Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

A-3 LOK SET Packer

The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer. View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 40-47 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

CBL-VDL

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them. View Details

HDI 1000P Pressure Gauge System

The HDI 1000P Pressure Gauge System is a battery-powered, intrinsically safe electronic gauge used to monitor high-pressure systems in oil and gas operations. It measures pressure using a strain gauge sensor and provides real-time readings on a digital display with both numeric and bar graph formats. Common applications include choke manifolds, cementing units, coiled tubing, and high-pressure pumping systems.

With pressure ranges available from 5,000 psi up to 30,000 psi, the 1000P is suitable for demanding environments. It offers ±0.5% full-scale accuracy, and optional 4-20mA or 0–1 VDC outputs for integration with PLCs or remote monitoring systems. The unit is housed in a sealed stainless steel enclosure and built to perform reliably in harsh, high-vibration field conditions.

Designed for ease of use, the 1000P includes a field-replaceable battery pack and supports a range of connection types such as 2" 1502, 2002, 2202, or flanged. Its solid-state platform minimizes maintenance and ensures consistent performance over time, making it a dependable tool for critical pressure monitoring tasks.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 26-29 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Split-Shot Explosive runs

Streamlining Pipe Recovery: Introducing InWaTec Combined’s Innovative Split Shot Cutter Services When traditional methods fall short in the well servicing industry, innovation leads the way. InWaTec Combined is at the forefront of this innovation with our redesigned Split Shot Cutter Services, offering a superior alternative where conventional jet cutters cannot perform or are unsuitable. Our focus on customer-centric design and operational efficiency sets a new standard in pipe recovery solutions. The reinvented Split Shot Cutter encapsulates our commitment to ease of use and safety, allowing for straightforward electrical arming prior to loading the explosive segments. This feature not only enhances safety by simplifying the preparation process but also significantly reduces the time required to get the cutter downhole and ready for action. Our Split Shot Cutters are engineered for precision and reliability, designed to tackle the most challenging scenarios in pipe recovery. Their unique linear configuration enables the cutter to be placed precisely next to the collar or connection. Secured by robust inline magnets, the cutter ensures optimal positioning for a clean and targeted operation. Once detonated, the Split Shot Cutter works its magic, cleanly splitting the collar or connection. This critical action breaks the grip on the pipe, allowing for the straightforward extraction of the stuck sections. The result is a liberated wellbore, cleared of obstructions with minimal fuss and downtime. InWaTec Combined’s Split Shot Cutter Services are not just a tool but a transformative solution for well intervention. The technology is a testament to our innovative spirit and dedication to providing our clients with the most advanced and effective recovery methods available. Our cutters don’t just cut; they redefine the recovery process, offering unparalleled efficiency and effectiveness. Choosing InWaTec Combined's Split Shot Cutter Services means partnering with a company that prioritizes your operational success and safety. With our advanced technology and expert support, you can trust that even the most stubborn pipe recovery challenges will be met with a swift and satisfactory resolution. Experience the next level of pipe recovery services with InWaTec Combined, where we split the difference between complication and solution. View Details

Mobile Gas Troubleshooting

Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions. View Details

Packer AD-1 Tension Set

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer. View Details

Wireline Retrievable FRN 4.5 inch SCSSSV

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Stand off Protector

Rod Pump of various diameters and stroke lengths to optimize oil production

Sucker rod pumping systems are the oldest and most widely used type of artificial lifting system for oil wells. Sucker-rod pumping is the most widely used artificial lift method for onshore oil wells. Sucker-rod strings transfer the motion from the driving machine on the wellhead to the downhole oil pump. Pump diagnoses are generally conducted through an interpretation of the pump dynamometer graph (pump card). View Details

