Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Single Row Deep Groove Ball Bearing

Deep groove ball bearings are similar to traditional bearings but have raceways that closely fit the dimensions of the balls that run in them. These deep grooves result in balls that are more stable and can handle higher loads than shallow-groove bearings. View Details

Storm Choke 1-1/2 inch K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Injection Valve 4 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Mobile Gas Troubleshooting

Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions. View Details

Tube Fittings Male Connector NPT – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 7/8” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Tube Fittings Male Connector NPT are used to connect tubing directly to threaded pipe systems, ensuring a secure and leak-tight joint in fluid and gas applications. The male NPT threads allow compatibility with standard pipe threads.

These fittings are unique due to their twin ferrule design, which provides a strong mechanical grip on the tubing while creating a reliable seal without requiring welding or additional sealants. The precision-machined ferrules deform evenly to prevent leaks, even under vibration, impulse, or high-pressure conditions.

Straight fittings are manufactured from bar stock, and shaped fittings are made from forgings, offering high structural strength. The case-hardened back ferrules and silver-plated female threads reduce wear and prevent galling, while the radius junction in elbows maintains smooth flow.

Installation is simplified: the tubing is inserted fully to the shoulder of the fitting, and the nut is tightened to specific torque, producing a secure connection. Male Connector NPT fittings are ready for immediate use and can be disassembled and retightened if needed.

Their combination of threaded pipe compatibility, twin ferrule sealing, and ease of installation makes them reliable and widely used in demanding industrial applications.

View Details

BMS Versol T

Introducing BMS VerSol T: The Safe and Versatile Solution for Your Cleaning Needs Cleanstream presents BMS VerSol T, the perfect replacement for harmful solvents such as NMP/NEP, glycols, and aromatics. Our solvent is designed to provide a more sustainable and safer alternative to traditional solvents that contain BTEX. BMS VerSol T is a chemical product that is fully miscible in water and/or acid and has no CLP labeling. This makes it a safe and versatile solution for your cleaning needs. Our product is a green Xylene replacement that is much safer to use and provides exceptional cleaning performance without any of the negative environmental effects of traditional solvents. In addition to being safe for the environment, BMS VerSol T is highly effective in cleaning corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is specially formulated to provide the same level of cleaning performance as traditional solvents without any of the harmful effects. BMS VerSol T is also a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative environmental effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol T is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol T today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol T and start cleaning with confidence. View Details

3.25 inch WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Dump Bailer

Revolutionize Cementing and Acidizing Operations with HOCA Oil Tools' Dump Bailers In the dynamic and challenging environment of downhole operations, the need for precise, efficient, and reliable tools has never been greater. HOCA Oil Tools, a pioneer in downhole slick line technology, is at the forefront of this demand with its state-of-the-art Dump Bailers. Specifically designed for targeted applications such as cementing and acidizing, these tools play a pivotal role in enhancing well integrity and performance. HOCA Dump Bailers: Precision in Every Drop Our Dump Bailers are engineered to deliver materials like cement, acids, or other substances directly to the required downhole location with utmost precision. Constructed from durable materials resistant to harsh chemicals and high pressures, HOCA's Dump Bailers ensure that even the most demanding downhole conditions can be tackled with confidence and control. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and demands of modern oil and gas extraction. Our Dump Bailers are designed with this understanding at their core, providing innovative solutions that address the specific needs of downhole operations. By integrating our tools into your operations, you gain access to a level of precision, efficiency, and reliability that sets new industry standards. Invest in HOCA's Dump Bailers to leverage their benefits in your downhole operations. Whether you are executing precise cement plugs, combating downhole leaks, or enhancing production through acidization, our tools provide the solutions you need to achieve optimal results. Discover the difference that HOCA Oil Tools can make in your downhole operations. With our commitment to quality, innovation, and customer service, we provide not just tools, but comprehensive downhole solutions that drive your success. Join the ranks of satisfied clients who have experienced the transformative impact of HOCA’s Dump Bailers in their operations. Choose HOCA Oil Tools for unparalleled downhole solutions that elevate your operational efficiency, safety, and success. View Details

Subsea Templates Fabricated and Installed

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Protector\'s Dismantle Bench

Attention all oil industry businesses in need of high-quality workbenches for disassembling cross-coupling protectors – Sivam has got you covered! Our workbenches are specifically designed for the task of disassembling cross-coupling protectors, ensuring that your team can work safely and efficiently. At Sivam, we pride ourselves on our commitment to using only the highest quality materials in our products. Our workbenches are built to last, with exceptional durability and reliability that ensures your team can work with confidence. We understand that precision and accuracy are crucial when it comes to disassembling cross-coupling protectors. That's why our workbenches are designed to provide a stable and secure platform for the task. Our workbenches are also equipped with a range of additional features to help your team work more efficiently and effectively. Our team at Sivam understands the importance of meeting our clients' needs. That's why we work closely with our customers to design workbenches that meet their exact specifications. We take pride in providing exceptional customer service, and our commitment to quality is second to none. When it comes to disassembling cross-coupling protectors, Sivam is the name you can trust. Choose us for all your workbench needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right! View Details

