Ballycatter.ca - Industrial Equipment

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT View Details

5 Valve Manifolds Valve Manifold T Type – Pipe to Flange – 6000 PSI

The 5 Valve Manifold T Type, Pipe to Flange is engineered to connect impulse lines to differential pressure transmitters in industrial and oil and gas applications. It features 1/2” Female NPT Pipe to Flange connections set at 54mm (2-1/8”) centers, with a configuration consisting of two block valves, two equalizer valves, and one bleed valve. This design allows for efficient isolation, calibration, and maintenance of transmitters while maintaining process integrity.

The T Type configuration is especially useful because it provides a compact and organized valve layout that simplifies operations like bleeding and equalizing, reducing the risk of leaks and measurement errors. Using a 5 valve manifold ensures maximum operational flexibility, allowing operators to isolate the instrument, balance pressure, and vent safely without interrupting the main process.

Pipe to Flange connections are chosen when connecting transmitters or instruments to existing flanged piping systems, offering strong mechanical support and compatibility with industry-standard flanges. This combination of T Type, 5 valves, and pipe-to-flange connections ensures accurate, reliable, and safe pressure measurement and calibration in critical oil and gas operations.

View Details

Pumpjack C-320D-256-144 for application in the majority of oil wells

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Gas Supply

Reliable Gas Supply Solutions: Your Peace of Mind with Lovat Gas Solutions When you reach out to Lovat Gas Solutions, it's because you have a pressing need for gas. We understand the urgency and importance of resolving this issue promptly and efficiently. That's why we take our job seriously – to provide you with a gas supply solution that not only solves your immediate problem but also ensures a seamless experience without creating further headaches for your business. At Lovat Gas Solutions, we pride ourselves on our ability to develop and execute reliable gas supply solutions tailored to your specific application. We prioritize understanding your unique needs and challenges, working closely with you to devise a solution that effectively and consistently meets your requirements. Why choose Lovat Gas Solutions for your gas supply needs? 1. Customer-Centric Approach: Your satisfaction is our top priority. We listen attentively to your concerns, taking the time to understand the intricacies of your gas supply requirements. Our dedicated team is committed to developing and executing a solution that reliably solves your problem without causing additional complications. 2. Reliability: We recognize the critical importance of reliable gas supply for your business operations. With our extensive industry experience and expertise, we ensure that the gas supply solution we provide is dependable, allowing you to focus on your core business activities with peace of mind. 3. Tailored Solutions: We understand that each application is unique, requiring a customized approach. Our team of experts takes a proactive and innovative approach to develop a solution that precisely addresses your gas supply needs. Our goal is to exceed your expectations and provide you with a solution that seamlessly integrates into your existing operations. 4. Seamless Execution: At Lovat Gas Solutions, we believe in delivering on our promises. With meticulous planning, efficient execution, and attention to detail, we ensure a smooth transition from gas supply issues to reliable operations. Our commitment to your success is reflected in our dedication to providing a hassle-free experience. When you choose Lovat Gas Solutions, you choose a partner that takes your gas supply needs seriously. We are dedicated to solving your gas supply challenges without creating further headaches for your business. Contact us today, and let our experienced team develop and execute a reliable gas supply solution that meets your unique requirements. Experience peace of mind with Lovat Gas Solutions as your trusted gas supply partner. View Details

Wireline Drift

Maximize Well Integrity and Performance with HOCA Oil Tools' Tubing Drifts In the complex and demanding environment of oil and gas extraction, ensuring the integrity and functionality of downhole tubing is paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance the safety, efficiency, and productivity of your operations. Our Tubing Drifts stand out as a testament to our commitment to quality and precision in downhole slick line tools. HOCA’s Tubing Drifts: Precision Engineered for Optimal Performance Tubing Drifts are essential tools designed to ensure the clear passage within downhole tubing, preventing costly blockages and ensuring the smooth operation of subsequent downhole tools and processes. Made from high-quality materials and engineered to meet rigorous industry standards, HOCA Oil Tools’ Tubing Drifts are designed to provide accurate measurements and clearances, ensuring your tubing is free from obstructions and ready for operation. Experience the HOCA Difference in Downhole Operations At HOCA Oil Tools, our mission is to provide the oil and gas industry with downhole tools that exceed industry standards and meet the complex demands of modern drilling and extraction processes. Our Tubing Drifts embody this mission, offering precision, reliability, and efficiency to enhance your downhole operations. Incorporating HOCA’s Tubing Drifts into your downhole tool inventory signifies a step towards optimized well maintenance, enhanced safety, and increased operational efficiency. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your success with innovative solutions and expert service. Choose HOCA Oil Tools’ Tubing Drifts for your downhole operations and join the ranks of satisfied customers who trust our tools to maintain the highest standards of well integrity and performance. Elevate your downhole operations with HOCA Oil Tools – where quality meets innovation. View Details