NIU - Pipe Inspection ROV

Introducing the NIU ROV: Your Ultimate Pipe Inspection Solution The NIU ROV - The Pipe Inspection Remote Operated Vehicle. Engineered to excel in pipe and tunnel inspections, the NIU ROV sets new standards for versatility, precision, and efficiency in the subsea industry. Unleash the Power of NIU ROV The NIU ROV is purpose-built to navigate the intricate and challenging environments of pipes and tunnels. With its compact design, this remarkable ROV can effortlessly maneuver through a 12-inch diameter pipe, providing unparalleled access to previously hard-to-reach areas. From industrial pipelines to underwater tunnels, the NIU ROV is your go-to solution for comprehensive inspections. Unparalleled Performance The NIU ROV is equipped with state-of-the-art technology and robust features that ensure exceptional performance in every operation. Its advanced thrusters enable precise movement and control, allowing operators to conduct inspections with utmost accuracy. The powerful onboard lighting system ensures crystal-clear visibility even in the darkest and murkiest conditions. Efficiency Redefined We understand the value of time and efficiency in subsea operations. The NIU ROV is designed to streamline your inspection processes, significantly reducing downtime and operational costs. Its ease of deployment and user-friendly interface enable quick setup and seamless integration into your inspection workflows. Tailored for Pipe and Tunnel Inspections Unlike generic ROVs, the NIU ROV is engineered specifically for the unique challenges of pipe and tunnel inspections. Its rugged construction and protective measures safeguard it from potential hazards encountered in these confined environments. With the NIU ROV, you can confidently conduct inspections with minimal risk and maximum efficiency. Cutting-Edge Technology The NIU ROV incorporates cutting-edge technology, including high-resolution cameras, to provide a comprehensive view of the inspection area. Its real-time data transmission capabilities allow operators to monitor and analyze data on the surface, making informed decisions on the spot. Unlock New Possibilities with NIU ROV From oil and gas pipelines to municipal infrastructure, the NIU ROV opens up a world of possibilities for inspecting critical subsea assets. Its adaptability and versatility make it an indispensable tool for various industries, including energy, construction, engineering, and more. Choose NIU ROV When you choose the NIU ROV, you not only invest in a top-of-the-line inspection solution but also gain access to our unmatched expertise and support. Our team of subsea specialists is ready to assist you every step of the way, ensuring that you harness the full potential of our advanced ROV technology. Embark on a New Era of Pipe Inspections Step into the future of subsea inspections with the NIU ROV - The Pipe Inspection Remote Operated Vehicle. Experience unparalleled performance, efficiency, and precision in your pipe and tunnel inspections. Contact us today to explore how the NIU ROV can revolutionize your subsea operations. Your success is our mission! View Details

ROV Field Training

Dive into the Depths: Enhance Your ROV Skills with ROV Field Training As the underwater frontier beckons with mysteries and challenges, subsea robotics is at the forefront of exploring and unraveling its secrets. At Poseidon Robotics, we believe that knowledge and skill are the cornerstones of successful ROV (Remotely Operated Vehicle) operations. That's why we are proud to present our comprehensive ROV Field Training program, designed to equip you with the expertise to navigate the depths with confidence. Unparalleled Hands-On Experience Our ROV Field Training is a unique opportunity to gain hands-on experience in operating and maneuvering advanced underwater robotics. Under the guidance of our seasoned instructors, you will immerse yourself in the world of subsea exploration, learning practical skills that will empower you to conduct successful missions and overcome real-world challenges. Tailored for All Skill Levels Whether you're a seasoned ROV pilot or just embarking on your subsea robotics journey, our training program caters to all skill levels. Beginners will receive comprehensive instruction on ROV basics, including vehicle setup, navigation, and troubleshooting. Experienced operators will have the chance to refine their skills, learn advanced techniques, and master specialized maneuvers. Customized Training for Your Needs We understand that each organization and project is unique. That's why we offer customized training programs tailored to your specific needs. Our team will work closely with you to identify your goals and objectives, ensuring that the training aligns with your requirements. Whether you're in the oil and gas industry, marine research, or environmental conservation, our training program will be adapted to suit your field. In-Depth Learning Modules Our ROV Field Training covers a wide range of critical topics, including: 1. ROV Operation Fundamentals: Understanding the vehicle components, controllers, and communication systems. 2. Navigation and Maneuvering: Mastering piloting techniques, maintaining stability, and performing complex maneuvers. 3. Mission Planning and Execution: Developing effective mission plans and strategies for successful outcomes. 4. Troubleshooting and Maintenance: Learning to identify and address common technical issues to ensure seamless operations. 5. Safety and Risk Management: Understanding safety protocols, emergency procedures, and risk assessment. Empowering Your Team for Success By participating in ROV Field Training, you are investing in the success of your team and your subsea operations. Our mission is to empower professionals like you with the knowledge and skills needed to unlock the full potential of underwater exploration and achieve remarkable results. Join the ROV Field Training Today Don't miss this opportunity to take your ROV expertise to new heights. Reach out to us today to learn more about our training program and how it can elevate your subsea capabilities. View Details

