Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Equalizing Sub-Assembly

HOCA Oil Tools: Innovating Efficiency with State-of-the-Art Equalizing Subs In the ever-evolving landscape of the oil and gas industry, the need for precision and efficiency in downhole operations is paramount. At HOCA Oil Tools, we recognize this imperative and respond with our innovative Equalizing Subs. These tools are specifically designed to enhance the operational capabilities of sub-surface controls like Locking Mandrels and Tubing Mandrels, ensuring seamless and efficient downhole activities. HOCA’s Equalizing Subs: Engineered for Unmatched Performance Our Equalizing Subs are crafted to facilitate the equalization of pressure differentials across Sub-Surface Controls, crucial for the safe and effective retrieval of these components. Available in various types, including 'ROTB', 'ROTF', 'ROTC', 'ROTD', and others, each is designed to meet distinct downhole conditions and operational needs, ensuring versatility across different well environments. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools' Equalizing Subs means selecting a solution backed by innovation, quality, and unwavering support. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether addressing standard operations or facing unique downhole challenges, our Equalizing Subs provide the reliability and performance essential for today's downhole activities. Incorporating our Equalizing Subs into your operational toolkit is a step towards enhanced efficiency, safety, and success. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations. Partner with us to harness the power of advanced downhole solutions designed for the modern oilfield landscape. With HOCA Oil Tools, empower your downhole operations with tools that redefine efficiency, reliability, and performance in the oil and gas industry. View Details

Liquified Natural Gas (LNG) Transport and Supply

Lovat Gas Solutions: Your Dependable Partner for LNG Supply When it comes to LNG supply, Lovat Gas Solutions has a proven track record of delivering, no matter the conditions or location. We understand that your business relies on the uninterrupted availability of natural gas, whether you are an industrial user or a utility. That's why we are here to provide you with peace of mind, allowing you to focus on your core business while we take care of your gas supply needs. Our commitment to excellence means that we go above and beyond to ensure the dependability of our LNG supply. We have a deep understanding of the unique challenges and requirements of different industries, and our experienced team is well-equipped to develop a solution that caters to your organization's specific needs. At Lovat Gas Solutions, we offer flexible options for LNG supply to accommodate your business requirements. Whether you need a short-term supply to cover temporary spikes in demand, a long-term solution to support your ongoing operations, or a reliable backup supply to safeguard against unforeseen disruptions, we have you covered. By partnering with us, you can expect: 1. Reliability: We have a proven track record of delivering LNG supply, regardless of the conditions or location. Our robust infrastructure and logistical expertise ensure that your business receives a consistent and dependable supply of natural gas. 2. Expertise: With years of experience in the industry, our team possesses extensive knowledge and understanding of LNG supply. We stay up-to-date with the latest advancements and industry trends to provide you with the best possible solutions. 3. Customized Solutions: We recognize that each organization has unique needs. Our team will work closely with you to understand your specific requirements and develop a tailored LNG supply solution that aligns with your business goals. 4. Peace of Mind: When you partner with Lovat Gas Solutions, you can have peace of mind knowing that your gas supply needs are in capable hands. Our reliable and responsive service ensures that you can focus on your business without worrying about interruptions in your natural gas supply. Don't let the uncertainties of LNG supply hinder your business operations. Contact Lovat Gas Solutions today, and let us develop a dependable short-term, long-term, or backup supply of natural gas that suits your organization's needs. Trust us to deliver, no matter the conditions or location, so you can keep your business running smoothly and efficiently. Get in touch with us now to explore how we can support your gas supply requirements and help your business thrive. View Details

Wireline Entry Guide

A wireline entry guide is a device that is used to guide a wireline into a wellbore or oil and gas well. It is used to direct the wireline into the wellbore in a controlled manner. View Details

Reliant WL Packer

The WL™packer is a new wireline-set, retrievable, high-performance production packer, run in combination with the L-10 on/off tool. The WL can be run as a temporary bridge plug by installing a blanking plug in the L-10 seal nipple, above the packer. This enables remedial or stimulation work above the packer. The plug can then be removed with conventional wireline methods, allowing production of the well to be resumed. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

FXE Wireline Retrievable SCSSSV 5 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