Remote Operated Vehicle (ROV) Training Courses

Dive into the Depths: Introducing Subsea ROV Training Courses We believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise The instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact us today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration! View Details

USB Adapter Magnetic USB Charger

Simplify Your Charging with the Wisdom USB Adapter – A Smart Solution from Provix Provix is excited to unveil the Wisdom USB Adapter, a cutting-edge charging accessory designed to enhance your charging experience. This magnetic USB charger features self-designed connectors that redefine convenience and efficiency in powering your devices. Innovative Magnetic USB Connectors The USB Adapter boasts unique magnetic USB connectors, specifically engineered for a seamless and secure connection. This design allows for quick and effortless attachment to your devices, ensuring a stable and consistent charge. The user-friendly nature of these connectors makes the charging process incredibly simple, even in less-than-ideal conditions or tight spaces. Versatile for Various Environments The Wisdom USB Adapter is designed to extend your charging capabilities across multiple settings. Whether you're at home, in the office, a hotel, or on the go, this adapter provides a reliable charging solution. Its white color and sleek design add a touch of elegance to your tech collection, making it a stylish and practical choice. Durable and High-Quality Construction Crafted with a focus on durability, the USB Adapter features a high-quality magnetic connector and a robust connecting cable. With a cable length of 1 meter, it offers the flexibility and reach needed in various charging situations. Effortless Charging Process Using the Wisdom USB Adapter is straightforward and efficient: 1. Connect the magnetic head to the multi-purpose lamp's charging interface. 2. Attach the USB connector end to a WISDOM power adapter or any standard USB port. This simple two-step process ensures your devices are charged without any hassle, keeping them ready for use whenever you need them. Ideal for Modern Professionals The Wisdom USB Adapter is a perfect match for professionals who require a reliable and efficient charging solution for their equipment. Its compatibility with various devices and ease of use make it an indispensable tool for miners, construction workers, and outdoor enthusiasts. Get Your Wisdom USB Adapter Today Embrace the convenience of the Wisdom USB Adapter, available now at Provix. Visit our website at www.provix.net to discover more about this innovative charging solution and explore our range of high-quality mining and construction equipment. Stay charged and ready with Wisdom's advanced technology. View Details

BMS Liquid Stopper

BMS Liquid Stopper: The Innovative Solution for Safe and Eco-Friendly Workover Activities If you're looking for a reliable and eco-friendly solution for your workover activities, look no further than Clearstream's BMS Liquid Stopper. Our innovative product acts as a semi-solid plug that allows workover activities without impairing the formation, all while being completely biodegradable. Traditionally, workover activities involve the use of cement or other materials to create a plug in the wellbore. However, these materials can be harmful to the formation. BMS Liquid Stopper solves this problem by providing a safe and eco-friendly alternative. Our product is specially designed to create a semi-solid plug that can be easily removed once the workover activities are complete. This allows for a more efficient and effective workover process, without harming the environment or impairing the formation. In addition to its effectiveness and eco-friendliness, BMS Liquid Stopper is also biodegradable. This means that it breaks down naturally over time, without leaving any harmful residue in the environment. This makes it the perfect solution for companies that are committed to environmental sustainability. At Cleanstream, we take great pride in our commitment to quality, safety, and environmental responsibility. Our liquid stopper is rigorously tested to ensure that it meets the highest standards of quality and effectiveness. And with its biodegradable properties, you can rest assured that you are using a product that is safe for both your business and the environment. Don't settle for traditional materials that can harm the environment and impair the formation. Choose BMS Liquid Stopper for safe, efficient, and eco-friendly workover activities. Contact us today to learn more about how our innovative product can benefit your business. View Details

Valve Manifolds 3 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 3 Valve Manifold T Type – Pipe to Flange is specifically engineered to connect impulse lines to differential pressure transmitters, ensuring accurate measurement and reliable operation in industrial systems. Its T-type configuration features two block valves, one equalizer valve, and vent/test ports, allowing operators to isolate the transmitter, equalize pressure, and perform maintenance or calibration safely without disrupting the overall process. This setup is particularly useful in oil and gas, petrochemical, and process control applications where continuous operation is critical.

The manifold is built with 1/2” Female NPT Pipe to Flange connections set on 54mm (2-1/8”) centers, providing standardized and secure interfacing with pressure transmitters. High-quality construction includes metal-to-metal body and bonnet seals to withstand pressures up to 6000 PSI and temperatures ranging from -50°C to 230°C, with higher temperature ratings available using graphite materials. The design ensures leak-free performance through features such as self-centering, non-rotating valve tips, back-seated stems for added security, and rolled threads for smooth operation.