Flare Gas Capture

Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Hydraulic Set Production Packer

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) is a state-of-the-art downhole tool engineered to deliver the robustness of a permanent packer with the added convenience of retrievability. Designed for high-pressure (up to 15,000 psi) and high-temperature (up to 450°F) environments, this hydraulic-set packer is ideal for challenging well conditions.

Key Features:

• Anti-Preset Mechanism: Ensures the packer remains unset until a predetermined tubing pressure is applied, preventing premature setting during deployment.

• Anti-Reset Functionality: Upon release, a snap ring engages the mandrel, locking the lower cone in place to keep the barrel slip retracted, facilitating smooth retrieval.

• Propped Element Design: Offers superior sealing capabilities, maintaining integrity under extreme conditions.

• Barrel Slip Configuration: Located below the elements, it uniformly distributes loads to the casing, enhancing stability and performance.

• Metal-to-Metal Backup Shoes: Provide 360° casing wall contact, ensuring reliable element containment and preventing extrusion.

• No Mandrel Movement Operation: Simplifies the setting process and reduces potential operational issues.

Benefits:

• Eliminates Milling Requirements: The packer can be retrieved without the need for milling, streamlining the retrieval process.

• Enhanced Sealing and Retrieval Reliability: Combines robust sealing mechanisms with dependable retrieval features to ensure operational success.

• Reduced Rig Time: Efficient design minimizes time spent during both completion and decompletion phases, leading to cost savings.

Applications:

• Suitable for hot, corrosive, deep, and deviated wells, whether for production or testing purposes.

• Ideal for scenarios where minimal casing deformation or damage is critical.

• Supports single-trip completions and multi-packer installations.

• Effective for liner top isolation and monobore completions.

Available Sizes:

• Compatible with casing sizes ranging from 5-1/2 inches to 7-5/8 inches.

For detailed specifications, please refer to the product’s specification sheet.

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) stands as a reliable solution for operators seeking a balance between the durability of permanent packers and the flexibility of retrievable systems in demanding well environments.

View Details

Pup Joints for Completions

Oilfield pup joints are short sections of pipe that are used to connect longer sections of pipe in the oil and gas industry. View Details

Drive Down Bailers

InWaTec Combined: Streamlining Wellbore Maintenance with Drive Down Bailer Services In the intricate world of well servicing, the importance of maintaining a clear and clean wellbore cannot be overstated. At InWaTec Combined, we understand the complexities of bailing operations, whether they are conducted on drilling rigs, during workover operations, or within production wells. That's why we are proud to offer our specialized Drive Down Bailer running services, providing a robust solution for the collection of solids and the overall cleansing of the wellbore environment, both onshore and offshore. Defining Bailing Operations with Excellence Bailing operations are essential for the upkeep of wellbore integrity, allowing for the efficient removal of debris that could potentially hinder well performance. InWaTec Combined's Drive Down Bailer services are meticulously designed to handle these operations with precision and reliability, ensuring that your wellbore remains free from obstructions that could impede operational success. Adaptable Services for Diverse Settings Our Drive Down Bailer services are versatile and adaptable, capable of being deployed in a variety of settings. Whether it’s the challenging offshore environment with its unique logistical demands or the accessibility of onshore operations, our services are tailored to meet the needs of the specific operation, ensuring the same high standards of quality and efficiency are maintained across all environments. Innovative Approach to Wellbore Cleaning InWaTec Combined utilizes the latest in bailing technology, equipping our Drive Down Bailers with the capacity to effectively collect and remove solids from the wellbore. Our approach to wellbore cleaning prioritizes not only the immediate removal of debris but also the long-term maintenance of the wellbore, ensuring continued productivity and reduced risk of downtime. Safety and Environmental Responsibility Recognizing the importance of safety and environmental stewardship, InWaTec Combined conducts all bailing operations with these as core priorities. Our Drive Down Bailer services are executed with the utmost attention to safety protocols, ensuring the well-being of all personnel involved, while also maintaining the integrity of the surrounding environment. InWaTec Combined: Your Trusted Partner in Well Servicing By choosing InWaTec Combined for your bailing needs, you are selecting a partner committed to delivering excellence. Our Drive Down Bailer running services are a reflection of our dedication to providing top-tier well servicing solutions that not only meet but exceed industry standards. We are dedicated to ensuring that your operations are carried out efficiently, safely, and with the highest degree of professionalism. Conclusion: Clearing the Path to Operational Excellence In conclusion, InWaTec Combined's Drive Down Bailer services offer a strategic advantage in well servicing operations. Our commitment to precision, adaptability, and safety ensures that we provide solutions that clear the path to operational excellence. Trust in the expertise and dedication of InWaTec Combined to keep your wellbore in optimal condition, ensuring the continued success and productivity of your well operations. View Details