5-1/2 inch Wireline Retrievable FXE SCSSV

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

10 3/4" Mech-2 Double Grip Mechanical Set Packer

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

FH Hydrostatic Retrievable Packer

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

Snubbing

Enhancing Snubbing Operations: InWaTec Combined’s High-Pressure Mini-Coil Services At InWaTec Combined, we understand the critical nature of snubbing operations in well intervention and maintenance. Our Mini-Coil Tubing services are specifically designed to enhance these operations, providing a solution that balances the delicate requirements of fluid placement and well lifting with the necessity for high-pressure performance. Optimal Fluid Placement: The Mini-Coil Tubing is adept at delivering small quantities of fluids precisely where they are needed. This precise placement is particularly beneficial during snubbing operations, where control and accuracy are paramount to successful well control and intervention. Efficient Well Lifting: When it comes to lifting wells into production, especially during snubbing operations, our Mini-Coil Tubing shines with its ability to handle high pumping pressures. This capability ensures that wells are brought into production efficiently and reliably. High-Pressure Operations: While Mini-Coil Tubing may face limitations in flow rate and mechanical snubbing force due to its smaller size, it compensates with an exceptional capacity for withstanding higher pumping pressures. This makes it particularly useful in situations where pressure integrity is crucial. The nature of snubbing operations often involves dealing with wells under pressure. The high-pressure resistance of our Mini-Coil Tubing means it can be deployed in environments that are too challenging for larger, conventional coiled tubing. This feature opens up new possibilities for conducting critical well interventions safely and effectively. InWaTec Combined's Mini-Coil Services are not just about providing equipment; they're about delivering a comprehensive solution. We understand that each well and operation has its unique set of challenges. Our Mini-Coil Tubing services are complemented by a team of experienced professionals who ensure that every operation is executed with precision, efficiency, and adherence to the highest safety standards. Customized Solutions: Recognizing the unique demands of each operation, InWaTec Combined offers customized Mini-Coil solutions. We work closely with clients to understand their specific needs and challenges, ensuring our Mini-Coil Tubing services are tailored to meet the particular requirements of their snubbing operations. Choose InWaTec Combined for your snubbing operation needs, and benefit from the advanced performance of our Mini-Coil Tubing services. Our commitment to innovation, safety, and operational excellence ensures your operations are not just maintained but enhanced. Let us help you achieve your well intervention goals with our high-pressure, precision-driven Mini-Coil services. View Details

HDI 1522 Choke Position Indicator System

The HDI 1522 Choke Position Indicator System is an electronic instrument designed to accurately measure and display the position of choke valves used in oil and gas production. Choke valves regulate the flow of oil, gas, or water from wells by adjusting the degree of restriction in the pipeline, which directly affects pressure control and production rates. The 1522 system provides highly precise position readings in one percent increments, ranging from fully closed (0%) to fully open (100%), enabling better management of well performance and enhanced safety.

This system uses solid-state electronics to convert mechanical valve movement into electronic signals via various potentiometer types—including linear, rotary, and retractable options—making it adaptable to a wide variety of choke valve designs and configurations. The position data is presented on a four-inch liquid crystal display that combines a numeric readout with a linear bar graph, allowing clear and immediate visualization of the choke’s exact position. The display is engineered for visibility from distances up to fifteen feet, suitable for typical field environments.

Powered by an internal, field-replaceable battery with approximately one year of continuous operation, the 1522 system minimizes maintenance requirements and eliminates the need for complex wiring. It also offers optional analog output signals, such as 4-20 mA or 0-1 V, enabling seamless integration with plant control systems, programmable logic controllers, data acquisition systems, or remote display units for centralized monitoring and automation.

The enclosure is constructed from UV-stabilized, impact-resistant polycarbonate and PBT alloy materials to ensure durability in harsh outdoor conditions. It is rated to operate reliably within a wide temperature range from -40°F to 176°F (-40°C to 80°C). The internal electronics are protected by a gasket seal to prevent dust and moisture ingress, maintaining performance and longevity.

Installation flexibility is enhanced through support for cable lengths up to 1,500 feet, allowing the gauge to be mounted in the most accessible or secure locations. Multiple sensor housing options and connector orientations simplify field installation and reduce the need for onsite customization, helping to minimize downtime and installation costs.

The 1522 Choke Position Indicator System delivers accurate, real-time choke valve position information in a robust, easy-to-install package. Its reliable performance, flexible integration capabilities, and low maintenance design support improved flow control, safer operations, and optimized production.

