water through the sprinkler system and hose standpipes. Fire pumps are typically made with non-corrosive internal parts to avoid clogging due to corrosion.
Buy
Made to Order
Product
New
ASME
Sea Freight
Flange for process equipment
Flange connections are one of the best options for pipe end connections that have bends that are subjected to very high lateral forces inclined to cause the loosening of the assembly. Flanges are used instead of welded connections to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently). Upgrading threaded connections to flanged connections increases reliability and integrity while maintaining operational flexibility.
Buy
Made to Order
Product
New
API
Sea Freight
Hydraulic Cylinder
A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end).
Buy
In Stock
Manufacturer
New
ANSI
Sea Freight
Hydraulic Hose
Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar.
Buy
In Stock
Product
New
ANSI
Sea Freight
Nuts and Bolts
A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance
Buy
In Stock
Product
New
ASME
Sea Freight
Battery AGM 12V 200Ah
Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles. AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The selfdischarge doubles for every increase in temperature by 10°C. Low internal resistance Accepts very high charge and discharge rates. High cyclic life capability More than 500 cycles at 50% depth of discharge. *data sourced from manufacturer.
Buy
Made to Order
Product
New
ASME
Sea Freight
EasySolar 12V and 24V, 1600VA
All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue
Buy
Made to Order
Product
New
ASME
Land Freight
MultiPlus Inverter/Chargers
Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue
Buy
Made to Order
Product
New
ASME
Land Freight
Rutland 1200 Terrain Windcharger
Rutland 1200 Turbine Features Unique Tri-Namic Aerofoil Blades The refined aerofoil blade profile is purpose designed for quietness, low windspeed start up and high wind peak aerodynamic performance. Each injection moulded blade is identical and perfectly balanced for smooth operation. Unrivalled power generation of 250W at 10m/s (23mph/37kmph) and peak power of 483W @ 15m/s. Our efficient, finely profiled Tri-namic blades ensure that the Rutland 1200 converts the maximum energy available in the wind to charge your batteries. Elegant and Aerodynamically Styled The sculpted nose and nacelle efficiently direct the flow of air leading to the built-in tail fin which directs the rotor to the prevailing wind. Our Build Quality The Rutland 1200 Turbine sets the standard for micro wind turbines in both performance and reliability. At our manufacturing facility in Corby, UK we use high grade materials to create a robust, high quality and long lasting turbine. Distinctive blue hard anodized marine grade aluminium, modern and lightweight UV stable injection mouldings and stainless steel components and fasteners perform in temperatures experienced from the Arctic to the equator. Available in 12V 24V & 48V versions. Generator The Rutland 1200T generator is based on Marlec’s pioneering disk type design. Its low resistance AC operation combines the latest powerful rare earth type magnets with a 3-phase winding and low friction bearings. This is housed in a protective aluminium casing and all manufactured by Marlec in the UK. *features from manufacturers literature
Buy
Made to Order
New
ANSI
Sea Freight
Hydro Generator
A SIMPLE WATER-TO-WIRE SOLUTION This micro hydro solution is based on both proprietary designs in the turbine and drivetrain, and off-the-shelf components, to deliver a complete water-to-wire system. This solution is a self-contained module made of single or twin turbines, generators, electrical cabinet, and is connectable to BOP/Grid. They are assembled and mounted in a self-stabilized concrete structure requiring no civil works. The system power output is 480 V, 3-phase AC, 50 Hz & 60 Hz. This new, highly cost-effective, renewable energy solution, capable of capturing most of the untapped energy on your site, has many assets. Its performance levels have been tested both in laboratory and on site. Actual power rating and instantaneous output depend mainly on water velocity (>1 m/s). In our catalogue of product, we can select the best options to suit a particular site. This technology is scalable by equipping an existing canal with dozens or hundreds of 5 to 15 kw modules. Land usage Turbines are installed on existing, untapped water infrastructures. No land planning is needed, with no modification required on existing assets. Predictable and available Permanent, predictable and controllable production with 95% availability. *information from manufacturer
Buy
Made to Order
Product
New
ASTM
Land Freight
Chemical Pump
Our chemical injection units can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these chemical injection units are highly reliable and easy to operate. Clients use our chemical injection units for corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, nitrate injection, and more. These skids are rated for offshore and desert conditions and can be customized for specific operating areas.
Buy
In Stock
Manufacturer
New
ISO
Air Freight
Pumping Unit
Our pump skids can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these units are highly reliable and easy to operate. Clients use our pump skids multiple uses including; corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, Nitrate injection, and more. These skids are rated for offshore and onshore use and can be custom ordered for your specific needs.
Buy
In Stock
New
New
ISO
Air Freight
Nitrogen Unit
Introducing Sivam's Nitrogen Generator: The Ultimate Solution for Nitrogen Generation on the Go! This state-of-the-art unit utilizes PSA Column technology to generate gas phase nitrogen of specified quality levels at any field location. It's the perfect solution for industries that require a reliable source of nitrogen in remote locations, without the hassle of transporting and storing nitrogen cylinders. Sivam's Nitrogen Generator is designed with portability and convenience in mind. With its compact size and easy-to-use interface, it can be set up quickly and easily on any job site. Whether you're in the oil and gas industry, electronics manufacturing, food packaging, or any other industry that requires high-purity nitrogen, Sivam's Nitrogen Generator is the ideal choice. One of the key benefits of Sivam's Nitrogen Generator is its advanced PSA Column technology. This technology enables the unit to separate nitrogen from the air using a carbon molecular sieve, providing a reliable source of nitrogen gas at a specified purity level. This means you can be confident in the quality of the nitrogen you're generating, no matter where you are. In addition, Sivam's Nitrogen Generator is designed for efficiency and cost-effectiveness. With its low power consumption and minimal maintenance requirements, it's a cost-effective alternative to traditional nitrogen sources. And because it's a self-contained unit, there's no need to worry about transporting and storing nitrogen cylinders, saving you time and money. Overall, Sivam's Nitrogen Generator is the ultimate solution for nitrogen generation on the go. With its advanced technology, ease of use, and cost-effectiveness, it's the perfect choice for industries that require a reliable source of nitrogen gas, no matter where they are. Contact us today to learn more about Sivam's Nitrogen Generator and how it can benefit your business.
Rental
In Stock
Manufacturer
New
ISO
Land Freight
Electric Heater
Introducing Sivam's Electric Heater Units: The Solution for Improved Oil Flow! Our cutting-edge technology is designed to increase the temperature of oil, resulting in reduced viscosity and improved oil flow. It's the perfect solution for industries that require consistent and efficient heating for their oil-based applications. Sivam's Electric Heater Units are built with durability and reliability in mind. Our state-of-the-art technology ensures that your oil is heated to the perfect temperature quickly and efficiently, with minimal energy consumption. This means you can enjoy the benefits of improved oil flow while also saving on energy costs. Our Electric Heater Units are specifically designed to improve the flow of your oil, regardless of its viscosity. With our units, you can maintain consistent oil temperatures throughout your system, ensuring optimal performance and efficiency. This is especially important for industries such as oil and gas, where maintaining consistent oil temperatures is critical to operations. At Sivam, we pride ourselves on providing exceptional customer service and support. Our team of experts is always available to assist you with any questions or concerns you may have, ensuring that you get the most out of your Electric Heater Unit. In addition to their efficiency and reliability, Sivam's Electric Heater Units are also built with safety in mind. Our units are equipped with advanced safety features to ensure that your employees and equipment are protected at all times. Overall, Sivam's Electric Heater Units are the perfect solution for industries that require improved oil flow and consistent oil temperatures. With their cutting-edge technology, reliability, and safety features, you can trust that Sivam's Electric Heater Units will exceed your expectations. Contact us today to learn more about how our Electric Heater Units can benefit your business.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Green Chemicals
At Cleanstream, we understand the importance of using safe, green and environmentally friendly chemicals for cleaning, de-rusting, and protecting any kind of reusable and/or precious objects and property. That's why we supply a range of pH-neutral, safe and innovative cleaning solutions that comply with environmental regulations and minimize the impact on the environment. Our products are designed to provide you with a reliable and efficient solution to your cleaning needs, while ensuring the safety of your staff and the environment. We offer a variety of solutions for cleaning, descaling and protecting metal tools, pipes, installations, boilers, heat exchangers, pump systems and more. Our solutions are effective, yet safe for hands, skin and the environment. In addition, we also provide strong solvents for cleaning sulphate deposits in geothermal, oil and gas wells, mid and downstream installations and systems. Our innovative acid substitutes are perfect for the stimulation of geothermal, oil and gas wells. What sets us apart is our commitment to providing green solutions that are also effective. Our products are certified to be environmentally friendly, effective and comply with all relevant regulations. Our certifications include CEFAS, HOCNF Certificate (Harmonized Offshore Chemical Notification Format), and REACH documentation (Registration, Evaluation and Authorization of Chemicals: European legislation for registration, evaluation and authorization of chemicals). At Cleanstream, we are proud to be your green partner in the industry. We continuously research and develop new and innovative products to provide the best and most efficient solutions for our clients while also ensuring the protection of the environment. Trust Cleanstream to provide you with safe, effective and environmentally friendly cleaning solutions. Contact us today to find out more about our products and services.
Buy
In Stock
Product
New
ISO
Land Freight
Lab
Cleanstream's State-of-the-Art Laboratory Facility Offers Fast, Accurate and Environmentally-Friendly Solutions for NORM and LSA Contaminants Cleanstream is proud to announce the opening of its own laboratory facility, which offers quick and accurate identification of (NORM) sediments and deposits in and on materials and equipment. Our experts quantify and provide an environmentally-friendly solution from our product portfolio to ensure that your property is cleaned with the utmost safety and efficiency. Our laboratory services and analyses cater to all types of materials, both NORM contaminated and non-NORM contaminated. Basic Identification Our laboratory performs an analysis of metallurgy and scale deposits, including NORM / LSA samples, to identify the most effective treatment method for steel metallurgy, sediment/deposit identification, and soil characteristics. Solubility and Compatibility Analysis We perform solubility tests with our environmentally-friendly products and report on their performance. Our various eco-friendly products are readily available from our stock. Features of Cleanstream Laboratory Our laboratory is authorized to analyze NORM / LSA samples and provides screening of chemical dissolvers. We are proud of our fast turnaround time and can supply laboratory analyzes as a standard with product purchase. With Cleanstream's state-of-the-art laboratory facility, you can rest assured that your property will be treated with the most advanced and eco-friendly solutions available. Our goal is to ensure your safety while minimizing environmental impact. Trust Cleanstream for all your NORM and LSA decontamination needs!
Service
Currently in Use
Service
New
ISO
Land Freight
Versol B
Introducing BMS VerSol B: The Perfect Replacement for Harmful Chemicals Cleanstream is proud to present BMS VerSol B, an environmentally friendly alternative to standard solvents like D-Limonene, Dearomatized hydrocarbons, and Perchloroethylene. We understand the negative impact that harmful chemicals have on our planet and that's why we have developed a product that is not only effective but also safer for the environment. With BMS VerSol B, you can say goodbye to traditional solvents and hello to a more sustainable future. BMS VerSol B is a chemical product that provides a more environmentally conscious alternative to D-Limonene. It's a perfect replacement for all your solvent needs, providing exceptional cleaning performance without the environmental hazards of traditional solvents. Whether you're a small business owner or a large industrial company, BMS VerSol B is the right choice for you. By choosing our product, you're taking a step towards reducing your costs and making a positive impact on the environment. At Cleanstream, we are committed to creating a sustainable future, and we believe that BMS VerSol B is just one of the many ways we can contribute to a cleaner, greener planet. So what are you waiting for? Make the switch to BMS VerSol B today and experience the benefits of a safer, more eco-friendly solvent. Contact us to learn more about how you can get started with BMS VerSol B.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Versol D
Introducing BMS VerSol D: The Safer and More Environmentally Conscious Solvent Cleanstream is excited to introduce BMS VerSol D, the perfect replacement for harmful solvents such as THF, NMP/NEP, and chlorinated solvents. Our product is designed to provide a more sustainable and safer alternative for your cleaning needs. BMS VerSol D is a chemical product that is perfect for those looking for a more environmentally conscious solution to their cleaning needs. Our solvent is a green Xylene replacement that is much safer to use than traditional solvents that contain BTEX. In addition to being safer for the environment, BMS VerSol D is also highly effective in cleaning corrosion, inhibition, and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our product is also a great replacement for BTEX solvents in well cleanup operations. With BMS VerSol D, you can achieve the same cleaning performance without any of the harmful effects of traditional solvents. By choosing BMS VerSol D, you are taking a significant step towards reducing your carbon footprint and contributing to a cleaner and greener planet. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. At Cleanstream, we are committed to creating a sustainable future, and BMS VerSol D is just one of the many ways we are working towards that goal. So why wait? Make the switch to BMS VerSol D today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol D.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Versol M
Introducing BMS VerSol M: The Safe and Effective Solvent for Your Cleaning Needs Cleanstream is thrilled to introduce BMS VerSol M, a safer and more environmentally conscious alternative to harmful solvents such as methylene chloride, acetone, and MEK. Our product is a chemical solvent that provides exceptional cleaning performance while being much safer for the environment than traditional solvents that contain BTEX. BMS VerSol M is a green methylene chloride replacement that is perfect for those who are looking for a more sustainable and safer solution to their cleaning needs. BMS VerSol M is designed to clean corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is highly effective and provides a safer alternative to harmful chemicals like methylene chloride, acetone, and MEK. In addition, BMS VerSol M is a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol M is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol M today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol M and start cleaning with confidence.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Versol T
Introducing BMS VerSol T: The Safe and Versatile Solution for Your Cleaning Needs Cleanstream presents BMS VerSol T, the perfect replacement for harmful solvents such as NMP/NEP, glycols, and aromatics. Our solvent is designed to provide a more sustainable and safer alternative to traditional solvents that contain BTEX. BMS VerSol T is a chemical product that is fully miscible in water and/or acid and has no CLP labeling. This makes it a safe and versatile solution for your cleaning needs. Our product is a green Xylene replacement that is much safer to use and provides exceptional cleaning performance without any of the negative environmental effects of traditional solvents. In addition to being safe for the environment, BMS VerSol T is highly effective in cleaning corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is specially formulated to provide the same level of cleaning performance as traditional solvents without any of the harmful effects. BMS VerSol T is also a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative environmental effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol T is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol T today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol T and start cleaning with confidence.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Barium Scale Dissolver
Introducing Enviro-Syn® BSD-40™: The Solution to Your NORM Scale Dissolving and Descaling Needs Cleanstream is excited to present our high-performance NORM scale dissolver and descaler, Enviro-Syn® BSD-40™. Our product is specially designed to efficiently remove sulfate scale, with a unique ability to dissolve extremely high amounts of barium sulfate scales. We understand the challenges that come with BaSO4 scale formation, such as reduced production, bacterial growth, fouling of piping, tanks, and process equipment. These issues can greatly reduce the profitability of your operations. That's why we have created Enviro-Syn® BSD-40™, a product that can effectively remove these scales and help improve your operations' profitability. Our product is highly versatile and can be used in a variety of applications, including down-hole scaling issues, production well near wellbore damage from barite-based mud systems, heat exchangers/pipelines, on-shore/off-shore topside processing and production treatments, industrial boiler systems, geothermal well scale treatments, separators/hydrocyclones/degasser treatments, and injection well treatments. One of the significant advantages of Enviro-Syn® BSD-40™ is that it is not corrosive to metal or typical oilfield elastomers and seals. This means that you can use our product without the risk of damaging your equipment. At Cleanstream, we are committed to providing high-quality products that are safe for the environment and the people who use them. Our product is designed to meet the highest industry standards while providing exceptional performance. So why wait? Make the switch to Enviro-Syn® BSD-40™ today and experience the benefits of a highly effective NORM scale dissolver and descaler that is safe for your equipment and the environment. Contact us to learn more about how you can get started with Enviro-Syn® BSD-40™ and start improving your operations' profitability.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
HCR-2000
Introducing Enviro-Syn HCR, the environmentally responsible HCl acid replacement product line that is changing the game. Say goodbye to hazardous exposure and corrosive properties without sacrificing performance. With Enviro-Syn HCR, you can use it in any situation where HCL is normally used, but without the risks and precautions, both personally and for your equipment. BMS Development - Fluid Enviro-Syn HCR2000N Modified Acid (North Sea approved/WGK-1) is the latest addition to this product line. This yellow-classified, safer alternative to 15% Hydrochloric acid is North Sea approved and can be used in a range of applications at temperatures up to 900 C. From spearhead acid to scale treatment, HCR-2000N is compatible with formation oils and fluids and requires less additives than typical 15% HCl blends. HCR-2000N is also very versatile and is supplied as a concentrate, which is typically diluted to a 20% to 90% concentration at the well site (platform) with seawater, produced or fresh water. Its comprehensive spending nature ensures that it is non-corrosive to skin tissue (OECD 404) and has low fuming and metal corrosion properties. Enviro-Syn HCR is the perfect solution for those who want to make the switch to more sustainable and environmentally-friendly practices. And with HCR-2000N, you can have peace of mind knowing that you're using a North Sea approved product that has a readily biodegradable nature in seawater (OECD 306) and can solubilize 225 kg/m3 of CaCO3. Make the switch today and experience the benefits of Enviro-Syn HCR.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
HCR-3000
Introducing HCR-3000: The Safe and Effective Synthetic Acid™ Replacement At Cleanstream, we're committed to delivering high-performance oilfield solutions that are both environmentally responsible and safe for workers. That's why we're proud to introduce HCR-3000, our latest Synthetic Acid™ replacement product that delivers the same results as mineral acids but without the halogen content. HCR-3000 is a strong, non-fuming, and non-oxidizing acid alternative that can be used in a variety of oilfield applications, including scale removal, well stimulation, and acidizing. Unlike traditional mineral acids, HCR-3000 is non-corrosive to skin and safe on chrome and chrome plating, making it a safer and more reliable choice for your operations. With its comprehensive spending nature, HCR-3000 is an excellent choice for operators looking to cut down on chemical costs. Plus, its non-fuming, non-regulated formula makes it easy and safe to transport and handle, reducing the risk of accidents and exposure to hazardous chemicals. But don't let its eco-friendly and worker-safe properties fool you. HCR-3000 is a powerful acid replacement that delivers high-temperature stability of over 1800C, making it an excellent choice for high-temperature applications. And with the ability to be enhanced through the addition of conventional oilfield chemistry, HCR-3000 can be customized to meet your specific needs and requirements. Say goodbye to traditional mineral acids and hello to HCR-3000, the safer, more effective Synthetic Acid™ replacement from Cleanstream.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
HCR-6000
Introducing HCR-6000, the latest addition to Cleanstream's ‘Environmentally Responsible’ modified acid product line. HCR-6000 is a powerful, low fuming Modified acid that has solubilizing abilities of 15%-25% HCI (concentrate). It's the perfect solution for minimizing the hazardous exposure levels and fuming properties of Hydrochloric acid. HCR-6000 is specifically designed to cater to the needs of the oil and gas industry, where the use of mineral acids is common practice. But unlike traditional hydrochloric acid, HCR-6000 is a clear, low-fuming acid with a low vapor pressure. This means that it poses less of a risk to human health and the environment. One of the standout features of HCR-6000 is its comprehensive spending nature. It is more than two times slower to spend than conventional HCl acid, making it an economical choice for your operations. And if that's not enough, HCR-6000 is also classed as a Class 1 acid package, making it easy to transport and handle. HCR-6000 is also highly customizable. It can be enhanced with conventional oilfield chemistry to cater to the specific needs of your operations. It offers high thermal stability, no precipitation from spent fluids, and iron stabilization effect (nano particles), making it a versatile solution for various applications such as spearhead acid, fracturing/matrix, production, injection wells, and scale treatment. HCR-6000 is also oil compatible, making it an excellent choice for your oil and gas production. Its high spent pH of over 4.5 makes it easy to dispose of, reducing plant interruptions and making it an environmentally responsible choice. At Cleanstream, we are committed to providing our customers with the best possible solutions that are both environmentally responsible and efficient. With HCR-6000, we are taking another step towards a cleaner and safer future for the oil and gas industry. Contact us today to learn more about HCR-6000 and our other ‘Environmentally Responsible’ products.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Enviro-Syn HCR-7000
Introducing HCR-7000: The Powerful, Low Fuming Modified Acid™ Solution for Your Operations As an oil and gas operator, you know the challenges of using hydrochloric acid (HCl) to dissolve downhole scale and other challenges. But what if there was a solution that could maintain the solubilizing ability and reactivity rates of HCl, while minimizing the hazardous exposure levels, corrosion rates, and negative HS&E properties? That's where HCR-7000 comes in. HCR-7000 is part of the “Environmentally Responsible” Modified Acid™ product line, designed to be a powerful, low fuming acid alternative that offers similar solubilizing abilities of 15% HCl (concentrate). The solution is also compatible with conventional oilfield chemistry, allowing for customization to meet the specific needs of your operations. One of the major benefits of HCR-7000 is its non-hazardous nature. The concentrate has undergone third-party testing and has been shown to be non-corrosive to skin tissue. This translates to ultra-low long-term corrosion effects, making it a reliable solution for your operations. The clear, ultra-low-fuming and vapor pressure properties of HCR-7000 make it a safe option for use in oil and gas operations. Its aggressive reaction rates compared to typical modified or synthetic acid systems make it an ideal solution for spearheads, stimulations, and workovers. Plus, it is compatible with typical elastomers used in oil and gas operations. HCR-7000 also offers the ability to adjust concentrations on the fly to target optimal pay zones, making it a versatile and flexible solution for your operations. With high thermal stability of up to 1900 C, there is no need to worry about precipitation from spent fluids. Choose HCR-7000, the powerful, low fuming Modified Acid™ solution for your operations. Experience the benefits of this safe, reliable, and effective solution that can help you achieve your production goals while minimizing the negative impacts on your operations and the environment. Contact us today to learn more.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
SEM SDR
Introducing SEM SDR Rust Remover, the revolutionary rust removal technology that is changing the game in the steel industry. Developed from proven nuclear industry and engineering pre-commission operations, this water-based, safe and non-toxic product is flexible and effective on all grades of steel. SEM SDR Rust Remover is unlike any other rust removal product on the market. With a neutral pH and non-corrosive properties, it is safe for use on all steels, metals and engineering polymers. When used as directed, SEM SDR effectively removes all rust to leave behind a super clean, virgin metal surface. What sets SEM SDR apart is its ability to impart a degree of corrosion resistance to the treated surface. This helps to prevent flash rusting after cleaning, providing long-lasting protection for your valuable assets. To ensure the best results, it is recommended to degrease the metal surface before treatment with SEM SDR. This can easily be achieved with a surfactant or wash. Don't settle for less when it comes to rust removal. Choose SEM SDR Rust Remover and experience the power of advanced technology and superior results.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Xanthum Gum
Introducing Xantham Gum from Cleanstream – the versatile solution for your drilling and completion needs. As a leader in providing innovative and environmentally responsible solutions for the oil and gas industry, Cleanstream is proud to offer this unique polymer for rheology modification, hole cleaning, and solids suspension. What sets Xantham Gum apart is its ability to provide excellent friction reduction – a feature that is unmatched by most other polymers in oilfield drilling and completion applications. Additionally, it can be used in most types of water-based fluids, making it an incredibly versatile product for your operations. Our in-house laboratory facilities allow us to determine the right approach to solve your specific problem. And at Cleanstream, we are committed to developing eco-friendly solutions for as many applications as possible. Whether you need Xantham Gum for a specific project or require our personnel and equipment for complete execution, we have you covered. Click on the datasheet for more information or contact us to learn how Xantham Gum can benefit your operations. Trust Cleanstream for innovative and sustainable solutions for your oil and gas needs.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
LNG Storage Tanks and Regassifiers
Lovat Gas Solutions: Your Dependable Partner for LNG Supply When it comes to LNG supply, Lovat Gas Solutions has a proven track record of delivering, no matter the conditions or location. We understand that your business relies on the uninterrupted availability of natural gas, whether you are an industrial user or a utility. That's why we are here to provide you with peace of mind, allowing you to focus on your core business while we take care of your gas supply needs. Our commitment to excellence means that we go above and beyond to ensure the dependability of our LNG supply. We have a deep understanding of the unique challenges and requirements of different industries, and our experienced team is well-equipped to develop a solution that caters to your organization's specific needs. At Lovat Gas Solutions, we offer flexible options for LNG supply to accommodate your business requirements. Whether you need a short-term supply to cover temporary spikes in demand, a long-term solution to support your ongoing operations, or a reliable backup supply to safeguard against unforeseen disruptions, we have you covered. By partnering with us, you can expect: 1. Reliability: We have a proven track record of delivering LNG supply, regardless of the conditions or location. Our robust infrastructure and logistical expertise ensure that your business receives a consistent and dependable supply of natural gas. 2. Expertise: With years of experience in the industry, our team possesses extensive knowledge and understanding of LNG supply. We stay up-to-date with the latest advancements and industry trends to provide you with the best possible solutions. 3. Customized Solutions: We recognize that each organization has unique needs. Our team will work closely with you to understand your specific requirements and develop a tailored LNG supply solution that aligns with your business goals. 4. Peace of Mind: When you partner with Lovat Gas Solutions, you can have peace of mind knowing that your gas supply needs are in capable hands. Our reliable and responsive service ensures that you can focus on your business without worrying about interruptions in your natural gas supply. Don't let the uncertainties of LNG supply hinder your business operations. Contact Lovat Gas Solutions today, and let us develop a dependable short-term, long-term, or backup supply of natural gas that suits your organization's needs. Trust us to deliver, no matter the conditions or location, so you can keep your business running smoothly and efficiently. Get in touch with us now to explore how we can support your gas supply requirements and help your business thrive.
Service
In Stock
Product & Service
New
API
Land Freight
Compressed Natural Gas - CNG
Lovat Gas Solutions: Your Trusted Partner for CNG Virtual Pipelines At Lovat Gas Solutions, we are driven by our commitment to finding the right solutions for our customers, no matter the size or complexity of the problem. We take great pride in our ability to work closely with you to understand your unique needs and deliver the most suitable CNG (compressed natural gas) solutions available in the industry. When it comes to your CNG requirements, our experienced team is fully prepared to meet your needs. Whether you are facing a planned outage or an emergency situation, we are here to provide a quick and efficient solution. With a single phone call, you can rely on our responsive and reliable professionals to swiftly address your CNG challenges. Why choose Lovat Gas Solutions for your CNG needs? 1. Customer-Centric Approach: We prioritize working hand in hand with our customers to identify the most appropriate solution for their specific requirements. Your satisfaction is our top priority, and we go above and beyond to ensure that our services align with your expectations. 2. Comprehensive CNG Expertise: Our team is equipped with extensive knowledge and expertise in the field of CNG. We stay up-to-date with the latest industry trends and advancements, allowing us to provide you with innovative and effective solutions. 3. Responsive and Reliable Service: Time is of the essence when it comes to CNG outages or emergencies. You can count on us to promptly address your needs and provide a quick solution. Our reliable professionals are committed to minimizing downtime and ensuring the smooth operation of your business. 4. Tailored Solutions: We understand that every CNG situation is unique, and we believe in offering customized solutions. By carefully assessing your requirements, we can develop a solution that is perfectly tailored to your specific needs, ensuring optimal results. Partner with Lovat Gas Solutions today and experience the difference of working with a company that puts your needs first. Whether you are facing a planned outage or an unexpected emergency, our team is ready to provide you with responsive, reliable, and effective CNG solutions. Contact us now and let us help you overcome your CNG challenges, no matter the size or complexity. Together, we will find the perfect solution for your CNG needs.
Service
In Stock
Product & Service
New
ANSI
Land Freight
Hydrogen
Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.
Buy
In Stock
Product & Service
New
ANSI
Land Freight
Biogas Transport
Efficient RNG Transport Solutions: Trust Lovat Gas Solutions If you have Renewable Natural Gas (RNG) that needs to be transported from Point A to Point B, Lovat Gas Solutions is here to provide you with comprehensive and efficient logistical solutions. With our expertise in RNG transport, we can devise a tailor-designed plan that perfectly suits your project's requirements, covering every aspect from compression to trucking and decompression facilities. Renewable Natural Gas (RNG) has emerged as a vital component in the transition towards sustainable energy. It offers the dual benefits of reducing greenhouse gas emissions and providing a clean, renewable source of energy. At Lovat Gas Solutions, we understand the importance of RNG and its role in creating a greener future. That's why we are dedicated to providing top-notch RNG transport services to ensure the smooth and efficient movement of RNG from its source to sales. When you partner with Lovat Gas Solutions, you can expect: 1. Tailor-Designed Logistical Plan: We recognize that each RNG transport project is unique, with its own specific requirements. Our experienced team will work closely with you to understand the details of your project and devise a logistical plan that is perfectly tailored to your needs. From compression to trucking and decompression facilities, we cover every step of the process. 2. Comprehensive Service: Our commitment to excellence extends to every aspect of RNG transport. We offer a full range of services, including compression facilities to prepare the RNG for transport, efficient trucking solutions to transport the RNG safely and reliably, and decompression facilities at the destination to ensure the gas is ready for distribution or utilization. 3. Expertise and Experience: With years of experience in the industry, our team has the knowledge and expertise required to handle RNG transport projects of all sizes. We stay up-to-date with the latest advancements in RNG technology and transportation, ensuring that we provide you with the most efficient and effective solutions available. 4. Commitment to Sustainability: At Lovat Gas Solutions, sustainability is at the core of everything we do. We understand the importance of reducing carbon emissions and creating a greener future. By providing RNG transport solutions, we contribute to the utilization of renewable energy sources and help our clients achieve their sustainability goals. When it comes to RNG transport, trust Lovat Gas Solutions to deliver exceptional service, reliability, and efficiency. Contact us today to discuss your project and let us devise a tailor-designed logistical plan that meets your specific requirements. Together, let's move towards a more sustainable future with efficient RNG transport solutions from Lovat Gas Solutions.
Service
In Stock
Product & Service
New
ANSI
Land Freight
Gas Recovery Equipment
Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations.
Service
Made to Order
Product & Service
New
ASME
Land Freight
Gas Processing and Transport
Maximize the Value of Your Stranded Gas with Lovat Gas Solutions Stranded gas, trapped in wells that are isolated from pipeline infrastructure, represents an untapped opportunity for producers. At Lovat Gas Solutions, we specialize in helping companies unlock the value of their stranded gas assets. If you have idle gas wells and are seeking to realize the potential value of this resource, we are here to assist you in developing a production and revenue plan. Stranded gas wells can present unique challenges, but they also hold significant potential. To extract value from these assets, a well-designed plan is essential. Our team of experts at Lovat Gas Solutions has the knowledge and experience to help you navigate this process and develop a comprehensive production and revenue plan for your stranded gas. Why choose Lovat Gas Solutions for your stranded gas needs? 1. Specialized Expertise: We understand the complexities and nuances of stranded gas projects. With our specialized expertise, we can assess the unique characteristics of your stranded wells and design a customized plan to extract and monetize the gas effectively. 2. Value Optimization: Our goal is to help you maximize the value of your stranded gas assets. By developing a production and revenue plan tailored to your specific situation, we aim to unlock the full potential of your resources and generate a significant return on investment. 3. Comprehensive Support: From the initial evaluation to the execution of the plan, Lovat Gas Solutions provides end-to-end support. Our team will collaborate closely with you, offering guidance and assistance at every stage of the process to ensure a seamless and successful outcome. 4. Sustainable Approach: We prioritize environmental sustainability in all our operations. Our plans for stranded gas production are designed to comply with regulatory standards and minimize any potential impact on the environment. We are committed to helping you extract value from your stranded gas assets while maintaining responsible and sustainable practices. Take the first step towards unlocking the value of your stranded gas assets. Contact Lovat Gas Solutions today, and let our team of experts develop a production and revenue plan that suits your specific needs. With our specialized expertise, comprehensive support, and commitment to sustainability, we are the partner you can rely on to maximize the potential of your stranded gas resources. Trust Lovat Gas Solutions to transform your idle gas assets into valuable sources of revenue.