MC Injection Safety Valve 3-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Professional Hand Controller

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

LM2500+G4 SAC 50Hz CC 1x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

View Details

C-1 Single Grip Invertible Packer

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. View Details

MIG/STICK 221 Welding Machine

Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level. View Details

4” Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4-inch Surface-Controlled Subsurface Safety Valve (SCSSV) is designed for installation in wells with 4-inch production tubing and serves as a critical safety device to shut in the well during uncontrolled flow events caused by equipment failure or loss of surface hydraulic control pressure. The valve operates via a hydraulically actuated flapper mechanism that remains open under normal operating pressure but closes automatically if the hydraulic signal is lost. This fail-safe design isolates the wellbore, preventing unintended release of hydrocarbons and protecting both personnel and the environment.

The flapper mechanism is simple and robust, minimizing moving parts in the flow path and reducing potential points of failure. When open, the sealing surfaces are positioned out of the fluid flow path, which helps maintain smooth production flow and reduces wear on sealing components. The valve’s hydraulic actuation allows reliable operation under varying pressure and flow conditions commonly encountered in oil and gas wells.

The valve is wireline retrievable, which means it can be removed, serviced, or replaced using wireline tools without the need to pull the entire tubing string from the well. This capability significantly reduces well intervention time and associated costs while allowing maintenance or upgrades to be performed efficiently.

This SCSSV fits standard landing nipples with a seal bore of 3.313 inches and is rated for working pressures up to 5,000 psi. Its internal valve diameter is 1.75 inches, providing an appropriate balance between flow capacity and structural integrity for wells with moderate to high flow rates. The 4-inch tubing size is common in many oil and gas production wells, making this valve size versatile across different field conditions.

This size is commonly applied in production wells where 4-inch tubing is standard, supporting reliable well control and efficient maintenance. Its hydraulic surface control and simple flapper design contribute to dependable operation under varying well conditions.