Additional operational benefits include easily adjustable gland retainers for maximum packing stability, removable T-handles for low-torque operation, and dust caps to protect actuating threads. Each valve is 100% factory tested, with traceable heat codes, and meets rigorous standards including ASME B16.34, MSS-SP-99, and ASME B31.3, making the manifold a robust and reliable solution for high-pressure industrial applications.

View Details

Rod Pump of various diameters and stroke lengths to optimize oil production

Sucker rod pumping systems are the oldest and most widely used type of artificial lifting system for oil wells. Sucker-rod pumping is the most widely used artificial lift method for onshore oil wells. Sucker-rod strings transfer the motion from the driving machine on the wellhead to the downhole oil pump. Pump diagnoses are generally conducted through an interpretation of the pump dynamometer graph (pump card). View Details

T type Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

Pipe Fittings Hex Nipples Male NPT – 1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

The Hex Nipple Pipe Fitting with Male NPT threads is a precision component used to connect two female-threaded pipes or fittings in instrumentation and process control systems. The male tapered threads create a tight, leak-resistant seal when engaged with a corresponding female NPT connection, making it suitable for high-pressure and high-temperature applications commonly found in the oil and gas industry.

Manufactured from high-quality bar stock, the fitting provides strength and durability. Threads are capped and carefully packed to prevent damage during transport. The fitting is marked with the manufacturer’s name, size, material, and heat code for traceability. The design ensures proper thread engagement, reliable sealing, and smooth flow of fluids or gases.

These fittings meet or exceed ASME B1.20.1 standards for NPT threads and are rated according to ASME B31.3 for process piping, supporting safe and consistent operation in industrial environments. The male NPT design allows easy installation while maintaining a durable, leak-tight connection over the life of the system.

View Details

Hydraulic Set Production Packer

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) is a state-of-the-art downhole tool engineered to deliver the robustness of a permanent packer with the added convenience of retrievability. Designed for high-pressure (up to 15,000 psi) and high-temperature (up to 450°F) environments, this hydraulic-set packer is ideal for challenging well conditions.

Key Features:

• Anti-Preset Mechanism: Ensures the packer remains unset until a predetermined tubing pressure is applied, preventing premature setting during deployment.

• Anti-Reset Functionality: Upon release, a snap ring engages the mandrel, locking the lower cone in place to keep the barrel slip retracted, facilitating smooth retrieval.

• Propped Element Design: Offers superior sealing capabilities, maintaining integrity under extreme conditions.

• Barrel Slip Configuration: Located below the elements, it uniformly distributes loads to the casing, enhancing stability and performance.

• Metal-to-Metal Backup Shoes: Provide 360° casing wall contact, ensuring reliable element containment and preventing extrusion.

• No Mandrel Movement Operation: Simplifies the setting process and reduces potential operational issues.

Benefits:

• Eliminates Milling Requirements: The packer can be retrieved without the need for milling, streamlining the retrieval process.

• Enhanced Sealing and Retrieval Reliability: Combines robust sealing mechanisms with dependable retrieval features to ensure operational success.

• Reduced Rig Time: Efficient design minimizes time spent during both completion and decompletion phases, leading to cost savings.

Applications:

• Suitable for hot, corrosive, deep, and deviated wells, whether for production or testing purposes.

• Ideal for scenarios where minimal casing deformation or damage is critical.

• Supports single-trip completions and multi-packer installations.

• Effective for liner top isolation and monobore completions.

Available Sizes:

• Compatible with casing sizes ranging from 5-1/2 inches to 7-5/8 inches.

For detailed specifications, please refer to the product’s specification sheet.

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) stands as a reliable solution for operators seeking a balance between the durability of permanent packers and the flexibility of retrievable systems in demanding well environments.

View Details

Subsea X-mas Tree for subsea oil and gas developments

Subsea Christmas Trees, both standard and horizontal are available in current stock and can be shipped worldwide. The subsea x-mas tree is designed for the highest level of reliability with manual rov overrides and retrievable chokes these trees are ready for installation in the most demanding environments. If you require subsea trees, consider the time and cost savings of utilising our existing inventory. View Details