Service
Made to Order
Product & Service
New
ANSI
Land Freight
Operator
Reliable Utility Backup Operators: Trust Lovat Gas Solutions When it comes to utility backup operations, Lovat Gas Solutions stands out as your trusted partner. With over 80 years of combined experience in the industry, our team possesses extensive knowledge and expertise in assisting gas utilities with pipeline outages and redesigning town border stations. We are here to provide you with highly skilled utility backup operators backed by engineers and operations support to meet your short or long-term operational needs. At Lovat Gas Solutions, we understand the criticality of having a reliable and efficient backup operation in place. Our team of utility backup operators is well-trained and equipped with the necessary expertise to seamlessly support your utility or gas operation during emergencies or planned downtime. We ensure that our operators are up to date with all safety training, enabling them to come and provide immediate assistance to your operations when required. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With our extensive experience across Canada, from north to south and east to west, we have a deep understanding of the unique challenges and requirements of utility backup operations. Our team draws upon their years of experience to deliver reliable and effective solutions tailored to your specific needs. 2. Comprehensive Support: Our utility backup operators are backed by a team of engineers and operations support, ensuring a well-rounded approach to addressing your operational manpower needs. We provide a holistic support system that covers all aspects of utility backup operations, from planning to execution. 3. Safety as a Priority: Safety is of utmost importance to us. We prioritize the well-being of our operators and your operational environment. Our utility backup operators undergo rigorous safety training to ensure compliance with industry standards and best practices. 4. Responsive Service: We understand that utility backup operations require quick response and reliable support. Our team is ready to assist you on short notice, ensuring minimal disruption to your operations during emergencies or planned outages. When you choose Lovat Gas Solutions for your utility backup operator needs, you can rest assured that you are partnering with a reliable and experienced company. We are dedicated to providing the highest level of service and support to meet your temporary operational manpower requirements. Contact a Lovat Gas Solutions expert today and let us help you with your utility backup operator needs. With our reliable team, comprehensive support, and commitment to safety, we will ensure a seamless and efficient utility backup operation for your gas utility or operation. Trust Lovat Gas Solutions to be your trusted partner in utility backup operations.
Service
In Stock
Service
Used
API
Land Freight
Operations Support
Trusted Field Operators: The Heart of Lovat Gas Solutions At Lovat Gas Solutions, our success is built upon the expertise and dedication of our field operators. With over 80 years of combined experience, our team draws upon their vast knowledge to deliver exceptional service. From assisting gas utilities during pipeline outages to executing complex flare gas capture projects, our field operators are at the forefront of making it all happen. What sets our field operators apart? 1. Extensive Experience: Our team of field operators possesses a wealth of experience gained through their involvement in various gas-related projects. Whether it's managing pipeline outages or executing flare gas capture initiatives, they have the expertise to handle diverse challenges with precision and efficiency. 2. Compressed and Cryogenic Gases Expertise: We specialize in compressed gases and liquefied cryogenic gases. Our field operators have undergone rigorous in-house training, equipping them with the necessary skills to handle these gases safely and efficiently. You can trust them to deliver gas wherever it's needed, ensuring a seamless supply for your operations. 3. Safety-Focused Approach: Safety is paramount in everything we do. Our field operators receive comprehensive safety training to ensure compliance with industry standards and best practices. They are well-prepared to support your operations on short notice, providing a reliable and safe service that you can depend on. 4. Nationwide Reach: With experience spanning from the north to the south and east to west of Canada, Lovat Gas Solutions has established a strong presence across the country. Our field operators are well-versed in the unique requirements of different regions, allowing us to provide comprehensive support to clients nationwide. When you choose Lovat Gas Solutions, you gain access to a team of field operators who are dedicated to delivering excellence. With their expertise, commitment to safety, and nationwide reach, they are ready to support your mobile gas needs. Contact a Lovat Gas Solutions expert today to discuss how our skilled field operators can assist you. Whether you require gas supply, project execution, or emergency support, trust our team to deliver reliable solutions that drive the success of your operations. Experience the difference of working with field operators who are the heart of Lovat Gas Solutions.
Service
In Stock
Service
Used
API
Land Freight
Unique Gas-Related Application
Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions.
Service
Made to Order
Service
New
ISO
Land Freight
Energy Transition
Unlocking Profitable Alternative Energy Solutions: Mobile, Reliable, and Environmentally Responsible Lovat Gas Solutions is your trusted partner in developing profitable alternative energy solutions. We understand the importance of coordinating a dedicated team of experts and resources to deliver innovative, mobile, reliable, and environmentally responsible solutions that assist our clients and partners in their transition to new energy paradigms. With a key focus on safety, we are committed to helping you achieve your energy goals while maximizing profitability. Why choose Lovat Gas Solutions for your alternative energy needs? 1. Coordinated Expertise: Our team of skilled professionals brings together expertise from various disciplines to provide a comprehensive approach to alternative energy solutions. We coordinate the efforts of our talented individuals and resources to ensure seamless execution and deliver high-quality results. 2. Mobile Solutions: We recognize the importance of mobility in the ever-evolving energy landscape. Lovat Gas Solutions offers mobile energy solutions that can be easily deployed and adapted to your specific requirements. Whether it's mobile power generation, off-grid solutions, or energy storage, we have the flexibility to meet your needs. 3. Reliability: We understand that reliability is a critical factor in the success of your alternative energy projects. Our commitment to delivering reliable solutions is ingrained in every aspect of our work. You can rely on our expertise and experience to provide solutions that consistently meet your energy demands. 4. Environmental Responsibility: At Lovat Gas Solutions, we prioritize environmental responsibility in all our endeavors. Our alternative energy solutions are designed to minimise carbon emissions, reduce environmental impact, and contribute to a sustainable future. We take pride in helping our clients transition to cleaner energy sources with a focus on sustainability. Partner with Lovat Gas Solutions to unlock profitable alternative energy solutions. We are dedicated to understanding your unique energy needs, designing innovative solutions, and delivering tangible results. Whether you require short-term solutions or long-term strategies, our team is here to support your transition to new energy frontiers. Contact us today to discuss your alternative energy goals. Let our experienced team guide you through the process, providing you with mobile, reliable, innovative, and environmentally responsible solutions that drive profitability and contribute to a greener future. Trust Lovat Gas Solutions to be your partner in successful alternative energy initiatives.
Service
In Stock
Service
New
ISO
Land Freight
Gas Expertise
Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions.
Service
In Stock
Service
New
ISO
Land Freight
Natural Gas
Reliable Gas Supply Solutions: Your Peace of Mind with Lovat Gas Solutions When you reach out to Lovat Gas Solutions, it's because you have a pressing need for gas. We understand the urgency and importance of resolving this issue promptly and efficiently. That's why we take our job seriously – to provide you with a gas supply solution that not only solves your immediate problem but also ensures a seamless experience without creating further headaches for your business. At Lovat Gas Solutions, we pride ourselves on our ability to develop and execute reliable gas supply solutions tailored to your specific application. We prioritize understanding your unique needs and challenges, working closely with you to devise a solution that effectively and consistently meets your requirements. Why choose Lovat Gas Solutions for your gas supply needs? 1. Customer-Centric Approach: Your satisfaction is our top priority. We listen attentively to your concerns, taking the time to understand the intricacies of your gas supply requirements. Our dedicated team is committed to developing and executing a solution that reliably solves your problem without causing additional complications. 2. Reliability: We recognize the critical importance of reliable gas supply for your business operations. With our extensive industry experience and expertise, we ensure that the gas supply solution we provide is dependable, allowing you to focus on your core business activities with peace of mind. 3. Tailored Solutions: We understand that each application is unique, requiring a customized approach. Our team of experts takes a proactive and innovative approach to develop a solution that precisely addresses your gas supply needs. Our goal is to exceed your expectations and provide you with a solution that seamlessly integrates into your existing operations. 4. Seamless Execution: At Lovat Gas Solutions, we believe in delivering on our promises. With meticulous planning, efficient execution, and attention to detail, we ensure a smooth transition from gas supply issues to reliable operations. Our commitment to your success is reflected in our dedication to providing a hassle-free experience. When you choose Lovat Gas Solutions, you choose a partner that takes your gas supply needs seriously. We are dedicated to solving your gas supply challenges without creating further headaches for your business. Contact us today, and let our experienced team develop and execute a reliable gas supply solution that meets your unique requirements. Experience peace of mind with Lovat Gas Solutions as your trusted gas supply partner.
Service
In Stock
Service
New
ANSI
Land Freight
Mobile Gas Equipment
Custom Designed Gas Solutions: Your Partner in Customized Excellence with Lovat Gas Solutions At Lovat Gas Solutions, our approach is simple yet effective: we develop custom gas solutions that are specifically designed to meet the unique requirements of your application. As a service-oriented company, we are dedicated to delivering solutions that work seamlessly for your business. It is this commitment to excellence that sets us apart and earns us the loyalty of our valued customers. Why choose Lovat Gas Solutions for your custom gas needs? 1. Tailor-Made Solutions: We understand that your business has distinct requirements and challenges. That's why we take a personalized approach to develop solutions that are specifically tailored to your application. Whether you need a gas supply solution, operational support, or a comprehensive project plan, we design and deliver the solution that perfectly fits your needs. 2. Customer-Centric Focus: Your satisfaction is our top priority. We value your partnership and strive to build long-lasting relationships based on trust and exceptional service. Our team of experts takes the time to listen to your needs, understand your goals, and work collaboratively to deliver the optimal solution for your business. 3. Service-Oriented Approach: Lovat Gas Solutions is committed to providing the highest level of service to our customers. From the initial consultation to ongoing support, we prioritize responsiveness, reliability, and open communication. Our dedicated team is always ready to address your questions, concerns, and evolving needs. 4. Proven Track Record: Our customers love working with us because we consistently deliver results. With a wealth of industry experience, our team has a proven track record of success in developing and implementing effective gas solutions across various sectors. We are confident that we can exceed your expectations and provide you with a solution that works seamlessly for your application. Choose Lovat Gas Solutions as your partner for custom gas solutions. Experience the difference of working with a company that is dedicated to developing tailored solutions that deliver optimal results for your business. Contact us today to discuss your specific needs, and let our experienced team design a custom gas solution that works for you. Together, we will achieve excellence and drive your success with Lovat Gas Solutions.
Service
Made to Order
Service
New
ISO
Land Freight
Virtual Pipeline
Leading the Way in Mobile Energy Solutions: Cost-Effective, Clean, and Renewable Lovat Gas Solutions is proud to be at the forefront of delivering cutting-edge mobile energy solutions to a wide range of industries, including utilities, mining, oil & gas, and other industrial sectors. Our goal is simple: to provide cost-effective, clean alternative, and renewable energy solutions that meet the diverse needs of our clients. Why choose Lovat Gas Solutions for your mobile energy needs? 1. Cost-Effective Solutions: We understand the importance of cost efficiency for our clients. Our team of experts is dedicated to designing and implementing mobile energy solutions that optimize your energy consumption, reduce expenses, and enhance operational efficiency. We work closely with you to develop strategies that deliver significant cost savings without compromising on performance or reliability. 2. Clean Alternative Energy: Embracing the shift towards cleaner energy sources, Lovat Gas Solutions offers a range of clean alternative energy solutions. Whether it's through the utilization of natural gas, renewable natural gas (RNG), hydrogen, or other sustainable energy options, we help you reduce your carbon footprint and contribute to a greener future. 3. Renewable Energy Expertise: As renewable energy continues to gain momentum, our team stays at the forefront of developments and innovations in the industry. We possess the expertise and experience to integrate renewable energy sources into your mobile energy solutions, harnessing the power of solar, wind, bioenergy, and more. 4. Industry Focus: With a deep understanding of the specific needs and challenges faced by utilities, mining companies, oil & gas operators, and industrial end-users, we tailor our mobile energy solutions to suit your industry requirements. We have a proven track record of delivering exceptional results across these sectors, ensuring that our solutions are aligned with your unique operational demands. Partner with Lovat Gas Solutions to access cost-effective, clean alternative, and renewable energy solutions. We are committed to providing you with the most advanced mobile energy technologies and strategies that deliver tangible benefits to your business. Contact us today to discuss your specific mobile energy needs and let our experienced team design a customized solution that propels your operations forward. Together, let's lead the way in mobile energy solutions and drive success for your business with Lovat Gas Solutions.
Service
In Stock
Service
New
ISO
Land Freight
Back Pressure Turbine
Introducing the Kessels MS-32 Multistage Steam Turbine: Your Ultimate Back-Pressure Solution In the dynamic world of industrial steam turbines, efficiency, reliability, and flexibility are paramount. At Kessels Steam Turbines, we understand the unique needs of the oil and gas industry, where the demand for steam is relentless. That's why we are proud to introduce our MS-32 Multistage Steam Turbine – the pinnacle of back-pressure turbine technology. The Power of Back Pressure Turbines Back pressure turbines have long been a cornerstone of industrial steam applications, and they come in both single-stage and multi-stage options. These turbines serve as the vital link between the boiler unit and the process steam header. In environments where a copious amount of steam is required, back pressure turbines shine. Straight-Back Pressure for Maximum Efficiency What sets back pressure turbines apart is their straight-back pressure nature. This design allows for the efficient utilization of exhaust steam to meet process demands. The electrical power generated during the process is consumed precisely as needed, making it an energy-efficient choice. Applications Galore Our MS-32 Multistage Steam Turbine is a versatile powerhouse, ideally suited for a wide range of applications: Drive Applications: Commonly employed in the oil and gas industry, sugar mills, sugar fibrizor systems, shredder drives, pump drives, and many more. Power Generation Applications: Utilized to generate electricity by powering generators, offering a clean and sustainable energy solution. Bleed Back-Pressure Steam Turbines For scenarios where controlled extraction of steam within a medium pressure range is necessary, our turbines come equipped with bleed points. This feature allows for steam extraction at low volume steam demands, making it perfect for applications with high tolerance for pressure variations. Extraction Back-Pressure Steam Turbines When the process steam demand volume is substantial, and tolerance for pressure variations is minimal, our steam turbines with controlled extraction vents step up to the plate. Operating under intermediate pressure levels, they ensure a consistent and reliable steam supply. Why Choose Kessels? When you choose Kessels Steam Turbines, you're choosing more than just a product – you're choosing a legacy of excellence. With a history spanning decades, we have continuously pushed the boundaries of steam turbine technology. Our MS-32 Multistage Steam Turbine is a testament to our unwavering commitment to innovation, performance, and customer satisfaction. Unmatched Benefits of the MS-32 Multistage Steam Turbine: Energy Efficiency: Our turbines maximize the use of exhaust steam, minimizing wastage and lowering energy costs. Reliability: Built with precision and rigorously tested, the MS-32 ensures uninterrupted operations, even in demanding environments. Versatility: From drive applications to power generation, this turbine adapts to your needs with ease. Eco-Friendly: Harnessing the power of steam for electricity generation reduces carbon emissions, contributing to a greener future. Responsive Support: Our team of experts is always at your service, ready to assist with installation, maintenance, and troubleshooting. Upgrade to Excellence Today In the competitive world of the oil and gas industry, every advantage counts. Make the smart choice by upgrading to the Kessels MS-32 Multistage Steam Turbine – the epitome of efficiency, reliability, and sustainability. Contact us today to learn more about how our turbine can revolutionize your operations and propel your success into the future. Your journey to unparalleled performance starts here, with Kessels Steam Turbines.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Back Pressure Turbine
Unleash Power and Precision with the Kessels MS-42 EB Multistage Steam Turbine: Your Ultimate Back-Pressure Solution In the high-stakes world of the oil and gas industry, precision and performance are non-negotiable. That's why, at Kessels Steam Turbines, we're proud to introduce our cutting-edge MS-42 EB Multistage Steam Turbine – a powerhouse engineered to redefine excellence in back-pressure turbine technology. Mastering Back-Pressure Turbines Back pressure turbines have been the workhorses of industrial steam applications for decades, and our MS-42 EB takes their capabilities to new heights. Whether it's single-stage or multi-stage options, these turbines serve as the critical bridge between the boiler unit and the process steam header, revolutionizing steam utilization and power generation. Efficiency Redefined Our MS-42 EB Multistage Steam Turbine boasts the hallmark of back pressure turbines: their straight-back pressure nature. This design ensures the efficient harnessing of exhaust steam, meeting process demands with unparalleled precision. Every ounce of electrical power generated is consumed as per the process steam demand, offering unmatched efficiency. Applications Beyond Boundaries At Kessels, we understand that diverse industries have unique demands. That's why our MS-42 EB Multistage Steam Turbine excels in a wide range of applications: Drive Applications: Embrace the power of our turbine in oil and gas operations, sugar mills, sugar fibrizor systems, shredder drives, pump drives, and more. Wherever drive power is needed, Kessels delivers. Power Generation Applications: Elevate your sustainability game by using our turbine to generate electricity, powering generators with clean and efficient steam energy. Bleed Back-Pressure Steam Turbines Our commitment to versatility is evident in the design of the MS-42 EB. With built-in bleed points, uncontrolled extraction vents enable steam extraction within a medium pressure range. This feature proves invaluable in situations where bleeding steam is required at low volume steam demands and when there's a high tolerance for pressure variations. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines When your process steam demand volume is substantial, and you can't compromise on pressure variations, our steam turbines with controlled extraction vents come to the rescue. These turbines operate under intermediate pressure levels, ensuring a steady and reliable steam supply that your operations can depend on. Why Choose Kessels? Choosing Kessels Steam Turbines means choosing a legacy of excellence, innovation, and reliability. Our MS-42 EB Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization and minimize wastage with our precision-engineered turbine. Reliability Redefined: Rigorously tested and built with unwavering precision, the MS-42 EB ensures your operations run seamlessly. Unparalleled Versatility: Adapt to changing needs effortlessly, whether it's drive applications or eco-friendly power generation. Sustainability at Its Core: Harness the power of steam for electricity generation, reducing your carbon footprint and contributing to a greener future. Expert Support: Our team of specialists is always at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-42 EB Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you towards a future of success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Back Pressure Turbine
Elevate Your Energy Solutions with the Kessels MS-52 Multistage Steam Turbine: Unleash Power, Precision, and Performance In the ever-evolving realm of steam turbine technology, Kessels Steam Turbines stands as a beacon of innovation and excellence. For the oil and gas industry, where power and precision are paramount, our MS-52 Multistage Steam Turbine is the ultimate solution – engineered to surpass expectations and redefine industry standards. Dominating Back Pressure Turbines Back pressure turbines, available in both single-stage and multi-stage configurations, serve as the vital link between boiler units and process steam headers. These turbines are the backbone of industries that demand a copious amount of steam, revolutionizing the utilization of steam and electricity generation. The Art of Efficiency At the heart of the MS-52 Multistage Steam Turbine is the hallmark of back pressure turbines: the straight-back pressure design. This engineering marvel ensures the seamless harnessing of exhaust steam, matching process demands with unparalleled precision. Every unit of electrical power generated is consumed as per the process steam demand, making it a pinnacle of efficiency. Applications Without Limits Our MS-52 turbine is not just a machine; it's a versatile workhorse ready to excel in various applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Take a giant leap towards sustainability by utilizing our turbine to generate electricity. It powers generators with clean and efficient steam energy, reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-52 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are the order of the day. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a steady and reliable steam supply that your operations can depend on. The Kessels Advantage Choosing Kessels Steam Turbines is more than a business decision; it's a choice of a partner committed to your success. Our MS-52 Multistage Steam Turbine embodies our unwavering dedication to innovation, performance, and customer satisfaction. Key Benefits of the MS-52 Multistage Steam Turbine: Unparalleled Efficiency: Maximize steam utilization while minimizing waste. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations. Unmatched Versatility: Adapt effortlessly to changing needs, be it for drive applications or sustainable power generation. A Greener Future: Harness steam power for electricity generation, reducing your environmental impact. Dedicated Support: Our team of experts is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Back Pressure Turbine
Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Back Pressure Turbine
Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Back Pressure Turbine
Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Multistage Turbine
Experience Unmatched Efficiency with the Kessels MS-42E Extraction Condensing Steam Turbine: Your Power and Steam Solution In the fast-paced world of the oil and gas industry, precision, reliability, and efficiency are the cornerstones of success. Kessels Steam Turbines is proud to introduce the MS-42E Extraction Condensing Steam Turbine, a technological marvel designed to exceed your expectations and redefine excellence in steam turbine technology. Mastering Extraction Condensing Turbines Extraction condensing turbines are the beating heart of industries where a constant pressure steam flow is essential for various processes. The MS-42E shares constructional characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Finest What sets the MS-42E apart is its ability to inject low-pressure steam from the second admission valve chest, efficiently utilizing available plant resources to meet power demands. This makes our turbine a vital player in co-generation scenarios, where it caters to both the power and steam requirements of your process plant. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is crucial, the MS-42E shines. This turbine ensures that your power generation remains steady, providing a reliable foundation for your operations. The Ultimate in Versatility At Kessels, we understand that every industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-42E is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines is not just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-42E Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Utilize low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Built with precision and rigorously tested, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience steady power generation, regardless of variations in process steam demands, ensuring your operations run smoothly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with confidence in Kessels' expertise. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-42E Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Multistage Turbine
Revolutionize Your Power and Steam Needs with the Kessels MS-52 EC Extraction Condensing Steam Turbine: Efficiency Redefined In the dynamic world of the oil and gas industry, where precision, reliability, and efficiency are paramount, Kessels Steam Turbines presents the MS-52 EC Extraction Condensing Steam Turbine. This technological marvel is designed to surpass your expectations, setting new standards in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the lifeblood of industries that demand a constant pressure steam flow for diverse processes. The MS-52 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency at Its Zenith What sets the MS-52 EC apart is its unique ability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-52 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. The Ultimate in Versatility At Kessels, we understand that each industry has its unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-52 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-52 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Multistage Turbine
Elevate Your Energy Solutions with the Kessels MS-201 EC Extraction Condensing Steam Turbine: Efficiency Perfected In the dynamic world of the oil and gas industry, precision, performance, and sustainability are non-negotiable. Kessels Steam Turbines is proud to introduce the MS-201 EC Extraction Condensing Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Extraction Condensing Turbines Extraction condensing turbines are the lifeline of industries requiring a constant pressure steam flow for diverse processes. The MS-201 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a reliable source of constant pressure steam for your operations. Efficiency at Its Pinnacle What distinguishes the MS-201 EC is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-201 EC shines. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-201 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-201 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Multistage Turbine
Unlock Unparalleled Efficiency with the Kessels MS-251 EC Extraction Condensing Steam Turbine: Where Precision Meets Power In the ever-evolving landscape of the oil and gas industry, precision, reliability, and sustainability reign supreme. Kessels Steam Turbines is proud to introduce the MS-251 EC Extraction Condensing Steam Turbine, a technological marvel that redefines excellence in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the backbone of industries demanding a constant pressure steam flow for diverse processes. The MS-251 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency Perfected What sets the MS-251 EC apart is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-251 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-251 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-251 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-251 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Single Stage Turbine
Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Single Stage Turbine
Elevate Your Operations with Kessels API-611 Compliant Steam Turbine: Where Precision Meets Excellence In the demanding realm of the oil and gas industry, precision, reliability, and adherence to standards are paramount. Kessels Steam Turbines takes pride in being a premier supplier of Steam Turbines that not only comply with but exceed the rigorous API-611 standards for general-purpose steam turbines. Setting New Standards in Steam Turbine Excellence Kessels Steam Turbines are at the forefront of driving pumps, fans, and compressors in Oil Refineries across the Middle East, India, and South East Asia. These turbines stand as testaments to our unwavering commitment to adhering to stringent design engineering practices set by oil giants and discerning end customers alike. Distinguishing Features of Kessels API-611 Single Stage Steam Turbines: Meets & Exceeds API-611 Standard: Our turbines not only meet but go beyond the API-611 standard, ensuring top-notch performance and reliability. Direct Drive Oil Relay Governors: Equipped with provisions for Direct Drive Oil relay constant speed governors conforming to NEMA class 'A' & NEMA class 'D'. Over Speed Mechanical Trip: Safety is paramount, and our turbines come with an over-speed mechanical trip with safety shut-off as standard. Versatile Gland Sealing: Gland sealing is achieved through carbon rings (up to six, removable), labyrinths, or mechanical steam seals. We offer the flexibility of choosing any combination of these three options. Impulse-Type Wheels: Provision for Single disc single-row, and Single disc two-row Curtis impulse-type wheels made of forged steel. Built-in Steam Strainer: As a standard feature, our turbines include a built-in steam strainer that is removable for your convenience. Versatile Support: Our turbines can be centerline or foot-mounted, offering flexibility in installation. Solenoid Trips: Provision for solenoid trips for remote shutdowns comes as standard, ensuring safety and control. Suitable for High Pressures: Built to handle high inlet and exhaust steam pressures, our turbines are robust and reliable. Horizontal and Vertical Orientation: Choose between horizontal and vertical shaft orientation to suit your specific needs. These features are a testament to our unwavering commitment to ensuring that customers can operate Kessels API-611 compliant Steam Turbines with complete peace of mind for their mechanical driving needs. Choose Kessels for Unparalleled Excellence Choosing Kessels Steam Turbines is a choice for excellence, precision, and reliability. Our API-611 Compliant Steam Turbines not only meet industry standards but surpass them, ensuring the highest levels of performance and safety for your operations. Empower Your Operations with Kessels In the competitive landscape of the oil and gas industry, precision and reliability are non-negotiable. Elevate your operations with the Kessels API-611 Compliant Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Pressure Reducing Valve Turbine Replacement
Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Bag Oil Spill Kit, includes: Oil-Only Absorbent Pads, Oil-Only Absorbent Pillows, Oil-Only Absorbent Socks, Disposal Bags, and Nitrile Gloves
The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Oil Spill Kit – 41 Gallon Drum
The Oil Only Absorbent Spill Kit - 41-Gallon contains, The 41-Gallon Oil Only Absorbent Spill Kit is a comprehensive solution for managing medium-sized spills in marine environments, refineries, and loading docks. Designed for versatility and effectiveness, the kit includes, 50 Absorbent Pads (8” x 11.5”) Versatile pads for quick and efficient absorption of oil-based liquids, ideal for various spill scenarios. 4 Sorbent Socks (3” x 4Ft) Specially designed to contain and absorb spills, particularly in confined or challenging areas. 8 Pillows (18” x 18”) Large pillows for absorbing and retaining significant quantities of oil, enhancing spill response efficiency. 1 Pair of Nitrile Gloves Essential personal protective equipment for safe handling during spill cleanup. 5 Disposal Bags Ensures proper containment and disposal of used absorbent materials, contributing to responsible waste management. 1 Gallon Drum (55) A larger containment option for collecting and managing absorbed liquids. Part Number: OH-OOS-41G The kit is specifically tailored for medium spills in marine environments, refineries, and loading docks, offering a comprehensive and efficient response to oil-based spills. Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Spill Kit, inclusive: absorbent pads, pillows, socks, disposal bags, nitrile gloves
The spill kit contains, 5 Oil-Only Absorbent Pads, 3 Oil-Only Absorbent Pillows, 2 Oil-Only Absorbent Socks (3"x4'), Disposal bags, Nitrile gloves. This spill kit for effective and efficient cleanup and containment of oil-based spills in various settings. The kit, equipped with Oil-Only Absorbent Pads, Pillows, Socks, disposal bags, and Nitrile gloves, provides a comprehensive solution for managing and addressing oil spills. It can be particularly useful in industrial facilities, storage areas, transportation operations, or any environment where oil-based liquids are handled. The spill kit has a total absorption capacity, capable of soaking up 15 liters (3.87 gallons) of liquid. This means that oil-based spills, the combined capabilities of the Oil-Only Absorbent Pads, Pillows, and Socks within the kit allow for the containment and absorption of up to 15 liters of spilled liquids. This substantial capacity ensures that the spill kit is well-equipped to handle moderate to sizable spills, making it a reliable and effective solution for various industrial and environmental settings. Oil-Only Absorbent Pads Oil-Only Absorbent Pads are highly effective for the rapid cleanup of oil-based spills. Made from polypropylene material, these pads are specifically engineered to selectively absorb oils while repelling water. The pads boast a fine-fiber construction, allowing for quick absorption and retention of oil-based liquids. With a size of 12” x 12”, these pads are versatile and can be used in various settings, including industrial facilities, automotive workshops, and marine environments. Oil-Only Absorbent Pillows Oil-Only Absorbent Pillows are strategically deployed on oil-based spills for rapid absorption. Their polypropylene construction ensures targeted cleanup, selectively absorbing oils while repelling water. These pillows contribute to the efficiency and environmental responsibility of spill response in workplaces where oil-based liquids are handled. Oil-Only Absorbent Socks (3"x4') Oil-Only Absorbent Socks are placed to create a barrier, containing, and preventing the spread of oil-based spills. It allows to adapt to different surfaces, ensuring efficient and targeted spill response. These socks are integral components of spill kits and are valuable in various industries where oil-based liquids are handled. Usage of Disposal bags Disposal bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met oil-based spills. Nitrile gloves Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. Applications: • Integral part of spill kits • Used in industrial facilities, and areas handling oil-based liquids.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
InWaTec Combined: Streamlining Well Integrity with Expert Mechanical Plug Operations In the intricate sphere of well servicing, the ability to effectively isolate sections of the wellbore is crucial. At InWaTec Combined, we specialize in providing top-tier Pulling and Setting Mechanical Plug services that ensure well integrity through precision and reliability, all achieved via mechanical wireline manipulation. Sophisticated Simplicity in Well Isolation Our mechanical plug services are designed to provide a seamless solution for wellbore isolation. The mechanical plugs can be set using the finesse of wireline operations alone, without the need for complex hydraulic systems. This method exemplifies our commitment to sophisticated yet simple solutions, providing our clients with a straightforward and efficient means to secure their wells. Tailored Tools for Diverse Requirements Recognizing that wells come in various sizes and specifications, InWaTec Combined has developed a selection of running tools to match. Depending on the size of the mechanical plug, we employ one of two specialized running tools. Each tool is designed to engage with the plug precisely, ensuring a secure and accurate setting every time. Versatility Across Operations Whether it’s a routine intervention or an emergency response, our Pulling and Setting Mechanical Plug services are versatile enough to adapt to the specific needs of the operation. This versatility is a testament to the depth of our expertise and the breadth of our technological capabilities. Efficiency in Execution The use of mechanical wireline manipulation for setting and pulling plugs not only provides precision but also enhances operational efficiency. By eliminating the need for additional hydraulic equipment, we can execute operations more quickly, reducing downtime and optimizing well productivity. A Commitment to Operational Excellence At InWaTec Combined, our services are underpinned by a steadfast commitment to operational excellence. We don’t just deliver tools and technologies; we provide a partnership that prioritizes the integrity and productivity of your well operations. Our experienced technicians and state-of-the-art equipment stand ready to deliver results that exceed expectations. Conclusion: Ensuring Well Integrity with Precision In conclusion, InWaTec Combined's Pulling and Setting Mechanical Plug services represent the pinnacle of well intervention solutions. Our precision-engineered tools and expert wireline manipulation techniques ensure that well integrity is maintained with the utmost efficiency and reliability. Trust InWaTec Combined to be your partner in well servicing operations, where every plug set is a step towards ensuring the ongoing success and safety of your well activities.