Wifi Setup

Revolutionizing Wireless Connectivity in the Oil and Gas Industry with Nulux Network Solutions In an era where instant and reliable connectivity is paramount, especially in the meticulous domain of the oil and gas industry, seamlessly integrated wireless networks are not a luxury but a necessity. Navigating through the intricate operational matrices and colossal data, Nulux Network Solutions proffers unparalleled WiFi setup services, ensuring your wireless connectivity is robust, reliable, and resilient. Nulux: A Vanguard in Wireless Solutions Through our profound expertise in devising wireless systems and infrastructure, Nulux has become synonymous with impeccable wireless communication links. Whether it’s through point-to-point or multipoint radio networks, tower construction/rigging, or mesh networks, our dedicated team ensures that geographical and physical impediments become inconsequential in your communication and data transmission endeavors. Wi-Fi Access Points: A Linchpin of Operational Efficacy Navigating through bustling work environments in the oil and gas sector necessitates the deployment of wireless networks that are not only widespread but also impeccable in terms of performance and reliability. With Nulux’s unparalleled experience in the design and deployment of wireless networks, seamless connectivity transcends your office and permeates every corner of your operation - whether it be the warehouse, facility floor, or field sites. Deciphering Point to Point and Multipoint Configurations In the context of wireless networking: Point to Point (P2P) networks furnish a direct linkage between two nodes, ensuring streamlined communication and data transmission between them. This configuration, touted for its enhanced security, due to the dedicated nature of the connection, and increased productivity, ensures your data travels securely and uninhibited from one point to another. Multipoint configurations, on the other hand, establish a connection amongst more than two points, with a single line shared amongst multiple nodes. This configuration can be particularly beneficial in scenarios that demand centralized data access across various points. The Nulux Promise: Connectivity Beyond Boundaries Tethering on our commitment to ensuring your operations are perpetually connected and data transmissions are ceaselessly secure and reliable, our WiFi setup services promise: Ubiquitous Connectivity: Ensuring every node, regardless of its geographical positioning, is perpetually connected. Robust Security: Safeguarding your data transmissions against potential cyber threats and ensuring they traverse through a secure network. Operational Efficiency: Through our WiFi setups, we ensure your operational matrix, be it documentation review, QA-QC, or project planning, is continually enhanced and refined. Cost-Effective Solutions: Ensuring your wireless network, whether it be a point to point or multipoint configuration, is not only operationally beneficial but also financially viable. In the intricate and operationally critical realm of the oil and gas industry, ensuring your wireless connectivity is not only robust but also reliable and secure, is paramount. With Nulux Network Solutions, you’re not merely adopting a WiFi setup; you’re embedding a network that promises operational excellence, secure data transmissions, and an enhanced operational matrix. Connect with Nulux today and ensure your operations are always connected, your data transmissions always secure, and your wireless network is always reliable. View Details

Truck Oil Absorbent Spill Kit

The spill kit contains, 10 Pads 8” x 19” 2 Sorbent Socks 3” x 4 ft 1 Pair Nitrile Gloves 2 Disposal Bags Pads 8” x 19” Deploy these absorbent pads on liquid spills, especially those involving oil-based substances. Their dimensions and absorbent properties make them effective in quickly containing and cleaning up spills, contributing to a cleaner and safer environment. Whether as part of an emergency response kit or for routine maintenance, these absorbent pads provide a practical solution for liquid cleanup needs. The absorbent pads come in a pack of 10, with each pad measuring 8 inches by 19 inches. This size provides practical coverage for various applications. 2 Sorbent Socks 3” x 4 ft Whether as part of an emergency kit or for routine maintenance, these Sorbent Socks offer a practical solution for managing liquid spills. Quantity: The package contains 2 Sorbent Socks, offering a practical quantity for spill response. Dimensions: Each sock is 3 inches in diameter and 4 feet in length, providing versatility in deployment. Material: Made from sorbent materials designed to effectively contain and absorb liquid spills. Hydrophobic Nature: Repels water, focusing on absorbing oil-based substances. Adaptability: Mouldable model allows the socks to conform to different surfaces and shapes. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 2 Disposal Bags Includes 2 Disposal Bags, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal Bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met spills. Truck Oil Absorbent Spill Kit Used in industrial settings, transportation and areas dealing with hazardous materials. View Details

HDI Gauge Batteries, Parts, and Repair Kits

HDI Gauge systems used in oil and gas operations are often exposed to harsh environments and continuous use. To maintain accuracy, reduce downtime, and extend the service life of these systems, it is critical to have access to replacement components that are both durable and compatible. A full range of spare parts is available to support maintenance needs, including displays, sensors, cables, processor boards, connectors, and housing elements.

These parts are designed to be interchangeable across compatible models, allowing operators to replace worn or damaged components without requiring full system replacement. This modularity improves cost efficiency and simplifies logistics, especially in remote field locations. Most components are field-replaceable, reducing the need for specialized service technicians and enabling faster return to operation.