StimStixx HotStixx

Are you tired of dealing with stubborn paraffin buildup in your wells? Look no further than HotStixx by StimStixx Technologies. Our cutting-edge product utilizes a specially formulated solid acid stick to deliver heated acid vapor with pinpoint accuracy at the zone of interest, creating a powerful combination of pressure and heat downhole to eliminate paraffin buildup. HotStixx is engineered to tackle paraffin-related challenges head-on. The heated acid vapor, generated by our innovative technology, interacts with paraffin deposits, breaking them down effectively. The precise delivery of pressure and heat ensures maximum penetration, targeting the problematic areas with unparalleled accuracy. Witness the power of HotStixx as it removes paraffin buildup, revitalizing your well's performance. As the heated acid vapor does its job, it quickly vaporizes and becomes fully spent down-hole. Thanks to its high reactivity and relatively low volume, no residual contaminated effluent remains. This eliminates the need for post-treatment clean-up or disposal, reducing environmental risks and streamlining your operations. With HotStixx, you can confidently overcome paraffin challenges while minimizing downtime and maximizing efficiency. Say goodbye to costly and time-consuming maintenance associated with paraffin buildup. With StimStixx Technologies, you can focus on optimizing production and enhancing your well's performance. Join the ranks of forward-thinking industry leaders who trust HotStixx by StimStixx Technologies to eliminate paraffin buildup effectively and efficiently. Experience the power of precision pressure and heat, and unlock the true potential of your wells. The future of paraffin removal starts here. View Details

HS Hydraulic set Packer

The HS™ is setting the standard for high-performance, single-string retrievable, hydraulic-set shear-release packers. Its simple and reliable design provides maximum pre-set prevention while running and has improved sealing and retrieving reliability, metallurgy and elastomer selections it for the well environment. Other applications include: production, injection and zonal isolation; single-string selective completions or dual-string completions with multiple packers; completions that require pre-set prevention while running; deviated wells or other applications when rotation for installation or removal is not beneicial; when it is beneicial to displace and set packers after the well is langed up. The HS-S™ is beneicial when testing the tubing string before packer setting or to independently set and test individual packers in multiple-packer completions and stacked packer applications. The HS-S is the selective-set version of the HS hydraulic-set single-string packer. Setting and retrieval is the same as the HS with the exception of an inner sleeve that must be shifted mechanically before the packer will set. The selective-setting mechanism prevents the packer from premature setting when high tubing-to annulus pressure differences are encountered or when tubing- pressure tests are performed. Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

Acid Tank Skid

Our acid tanks come enclosed in a steel frame designed for safe offshore transport and are DNV certified. Available for a variety of acid chemicals and volumes, these tanks can be safely transported by truck, ship, or crane. View Details

320 GC Hydraulic Excavator

BOOM AND STICKS 5.7 m (18'8") Reach boom CAB Rollover protective structure (ROPS) Mechanical-suspension seat High-resolution 203 mm (8 inch) LCD touchscreen monitor CAT TECHNOLOGY Cat Product Link™ Remote Flash Remote Troubleshoot Auto hammer stop ELECTRICAL Two 1,000 CCA maintenance-free batteries Programmable time-delay LED working lights LED chassis light, left-hand/right-hand boom lights, cab lights ENGINE Cat C4.4 single turbo engine Two selectable power modes Auto engine speed control Auto engine idle shutdown 52° C (125° F) high-ambient cooling capacity -32° C (-25° F) cold start capability Double element air filter with integrated pre-cleaner Reversible electric cooling fans HYDRAULIC SYSTEM Boom and stick regeneration circuits Boom and stick lowering check valves Auto warm up Auto two-speed travel Boom and stick drift reduction valve Slider joysticks Tool control (two pumps, one/two way high-pressure flow) SAFETY AND SECURITY Rearview and right-hand-sideview cameras Ground-level engine shutoff switch Right-hand handrail and hand hold Signaling/warning horn SERVICE AND MAINTENANCE Sampling ports for Scheduled Oil Sampling (S·O·S) Ground-level and platform-level engine oil dipsticks UNDERCARRIAGE AND STRUCTURES Tie-down points on base frame 3700 kg (8,160 lb) counterweight (Turkey only) 4200 kg (9,300 lb) counterweight View Details

ESP 9 5/8” Production Packer

Electrical Submersible Pump Packer

A downhole Electric Submersible Pump (ESP) Packer for a 9 5/8” casing is a critical component in artificial lift systems, designed to provide a secure, pressure-tight seal between the tubing and casing while allowing the electrical cable to pass through to the ESP. Here’s how it works:

1. Hydraulic-Set, Dual-Bore Design

This single-mandrel, dual-bore packer is hydraulically set by applying fluid pressure through the tubing. This eliminates the need for mechanical manipulation, making it an effective choice for deviated or high-angle wells where mechanical setting might be challenging.

• The dual-bore design incorporates a dedicated pass-through bore, allowing the power cable to run from the surface, through the packer, and down to the ESP below.

• This configuration enables uninterrupted power delivery to the pump while maintaining zonal isolation in the wellbore.