Service
In Stock
Service
New
API
Land Freight
Cap Lamp Complete Kit
Empower Your Work with the Wisdom All-in-One Toolkit – A Comprehensive Solution from Provix Provix is proud to present the Wisdom All-in-One Toolkit, a versatile and comprehensive lighting solution tailored for professionals in mining, construction, and other demanding industries. This toolkit is designed to provide everything you need for effective and reliable illumination in various work environments. Complete Set for Varied Lighting Needs The All-in-One Toolkit includes: • A Wisdom 3A or 4A Cap Lamp, offering powerful and adjustable illumination. • A Magnetic USB Wire and Magnetic Connector for easy and secure charging. • Three lenses: Lens #1, Lens #4 (red), and Lens #6, to suit different lighting conditions and preferences. • A Power Supply with a US Plug, ensuring your lamp is always charged and ready to go. • A comfortable Head Strap for hands-free operation. High-Performance Lighting Features With a Panasonic battery of 2*3.5 = 7.0Ah, the cap lamp in this toolkit offers exceptional brightness levels of 1,800 | 12,000 | 25,000 LUX and luminosity of 50 | 265 | 533 LM. It provides long working times of 60 | 13 | 5 hours and impressive lighting ranges of 85 | 219 | 316 meters, ensuring you have the right amount of light for any task. Versatile and User-Friendly Designed for versatility, the All-in-One Toolkit caters to various professional needs, from mining and construction to emergency response and outdoor activities. The different lenses allow for customization of the light beam, enhancing visibility and efficiency in diverse working conditions. Durable and Reliable The toolkit components are built to withstand the rigors of tough working environments. The robust construction of the cap lamp and accessories ensures longevity and reliability, making this toolkit a valuable investment for professionals. Elevate Your Lighting Experience Upgrade your lighting gear with the Wisdom All-in-One Toolkit from Provix. This comprehensive set is your solution for effective, versatile, and dependable lighting in any professional setting. Visit www.provix.net to learn more about this essential toolkit and explore our range of high-quality mining equipment.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Harmonizing Field Operations with Nulux Network Solutions: Elevating Field-bus Cabling in the Oil and Gas Sector The labyrinthine networks of the oil and gas industry necessitate not only precise and accurate communication but also a robust data transfer pathway that remains unflinchingly reliable amidst the operationally intense environments. Nulux Network Solutions, seasoned with two decades of expertise, introduces meticulous and operationally integral Field-bus Cabling Solutions. Why Nulux Shines in the Networking Cosmos When your business demands a network infrastructure that serves as an impervious and ever-reliable backbone, the bespoke solutions provided by Nulux ascertain that your operations remain perennially seamless. Our extensive experience spans myriad industrial projects, including crucial DCS network upgrades across North America, establishing us as a linchpin in telecommunication and networking sectors. Championed by a team devoutly centered around unyielding perfectionism, Nulux not only provides but enhances copper cabling systems, ensuring they are not merely conduits but formidable and resolute pathways for your data to traverse through. Crafting Copper Networks with Nuanced Precision At Nulux, our copper network services are not confined to mere installation but envelop a 360-degree solution space that guarantees: Meticulous design, planning, and installation of new/existing networks Strategic upgrades to bolster operational efficiency Bespoke solutions catering to voice, data, and video services Tailored approaches meeting your distinct requirements Sustained technical support across your project’s lifecycle Copper, as a medium, brings forth myriad benefits to your network infrastructure, including high-bandwidth transmission (up to 10 Gbps), pronounced reliability, effortless installation, cost-effectiveness, and the inherent flexibility, reliability, and durability essential for operationally intense industries. Nulux’s Field-bus Cabling Solutions: A Nexus between Technology and Operational Excellence Your field-bus networks are not mere communication channels but the vital sinews that link your operational components into a cohesive and synchronous unit. Nulux’s Field-bus Cabling solutions are meticulously crafted, ensuring: Operational Harmony: Linking your diverse field devices and controllers into a synchronized operational entity Data Integrity: Ensuring data packets traverse through your networks with fortified security and integrity Reduced Downtime: Minimizing operational disruptions through a reliable and constant communication channel Enhanced Diagnostics: Facilitating real-time data transfers that enable precise control and diagnostics Scalability: Providing a network that evolves in tandem with your operational expansions and technological integrations Entrust Your Operations with Nulux In the relentless and unforgiving operational theatres of the oil and gas industry, where every byte of data is pivotal, Nulux’s Field-bus Cabling Solutions stand as a silent sentinel ensuring your operations are perpetually communicated, coordinated, and controlled with unyielding reliability. With an in-depth understanding of what truly fuels operational competitiveness in your industry, our hard-working team assures that while you steer your focus towards your core operations, your field-bus network functions as an unwavering, steadfast, and efficient data highway. Invigorate your operations with Nulux Network Solutions, ensuring every device, controller, and operational node in your field is perpetually in symphony, dictating a future where your operations and network are in seamless unison. Reach out to Nulux Network Solutions for an initial consultation and begin a journey where your field-bus network becomes a catalyst for operational excellence and reliability.
Service
In Stock
Service
New
ISO
MGN-Downhole Flat Bottom Magnet
Introducing the MGN Flat Bottom Downhole Magnet from Marlin Oil Tools: The Premier Solution for Well Cleaning and Debris Removal in the Oil and Gas Industry Marlin Oil Tools is proud to unveil the MGN Flat Bottom Downhole Magnet, a specialized downhole tool engineered to address the critical need for thorough well cleaning in oil and gas operations. Designed to efficiently remove small metal debris, such as chips and scale, the MGN Flat Bottom Downhole Magnet is essential for maintaining the integrity and operational efficiency of wells. With its unique flat bottom design and internal passage for simultaneous flushing, this tool is a game-changer for well work preparation. Key Features of the MGN Flat Bottom Downhole Magnet: Optimized Debris Removal: The flat bottom design enhances the magnet's ability to capture and remove metal debris from the well, ensuring a cleaner wellbore environment. Simultaneous Well Flushing: Features an internal passage hole, allowing for well flushing during magnet operation, thereby maximizing cleaning efficiency and reducing downtime. Versatile Design: Capable of accommodating various well conditions with a magnetic surface that can be located along the tool body or from the end, offering flexibility in application. Customizable Connections: Marlin Oil Tools provides customizable connecting threads to ensure seamless integration with your existing downhole tool configurations. Prevention of Complications: By removing foreign metal objects and debris, the MGN Flat Bottom Downhole Magnet minimizes the potential for operational complications and accidents. Essential for Well Maintenance: Acts as a crucial step in well work preparation, helping to clear the way for further well intervention and maintenance activities. Elevate your well intervention and maintenance strategies with the MGN Flat Bottom Downhole Magnet from Marlin Oil Tools, a leading-edge solution for effective well cleaning in the oil and gas sector. This downhole magnet is specifically designed to remove metal debris, ensuring well integrity and operational efficiency. With its unique flat bottom design and internal flushing capability, the MGN Flat Bottom Downhole Magnet stands out as an essential tool for any well work preparation, offering customizable connections for a perfect fit with your operations. Choose Marlin Oil Tools for reliable, efficient, and versatile well cleaning solutions. Why Choose the MGN Flat Bottom Downhole Magnet from Marlin Oil Tools? Superior Cleaning Efficiency: Designed to effectively capture and remove a wide range of metal debris from wells. Operational Versatility: Adapts to various well conditions and integrates seamlessly with your BHA for comprehensive cleaning. Enhanced Safety Measures: By clearing metal debris, it significantly reduces the risk of downhole complications and accidents. Customization Options: Offers tailor-made connecting threads to fit your specific operational requirements and tool setups. The MGN Flat Bottom Downhole Magnet by Marlin Oil Tools represents the forefront of downhole cleaning technology, providing operators with a robust tool for enhancing well performance and safety. Incorporate the MGN Flat Bottom Downhole Magnet into your well maintenance protocols to achieve cleaner, safer, and more efficient well operations.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Gauge Parts
At Houston Digital Instruments (HDI Gauges), we prioritize providing our customers with cost-effective solutions that maximize the lifespan and performance of our products. We understand the importance of minimizing downtime and inventory costs while ensuring optimal functionality. That's why we offer a range of options for maintenance and repair, including spare parts, batteries, and repair kits. Additionally, our certified repair and calibration services guarantee the highest level of quality and precision. Let's explore how HDI Batteries, Parts, and Repair Kits can enhance your operational efficiency. Field Repairability: Minimize Lifecycle Costs HDI products are designed with field repairability in mind, significantly reducing the lifecycle costs associated with using our instruments. We believe in empowering our customers to perform maintenance and repairs on their own, enabling them to minimize downtime and spare unit inventory costs. Our DIY maintenance options are user-friendly and straightforward, ensuring that you can quickly resolve issues and keep your operations running smoothly. Spare Parts and Batteries: Keep Your Instruments Performing Optimally To support your maintenance efforts, HDI offers a comprehensive range of spare parts and batteries for our products. Whether you need replacement components, sensors, connectors, or other essential parts, our inventory has you covered. By utilizing genuine HDI spare parts, you can maintain the integrity and performance of your instruments, ensuring accurate and reliable measurements in the field. Furthermore, HDI batteries are specifically designed to deliver long-lasting power and reliability. We understand the critical nature of uninterrupted operation, and our batteries are engineered to provide optimal performance, even in demanding environments. With HDI batteries, you can trust that your instruments will continue to perform at their best, enhancing your productivity and efficiency. Repair Kits: Convenient Solutions for Maintenance and Repairs HDI Repair Kits are carefully curated packages that include all the necessary components and tools to perform maintenance and repairs on your HDI instruments. These kits are designed to simplify the process, providing you with a convenient solution to address common issues quickly. With HDI Repair Kits, you can efficiently resolve minor problems, minimize downtime, and restore your instruments to peak performance. Certified Repair and Calibration: Uncompromising Quality and Precision For more complex repairs or calibration needs, HDI offers certified repair and calibration services. If you prefer to have our expert technicians handle the maintenance and calibration of your instruments, simply ship them back to HDI. Our skilled professionals will carefully assess, repair, and calibrate your instruments, ensuring they meet our stringent quality standards. With HDI certified repair and calibration, you can have complete confidence in the accuracy and reliability of your instruments. HDI Batteries, Parts, and Repair Kits provide you with comprehensive solutions to enhance the lifespan and performance of your HDI instruments. Our commitment to field repairability allows you to minimize lifecycle costs, reduce downtime, and optimize inventory management. By utilizing genuine HDI spare parts, reliable batteries, and convenient repair kits, you can keep your instruments performing at their best. Additionally, our certified repair and calibration services ensure uncompromising quality and precision. Trust HDI Gauges for all your maintenance and repair needs, and experience the benefits of our cost-effective solutions. Contact HDI today to explore our range of batteries, parts, and repair kits tailored to meet your specific requirements.
Buy
In Stock
Manufacturer
New
API
Air Freight
Hydraulic Hose
Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar.
Buy
In Stock
Product
New
ANSI
Sea Freight
Cybersecurity
Empower Your Mobile Security with ALCiT's Wandera Partnership In today's digital landscape, where threats are omnipresent, your mobile devices stand as gateways to your digital world. With 87% of successful mobile phishing attacks originating outside of emails, and 57% of organizations having fallen victim to mobile phishing incidents, the need for fortified mobile threat defense is undeniable. That's where ALCiT's partnership with Wandera steps in. Wandera: Your Guardian in Mobile Security Amidst the ever-evolving threat landscape, Wandera emerges as a beacon of mobile security. With cutting-edge intelligence at its core, Wandera's threat defense stands as a formidable fortress against threats targeting your mobile devices. ALCiT proudly joins forces with Wandera to ensure your mobile landscape is fortified and resilient. Wandera's Armor: Unveiled Phishing Protection: 87% of successful mobile phishing attacks occur beyond emails, but with Wandera, you're secured. Experience comprehensive protection against phishing attempts that threaten your mobile domain. Malware Defense: Mobile malware knows no bounds, but neither does Wandera's prowess. Shield your devices from mobile malware, safeguarding your digital space. Cost Control and Reduction: Wandera isn't just a security guardian; it's a cost-effective ally. Control and reduce costs across your mobile fleet, ensuring both security and efficiency. Preserve Your Reputation: In today's digital age, reputation is paramount. Wandera shields your company's reputation by preventing mobile threats that could compromise your integrity. Unlock a Secure Mobile Future With ALCiT's partnership with Wandera, the power to safeguard your mobile realm is within your grasp. Embrace the future of mobile security – one that's fortified, intelligent, and responsive to threats. Secure Your Mobile Domain Today ALCiT's partnership with Wandera isn't just a collaboration; it's your shield against mobile threats.
Service
Made to Order
Service
New
ISO
KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.
Service
In Stock
Service
New
ISO
Annual Re-certification
Annual Recertification Made Easy with Safe-T-Whip & Restraints Inc. At Safe-T-Whip & Restraints Inc., we understand the importance of maintaining the highest safety standards in the oilfield industry. That's why we offer a hassle-free and cost-effective Annual Recertification process for our soft rope restraints, ensuring that your equipment remains in peak condition and compliant with safety regulations. Convenient Shipping and Inspection: Our lightweight Safe-T-Whip Restraint system makes shipping to our recertification centers easy and inexpensive. Once received, each restraint undergoes a thorough inspection process, including visual checks and strength testing. This rigorous evaluation guarantees that your restraints are in top-notch condition to continue their crucial safety role. Serialized Registered Documentation: During the recertification process, each restraint is provided with serialized registered documentation. This ensures that every individual restraint is accounted for and easily identifiable. With our comprehensive database, we keep track of each restraint's purchase date and recertification status, giving you complete peace of mind and a reliable record for compliance purposes. Safety-First Inspection Tags: After successfully completing the recertification process, each restraint is equipped with a heavy-duty vinyl inspection tag. The tag is stamped with the new inspection date and securely zip-tied to the restraint. This safety tag serves as a visual indicator to safety inspectors that the restraint has been recertified, contributing to a safer work environment. Documentation Backup and Quick Access: We understand that maintaining documentation can be a challenge on-site. That's why Safe-T-Whip & Restraints Inc. takes the responsibility off your shoulders. We keep all recertification data securely backed-up, ensuring you have easy access to certificates and records whenever needed. Effortless Compliance: With our recertification process, you can be confident in meeting safety compliance requirements effortlessly. Our team is always available to assist with any queries, and should compliance or safety inspectors require it, we can quickly reissue certificates to help you stay compliant and on track. Choose Safe-T-Whip & Restraints Inc. for seamless and reliable Annual Recertification. Our dedication to safety and efficiency ensures that your safety restraints are always up to the task, providing you with peace of mind and full backup. Contact us today to schedule your Annual Recertification and experience safety without compromise.
Service
Made to Order
Service
New
API
Air Freight
Versol M
Introducing BMS VerSol M: The Safe and Effective Solvent for Your Cleaning Needs Cleanstream is thrilled to introduce BMS VerSol M, a safer and more environmentally conscious alternative to harmful solvents such as methylene chloride, acetone, and MEK. Our product is a chemical solvent that provides exceptional cleaning performance while being much safer for the environment than traditional solvents that contain BTEX. BMS VerSol M is a green methylene chloride replacement that is perfect for those who are looking for a more sustainable and safer solution to their cleaning needs. BMS VerSol M is designed to clean corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is highly effective and provides a safer alternative to harmful chemicals like methylene chloride, acetone, and MEK. In addition, BMS VerSol M is a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol M is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol M today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol M and start cleaning with confidence.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Soaring Above Communication Challenges: Nulux Network Solutions Pioneers in Wireless Tower Construction for the Oil and Gas Industry Exploration, extraction, and operational activities in the oil and gas industry are intrinsically bound to the formidable environments - remote locations, vast distances, and oftentimes, challenging terrains. Navigating through these physical barriers to establish a stable, secure, and scalable communication network necessitates innovative and robust solutions. This is where Nulux Network Solutions ascends, bridging the communication divide with unparalleled expertise in Wireless Communication Tower Construction. Pillars of Communication: Why Tower Construction Matters The landscape of the oil and gas sector demands the creation of a network that is not only extensive but also exceptionally reliable. Communication towers become the veritable backbone, linking disparate operations, ensuring data flow, and maintaining a coherence that is vital for smooth functionalities and decision-making processes. Constructing these towers, especially in the arduous terrains that characterize the oil and gas industry, requires a blend of engineering expertise, practical experience, and an acute understanding of wireless communication nuances. Nulux’s Distinction: A Synthesis of Experience and Innovation With an illustrious history in designing and implementing an array of wireless systems and infrastructures, Nulux has emerged as a leader in wireless tower construction and rigging, ensuring that the tapestry of communication across your operations, be it P2P or Multipoint networks, remains uninterrupted and secure. Adaptivity and Scalability: As your operations evolve, so does your communication network. Our towers are constructed with a forward-looking approach, ensuring they are capable of adapting to technological advancements and scalable to accommodate your expanding operational horizons. Reliability in Rigorous Environments: Our construction protocols and strategies are molded by our extensive experience in various terrains and environments, ensuring that the towers stand resilient in the face of geographical and meteorological challenges. A Mesh of Connectivity: Whether linking the executive decisions from central offices to the far-reaching extraction sites or facilitating data-driven operations across the entire network, our towers ensure that every node remains perpetually connected. Navigating Through P2P and Multipoint Networks Understanding and integrating varied network configurations such as P2P and Multipoint networks into our tower construction strategy, we ensure that the specific communicational and operational prerequisites of your business are met. End-to-End P2P Solutions: For secure, dedicated, and high-speed communication between two points, our P2P network solutions, enabled by strategically positioned towers, ensure that your data travels securely and swiftly. Expansive Multipoint Configurations: When the operational framework demands centralized communication with multiple nodes, our towers facilitate a sturdy and coherent multipoint communication network. Your Partner in Progress: Nulux Network Solutions As we stride into the future, where the fusion of technology and operations will become even more intrinsic, Nulux stands as your partner, ensuring that the wireless communication networks powering your operations are not just contemporaneous but also future-ready. Connect with us, and let’s architect a communication network that empowers, enhances, and ensures the seamless functionality of your operations in the oil and gas industry, traversing through the present and into the future.
Service
In Stock
Service
New
ISO
Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath.
Service
In Stock
Service
New
API
Land Freight
Lease GPS Systems with CWB National Leasing: The Road to Business Success In today's fast-paced business landscape, staying ahead of the competition requires efficiency, flexibility, and smart financial decisions. One way savvy business owners are achieving this is by leasing GPS systems through CWB National Leasing. If you're ready to supercharge your business and increase your profits, you've come to the right place. Here's why you should consider leasing GPS systems with us: Get Your Equipment Fast Time is of the essence in business, and we understand that. When you choose to lease GPS systems with CWB National Leasing, you can expect a lightning-fast process. We'll review your application promptly and provide a decision on your lease within 48 hours of your approval. That's right; in just two days, you'll have the green light to acquire the GPS equipment you need. Once approved, we'll notify your chosen equipment dealer, and you can sit back and wait for the delivery of your equipment. Our commitment to swift service ensures that you can start using your GPS systems without unnecessary delays. Increase Buying Power Leveraging your buying power is a key advantage of leasing GPS systems. Rather than making a substantial upfront purchase, you can free up cash by opting for periodic lease payments. This approach allows you to allocate your capital to other critical areas of your business. What's more, with CWB National Leasing, you have the option to add extra features or accessories to your GPS equipment for a small payment increase. It's a strategic way to customize your equipment to meet your specific needs without breaking the bank. With our leasing solutions, you'll truly put the "POW" in buying power! Control Your Cash Flow Effective cash flow management is essential for any business. When you choose to lease GPS systems, you'll benefit from small, manageable payments spread over the lease term. This means your equipment will begin earning you money while you pay it off. The ability to align your expenses with revenue generation makes it easy to maintain a healthy expense-to-revenue ratio. It's a smart financial strategy that allows you to stay in control of your cash flow while reaping the benefits of GPS technology. Seasonal Payment Options At CWB National Leasing, we understand that every business has unique financial cycles. That's why we're all about flexibility. Our leasing solutions are designed to match your revenue patterns. Whether you prefer seasonal, semi-annual, or annual payments, we can structure your lease to align with your business's cash flow. This tailored approach ensures that your GPS system lease remains convenient and sustainable throughout the year. Potential Tax Savings Leasing GPS systems can offer your business potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax benefits rather than depreciating the capital cost of equipment. To fully understand how leasing can benefit the tax position of your business, we recommend consulting your tax advisor. They can provide insights into the specific advantages that leasing GPS systems can offer your unique financial situation. In conclusion, leasing GPS systems with CWB National Leasing is a strategic decision that can help your business thrive. From fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business for success. Take the road to business success with CWB National Leasing today!
Service
In Stock
Service
New
ISO
Hydraulic Excavator
Excavators contain four major pieces - a boom, dipper, bucket, and cab, all of which are located on a rotating platform known as the house. Excavators are versatile pieces of equipment that can be used in the following applications (to name just a few); Digging trenches, holes, and foundations Demolition with hydraulic claws, cutters, and breaker attachments Mining, especially, but not only open-pit mining Driving piles, in conjunction with a pile driver Dredging rivers Drilling shafts and rock blasting Snow removal with snowplow and snow blower attachments Forestry mulching Handling materials Brush cutting with saws and mower attachments General landscaping Forestry work Construction
Buy
Currently in Use
Product
New
DNV
Sea Freight
InWaTec Combined: Enhancing Wellbore Clarity with Advanced Hydrostatic Bailer Services In the diverse and demanding world of well servicing, maintaining a clear and functional wellbore is essential for the efficient operation of drilling rigs, workover operations, and production wells. InWaTec Combined stands at the forefront of this vital service with our Hydrostatic Bailer running services, offering a sophisticated solution to the age-old challenge of collecting solids and cleaning the wellbore. The Necessity of Hydrostatic Bailer Operations Hydrostatic Bailers are an integral component in the suite of tools required for effective well maintenance. The principle behind these tools is simple yet ingenious—they utilize the pressure differential created by the well fluid to draw debris into the bailer, effectively removing it from the wellbore. This operation is crucial, as it ensures that the wellbore is free from obstructions that could hinder subsequent interventions or impede production. Versatile Solutions for Onshore and Offshore Operations Whether dealing with onshore wells nestled in the heart of a bustling oil field or offshore platforms braving the open seas, InWaTec Combined’s Hydrostatic Bailer services are designed to adapt to any environment. Our tools and techniques are as versatile as they are effective, ensuring that no matter the location, the cleanliness and functionality of the wellbore can be maintained to the highest standards. Technology-Driven Efficiency InWaTec Combined’s commitment to technological innovation is embodied in our Hydrostatic Bailer services. By employing the latest advancements in well servicing technology, we provide a more efficient and reliable means of wellbore cleaning. This not only optimizes the bailing process but also translates into significant time and cost savings for our clients. Prioritizing Safety and Environmental Stewardship Safety and environmental protection are paramount in all of InWaTec Combined’s operations. Our Hydrostatic Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of responsible operations, especially in sensitive onshore and offshore locations. Your Partner in Operational Excellence Choosing InWaTec Combined for your Hydrostatic Bailer needs means partnering with a company that is dedicated to excellence. Our Hydrostatic Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Clarity in Every Operation In conclusion, InWaTec Combined’s Hydrostatic Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, efficiency, safety, and environmental responsibility, we ensure that your wellbore cleaning operations are performed to the highest standards. Trust InWaTec Combined to deliver clear solutions for your wellbore challenges, ensuring the uninterrupted success and productivity of your operations.
Service
In Stock
Service
New
API
Land Freight
Operator
Reliable Utility Backup Operators: Trust Lovat Gas Solutions When it comes to utility backup operations, Lovat Gas Solutions stands out as your trusted partner. With over 80 years of combined experience in the industry, our team possesses extensive knowledge and expertise in assisting gas utilities with pipeline outages and redesigning town border stations. We are here to provide you with highly skilled utility backup operators backed by engineers and operations support to meet your short or long-term operational needs. At Lovat Gas Solutions, we understand the criticality of having a reliable and efficient backup operation in place. Our team of utility backup operators is well-trained and equipped with the necessary expertise to seamlessly support your utility or gas operation during emergencies or planned downtime. We ensure that our operators are up to date with all safety training, enabling them to come and provide immediate assistance to your operations when required. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With our extensive experience across Canada, from north to south and east to west, we have a deep understanding of the unique challenges and requirements of utility backup operations. Our team draws upon their years of experience to deliver reliable and effective solutions tailored to your specific needs. 2. Comprehensive Support: Our utility backup operators are backed by a team of engineers and operations support, ensuring a well-rounded approach to addressing your operational manpower needs. We provide a holistic support system that covers all aspects of utility backup operations, from planning to execution. 3. Safety as a Priority: Safety is of utmost importance to us. We prioritize the well-being of our operators and your operational environment. Our utility backup operators undergo rigorous safety training to ensure compliance with industry standards and best practices. 4. Responsive Service: We understand that utility backup operations require quick response and reliable support. Our team is ready to assist you on short notice, ensuring minimal disruption to your operations during emergencies or planned outages. When you choose Lovat Gas Solutions for your utility backup operator needs, you can rest assured that you are partnering with a reliable and experienced company. We are dedicated to providing the highest level of service and support to meet your temporary operational manpower requirements. Contact a Lovat Gas Solutions expert today and let us help you with your utility backup operator needs. With our reliable team, comprehensive support, and commitment to safety, we will ensure a seamless and efficient utility backup operation for your gas utility or operation. Trust Lovat Gas Solutions to be your trusted partner in utility backup operations.
Service
In Stock
Service
Used
API
Land Freight
Downhole Tools
Maximizing Downhole Efficiency with HOCA Oil Tools' Plug with Valve Sub-Assembly In the challenging and intricate world of downhole oil and gas operations, having reliable, high-quality tools is essential to ensure efficiency, safety, and the success of interventions. HOCA Oil Tools stands at the forefront of this industry with its innovative Plug with Valve Sub-Assembly, designed to cater to the critical demands of downhole environments. Our products are crafted to provide unparalleled performance, ensuring your operations run smoothly and effectively. HOCA’s Plug with Valve Sub-Assembly: Precision Engineered for Downhole Success Our Plug with Valve Sub-Assembly is specifically designed for robust and reliable downhole application, offering a versatile solution for various operational needs. These plugs are essential for tasks such as pressure isolation, testing, and fluid control within the wellbore. Made with precision and from high-grade materials, they are built to withstand the harsh downhole environment, ensuring durability and operational integrity. Experience the HOCA Oil Tools Advantage By integrating HOCA Oil Tools’ Plug with Valve Sub-Assembly into your downhole operations, you are choosing a solution that emphasizes quality, performance, and customer satisfaction. Our commitment to innovation and excellence ensures that our products meet the complex demands of the oil and gas industry, providing you with tools that not only meet but exceed your operational requirements. Our Plug with Valve Sub-Assembly represents the pinnacle of downhole tool design, offering a blend of reliability, efficiency, and performance. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with advanced solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and leverage the power of our Plug with Valve Sub-Assembly to enhance your operational success. Partner with us and embrace the future of downhole operations with tools that set new industry standards for quality and performance. With HOCA Oil Tools, elevate your downhole operations to new levels of efficiency and reliability, ensuring your success in the competitive oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Chemical Pump
Our chemical injection units can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these chemical injection units are highly reliable and easy to operate. Clients use our chemical injection units for corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, nitrate injection, and more. These skids are rated for offshore and desert conditions and can be customized for specific operating areas.
Buy
In Stock
Manufacturer
New
ISO
Air Freight
Streamline Your Mailing Process with Postage Machine Leasing from CWB National Leasing Enhancing Your Business Communication with Efficient and Cost-Effective Solutions For businesses of all sizes, managing mailing and postage efficiently is key to effective communication and operational success. Leasing postage machines through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and smart solution for businesses seeking to streamline their mailing process. Here’s how leasing postage machines can benefit your business: 1. Quick Access to Advanced Mailing Technology Recognizing the importance of efficient mailing operations, CWB National Leasing offers a rapid leasing process. Decisions are typically made within 48 hours of your application, ensuring that your postage machines can be delivered and operational quickly. This swift service enhances your mailing capabilities and reduces manual effort. 2. Increased Financial Flexibility Leasing postage machines with CWB National Leasing enhances your buying power. It allows you to spread costs over manageable periodic payments instead of a significant upfront purchase, freeing up capital for other essential business operations. The option to add extra features or accessories to your postage machines for a small payment increase enables customization to meet specific mailing needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your postage machines start contributing to your business’s efficiency while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing postage machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Choosing to lease postage machines through CWB National Leasing is a strategic decision that equips your business with essential mailing tools while maintaining financial flexibility. It ensures access to the latest postage technology, vital for efficient and cost-effective mail handling, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, streamlined communication, and increased productivity, helping your business thrive in today’s competitive environment.
Service
In Stock
Service
New
ISO
Cybersecurity
Unlock Excellence with ALCiT: Proud Partners with IBM In the realm of technology, partnerships are the cornerstone of innovation. ALCiT stands shoulder to shoulder with industry giant IBM, bringing you a new era of unparalleled software solutions. Welcome to a world where success is defined by the best-in-class, where security knows no rivalries. Unleashing the Power of IBM's Software Portfolio IBM's software portfolio isn't just a collection – it's a testament to innovation and excellence. From the breadth of their offerings to the depth of their security solutions, IBM stands as a market leader, rewriting the rules of what's possible. Your Vision, Our Expertise At ALCiT, we're not just taking IBM's products; we're transforming them into tools that empower your business. It's not just about technology; it's about making technology work for you. Our mission is clear: we harness the power of IBM's advanced products and mold them into solutions that drive your success. Effortless Advancement via 'As a Service' We understand that innovation shouldn't be a burden. In fact, it should be seamless. That's why most of our solutions are offered through an 'as a Service' model. You reap the benefits without the complexities, allowing your team to focus on what truly matters – your core business. Elevating Your Business with IBM's Solutions Let us paint a picture of what IBM's products can achieve for your business: Enhanced Security: Security isn't just a feature; it's a necessity. IBM's security solutions stand unrivaled, ensuring your digital fortress is impenetrable against evolving threats. Efficiency Amplified: IBM's solutions streamline operations, boosting efficiency and productivity. With ALCiT as your partner, you'll experience newfound operational excellence. Innovation Unleashed: From cutting-edge analytics to cloud solutions, IBM's offerings redefine innovation. We take these solutions and tailor them to your unique needs, ensuring they align with your vision. Secure Today, Elevate Tomorrow ALCiT and IBM are more than just names; we're your pathway to success. Experience the best-in-class, redefine security, and elevate your business to new heights. Discover the power of ALCiT's partnership with IBM.