View Details

High Density Fibre cable splicing

Enabling Seamless Connectivity through High-Density Fiber Cable Splicing at Nulux Network Solutions In the interconnected world of the oil and gas industry, where vast swaths of data traverse through networks, orchestrating the symphony of myriad operations, Nulux Network Solutions establishes itself as the maestro, ensuring every note, i.e., data byte, flows seamlessly, securely, and efficiently. The Core of Energy Sector: Data Transmission Navigating through the contemporary oil and gas sector necessitates not just the flow of energy, but the incessant, uninterrupted, and secure transmission of data. Nulux, proffering state-of-the-art products, solutions, and services across the comprehensive energy value chain, takes the lead in facilitating this vital data flow. Our commitment extends beyond providing robust solutions - we forge a pathway toward a more sustainable future, infusing every facet of your operations with technology that ensures your data travels not only with speed but also with uncompromised security. Nulux’s High-Density Fiber Cable Splicing: Where Technology Meets Excellence Fiber optic communication stands out as a linchpin in the modern digital world, especially within the realms of the oil and gas sector. Amidst the vast landscapes, both onshore and offshore, where operations unfold, ensuring that data connects every operational node is pivotal. Here, our High-Density Fiber Cable Splicing service comes to the forefront as a beacon of technological excellence and operational efficacy. Enhanced Connectivity: Our high-density fiber cable splicing ensures that your operations are interlinked with a network that offers enhanced, unfaltering connectivity, even in the most challenging terrains and under stringent conditions. Bandwidth Prowess: Harness the power of expanded bandwidth, facilitating the swift flow of large volumes of data across your operational network, ensuring every decision is backed by real-time data. Robust and Reliable: With a focus on durability and reliability, our fiber cable splicing ensures your network withstands the challenges, providing a robust platform for data transmission. Crafting Futures with Sustainable Data Management In the sprawling domains of the energy sector, where sustainability is progressively becoming a cardinal focus, enabling operations that are not only efficient but also eco-conscious is paramount. Our High-Density Fiber Cable Splicing embodies this principle, ensuring your data management is not only optimal but also leans toward sustainability. Navigating Through the Digital Terrain Together At Nulux, we do not merely offer a service; we extend a partnership. A partnership wherein your aspirations for operational efficiency, data security, and sustainable practices are realized through our technological solutions. Our High-Density Fiber Cable Splicing is more than a service – it is a commitment to ensuring your data flows through a network that is as steadfast, secure, and efficient as the operations it facilitates. Conclusion In a world where data permeates every operational stratum, ensuring it flows through a network that epitomizes reliability, security, and efficiency is crucial. Navigate the intricate digital landscapes of the oil and gas industry with Nulux, where your data is transmitted through networks forged from technological excellence and a commitment to sustainability. Join hands with Nulux Network Solutions, and let’s traverse through the digital journey towards a sustainable, data-driven future together. Because at Nulux, your data is not merely transmitted; it is cared for, safeguarded, and facilitated through a network where every byte is crucial in crafting a sustainable future. Let's illuminate the path towards a robust, interconnected, and sustainable operational future, together. View Details

9-5/8 inch Halliburton TR-SCSSSV SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

Ball Valve Panel Mounted – 2-Way Male x Female End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

This 2-way panel-mounted ball valve with male x female connections is designed to control, start, or stop fluid flow in oil and gas piping systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or process bypasses.

The male x female connections allow secure inline installation and easy integration into existing piping without requiring additional fittings. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves need centralized access or where physical access to the pipeline is limited.

The valve features a floating ball design for leak-proof shut-off under high-pressure conditions. Operation is simple with a quarter-turn handle that provides fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Factory testing ensures seat and stem integrity, and the valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments.

View Details

LM2500+G4 SAC Gas Turbine

The Single Annular Combustor (SAC) version of the LM2500+G4 is designed for oil and gas applications that prioritize consistent performance, fuel flexibility, and emissions control—such as LNG facilities, gas processing plants, and pipeline compression, both onshore and offshore.

What makes the SAC version different is its simpler combustor design compared to dual annular or premix types. The SAC uses a through-flow, venturi swirler to ensure an even temperature profile at the turbine inlet, helping extend hot section life. It features individually replaceable fuel nozzles, a durable machined-ring liner, and a thermal barrier coating for better resistance to high temperatures and corrosion. This design supports both dry operation (with higher emissions) and water or steam injection to reduce NOx when needed—making it adaptable to site-specific emission regulations.

The LM2500+G4 SAC builds on the proven LM2500+ design, with approximately 10% more power. This gain comes from increased airflow, improved internal cooling, and material upgrades—while keeping the same number of compressor and turbine stages. The 17-stage high-pressure axial compressor and the basic engine layout remain unchanged, making it easy to maintain and service.

The engine can run on a wide range of liquid and gas fuels, allowing flexibility in remote or supply-constrained locations. It achieves up to 40% thermal efficiency in simple cycle mode. Water-injected operation enables NOx emissions as low as 25 ppm (gas) and 42 ppm (liquid).