2. Bi-Directional Slip System for Secure Anchoring

Once hydraulic pressure is applied, the case-carburized bi-directional slips engage against the casing wall.

• These slips are hardened to withstand high loads and anchor the packer firmly in place to resist both upward and downward forces caused by reservoir pressure fluctuations and ESP-induced pressure differentials.

• This ensures that the packer remains securely in position, preventing unintended movement during production or shutdown cycles.

3. Versatile Release and Retrieval Mechanism

When it’s time to retrieve or replace the ESP system, the packer features a flexible release system:

• The standard retrieval method involves applying a straight upward pull on the tubing, which disengages the slips and allows the packer to be removed.

• Alternatively, for applications where higher retrieval forces might be impractical, a cut-to-release option is available, enabling efficient removal in more challenging well conditions.

Operational Advantages

• Reliability in High-Load Applications: Designed to handle the extreme downhole conditions associated with ESP operations, including high fluid flow rates and pressure fluctuations.

• Adaptability to Various Completion Designs: The dual-bore configuration accommodates different ESP setups and cable-routing requirements.

• Efficiency in ESP Deployment: By securely isolating production zones while allowing cable pass-through, the packer streamlines the ESP installation process and enhances system integrity.

This ESP packer plays a vital role in ensuring reliable artificial lift performance, particularly in deep or high-pressure wells where stable downhole conditions are essential for maximizing production efficiency.

View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 29.3-36 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

NWB-20 Charger

Power Up Your Mining Gear with the Wisdom NWB-20 Charger from Provix Provix is excited to present the Wisdom NWB-20 Charger, a high-efficiency portable charger that is a game-changer for mining professionals. Tailored to meet the demanding needs of the mining industry, this charger offers reliable, fast, and efficient charging for your equipment. Versatile and Efficient Charging Solution The NWB-20 Charger features a wide-ranging AC input of AC 100-240 V ± 10%, 0.24 A, 50-60 Hz, making it suitable for global use. Additionally, its DC input of 7~30 V, 1.7 A, adds to its versatility, allowing it to adapt to various power sources. Optimized for Wisdom Mining Lamps Designed to complement Wisdom's line of mining lamps, the NWB-20 provides a maximum DC output voltage of 4.20 ± 0.05 V and a DC output current of 2000 mA ± 100 mA. It ensures efficient charging times of 6.5 hours for the KL8M and 4.5-6.5 hours for the KL5M, reducing downtime and increasing productivity in mining operations. Compact, Lightweight, and Portable The NWB-20 Charger is designed for portability and ease of use. It measures 116 x 76 x 56 mm (4.6 x 3.0 x 2.2 in) and weighs only 215 g (7.58 oz), making it easy to carry and store. This compact design is ideal for miners who need a reliable charging solution on the go. Reliable and Durable Charging Accessory This charger is not just about power; it's about durability and reliability. Its robust construction ensures it can withstand the harsh conditions often found in mining environments, providing consistent performance over time. Get the NWB-20 Charger Today Upgrade your mining equipment with the Wisdom NWB-20 Charger for a more efficient, reliable, and portable charging solution. Visit Provix to learn more about how this charger can benefit your mining operations. Explore our products at www.provix.net or contact our team for detailed information. View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

4 1/2” Surface-Controlled Subsurface Safety Valve (SCSSSV)

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) is selected for wells that require dependable emergency shut-in capability while handling moderate to high flow rates. This size is appropriate when production demands a larger flow area to minimize pressure drop and maintain efficient fluid flow. It provides essential well control by automatically isolating the wellbore in cases of equipment failure or loss of surface control pressure, ensuring safety without compromising production efficiency.

This SCSSSV is designed for compatibility with 4 1/2" (114.3 mm) tubing and is available with landing nipple seal bores of 3.437", 3.688", or 3.813". It supports working pressures up to 5,000 psi and comes with internal valve bore options of 1.75", 1.87", and 2.12"—allowing operators to balance flow capacity with safety requirements.

The self-equalizing mechanism minimizes differential pressure across the valve during opening, improving control and reducing mechanical wear. With sealing surfaces located outside the flow path in the open position, the valve is less susceptible to erosion and damage during production.

Constructed with a robust flapper made from bar stock, the valve features a flapper-type mechanism that reliably closes to prevent uncontrolled flow. The valve is wireline retrievable, which allows for extraction and servicing of major components without removing the entire tubing string. This capability reduces intervention time and operational costs, contributing to overall well uptime and efficiency.

View Details

Ambient 4-1/2 inch SSSV

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

HDI 3300 Temperature Gauge System

The HDI 3300 Temperature Gauge System is an intrinsically safe, battery-powered electronic temperature measurement device commonly used in oil and gas operations requiring precise temperature monitoring. Typical applications include high-pressure nitrogen pumping, geothermal and mud-based drilling, well control manifolds, flare stacks, and bulk liquid storage.