Processor boards and display units typically share a common design across multiple gauge models, streamlining inventory requirements and providing flexibility during urgent repairs. Sensors are matched with gauge heads for calibration accuracy but can be easily re-paired and recalibrated in the field or through service support if needed.

Using certified or manufacturer-specified replacement components ensures continued compliance with safety standards, maintains the expected measurement accuracy, and supports the longevity of the equipment. These parts are often backed by service documentation or part tracking for maintenance records and equipment history management.

In short, a well-organized supply of compatible, high-quality parts is essential for effective pressure and temperature gauge system upkeep in demanding industrial settings.

View Details

Pup Joints for Completions

Oilfield pup joints are short sections of pipe that are used to connect longer sections of pipe in the oil and gas industry. View Details

9 5/8" Hydraulic Set Large Bore Retrievable Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for 9 5/8” Casing

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer engineered for 9 5/8” casing, providing enhanced flow capacity and efficient wellbore isolation for production, injection, and zonal isolation applications. Designed to maximize flow efficiency while maintaining well integrity, this packer is set hydraulically by applying tubing pressure, eliminating the need for mechanical tubing manipulation. The expanded internal diameter minimizes flow restrictions, making it an ideal solution for high-rate production and injection wells. Once set, the multiple packing element systemensures a mechanically locked, long-lasting seal, maintaining pack-off force throughout its operational life.

To prevent movement under differential pressure, the hydraulic hold-down pistons engage after setting, while the body lock ring secures the setting force, ensuring bottom-hole pressure variations or tubing contraction do not affect the seal. The large bore design allows for unrestricted flow paths, improving overall reservoir performance and artificial lift system efficiency. This makes it particularly valuable in ESP, gas lift, and other high-flow applications, where maintaining maximum production rates is critical.

For retrieval, operators can use a straight upward pull or an optional right-hand rotational release for controlled removal, reducing the risk of stuck tools and minimizing intervention time. With its high-capacity flow path, secure hydraulic setting, and efficient retrievability, the HPL-1 packer for 9 5/8” casing is an optimal solution for operators looking to enhance well performance, reduce pressure losses, and maintain long-term well integrity.

View Details

Tubing End Locator

Streamline Your Downhole Operations with HOCA Oil Tools' Tubing End Locator In the evolving landscape of the oil and gas industry, precision and efficiency are paramount. As specialists in downhole slick line tools, HOCA Oil Tools is proud to present our Tubing End Locator, a precision-engineered tool designed to enhance the effectiveness and efficiency of downhole operations. Understanding the critical nature of accurate well measurements and operations, our Tubing End Locator stands out as a must-have tool for any downhole toolkit. HOCA's Tubing End Locator: Precision Engineered for Optimal Efficiency The HOCA Tubing End Locator is specifically designed to accurately identify the end of the tubing in wellbores, a crucial step in various downhole operations. Built with high-grade materials and engineered to withstand harsh downhole environments, our Tubing End Locator ensures reliable performance and precise measurements, aiding operators in conducting seamless downhole interventions and maintenance. Experience the HOCA Difference in Downhole Innovation At HOCA Oil Tools, we are committed to driving innovation and excellence in the oil and gas industry. Our Tubing End Locator exemplifies this commitment, providing operators with a reliable, accurate, and efficient tool that streamlines downhole operations and enhances well integrity. Integrating our Tubing End Locator into your downhole operations not only signifies a commitment to accuracy and efficiency but also positions your operations at the forefront of technological advancement. With HOCA Oil Tools, you gain more than just a product; you acquire a partner dedicated to supporting your operational success with cutting-edge solutions and expert service. Choose HOCA Oil Tools' Tubing End Locator for your downhole needs and join the ranks of satisfied clients who trust our products to deliver unmatched performance and results. Elevate your downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency. View Details

Tubing Hanger Coupling – 6 5/16” to 2 1/2”

The 6 5/16” to 2 1/2” Tubing Hanger Coupling is a specially made part used in oil and gas wells to connect a large casing opening to smaller tubing—typically 6 5/16 inches—to a smaller 2 1/2-inch upset production tubing. This size combination is often selected for well designs that require a broader casing interface for flow management, safety equipment, or well control hardware, while maintaining a slimmer production string for specific flow requirements or structural considerations.

This coupling is manufactured with upset-end compatibility, meaning it is suited for tubing that has thickened ends designed to strengthen threaded connections. This feature improves mechanical reliability and helps the connection withstand downhole pressure, tensile loads, and thermal cycling. The union nut design allows the coupling to be installed by tightening the nut without rotating the upper wellhead assembly, which is particularly useful in space-constrained or high-integrity environments.

To accommodate a range of operational needs, the coupling can be threaded on both ends to suit different tubing or spool designs and is compatible with back pressure valves—providing added safety during pressure control, intervention, or servicing. Built in accordance with API specifications and from high-strength materials, the coupling is designed to operate reliably in demanding conditions, including high-pressure wells and corrosive environments.