Service
Made to Order
Service
New
ISO
EnviroBlu Cleaner and Degreaser
Welcome to the ultimate solution for maintaining cleanliness in the most demanding industrial environments. Our 20-liter EnviroBlu cleaner is specially formulated to tackle tough dirt and grime efficiently, ensuring your workspaces are pristine while upholding the highest safety and environmental standards. Ideal for Harsh Conditions When you are dealing with stubborn industrial dirt, the 20-liter EnvirioBlu cleaner simplifies your cleaning processes. It's powerful yet safe and eco-friendly, perfect for industries that value efficiency and environmental responsibility. This large volume packaging is designed for cost-effective, long-term use, reducing the frequency of purchases and ensuring you get more cleaning done with less. See the difference for yourself and experience a cleaner, safer, and more efficient workplace. Please contact us for more information.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Miner's Cap Lamp Charging Station
Optimize Your Charging Process with the CSA 12 Unit Non-Locking FAST Charger Rack from Provix Provix is pleased to offer the CSA 12 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-12BC), a streamlined and efficient charging solution ideal for modern mining, construction, and industrial environments. This charger rack is designed to rapidly charge up to 12 units, making it perfect for smaller teams or spaces. Rapid Charging for Minimal Downtime The CSA 12 Unit FAST Charger Rack is engineered for speed and efficiency, charging WISE LITE2 units in just 4 hours and LAMP3A/4A models in 5 hours. This quick charging capability is crucial for operations where equipment needs to be ready and operational with minimal delay, ensuring continuous productivity. Compact and Space-Saving Design With its non-locking, single-sided design, the CSA charger rack is an ideal solution for operations with limited space. Its compact footprint allows for convenient placement in equipment rooms, workshops, or mobile units, maximizing the utility of available space without sacrificing charging capacity. Versatile and User-Friendly The CSA 12 Unit Charger Rack is not just efficient and space-saving; it’s also incredibly user-friendly. Its straightforward design allows for easy access to all charging ports, facilitating the efficient management of multiple devices. This accessibility is especially beneficial in fast-paced work environments where time is of the essence. Durable and Reliable Construction Constructed to withstand the tough conditions typical in mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures long-term performance, representing a sound investment for operations focused on efficiency and reliability. Ideal for Various Operational Sizes Whether you are part of a smaller mining crew, a construction team, or managing a rental fleet, the CSA 12 Unit Non-Locking FAST Charger Rack is an excellent choice. It allows for effective management of multiple devices, making it versatile for different operational needs. Get Your Charger Rack Today Upgrade your equipment charging station with the Wisdom CSA 12 Unit Non-Locking FAST Charger Rack from Provix. Visit www.provix.net now to learn more about this efficient, space-saving charging solution and take a step towards optimizing your operation’s productivity.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Ambient Valve
Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Welding Accessory
Introducing Canaweld's Electrode Holder EH 401 - Power, Precision, and Durability in Your Hands! When it comes to welding, having the right tools in your hands can make all the difference. That's why Canaweld is proud to present the EH 401 Electrode Holder - a Canadian-designed, heavy-duty, and versatile tool that will elevate your welding experience to new heights. Designed to Perfection - Light Yet Heavy Duty: At Canaweld, we understand the importance of balance in welding equipment. The EH 401 Electrode Holder combines the best of both worlds - it is exceptionally light in weight for easy handling, yet built with the sturdiness and durability of premium copper and brass alloys. Weld with confidence, knowing that our Electrode Holder is engineered to withstand the toughest welding conditions. Meeting International Standards - Quality You Can Trust: Your safety is our top priority. That's why the EH 401 Electrode Holder has undergone rigorous testing according to international standards, including IEC 60974-11. It has passed all electrical, impact, insulation, and heating tests with flying colors, ensuring that you get a reliable and safe tool every time. Unleash the Power - 400 Amps at 35% Duty Cycle: When you need the power to handle heavy welding tasks, the EH 401 delivers. With a robust 400 Amps at 35% Duty Cycle in 104°F/40°C, this Electrode Holder is ready to tackle any challenge you throw its way. Whether you're working on pipelines, structural welding, or any oil and gas project, the EH 401 is your reliable companion. Built for Convenience - Easy Cable Connection and More: Welding should be seamless, and that's why we've designed the EH 401 with ease of use in mind. Its special design allows for quick and simple cable connection, making setup a breeze with the included free spanner. A copper bush ensures a secure and damage-free connection to the welding cable, enhancing electricity conductivity and extending the life of the connection. Flexible and Adaptable - Your Welding Ally: The EH 401 Electrode Holder offers a 6-position jaw pattern, allowing you to use it in 45, 90, or 180-degree positions. Versatility is key, and this holder provides the flexibility you need to achieve precise welding results, no matter the angle or position. Get Your Canaweld EH 401 Electrode Holder Today: With Canaweld's EH 401 Electrode Holder in your hands, welding becomes an art. Unlock the power, precision, and durability that our Canadian-designed holder brings to the table. Whether you're a seasoned professional or just starting on your welding journey, the EH 401 will be your trusted welding ally. Experience the Canaweld difference - Choose the EH 401 Electrode Holder and take your welding to the next level!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
FX Business Services
Simplify Your International Business Finances with Dunbridge Financial: Unlocking the Advantage of Paying Invoices in Local Currency In the ever-expanding global market, businesses face the challenge of managing international transactions efficiently. At Dunbridge Financial, we understand the complexities involved in paying suppliers and the need for better pricing and foreign exchange advantage. Our Business Services are tailor-made to empower your business with seamless international payment solutions, helping you take your enterprise to new heights. Pay Invoices with the Foreign Exchange Advantage Paying invoices in local currency brings with it a host of benefits, including foreign exchange advantages and better pricing. With Dunbridge Financial, you gain access to a platform that simplifies your international business payments, allowing you to optimize your transactions and save on unnecessary costs. All Business Services Under One Roof At Dunbridge Financial, we believe in providing comprehensive solutions for your international business needs. Here's what we offer: 1. Open Your Free Global Business Account Within 24hrs Time is of the essence in the business world, and we value yours. With Dunbridge Financial, you can open your free global business account in just 24 hours, enabling you to jumpstart your international financial journey swiftly. 2. Concierge Customer Service We pride ourselves on embedding with our customers and understanding their unique needs. Each of our customers is assigned a dedicated account manager who collaborates closely with you to develop a customized payment strategy that aligns perfectly with your business objectives. Take the complexity out of your FX payment strategy and experience the utmost support and guidance. 3. Fast and Secure International Payments Speed and security are paramount when it comes to international payments. Our global banking relationships enable you to make cost-effective and secure transactions to over 100 currencies and 120 countries. We use a market-leading platform through our payment service partners, which is compliant with ISO27001, ensuring that your funds and data are in safe hands. 4. Multi-Currency Accounts, in Your Company's Name Managing multiple currency balances can be challenging, but not with Dunbridge Financial. Enjoy the convenience of real accounts in your company name, allowing you to receive like a local with IBAN, ACH, SEPA capabilities. Seamlessly transfer your funds between currencies as and when needed. 5. Mass Payments Simplify your accounts payable processes with Dunbridge Financial's mass payments feature. Upload, manage, and pay up to 1000 payees at a time, streamlining your financial operations and saving valuable time and effort. Join Us Today and Streamline Your International Business Finances Don't let complexities and uncertainties hinder your business growth. Join Dunbridge Financial today and experience the power of seamless international payments. Unlock the foreign exchange advantage, optimize your invoicing processes, and take your business to new heights on the global stage. Empower your international business with Dunbridge Financial. Sign up now and unlock a world of efficiency, security, and success. Simplify your international transactions and focus on what truly matters - the growth of your business.
Service
Made to Order
Service
New
ISO
Air Freight
WI Safety Valve
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Personal FInancial Service
Unlock Financial Freedom with Dunbridge Financial's Personal Services Are you seeking a financial service that puts your needs first and offers complete transparency, security, and convenience? Look no further than Dunbridge Financial's Personal Services. With a focus on empowering you to make the most of your money, we offer a range of features that are designed to simplify your financial life. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in honesty and integrity. That's why we promise no hidden fees – what you see is what you get. Access our live exchange rates, ensuring you are always aware of the current rates and getting the best value for your money. With us, you can rest assured that there are no unpleasant surprises when it comes to your transactions. Security is Our Priority We understand that the security of your funds and data is of utmost importance. With Dunbridge Financial, you can trust that your assets are in safe hands. Our payment service partners are compliant with ISO27001, the internationally recognized standard for information security management systems. This means your client funds are managed with the highest level of safety and security, providing you with peace of mind throughout your financial journey. Easy to Use, Easy to Save Sending money to over 100 countries has never been easier. With Dunbridge Financial, you can quickly and effortlessly transfer funds to your desired destinations. Simply choose where and who you want to send money to, lock in your rate, and you're done – it's that simple! Our user-friendly platform ensures that managing your finances is a seamless experience, leaving you with more time to focus on what truly matters to you. Explore Our Foreign Investment Management Services At Dunbridge Financial, we go above and beyond to cater to your diverse financial needs. That's why we offer a comprehensive suite of Foreign Investment Management services. Whether you're managing investments in your home country while living abroad, exploring offshore investment opportunities, or paying your mortgage in a different country for that dream vacation villa or investment property – we have you covered. Additionally, our flexible currency options allow you to have your pay and expenses paid in your choice of currency, making it convenient and cost-effective for you to manage your finances internationally. Experience Financial Freedom Today With Dunbridge Financial's Personal Services, you can experience true financial freedom. Say goodbye to hidden fees and complicated processes – we keep things simple, secure, and transparent, so you can make the most out of your money without any worries. Join us today and discover a world of financial empowerment. Let us be your trusted partner on your financial journey, guiding you every step of the way towards a brighter and more prosperous future. Dunbridge Financial: Your Path to Financial Freedom Starts Here.
Service
Made to Order
Service
New
ISO
Air Freight
Software Development
Revolutionize Your Facility Management with ELEKS: Powering Automated Visual Asset Inspection Are you ready to redefine the way you manage your industrial facilities? Look no further than ELEKS, your trusted partner in cutting-edge energy software development services. We're here to introduce you to the future of facility management – a future where automation, precision, and efficiency reign supreme. Automate Visual Asset Inspection for Unmatched Efficiency Imagine a world where you can inspect your industrial assets without the hassle of arranging human access or investing countless hours. ELEKS is at the forefront of this transformation with our groundbreaking automation solutions. We specialize in enabling fast, reliable, and repeatable inspection automation through the ingenious combination of drones and location-based services. Harness the Power of Computer Vision Technology Our services empower you with a customizable technology solution that leverages the remarkable capabilities of computer vision. Say goodbye to the days of manual inspections and hello to a new era of data-driven decision-making. With ELEKS, you'll gain the ability to swiftly assess the condition of your infrastructure, all without requiring human intervention. Real-Time Data, Real-Time Insights Time is of the essence in the industrial world, and that's where ELEKS truly shines. Our software development prowess enables you to collect real-time data on the state of your facilities. No more waiting for weeks to understand the health of your assets. With our solutions, you'll be equipped with immediate insights, allowing you to take proactive measures swiftly. Identify Asset Conditions with Precision Our technology enables you to quickly and accurately identify asset conditions. Whether you're overseeing sprawling manufacturing plants or extensive energy installations, ELEKS ensures that you're always in the loop about your assets' health. This level of precision empowers you to make informed decisions and allocate resources more effectively. Predict Defects Using Machine Learning But we don't stop at just assessing current conditions. ELEKS goes a step further by integrating machine learning capabilities into our solutions. By analyzing historical data and patterns, our technology enables you to predict defects before they even manifest physically. This proactive approach to facility management saves you time, money, and operational disruptions. Join the ELEKS Revolution The future of industrial facility management is here, and ELEKS is your gateway to this future. Partner with us and unlock a world of possibilities, where automation streamlines your operations, computer vision unveils hidden insights, and machine learning propels you ahead of the competition. Contact Us Today Ready to embark on a journey of enhanced efficiency and data-driven insights? Get in touch with our experts today, and let's transform the way you manage your industrial facilities together. ELEKS – Empowering Innovation, Enabling Progress.
Service
Made to Order
Service
New
ISO
Downhole Tools
Secure and Optimize Your Downhole Operations with HOCA Oil Tools' Check Set Tool In the intricate world of oil and gas exploration and extraction, securing and optimizing downhole components are pivotal for operational success and safety. HOCA Oil Tools, a leader in downhole slick line tool solutions, presents the Check Set Tool, an innovative product designed to ensure the correct setting and functionality of downhole locks and plugs. This specialized tool is an essential part of maintaining well integrity and efficiency, demonstrating our commitment to providing high-quality, reliable downhole solutions. HOCA’s Check Set Tool: Ensuring Downhole Safety and Efficiency The Check Set Tool by HOCA Oil Tools is engineered with precision, built to verify the accurate setting of lock mandrels and other downhole locking devices. Crafted from robust materials suited for the harsh downhole environment, this tool is designed for reliability and durability, ensuring that your downhole operations run smoothly and securely. Elevate Your Downhole Tool Setting with HOCA Oil Tools At HOCA Oil Tools, we understand the challenges and risks associated with downhole operations. Our Check Set Tool is a reflection of our dedication to innovation, quality, and customer service, offering a solution that addresses the critical need for secure and efficient downhole tool settings. Integrating the HOCA Check Set Tool into your downhole operations not only enhances operational security and efficiency but also demonstrates a commitment to the highest standards of well integrity and safety. Our experienced team is dedicated to supporting your operational success, providing tools and solutions that meet the demanding conditions of the oil and gas industry. Invest in the HOCA Check Set Tool and experience the confidence and efficiency that come with knowing your downhole components are correctly set and secured. Choose HOCA Oil Tools for all your downhole needs and join the ranks of satisfied customers who trust our products to keep their operations running smoothly and safely.
Buy
In Stock
Product & Service
New
API
Air Freight
Software Development
ELEKS: Revolutionizing Energy Sector Through Big Data and AI Expertise The energy sector is undergoing a seismic shift, and at ELEKS, we're proud to be at the forefront of this transformation. Our unrivaled expertise in Big Data and artificial intelligence (AI) opens new avenues of efficiency and innovation for your organization. With a deep commitment to reshaping the energy landscape, we present you with a list of ten compelling benefits that our services can offer: 1. Data-Driven Decision-Making: Harness the power of data-driven insights. ELEKS' data modelling expertise and AI solutions empower you to make informed decisions that steer your organization towards success. 2. Streamlined Data Analytics: From diagnostic to predictive, our services streamline the entire spectrum of data analytics, providing clarity and actionable insights to support your strategic planning. 3. Swift Load-Flow Calculation: Embrace lightning-fast load-flow calculations powered by AI. Experience a significant reduction in calculation times, enabling quicker responses and better resource allocation. 4. Efficient Asset Management: Manage your energy assets with precision. Our AI-driven tools offer accurate asset insights that facilitate optimal utilization, maintenance planning, and resource allocation. 5. Risk Management Enhancement: Anticipate risks and mitigate them effectively. ELEKS' AI-based solutions help identify potential risks, enabling you to proactively address challenges and ensure continuity. 6. Innovation at Scale: ELEKS doesn't just adapt to change; we pioneer it. Our innovative approach ensures you stay ahead in an evolving energy landscape. 7. Personalized Solutions: Tailored to your organization's unique needs, our AI-powered offerings provide custom solutions that align seamlessly with your goals. 8. Technical Excellence: Expect precision and accuracy in every solution we deliver. Our team of experts ensures that you receive results of the highest technical caliber. 9. Collaborative Partnership: Partner with ELEKS to unlock your energy sector's potential. We collaborate closely with you, combining your industry knowledge with our technical prowess. 10. Future-Ready Resilience: With ELEKS, you're prepared for the future. Our AI solutions equip your organization to adapt, thrive, and excel as the energy sector evolves. At ELEKS, we're not just offering services; we're forging a path towards a more efficient, innovative, and sustainable energy sector. Join us in this journey of transformation as we leverage Big Data and AI to reshape the energy landscape. Trust ELEKS to empower your organization to make informed decisions, optimize operations, and drive success in the dynamic energy sector of tomorrow.
Service
Made to Order
Service
New
ISO
Ambient 5 inch SSSV
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Air Freight
MJS Packer
The MJS™ packer is a compact, high-performance, thermal packer system which offers an expansion joint and a casing packer in a single assembly. The MJS is a rotationally set, double-grip packer, speciically designed for use in steam injection, huff and puff or geothermal production wells, when a wide range of pressures from above or below are anticipated. Please note: Tubing weight and grade must be capable of applying minimum speciied setting torque to the packer. We can source from current stock or direct from the manufacturer.
Buy
Made to Order
Product
New
API
Sea Freight
AV Annulus Safety Valve
The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature
Buy
Made to Order
Product
New
API
Sea Freight
WI Valve 5.71
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
K Storm Choke 2 1/2 inch
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Manufacturer
New
API
Land Freight
WI Valve
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Navigating Through the Digital Veins of the Oil and Gas Industry: Introducing DeltaV Backbone Infrastructure by Nulux Network Solutions In the ever-evolving arena of the oil and gas industry, where massive volumes of data traverse through the intricate digital veins of complex operational networks, the prowess of a robust, secure, and efficient backbone infrastructure stands undisputed. At Nulux Network Solutions, we comprehend the pulse of this digital heartbeat, presenting a bespoke service for engineering professionals in the sector: The DeltaV Backbone Infrastructure. A Symphony of Sustainable Solutions: Lighting the Path with Fiber Optics In an era where sustainability intertwines with technological advancements, Nulux unfurls a spectrum of products, solutions, and services across the comprehensive energy value chain. Endeavoring to illuminate your journey toward a sustainable future, our Fiber Optic solutions embody the quintessence of high-speed, reliable, and secure data transmission across your operational ecosystems, ensuring that your digital operations move with an unparalleled rhythm of coherence and efficiency. The DeltaV Backbone Infrastructure: Navigating through the Digital Nexus Our DeltaV Backbone Infrastructure is not merely a service but an orchestrated amalgamation of technology, expertise, and reliability, ensuring your operations in the oil and gas sectors are streamlined, secure, and synergistically attuned to the digital transformations permeating the industry. Robust Data Transmission: Ensuring that your operational data, ranging from real-time analytics to predictive maintenance insights, traverse securely and efficiently across the digital pathways. Enhanced Reliability: With a fiber-optic backbone, experience a network with minimal downtime and robust resistance against physical wear and tear, providing a perennial flow of vital operational data. Scalable Solutions: As your operations expand, so does our DeltaV Backbone Infrastructure, ensuring that your growing data demands are met with equal vigor and capacity. Intricate Weaving of Data and Operations The DeltaV Backbone Infrastructure meticulously intertwines with your operational nodes, ensuring that the massive data generated at every point is seamlessly integrated, analyzed, and utilized, providing a foundation upon which strategic decisions can be formulated and executed with precision. Safeguarding your Digital Pathways Ensuring that your data pathways are not just operationally optimized but also securely fortified, the DeltaV Backbone Infrastructure is built upon stringent security protocols, ensuring a secure digital environment wherein your data is shielded against potential cyber vulnerabilities. Embark on a Journey with Nulux Traverse through the digital corridors of the oil and gas industry with Nulux Network Solutions, where your data is not merely transmitted but is secured, analyzed, and utilized to sculpt a future where your operations resonate with sustainability, efficiency, and innovative prowess. With the DeltaV Backbone Infrastructure, you navigate through a digital nexus, where every byte of data, every decision and every operational stride is backed by the robust reliability, unparalleled speed, and secure pathways of our state-of-the-art fiber-optic solutions. Ensuring a Future where Data Drives Decision In an operational universe where data is the catalyst for decisions, ensuring its secure, reliable, and efficient transmission becomes paramount. Navigate with Nulux, where your data doesn’t just traverse; it drives your operations towards a future where every decision is data-driven, every operation is efficient, and where your journey towards sustainability is always illuminated by the reliable glow of our solutions. Your journey through the digital and operational landscapes of the oil and gas industry begins with Nulux – where your data finds its true pathway, and where your operations find their true rhythm. Let's sculpt a future, together, navigating through the digital veins of innovation, sustainability, and operational excellence.
Service
In Stock
Service
New
ISO
Mobile Gas Equipment
Custom Designed Gas Solutions: Your Partner in Customized Excellence with Lovat Gas Solutions At Lovat Gas Solutions, our approach is simple yet effective: we develop custom gas solutions that are specifically designed to meet the unique requirements of your application. As a service-oriented company, we are dedicated to delivering solutions that work seamlessly for your business. It is this commitment to excellence that sets us apart and earns us the loyalty of our valued customers. Why choose Lovat Gas Solutions for your custom gas needs? 1. Tailor-Made Solutions: We understand that your business has distinct requirements and challenges. That's why we take a personalized approach to develop solutions that are specifically tailored to your application. Whether you need a gas supply solution, operational support, or a comprehensive project plan, we design and deliver the solution that perfectly fits your needs. 2. Customer-Centric Focus: Your satisfaction is our top priority. We value your partnership and strive to build long-lasting relationships based on trust and exceptional service. Our team of experts takes the time to listen to your needs, understand your goals, and work collaboratively to deliver the optimal solution for your business. 3. Service-Oriented Approach: Lovat Gas Solutions is committed to providing the highest level of service to our customers. From the initial consultation to ongoing support, we prioritize responsiveness, reliability, and open communication. Our dedicated team is always ready to address your questions, concerns, and evolving needs. 4. Proven Track Record: Our customers love working with us because we consistently deliver results. With a wealth of industry experience, our team has a proven track record of success in developing and implementing effective gas solutions across various sectors. We are confident that we can exceed your expectations and provide you with a solution that works seamlessly for your application. Choose Lovat Gas Solutions as your partner for custom gas solutions. Experience the difference of working with a company that is dedicated to developing tailored solutions that deliver optimal results for your business. Contact us today to discuss your specific needs, and let our experienced team design a custom gas solution that works for you. Together, we will achieve excellence and drive your success with Lovat Gas Solutions.
Service
Made to Order
Service
New
ISO
Land Freight
Cybersecurity
Elevate Your Communications with ALCiT's Jabra Partnership Seamless communication isn't just a convenience – it's a necessity. ALCiT proudly joins forces with Jabra to bring you cutting-edge Video Conference & Phone System Solutions. From transforming meetings to redefining collaboration, our partnership empowers your business to connect like never before. The Perfect Fit for Every Workspace In a world where every workspace is unique, the right device can make all the difference. ALCiT and Jabra collaborate to ensure you have the perfect tool for every scenario. Whether you're at your desk, on your phone, or collaborating with a team, our offerings cater to your diverse needs. Simplicity Redefined: Easy Set Up for Productivity We understand that time is of the essence, and productivity waits for no one. That's why ALCiT's Jabra solutions offer plug-and-play simplicity. Set up becomes a breeze, allowing you to dive into productive meetings with minimal hassle. Embrace a world where connectivity is instant and efficiency is paramount. Exuding Professionalism, Enhancing Performance The heart of professionalism lies in how you present yourself – or in this case, how you sound. ALCiT's Jabra partnership equips you with professional-grade equipment, delivering superior audio quality that elevates your company's image. With pristine sound, your meetings not only run smoothly but exude the highest level of professionalism. Why Choose ALCiT's Jabra Solutions? Tailored for You: No two workspaces are alike, and we ensure you have the right device for your unique needs, ensuring optimal performance. Seamless Set Up: Plug-and-play simplicity ensures that setup is a breeze for everyone, saving you valuable time and minimizing technical obstacles. Professional Impression: Superior audio quality exudes professionalism, enhancing your company's reputation while ensuring productive, smooth-running meetings. Elevate Your Communications Today ALCiT and Jabra redefine how you connect, collaborate, and communicate. Embrace a future where every conversation is crystal clear, every collaboration is seamless, and every meeting is productive. Experience the power of ALCiT's partnership with Jabra.
Service
Made to Order
Service
New
ISO
Water Injection Valve 2.62
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Sea Freight
SBP Solvable Bridge Plug
Introducing the SBP Solvable Bridge Plug from Marlin Oil Tools: A Revolutionary Approach to Temporary Well Barrier Solutions Marlin Oil Tools is proud to unveil the SBP Solvable Bridge Plug, an innovative downhole tool designed for the efficient and environmentally friendly isolation of oil and gas wells. Engineered with state-of-the-art materials that fully dissolve in downhole conditions, the SBP offers a temporary barrier solution that simplifies well intervention processes and enhances operational efficiency. Key Features of the SBP Solvable Bridge Plug: Eco-Friendly Dissolution: Designed to completely dissolve over time, the SBP eliminates the need for mechanical removal, reducing environmental impact and operational costs. Efficient Well Isolation: The plug is set using a hydraulic Setting Tool (STT), ensuring a quick and secure installation to create a reliable temporary barrier and isolate underlying intervals. Fully Soluble Materials: Constructed from entirely soluble materials for both collets and the sealing element, ensuring that the plug will fully disintegrate without leaving residue. Field-Proven Reliability: The effectiveness and reliability of the SBP Solvable Bridge Plug have been rigorously tested and confirmed through extensive field work, offering peace of mind in its performance. Optimized for Oil and Gas Wells: Specifically tailored for use in oil and gas wells, the SBP is an ideal solution for operators seeking to enhance well management and operational flexibility. Streamlined Operations: By dissolving directly in the well, the SBP streamlines the workflow, eliminating the need for follow-up interventions for plug removal. Maximize your operational efficiency and environmental stewardship with the SBP Solvable Bridge Plug from Marlin Oil Tools, a leading-edge solution engineered for temporary well isolation in the oil and gas industry. Utilizing fully soluble materials that dissolve in downhole conditions, the SBP offers a reliable, cost-effective, and eco-friendly alternative to traditional bridge plugs. Set with a hydraulic Setting Tool (STT), this plug is designed to create an effective barrier and then dissolve, simplifying well interventions and eliminating the need for mechanical removal. Choose the SBP Solvable Bridge Plug for its field-proven reliability, operational efficiency, and commitment to environmental sustainability. Why Choose the SBP Solvable Bridge Plug from Marlin Oil Tools? Sustainable Well Management: Provides an environmentally friendly solution that reduces the ecological footprint of well operations. Cost-Effective Operations: Eliminates the expense and time associated with traditional plug removal, enhancing operational efficiency. Reliable Temporary Isolation: Ensures secure and effective temporary well isolation, supporting a wide range of intervention tasks. Proven in Field Applications: Backed by rigorous field testing, the SBP offers reliability and peace of mind for operators. The SBP Solvable Bridge Plug by Marlin Oil Tools represents the cutting edge in downhole tool technology, providing oil and gas operators with a smart, sustainable, and efficient solution for well isolation. Incorporate the SBP into your operations to benefit from its innovative design, operational excellence, and environmental benefits.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Dive into the Depths: Enhance Your ROV Skills with Poseidon Robotics' ROV Field Training As the underwater frontier beckons with mysteries and challenges, subsea robotics is at the forefront of exploring and unraveling its secrets. At Poseidon Robotics, we believe that knowledge and skill are the cornerstones of successful ROV (Remotely Operated Vehicle) operations. That's why we are proud to present our comprehensive ROV Field Training program, designed to equip you with the expertise to navigate the depths with confidence. Unparalleled Hands-On Experience Our ROV Field Training is a unique opportunity to gain hands-on experience in operating and maneuvering advanced underwater robotics. Under the guidance of our seasoned instructors, you will immerse yourself in the world of subsea exploration, learning practical skills that will empower you to conduct successful missions and overcome real-world challenges. Tailored for All Skill Levels Whether you're a seasoned ROV pilot or just embarking on your subsea robotics journey, our training program caters to all skill levels. Beginners will receive comprehensive instruction on ROV basics, including vehicle setup, navigation, and troubleshooting. Experienced operators will have the chance to refine their skills, learn advanced techniques, and master specialized maneuvers. Customized Training for Your Needs At Poseidon Robotics, we understand that each organization and project is unique. That's why we offer customized training programs tailored to your specific needs. Our team will work closely with you to identify your goals and objectives, ensuring that the training aligns with your requirements. Whether you're in the oil and gas industry, marine research, or environmental conservation, our training program will be adapted to suit your field. In-Depth Learning Modules Our ROV Field Training covers a wide range of critical topics, including: 1. ROV Operation Fundamentals: Understanding the vehicle components, controllers, and communication systems. 2. Navigation and Maneuvering: Mastering piloting techniques, maintaining stability, and performing complex maneuvers. 3. Mission Planning and Execution: Developing effective mission plans and strategies for successful outcomes. 4. Troubleshooting and Maintenance: Learning to identify and address common technical issues to ensure seamless operations. 5. Safety and Risk Management: Understanding safety protocols, emergency procedures, and risk assessment. Empowering Your Team for Success By participating in Poseidon Robotics' ROV Field Training, you are investing in the success of your team and your subsea operations. Our mission is to empower professionals like you with the knowledge and skills needed to unlock the full potential of underwater exploration and achieve remarkable results. Join Poseidon Robotics' ROV Field Training Today Don't miss this opportunity to take your ROV expertise to new heights. Reach out to us today to learn more about our training program and how it can elevate your subsea capabilities. Dive into the depths with confidence, precision, and efficiency, guided by Poseidon Robotics' unwavering commitment to excellence in subsea robotics training.
Service
Made to Order
Service
New
ASME
Air Freight
A-3 Retrievable Packer
The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer.
Buy
In Stock
Product
New
API
Sea Freight
Baker R-3 Retrievable Packer
The R-3™ packer is a versatile production packer intended for a broad range of production applications. It is a compression-set packer, suitable for stimulation and treating applications in a double-grip configuration. Applications in which excessive bottomhole pressures have been depleted, a single-grip version can be used as an economical production packer. The R-3 single-grip retrievable-casing packer is set with one-fourth-turn right-hand rotation and can be released with straight pickup. We can source from current stock or direct from the manufacturer.
Buy
In Stock
New
New
API
Sea Freight
5-1/2 K storm choke
Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.