The system consists of a digital gauge display, sensor assembly, and interconnecting cable. The sensor, usually a Resistance Temperature Detector (RTD), is housed in a durable stainless steel case with various mounting options like 2-inch Male NPT, hammer unions, or flanges, allowing flexible installation near the temperature source.

The display features an LCD with numeric and analog bar graph outputs, providing temperature readings with 0.1-degree resolution and ±0.5% full-scale accuracy over a range of -50 to 150°C (-50 to 300°F). Users can switch between Celsius and Fahrenheit. It includes 4-20mA and 0-1 VDC output options for integration with remote monitoring, data logging, or control systems, and supports external power inputs.

Designed for ease of maintenance, the system is field-repairable with a replaceable battery pack. The sensor and display are factory-matched and calibrated, requiring recalibration if components are replaced. The gauge fits standard 6-inch panel cutouts and supports multiple mounting patterns. Cable lengths are customizable up to 200 feet or more.

The system operates reliably in temperatures from -40°C to +70°C and is certified for hazardous environments, with a rugged stainless steel sensor housing to withstand harsh field conditions.

The 3300 is well-suited for environments requiring precise, continuous temperature monitoring, including high-pressure drilling, well control, and fluid storage applications. Its intrinsically safe design provides dependable operation in hazardous locations without compromising safety. The solid-state electronics and durable construction reduce maintenance and downtime, while versatile mounting options allow placement close to the measurement point for accurate readings. Featuring clear numeric and bar graph displays along with remote output capabilities, the system supports timely decision-making and integrates easily with larger monitoring setups, enhancing process control and operational safety in demanding conditions.

View Details

Wireless Access Points (WiFi)

Achieving Uninterrupted Connectivity in the Oil and Gas Industry with Nulux Wireless Access Points Connectivity within the sprawling expanse of the oil and gas industry is pivotal to ensuring seamless operations, meticulous project planning, and scrupulous quality assurance. Recognizing the industry's intricate need for steadfast communication, Nulux Network Solutions proudly presents its expertise in Wireless Access Points (WiFi), a service meticulously sculpted to facilitate unbroken connections even in the most challenging terrains and bustling work environments. Unlocking New Operational Efficiencies with WiFi Solutions Incorporating wireless connections into your operational fabric isn't merely about ensuring communication; it's about unlocking new echelons of operational efficiencies, enabling rapid documentation review, streamlining QA-QC processes, and enhancing project planning through unbroken connectivity. Nulux, with its robust wireless networks, assures that every corner of your business, whether it be the office, the warehouse, or the facility floor, stays interconnected, propelling your business towards enhanced time and cost efficiency. Advantages of Opting for Nulux Wireless Access Points Reliability: In environments where every second count, our WiFi solutions ensure that your data transmission remains steadfast, unbroken, and secure. Customization: Understanding that every facility has unique challenges, our team designs WiFi networks that are meticulously tailored to your operation, ensuring optimal coverage and performance. Scalability: As your operations evolve, our wireless networks can be effortlessly expanded to cater to growing data and connectivity needs. Security: Ensuring that your data traverses through a secure network, we implement cutting-edge security protocols, safeguarding your critical operational data from potential cyber threats. Nulux – Your Ally in Enhanced Connectivity Our proficiency isn’t merely limited to providing robust WiFi solutions. Navigating through the complexities of wireless communication, we’ve developed expertise in designing and implementing various wireless infrastructures like Point-to-Point (P2P) and Point-to-Multipoint Radio Networks, and Mesh Networks, ensuring that you always find a solution that aligns with your specific needs. While P2P networks facilitate streamlined communication links between two fixed points, ensuring enhanced security and cost-effectiveness, Point-to-Multipoint networks facilitate connectivity between more than two points through a single shared line, ensuring that data can be sent and received in a many-to-many configuration. Deploying Expertise Where It Matters Being at the industry forefront in wireless technology, Nulux is committed to ensuring that as the tech evolves, your operations evolve with it. Our experienced team, having substantial experience in the nuanced domains of wireless system and infrastructure design and implementation, is dedicated to propelling your operations into a future where connectivity isn’t just ensured; it's effortlessly seamless. Elevating Operations with Nulux In an era where connectivity translates to operational proficiency, Nulux emerges as your partner, ensuring that every node of your operation stays interlinked through robust, secure, and reliable wireless networks. Explore the future of unhindered connectivity in the oil and gas sector with Nulux Network Solutions – where technology and expertise converge to elevate your operations. Join hands with Nulux, and let’s weave a network of unbroken connectivity, propelling your operations into a future where every data point, every communication, and every connection is seamless, secure, and reliable. View Details

LM2500 HPT Vertical Stand

The LM2500 High Pressure Turbine (HPT) Vertical Stand is a support fixture designed to hold the HPT module of the LM2500 gas turbine in a vertical position. It is mainly used during maintenance, inspection, or transport of the turbine module.