View Details

Well Servicing Pipe Wrenches for torquing tubulars and downhole tools

The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose! View Details

Custom buoyancy options for color, depth rating, and covering area

Unleashing the Power of Custom Buoyancy Units for Subsea Robotics: Poseidon Robotics At Poseidon Robotics, we are driven by a passion for innovation and a commitment to empowering the subsea exploration industry. Today, we are thrilled to introduce our latest breakthrough - Custom Buoyancy Units. These state-of-the-art buoyancy solutions are designed to enhance the performance and versatility of your subsea robotics, delivering unparalleled control and efficiency in every underwater mission. Tailored to Your Needs: Custom Buoyancy Options We understand that no two subsea missions are the same, and that's why our Custom Buoyancy Units offer a world of possibilities to cater to your specific requirements. From the color and depth rating to the covering area, you have the flexibility to customize every aspect of the buoyancy units, ensuring they align perfectly with your operational needs. Color Customization for Enhanced Visibility In the challenging depths of the ocean, visibility is paramount. Our Custom Buoyancy Units can be tailored in vibrant colors to improve visibility and tracking during underwater operations. Whether you need to differentiate between multiple ROVs in the water or simply want to enhance visual identification, our color options offer the solution you need. Optimal Depth Rating for Any Mission Every subsea mission comes with unique depth challenges. With our Custom Buoyancy Units, you have the power to choose the optimal depth rating that suits your specific application. From shallow-water surveys to deep-sea explorations, our buoyancy solutions are engineered to withstand the pressures of varying depths, ensuring your ROVs perform at their best. Covering Area: Precision Engineering for Stability Stability is crucial in subsea operations, and our Custom Buoyancy Units are meticulously designed to provide the perfect covering area for your ROVs. Through precision engineering and advanced materials, we offer buoyancy units that maintain the ideal balance between buoyancy and stability, resulting in smoother and more controlled underwater movements. Redefining Subsea Robotics with Poseidon Robotics As pioneers in subsea robotics, Poseidon Robotics continues to push the boundaries of innovation. With our Custom Buoyancy Units, we are reshaping the future of underwater exploration. By putting the power of customization in your hands, we enable you to unlock the full potential of your ROVs and achieve new heights in subsea missions. Unleash Your ROV's Potential: Choose Poseidon Robotics Discover the limitless possibilities that await your subsea robotics with Poseidon Robotics' Custom Buoyancy Units. Elevate your underwater operations, optimize your ROV's performance, and gain an edge in your field with our cutting-edge buoyancy solutions. Contact Us Today Take the first step towards transforming your subsea missions with Poseidon Robotics' Custom Buoyancy Units. Our team of experts is ready to assist you in tailoring the perfect buoyancy solution for your unique needs. Embrace the power of customization and embark on a new era of subsea exploration with Poseidon Robotics as your trusted partner. Contact us today to unlock the true potential of your subsea robotics. View Details

Monoflange SBB Double Block & Bleed Valve – Flange x Thread – OS&Y Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange SBB Double Block and Bleed Valve with Flange x Thread connections features an OS&Y isolation valve and a needle drain, providing dual isolation in a single compact assembly. It is designed for oil and gas applications where safe venting of trapped pressure between isolation points is required, such as instrument or gauge isolation, chemical injection, and sampling lines.

The valve’s monoflange design integrates both isolation and venting functions in one unit, reducing the number of joints and potential leak paths while saving space and simplifying installation. The OS&Y isolation valve offers clear visual indication of open or closed status, allowing operators to quickly verify valve position. The needle drain provides controlled venting of pressure trapped between the isolation points, ensuring safe operation during maintenance or sampling procedures.

The valve is suitable for flange sizes from 1/2” to 2” and pressure classes from 150 to 2500, with options for reduced or full bore depending on process requirements. It is available in a variety of materials including stainless steel 316, 316L, duplex, super duplex, Hastelloy, Inconel, and Monel, and can be manufactured to meet NACE MR-0175 standards. The design complies with recognized standards such as ASME B16.34, API 6D, and ISO 17292, and is tested to low emission requirements.

This configuration is ideal for oil and gas operations requiring reliable dual isolation, precise venting, and compact installation in critical piping systems.