Buy
Made to Order
Product
New
API
Sea Freight
Welding Cart for Single Phase Machines
Introducing the Canaweld Welder Cart for Single Phase Machines - Your Ultimate Welding Companion! When it comes to welding, having the right equipment at your fingertips is essential. That's why we've designed the Canaweld Welder Cart - a sturdy and reliable cart that will keep your single-phase machines organized and accessible at all times. With its thoughtful features and robust construction, this cart is the perfect addition to your welding setup. Built for Strength and Durability: The Canaweld Welder Cart is crafted with a strong steel construction that ensures it can handle the demands of the oil and gas industry. Its powder coat finish adds an extra layer of protection, making it resistant to wear and tear from daily use. Rest assured, this cart is built to last. Maximum Convenience, Minimum Effort: Moving your welding equipment has never been easier. The front caster wheels on our cart swivel a full 360 degrees, allowing for smooth and effortless turning. No more struggling to maneuver your machines - our cart does the work for you. Ample Storage Space: Organize your welding essentials with ease. The Canaweld Welder Cart features three-tier shelves thoughtfully designed to accommodate all your portable MIG welders, stick welders, plasma cutters, and necessary accessories. Plus, there's enough room for consumables and a gas cylinder, ensuring you have everything you need at your fingertips. Secure Your Equipment: Your safety is our priority. That's why we've equipped the cart with a chain to secure the gas tank firmly in place. Worried about keeping your cables and helmet tidy? The side hook provides a convenient storage solution for them, eliminating clutter and potential hazards. Unbeatable Dimensions: The Canaweld Welder Cart boasts spacious shelf dimensions that perfectly cater to your welding equipment: • Top Shelf: 18 X 11 X 1 inches • Middle Shelf: 15.5 X 11 X 1 inches • Lower Tray: 27.7 X 11.5 X 2 inches • Gas Bottle Space: 10.2 X 11.4 X 2 inches Ultimate Load Capacity: Our cart can handle the weight. With a load capacity of 110 lbs. (50 kg), you can trust that your valuable equipment is safe and secure while on the move. Efficiency Meets Style: The Canaweld Welder Cart is more than just a functional tool - it's a sleek and stylish addition to your welding setup. Its design not only optimizes your workflow but also adds a touch of professionalism to your workspace. Upgrade Your Welding Experience: Say goodbye to the hassle of transporting your welding equipment and embrace the convenience of the Canaweld Welder Cart. It's time to work smarter, not harder. Elevate your welding experience today with Canaweld - your trusted partner in welding solutions.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Cybersecurity
Fortify Your Datacenter with ALCiT's Qualys Partnership In the realm of datacenter security, the challenge is immense, but the stakes are even higher. ALCiT stands proudly beside Qualys, the trusted sentinel safeguarding 19,000 global businesses across 130 countries. Our partnership with Qualys redefines how you protect, monitor, and enhance your datacenter security, ensuring that vulnerabilities are addressed and threats are thwarted. Qualys: The Shield of Data Security In a world where data is the currency of progress, Qualys reigns as the fortress of protection. Trusted by global businesses and backed by relentless innovation, Qualys has earned its place as the defender of data integrity. ALCiT's partnership with Qualys brings this unrivaled protection to your datacenter. Your Datacenter: Safeguarded, Simplified, Strengthened Comprehensive Inventory: Every asset in your datacenter is meticulously cataloged and kept up-to-date. With Qualys, you gain clarity and control over your infrastructure like never before. Bug Extermination Made Easy: Say goodbye to breaches. Qualys empowers you to effortlessly detect and eliminate bugs that may compromise your datacenter's security. Real-Time Monitoring, Rapid Alerts: The digital landscape evolves, and so should your security. Qualys offers continuous network monitoring, promptly alerting you to any changes that demand attention. Prioritize Threats with Precision: Not all threats are equal. Qualys equips you with the ability to prioritize threats based on their criticality, ensuring that you tackle the most pressing vulnerabilities first. File Validation, Compliance Assured: Compliance isn't a choice; it's a necessity. Centralized file change logging allows you to adhere to compliance standards while maintaining a secure environment. Uncover Stealthy Malware: Malware often lurks in shadows. Qualys' vigilant system flags malware that might evade other defenses, ensuring your datacenter remains a fortress. Unlock Datacenter Security Excellence Today ALCiT's Qualys partnership isn't just a collaboration; it's your key to fortified datacenter security. Experience the power of innovation and protection that safeguards your digital assets and preserves your business's integrity. Experience the power of ALCiT's partnership with Qualys.
Service
Made to Order
Service
New
ISO
Heavy Weight Drill Pipe Cutter
Introducing ID Oiltools' Drill Collar Severing Tools - the reliable and safe solution for Pipe Recovery Operations. Our Drill Collar Severing Tools utilize Explosive Bridge-Wires to simultaneously detonate columns, creating a shock wave collision that severs the tubular with precision. Our tool provides a quick and effective solution to sever heavyweight drill pipe and drill collars, and is designed to conform to API RP-67 for maximum safety. With air shippable detonators and hardware shipped separately, our Drill Collar Severing Tools are the ultimate in convenience and efficiency. Our patented Explosive Bridge-Wire Detonators increase the precision of the colliding shock-waves for maximum performance, making it the tool of choice for stuck pipe or plug and abandonment (P & A) operations. Choose the tool with the largest possible diameter capable of running in the stuck pipe for maximum results. Tension should be applied to the tubing prior to detonation of the Severing Tool to assist in the removal of stuck tubulars. Trust ID Oiltools to provide the safe, efficient, and reliable solution for all your Pipe Recovery Operations.
Buy
In Stock
Product & Service
New
API
Sea Freight
HCR-6000
Introducing HCR-6000, the latest addition to Cleanstream's ‘Environmentally Responsible’ modified acid product line. HCR-6000 is a powerful, low fuming Modified acid that has solubilizing abilities of 15%-25% HCI (concentrate). It's the perfect solution for minimizing the hazardous exposure levels and fuming properties of Hydrochloric acid. HCR-6000 is specifically designed to cater to the needs of the oil and gas industry, where the use of mineral acids is common practice. But unlike traditional hydrochloric acid, HCR-6000 is a clear, low-fuming acid with a low vapor pressure. This means that it poses less of a risk to human health and the environment. One of the standout features of HCR-6000 is its comprehensive spending nature. It is more than two times slower to spend than conventional HCl acid, making it an economical choice for your operations. And if that's not enough, HCR-6000 is also classed as a Class 1 acid package, making it easy to transport and handle. HCR-6000 is also highly customizable. It can be enhanced with conventional oilfield chemistry to cater to the specific needs of your operations. It offers high thermal stability, no precipitation from spent fluids, and iron stabilization effect (nano particles), making it a versatile solution for various applications such as spearhead acid, fracturing/matrix, production, injection wells, and scale treatment. HCR-6000 is also oil compatible, making it an excellent choice for your oil and gas production. Its high spent pH of over 4.5 makes it easy to dispose of, reducing plant interruptions and making it an environmentally responsible choice. At Cleanstream, we are committed to providing our customers with the best possible solutions that are both environmentally responsible and efficient. With HCR-6000, we are taking another step towards a cleaner and safer future for the oil and gas industry. Contact us today to learn more about HCR-6000 and our other ‘Environmentally Responsible’ products.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Plasma Cutter
Introducing the Plasma CUT45 D: Your Ultimate Portable Cutting Powerhouse! At Canaweld, we understand the need for quick and precise cuts in the field or at the shop. That's why we proudly present the Plasma CUT45 D - a powerful and portable plasma cutting machine designed to meet all your cutting demands with unparalleled efficiency. Cut Like a Pro The Plasma CUT45 D is engineered to deliver clean cuts in steel up to 5/8-inch (15mm) thick, while its sever cutting capability extends up to an impressive 0.8-inch (20mm) thickness. Say goodbye to tedious cutting processes and hello to swift, accurate results! Powerful and Portable Don't let its compact size fool you! This plasma cutting machine is packed with power, making it the perfect companion for welding tasks on the go. Its lightweight design ensures easy transportation, giving you the freedom to move seamlessly between work sites. Dual Voltage Capability Adaptability is key, and the Plasma CUT45 D has it covered. With dual voltage capability, this cutting equipment can be used with a generator or in the shop, providing ultimate flexibility and convenience for any job. Precision and Performance Welders who demand quick cuts with precision will be impressed by the Plasma CUT45 D. Its advanced technology and expert craftsmanship guarantee the accuracy and quality of every cut you make, giving you the confidence to take on any cutting challenge. Unleash Your Potential Empower yourself with the Plasma CUT45 D and experience the freedom of quick, precise cuts at your fingertips. Whether you're working on a construction site or handling oil and gas projects, this plasma cutting machine will be your go-to tool for cutting excellence. Canaweld - Your Partner in Cutting Excellence At Canaweld, we take pride in providing high-quality welding machines and accessories for the oil and gas industry. The Plasma CUT45 D is a testament to our commitment to excellence and innovation. With its cutting-edge technology, power, and portability, this cutting machine is a must-have for welders and fabricators alike. Take control of your cutting tasks like never before. Embrace the power of the Plasma CUT45 D and elevate your welding and cutting projects to new heights of precision and efficiency. Canaweld - Empowering Your Welding Success!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Downhole Tools
Streamline Wellbore Cleanout with HOCA Oil Tools' Sand Pump Bailers In the fast-paced and ever-evolving oilfield industry, efficiency and reliability are paramount. HOCA Oil Tools, a leader in innovative downhole solutions, introduces the Sand Pump Bailer – a cutting-edge tool designed for the effective cleanout of sand, debris, and other obstructions from wellbores. This essential tool is part of our comprehensive range of downhole slick line tools, engineered to enhance the safety and efficiency of your operations. Innovative Solutions for Complex Challenges: The Sand Pump Bailer The HOCA Sand Pump Bailer is specifically designed to address the challenges associated with sand and debris accumulation in the wellbore. Utilizing a simple yet effective mechanism, it allows for the removal of obstructive materials, ensuring a clear path for production and extending the life of the well. Constructed with high-quality materials, the Sand Pump Bailer withstands the harsh downhole environment, delivering consistent performance and durability. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to delivering solutions that meet the unique needs of the oil and gas industry. Our Sand Pump Bailers embody this commitment, providing an efficient, safe, and cost-effective solution for wellbore cleanout challenges. With a focus on innovation, quality, and customer service, we ensure that our tools not only meet but exceed the expectations of our clients. Incorporate HOCA's Sand Pump Bailers into your downhole operations and experience a new standard of efficiency and reliability. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your wellbore operations. Leverage the power of advanced downhole solutions with HOCA Oil Tools. Our Sand Pump Bailers are more than just tools – they are partners in your operational success, ensuring that your wells remain productive, safe, and free from obstructions.
Buy
In Stock
Product & Service
New
API
Air Freight
High Efficiency Miner's Cap Lamp Portable Charger
Power Up Your Mining Gear with the Wisdom NWB-20 Charger from Provix Provix is excited to present the Wisdom NWB-20 Charger, a high-efficiency portable charger that is a game-changer for mining professionals. Tailored to meet the demanding needs of the mining industry, this charger offers reliable, fast, and efficient charging for your equipment. Versatile and Efficient Charging Solution The NWB-20 Charger features a wide-ranging AC input of AC 100-240 V ± 10%, 0.24 A, 50-60 Hz, making it suitable for global use. Additionally, its DC input of 7~30 V, 1.7 A, adds to its versatility, allowing it to adapt to various power sources. Optimized for Wisdom Mining Lamps Designed to complement Wisdom's line of mining lamps, the NWB-20 provides a maximum DC output voltage of 4.20 ± 0.05 V and a DC output current of 2000 mA ± 100 mA. It ensures efficient charging times of 6.5 hours for the KL8M and 4.5-6.5 hours for the KL5M, reducing downtime and increasing productivity in mining operations. Compact, Lightweight, and Portable The NWB-20 Charger is designed for portability and ease of use. It measures 116 x 76 x 56 mm (4.6 x 3.0 x 2.2 in) and weighs only 215 g (7.58 oz), making it easy to carry and store. This compact design is ideal for miners who need a reliable charging solution on the go. Reliable and Durable Charging Accessory This charger is not just about power; it's about durability and reliability. Its robust construction ensures it can withstand the harsh conditions often found in mining environments, providing consistent performance over time. Get the NWB-20 Charger Today Upgrade your mining equipment with the Wisdom NWB-20 Charger for a more efficient, reliable, and portable charging solution. Visit Provix to learn more about how this charger can benefit your mining operations. Explore our products at www.provix.net or contact our team for detailed information.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
SMAW Welder
Unleash the Power of Versatility with the Stickwelder 162 D! At Canaweld, we understand the diverse welding needs of the construction, oil & gas industries, and more. That's why we are thrilled to introduce the Stickwelder 162 D - a welding marvel that offers high-quality performance across a wide range of metals and thicknesses, ensuring impeccable results in every project. Portable Powerhouse The Stickwelder 162 D is designed to be your reliable companion, offering portability, power, and versatility in one compact unit. Whether you require Stick Welding or TIG welding with a lift start, this welding machine rises to the occasion, delivering consistent and exceptional welds. Safety and Efficiency Combined We understand the challenges of adverse conditions, which is why we've equipped the Stickwelder 162 D with an extra function that reduces power draw, ensuring safer and more efficient performance in challenging environments. When precision matters, trust the Stickwelder 162 D to get the job done. Ideal for Light to Medium Duty Projects From construction sites to oil & gas projects, the Stickwelder 162 D is the ideal choice for light to medium-duty projects, providing reliability and flexibility in all weather conditions. Its lightweight construction and convenient carrying belt make transportation a breeze, ensuring you can take this welding powerhouse wherever the job demands. Weld with Confidence Enjoy excellent arc characteristics with the most common rods up to 5/32 inches, providing you with the confidence to tackle a variety of welding tasks. Experience low power consumption, making it energy-efficient and eco-friendly. Ready for the Outdoors The Stickwelder 162 D is designed to work outdoors with the appropriate power generator, offering you the freedom to take on welding projects wherever they may be. It's fan-cooled and thermally protected, ensuring durability and performance even in demanding conditions. The Canaweld Promise With Canaweld's Stickwelder 162 D, you can rely on the Canaweld promise of excellence and durability. Our comprehensive 3-year warranty further solidifies our commitment to quality and customer satisfaction. Get the job done right with the Stickwelder 162 D. Embrace the power of versatility, portability, and efficiency, and elevate your welding experience with Canaweld. Whether you're on a construction site or in the oil & gas industry, trust the Stickwelder 162 D to deliver flawless welds. Choose the welding machine designed with your needs in mind - the Stickwelder 162 D. Welding Perfected!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Software Development
ELEKS: Empowering Energy Sector Transformation with Blockchain Solutions In the dynamic landscape of the energy sector, innovation isn't just a trend – it's a necessity. ELEKS, as a trailblazer in software engineering, brings to the table a game-changing proposition that holds the potential to reshape the energy industry: blockchain-powered business solutions. Through our deep-rooted energy sector technology expertise, we're introducing a new era of possibilities that redefines data management, transparency, security, and efficiency. Here's a glimpse into how ELEKS can be your partner in harnessing the full potential of blockchain technology for unparalleled growth: Empower Data Management: Blockchain technology is a game-changer in data management. ELEKS' solutions enable energy companies to handle data with unprecedented efficiency, accuracy, and security. Asset Ownership Tracking: Say goodbye to ambiguity. Our blockchain-powered solutions provide a foolproof system for tracking asset ownership, ensuring transparency and accountability. Swift and Secure Transactions: Energy trading just got a whole lot smarter. ELEKS leverages blockchain to facilitate quick and secure settlement and recording of transactions, eliminating intermediaries and streamlining processes. Elevated Business Transparency: Transparency is no longer a challenge. Our blockchain solutions bring transparency to the forefront, ensuring all stakeholders have access to real-time, tamper-proof data. Auditability Redefined: Auditing becomes a breeze. ELEKS' blockchain solutions offer auditability beyond comparison, giving regulatory bodies instant access to secure and tamper-proof energy data. Unprecedented Security: Security isn't an option; it's a mandate. Our solutions empower energy companies to maintain robust security protocols, ensuring data integrity and mitigating risks. Regain Control: Ownership with control. Our blockchain-powered solutions allow data source owners to maintain complete control over security and accessibility, reinforcing trust and control. Efficiency Unleashed: Efficiency is the heart of our solutions. By eliminating intermediaries and enhancing data accuracy, we drive efficiency to new heights. Data-Driven Decision Making: Make informed decisions, backed by reliable data. ELEKS' solutions equip energy companies with accurate and real-time insights, facilitating data-driven strategies. ELEKS: Your Path to Energy Innovation ELEKS isn't just a service provider; we're your innovation enabler. With our energy sector technology expertise, we're not just implementing blockchain solutions – we're rewriting the energy sector narrative. Our goal is to empower energy companies with the tools they need to thrive in a data-centric world. Embrace a future where blockchain technology shapes your energy operations, revolutionizing data management, transparency, and efficiency. With ELEKS by your side, the possibilities are limitless, and your journey towards energy innovation is destined for success.
Service
Made to Order
Service
New
ISO
SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT
Service
In Stock
Service
New
ISO
Streamline Your Production with Panel Cutter Leasing from CWB National Leasing Enhancing Your Manufacturing Precision and Efficiency with Advanced Equipment Solutions For businesses involved in woodworking, construction, or any industry requiring precise panel cutting, having reliable and efficient panel cutters is crucial for maintaining productivity and quality. Leasing panel cutters through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially astute solution for businesses seeking to upgrade their cutting capabilities. Here’s how leasing panel cutters can benefit your business: 1. Quick Access to High-Precision Cutting Equipment CWB National Leasing values the efficiency of your production processes and offers a rapid leasing process. Decisions are typically made within 48 hours of your application, ensuring that your panel cutters can be delivered and operational quickly. This swift service minimizes downtime and enhances your production capacity, allowing you to meet project deadlines and customer demands more effectively. 2. Increased Financial Flexibility Leasing panel cutters with CWB National Leasing boosts your buying power. It allows you to free up capital by opting for periodic payments over a significant initial purchase. The flexibility to add extra features or accessories to your panel cutters for a small payment increase allows for customization to meet specific production demands. 3. Effective Cash Flow Management Manageable lease payments over the term mean your panel cutters start contributing to your business’s revenue while still being paid off. This approach helps maintain a healthy expense-to-revenue ratio, which is key for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing panel cutters can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease panel cutters through CWB National Leasing is a strategic decision that equips your business with essential cutting equipment while maintaining financial agility. It ensures access to high-quality panel cutters, vital for precise and efficient cutting operations, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business to excel in its respective industry.
Service
In Stock
Service
New
ISO
Electronic Pressure Gauge
Houston Digital Instruments (HDI) is excited to present the 1000B Pressure Gauge System, a high-performance solution designed to meet your pressure measurement needs. With its intrinsically safe, solid-state electronic design, this gauge system provides accurate and easily readable pressure readings in any lighting conditions. Unparalleled Readability and Accuracy: The 1000B Pressure Gauge System is engineered to deliver exceptional readability, ensuring that you can access crucial pressure information with ease. Regardless of the lighting conditions in your environment, the gauge's display remains clear and easily visible. With a measurement range of up to 20,000 psi and an accuracy of 0.50% of full scale, you can trust that your pressure readings are precise and reliable. Versatile Application: The 1000B is designed to serve as either a primary or secondary display, offering flexibility for your specific requirements. With slave/secondary display options available, you can easily integrate the gauge system into your existing setup. Each 1000B consists of a Gauge Display, Inline Cable, and Sensor Assembly, allowing for convenient placement of the display relative to the connection point. Benefit from the versatility and adaptability of our field-proven platform, which has been refined over 30 years of industry experience. Durability and Low Maintenance: At HDI, we prioritize safety, accuracy, reliability, and low maintenance for our customers. The 1000B Pressure Gauge System is battery-powered, eliminating the need for external power sources and providing hassle-free operation. With a field repairable system, you can minimize downtime and reduce maintenance costs, ensuring continuous and efficient pressure monitoring. The low battery indicator keeps you informed of the system's power status, enabling you to stay prepared and maintain uninterrupted performance. Tailored to Your Application: The 1000B can be combined with various sensor types for pressure, load, force, and torque applications in a wide range of industries. Our team of experts is ready to assist you in selecting the optimal configuration for your specific needs. Whether you require 2" Male NPT, 2" 1502, 2" 2002/2202, or flanged connections, we offer customization options to seamlessly integrate the gauge system into your setup. Achieve accurate and reliable pressure measurements that meet your unique application requirements. Exceptional Performance in Demanding Environments: We understand that certain industries present challenging conditions, including high vibration environments. The 1000B Pressure Gauge System is engineered to deliver consistent performance, even in such demanding settings. With its solid-state platform, free from fluids or moving parts, the gauge system ensures durability and reliable operation in the face of vibrations and harsh environmental conditions. Expand Your Measurement Capabilities: Upgrade your pressure measurement capabilities with the 1000B Pressure Gauge System. Benefit from its reliable performance, durability, and ease of use. With configuration options such as 4-20mA output, 4-20mA input, backlighting, externally powered options, 0-1 volt output, and secondary display compatibility, you can tailor the system to your specific requirements. Contact Houston Digital Instruments today to discuss your specific application needs. Our team of experts is dedicated to helping you select the ideal solution for your pressure measurement requirements. Trust HDI for excellence in measurement and monitoring solutions. Together, we'll achieve efficiency, safety, and success.
Buy
In Stock
Manufacturer
New
API
Air Freight
Welder
Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Downhole Tools
Maximize Well Integrity and Performance with HOCA Oil Tools' Tubing Drifts In the complex and demanding environment of oil and gas extraction, ensuring the integrity and functionality of downhole tubing is paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance the safety, efficiency, and productivity of your operations. Our Tubing Drifts stand out as a testament to our commitment to quality and precision in downhole slick line tools. HOCA’s Tubing Drifts: Precision Engineered for Optimal Performance Tubing Drifts are essential tools designed to ensure the clear passage within downhole tubing, preventing costly blockages and ensuring the smooth operation of subsequent downhole tools and processes. Made from high-quality materials and engineered to meet rigorous industry standards, HOCA Oil Tools’ Tubing Drifts are designed to provide accurate measurements and clearances, ensuring your tubing is free from obstructions and ready for operation. Experience the HOCA Difference in Downhole Operations At HOCA Oil Tools, our mission is to provide the oil and gas industry with downhole tools that exceed industry standards and meet the complex demands of modern drilling and extraction processes. Our Tubing Drifts embody this mission, offering precision, reliability, and efficiency to enhance your downhole operations. Incorporating HOCA’s Tubing Drifts into your downhole tool inventory signifies a step towards optimized well maintenance, enhanced safety, and increased operational efficiency. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your success with innovative solutions and expert service. Choose HOCA Oil Tools’ Tubing Drifts for your downhole operations and join the ranks of satisfied customers who trust our tools to maintain the highest standards of well integrity and performance. Elevate your downhole operations with HOCA Oil Tools – where quality meets innovation.
Buy
In Stock
Product & Service
New
API
Air Freight
Unveiling Subsurface Precision: InWaTec Combined's PMIT Services for Optimal Wellbore Assessment In the ever-evolving landscape of the oil and gas industry, the quest for precision in subsurface analysis is relentless. InWaTec Combined's Platform Multifinger Imaging Tool (PMIT) Services stand at the forefront of this quest, offering unparalleled accuracy in the radial measurement of tubing and casing strings' internal diameters. The PMIT is an innovation par excellence, a multifinger caliper tool that delves into the heart of the wellbore to capture highly precise data. This tool is not just a measuring device; it is the embodiment of accuracy and technological sophistication. With its multiple sensor fingers, the PMIT glides along the tubing or casing surface, meticulously logging variations in the internal diameter that could indicate potential issues such as corrosion, wear, or deformation. Our PMIT services are crucial for ensuring the integrity and performance of downhole tubulars. With its ability to provide a 360-degree internal view, the PMIT helps operators make informed decisions about maintenance, workover needs, and overall well management. The accuracy of the PMIT’s measurements allows for the early detection of anomalies that, if left unchecked, could lead to operational failures or safety hazards. At InWaTec Combined, we believe that a thorough understanding of the wellbore condition is essential for the longevity and productivity of wells. Our PMIT Services deliver this understanding through detailed assessments that support proactive intervention strategies. The data gathered by the PMIT facilitates accurate planning for remedial operations, ensuring that any service performed is targeted and effective. In an industry where the margin for error is increasingly narrow, the PMIT offers a significant advantage. Operators can trust the data from our PMIT Services to reflect the true conditions within their wells, providing a solid foundation for all subsequent operational decisions. Choose InWaTec Combined's PMIT Services for your wellbore assessment needs, and experience the confidence that comes from precision technology and detailed, actionable data. Our commitment is to provide you with the insights necessary to maintain the highest standards of well integrity and performance. With InWaTec Combined, you are not just measuring the depths—you are mastering them.
Service
In Stock
Service
New
API
Land Freight
Back Pressure Turbine
Unleash Unprecedented Power with the Kessels MS-102 Multistage Steam Turbine: The Apex of Efficiency and Reliability In the oil and gas industry, where power and precision are non-negotiable, Kessels Steam Turbines proudly presents the MS-102 Multistage Steam Turbine – a true marvel of engineering designed to redefine excellence in the world of steam turbines. Mastering Back-Pressure Turbines Back pressure turbines have long been the cornerstone of industrial steam applications, and our MS-102 Multistage Steam Turbine takes their capabilities to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines are the linchpin between boiler units and process steam headers, revolutionizing steam utilization and power generation. Efficiency Beyond Compare At the heart of the MS-102 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning perfectly with process demands. Every unit of electrical power generated is consumed precisely as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-102 turbine is not merely a machine; it's a versatile powerhouse ready to excel in an array of applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-102 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature is invaluable when low-volume steam demands and high tolerance for pressure variations are essential. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-102 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the most demanding environments. Unparalleled Versatility: Adapt effortlessly to changing needs, be it for drive applications or eco-friendly power generation, knowing that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-102 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You.
Buy
Made to Order
Manufacturer
New
ISO
Air Freight
Cybersecurity
Elevate Your Security with ALCiT's SonicWall Partnership In the ever-evolving realm of cybersecurity, one name stands tall: SonicWall. This multi-award-winning titan has carved a niche as one of the premier cybersecurity companies, protecting networks and emails with unmatched prowess. ALCiT proudly partners with SonicWall, bringing you a gateway to fortified security that leaves no vulnerabilities unchecked. SonicWall: Guardian of Digital Realms Recognized as a cybersecurity powerhouse, SonicWall's reputation is written in awards and innovation. As threats grow in complexity, SonicWall evolves in protection. ALCiT joins forces with SonicWall, offering a shield against threats that's unmatched in the industry. Network Protection Redefined Versatile Security Portfolio: SonicWall's arsenal is ever-expanding, offering a diverse suite of security solutions. Whether you have a single office or a sprawling network, SonicWall's options cater to your needs. Your Partner in Selection: With ALCiT's guidance, you'll find the perfect SonicWall solution that suits your unique requirements. We're not just service providers; we're architects of your security fortress. Seamless Deployment, No Upfront Cost: Embrace the future with ALCiT's Firewall as a Service. Wave goodbye to outdated and insecure firewalls. Embrace the power of a Next Generation Firewall, without the burden of hefty upfront costs. Fortify Your Security Today, Not Tomorrow Why wait for threats to strike? With ALCiT's SonicWall partnership, your security's future starts now. Embrace the power of next-level protection and thrive in a landscape where your network and emails remain impervious to attacks. Secure Your Future Today ALCiT's partnership with SonicWall isn't just a collaboration; it's a commitment to your security's evolution.
Service
Made to Order
Service
New
ISO
Enhance Your Workspace with Desk Leasing from CWB National Leasing Creating an Efficient and Productive Office Environment with Flexible Furnishing Solutions For businesses looking to create or revamp their office spaces, having the right desks is crucial for ensuring a productive and comfortable work environment. Leasing desks through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to optimize their workspace. Here’s how leasing desks can benefit your business: 1. Quick Access to Modern Office Furniture CWB National Leasing values the importance of a well-equipped office space in enhancing productivity. They offer a fast leasing process, with decisions typically made within 48 hours of your application. This rapid service ensures that your desks can be delivered and set up quickly, transforming your office space without significant delays. 2. Increased Financial Flexibility Leasing desks with CWB National Leasing enhances your financial power. It allows you to conserve capital by opting for periodic payments over a large upfront purchase. The flexibility to add extra features or accessories to your desks for a small payment increase allows for customization to meet specific office needs and ergonomic considerations. 3. Effective Cash Flow Management Manageable lease payments over the term mean your desks start contributing to your business’s efficiency while they're being paid off. This approach helps maintain a balanced expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing desks can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease desks through CWB National Leasing is a strategic decision that equips your business with essential office furniture while maintaining financial flexibility. It ensures access to high-quality desks, vital for creating a productive and comfortable working environment, without the financial strain of a large upfront investment. This leasing approach enables enhanced office aesthetics, improved employee comfort, and increased overall productivity, helping your business to thrive in a competitive corporate landscape.
Service
In Stock
Service
New
ISO
Navigating the Oil and Gas Industry's Communication Challenges: A Spotlight on Nulux's P2P and Multipoint Radio Networks The expansive terrains and remote operation sites intrinsic to the oil and gas industry have perennially posed a daunting challenge: Ensuring stable, secure, and robust communication across vast distances and through obtrusive terrains. At Nulux Network Solutions, we deliver pioneering wireless infrastructure solutions, particularly focusing on Point to Point (P2P) and Multipoint Radio Networks, ensuring that your teams, whether in the office or in the field, are never out of sync. Understanding the Nuances: P2P and Multipoint Networks In the vast expanses where the oil and gas operations unroll, the requirement for crisp and clear communication is pivotal. It is imperative to understand the differential utility of P2P and Multipoint networks, especially in an industry where both localized and widespread communications are equally critical. Point to Point (P2P) Networks: Facilitating a dedicated data link between two distinct points, P2P networks are synonymous with secured, streamlined, and rapid communication, usually empowered by a dedicated line, ensuring that data integrity and security are never compromised. Multipoint Networks: Contrasting with P2P, multipoint networks allow a single communication line to interlink more than two points, ensuring that a centralized communication hub can effectively communicate with multiple nodes in a network. Unlocking Unparalleled Advantages with Nulux The choice between P2P and Multipoint networks isn’t binary but is instead driven by the unique operational requisites of your establishment. Fortified Productivity: The capability to ensure that every node, every team member is always in the loop, effectively eliminating communication bottlenecks and fostering enhanced productivity and decision-making prowess. Bolstering Security: Especially with P2P networks, where the communication link is exclusive and dedicated, the risk of data interception or unauthorized access is minimized, ensuring that your data flows securely. Cost-Effective Scalability: In terrains or circumstances where laying physical communication lines is implausible or exorbitantly expensive, our wireless networks offer a scalable, cost-effective alternative. Dedicated to Driving Innovation in Wireless Communication As technology evolves, so does the complexity and scale of oil and gas operations. Nulux, with a rich tapestry of experience in designing and implementing wireless systems, is at the forefront, engineering solutions that not only cater to the present but are also agile enough to adapt to future demands and technological evolutions. Our commitment goes beyond merely delivering solutions. We aspire to be partners in your journey, ensuring that as your operations expand, scale, and evolve, your communication infrastructure is not just a silent spectator but a dynamic enabler, effortlessly adapting and scaling to meet your growing needs. In a realm where every second count, where the magnitude of decisions is colossal, and where communication isn’t merely a need but a critical operational requisite, Nulux Network Solutions stands as a beacon of innovative, reliable, and secure wireless communication solutions. Connect with us, and let’s script the future of wireless communication in the oil and gas industry, together.
Service
In Stock
Service
New
ISO
Personal FX Services
Unlock the Power of Repatriation with Dunbridge Financial's Personal Services: Seamlessly Send Funds Back Home Are you an expat looking to make purchases back in your home country or wanting to send money to your family? Look no further than Dunbridge Financial's Personal Services. We understand the importance of repatriation, and our mission is to make it easy and efficient for you to manage your funds across borders. Repatriation Made Effortless with Dunbridge Financial Repatriating funds can be a daunting task, but with Dunbridge Financial, it's as easy as a few clicks. Whether you're an expat purchasing assets in your home country or supporting your loved ones from afar, our Personal Services are designed to meet your unique financial needs. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial requirements. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is the cornerstone of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is of utmost importance to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Experience Seamless Repatriation Don't let repatriating funds become a burden. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you're an expat making purchases back home or supporting your family, we are here to make your financial journey a breeze. Simplify your repatriation with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Empower yourself to manage your funds across borders with confidence and ease.