View Details

MLE Clamp for ESP's

Water Injection Safety Valve Type MC 5-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

BMS Liquid Stopper

BMS Liquid Stopper: The Innovative Solution for Safe and Eco-Friendly Workover Activities If you're looking for a reliable and eco-friendly solution for your workover activities, look no further than Clearstream's BMS Liquid Stopper. Our innovative product acts as a semi-solid plug that allows workover activities without impairing the formation, all while being completely biodegradable. Traditionally, workover activities involve the use of cement or other materials to create a plug in the wellbore. However, these materials can be harmful to the formation. BMS Liquid Stopper solves this problem by providing a safe and eco-friendly alternative. Our product is specially designed to create a semi-solid plug that can be easily removed once the workover activities are complete. This allows for a more efficient and effective workover process, without harming the environment or impairing the formation. In addition to its effectiveness and eco-friendliness, BMS Liquid Stopper is also biodegradable. This means that it breaks down naturally over time, without leaving any harmful residue in the environment. This makes it the perfect solution for companies that are committed to environmental sustainability. At Cleanstream, we take great pride in our commitment to quality, safety, and environmental responsibility. Our liquid stopper is rigorously tested to ensure that it meets the highest standards of quality and effectiveness. And with its biodegradable properties, you can rest assured that you are using a product that is safe for both your business and the environment. Don't settle for traditional materials that can harm the environment and impair the formation. Choose BMS Liquid Stopper for safe, efficient, and eco-friendly workover activities. Contact us today to learn more about how our innovative product can benefit your business. View Details

Hardhat Clip Mount

Secure Your Lighting with Wisdom's NWI-NS-HMC4 Hard Hat Clip Mount – Now Available at Provix Provix is excited to introduce the Wisdom NWI-NS-HMC4 Hard Hat Clip Mount, a practical and robust accessory designed for miners and construction workers. This clip mount is an essential tool for anyone who requires reliable and secure mounting of lighting equipment on their hard hats. Effortless Installation and Strong Adhesion The NWI-NS-HMC4 Hard Hat Clip Mount is equipped with 3M adhesive, known for its strong bonding capabilities. This ensures a secure attachment to any hard hat, providing a stable and sturdy base for mounting mining lamps or other light sources. The ease of installation allows users to quickly set up their equipment without the need for additional tools or complicated procedures. Designed for Durability and Compatibility Crafted with high-quality materials, the Wisdom Hard Hat Clip Mount is built to withstand the tough conditions often encountered in mining and construction environments. Its robust design ensures that it can hold up against daily wear and tear, making it a reliable accessory for any professional. Versatile and Convenient This clip mount is not only durable but also versatile. It is designed to be compatible with a wide range of headlamps and mining lamps, making it a universal solution for various lighting needs. Its compact size and lightweight nature ensure that it doesn’t add bulk or weight to the hard hat, maintaining comfort for the user. Enhance Your Safety and Efficiency The NWI-NS-HMC4 Hard Hat Clip Mount enhances safety by ensuring that your headlamp stays securely in place, providing consistent illumination without the risk of it falling or shifting. This stability is crucial for efficient and safe working conditions, especially in low-light environments. Get Yours Today Upgrade your safety gear with the Wisdom NWI-NS-HMC4 Hard Hat Clip Mount from Provix. Visit our website at www.provix.net to learn more about this essential accessory and explore our range of mining and construction equipment. Secure your lighting and enhance your work safety and efficiency with Wisdom's reliable products. View Details

ESP Disassembly Bench

Are you in need of a high-quality disassembly bench for the teardown and inspection of electric submersible pumps? Look no further than Sivam! We're proud to offer a range of disassembly benches that are specifically designed for the inspection and maintenance of ESP's. Our benches are built from the highest quality materials and are engineered to provide exceptional durability and reliability, ensuring that your team can work safely and efficiently. At Sivam, we understand the importance of precision and accuracy when it comes to maintaining critical equipment like ESP's. That's why our disassembly benches are designed to provide a stable and secure platform for teardown and inspection, with features like adjustable height for a level working surface to ensure maximum convenience and ease of use. But that's not all - our disassembly benches also come equipped with a range of additional features to help your team work more efficiently. From built-in cages to customizable work surfaces, our benches are designed with your team's needs in mind. At Sivam, we're committed to providing our customers with the highest level of quality and customer service. That's why we work closely with our clients to understand their specific needs and design benches that meet their exact specifications. So if you're in need of a high-quality disassembly bench for the inspection and maintenance of ESP's, choose Sivam. Contact us today to learn more about our products and services and to find out how we can help take your operations to the next level! View Details

2.5″ Butterfly Bleed Air Valve

The 2.5″ Butterfly Bleed Air Valve is a critical component in the LM2500 gas turbine, responsible for regulating the flow of bleed air—compressed air extracted from the turbine’s compressor stage. This valve helps control internal pressures and temperatures, which is essential to maintain safe and efficient turbine operation.