View Details

HP-3 Hydraulic Set High Angle 5 1/2" 14-20 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

TIG AC/DC 281 Pulse Welding Machine

Surface Heater

Test Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Test Tools In the highly specialized field of oil and gas exploration, precision, reliability, and efficiency are paramount. HOCA Oil Tools stands at the forefront of downhole technology, offering an extensive range of Test Tools designed to optimize and ensure the integrity of downhole operations. Our Test Tools are engineered to address the complex challenges encountered in modern well environments, enabling operators to conduct thorough evaluations and maintain control over their downhole conditions. HOCA's Test Tools: Precision Engineered for Optimal Downhole Performance HOCA Oil Tools' Test Tools are meticulously designed for testing tubing, locating leaks, setting hydraulic-set packers, and evaluating well integrity. These tools are crucial for maintaining well safety and efficiency, providing operators with accurate data to make informed decisions. Built from high-grade materials and adhering to strict industry standards, our Test Tools withstand the harsh downhole environment, delivering reliable performance and ensuring successful operations. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Test Tools means selecting a partner committed to your operational success. Our dedication to quality, innovation, and customer support ensures that our products not only meet but exceed the expectations of the demanding oil and gas industry. Integrating our Test Tools into your downhole operations signifies a step towards enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just equipment; you acquire a strategic advantage backed by our expertise and unwavering support. Opt for HOCA Oil Tools for your downhole testing needs and join the ranks of satisfied clients who trust our Test Tools to optimize their operations. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry. View Details

HP-3 Hydraulic Set High Angle 5 1/2" 20-23 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

5" Mech-2 Double Grip Mechanical Set Packer for 15-18 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Crew Transport using modern buses worldwide

Crew Transport buses for long term charter in locations around the world where reliable transportation is critical. Getting the crew to and from the job site in safety and comfort is key to a good start and end to the workday. Custom crew bus solutions available and every project is unique so please contact us to work together to find an optimum solution on crew transport. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Needle Valves Integral Bonnet Series – Tube OD – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Integral Bonnet Tube OD needle valves feature a one-piece construction where the bonnet is integrated with the valve body, eliminating welded joints and providing enhanced strength and safety. This design ensures durability and reliable performance in high-pressure applications, minimizing the risk of leaks or failures.

The Tube OD connections allow secure attachment to tubing while providing precise flow control, making these valves ideal for instrumentation lines, pressure measurement, and process control systems. The design supports consistent, repeatable shut-off and smooth operation, even under demanding conditions.

These valves are particularly suitable for oil and gas applications where high-pressure resistance, leak-free performance, and ease of maintenance are critical. Additional features such as rolled stem threads and mirror-finished stems reduce wear, lower operating torque, and extend service life, ensuring dependable operation in both standard and critical environments.

View Details

Wireline Spear – Downhole Fishing Tool – 1. 1/2”, 1 3/4", 2 1/4”, 2 3/4", 3 1/2” – ISO 9001:2015

The Wireline Spear is a downhole tool used in oil and gas wells to retrieve lost, broken, or compacted wireline that cannot be engaged with a standard two-prong wireline grab. It is designed for fishing operations where the wireline has become badly balled up or tightly compacted, situations where conventional pronged grabs are ineffective.

The tool is deployed on a wireline and guided down the wellbore under its own weight. Its central mandrel is surrounded by upward-pointing barbs or slips that penetrate and anchor into the wireline. When engaged, these barbs provide a secure grip on the wire, allowing the tool and wire to be retrieved to the surface.

The Wireline Spear is designed for maximum penetration into tightly balled or compacted wire. Its barbs ensure engagement even when the wire is severely entangled. Because the Wireline Spear is effectively non-releasable, it is typically run with a disconnect arrangement above the tool. This allows the assembly to be released if the wire cannot be recovered fully, preventing the tool from becoming stuck in the wellbore.

The tool is available in sizes from 1.5” to 3.5”, with a maximum outside diameter of 1.500” to 3.500” and a fishing neck O.D. of 1.375” to 2.312”. It connects to the wireline through a top connection ranging from 15/16 – 10 UN to 1-1/16 – 10 UN and can retrieve wire diameters from 0.50” to 3.50”.

The Wireline Spear is constructed from steel to withstand downhole mechanical stresses and pressures. Its design includes a central mandrel with upward-pointing barbs that secure tightly compacted or balled-up wireline. The tool’s compact dimensions and engagement mechanism allow it to retrieve wireline that cannot be captured by standard pronged grabs, and it is generally run with a disconnect arrangement above the tool to allow release if the wire cannot be recovered.

View Details

Pipe Recovery

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath. View Details

LM2500+G4 SAC 50Hz CC 2x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 2x1 is a high-performance gas turbine system designed for large-scale, high-efficiency power generation, particularly suited to the needs of oil and gas operations. This configuration links two LM2500+G4 gas turbines with a single steam turbine in a combined cycle layout—capturing waste heat from the gas turbines to produce steam and generate additional power. This approach significantly improves overall thermal efficiency while maintaining operational flexibility.

The Single Annular Combustor (SAC) with optional water injection helps the system meet emissions rules while keeping combustion stable and efficient. The LM2500+G4 improves on the previous +G4 model by increasing airflow, using better materials, and adding improved cooling. This allows it to produce about 10% more power without reducing the lifespan of critical hot parts. It can be equipped with either a two-stage or six-stage power turbine to fit different needs. Even with the higher power output, the +G4 keeps its modular, two-spool design, which makes maintenance easier and ensures reliable performance in many environments.

In the 2x1 configuration, the system delivers approximately 41% more power than a single gas turbine unit. The use of combined cycle technology ensures better fuel utilization, helping to reduce overall emissions and lower lifecycle operating costs.