In short, the LM2500+G4 SAC is well-suited for high-power mechanical drive and power generation in harsh or remote oil and gas environments, offering a balance of power output, fuel versatility, and emissions control.

View Details

Isolation Packer HP-2 Hydraulic Set 7" Packer

Setting Mechanism

The Ballycatter WC-HP-2 Isolation Packer is hydraulically set, meaning it is activated using tubing pressure rather than mechanical manipulation. During deployment, the packer is run into the wellbore as part of a stacked packer system, positioned above another hydraulic retrievable packer.

Once in place, hydraulic pressure is applied through the tubing, which compresses the packing element system, forcing it outward against the casing wall. Simultaneously, the slips engage to anchor the packer in position, ensuring a secure, pressure-tight seal within the isolation zone. The hydraulic setting eliminates the need for tubing rotation, making it particularly effective for deviated wells or conditions where mechanical manipulation is restricted.

Once set, the packer remains mechanically locked in place, independent of trapped hydraulic pressure. This design ensures that differential pressures, wellbore fluid movement, or thermal expansion and contraction do not compromise the seal, maintaining long-term zonal isolation. The packer can be used for treatment, injection, or production operations, providing a stable isolation barrier between zones for efficient fluid control and optimized reservoir management.

Retrieval Mechanism

The WC-HP-2 Isolation Packer is retrieved using a straight-pull shear release system, which allows for efficient and controlled removal without requiring tubing rotation.

When an upward force is applied to the tubing, the shear-release pins disengage, allowing the packing elements to relax and the slips to retract. This mechanical release mechanism ensures that retrieval forces remain unaffected by differential pressure, providing operators with a predictable and reliable method for packer removal.

For added flexibility, the shear-release force can be adjusted before running the packer to accommodate different well conditions.

The compact, debris-resistant design of the packer facilitates smooth retrieval, even in doglegged or deviated wells, reducing the risk of tool sticking.

By providing a simple, efficient release mechanism, the WC-HP-2 minimizes rig time and operational costs, making it a practical and cost-effective solution for multiple-zone completions and casing isolation applications.

View Details

Mesh Network Design and Installation

Pioneering Mesh Network Solutions for the Oil and Gas Industry: Nulux Leads the Way The oil and gas industry, characterized by its vast operations, challenging terrains, and the imperative for seamless communication, is a sector where reliable connectivity can make a profound difference. In this intricate web of operations, Mesh Network Design and Installation by Nulux Network Solutions emerges as the paramount solution for engineering professionals in the industry. Understanding Mesh Networks Unlike traditional Point-to-Point (P2P) or Multipoint configurations, mesh networks form a web of interconnected devices. Each node or device in this network is connected to multiple others, creating a network where information can take several paths to its destination. This interconnectedness ensures that even if one node fails, the network remains intact by rerouting data through other nodes, offering unparalleled reliability. Why Mesh Networks are a Game Changer for Oil and Gas Operations Robust Connectivity: Given the sprawling nature of oil and gas facilities, with sites spread across large geographic areas and often in remote locations, a mesh network ensures that there's no single point of failure. This robustness is crucial for operations where downtime can result in significant financial and operational setbacks. Scalability: As operations expand or evolve, mesh networks can be effortlessly scaled. With every new device acting as a node, the network becomes more resilient and extensive. Efficient Data Flow: With the capability to choose the quickest route for data transmission, mesh networks optimize the flow of information, ensuring timely decision-making and operational efficiency. Nulux's Expertise: Meshing Excellence with Experience Having an extensive background in various wireless infrastructures, Nulux Network Solutions has channeled its expertise into creating mesh network solutions that cater specifically to the challenges faced by the oil and gas industry. Customized Solutions: Recognizing that each operation is unique, our team tailors mesh network designs to align with the specific needs and challenges of each facility. End-to-End Service: From the initial design phase to the final installation, Nulux ensures that every aspect of the mesh network is handled with precision, ensuring optimal performance. Future-Ready: In an industry that's rapidly embracing digitization and smart technologies, our mesh networks are designed to be future-ready, compatible with emerging tech and capable of integrating with IoT devices and sensors. Driving Operational Efficiency with Wireless Solutions Beyond mesh networks, Nulux is committed to offering a comprehensive suite of wireless solutions. From designing Wireless Access Points (WiFi) that cater to bustling work environments to implementing secure and cost-effective Point-to-Point (P2P) networks, Nulux remains at the forefront of wireless tech, ensuring that the oil and gas sector is always one step ahead in its communication game. Conclusion In a sector where operational efficiency, safety, and timely decision-making are paramount, having a reliable communication network is non-negotiable. Nulux Network Solutions, with its cutting-edge Mesh Network Design and Installation services, offers the oil and gas industry a chance to revolutionize its communication infrastructure. Connect with us and let's chart a path to seamless connectivity together. View Details