Service
Made to Order
Service
New
ISO
Air Freight
Maximize Your Business Flexibility with Flat Deck Trailer Leasing from CWB National Leasing Enhancing Your Transportation Capabilities with Smart Leasing Solutions For businesses that require versatile transportation solutions, flat deck trailers are invaluable. They offer the flexibility to transport a wide range of goods, from construction materials to heavy equipment. Leasing flat deck trailers through Canadian Western Bank (CWB) National Leasing provides a strategic, adaptable, and financially beneficial option for your business. Here’s how leasing flat deck trailers can support your operational needs: 1. Swift Equipment Access CWB National Leasing recognizes the importance of minimizing downtime in your operations. Their leasing process is designed for speed, with decisions on applications typically made within 48 hours. This efficiency means your flat deck trailers can be delivered and ready for use quickly, ensuring your transportation and logistics operations continue seamlessly. 2. Enhanced Financial Flexibility Leasing flat deck trailers with CWB National Leasing boosts your buying power. Opting for periodic payments instead of a large upfront purchase helps free up cash for other essential business activities. Additionally, the option to add extra features or accessories to your trailers for a small payment increase allows for customization according to your specific business requirements. 3. Effective Cash Flow Management With smaller lease payments over the term, your flat deck trailers begin to contribute to your business’s revenue while still being paid off. This approach helps in maintaining a healthy balance between expenses and income, which is crucial for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers flexible payment options, including seasonal, semi-annual, or annual plans, tailored to align with your business’s revenue cycle. This flexibility is particularly advantageous for businesses with fluctuating or seasonal income, ensuring that payments are manageable and suit your financial flow. 5. Potential Tax Advantages Leasing flat deck trailers can offer tax benefits, such as allowing you to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor can help you understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease flat deck trailers through CWB National Leasing is a strategic move that equips your business with essential transportation resources while maintaining financial agility. It ensures access to versatile trailers necessary for a wide range of transportation needs without the financial strain of a large initial investment. This leasing approach enables enhanced operational efficiency, business expansion, and increased profitability in your diverse business ventures.
Service
In Stock
Service
New
ISO
Welder
Introducing the Multiprocess 231 SLM: Your Ultimate Welding Powerhouse for the Oil and Gas Industry Are you seeking a welding machine that can do it all? Look no further than the Multiprocess 231 SLM by Canaweld. Our multi-process welding machines are the all-in-one solution you've been searching for, capable of handling MIG welding, MIG Brazing, Flux Cored welding, Flux Cored Gas Less welding, TIG welding, and Stick welding with ease. Unleash the Power of Versatility At Canaweld, we take pride in offering a wide range of multi-process welders to cater to your specific needs. Whether you require an industrial heavy-duty model, a high-tech, programmable welder with an LCD panel, or a portable unit, our production lines have got you covered. Our multi-process welders handle a variety of materials, from mild steel, stainless steel, and aluminum (with or without a spool gun) to chrome molybdenum, titanium, and copper alloys. Empowering Your Welding Journey The Multiprocess 231 SLM represents the pinnacle of welding innovation. This high-tech, synergetic, powerful, and portable inverter welder is equipped with an LCD panel and a convenient saving program facility. Its unmatched capabilities allow for Stick welding, MIG welding, Flux cored welding, and TIG welding with lift start in manual or synergic mode. Experience the perfect balance of simplicity and precision with synergic control and job programming, making it ideal for welders of all experience levels. Save time and costs on machine setup as the LCD display walks you through the process step by step, automatically adjusting parameters to meet your specific needs. It's like having your own personal welding expert right beside you! Adaptable to Your Work Environment The Multiprocess 231 SLM is designed to accommodate your work environment, featuring selectable voltage options of 230 V (±15%) or 115 V (±15%). It doesn't matter where your welding projects take you; this versatile machine adapts seamlessly to any single voltage electrical network. From novice welders to professional production welders, this unit is the ultimate choice for those who demand speed and exceptional quality. Built for Excellence Experience unrivaled welding performance with Canaweld's spool gun compatibility, ensuring trouble-free Aluminum MIG welding. The machine's robust, professional, and heavy-duty wire-feeding mechanisms guarantee smooth and reliable wire feeding, while the 'Energy Saving' function optimizes power source cooling fan operation for efficient energy usage. Total Control at Your Fingertips The Multiprocess 231 SLM puts you in control with its array of adjustable parameters. From voltage, wire speed, wave form, and burn back in the MIG process to material, wire diameter, gas, 2T/4T in MIG, and current, down slope, and post gas in TIG, this welder empowers you to achieve flawless welding results, no matter the project. Designed for Endurance Tested to withstand the toughest conditions, the Multiprocess 231 SLM is built to excel even in extreme heat of 104°F/40°C. Its metal face panel adds to its durability, ensuring it can handle any challenging environment. Our Commitment to Quality At Canaweld, we stand by the quality and reliability of our products. That's why the Multiprocess 231 SLM comes with a comprehensive 3-year warranty, providing you with peace of mind. Discover the Future of Welding Elevate your welding projects to new heights of efficiency and excellence with the Multiprocess 231 SLM by Canaweld. Embrace the power of versatility, precision, and control. Don't settle for ordinary; choose the welding powerhouse trusted by professionals in the oil and gas industry. Experience the Multiprocess 231 SLM for yourself. Invest in the welding machine of tomorrow, backed by Canaweld's dedication to innovation, quality, and customer satisfaction. Unleash your welding potential with the Multiprocess 231 SLM by Canaweld.
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Boost Your Cleaning Efficiency with Vacuum Leasing from CWB National Leasing Enhancing Your Business Operations with Flexible and Economical Equipment Solutions For businesses in the janitorial, hospitality, or commercial cleaning industries, high-quality vacuums are essential tools for maintaining cleanliness and hygiene. Leasing vacuums through Canadian Western Bank (CWB) National Leasing offers a practical and financially sound solution to meet your cleaning requirements. Here’s how leasing vacuums can benefit your business operations: 1. Rapid Equipment Access CWB National Leasing understands the importance of maintaining operational continuity. They provide a fast leasing process, typically making decisions within 48 hours of application submission. This efficiency ensures that your vacuums can be delivered and ready for use quickly, enhancing your cleaning operations without delay. 2. Increased Financial Flexibility Leasing vacuums with CWB National Leasing boosts your purchasing power. Opting for periodic payments over a substantial initial purchase frees up capital for other vital business needs. The option to add extra features or accessories to your vacuums for a small payment increase allows for customization to meet specific cleaning demands. 3. Effective Cash Flow Management Manageable lease payments over the term allow your vacuums to start contributing to your business’s revenue while they're still being paid off. This balanced financial approach helps maintain a healthy expense-to-revenue ratio, crucial for business growth and stability. 4. Customizable Payment Plans CWB National Leasing offers various payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is especially beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing vacuums can offer tax benefits, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease vacuums through CWB National Leasing is a strategic decision that equips your business with essential cleaning equipment while maintaining financial flexibility.
Service
In Stock
Service
New
ISO
Downhole Tools
Optimize Your Well Performance with HOCA Oil Tools' Swabbing Mandrel Assembly In the specialized field of downhole operations within the oil and gas industry, the demand for high-quality, efficient, and reliable tools has never been higher. At HOCA Oil Tools, we stand at the forefront of downhole innovation, providing our clients with advanced solutions designed to optimize well performance and enhance operational efficiency. One such innovation is our Swabbing Mandrel Assembly, a key component in maintaining well pressure and fluid levels. Introducing HOCA's Swabbing Mandrel Assembly: Precision and Efficiency Downhole The HOCA Swabbing Mandrel Assembly is engineered for optimal performance in fluid lifting and wellbore cleaning operations. Designed with the end-user in mind, our Swabbing Mandrels are built from high-grade materials to withstand the rigors of the downhole environment, ensuring durability and long-term service. Compatible with a variety of tubing sizes, our assemblies are tailored to meet the specific requirements of your well operations. Elevating Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to advancing the capabilities of the oil and gas industry through our innovative downhole solutions. Our Swabbing Mandrel Assembly is a testament to this commitment, offering a blend of precision, efficiency, and reliability that sets new standards for well performance and maintenance. Integrating HOCA’s Swabbing Mandrel Assembly into your downhole operations means investing in the future of your wells. Not only do our tools enhance operational efficiency, but they also contribute to the overall safety and sustainability of your operations. With HOCA, you're not just purchasing a tool; you're acquiring a partner in downhole success. Unlock the full potential of your downhole operations with HOCA Oil Tools. Experience unparalleled performance, efficiency, and reliability with our Swabbing Mandrel Assembly, and take the first step towards optimized well performance and operational excellence. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who have experienced the difference our solutions can make. Elevate your operations with the precision and quality of HOCA’s downhole solutions – where excellence meets innovation.
Buy
In Stock
Product & Service
New
API
Air Freight
Hydrogen
Unlocking the Power of Hydrogen with Lovat Gas Solutions Methane, the cleanest burning hydrocarbon, holds immense potential for fueling the future. By removing the carbon component, we are left with hydrogen, a clean and renewable source of power. Lovat Gas Solutions understands the transformative power of hydrogen and is here to assist you in realizing the full potential of this remarkable energy source. As a forward-thinking company, we recognize that hydrogen is the fuel of the future. When hydrogen is reacted in a fuel cell, it generates clean power, emitting only water vapor as a byproduct. This makes hydrogen a game-changer in the quest for sustainable and environmentally-friendly energy solutions. Our team of experts at Lovat Gas Solutions is well-versed in the hydrogen sector, equipped with over 80 years of combined experience in compressed gases. We have the knowledge, skills, and dedication to assist you in your hydrogen projects, no matter the scale or complexity. Whether you require hydrogen tube trailers to support fuel cell vehicle demonstrations or other hydrogen-related initiatives, our team is ready to provide the solutions you need. We understand the unique requirements of the hydrogen industry and can guide you through the process, ensuring seamless and efficient hydrogen supply for your projects. Why choose Lovat Gas Solutions for your mobile hydrogen supply needs? 1. Expertise in Compressed Gases: With our extensive experience in compressed gases, we possess a deep understanding of the technicalities and intricacies involved in hydrogen supply. Our team has specific expertise in the hydrogen sector, allowing us to provide tailored solutions for your unique requirements. 2. Commitment to Clean Energy: We share your passion for clean and sustainable energy solutions. By harnessing the power of hydrogen, we aim to contribute to a greener future. Let us assist you in leveraging the immense potential of hydrogen for your projects. 3. Reliable Support: Our team of experts is dedicated to providing reliable support throughout your hydrogen project. We are committed to understanding your specific needs and delivering comprehensive solutions that meet your objectives, ensuring a seamless and successful experience. 4. Collaborative Approach: At Lovat Gas Solutions, we value collaboration and partnership. We believe in working closely with our clients, understanding their goals and challenges, and developing tailored solutions that drive their success. Your satisfaction is our top priority. Embrace the future of clean energy with Lovat Gas Solutions. Contact our experts today to discuss your mobile hydrogen supply needs and how we can assist you in realizing the full potential of this transformative fuel. Together, let's power a sustainable future with hydrogen.
Buy
In Stock
Product & Service
New
ANSI
Land Freight
Business Foreign Exchange Services
Unlock Faster Payment Solutions with Dunbridge Financial: Receive Foreign Payments with Ease Are you tired of waiting for foreign payments to arrive and tired of dealing with complex international transactions? At Dunbridge Financial, we understand the frustration that comes with delayed payments from foreign companies. Our financial service is here to revolutionize the way you receive foreign payments, ensuring you get paid faster and without the hassle. Receive Foreign Payments with Ease With Dunbridge Financial, you can now say goodbye to lengthy delays and welcome faster payment solutions. We have designed our platform to make receiving foreign payments a breeze, so you can focus on growing your business without worrying about late payments. Why Choose Dunbridge Financial? 1. Streamlined Payment Processes Our platform streamlines the entire payment process, making it quick and efficient. No more dealing with complicated paperwork or slow banking systems. With Dunbridge Financial, you'll experience a seamless and hassle-free way to receive foreign payments. 2. Speed Up Your Cash Flow Getting paid faster means improving your cash flow and having more flexibility in managing your business finances. With Dunbridge Financial's fast payment solutions, you can put your money to work sooner, helping your business thrive. 3. Secure and Reliable Your financial security is our top priority. We partner with trusted payment service providers who adhere to strict security standards, ensuring that your funds and data are safe and protected at all times. 4. Expert Customer Support We are more than just a financial service provider; we are your dedicated partner in your financial journey. Our experienced team of customer support professionals is here to assist you every step of the way, providing expert guidance and personalized solutions. Join Us Today and Unlock Faster Payment Solutions Don't let delayed foreign payments hold you back. Join Dunbridge Financial today and experience a world of faster payment solutions and enhanced financial control. With our streamlined processes, secure platform, and dedicated customer support, you'll never have to worry about slow payments again. Empower your business with Dunbridge Financial. Sign up now and embrace a new era of financial efficiency and success. Receive foreign payments with ease and enjoy the benefits of faster cash flow, giving your business the edge it deserves.
Service
Made to Order
Service
New
ISO
Air Freight
Bridge Plug, Magna Range
Introducing the Magna Range Bridge Plug from ID OilTools – the ultimate solution to passing restrictions and securely setting in larger tubing or casing. Our plug has been specially designed to handle differential pressures of up to 10,000psi at 350°F, making it the perfect choice for your downhole operations. Due to the extended setting range this plug has no pressure rating and as such the differential pressures are not guaranteed, even though the plug has passed several tests in these conditions. What sets our plug apart is its extended setting range, which allows it to pass through restricted I.D. tubing, saving you valuable time and money. With case-hardened slips above and below a three-piece nitrile rubber pack-off system, our plug is designed to maintain a constant sealing pressure. The slips are specially heat-treated to ensure a secure anchoring even in P-110 casing, with a hard outer layer for gripping and a soft inner layer for easier milling. To ensure centered setting of the small diameter plug in large I.D. pipe, our Magna Range Plug features ribbed cones that direct the slips to evenly spaced positions against the pipe. And should it be necessary to remove the plug after setting, a milling process is recommended as the plug is constructed of mild steel and is not considered drillable. Don't compromise on quality and reliability when it comes to your downhole operations. Choose the Magna Range Bridge Plug from ID OilTools, and experience the ultimate in performance and efficiency.
Buy
In Stock
Product
New
API
Sea Freight
Cable Length Counter
I'm excited to share with you one of our innovative products that can greatly benefit your business. Our cable counters are designed to accurately measure material as it's threaded through the internal wheels, making it an essential tool for the oil industry. What sets our cable counters apart is their ability to add and subtract measurements, giving you precise readings of the amount of material that has been used or remaining. This feature not only saves you time but also ensures accuracy in your operations, which is crucial in the oil industry. Our cable counters are versatile and can be mounted on a pedestal or floor stand, making them easy to use and accessible for your team. This ensures that your operations run smoothly and efficiently. At Sivam, we take pride in our commitment to quality and durability. Our cable counters are built to withstand harsh environments and are made to last, giving you peace of mind and saving you money in the long run. Investing in our cable counters will give you a competitive edge in the oil industry, making your business more efficient and profitable. Contact us today to learn more about our products and how they can benefit your operations.
Buy
In Stock
Manufacturer
New
ISO
Air Freight
Miniature Bridge Plug (0.75 - 1.37 inch)
Are you in need of a high-quality, dependable bridge plug that can be deployed in small-bore conditions? Look no further than ID OilTools' Permanent Miniature Bridge Plug (PMBP)! Our PMBP system is specially designed to mechanically convert external pressure into additional sealing force, using metal grippers to withstand differential pressures of up to 7,500 PSI at 350°F with HSN elements (with other element options available upon request, such as Viton or Aflas). Our PMBPs boast a number of features that make them the ideal choice for pressure control in the 3/4" (19.05mm) to 1.75" (44mm) setting range. With a small O.D., they can be easily run in tubing with size restrictions like coiled tubing, while still forming a fluid tight seal against the tubing wall. Plus, all of our miniature bridge plugs have a pump-through check-valve option. But the benefits of our PMBPs don't stop there! They can be used in a variety of applications, including pressure control for snubbing operations, as a mechanical barrier to replace failed downhole equipment, as a mechanical barrier for coil tubing/velocity string retrieval, and for coil tubing cleanout using its pump-through feature for nitrogen purges. If you're in need of a high-quality, dependable bridge plug for small-bore conditions, look no further than ID OilTools' Permanent Miniature Bridge Plug. Contact us today to learn more about our PMBPs and how they can benefit your operation!
Buy
In Stock
Product & Service
New
API
Sea Freight
PipeDNA is a cloud-based pipe management solution
Streamlining Pipeline Pipe Inventory and Inspection Tracking with PipeDNA: Enhancing Efficiency in the Oil and Gas Industry Efficient management of pipeline pipe inventory and inspection tracking is crucial for the smooth operation of the oil and gas industry. Introducing PipeDNA, a state-of-the-art cloud-based platform designed to streamline the management of pipe and tube throughout the entire supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage pipeline pipe inventory, increase visibility, and optimize inspection processes. Comprehensive Inventory and Tracking: PipeDNA provides a comprehensive inventory management and tracking system for pipelines, enabling stakeholders to have a real-time view of their pipeline assets. From monitoring utilization and activity to analyzing trends, the platform equips stakeholders with valuable insights to make informed decisions about their pipeline pipe inventory. With enhanced visibility, stakeholders can optimize inventory levels, minimize downtime, and maximize resource utilization. Efficient Logistics Management: Managing the logistics of pipelines can be complex, but PipeDNA simplifies the process by offering robust logistics management features. Stakeholders can efficiently handle shipments, track the status of pipeline pipe in transit, and streamline documentation processes. Additionally, the platform facilitates pipe bundling, ensuring efficient grouping and transportation of pipeline pipe, leading to cost savings and improved operational efficiency. Streamlined Inspection Management: PipeDNA's inspection management capabilities extend to pipelines, allowing stakeholders to effectively manage inspection jobs across multiple sites. The platform enables seamless coordination, tracking of job statuses, and management of inspection profiles. By centralizing inspection data and streamlining workflows, PipeDNA optimizes the inspection process, ensuring compliance with industry standards and mitigating risks associated with pipeline integrity. Enhanced Identification and Traceability: PipeDNA's identification and traceability features enable quick and reliable identification of pipeline pipe, providing comprehensive details, activity history, and traceability documentation. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating easy tracking and identification of individual pipelines. By enhancing identification and traceability, PipeDNA strengthens quality control measures, streamlines recalls if necessary, and supports compliance with industry regulations. Seamless Integration of Manufacturing Data: PipeDNA seamlessly integrates manufacturing data into its platform, eliminating the need for manual data entry and reducing the risk of human errors. This integration ensures that pipeline-related data, including manufacturing details, is readily available within the system. By automating the transfer of manufacturing data, PipeDNA enables stakeholders to maintain accurate and reliable records, facilitating efficient pipeline pipe management and data-driven decision-making. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to optimize pipeline pipe inventory and inspection tracking. The platform supports barcoding and labeling systems, integrating popular barcode standards such as UPC, EAN, and QR codes. Additionally, PipeDNA is RFID ready, enabling stakeholders to seamlessly integrate RFID technologies such as labels and asset tags for efficient tracking and management of pipelines. Furthermore, the platform supports IoT data integrations using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced pipeline pipe management processes. PipeDNA revolutionizes pipeline pipe inventory and inspection tracking in the oil and gas industry, providing stakeholders with a powerful cloud-based solution. By offering comprehensive inventory and tracking capabilities, efficient logistics management, streamlined inspection processes, enhanced identification and traceability, and seamless integration of manufacturing data, PipeDNA empowers stakeholders to maximize efficiency and productivity. Embrace PipeDNA and experience the benefits of improved pipeline pipe management, increased visibility, and optimized operations in the oil and gas supply chain.
Service
Currently in Use
Service
New
ASME
Air Freight
Downhole Tools
Optimize Your Oilfield Operations with HOCA Oil Tools' Premium Landing Nipples In the demanding world of oilfield exploration and production, precision and reliability in downhole tools are paramount for operational success. HOCA Oil Tools leads the industry with its innovative lineup of Landing Nipples, designed to ensure seamless integration and operation within the wellbore. Tailored for various applications and environments, our Landing Nipples are key components in facilitating efficient downhole operations, setting new standards for performance and safety. HOCA's Landing Nipples: Engineered for Excellence in Downhole Operations Our Landing Nipples, available in a variety of types including 'BF', 'BR', 'ROTX', 'ROTXN', 'ROTR', and 'ROTRN', are designed to cater to diverse operational needs, from standard to heavy-duty applications. Each model is engineered with the highest quality materials to provide a secure and reliable seating point for wireline flow control devices, optimizing well performance and enhancing downhole safety. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and challenges of downhole operations. Our Landing Nipples are a testament to our commitment to providing innovative solutions that enhance efficiency, safety, and reliability. By choosing our products, you are not just selecting tools; you are partnering with a leader in downhole technology dedicated to your operational success. Integrating HOCA’s Landing Nipples into your downhole operations signifies a step towards enhanced operational performance, safety, and cost-efficiency. With a focus on innovation, quality, and customer service, HOCA Oil Tools is your partner for advanced downhole solutions. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your oilfield operations. Partner with us to experience the unparalleled performance, reliability, and support that come with our premium Landing Nipples. Elevate your downhole operations with HOCA Oil Tools – where technology, innovation, and expertise converge to drive success in the oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Battery for Wisdom Lamp 3A
Power Your Work with the ATEX Group II Battery – A High-Performance Solution from Provix Provix is proud to present the ATEX Group II Battery (Part # NWI-WLAMP3A-ATEX), a powerful and reliable energy source designed specifically for use in challenging industrial environments. This battery is an ideal choice for professionals who require dependable and long-lasting power for their mining and construction equipment. Exceptional Performance and Durability The ATEX Group II Battery is engineered to deliver outstanding performance. With a capacity of 2*3.5=7.0Ah, it offers a strong and consistent power supply, ensuring your equipment operates at peak efficiency. The battery boasts an impressive 11000 LUX and 240 Lumens, providing bright and clear illumination for a variety of tasks. Extended Runtime for Demanding Workdays One of the key features of this battery is its extended runtime. Capable of running for 13 hours on a single charge, it is perfectly suited for long shifts and continuous use. This extended runtime ensures that your equipment stays operational throughout your workday, minimizing interruptions and maximizing productivity. Compliance with ATEX Safety Standards Safety is paramount in industrial settings, and the ATEX Group II Battery adheres to the highest safety standards. It is specifically designed for use in potentially explosive atmospheres, meeting the rigorous requirements of ATEX Group II certification. This compliance ensures that the battery can be safely used in hazardous environments commonly found in mining and construction sites. Robust Construction for Industrial Use Constructed with durability in mind, the ATEX Group II Battery is built to withstand the tough conditions of industrial work environments. Its robust design ensures it can endure the rigors of daily use, providing reliable performance over time. Ideal for Mining and Construction Professionals Whether you are working in mining, construction, or any other industry where reliable power is crucial, the ATEX Group II Battery is an essential tool. Its combination of high performance, extended runtime, and compliance with safety standards makes it a top choice for professionals. Invest in Reliable Power with Provix Upgrade your equipment with the ATEX Group II Battery from Provix. Visit our website at www.provix.net to learn more about this high-quality battery and explore our wide range of specialized mining and construction equipment. Power your work with the best – choose Provix.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Tank Truck
Tank Trucks are used to transport a variety of liquids, such as chemicals, liquids, gases, beverages and dry goods, such as grain. Given the expensive and complex nature of tank truck equipment, the specialized skillset required of our drivers, and the increased regulatory environment facing, tank truck carriers deal with the challenges of all trucking companies and many which are unique to the tanker industry. Tank Trucks haul hazardous products, such as petroleum products, chemicals, gases, and hazardous wastes. They also haul non-hazardous materials such as bulk foods and dry bulk products such as cement.
Buy
Currently in Use
Product & Service
Used
ISO
Land Freight
Oclansorb Antipollution
Oclansorb is 100% organic and non-toxic material which absorbs oil on contact. This oil absorbent is biodegradable and can be used on land and on water. Oclansorb is made from sphagnum peat moss and will absorb oil and hydrocarbons but not water. It is 15 times more absorbent than clay, translating into one 18 pound bag of Oclansorb being as effective as 450 pounds of clay. This improves the efficiency of clean-up operations as only 1 bag of Oclansorb replaces the shipping and handling of nine 50 pound bags of clay. On land, apply Oclansorb over the area with hydrocarbon contamination and lightly brush the Oclansorb around. The surface can be dry or wet, as Oclansorb does not absorb water. The oil is absorbed on contact, and the captured volumes can be disposed of in landfills or incinerated (as approved by local authorities). On water, cover the oil with Oclansorb as completely as possible. In wavy or flowing conditions, a boom should be used to concentrate the oil. The hydrocarbon will absorb on contact with Oclansorb, and mixing the material to expose more surface area to the hydrocarbons increases absorption.
Buy
In Stock
Product & Service
New
ASME
Air Freight
KEY360
SSG Consulting is a Project, Engineering and Construction Management Consulting firm, specializing in the implementation of Business and Project Management solutions on Mega projects in various industries. - Authorised KEY360 channel partner Our services cover the following: - Project Advisory & Audits - EMPCM Execution - Specialist Project Controls & Forensics - Project Digitalisation - Project Resourcing - Analytics & Dashboarding Our Track Record: - 25 BILLION MANAGED VALUE - 300 MILLION PLATFORM TRANSACTIONS - 80 DEDICATED STAFF - 10X BUSINESS PROCESSES IMPROVEMENT
Service
In Stock
Service
New
ISO
EnviroBlu Cleaner and Degreaser
Revolutionizing Industrial Cleaning: The 1000 Litre IBC of EnviroBlu At Mekapisk EnviroBlu Solutions Inc., we’re driven by a relentless pursuit of innovation and sustainability. Imagine a cleaning solution that’s not just powerful but also designed for the most demanding environments—continuous cleaning operations, remote locations, and mobile solutions. Introducing the 1000 litre IBC of EnviroBlu cleaner. This isn't just a product; it's a paradigm shift in industrial maintenance. The EnviroBlu Vision Our mission is simple: to create a cleaner, safer world for everyone. Built on the indigenous values of respecting and protecting our lands and waters, Mekapisk EnviroBlu Inc. and the EnviroBlu brand are dedicated to transforming industries through sustainable practices. Why EnviroBlu? Unparalleled Efficiency and Cost Savings In the industrial world, time is a precious commodity. The 1000 litre IBC of EnviroBlu cleaner is engineered for efficiency. Our advanced aqueous surfactant technology penetrates dirt and grime at the molecular level, ensuring rapid and thorough cleaning. Whether you’re running continuous operations, working in remote locations, or need a self-contained mobile solution, EnviroBlu gets the job done faster, cutting down cleaning time significantly. 1. Continuous Cleaning Operations For facilities requiring round-the-clock cleanliness, the 1000 litre IBC of EnviroBlu is a game-changer. Its large capacity ensures you have a consistent supply of powerful cleaner, reducing downtime and keeping your operations running smoothly. No more frequent refills; just uninterrupted, efficient cleaning. 2. Remote Locations In remote areas, logistics can be a challenge. The 1000 litre IBC of EnviroBlu provides a self-sufficient solution, eliminating the need for constant resupply. Its robust design and high capacity mean fewer deliveries, reducing transportation costs and environmental impact. 3. Mobile Solutions For industries that require mobility, such as maritime, construction, and oil and gas, the 1000 litre IBC offers a portable, self-contained cleaning system. Mounted on trucks, ships, or platforms, it delivers powerful cleaning capabilities wherever you need them. Environmentally Responsible EnviroBlu’s water-based, non-toxic, phosphate-free formula is safe for both people and the planet. Certified food safe by the Canada Food Inspection Agency (CFIA) and recognized as a Green Marine Partner, EnviroBlu ensures that you meet the highest environmental standards while maintaining superior cleanliness. The EnviroBlu Advantage 1. Superior Cleaning Power EnviroBlu’s advanced formula delivers industrial-strength cleaning without compromising safety. From heavy machinery and equipment to large surface areas, it tackles the toughest grime efficiently. 2. Significant Cost Savings With the 1000 litre IBC, you reduce product usage, labor, and downtime. The high-capacity container minimizes the need for frequent refills and resupply, lowering operational costs. Our powerful formula ensures you use less product for maximum results, saving you money. 3. Versatility Across Applications EnviroBlu is ideal for a range of applications, from industrial and commercial to remote and mobile operations. Its versatility makes it an indispensable tool in various sectors, including: • Industrial: Continuous operations in manufacturing, processing plants, and heavy industry. • Remote Locations: Mining sites, oil rigs, and remote construction projects. • Mobile Solutions: Maritime, transportation, and emergency response units. Green Marine Partner: Advancing Environmental Excellence EnviroBlu is a proud Green Marine Partner, participating in North America's leading environmental certification program for maritime industries. This voluntary initiative helps participants improve their environmental performance beyond regulations, targeting key issues related to air, water, and soil quality. How to Use EnviroBlu For Continuous Operations: 1. Connect the IBC to your automated cleaning system. 2. Monitor and maintain levels to ensure uninterrupted cleaning. For Remote Locations: 1. Position the IBC in a central, accessible location. 2. Use as needed, ensuring regular checks to maintain supply. For Mobile Solutions: 1. Secure the IBC on your mobile platform. 2. Connect to your pressure washers or cleaning systems. Stay Green, Go Blu! Choose the 1000 litre IBC of EnviroBlu for your continuous cleaning operations, remote locations, and mobile solutions. Experience unparalleled efficiency, cost savings, and environmental stewardship with EnviroBlu. Together, we can build a cleaner, greener future.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Downhole Tools
Elevate Downhole Operations with HOCA Oil Tools' Shear Up External Fishing Neck Pulling Tools In the demanding environment of oil and gas extraction, operational efficiency and equipment reliability are paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance downhole operations. Our Shear Up External Fishing Neck Pulling Tools are designed to revolutionize the retrieval of downhole equipment, ensuring a seamless operation and enhancing well productivity. HOCA's Shear Up External Fishing Neck Pulling Tools: Engineered for Superior Performance Our Shear Up External Fishing Neck Pulling Tools are specifically engineered for the safe and efficient retrieval of downhole equipment featuring external fishing necks. These tools are indispensable for operators seeking to enhance operational efficiency and safety. Crafted with precision and built from high-grade materials, our Shear Up Pulling Tools are designed to withstand the harsh conditions of the downhole environment, ensuring reliability and durability in every operation. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to excellence and innovation in every product we offer. Our Shear Up External Fishing Neck Pulling Tools epitomize this commitment, providing operators with a reliable solution for the retrieval of downhole equipment. By integrating our tools into your downhole operations, you gain not just a product but a partner dedicated to enhancing your operational success. With HOCA Oil Tools, you can expect products that not only meet industry standards but exceed them, ensuring your operations run smoothly, safely, and efficiently. Our Shear Up Pulling Tools are a testament to our dedication to quality, performance, and customer satisfaction. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied customers who rely on our Shear Up External Fishing Neck Pulling Tools to elevate their downhole operations. Partner with us, and unlock the full potential of your downhole activities with tools designed for success. With HOCA Oil Tools, elevate your operational capabilities and embrace a future of enhanced efficiency, safety, and cost-effectiveness in downhole operations.