The LM2500+G4 SAC 50Hz Combined Cycle 2x1 offers higher power, improved efficiency, and a flexible design, making it well-suited for large-scale oil and gas operations that demand reliable and efficient power generation. Its “50Hz” designation means the turbine is specifically optimized to supply electricity to grids operating at 50 cycles per second, ensuring seamless integration with regional power systems.

View Details

Re-perforating

Revitalizing Wells with Precision: InWaTec Combined’s E-line Re-perforating Services In the lifecycle of an oil or gas well, the need to enhance production or manage reservoir depletion often leads to re-perforating—a strategic intervention aimed at revitalizing well performance. InWaTec Combined's E-line Re-perforating Services leverage the proven efficacy of wireline technology to refine and optimize this crucial process. Wireline, or electric line, has been the traditional mode for deploying perforating guns due to its substantial benefits. The real-time depth control ensures that each perforation is placed with surgical precision, while the selectivity afforded by wireline allows for targeted interventions, focusing on zones with the greatest potential for increased production. Moreover, the reduced logistics of wireline operations, as opposed to tubing deployment, offer a streamlined, cost-effective approach to well servicing. Historically, wireline perforating guns were differentiated based on their use—either as casing guns for pre-completion perforation or through-tubing guns for post-completion jobs. In today's industry, however, this distinction has been transcended. InWaTec Combined has embraced the versatility of wireline to deliver any engineered perforating system, regardless of the well's stage of life, alongside an extensive array of explosive devices. Our E-line Re-perforating Services are not merely about revisiting existing perforations. They represent a strategic re-evaluation and reconfiguration of the well's production strategy. Whether it's addressing areas of the reservoir that were initially bypassed, bypassing damaged perforations, or creating new pathways in depleted zones, our re-perforating services are tailored to meet the unique demands of each well. At InWaTec Combined, we understand that re-perforating is an opportunity to enhance well productivity significantly. Our expert teams, equipped with advanced diagnostic tools, evaluate the well's current status to identify the most promising zones for re-perforation. With this data, we employ the latest in shaped-charge technology and explosive devices, ensuring that new perforations deliver the maximum flow and recovery possible. Choosing InWaTec Combined's E-line Re-perforating Services means entrusting your well's performance to a company that values precision, efficiency, and innovation. Our commitment to excellence ensures that your re-perforating interventions are executed with the highest level of expertise, from planning to execution. Partner with us to revitalize your wells. With InWaTec Combined's E-line Re-perforating Services, you can expect to turn potential into production, optimizing your well's output and extending its productive life. Let us help you unlock the hidden value in your wells, one precise perforation at a time. View Details

HP-3 Hydraulic Set High Angle 6 5/8" 28-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

Dump Truck for industrial construction projects

There are many different types of dump trucks available including; Standard Dump Truck, Tri-Axle Dump Truck, Superdump Truck, Truck & Transfer, Dump Trailer, Semi-End Dump Truck, Side Dump Truck, Bottom Dump, Belly Dump, Double Bottom, Double Belly Dump. From hauling material to removing demolition waste, these dump trucks help sites effectively create a clear workspace for any project. View Details

Ball Valve Lever Operated – 3-Way Female x Female Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Female × Female Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows flow to be directed between multiple pipelines, making it ideal for applications such as flow diversion, sampling lines, injection systems, or process line bypasses.

The valve supports split flow and is suitable for pressures up to 6000 PSI (maximum 10000 PSI on request) and temperatures from –40 °F to 450 °F (–40 °C to 232 °C).

The female × female connections enable secure inline installation without the need for male fittings, simplifying assembly and reducing potential leak points. The valve features a floating ball design for seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions.

It is manufactured and tested to ASME B16.34 standards, pressure-temperature rated to ASME B31.3, and type-tested to MSS-SP-99, providing verified performance and reliability in industrial environments.

Operation is efficient and reliable with a quarter-turn lever, allowing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, while replaceable seats and packings extend service life. Fire-safe designs and optional compliance with NACE MR0175 standards are available, and heat code traceability ensures material verification.

Built for demanding industrial environments, the valve is suitable for a wide range of oil and gas applications where flow control, diversion, and durability are critical.