By keeping the turbine upright, the stand helps ensure that the module stays stable and properly aligned while work is being done. This setup also makes it easier for technicians to access certain areas of the HPT that would be harder to reach if the module were lying flat.

The stand is built to handle the weight of the HPT and includes features like mounting points or forklift slots for safe and easy movement within a workshop or maintenance area. It is commonly used in the oil and gas industry where LM2500 turbines are found in power generation or mechanical drive applications.

In short, the HPT Vertical Stand is a practical tool that helps keep the turbine secure, makes maintenance tasks safer, and supports good handling practices.

View Details

NORM Decontamination Services

As the oil, gas, and geothermal industries continue to grow, the risk of contamination from Naturally Occurring Radioactive Material (NORM) also increases. That's why Cleanstream is proud to introduce our innovative, qualitative, and rapid cleaning services for Low Specific Activity (LSA) and NORM contamination. Our advanced cleaning methods comply with LSA/NORM regulations, ensuring safety for people and the environment. We invest heavily in new methods to continuously guarantee quality. Our own radiation experts, at Radiation Protection Expert (RPE) and Radiation Protection Officer (RPO) level, always carry out the decontamination and final release. At Cleanstream, we understand the importance of cleaning without damage. That's why we've developed our own inventive cleaning methods to prevent materials from getting damaged during the cleaning process. Our experienced employees have extensive knowledge of decontamination and are involved in disassembling and decontaminating contaminated materials originating from oil and gas wells so that the metal can be recycled. Our services are both rapid and cost-effective. Because all work activities are carried out by our own staff at our 20,000 m2 premises in Ter Apel, the communication lines and turnaround times are short, resulting in considerable cost-savings for our clients. Cleanstream is licensed to clean all types of NORM/LSA contaminated materials. Cleaned objects are released by means of a certificate, showing that your material has been cleaned in accordance with laws and regulations. At Cleanstream, we are committed to embracing change and constantly improving to meet the demand. Join us in our mission to promote safety, quality, and green solutions. Contact us today to experience our innovative and efficient cleaning services for NORM/LSA contaminated materials. View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 36-43.5 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Transport Trucking services for local and international equipment hauling

Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment. View Details

9 5/8" Mech-2 Double Grip Mechanical Set Packer for 40-47 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

BMS Versol T

Introducing BMS VerSol T: The Safe and Versatile Solution for Your Cleaning Needs Cleanstream presents BMS VerSol T, the perfect replacement for harmful solvents such as NMP/NEP, glycols, and aromatics. Our solvent is designed to provide a more sustainable and safer alternative to traditional solvents that contain BTEX. BMS VerSol T is a chemical product that is fully miscible in water and/or acid and has no CLP labeling. This makes it a safe and versatile solution for your cleaning needs. Our product is a green Xylene replacement that is much safer to use and provides exceptional cleaning performance without any of the negative environmental effects of traditional solvents. In addition to being safe for the environment, BMS VerSol T is highly effective in cleaning corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is specially formulated to provide the same level of cleaning performance as traditional solvents without any of the harmful effects. BMS VerSol T is also a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative environmental effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol T is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol T today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol T and start cleaning with confidence. View Details