The valve has an effective flow area of 2.5 square inches, allowing it to manage airflow precisely in smaller turbine setups or space-restricted environments. Its butterfly-shaped disc is permanently attached to the shaft, which ensures consistent movement and reliable control of air flow with minimal play or slippage.

One important feature is its fast response time—less than 320 milliseconds to complete a full open or close stroke. This quick action enables the turbine control system to rapidly adjust pressure levels, preventing overheating and reducing mechanical stress on turbine components.

The valve’s bearing shaft is robustly designed to handle frequent small movements, known as dither cycles, without premature wear. The bearings themselves are specifically engineered to support these high-cycle conditions, improving the valve’s durability and lifespan.

By efficiently managing bleed air, this valve helps protect the turbine from excessive pressure build-up and thermal stress, which can otherwise lead to damage or reduced efficiency. Its design also allows installation without requiring changes to the turbine’s hydraulic or electrical systems, making it suitable for retrofits or upgrades on existing LM2500 turbines.

In summary, the 2.5″ Butterfly Bleed Air Valve plays a vital role in controlling compressor bleed air in LM2500 turbines, balancing safety, performance, and durability within compact or smaller turbine applications.

View Details

Multiprocess 201 SLM

Field Operators

Trusted Field Operators: The Heart of Lovat Gas Solutions At Lovat Gas Solutions, our success is built upon the expertise and dedication of our field operators. With over 80 years of combined experience, our team draws upon their vast knowledge to deliver exceptional service. From assisting gas utilities during pipeline outages to executing complex flare gas capture projects, our field operators are at the forefront of making it all happen. What sets our field operators apart? 1. Extensive Experience: Our team of field operators possesses a wealth of experience gained through their involvement in various gas-related projects. Whether it's managing pipeline outages or executing flare gas capture initiatives, they have the expertise to handle diverse challenges with precision and efficiency. 2. Compressed and Cryogenic Gases Expertise: We specialize in compressed gases and liquefied cryogenic gases. Our field operators have undergone rigorous in-house training, equipping them with the necessary skills to handle these gases safely and efficiently. You can trust them to deliver gas wherever it's needed, ensuring a seamless supply for your operations. 3. Safety-Focused Approach: Safety is paramount in everything we do. Our field operators receive comprehensive safety training to ensure compliance with industry standards and best practices. They are well-prepared to support your operations on short notice, providing a reliable and safe service that you can depend on. 4. Nationwide Reach: With experience spanning from the north to the south and east to west of Canada, Lovat Gas Solutions has established a strong presence across the country. Our field operators are well-versed in the unique requirements of different regions, allowing us to provide comprehensive support to clients nationwide. When you choose Lovat Gas Solutions, you gain access to a team of field operators who are dedicated to delivering excellence. With their expertise, commitment to safety, and nationwide reach, they are ready to support your mobile gas needs. Contact a Lovat Gas Solutions expert today to discuss how our skilled field operators can assist you. Whether you require gas supply, project execution, or emergency support, trust our team to deliver reliable solutions that drive the success of your operations. Experience the difference of working with field operators who are the heart of Lovat Gas Solutions. View Details

WI Valve for injection wells (3.39 inch)