View Details

Pull and set Mechanical Plugs

InWaTec Combined: Streamlining Well Integrity with Expert Mechanical Plug Operations In the intricate sphere of well servicing, the ability to effectively isolate sections of the wellbore is crucial. At InWaTec Combined, we specialize in providing top-tier Pulling and Setting Mechanical Plug services that ensure well integrity through precision and reliability, all achieved via mechanical wireline manipulation. Sophisticated Simplicity in Well Isolation Our mechanical plug services are designed to provide a seamless solution for wellbore isolation. The mechanical plugs can be set using the finesse of wireline operations alone, without the need for complex hydraulic systems. This method exemplifies our commitment to sophisticated yet simple solutions, providing our clients with a straightforward and efficient means to secure their wells. Tailored Tools for Diverse Requirements Recognizing that wells come in various sizes and specifications, InWaTec Combined has developed a selection of running tools to match. Depending on the size of the mechanical plug, we employ one of two specialized running tools. Each tool is designed to engage with the plug precisely, ensuring a secure and accurate setting every time. Versatility Across Operations Whether it’s a routine intervention or an emergency response, our Pulling and Setting Mechanical Plug services are versatile enough to adapt to the specific needs of the operation. This versatility is a testament to the depth of our expertise and the breadth of our technological capabilities. Efficiency in Execution The use of mechanical wireline manipulation for setting and pulling plugs not only provides precision but also enhances operational efficiency. By eliminating the need for additional hydraulic equipment, we can execute operations more quickly, reducing downtime and optimizing well productivity. A Commitment to Operational Excellence At InWaTec Combined, our services are underpinned by a steadfast commitment to operational excellence. We don’t just deliver tools and technologies; we provide a partnership that prioritizes the integrity and productivity of your well operations. Our experienced technicians and state-of-the-art equipment stand ready to deliver results that exceed expectations. Conclusion: Ensuring Well Integrity with Precision In conclusion, InWaTec Combined's Pulling and Setting Mechanical Plug services represent the pinnacle of well intervention solutions. Our precision-engineered tools and expert wireline manipulation techniques ensure that well integrity is maintained with the utmost efficiency and reliability. Trust InWaTec Combined to be your partner in well servicing operations, where every plug set is a step towards ensuring the ongoing success and safety of your well activities. View Details

Custom ROV Grabber Jaws

10 3/4" Mech-1 Single Grip Mechanical Set Packer

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

CSA 36 unit Locking FAST charger rack

Enhance Charging Security and Efficiency with the CSA 36 Unit Locking FAST Charger Rack from Provix Provix is proud to offer the CSA 36 Unit Locking FAST Charger Rack (Part # NWI-NWCR-36BLC), an advanced charging solution designed to cater to the needs of mining, construction, and industrial professionals. This charger rack is an ideal blend of speed, security, and capacity, perfect for medium to large-scale operations. Swift Charging for Continuous Operations The CSA 36 Unit Charger Rack is engineered for quick and efficient charging, reducing downtime to a minimum. It boasts a charging time of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This rapid charging capability ensures your team's equipment is promptly ready for use, enhancing overall productivity. Secure Locking Mechanism for Added Safety With its locking feature, the CSA 36 Unit Charger Rack provides an extra layer of security, safeguarding your valuable equipment during charging. This is especially crucial in environments where the risk of theft or tampering is a concern. The locking mechanism ensures that the equipment remains secure, offering peace of mind and improved safety in the workplace. Space-Efficient Design for Organized Workspaces Despite its capacity to charge 36 units, this charger rack is designed with space efficiency in mind. Its compact form factor makes it an excellent fit for equipment rooms and charging stations where space is at a premium, helping maintain an organized and clutter-free environment. Durable Construction for Industrial Environments Built to withstand the harsh conditions typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust construction ensures it can endure daily wear and tear, offering long-term, dependable performance. Ideal for Varied Operational Needs Whether you’re managing a mining operation, a construction site, or an industrial facility, the CSA 36 Unit Locking FAST Charger Rack is an excellent choice. It accommodates a considerable number of units, making it suitable for operations that require efficient and secure charging solutions. Upgrade Your Charging Setup with Provix Invest in the Wisdom CSA 36 Unit Locking FAST Charger Rack to streamline your charging processes and enhance the security of your equipment. Visit Provix at www.provix.net to learn more about this high-capacity, secure charging solution and explore our range of specialized mining equipment. View Details