Needle Valves Integral Bonnet Series – Tube OD – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Integral Bonnet Tube OD needle valves feature a one-piece construction where the bonnet is integrated with the valve body, eliminating welded joints and providing enhanced strength and safety. This design ensures durability and reliable performance in high-pressure applications, minimizing the risk of leaks or failures.

The Tube OD connections allow secure attachment to tubing while providing precise flow control, making these valves ideal for instrumentation lines, pressure measurement, and process control systems. The design supports consistent, repeatable shut-off and smooth operation, even under demanding conditions.

These valves are particularly suitable for oil and gas applications where high-pressure resistance, leak-free performance, and ease of maintenance are critical. Additional features such as rolled stem threads and mirror-finished stems reduce wear, lower operating torque, and extend service life, ensuring dependable operation in both standard and critical environments.

View Details

Tube Fittings Bore Through Male Connector NPT Thread – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Bore Through Male Connector NPT fittings are engineered to create robust, leak-free connections in high-pressure systems. These fittings feature a bore-through design, allowing fluid or gas to flow freely without obstruction, which minimizes pressure drop and ensures consistent system performance. Made from high-quality materials, they are suitable for pressures up to 6000 PSI and are manufactured to meet ASME B16.34, MSS-SP-99, and ASME B31.3 standards.

The NPT (National Pipe Thread) male connection ensures a tight seal when connected to compatible threaded components, providing reliable performance in oil and gas, chemical, and process industries. The fittings are precision-machined for proper ferrule deformation, which ensures leak-free connections under vibration, impulse, or vacuum conditions. Silver-plated threads reduce friction and prevent galling, while the bore-through design supports high flow rates without obstruction.

Bore Through Male Connector NPT fittings are easy to install and maintain. They are finger-tight for initial assembly and then wrench-tightened to achieve a secure seal, reducing installation errors and downtime. Their design allows disconnection and reconnection without compromising sealing integrity, making them suitable for applications requiring frequent maintenance or system modifications.

These fittings are unique in combining full-flow capability, high-pressure performance, and reliable sealing in a compact, easy-to-install form, making them ideal for demanding oil and gas systems, process lines, and high-pressure instrumentation setups.

View Details

5-1/2 inch Wireline Retrievable FXE SCSSV

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Ball Valve Panel Mounted – 2-Way Female x Female End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Panel Mounted Ball Valve, 2-Way Female × Female, is an isolation valve designed to control, start, or stop fluid flow in oil and gas piping systems. Its 2-way configuration allows flow in either direction between two ports, providing reliable on/off operation for process lines, sampling, injection systems, or bypass lines.

The female × female connections provide secure inline installation without the need for additional fittings, reducing potential leak points and simplifying system integration. The panel-mounted design enables operation from a control panel, making it suitable for applications where multiple valves are centralized or access to the pipeline is limited.

The valve features a floating ball design that ensures leak-proof shut-off under high-pressure conditions. Operation is achieved via a quarter-turn handle, which indicates flow direction and allows fast, low-torque control. The three-piece construction facilitates easy installation, maintenance, and replacement of internal components. It is factory tested for seat and stem leakage and is available in a range of corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs make it suitable for demanding industrial environments.