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

OilHungry oil absorbent big pad

Oil absorbent pads are designed to selectively absorb oil-based liquids while repelling water. They are commonly used in various industries, including automotive, marine, and manufacturing, to clean up and control oil spills or leaks. These pads are crucial for preventing environmental contamination and ensuring workplace safety. The size of oil absorbent pads can vary, and this specific product, Oil Absorbent big pad 22" x 23", is designed with dimensions of 22 inches by 23 inches. This size is suitable for addressing larger spills or leaks. It works very well and easy, when oil leaks occur, simply place the absorbent pad in the affected area to efficiently clean up and contain the spilled oil. And After use, follow proper disposal guidelines, on the packaging. The primary purpose of OilHungry Oil Absorbent pad is to effectively clean up oil spills. Whether it's a minor leak or a more substantial oil spill in an engine, the absorbent pad is designed to capture and contain the oil, preventing it from spreading further. Leaking oil can happen with every boat or vessel. And oil leaks pose a significant threat to the environment. The absorbent pad helps mitigate this threat by quickly and efficiently absorbing the leaked oil. This proactive approach protects water bodies, preventing the oil from contaminating rivers, lakes, or oceans. Having an Oil Absorbent big pad (22" x 23) is a valuable tool to address and solve challenges related to leaks in engines. the absorbent pad offers a targeted and effective solution for managing oil spills in various industrial and marine settings. Having the Oil Absorbent big pad prepared in your boat, is the same as having a plan for unexpected leaks. View Details

2” Tubing End Locator

The 2” Tubing End Locator is a mechanical downhole tool used to determine the physical end of production tubing during well intervention or maintenance activities. It is a critical component in operations where it is necessary to confirm tubing length or avoid tool deployment beyond the tubing’s bottom, such as during setting packers, logging, or fishing operations.

In a typical well setup, production tubing does not always terminate at a predictable or recorded depth. The tubing end locator provides a reliable way to identify the true end of the tubing string by using a spring-loaded finger mechanism that reacts upon reaching the tubing’s bottom. This reaction is detectable at the surface, providing the operator with a clear and immediate indication without relying solely on depth readings or assumptions.

This specific model is intended for tubing sizes ranging from 2" to 2-1/2" outer diameter. It is designed with a maximum tool O.D. of 1.750", which ensures clearance inside the tubing, and includes a 1.375" fishing neck, a standardized feature that allows the tool to be retrieved if necessary using conventional pulling tools.

Threading is provided on both ends for integration into tool strings: a 15/16 - 10 UN pin connection on top and a 1 - 11.1/2 NPT box connection at the bottom. This allows the locator to be run inline with other mechanical or wireline-conveyed tools. These standard thread forms ensure compatibility with widely used downhole equipment and deployment systems.

Constructed from high-strength alloy steel, the tool is designed to withstand the mechanical stress, temperature variations, and chemical exposure typical in oil and gas well environments. While not a pressure-control device, its materials and design are selected to perform reliably under downhole pressure conditions encountered during standard intervention work.

The 2” Tubing End Locator provides a mechanical means of depth verification that does not rely on electronics, sensors, or depth counters. It is a simple, durable, and effective tool for reducing uncertainty and improving operational safety in the wellbore.

View Details

Check Valve Poppet Type – Female x Female 1/4" NPT – 6000 PSI – ISO 9001

In oil and gas systems, controlling the direction of fluid flow is critical to protect pipelines, pumps, and equipment. The 1/4" poppet type check valve with female × female NPT connections provides reliable uni-directional flow, preventing backflow and maintaining system integrity. Its compact size makes it ideal for small diameter lines, instrumentation, sampling, and control applications, while the female × female connections allow secure inline installation without additional fittings.

The valve has a standard working pressure of 6000 PSI, with optional configurations rated up to 10000 PSI. Selectable cracking pressures from 1/3 to 25 PSI allow precise adaptation to system requirements. It is available in corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability guarantees quality and material verification, and additional testing, including vibration, temperature, and helium, is available for applications requiring maximum reliability.

View Details

WR-SCSSSV 7 inch FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Crew Transport using modern buses worldwide

Crew Transport buses for long term charter in locations around the world where reliable transportation is critical. Getting the crew to and from the job site in safety and comfort is key to a good start and end to the workday. Custom crew bus solutions available and every project is unique so please contact us to work together to find an optimum solution on crew transport. View Details

S-KWIK Control Line and Cable Protector

Bigbore 7 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

Ambient Valve 3 1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Monoflange SBB Double Block & Bleed Valve – Flange x Thread – Ball Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange Single Body Double Block and Bleed Valve combines two isolation points and a vent in a single compact body, providing safe and reliable isolation in oil and gas and process systems. It features a ball isolation mechanism for leak-proof shut-off and a needle drain to safely vent the cavity between the isolation points. This design is particularly suitable for instrument or gauge isolation, chemical injection, sampling, and piping interface applications, where compact size and reduced leak paths are critical.