Buy
In Stock
Product & Service
New
API
Air Freight
Streamlining Well Maintenance: InWaTec Combined’s Mini-Coil Services for Well Cleanouts In the pursuit of operational excellence within the oil and gas industry, well maintenance stands as a critical routine to ensure continued productivity and longevity of wells. InWaTec Combined’s Mini-Coil Services are specifically tailored for well cleanouts, offering a highly effective solution for the removal of debris and buildup that can impact well performance. Optimized Fluid Delivery: Our Mini-Coil Tubing is expertly designed for the precise placement of cleanout fluids, delivering them directly to the areas of buildup. This targeted approach is key to dissolving or dislodging blockages and ensuring a thorough well cleanout process. High-Pressure Cleaning: One of the standout features of our Mini-Coil Tubing is its ability to operate under much higher pumping pressures compared to standard tubing. This is particularly advantageous during well cleanouts where higher pressures can be required to remove stubborn or compacted debris. Efficiency in Production Lifting: Post-cleanout, it's often necessary to facilitate the well's return to optimal production levels. The Mini-Coil Tubing not only excels in delivering cleanout fluids but also in lifting wells back into production, making the transition from maintenance to output both seamless and efficient. Navigating Limitations: While the Mini-Coil Tubing may have limitations in terms of flow rate and snubbing capabilities due to its smaller size, InWaTec Combined has honed the application of this technology to maximize its benefits. Our experts are adept at customizing operations to work within these parameters while still achieving exceptional results. At InWaTec Combined, we understand that time is a precious commodity in well operations. Our Mini-Coil Services for well cleanouts are designed to minimize downtime, ensuring that maintenance is carried out swiftly and effectively, reducing the impact on production schedules. Our commitment to delivering innovative solutions is reflected in our Mini-Coil Services. We not only provide the tools but also the strategic expertise to ensure that every cleanout operation is a success. With InWaTec Combined, operators can rest assured that their wells will be maintained with the highest level of precision and care. Choose InWaTec Combined for your well cleanout needs and benefit from our advanced Mini-Coil Services. We bring to your operations a blend of precision, power, and efficiency that ensures your wells remain clean, clear, and productive. Let us partner with you to maintain the heartbeat of your well operations, ensuring uninterrupted flow and optimal performance.
Service
In Stock
Service
New
API
Land Freight
Personal FX Services
Unlock Local Currency Access Anywhere with Dunbridge Financial's Personal Services Imagine traveling to a new country and seamlessly accessing the local currency as if you already had a local bank account. With Dunbridge Financial's Personal Services, this dream becomes a reality. We understand the importance of having local currency at your fingertips when you need it, and our innovative solutions are designed to make your financial experiences hassle-free and empowering. Access Local Currency Anywhere You Go Traveling to a new country is an adventure, but managing your finances in a foreign land can be a challenge. At Dunbridge Financial, we believe that you should have the freedom to access local currency effortlessly. Our Personal Services provide you with the tools you need to make your travel experiences smooth and enjoyable. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Empower Your Financial Freedom Don't let financial limitations hinder your travel experiences. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you need local currency while traveling or making international money transfers, we are here to make your financial journey a breeze. Empower your financial freedom with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Access local currency anywhere you go and embrace a world of limitless possibilities.
Service
Made to Order
Service
New
ISO
Air Freight
Intelligent Welding Machine
Discover the Power of Pulsed MIG Welding with the MIG Pulse/Multiprocess 202 At Canaweld, we pride ourselves on pushing the boundaries of welding technology to deliver cutting-edge solutions for the oil and gas industry. Our latest innovation, the MIG Pulse/Multiprocess 202, introduces the revolutionary Pulsed MIG welding method, taking your welding experience to new heights. The Magic of Pulsed MIG Welding Pulsed MIG welding is a non-contact transfer method that offers unparalleled precision and control. Unlike traditional methods, the electrode never touches the weld puddle. Instead, high-speed manipulation of the electrical output of the welding machine creates a pulsing effect that delivers consistent and flawless welds. This groundbreaking technology ensures minimal material distortion, making it ideal for welding thin stainless steel and aluminum sheets without compromising on quality. Intelligent, Portable, and Versatile The MIG Pulse/Multiprocess 202 is not your average welding machine. It is a powerful, portable, and intelligent unit designed to cater to a wide range of welding needs. With the ability to perform Pulsed MIG welding, Stick, and TIG welding with a lift start, this machine offers unrivaled versatility for your welding projects. Effortless Set-Up, Seamless Welding Thanks to the synergistic (self-balancing) welding parameters, the MIG Pulse/Multiprocess 202 provides a fast and accurate set-up every time. Welding thin stainless steel and aluminum sheets is a breeze with minimal material distortion, even at 0.030-inch (0.76 mm) or more. The unit can store up to 99 personalized welding programs, making it perfect for students or fast-paced production shops that require quick and efficient job settings. Intelligent Welding at Your Fingertips The MIG Pulse/Multiprocess 202 boasts digital control of welding parameters with synergic curves preset based on the material, gas, and wire diameter used. The built-in polarity changeover feature for most common gas and gasless wires enhances welding flexibility, while the smart "PROGRAM" key allows for quick program selection. With a high-grade metal dual drive roll system, precise and constant wire feed is guaranteed, preventing bird nesting and improving efficiency. Eco-Friendly and Efficient Our commitment to environmental responsibility is evident in the MIG Pulse/Multiprocess 202. The "Energy saving" function operates the power source cooling fan only when necessary, reducing energy consumption and ensuring sustainable welding practices. Top-Notch Features for Your Convenience We understand that your welding projects demand the best tools, which is why the MIG Pulse/Multiprocess 202 comes with a range of features to enhance your welding experience: • 8-inch (203 mm) Wire Spool Size with optional 12-inch (305 mm) compatibility for extended welding tasks. • Voltage Reduction Device (VRD) for added safety during operation. • Spool gun compatibility for trouble-free welding with aluminum. • A durable metal face panel that ensures longevity and protection. Your Investment is Protected We stand by the quality and reliability of our products, which is why the MIG Pulse/Multiprocess 202 comes with a comprehensive 3-year warranty. Your welding machine is protected, giving you peace of mind and confidence in your investment. Experience the Future of Welding Join the league of welding professionals who have embraced the power of Pulsed MIG welding with the MIG Pulse/Multiprocess 202 from Canaweld. Unlock the potential of your welding projects with cutting-edge technology and precision performance. Choose Canaweld for welding excellence. Invest in the MIG Pulse/Multiprocess 202, and elevate your welding capabilities to new heights. Experience the welding revolution today!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Electronic Pressure Gauge
When it comes to accurate and reliable pressure measurement in demanding environments, the HDI 2000P Pressure Gauge System stands out as the ultimate solution. With its intrinsically safe, certified, solid-state electronic gauge, the 2000P provides exceptional performance and readability, regardless of lighting conditions. Unparalleled Durability and Versatility: Designed to withstand high vibration and rugged environments, the HDI 2000P excels where indication at the point of measurement is crucial. Whether it serves as a primary or secondary readout, this gauge system delivers unmatched performance in a wide range of applications. Expanded Pressure Ranges and Certifications: With pressure ranges of up to 20,000 psi for ATEX/IECEX certification and 16,000 psi for CSA certification (with 20,000 psi coming soon in 2023), the HDI 2000P accommodates various operational requirements. Rest assured, all HDI pressure equipment is rated within an impressive accuracy of 0.50% of full scale, ensuring precise measurements every time. Field-Proven and Reliable: Built on HDI's 30-year field-proven platform, the 2000P has a solid reputation for reliability and durability. Having been in the field for over 10 years, this gauge system has consistently demonstrated its ability to provide safety, accuracy, reliability, and low maintenance, making it the trusted choice of industry professionals. Tailored Configurations to Suit Your Needs: The HDI 2000P can be customized to meet the unique requirements of your application. With configurations available such as 4-20mA output (additional barrier required), 0-1 volt output, and slave or secondary displays, you can optimize the system to align seamlessly with your operational setup. Key Benefits and Features: • Battery-powered for convenience and portability • Field repairable system, ensuring minimal downtime • Low battery indicator for uninterrupted operation • Wide pressure range options, from 30 psi to 20,000 psi (kPa or bar available upon request) • Impressive 10 psi resolution for precise measurements • Multiple connection types, including 2" 1502, 2" 2001/2202, or flanged connections • Flexible output options with 4-20mA or 0-1 volt available • Solid-state platform with no fluids or moving parts, ensuring long-term reliability • Analog bar graph with a divided scale for clear visualization • Consistent performance in high vibration environments, maintaining accuracy in any condition • Simple interface for easy calibration, reducing maintenance efforts Experience the HDI Advantage: When you choose the HDI 2000P Pressure Gauge System, you gain access to unparalleled accuracy, durability, and versatility. Our commitment to delivering superior products is matched only by our dedication to exceptional customer service. Contact our knowledgeable team today to discuss your specific application and explore how the HDI 2000P can revolutionize your pressure measurement needs. Trust HDI for unmatched performance in even the most challenging environments. Houston Digital Instruments - Where Reliability Meets Precision
Buy
In Stock
Manufacturer
New
API
Air Freight
Foreign Exchange For Investment Property
Unlock Financial Freedom with Dunbridge Financial's Personal Services Are you tired of hidden fees and complicated financial services that leave you feeling overwhelmed and uncertain about your money? Look no further! Dunbridge Financial is here to revolutionize the way you manage your personal finances. With our commitment to live rates, uncompromising security, and ease of use, we are your gateway to financial freedom. Live Rates with No Hidden Fees At Dunbridge Financial, we believe in complete transparency. What you see is what you get - no hidden fees, no surprises. Access our live exchange rates and take control of your money like never before. With us, you can rest assured that you're getting the most value out of every transaction. Security Is Our Priority Your financial well-being is of utmost importance to us. With Dunbridge Financial, your funds and data are in safe hands. We partner with payment service providers compliant with ISO27001, ensuring that your client funds are managed securely and with the utmost care. Enjoy peace of mind knowing that your financial interests are protected. Easy to Use, Easy to Save We believe that managing your money should be a breeze. That's why our personal financial service is designed with simplicity in mind. Sending money to over 100 countries is quick and effortless. Just choose your destination, lock in your rate, and you're done - it's as easy as that. Foreign Investment Management - Your Gateway to Global Opportunities At Dunbridge Financial, we go beyond simple money transfers. We offer a wide range of foreign investment management options, catering to your diverse financial needs. Here's how we can help you unlock global opportunities: 1. Manage Investments from Abroad: Handle your investments in your home country, even when you're residing abroad. Our platform empowers you to stay connected and make informed investment decisions regardless of your location. 2. Explore Offshore Investments: Diversify your investment portfolio with offshore opportunities. Our secure and compliant processes ensure that your international currencies are managed efficiently and effectively. 3. Pay Your Mortgage Abroad: Dreaming of a vacation villa or an investment property in another country? Dunbridge Financial makes it hassle-free to pay your mortgage in a different currency, turning your aspirations into reality. 4. Flexible Payment Options: Enjoy the flexibility of having your pay and expenses paid in your preferred currency. No more worries about currency fluctuations affecting your financial plans. Why Choose Dunbridge Financial? Dunbridge Financial is more than just a financial service provider. We are your trusted partner, dedicated to simplifying your financial journey and maximizing your opportunities. With us, you'll experience: • Cutting-edge technology for seamless financial transactions • Personalized support from our expert team, ensuring your needs are met • Secure and compliant processes for your peace of mind Join Us Today and Embrace Financial Freedom Discover the power of transparent, secure, and efficient financial services with Dunbridge Financial. Take control of your personal finances, explore global investment opportunities, and embrace a world of possibilities. Whether you're managing investments from abroad or making international money transfers, we are your reliable partner every step of the way. Unlock your financial freedom with Dunbridge Financial. Sign up today and experience a new era of financial empowerment.
Service
Made to Order
Service
New
ISO
Air Freight
Navigating Through the Intricacies of DCS Networks: Nulux's Unparalleled Expertise in Design, Planning, and Installation In the digitally dominated era where distributed control system (DCS) networks stand at the helm of operational efficiency and control, especially in the critical terrain of the oil and gas industry, Nulux Network Solutions etches its prowess in delivering bespoke, resilient, and high-performance network solutions. Your Strategic Partner in DCS Network Management With over two decades deep-diving into telecommunications and networking, Nulux has not just witnessed but actively shaped the evolution of industrial networks, especially when it comes to complex and crucial DCS network upgrades across the expanse of North America. Our hands-on experience spans from installing, maintaining, to strategic troubleshooting and upgrading multifaceted copper cabling systems, a testimony to our comprehensive mastery over the domain. At the heart of our operations reside resolute perfectionism and an unyielding commitment to optimal workmanship, which not only fills a significant industry void but also redefines the benchmark for telecom cabling providers. Your DCS Network, Crafted with Precision by Nulux Designing and Planning: Our seasoned team navigates through the complexity of your operational requirements, ensuring the DCS network is meticulously designed and planned, guaranteeing an unbroken chain of communication and control across your operational modules. Installation with Excellence: Employing our profound understanding of copper network potentials, our installation services assure you enjoy the robustness, reliability, and performance copper networks inherently bring – high-bandwidth transmission, easy termination, and dependable long-term functionality. An Expanse of Comprehensive Solutions: Nulux’s proficiency isn’t siloed into merely design and installation. Our offerings span from providing effective solutions for voice, data, video services, to crafting custom solutions that mirror your specific operational requisites. Moreover, we stand by you throughout your project’s lifecycle with unwavering technical support. Why Navigate the DCS Network Terrain with Nulux 1. Unwavering Quality: Nulux is synonymous with quality, backed by robust and high-performance networks that effortlessly manage operational data loads while ensuring cost-effectiveness and a remarkable degree of reliability and durability. 2. Tailored Solutions: Your operational needs are unique, and we honor that uniqueness by delivering customized DCS network solutions, ensuring that the system isn’t just installed but is an actual asset enhancing your operational efficiency and control. 3. A Partner, Not Just a Provider: Our understanding of networks transcends technical know-how, delving into recognizing what truly propels businesses towards competitiveness and operational excellence. 4. A Testament of Experience: Our past endeavors echo our expertise and commitment, having successfully executed numerous industrial projects, ensuring our clients' DCS networks are not mere communication channels but strategic assets propelling operational success. In the rugged and challenging operational landscapes of the oil and gas industry, let Nulux Network Solutions be your beacon, ensuring your DCS networks are not just infrastructural installations but strategic conduits amplifying your control, communication, and operational efficiency. Embark on a journey where your DCS networks become pivotal assets driving operational success and efficiency. Connect with Nulux Network Solutions today for an initial consultation and step into a future where your operations are seamlessly integrated, controlled, and perpetually propelled towards excellence.
Service
In Stock
Service
New
ISO
Downhole Tools
Transform Your Perforation Operations with HOCA Oil Tools' Mechanical Tubing Perforator In the competitive landscape of the oil and gas industry, achieving precise, efficient, and cost-effective downhole operations is crucial. At HOCA Oil Tools, we understand these challenges and are committed to providing state-of-the-art solutions. Our Mechanical Tubing Perforator stands out as a pinnacle of innovation, specifically designed to enhance the efficiency and accuracy of perforation operations. HOCA’s Mechanical Tubing Perforator: Engineering Precision for Downhole Success The Mechanical Tubing Perforator by HOCA Oil Tools is meticulously engineered to provide precise and efficient perforations in tubing, essential for effective production and injection operations. Crafted from robust materials and designed to withstand harsh downhole environments, our Mechanical Tubing Perforator ensures optimal performance and reliability, delivering clean, precise perforations that enhance fluid communication and well productivity. Experience the HOCA Advantage in Downhole Perforation At HOCA Oil Tools, we pride ourselves on advancing the field of downhole operations with innovative, reliable, and cost-effective solutions. Our Mechanical Tubing Perforator is a testament to this commitment, offering a level of precision, efficiency, and safety that sets new industry standards. Incorporating the HOCA Mechanical Tubing Perforator into your downhole operations signifies a move towards enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you not only acquire a tool; you gain a strategic partner dedicated to supporting your operational success with leading-edge solutions and comprehensive service. Choose HOCA Oil Tools' Mechanical Tubing Perforator for your downhole needs and join the ranks of industry leaders who trust our products to enhance their operations. Elevate your downhole operations with HOCA Oil Tools – where innovation, precision, and efficiency drive everything we do.
Buy
In Stock
Product & Service
New
API
Air Freight
Miner's Cap Lamp Charging Station
Secure and Streamline Your Equipment Charging with the CSA 120 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 120 Unit Locking FAST Charger Rack (Part # NWI-NWCR-120BLC), a robust and efficient charging solution designed for large-scale mining, construction, and industrial operations. This high-capacity charger rack combines rapid charging technology with enhanced security, making it an essential component for any operation looking to optimize equipment readiness and safety. High-Capacity Charging for Large Operations The CSA 120 Unit Charger Rack is tailor-made for operations that require fast and efficient charging of a large number of devices. With the capacity to charge 120 units simultaneously, it offers charging times of just 4 hours for the WISE LITE2 and 5 hours for LAMP3A/4A models. This impressive speed ensures that your equipment is always ready for use, minimizing downtime and maximizing productivity. Enhanced Security with Locking Feature One of the standout features of the CSA 120 Unit Charger Rack is its locking mechanism. This added layer of security is crucial for operations where equipment safety and prevention of unauthorized access are paramount. The locking feature ensures that your valuable equipment is protected during charging, providing peace of mind and enhanced safety in the workplace. Space-Efficient Design for Busy Workplaces Despite its large capacity, this charger rack is designed with space efficiency in mind. Its single-sided configuration allows for easy placement in equipment rooms, charging stations, or in areas where space is at a premium, ensuring a streamlined and organized charging setup. Built for Durability and Reliability Constructed to withstand the demanding environments typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures it can endure daily use, offering long-term, dependable performance. Ideal for Comprehensive Charging Management The CSA 120 Unit Locking FAST Charger Rack is an ideal solution for mining companies, construction firms, and rental equipment providers managing large fleets of devices. Its ability to securely charge a significant number of units quickly makes it a valuable tool for large teams and operations. Upgrade Your Charging Infrastructure Today Invest in the Wisdom CSA 120 Unit Locking FAST Charger Rack from Provix to enhance the efficiency and security of your charging processes. Visit www.provix.net to learn more about this advanced charging solution and discover our wide range of high-quality mining equipment.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Capacitor discharge stud welder
Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence!
Buy
In Stock
Manufacturer
New
ASME
Land Freight
Efficient Oil-Only Absorbent Socks: 3" Diameter, 4' Length for Targeted Liquid Containment
Oil-Only Absorbent Socks stand as versatile tools designed to efficiently contain and absorb oil-based spills. The use of polypropylene material in these socks adds an extra layer of effectiveness, ensuring quick and targeted spill cleanup. Crafted from polypropylene material, these socks possess the unique ability to swiftly soak up oil-based spills. The hydrophobic nature of polypropylene ensures that the socks focus exclusively on containing and absorbing oils, making them a reliable choice for various environments where oil spills may occur. The lightweight design of these socks is purposefully engineered for quick absorption while retaining water. This feature enhances the efficiency of cleanup operations, allowing the socks to rapidly absorb oil-based fluids while effectively preventing the spread of unwanted liquids. Technical Specifications: Understanding the OH-S34 Socks Part Number: OH-S34 Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.1 gallons. Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per Package: 11 gallons. Floating: Yes UV Resistant: No Size: 3” x 4 ft Filler Material: Polypropylene Filler Sock/Boom Profile: Round Flame Resistant: No Incinerable: Yes The use of Oil-Only Absorbent Socks, particularly the OH-S34 model, is recommended for those seeking an efficient and environmentally conscious solution for oil-based spills. Their polypropylene construction, mouldable design, and adaptability make them an asset in a variety of industries and spill response scenarios. Whether indoors or outdoors, these socks provide a reliable means to manage oil spills swiftly and effectively, contributing to a safer and cleaner environment. Oil-Only Absorbent Socks are used at Oil Refineries Within the oil and gas industry, refineries deal with large quantities of oil and other hydrocarbons. Oil-Only Absorbent Socks are instrumental in managing spills and leaks within refinery facilities, helping to maintain a clean and safe working environment. Oil-Only Absorbent Socks are used in transportation operations. Such as trucking or rail transport, can use Oil-Only Absorbent Socks as a precautionary measure and for quick response in the event of spills during transit. Oil-Only Absorbent Socks are used in construction sites. Construction sites often utilize heavy machinery and equipment that may experience oil leaks. Oil-Only Absorbent Socks can be deployed to quickly respond to and control oil spills, preventing environmental contamination on construction sites.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Integrating IoT Capabilities into the Oil and Gas Sector with Nulux Network Solutions In the perpetually evolving landscape of the oil and gas industry, the adoption and integration of Internet of Things (IoT) technologies have become pivotal in navigating through the complex, dynamic, and critical operational scenarios. Nulux Network Solutions, drawing from its extensive proficiency in wireless systems and infrastructure, proudly extends its specialization in IoT, ensuring that your operations are not merely efficient but are resonating with the rhythm of technological advancement. Why IoT in the Oil and Gas Industry? The infusion of IoT into the oil and gas sector amplifies operational intelligence, providing real-time data, optimizing processes, enhancing safety protocols, and significantly reducing operational costs. From remote monitoring, predictive maintenance, automated safety checks, to data-driven decision-making, IoT stands out as the bridge connecting the physical and digital realms of your operations. Nulux - Your Beacon into the IoT Universe Navigating through the intricate world of IoT, Nulux emerges as your ally, ensuring that your step into the IoT universe is stable, secure, and symbiotic with your operational dynamics. Our IoT Specialization encapsulates: Device Integration: Ensuring that sensors and devices are seamlessly integrated into your operations, capturing pivotal data points from every nook and corner of your processes. Data Analytics: Utilizing data harvested from various IoT devices, our systems facilitate astute analytics, enabling you to draw actionable insights, and thereby, enhancing operational decision-making. Security: In the IoT sphere where data is omnipresent, we enforce rigorous security protocols ensuring that every byte of information is shielded against potential cyber threats. Harnessing Nulux’s Wireless Prowess in IoT Implementation Implementing IoT is not just about embedding sensors; it's about ensuring that the data travels securely and reliably to where it's needed. Harnessing our profound expertise in wireless communication technologies, such as point-to-point and multipoint line configurations, we ensure that your IoT devices are not isolated islands but are communicatively interconnected, facilitating a continuous flow of data. Point to Point Configurations for Direct, Secure, and Reliable Data Transmission between two nodes, ensuring that critical data is transmitted securely and without loss. Multipoint Configurations enabling data transmission across multiple points, ensuring that your IoT network is expansively interconnected. Elevate Operational Intelligibility with Nulux IoT Imagine a world where your operational decisions are backed by real-time data, where predictive maintenance mitigates unplanned downtimes, and where your safety protocols are automated and perpetually vigilant. With Nulux's IoT specialization, this isn’t a distant dream but an achievable reality. Our solutions are meticulously crafted, considering the unique challenges and needs of the oil and gas sector, ensuring that your step into the world of IoT is not just progressive but is also coherent with your operational nature and future aspirations. Future-Proof Your Operations with Nulux Embark on a journey where every operational element is interlinked, every decision is data-driven, and every process is optimized through the intelligent, secure, and reliable integration of IoT into your operational fabric. With Nulux Network Solutions, step into a future where your operations are not just managed but are intelligently orchestrated, ensuring safety, efficiency, and a perennial evolution alongside technological advancements. Engage with Nulux, and let’s sculpt a future where your operations echo with intelligence, security, and unparalleled efficiency.
Service
In Stock
Service
New
ISO
Oil Spill Kit – 41 Gallon Drum
The Oil Only Absorbent Spill Kit - 41-Gallon contains, The 41-Gallon Oil Only Absorbent Spill Kit is a comprehensive solution for managing medium-sized spills in marine environments, refineries, and loading docks. Designed for versatility and effectiveness, the kit includes, 50 Absorbent Pads (8” x 11.5”) Versatile pads for quick and efficient absorption of oil-based liquids, ideal for various spill scenarios. 4 Sorbent Socks (3” x 4Ft) Specially designed to contain and absorb spills, particularly in confined or challenging areas. 8 Pillows (18” x 18”) Large pillows for absorbing and retaining significant quantities of oil, enhancing spill response efficiency. 1 Pair of Nitrile Gloves Essential personal protective equipment for safe handling during spill cleanup. 5 Disposal Bags Ensures proper containment and disposal of used absorbent materials, contributing to responsible waste management. 1 Gallon Drum (55) A larger containment option for collecting and managing absorbed liquids. Part Number: OH-OOS-41G The kit is specifically tailored for medium spills in marine environments, refineries, and loading docks, offering a comprehensive and efficient response to oil-based spills. Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
Downhole Tools
Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Kickover Tools In the highly specialized realm of oil and gas production, achieving operational precision and efficiency is critical. HOCA Oil Tools responds to this need with our superior line of Kickover Tools, specifically designed to enhance gas lift operations and optimize production rates. Our Kickover Tools are engineered to facilitate the precise installation and retrieval of side pocket mandrels and other downhole control devices, ensuring seamless well performance and maximizing production. HOCA's Kickover Tools: Engineered for Excellence HOCA Oil Tools' Kickover Tools are the epitome of innovation in downhole technology. Designed for compatibility with a range of wellbore sizes and specifications, our tools are crafted to offer unmatched precision, durability, and ease of use. Whether you are installing new equipment or retrieving existing devices, our Kickover Tools provide the reliability and efficiency needed for successful downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Kickover Tools means opting for a brand synonymous with quality, innovation, and reliability. Our commitment to excellence ensures that our products meet the high standards demanded by the oil and gas industry, providing our clients with the tools they need to succeed in their downhole operations. By integrating our Kickover Tools into your operational toolkit, you gain not just superior downhole equipment but also a strategic advantage in your production operations. With HOCA Oil Tools, you partner with a company dedicated to supporting your success with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Kickover Tools to enhance their operational efficiency and well performance. Partner with us, and harness the power of advanced downhole solutions designed for success. With HOCA Oil Tools, elevate your downhole operations with Kickover Tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Revolutionize Your Manufacturing with CNC Machine Leasing from CWB National Leasing Enhancing Precision and Productivity in Your Operations with Advanced Equipment Solutions For businesses in manufacturing, engineering, or fabrication, CNC (Computer Numerical Control) machines are pivotal for enhancing precision, efficiency, and versatility in production. Leasing CNC machines through Canadian Western Bank (CWB) National Leasing offers a strategic, adaptable, and financially astute solution for businesses seeking to upgrade their manufacturing capabilities. Here’s how leasing CNC machines can benefit your business: 1. Quick Access to State-of-the-Art Equipment CWB National Leasing values the pace of your business operations and offers a rapid leasing process. Decisions are typically made within 48 hours of your application, ensuring that your CNC machines can be delivered and operational quickly. This efficiency minimizes downtime and enhances your production capacity, allowing you to meet customer demands more effectively. 2. Increased Financial Flexibility Leasing CNC machines with CWB National Leasing boosts your financial power. It allows you to spread costs over periodic payments rather than making a significant upfront investment, freeing up capital for other vital business needs. The option to add extra features or accessories to your CNC machines for a small payment increase enables customization to meet specific production requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your CNC machines start contributing to your business’s revenue while still being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, which is key for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing CNC machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can impact your taxes.
Service
In Stock
Service
New
ISO
KEY360
KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.
Service
In Stock
Service
New
ISO
Enhance Your Fabrication Capabilities with Pipe Bender Leasing from CWB National Leasing Streamlining Your Operations with Cost-Effective and Flexible Equipment Solutions For businesses in the plumbing, HVAC, automotive, or construction industries, precision in pipe bending is crucial for efficient operations and quality workmanship. Leasing pipe benders through Canadian Western Bank (CWB) National Leasing offers a flexible, cost-effective, and practical solution for businesses seeking to enhance their pipe fabrication capabilities. Here’s how leasing pipe benders can benefit your business: 1. Rapid Access to Advanced Fabrication Equipment CWB National Leasing understands the importance of having the right tools for your trade. They offer a quick leasing process, with decisions typically made within 48 hours of your application. This ensures that your pipe benders can be delivered and operational swiftly, enhancing your production efficiency and reducing downtime. 2. Increased Financial Flexibility Leasing pipe benders with CWB National Leasing boosts your buying power. It allows you to spread costs over manageable periodic payments rather than a significant initial purchase, freeing up capital for other vital business operations. The option to add extra features or accessories to your pipe benders for a small payment increase enables customization to meet specific project requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your pipe benders start contributing to your business’s revenue while they're being paid off. This balanced approach helps maintain a healthy expense-to-revenue ratio, essential for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing pipe benders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Choosing to lease pipe benders through CWB National Leasing is a strategic decision that equips your business with essential fabrication equipment while maintaining financial flexibility. It ensures access to high-quality pipe benders, vital for precise and efficient pipe fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved project quality, and increased profitability, helping your business to excel in its respective industry.
Service
In Stock
Service
New
ISO
WR-SCSSSV Bigbore 7 inch
The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
Downhole Tools
Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry.
Buy
In Stock
Product & Service
New
API
Air Freight
Water Injection Valve
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Air Freight
EDC Coiled Tubing Tool
Introducing the Revolutionary EDC (External Dimple Connector) from Marlin Oil Tools: The Essential Link for Coiled Tubing Applications in the Oil and Gas Industry Marlin Oil Tools proudly presents our state-of-the-art EDC (External Dimple Connector), a groundbreaking solution designed to seamlessly integrate the smooth lower end of coiled tubing (CT) with any requisite downhole tool for efficient well intervention operations. The EDC stands out in the oil and gas sector for its innovative design and unparalleled reliability, making it a must-have for your well intervention toolkit. Key Features of the EDC (External Dimple Connector): Seamless Integration: The EDC provides a flawless connection between the smooth-walled end of the CT and the threaded interface of downhole tools, ensuring a secure and efficient link for well intervention jobs. Advanced Connection Mechanism: Equipped with a unique holes matrix in the upper housing, the EDC utilizes set screws installed in precision-pressed dimples, offering a robust and reliable connection without compromising the integrity of the coiled tubing. Threaded Lower Part: The connector's lower portion features a meticulously designed thread for attaching any downhole tool, facilitating a versatile and adaptable solution for various well intervention needs. High-Performance Sealing: Installation of the EDC is enhanced with two O-rings made from the durable FKM 90 material, providing a high-integrity seal between the internal space of the connector and the annulus, ensuring operational safety and efficiency. Effortless Installation: The EDC can be effortlessly installed using a dimple tool, capable of mechanical or hydraulic pressing, simplifying the assembly process and minimizing downtime during critical operations. At Marlin Oil Tools, we understand the complexities and challenges of well intervention in the oil and gas industry. Our EDC (External Dimple Connector) is designed to address these challenges, offering a reliable, efficient, and high-quality connection solution for coiled tubing operations. Whether you are conducting routine maintenance, stimulation, or any other well intervention job, the EDC ensures a seamless, secure, and effective operation. Why Choose Marlin Oil Tools' EDC? Unmatched Reliability: Engineered for durability and performance, the EDC withstands the harsh conditions of downhole operations, ensuring reliability when it matters most. Versatility: Compatible with a wide range of downhole tools, the EDC offers unparalleled flexibility for your well intervention needs. Quality Assurance: At Marlin Oil Tools, quality is at the forefront of everything we do. The EDC is manufactured to the highest industry standards, ensuring peak performance and safety. Elevate your coiled tubing operations with the EDC (External Dimple Connector) from Marlin Oil Tools. Contact us today to learn more about how our innovative solutions can enhance your well intervention strategies and drive operational success.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Elevate Your Business Ambiance with Coffee Machine Leasing from CWB National Leasing Brewing Success with Advanced and Cost-Effective Beverage Solutions For businesses in the hospitality sector, offices, or any setting where offering a quality coffee experience is essential, having a top-notch coffee machine can significantly enhance customer satisfaction and employee morale. Leasing coffee machines through Canadian Western Bank (CWB) National Leasing presents a flexible, economical, and practical solution for businesses looking to upgrade their beverage services. Here’s how leasing coffee machines can benefit your business: 1. Swift Access to High-Quality Coffee Machines CWB National Leasing values the importance of enhancing your business ambiance and offers a rapid leasing process. With decisions typically made within 48 hours of application submission, your coffee machines can be delivered and operational quickly. This efficiency means you can start offering premium coffee experiences without significant delay, enhancing your customer service and workplace environment. 2. Enhanced Financial Power Leasing coffee machines with CWB National Leasing boosts your financial flexibility. It allows you to spread costs over manageable periodic payments rather than making a large upfront investment, freeing up capital for other key business needs. The option to add extra features or accessories to your coffee machines for a small payment increase allows for customization to meet your specific service requirements. 3. Effective Cash Flow Management Manageable lease payments over the term mean your coffee machines start contributing to your business’s ambiance and productivity while being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business growth and financial stability. 4. Customizable Payment Plans CWB National Leasing offers a variety of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s revenue cycle. This flexibility is particularly beneficial for businesses with variable or seasonal income, ensuring that payments are practical and fit your financial situation. 5. Potential Tax Benefits Leasing coffee machines can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to understand how leasing can optimize your business’s tax position. Conclusion Opting to lease coffee machines through CWB National Leasing is a strategic decision that equips your business with essential beverage equipment while maintaining financial agility. It ensures access to state-of-the-art coffee machines, vital for delivering high-quality coffee experiences, without the financial burden of a large upfront investment. This leasing approach enables enhanced customer satisfaction, improved employee well-being, and increased overall appeal of your business setting.
