This 2-way panel-mounted ball valve with Tube OD connections is designed to control, start, or stop fluid flow in oil and gas tubing systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or bypass lines.

The Tube OD connections allow direct attachment to tubing without additional fittings, simplifying installation and reducing potential leak points. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves are centralized or where physical access to the tubing is limited.

The valve features a floating ball design that ensures leak-proof shut-off under high-pressure conditions. Standard working pressure is 6000 PSI. It is designed and tested to ASME B16.34 for pressure-temperature ratings, and valve ratings follow ASME Process Piping Code B31.3. The valve has been type tested to MSS-SP-99 and offers a temperature range from –40 °F to 450 °F (–40 °C to 232 °C).

Operation is simple with a quarter-turn handle, providing fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Each valve is factory tested pneumatically with nitrogen gas at 1000 psig for seat and stem leakage, with a maximum allowable leak rate of 0.1 sec/min. Optional additional tests, such as vibration, temperature, and helium, are available.

The valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments. Heat code traceability ensures material verification and quality assurance.

The Monoflange DBB Double Block & Bleed Valve Flange x Thread with OS&Y and Needle Isolation is designed to provide reliable dual isolation with a controlled bleed in a single assembly. This configuration replaces the need for multiple individual valves, reducing the number of potential leak points and simplifying installation in oil and gas applications. The first isolation is achieved using an OS&Y valve, while the second isolation and the drain function use a needle valve, providing precise control over fluid venting and depressurization.

This valve is suitable for instrument and gauge isolation, chemical injection points, sampling connections, and direct or remote mounting of instruments. It supports high-pressure systems with a range from Class 150 to Class 2500, and accommodates both reduced and full bore options. Constructed from durable materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can also be supplied with NACE-compliant materials on request.

Manufactured in accordance with recognized standards such as ASME B16.34, API 6D, and ISO 17292, the Monoflange DBB provides a compact, robust solution for dual isolation with reliable venting. Its integrated design reduces stress on piping systems, minimizes maintenance needs, and ensures consistent performance in critical oil and gas applications.

Hex Reducing Nipples Male NPT are pipe fittings designed to connect two female-threaded pipes of different diameters while maintaining a secure and leak-resistant seal. The male tapered threads provide a tight connection that prevents fluid leakage, which is especially important in high-pressure systems.

These fittings are widely used in the oil and gas industry, chemical processing, and instrumentation applications where a reduction in pipe size is required without adding extra joints.

They are manufactured from high-quality materials such as stainless steel, brass, and other compatible alloys, ensuring durability and resistance to corrosion. The fittings are precision-machined from bar stock to provide burr-free internal surfaces for smooth flow and to reduce turbulence within the system. Threads are carefully capped and packed to prevent damage during transit.

Hex Reducing Nipples are rated for pressures up to 10,000 PSI and comply with ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228 standards. They are designed for reliable performance in ambient temperatures from -28 to 37°C (-20 to 100°F) and support efficient installation with standard wrenches thanks to the hex shape, which allows secure tightening. These features make them suitable for high-pressure and instrumentation piping systems where both reliability and traceability are required.

The Double Block & Bleed Valve Flange x Flange 3/4” (DN 20) with Ball isolation and Needle drain provides dual isolation in oil and gas piping systems. The first ball isolates upstream flow while the second ball isolates downstream flow. The needle drain vents trapped pressure between the two isolation points, making it suitable for instrument or gauge isolation, chemical injection, or sampling in operations where maintenance or measurement is required without interrupting the main process.

This specific 3/4” (DN 20) valve is rated for Class 150 service. It has a flange diameter of 100 mm, a bore of 69.9 mm, a flange thickness of 15.9 mm, and uses four bolts of 1/2” size. The face-to-face length is 203 mm. It is manufactured from materials compatible with oil and gas environments and meets ASME B16.34, API 6D, and ISO 17292 standards for pressure-temperature performance and reliability.

Square Body Needle Valves Male x Female are engineered for precise flow control and isolation in high-pressure piping systems. The square body design provides a rigid, compact structure that allows for stable mounting, easy wrench access, and alignment during installation. The male and female threaded ends enable secure connections to instrumentation, piping, or process equipment, ensuring leak-tight operation.

These valves are used in oil and gas applications such as connecting impulse lines, controlling flow to pressure transmitters, and isolating instrumentation for maintenance or calibration. The square body allows for easy integration into compact manifolds or tight piping layouts where space and alignment are critical.

Constructed to meet ASME B16.34 and MSS-SP-99 standards, the valves are rated for standard working pressures of 6000 psi, with optional higher-pressure ratings available. They operate effectively over a wide temperature range and are factory-tested for seat and packing leakage, ensuring reliable, consistent performance in demanding field conditions.

The Gauge Root Bleed Valve with vent tube and handle is a high-pressure valve designed to provide safe venting and pressure release in industrial and oil and gas systems. It is typically installed in high-pressure piping where pressure gauges or instruments are connected, allowing operators to isolate and safely bleed off pressure for maintenance, calibration, or inspection. The vent tube directs released media away from the operator, reducing the risk of injury or contamination, while the handle provides easy and precise manual operation.

This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request, and is constructed with a metal-to-metal body and bonnet seal for reliable sealing at high temperatures and pressures. It features a backseat stem for added security, a self-centering, non-rotating tip to ensure leak-free performance, and a simple adjustable gland retainer to maintain packing stability over time.

Factory testing includes pneumatic tests with nitrogen at 1000 PSI to verify seat and packing integrity, with a maximum allowable leak rate of 0.1 sec/min. The valve materials can be supplied in stainless steel or other corrosion-resistant alloys and are compatible with NACE MR 01-75 standards. Heat code traceability ensures quality control and material verification for critical applications.

This valve is essential for safely isolating and venting pressure from instruments, gauges, or process line.

The 3/8" poppet type check valve with female × female NPT connections allows fluid to flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism responds quickly to flow changes and provides a positive seal under pressure, protecting pumps, pipelines, and other equipment from reverse flow and pressure spikes. This size is suitable for small to medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required.

The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Cracking pressures are selectable from 1/3 to 25 psi to meet system-specific requirements. It is available in corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass.

The valve is designed for reliable long-term operation in demanding oil and gas environments. Its construction ensures consistent performance under varying pressures and temperatures, and the robust poppet mechanism minimizes maintenance requirements while maintaining system integrity over time.

The 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT is designed to provide a reliable and compact solution for connecting impulse lines to pressure transmitters and gauges. This manifold allows operators to safely isolate instruments from the process for maintenance, calibration, or testing, without the need to shut down the system. The T-type configuration features two valves that control flow to and from the instrument, enabling efficient block, bleed, and vent operations.

The pipe-to-pipe design ensures a direct connection to the piping system, which reduces potential leak points and simplifies installation. It is suitable for high-pressure applications, with a standard working pressure of 6000 PSI and options available for higher pressures. The manifold is built with a metal-to-metal body and bonnet seal for enhanced durability and temperature resistance, with materials that can comply with NACE MR 01 75 standards for corrosion resistance.

Additional features include a removable T-handle for low-torque operation, self-centering non-rotating stems for consistent shutoff, and a dust cap to prevent contamination. Packing is positioned below the stem threads to isolate the threads from the process media, and the stem’s rolled threads provide smooth operation and long life. The manifold is 100% factory tested for leakage and performance, ensuring reliable operation in critical oil and gas applications.