It's monoflange construction reduces weight, footprint, and the number of potential leak points compared to traditional multi-valve assemblies. The valve accommodates sizes from 1/2” to 2” and pressure classes from 150 to 2500, with both reduced and full bore options to suit different process requirements.

Manufactured from high-quality materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can be supplied with NACE-compliant materials for corrosive environments. All units are designed, tested, and certified in accordance with EEMUA 182, API 6D, ISO 17292, and ASME B16.34 standards and are factory tested to ensure reliable dual isolation and controlled cavity venting.

View Details

Onshore Electric Line Services

Revolutionizing Wellbore Diagnostics with InWaTec Combined's Onshore E-Line Services In the world of oil and gas exploration and production, knowledge is power—and power lies in the data. At InWaTec Combined, we understand that the foundation of effective well servicing is the precision and reliability of information obtained from deep within the Earth. That's where our Onshore Electric Line (E-Line) services come into play, a game-changer in the realm of wellbore diagnostics. An E-Line is, in essence, an electric cable capable of performing extraordinary tasks. Lowered into the wellbore, this lifeline serves as a crucial conduit between the heart of the well and the watchful eyes of our engineers. Its primary function is to transmit data regarding wellbore conditions, a task it performs with exceptional efficiency and accuracy. The brilliance of the E-Line service lies in its simplicity and its capability. As it descends through the geological layers, the e-line gathers critical data through logging activities, painting a clear and comprehensive picture of the well's status. This information is not just data; it is a narrative of the well's health, productivity, and potential. Our E-Line services are not merely about data collection; they are about enabling informed decision-making that can lead to enhanced production efficiency, increased safety, and minimized environmental impact. With precise information, interventions can be smarter, quicker, and more effective, leading to a significant reduction in downtime and operational costs. InWaTec Combined's commitment to excellence in E-Line services is unwavering. We invest in cutting-edge technology and the continuous training of our specialists to ensure that our clients receive the most reliable and advanced diagnostic services available. We're not just service providers; we're partners in your quest to unlock the full potential of your assets. In a sector where every decision counts, InWaTec Combined's Onshore Electric Line services stand as your assurance of precision, reliability, and insight. Let us illuminate the depths of your wellbore with data that drives success. View Details

Subsea Templates Fabricated and Installed

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Marine Oil Only Absorbent Spill Kit 4.6-gallon Bag

The absorbent spill kit 4.6-gallon bag contains, 5 Pads 8’ x 11.5” 1 Sorbent Sock 3” x 4ft 1 Bilge 1 Pair Nitrile Gloves 1 Disposal Bag Part number: OH-OOS-BO Use for small spills inside boats and near boat launches. Using an Oil Only Absorbent Spill Kit in a 4.6-gallon bag highly recommended for marine environments. It ensures that you are equipped to address oil spills swiftly and effectively, protecting the marine environment and complying with regulations. 5 Pads 8’ x 11.5” This package includes five absorbent pads, each measuring 8 feet by 11.5 inches. These pads are made for effective liquid cleanup, offering versatility and practicality. These pads are suitable for quick and efficient absorption of liquids, including oils and hydrocarbons. Their compact size and absorbent properties make them an ideal solution for managing spills in diverse industrial, automotive, and emergency response scenarios. 1 Sorbent Sock 3” x 4ft This package comprises a single Sorbent Sock, measuring 3 inches in diameter and 4 feet in length. The sock is made for efficient containment and absorption of liquid spills, particularly oil-based substances. Its mouldable and adaptable nature allows it to conform to different surfaces, making it versatile for diverse spill response applications. Whether used as a standalone solution or as part of a spill kit, this Sorbent Sock provides a targeted and effective response to spills. 1 Bilge A specific component designed for managing bilge water in a marine setting. The bilge component includes absorbent materials tailored for addressing water contaminated with oil or other hydrocarbons in a boat's bilge. This ensures a comprehensive solution for various spill scenarios that might occur on a boat. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 1 Disposal Bag Includes 1 Disposal Bag, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bag is employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. The absorbent spill kit in a 4.6-gallon bag is a complete package for marine use as it incorporates a range of components designed to address spills effectively and safely, whether they involve oil, fuel, or bilge water, ensuring a comprehensive and responsible spill response on boats and ships. View Details