RF Communication Solutions

Empowering the Oil and Gas Sector with Nulux’s Robust RF Communication Solutions Navigating through the complex and often unpredictable terrain of the oil and gas industry demands a communication infrastructure that is not only steadfast but also adaptive to the unique challenges this field brings. Nulux Network Solutions, leveraging its profound knowledge in wireless communication technology, stands at the forefront of providing Radio Frequency (RF) communication solutions that are not only reliable but also tailor-made for the intricacies of your operations. Breaking Through Boundaries with Nulux’s Wireless Proficiency With the mission of maintaining the momentum in fast-paced working environments, our team at Nulux ensures your operations are supported by wireless networks that are not only resilient and secure but also robust enough to cater to every spectrum of your business - from the office to the very heart of your field operations. The Power of Point-to-Point Networks A P2P network offers a dedicated communication pathway between two distinct points, providing a secure, reliable, and efficient medium for data transmission. Particularly for the oil and gas industry where data security is paramount, a P2P network safeguards your critical data, transmitting it securely across your private network, shielding it from potential external threats, and thereby ensuring the continuous and unhindered flow of information. Multipoint Networks: Connecting Every Operational Node Multipoint configurations, connecting more than two points via a shared line, are invaluable in scenarios demanding comprehensive centralized data access, ensuring every operational node is perpetually connected and synchronized, irrespective of the geographical disparities amongst them. Advantages at a Glance Increased Productivity: Ensuring the continuous availability of critical centralized files for every operational node, irrespective of geographical positioning. Robust Security: Through private networks, safeguarding your data against potential interception and ensuring it traverses securely across your operational matrix. Cost-Effective: When conventional hard-line connections are logistically or financially unviable, our wireless solutions present an economical alternative without compromising on functionality or reliability. Nulux’s RF Communication Solutions: A Beacon of Reliability in a Sea of Uncertainty Our commitment to staying ahead in the ever-evolving domain of wireless technology ensures your operations are always supported by state-of-the-art RF communication solutions. These solutions are not merely communication networks but are strategic assets, enhancing operational efficiency, safeguarding critical data, and ensuring every node of your operation is continuously and reliably connected. In the intricate and unpredictable realm of the oil and gas industry, ensuring the reliability, security, and efficiency of your communication networks is not merely beneficial but is paramount. Through Nulux’s RF communication solutions, your operations are not only empowered with robust communication networks but are also endowed with a strategic ally, ensuring your operational matrix is perpetually connected, your data transmissions are secure, and your communication networks are reliable and steadfast. Seamlessly integrate Nulux’s RF Communication Solutions into your operational matrix and ensure your operations are always connected, always secure, and perpetually empowered with robust and reliable communication networks. Connect with Nulux today and navigate through the complexities of the oil and gas sector with the assurance of robust, reliable, and secure communication networks. View Details

Mechanical Tubing Perforator

Gauge Root Valve – Male x Female – 1/4” NPT – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female 1/4” NPT is designed to provide reliable isolation and control for pressure measurement instruments in chemical, petrochemical, and oil and gas applications. It allows a secure connection between the process line and pressure gauges, ensuring accurate readings while preventing backflow and leakage. This size is commonly used where compact instrumentation connections are needed, offering precise control in tight piping configurations.

The valve is constructed and tested according to ASME B16.34 for pressure and temperature ratings and complies with ISO 9001, PED, and ATEX standards, confirming quality and suitability for use in hazardous or pressurized environments. It has a standard working pressure of 6000 PSI, with higher pressures available upon request. The metal-to-metal body and bonnet seal ensures high-pressure and temperature performance, and the self-centering, non-rotating stem tip provides consistent shutoff for leak-free operation.

Additional design features include a simple, adjustable gland retainer for stable packing, a back seat for added security, a removable T-handle for low torque operation, and a dust cap to protect the stem from contamination. All valves are 100% factory tested for seat and packing leakage using nitrogen gas at 1000 PSI, ensuring reliable performance. This valve is ideal for isolating and protecting pressure measurement instruments.

View Details

Needle Valves Square Body Series – Female x Female – 1/4", 3/8”, 1/2”, M20 x 1.5, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Square Body Needle Valve Female x Female is engineered for precise flow control in high-pressure fluid systems commonly found in the oil and gas industry. Its design features a robust square-shaped body, which provides stability during installation and operation, reducing the risk of leaks and mechanical stress. The female x female configuration allows the valve to connect two female-threaded pipes or instrumentation components directly, eliminating the need for additional adapters and simplifying system layout.

The valve operates with a fine-threaded stem that provides smooth, accurate regulation of fluid flow, enabling controlled start, stop, and throttling functions. A metal-to-metal body bonnet seal ensures reliable sealing at high pressures and temperatures, while the back-seated stem and self-centering tip deliver consistent, leak-free shutoff.

These valves are suitable for a range of applications, including instrumentation, process monitoring, sampling, and control systems, where precise flow control and reliable operation are critical. The square body design also facilitates easy wrench access and torque application, making installation and maintenance straightforward in complex piping arrangements.

View Details

Geotechnical exploration rig

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT View Details

LM2500XPRESS+G5 DLE UPT Gas Turbine

The LM2500XPRESS+G5 DLE UPT is a modular aeroderivative gas turbine system built for fast, flexible, and efficient power generation in both onshore and offshore environments. It is particularly well-suited for applications across LNG facilities, gas pipelines, gas processing plants, and general power generation, including electricity production at both 50 and 60 Hz, without the need for a speed reducer.

The "+G5" designation refers to its fifth-generation power turbine, offering the highest output and efficiency in the 20–40 MW class. It supports both high-speed and low-speed power turbine configurations, allowing integration into a variety of grid or mechanical drive systems.

At its core, the G5 includes a high-pressure compressor derived from the LM2500+G4, now redesigned for longer service life. In a simple cycle, it achieves up to 41% efficiency, which is notable for a turbine of this size class. The system can start from cold and reach load in about five minutes, making it ideal for rapid-response applications.

The unit is built for speed and simplicity. It’s shipped in preassembled modules, with a compact footprint that helps reduce installation time.

The Dry Low Emissions (DLE) system supports environmental compliance without requiring water or steam injection, simplifying operations and reducing resource demands.

Altogether, the LM2500XPRESS+G5 DLE UPT provides a practical solution for projects that need reliable, fast, and efficient power without a complex setup.

View Details