View Details

Wax Knife

Experience Unmatched Efficiency in Wellbore Cleaning with HOCA Oil Tools' Wax Knife In the highly specialized field of downhole operations, the quest for efficiency, precision, and reliability is ongoing. At HOCA Oil Tools, we understand the challenges faced by the oil and gas industry and are committed to providing solutions that not only meet but exceed these demands. A shining example of our commitment to innovation and quality is our Wax Knife, a pivotal tool designed for effective wellbore cleaning, particularly in the removal of paraffin buildup. HOCA’s Wax Knife: Tailored for Optimal Wellbore Maintenance The HOCA Wax Knife is expertly engineered to address the common yet critical issue of wax accumulation within wellbores. Crafted from premium materials and designed with precision, our Wax Knife ensures the thorough and efficient removal of wax, thereby maintaining optimal well performance. Ideal for a range of well conditions and compatible with various slick line diameters, the HOCA Wax Knife is a versatile tool essential for maintaining well integrity and flow. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with innovative and reliable downhole solutions. Our Wax Knife exemplifies this dedication, offering a blend of efficiency, effectiveness, and durability that is unmatched in wellbore maintenance. Integrating the HOCA Wax Knife into your downhole maintenance regimen is not just an investment in a tool but an investment in the continued productivity and safety of your operations. Our commitment to excellence ensures that each Wax Knife we deliver meets the rigorous demands of downhole environments and helps our clients achieve their operational objectives with greater ease and efficiency. Discover the difference that a HOCA Wax Knife can make in your downhole maintenance operations. Choose HOCA Oil Tools for your wellbore cleaning needs and experience the highest standards of quality, efficiency, and customer service in the industry. Step up your well maintenance game with HOCA Oil Tools’ Wax Knife – the key to maintaining optimal well performance and operational safety. Contact us today to learn more about how our downhole solutions can revolutionize your operations. View Details

Ball Valve Lever Operated – 2-Way Tube OD End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated – 2-Way Tube OD End Connection is a high-performance isolation valve designed to start, stop, or regulate fluid flow in oil and gas piping systems. Its 2-way configuration provides a simple and reliable method for controlling flow in a single pipeline, allowing full shut-off or bi-directional flow as needed in production lines, injection lines, sampling lines, or small-diameter process tubing.

The valve features tube OD (outer diameter) connections, which allow direct attachment to tubing without the need for additional fittings. This simplifies installation, reduces potential leak points, and is especially useful in compact piping layouts or systems where welded or threaded connections are impractical.

The floating ball design ensures consistent, leak-proof shut-off even under high-pressure conditions. Operation is simple and efficient with a quarter-turn lever, providing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, and replaceable seats and packings extend service life.

The valve is suitable for a wide range of oil and gas applications where reliable isolation and ease of installation are required.

View Details

3” Gas Fuel Isolation Valve

The 3” Gas Fuel Isolation Valve is a solenoid-pilot actuated sleeve-style valve designed specifically for aero-derivative gas turbines. It features a three-inch outlet flange and operates on dual voltage ranges of 24 or 95-140 VDC, providing flexibility for various power systems without compromising performance.

Constructed entirely from stainless steel, the valve complies with NACE standards for corrosion resistance, ensuring durability in harsh environments. It is engineered to withstand heat soak temperatures up to 300°F, making it suitable for high-temperature applications commonly found in turbine fuel systems.

Certified to CE-ATEX standards for Zone 2, Group IIA, Category 3, T3 temperature class, the valve is qualified for use in hazardous and explosive atmospheres, enhancing operational safety.

This valve acts as a critical safety device by isolating the fuel supply during emergency shutdowns or fuel system failures, preventing potential damage to the turbine. Typically deployed in pairs, it offers dual-redundancy to maintain safety even if one valve fails.

The valve is widely used in industrial gas turbine fuel systems where rapid and reliable fuel isolation is critical. Its design supports fast shutoff to prevent damage caused by fuel control failures or stuck throttle conditions. The valve’s durability and compliance with industry standards make it a dependable choice for maintaining operational safety in challenging environments.

View Details

SCSSSV Type NE 3-1/2 inch

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

6 5/8" HP-5 Hydraulic Set Production Packer 20-24 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details