Service
In Stock
Service
New
ISO
Wireline Services
InWaTec Combined: Pinpoint Precision with Tubing End Locator Services Accuracy is the cornerstone of successful well intervention and maintenance operations, and InWaTec Combined’s Tubing End Locator (TEL) running services exemplify this precision. Our TEL services provide clients with the certainty needed for depth correlation and critical downhole positioning, ensuring that all subsequent interventions are executed with pinpoint accuracy. The Crucial Role of the Tubing End Locator The TEL is an invaluable tool in the oil and gas industry’s arsenal, designed to accurately locate the end of the tubing string. This precise location is essential for depth correlation during various well servicing operations. InWaTec Combined's TEL services ensure that your team has the exact measurements necessary for efficient and effective intervention planning. Preparation for Precision Before deploying the TEL, it's crucial to ensure the tubing is clear of any debris that could obstruct the locator. InWaTec Combined’s preparatory procedures, which include running a gauge cutter or bailer, are meticulous steps that guarantee the TEL can smoothly navigate to and through the end of the tubing. This thorough clearing is part of our commitment to precision – we ensure that when the TEL is deployed, it operates in an unimpeded environment. Adaptable and Versatile Tooling Our TELs are equipped with a spring-loaded finger, enabling them to be run in various tubing sizes, ranging from 2-3/8? to 5-1/2?. This adaptability makes InWaTec Combined’s TEL services universally applicable, providing versatility without compromising on the accuracy of the tool. Whatever the tubing size, our TEL services can be tailored to meet the specific needs of the operation. Streamlining Operations with Accurate Measurements The accuracy provided by our TEL services streamlines subsequent operations by providing a reliable reference point. This eliminates guesswork, reduces the risk of error, and enhances the efficiency of operations such as setting packers, plugs, or perforating at precise depths. InWaTec Combined’s Promise of Excellence At InWaTec Combined, we understand the impact that accurate depth measurements can have on the success of well operations. Our TEL running services are a reflection of our promise to deliver excellence in every aspect of our work. We provide not just a service, but a partnership that enhances and ensures the precision of your well servicing tasks. Conclusion: Your Partner in Depth Correlation In conclusion, InWaTec Combined’s Tubing End Locator services are crucial for any operation that demands exact depth measurements. With our state-of-the-art tools and meticulous preparation, we ensure that every intervention is carried out with the confidence that comes from knowing the exact parameters of your well. Partner with InWaTec Combined, where precision is not just a metric; it's a mission.
Rental
In Stock
Product
New
API
Land Freight
Anti-Pollution Workover Unit
Are you looking for a game-changing solution that can revolutionize your oil and gas operations? Look no further than the Lean Environmental Services System (LESS) unit, the innovative mobile system designed to minimize pollution, risks, costs, and time during well service operations. The LESS unit is specifically designed to support and assist various well service operations such as electric line, slickline, and coiled tubing. By preventing any fluid or gas releases during these operations, the LESS unit can eliminate risks to people and the environment. The unit stores all the fluids into its tanks, reducing the risk of spills and leaks that can lead to costly cleanup operations and environmental damage. In addition to reducing risks and pollution, the LESS unit can significantly reduce costs and time associated with well service operations. With its efficient design and advanced technology, the unit can streamline operations and enhance productivity, resulting in faster job completion and higher efficiency. But that's not all - the LESS unit also offers the possibility to re-inject fluids into the well at the end of the job, further reducing environmental impact and promoting responsible resource management. With its sustainable features and advanced technology, the LESS unit is a powerful tool for companies looking to improve their environmental performance and reduce their carbon footprint. Don't miss out on the opportunity to revolutionize your operations with the Lean Environmental Services System (LESS) unit. Contact us today to learn more about how this innovative mobile system can benefit your business and help you achieve your sustainability goals.
Rental
In Stock
Product & Service
New
API
Land Freight
Structured Cabling by Nulux Network Solutions: The Bedrock of Your Resilient Network Infrastructure in the Oil and Gas Industry In the intricate and unrelenting realm of the oil and gas industry, the backbone of successful, uninterrupted operations rests on a sturdy network infrastructure. Not merely a conduit for communication, but a veritable lifeline that ensures every unit, every device, and every system communicates seamlessly, securing the continuous flow of vital data across every echelon of your business. This is where Nulux Network Solutions champions your endeavors through our unparalleled expertise in Structured Cabling. Nulux Network Solutions: Your Harbor in the Tempest of Network Demands Your venture into the industrious domains of energy extraction and refinement is formidable, laden with challenges that demand a network just as robust and reliable as the spirited teams operating within. Nulux, with a lauded heritage of over two decades, curates tailored copper cabling networks, ensuring that your network infrastructure stands unwavering amidst operational rigors. While our specialization permeates various strands of telecommunications and networking, structured cabling, particularly utilizing copper, becomes a focal point for businesses that demand: High-Bandwidth Transmission: Facilitating transmissions up to 10 Gbps, ensuring your data flows unrestrained. Reliability: A steadfast performance, ensuring your operations are never hampered by network downtimes. Cost-Effectiveness: A pragmatic solution that assures optimal performance without burdening operational costs. Copper Cabling by Nulux: The Confluence of Flexibility, Durability, and Affordability Structured cabling, particularly utilizing copper, furnishes your business with a network that is not just remarkably flexible, easily terminated, and reliable, but also phenomenally durable, ensuring that the infrastructure remains unfazed amidst the most demanding operational scenarios. Nulux enhances this inherent virtue of copper cabling by ensuring: Holistic Network Solutions: From the embryonic stages of design and planning to installation and life cycle support. Upgrades & Evolution: Ensuring your network is never obsolete, perpetually evolving in tandem with technological advancements. Tailored Solutions: Customizing solutions that cater explicitly to your voice, data, and video service requirements, ensuring no aspect of your operations is ever compromised. Immerse Your Operations in a Cocoon of Network Security and Reliability Navigating through the complexities of DCS network upgrades and deploying copper cabling systems, encompassing telephone, ethernet, coax, and hybrid networks, Nulux has not just crafted but meticulously refined our approach towards network solution delivery. Our commitment towards delivering high-quality, high-performance networks at affordable rates has been unwavering and resolute. Steer Your Business Towards Operational Excellence with Nulux Your business, deeply embedded in the vital sectors of energy, seeks more than just a service provider. It seeks a partner that comprehends the profundity of operational demands and curates solutions that are not merely effective but exemplary. Nulux Network Solutions invites you to experience a partnership where your network demands are met with solutions that are not merely about connectivity but about ensuring your operational pulse never falters. Reach out to us today, and let’s architect a network that becomes the silent, steadfast guardian of your operations, ensuring every bit of data traverses with reliability, every communication occurs seamlessly, and your business thrives amidst the operational challenges of the energy sector.
Service
In Stock
Service
New
ISO
Guarding the Pulse of Your Operations with Nulux’s Network Maintenance Services Navigating through the unyielding terrain of the Oil and Gas industry demands not merely a communication network that is robust but one that stands unassailable against the test of time and operational strain. For professionals who engineer the vitality of our energy sector, ensuring that every node, every link, and every byte of data pulsates without falter through your networks is paramount. Herein lays the essence of Nulux Network Solutions’ pristine Network Maintenance services. Catalyzing Sustainability through Robust Network Health With a relentless devotion to facilitating an unobstructed flow of products, solutions, and services across the complete energy value chain, Nulux is unwaveringly committed to escorting our customers on the voyage towards a future where sustainability and operational excellence coalesce seamlessly. In the domain of Fiber Optic communication, where the tiniest of signal attenuations can cascade into significant operational impediments, maintaining the unyielding health of your network becomes imperative. And this is where our Network Maintenance services shine, illuminating your operations with the assurance of unbroken, reliable connectivity. Embracing Nulux’s Network Maintenance: A Fortification of Reliability Aligning with Nulux’s Network Maintenance services infuses your operations with: Proactive Safeguarding: Our technical mavens, with a fine-tuned acumen honed by over two decades in the industry, provide proactive monitoring and mitigation strategies, ensuring that potential issues are neutralized before they can reverberate through your operations. 24/7 Vigilance: In an industry where every second is critical, our 24/7 monitoring and support stand as your unwavering sentinel, ensuring that come what may, your network's integrity remains unassailable. Bespoke Maintenance Protocols: Our network maintenance solutions are not generic but are meticulously tailored to resonate with the specificities of your operations, ensuring that our maintenance protocols echo with the unique requirements of your network architecture. Minimized Downtime: With an arsenal of cutting-edge diagnostic tools and an experienced team that specializes in rapid response and resolution, we ensure that any potential downtimes are not merely addressed but are minimized to a negligible whisper. Embarking on an Uninterrupted Operational Journey with Nulux At Nulux Network Solutions, our network maintenance services go beyond mere problem resolution; we dive into the very fabric of your communication networks, ensuring that every fiber, every connection, and every data transmission is enveloped in a cocoon of reliability and unyielding operational excellence. In an industry where data transmission is as vital as the energy being harnessed, Nulux stands as your partner, ensuring that the pulse of your operations, your communication networks, perpetually remain vibrant, secure, and impeccable. Choose Nulux, and navigate through your operational journey with the assurance that the lifelines of your communication are not merely maintained but are guarded, fortified, and optimized, ensuring every operational heartbeat is steady, uninterrupted, and perpetually resilient.
Service
In Stock
Service
New
ISO
Spill Kit, inclusive: absorbent pads, pillows, socks, disposal bags, nitrile gloves
The spill kit contains, 5 Oil-Only Absorbent Pads, 3 Oil-Only Absorbent Pillows, 2 Oil-Only Absorbent Socks (3"x4'), Disposal bags, Nitrile gloves. This spill kit for effective and efficient cleanup and containment of oil-based spills in various settings. The kit, equipped with Oil-Only Absorbent Pads, Pillows, Socks, disposal bags, and Nitrile gloves, provides a comprehensive solution for managing and addressing oil spills. It can be particularly useful in industrial facilities, storage areas, transportation operations, or any environment where oil-based liquids are handled. The spill kit has a total absorption capacity, capable of soaking up 15 liters (3.87 gallons) of liquid. This means that oil-based spills, the combined capabilities of the Oil-Only Absorbent Pads, Pillows, and Socks within the kit allow for the containment and absorption of up to 15 liters of spilled liquids. This substantial capacity ensures that the spill kit is well-equipped to handle moderate to sizable spills, making it a reliable and effective solution for various industrial and environmental settings. Oil-Only Absorbent Pads Oil-Only Absorbent Pads are highly effective for the rapid cleanup of oil-based spills. Made from polypropylene material, these pads are specifically engineered to selectively absorb oils while repelling water. The pads boast a fine-fiber construction, allowing for quick absorption and retention of oil-based liquids. With a size of 12” x 12”, these pads are versatile and can be used in various settings, including industrial facilities, automotive workshops, and marine environments. Oil-Only Absorbent Pillows Oil-Only Absorbent Pillows are strategically deployed on oil-based spills for rapid absorption. Their polypropylene construction ensures targeted cleanup, selectively absorbing oils while repelling water. These pillows contribute to the efficiency and environmental responsibility of spill response in workplaces where oil-based liquids are handled. Oil-Only Absorbent Socks (3"x4') Oil-Only Absorbent Socks are placed to create a barrier, containing, and preventing the spread of oil-based spills. It allows to adapt to different surfaces, ensuring efficient and targeted spill response. These socks are integral components of spill kits and are valuable in various industries where oil-based liquids are handled. Usage of Disposal bags Disposal bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met oil-based spills. Nitrile gloves Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. Applications: • Integral part of spill kits • Used in industrial facilities, and areas handling oil-based liquids.
Buy
In Stock
Manufacturer
New
ASME
Air Freight
EnviroBlu Cleaner and Degreaser
Re-Inventing Industrial Cleaning with EnviroBlu: The Ultimate Solution for Equipment and Large Areas In the high-speed, high-stakes world of industry, efficiency and cost-effectiveness aren't just goals—they're necessities. Enter Mekapisk EnviroBlu Solutions Inc. and our 20-litre EnviroBlu cleaning solution. Specifically engineered for cleaning equipment and expansive areas, this product delivers exceptional power while staying true to our commitment to environmental sustainability. Why EnviroBlu is a Game-Changer At EnviroBlu, we're not just committed to safe cleaning; we're redefining it. Our water-based, non-toxic, phosphate-free formula ensures rapid, reliable cleaning without compromising the planet. Here's how our 20-litre EnviroBlu can revolutionize your cleaning routine: 1. Unmatched Cleaning Efficiency EnviroBlu’s advanced aqueous surfactant technology dives deep, penetrating dirt and grime at the molecular level. Whether you're tackling industrial machinery, large equipment, or sprawling floor spaces, EnviroBlu gets the job done faster and more efficiently, saving you precious time. 2. Significant Cost Savings With EnviroBlu, cleaning time and product usage are drastically reduced. Our potent formula means you use less to achieve more, leading to substantial cost savings. The 20-litre size is perfect for bigger cleaning tasks, ensuring you have ample supply for extensive use. 3. Environmentally Friendly Our unwavering commitment to sustainability is infused into every bottle of EnviroBlu. The water-based, non-toxic, and phosphate-free formula means you can clean confidently, knowing you're protecting the environment. Maintain a safe, eco-friendly workspace while adhering to the highest environmental standards. 4. Versatile and Reliable EnviroBlu is your all-in-one solution for various applications, from heavy-duty equipment cleaning to large-scale maintenance. Its versatility makes it indispensable in industrial, commercial, and even residential settings. Whatever the task, EnviroBlu delivers consistent, reliable results. 5. Certified Safe for Various Uses EnviroBlu is certified food safe by the Canada Food Inspection Agency (CFIA) and is a recognized Green Marine Partner. This ensures our product is safe across diverse environments, including food processing areas and maritime industries, meeting stringent safety standards. 6. Easy to Use Our 20-litre EnviroBlu product comes with straightforward instructions for both small and large cleaning tasks. Whether using a power washer or manual methods, EnviroBlu's efficiency makes the process hassle-free and effective. Directions for Use Smaller, Less Soiled Areas: 1. Mix water with EnviroBlu as per the required dilution ratio. 2. Spray the mixed solution directly on the surface. 3. Wipe the area with a dry cloth. Larger, Heavily Soiled Areas (Without Power Washer): 1. Pre-rinse the affected area with water. 2. Spray EnviroBlu directly on the target area and let it work for 1-3 minutes. 3. Brush the area if necessary. 4. Rinse thoroughly with water. 5. Repeat if the area has not been cleaned recently. Larger, Heavily Soiled Areas (With Power Washer): 1. Spray the area with a water jet only. 2. Introduce EnviroBlu into the power washer. 3. Rinse with straight water. Dilution Ratios 100% • Cleaning heavy machinery and equipment • Cleaning oil spills from most surfaces, including asphalt • Degreasing engines and concrete floors 75% • Flushing out impurities from pipes and radiators • Preparing surfaces for primer and paint in metal applications • Cleaning wheels, tires, ovens, and grills 50% • Cleaning interiors of vehicles and aircraft • Cleaning fiberglass boats, swimming pools, and food processing equipment • Cleaning carpets, upholstery, and kitchen appliances 25% • Cleaning leather, vinyl, and painted walls Stay Green, Go Blu! Opt for the 20-litre EnviroBlu for your equipment and large area cleaning needs. Our powerful, eco-friendly formula ensures exceptional results while saving you time and money. Embrace a cleaner, greener future with EnviroBlu.
Buy
In Stock
Manufacturer
New
ISO
Land Freight
Water Injection Valve
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
Made to Order
Product
New
API
Sea Freight
Restraint Training
Empowering Your Team with Installer Training and Certification At Safe-T-Whip & Restraints Inc., safety is at the heart of everything we do. We believe that a well-trained and qualified workforce is the cornerstone of a safe and successful oilfield operation. That's why we offer comprehensive On-Site Qualified Installer Training and Certification programs to ensure that your team is equipped with the knowledge and skills they need to handle our safety restraints with confidence. Comprehensive Training, Complete Confidence: Our training program covers all the essential aspects of Safe-T-Whip usage, maintenance, and safety procedures. We leave no stone unturned, ensuring that your team is well-versed in all the critical elements of working with our safety restraints. Topics Covered: During our training sessions, your team will learn about: • Proper use of Safe-T-Whip restraints to ensure maximum safety and effectiveness. • Tags and identification for easy recognition and compliance with safety protocols. • Inspection techniques to identify any potential issues or concerns. • Proper installation and use of anchor points for secure and reliable restraint. • Maintenance and cleaning procedures to keep the restraints in optimal condition. • Leak repair measures to address any unforeseen incidents promptly. • Annual inspection practices to maintain the highest safety standards over time. Certified for Success: After completing our comprehensive training program, your team members will receive certification, recognizing their proficiency and qualification as Safe-T-Whip installers. This certification is a testament to their commitment to safety excellence and adherence to industry best practices. On-Site Convenience: We understand that your operations may have specific needs and challenges. That's why we bring the training directly to your site, ensuring convenience and relevance for your team. Our expert trainers will work with your personnel, addressing site-specific concerns and scenarios to ensure practical application of the training. Safety First, Always: With Safe-T-Whip Installer Training and Certification, you can be confident that your team is prepared to prioritize safety in every aspect of their work. From installation and inspection to maintenance and repair, our training equips your team with the expertise they need to create a safer work environment for everyone. Choose Safe-T-Whip & Restraints Inc. for top-notch safety solutions and industry-leading training. Contact us today to schedule your On-Site Qualified Installer Training and Certification and take the first step towards a safer, more secure oilfield operation. Together, we build a safer future for the industry.
Service
Made to Order
Service
New
API
Air Freight
FBS Coiled Tubing Tool
Introducing the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools: The Optimal Solution for Coiled Tubing Stability in Oil and Gas Well Interventions Marlin Oil Tools proudly presents the FBS (Fixed Blade Stabilizer), a cutting-edge downhole tool meticulously designed to enhance the stability and efficiency of well intervention operations. As part of the borehole assembly (BHA), the FBS plays a crucial role in centering the BHA relative to the well's axis, ensuring optimal performance during critical interventions, especially in wells with significant inclination or when coiled tubing (CT) exhibits residual bending. Here’s why the FBS is an indispensable tool for your operations. Key Features of the FBS (Fixed Blade Stabilizer): Precision Centering: Engineered to center the BHA within the well, the FBS ensures that tools like mills or perforators operate effectively at the heart of the wellbore, crucial for tasks requiring precise positioning such as milling or perforation. Versatile Application: Ideal for use in wells with various inclinations, up to 90 degrees, where the BHA tends to lie against the well wall, the FBS provides the necessary support to maintain the BHA in the optimal position. Enhanced Stability: By preventing the eccentric location of the CT BHA within the well, the FBS significantly reduces the risk of operational issues, ensuring smoother, more efficient well interventions. Robust Design: The fixed blades of the FBS are designed to withstand the harsh downhole conditions, offering durability and reliability throughout the operation. Elevate your well intervention strategies with the FBS (Fixed Blade Stabilizer) from Marlin Oil Tools, a premier downhole tool designed for maximum BHA stability and efficiency in oil and gas operations. The FBS excels in centering the BHA relative to the well's axis, ensuring accurate positioning for milling, perforation, and other precision-dependent tasks. With its ability to accommodate wells of up to 90 degrees inclination and correct CT BHA eccentricity, the FBS is your solution for enhancing operational effectiveness and reducing risks in challenging well conditions. Choose the FBS for unparalleled support and stability in your coiled tubing operations. Why Choose the FBS from Marlin Oil Tools? Optimized Well Intervention: Improves the accuracy and efficiency of milling and perforation tasks by centering the BHA. Adaptable to Various Well Inclinations: Provides consistent performance in wells with up to 90 degrees of inclination. Reliable Stability: Reduces operational complications by preventing the CT BHA from lying eccentrically in the well. Durable Construction: Built to endure the rigors of downhole environments, ensuring longevity and reliability. The FBS (Fixed Blade Stabilizer) by Marlin Oil Tools represents the forefront of downhole stabilization technology, ensuring that your well intervention operations are performed with the highest level of precision and efficiency. Incorporate the FBS into your coiled tubing operations to achieve optimal outcomes in well stability and intervention success.
Buy
Made to Order
Manufacturer
New
API
Land Freight
Software Development
Elevate Power Management with DAKAR: The Future of Energy Efficiency At ELEKS, we're committed to revolutionizing the energy industry with innovative software solutions that empower businesses to thrive in the digital age. Introducing DAKAR, our cutting-edge power management system designed to enhance operational efficiency, minimize errors, and transform the way energy is managed. DAKAR has become the preferred choice for numerous European energy producers, distributors, utilities providers, design organizations, and educational institutions, and for good reason. Unleash the Power of DAKAR Seamless Integration: DAKAR seamlessly integrates into any power industry organization, ensuring a smooth transition to advanced power management solutions without disrupting your existing workflows. Comprehensive Capabilities: Experience extensive capabilities for utilities network management, modeling, and planning. DAKAR empowers you to optimize your power networks, ensuring they operate at peak efficiency while adapting to both traditional and renewable energy sources. Enhanced Accuracy and Reliability: With DAKAR by your side, you can elevate the accuracy and reliability of your power systems. Our software empowers you to make informed decisions based on real-time data, leading to reduced errors and improved performance. Real Results, Real Numbers Impressive Customer Base: With a track record of success, DAKAR is trusted by 250 customers across diverse industries. From energy suppliers to educational institutions, businesses worldwide rely on DAKAR for streamlined power management. Leading Ukrainian Energy Suppliers: In Ukraine, where the energy landscape is evolving rapidly, DAKAR stands out as the software of choice for 2/3 of energy suppliers. Its impact on efficiency and productivity is undeniable. 40% Productivity Growth: Businesses using DAKAR have experienced a remarkable 40% growth in productivity. This tangible result speaks volumes about the transformative power of our software in enhancing operational efficiency. ELEKS: Pioneering Energy Innovation For over three decades, ELEKS has been at the forefront of technology and innovation, creating solutions that drive industries forward. DAKAR embodies our commitment to shaping the energy industry for the better, providing unparalleled tools to manage power systems with accuracy and precision. Experience the Future of Power Management Embrace the future of power management with DAKAR by ELEKS. Join the ranks of satisfied customers who have unlocked efficiency, minimized errors, and achieved remarkable growth. Elevate your operational efficiency and take control of your energy systems like never before. With DAKAR, the future is bright, sustainable, and powered by cutting-edge technology.
Service
In Stock
Product & Service
New
ISO
Corded Miner's Cap Lamp
Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations.
Buy
In Stock
Manufacturer
New
ANSI
Air Freight
Unlock Business Success with Leased Telephone Systems from CWB National Leasing Are you ready to take your business to the next level, boost efficiency, and increase your profits? Look no further because CWB National Leasing is your trusted partner when it comes to leasing telephone systems. Here's why choosing us is the smart move for business owners like you: Get Your Equipment Fast In today's fast-paced business world, time is of the essence. At CWB National Leasing, we understand the need for speed, and we've streamlined our process to be lightning-fast. When you apply for a telephone system lease, you won't be kept waiting. In fact, we take pride in delivering rapid decisions on your lease application. Just how fast are we? Typically, we'll notify your chosen equipment dealer that payment is on its way within a mere 48 hours of your approval. So, while you focus on running your business, you can trust us to handle the logistics, ensuring your telephone equipment is delivered promptly. For more details on our approval turnaround times, take a look! Increase Your Buying Power Your buying power is a valuable asset, and we're here to help you maximize it. Instead of making a substantial upfront purchase, consider the advantages of periodic lease payments offered by CWB National Leasing. By opting for leasing, you can free up critical cash resources that can be invested in other essential areas of your business. But that's not all—we go a step further by allowing you to add extra features or accessories to your telephone equipment for a minor payment increase. Yes, that's right; we put the "POW" in Buying Power, giving you the flexibility to customize your equipment to meet your unique needs. Control Your Cash Flow Effective cash flow management is crucial for any successful business. When you lease telephone systems with CWB National Leasing, you gain a powerful tool for achieving this control. Our lease agreements are structured to ensure small and manageable payments throughout the lease term. What does this mean for you? It means that as you pay off your telephone equipment, it will begin generating revenue for your business. This approach makes it easy to strike the right balance between expenses and revenue, putting you in control of your financial success. Seasonal Payment Options At CWB National Leasing, we understand that businesses often experience seasonal variations in revenue. We are all about flexibility, and our leasing solutions are designed to adapt to your unique financial cycles. Whether you prefer payments on a seasonal, semi-annual, or annual basis, we can structure your lease to align seamlessly with your revenue patterns. With CWB National Leasing, your telephone system lease will always be convenient and tailored to your specific needs. Potential Tax Savings Leasing telephone systems through CWB National Leasing isn't just financially prudent; it can also offer potential tax benefits for your business. In many instances, leasing allows you to expense lease payments, providing income tax advantages rather than dealing with the depreciation of equipment capital costs. To fully understand how leasing can optimize your business's tax position, we recommend consulting your tax advisor. Their expertise will help you navigate the tax advantages of leasing telephone systems with confidence. In conclusion, leasing telephone systems with CWB National Leasing is the strategic choice for business owners who are serious about success. From lightning-fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business. Don't miss the opportunity to supercharge your business; choose CWB National Leasing for all your telephone system leasing needs today!
Service
In Stock
Service
New
ISO
Rutland 1200 Terrain Windcharger
Rutland 1200 Turbine Features Unique Tri-Namic Aerofoil Blades The refined aerofoil blade profile is purpose designed for quietness, low windspeed start up and high wind peak aerodynamic performance. Each injection moulded blade is identical and perfectly balanced for smooth operation. Unrivalled power generation of 250W at 10m/s (23mph/37kmph) and peak power of 483W @ 15m/s. Our efficient, finely profiled Tri-namic blades ensure that the Rutland 1200 converts the maximum energy available in the wind to charge your batteries. Elegant and Aerodynamically Styled The sculpted nose and nacelle efficiently direct the flow of air leading to the built-in tail fin which directs the rotor to the prevailing wind. Our Build Quality The Rutland 1200 Turbine sets the standard for micro wind turbines in both performance and reliability. At our manufacturing facility in Corby, UK we use high grade materials to create a robust, high quality and long lasting turbine. Distinctive blue hard anodized marine grade aluminium, modern and lightweight UV stable injection mouldings and stainless steel components and fasteners perform in temperatures experienced from the Arctic to the equator. Available in 12V 24V & 48V versions. Generator The Rutland 1200T generator is based on Marlec’s pioneering disk type design. Its low resistance AC operation combines the latest powerful rare earth type magnets with a 3-phase winding and low friction bearings. This is housed in a protective aluminium casing and all manufactured by Marlec in the UK. *features from manufacturers literature
Buy
Made to Order
New
ANSI
Sea Freight
Software Development
Empowering Energy Excellence: Harnessing Digital Twin Technology with ELEKS In the dynamic landscape of the energy sector, innovation is the catalyst for success. ELEKS stands at the forefront of this innovation wave, armed with the power of highly innovative digital twin technology. Imagine a world where you can not only visualize your assets but also simulate their behavior accurately across various scenarios, predicting and optimizing their performance. This is the realm where our engineering prowess shines, crafting software solutions that seamlessly integrate advanced digital twin technology with the prowess of IoT and machine learning. Welcome to a future where data becomes insight, insight becomes action, and your energy operations transcend the ordinary. The Power of Digital Twin Technology: Your Pathway to Excellence Asset Visualization and Simulation: ELEKS' digital twin technology allows you to visualize your assets in unprecedented detail and simulate their behavior across a spectrum of conditions. This empowers you to foresee potential challenges and optimize performance proactively. Data Integration: Our engineers craft software solutions that bring together advanced digital twin software, IoT, and machine learning capabilities. This combination enables you to capture data from various sources, creating a comprehensive and interconnected view of your energy landscape. Real-time Tracking: Track energy usage, operational conditions, and KPIs in real time. ELEKS' solutions ensure that you're not just collecting data – you're gaining actionable insights that drive informed decision-making. Predictive Analytics: Take your energy management to a new dimension by feeding your data to machine learning models. Predictive analytics become your tool for demand response (DR) management, energy optimization, and risk mitigation. Demand Response (DR) Management: With predictive insights at your fingertips, DR management becomes more efficient and targeted. Respond dynamically to fluctuations in energy demand, ensuring optimal resource allocation. Energy Management Reinvented: Leverage predictive analytics to optimize your energy management strategies. Allocate resources intelligently, reduce waste, and enhance your overall efficiency. Risk Management Made Smarter: Digital twin technology, IoT, and machine learning converge to provide you with comprehensive risk insights. Identify potential risks before they escalate, safeguarding your operations and minimizing disruptions. Elevate Your Energy Operations with ELEKS At ELEKS, we don't just create software – we empower transformation. Our energy sector technology expertise doesn't just offer solutions; it unlocks new horizons of efficiency, accuracy, and innovation. The convergence of digital twin technology, IoT, and machine learning elevates your energy landscape to a realm of unparalleled insight and foresight. Join us in shaping the future of energy, where data becomes the foundation of intelligent decisions, and innovation paves the way for success. With ELEKS, you're not just embracing technology – you're embracing transformation. Step into a world where digital twin technology becomes your compass, guiding you towards operational excellence and a sustainable energy future.
Service
Made to Order
Service
New
ISO
WI Water Injection Valve
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.
Buy
In Stock
Product