Stud Welder CAD 81

Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence! View Details

HP-3 Hydraulic Set High Angle 6 5/8" 28-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Wire Brush for Slickline

Achieve Superior Wellbore Cleanliness with HOCA Oil Tools' Wire Brush In the demanding realm of oil and gas extraction, the cleanliness and integrity of wellbores are paramount for operational success. Recognizing this critical need, HOCA Oil Tools has developed a premier solution: the Wire Brush, an essential component of our comprehensive downhole slick line tools portfolio. Designed to tackle the toughest wellbore contaminants, our Wire Brush is engineered for excellence, ensuring your operations maintain peak efficiency and safety. HOCA's Wire Brush: Pioneering Downhole Cleanliness At HOCA Oil Tools, we understand that every downhole environment poses unique challenges. That's why our Wire Brush is meticulously crafted to remove deposits, scale, and other obstructions with unmatched efficiency. Constructed from durable materials capable of withstanding harsh downhole conditions, the HOCA Wire Brush is your ally in maintaining wellbore integrity and optimizing production flow. Elevating Downhole Maintenance with HOCA Oil Tools Innovation, quality, and customer satisfaction are at the core of HOCA Oil Tools' mission. Our Wire Brush exemplifies these values, providing a solution that not only meets but exceeds the demands of modern downhole operations. With the HOCA Wire Brush, operators can expect a level of cleanliness and efficiency that sets new industry standards. Adopting the HOCA Wire Brush into your downhole cleaning regimen is an investment in your operation's future. It signifies a commitment to operational excellence, safety, and cost-effectiveness. Our dedicated team at HOCA Oil Tools is committed to supporting your success by providing superior downhole solutions that address the specific challenges of the oil and gas industry. Embrace the future of downhole maintenance with HOCA Oil Tools’ Wire Brush – your solution for maintaining pristine wellbores and maximizing operational outcomes. Experience the difference that comes with using tools crafted for excellence and backed by an unwavering commitment to your operational success. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Wire Brush to keep their operations running smoothly, safely, and efficiently. View Details

7" Mech-2 Double Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

CSA 60 unit, Locking FAST charger rack

Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment. View Details

Bailer Sampling

InWaTec Combined: Streamlining Wellbore Clarity with Premier Sample Bailer Services In the ever-evolving landscape of drilling and production, the importance of maintaining a clean wellbore is paramount. At InWaTec Combined, we understand that the efficiency of your operations hinges on the clarity of the wellbore. That's why we offer comprehensive Sample Bailer running services, designed to support operations on drilling rigs, during workover operations, and in production wells, whether onshore or offshore. Optimizing Wellbore Integrity with Bailing Operations Bailing operations are a critical component of wellbore maintenance, aimed at collecting solids and cleaning the wellbore to ensure uninterrupted operations. InWaTec Combined's Sample Bailer services are tailored to meet the needs of any operation, providing a thorough cleansing of the wellbore and collection of solids that could otherwise impede production or damage equipment. Adaptable Services for Diverse Environments Whether it's the dynamic environment of offshore rigs or the structured demands of onshore wells, InWaTec Combined's Sample Bailer services are adaptable to any setting. Our equipment and expertise are suited to the unique challenges presented by both drilling and production phases, ensuring that we provide optimal solutions regardless of the environment. Leveraging Technology for Efficient Operations At InWaTec Combined, we utilize the latest technology in our Sample Bailer running services. This approach allows us to efficiently collect wellbore debris and samples, minimizing downtime and maximizing the productivity of the well. Our commitment to technological advancement means that we continuously improve our services to stay at the forefront of the industry. Safety and Environmental Stewardship We prioritize safety and environmental stewardship in all our operations. Our Sample Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of eco-friendly operations, especially in sensitive onshore and offshore locations. InWaTec Combined’s Commitment to Excellence Choosing InWaTec Combined for your bailing needs means partnering with a company that is committed to excellence. Our Sample Bailer running services are designed to deliver results with precision, safety, and environmental responsibility at the forefront. We are dedicated to providing services that not only meet but exceed industry standards. Conclusion: Your Clear Choice for Clear Wells In summary, InWaTec Combined’s Sample Bailer running services represent the highest standard in wellbore cleaning and sample collection. With our advanced technology, adaptable services, and unwavering commitment to safety and the environment, we are your clear choice for ensuring the integrity and productivity of your wells. Trust InWaTec Combined to deliver clarity and quality to your wellbore operations. View Details

Check Valve Poppet Type – Tube Ends 3/8" NPT – 6000 PSI – ISO 9001

The Check Valve Poppet Type with 3/8" NPT tube ends is a compact valve designed to allow flow in one direction while preventing reverse flow in hydraulic, pneumatic, and industrial systems. It features a spring-loaded poppet mechanism that opens when forward pressure exceeds the cracking pressure and closes immediately when flow attempts to reverse, ensuring reliable protection for pumps, compressors, and other critical equipment.