Bigbore Wireline Retrievable Surface Controlled Subsurface Safety Valve 4.5 inch

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

HDI 2100 Pump Stroke Counter System

When it comes to accurate and reliable monitoring of mud pumps, the HDI 2100 Pump Stroke Counter stands as the industry's leading solution. Designed as an intrinsically safe, certified, solid-state electronic stroke counter, the HDI 2100 ensures precise tracking and display of total accumulated mud pump strokes and stroke rates. Seamless Integration with the HDI 9000 Choke Console System: The HDI 2100 is most commonly found within the HDI 9000 Choke Console System, where it plays a vital role in monitoring and displaying the stroke data of up to four individual mud pumps simultaneously. With its advanced capabilities, this stroke counter provides real-time insights into pump performance, enabling operators to make informed decisions for efficient drilling operations. Uncompromising Precision and Reliability: Equipped with a quartz crystal oscillator, the HDI 2100 delivers high-precision stroke counts with zero drift. This ensures accurate and reliable measurement, even in harsh environments and high vibration conditions encountered in land and offshore drilling. Constructed with a stainless steel case and stainless steel piezo switches, the HDI 2100 is built to withstand the toughest conditions for long-lasting performance. User-Friendly and Low Maintenance: Once installed, the HDI 2100 requires virtually no maintenance or calibration, allowing you to focus on your operations with confidence. The solid-state display provides clear and reliable information, while the simple interface allows for easy calibration when needed. Battery-powered operation ensures portability and convenience, while a low battery indicator keeps you informed about power levels. Versatile Configuration Options: The HDI 2100 offers various configuration options to suit your specific needs. You can choose between micro-switch or proximity sensor inputs, depending on your preference and operational requirements. Dual sensors are also available for seamless integration with HMI/PLC systems, enhancing the automation capabilities of your drilling processes. Certifications You Can Trust: The HDI 2100 Pump Stroke Counter is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Experience the HDI Advantage: With the HDI 2100 Pump Stroke Counter, you gain access to unrivaled accuracy, reliability, and ease of use. Our commitment to excellence ensures that all HDI Gauges provide safety, accuracy, reliability, and low maintenance for our valued customers. Contact our experienced team today to discuss your specific monitoring requirements and discover how the HDI 2100 can revolutionize your mud pump operations. Trust Houston Digital Instruments for the ultimate monitoring solution. Where Safety Meets Performance - HDI, your partner in precision measurement. View Details

ROV Backplate

Unleashing the Full Potential of the Lanai ROV with M0020 Backplates We are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with us today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Lanai ROV with M0020 Backplates for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, we stand as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean. View Details

WR-SCSSSV FRN 2-7/8 inch

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

SMAW Welder MMA 201

Powerful, Portable, and Versatile: Introducing the MMA 201 Welding Machine At Canaweld, we take pride in providing welders with top-notch equipment that delivers high-quality performance across a broad range of metals and thicknesses. Designed with the construction and oil & gas industries in mind, we are excited to present the MMA 201 - a welding machine that exceeds expectations in power, versatility, and durability. Powerful Performance on the Go The MMA 201 is your ultimate welding companion, offering the best-in-class duty cycle in its category. With a maximum current of 200A and the ability to deliver 160A with a 100% duty cycle, this welding machine provides the extra power you need to tackle challenging welding tasks all day long. Whether you're on a construction site or working in the oil & gas industry, the MMA 201 has got your back. Portable and Lightweight Design We understand the importance of mobility for welders on the go. That's why we've designed the MMA 201 to be portable and lightweight, making transportation effortless. The included carrying belt ensures ease of movement, allowing you to take this welding powerhouse wherever your work demands. Unmatched Versatility The MMA 201 is more than just a Stick Welding machine. It also excels in TIG welding with a lift start, providing you with the versatility to take on a wide range of welding applications. Whether you're working with steel, stainless steel, or aluminum, the MMA 201 delivers excellent arc characteristics with the most common rods up to 5/32 inches. Built to Withstand the Toughest Conditions The MMA 201 is tested in extreme conditions, proving its resilience in temperatures up to 104°F (40°C). Its rugged construction and large size Dinse style welding connectors ensure durability and reliability even in the harshest environments. Advanced Features for Effortless Welding With automatic hot start, arc force function, and electrode anti-sticking capabilities, the MMA 201 provides an unmatched welding experience. It's fan-cooled and thermally protected against overheating, safeguarding your equipment for long-lasting performance. Experience Excellence with Canaweld When you choose the MMA 201, you choose excellence backed by Canaweld's comprehensive 3-year warranty. Trust in a welding machine that's engineered to exceed your expectations and deliver the power, versatility, and durability you need. Empower your welding journey with the MMA 201 Welding Machine. Elevate your skills, tackle challenging projects, and take your welding to new heights with Canaweld. Your welding success begins with the MMA 201 - Where Power Meets Portability! View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

ROV Transport Case

Secure Your ROV with the Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. We understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always Safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. Years of Experience With years of experience in subsea robotics and ROV technology. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection. View Details

2 1/16" Coiled Tubing Hanger 5M Pressure Rated

The 2 1/16” 5M Coiled Tubing Hanger is designed to support coiled tubing strings in well intervention and completion work. With a 5,000 psi pressure rating, it’s well-suited for moderate to high-pressure wells, and its compact 2 1/16” size makes it ideal for smaller wellheads or space-constrained setups.

It handles tubing sizes up to 3 1/2” O.D. and is commonly used for cleanouts, stimulation, logging, and other coiled tubing operations. A built-in wireline entry sub helps guide tools into the tubing while providing an extra seal and preventing tubing movement—improving well control and operational safety.

The hanger is available with API 6B or 6BX flange connections and can include a side outlet if needed. It’s a reliable, field-proven choice for operations requiring strong support and safe access to coiled tubing tools.

View Details