Rated for a standard working pressure of 6,000 psi, with optional higher-pressure ratings up to 10,000 psi, this valve is suitable for demanding applications in oil and gas, chemical processing, instrumentation, and general industrial environments. The 3/8" NPT tube ends provide secure, leak-tight connections and easy integration into medium-diameter piping or tubing systems.

The poppet design minimizes pressure drop while delivering fast response and tight sealing, reducing the risk of backflow and system inefficiency. Built from durable materials such as stainless steel, Duplex, Super Duplex, Hastelloy, Inconel, or Monel, the valve offers long service life even in corrosive or high-pressure conditions. Factory testing ensures each valve meets standards for cracking and reseal performance, with heat code traceability for full material verification.

This type of valve is particularly effective in applications requiring precise flow control, compact installation, and reliable one-way operation, making it an essential component for maintaining system integrity and protecting valuable equipment.

View Details

Packer Setting

Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time. View Details

K Storm Choke 2 inch

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

SSV 4.51 inch for Water Injection Wells

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

2-1/2 inch Ambient Valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Thru-Tubing MatrixStixx 2.25 inch

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success! View Details

Maui ROV, Heavy Inspection Class ROV

Designed for the Extraordinary - Meet Maui ROV Are you ready to take your subsea operations to new heights? Introducing Maui ROV, the ultimate subsea solution designed with large payloads in mind. With its cutting-edge vectored thruster layout, professional Aluminum frame, and remarkable payload capacity, the Maui ROV stands out as a true game-changer in the industry. Mastering the Depths The Maui ROV is built to conquer challenging dives with ease, making it the ideal choice for survey work or heavy lifting tasks. Its impressive capabilities stem from the ingenious combination of design elements that result in unparalleled performance. Powerful Features for Unmatched Performance 1. Industrial Flight Computer and Linux User Interface: The Maui ROV features an industrial flight computer and user-friendly Linux interface, ensuring seamless control and precise maneuverability. 2. Topside Integrated Console: Equipped with a 22-inch sunlight-readable monitor and a hand controller, the Topside Integrated Console eliminates the need for additional equipment, streamlining your operations. 3. 6-Axis Stability and Fully Stabilized Mode: The Maui's ROV flight computer supports 6-axis stability, providing unmatched control and stability during underwater missions. 4. Exceptional Payload Space: Utilizing smaller diameter thrusters stacked vertically, the Maui ROV boasts exceptional payload space, enabling it to carry various instruments such as the Coda Octopus 3D Sonar, INS, Multibeam Profilers, or Sub Bottom Profilers. Experience the Specifications of Excellence Take a closer look at the impressive specifications that make the Maui ROV an indispensable asset for your subsea ventures: • Depth Rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in Air: 31.2kg • Payload Capacity (Fresh Water): 9.3kg • Payload Area: 610mm x 457mm • Thrusters: 8 lateral (45deg), 6 vertical • Ballard Pull: 27kg lateral, 28kg vertical • Top Speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux Video: 2 HD camera inputs • Lights: 8x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux Power: 5/12/24/48VDC regulated Topside Integrated Console Specifications: • Output Voltage: 400VDC, 3kW • Input Voltage: 240VAC, 15A maximum • Monitor: 22in HD sunlight-readable • Case: Wheeled, 610x420x260mm, 24kg • Fully Isolated Output with LIM • Intel i5 PC with Windows 10 Installed • Aux HDMI Monitor Output Tether Specifications: • Breaking Strength: 250kg • Diameter: 9.1mm • Length: Up to 500m • Neutral in Fresh Water Explore the Depths with Maui ROV Unleash the power of heavy payloads and challenging dives with the Maui ROV. Let our state-of-the-art technology redefine your subsea operations and elevate your success. View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 47-53.5 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details