Ballycatter.ca - Industrial Equipment

LM2500+G4 SAC Gas Turbine

The Single Annular Combustor (SAC) version of the LM2500+G4 is designed for oil and gas applications that prioritize consistent performance, fuel flexibility, and emissions control—such as LNG facilities, gas processing plants, and pipeline compression, both onshore and offshore.

What makes the SAC version different is its simpler combustor design compared to dual annular or premix types. The SAC uses a through-flow, venturi swirler to ensure an even temperature profile at the turbine inlet, helping extend hot section life. It features individually replaceable fuel nozzles, a durable machined-ring liner, and a thermal barrier coating for better resistance to high temperatures and corrosion. This design supports both dry operation (with higher emissions) and water or steam injection to reduce NOx when needed—making it adaptable to site-specific emission regulations.

The LM2500+G4 SAC builds on the proven LM2500+ design, with approximately 10% more power. This gain comes from increased airflow, improved internal cooling, and material upgrades—while keeping the same number of compressor and turbine stages. The 17-stage high-pressure axial compressor and the basic engine layout remain unchanged, making it easy to maintain and service.

The engine can run on a wide range of liquid and gas fuels, allowing flexibility in remote or supply-constrained locations. It achieves up to 40% thermal efficiency in simple cycle mode. Water-injected operation enables NOx emissions as low as 25 ppm (gas) and 42 ppm (liquid).

In short, the LM2500+G4 SAC is well-suited for high-power mechanical drive and power generation in harsh or remote oil and gas environments, offering a balance of power output, fuel versatility, and emissions control.

View Details

Data Strategy

Transforming Businesses Through Data Strategy Consulting: Unlock Your Data's Full Potential In today's data-driven world, businesses thrive by harnessing the power of data. But how do you navigate this landscape to make smart decisions that drive success? Enter ELEKS' Data Strategy Consulting – a comprehensive solution that combines design, implementation, and provisioning support to help you harness the full potential of your data. Empowering Data-Driven Success: Harness Data for Informed Decisions: Our expert data team lays the groundwork for effective data analysis. Gain insights into customer behaviors, scenarios, and value points, allowing you to make well-informed decisions that add real value. Enhance Operational Efficiency: Say goodbye to duplicated workloads. Our data strategy consultants streamline data management processes across your organization, freeing up your team to focus on your core business. Create New Revenue Streams: Monetize your data to tap into new revenue opportunities. Embed data into your products, services, or even sell it to your customers. This not only enhances customer experience but also boosts brand loyalty and drives sales. Ensure Compliance and Security: Data privacy and security are paramount. Our consultants meticulously plan enterprise data management projects, ensuring data safety through provisioned access and auditing. Streamline Cross-Department Collaboration: Facilitate collaboration between departments by defining clear processes and data management rules. Enhance access to data, fostering collaboration and maintaining peak performance. Navigating Data Strategy Success: Designing Data Strategy: 1. AS-IS Analysis: Our data strategy journey starts by assessing your current data landscape. We identify components, users, and potential limitations, evaluating data processes' maturity, security standards, and more. 2. TO-BE Analysis: Crystalize your future digital strategy. Define success criteria and objectives, merging data analytics with business goals to determine achievable milestones and ambitious targets. 3. Transition Planning: Prioritize value vs. complexity and create a tailored roadmap. Develop a blueprint that includes timelines, milestones, resources, and metrics, while assessing dependencies and risks. Executing Data Strategy: End-to-End Guidance: Our experts support your strategy's implementation, drawing from a pool of skilled engineers and data scientists. We ensure your project aligns with your company's needs. Implementation Support: Seamlessly roll out your data strategy company-wide. We monitor progress using pre-defined metrics and KPIs to ensure successful deployment. Key Deliverables of Enterprise Data Strategy: Our comprehensive approach includes assessing existing practices, decision-making processes, and data architecture. The result? A detailed plan that incorporates performance targets and strategies for moving forward. Why Choose ELEKS for Your Data Strategy: End-to-End Support: ELEKS provides comprehensive support, from design to implementation. Our data strategy consultants offer the full spectrum of services to help you achieve your goals seamlessly. Specialist Expertise: Gain insights from award-winning specialists in domains like data science, DevOps, and cybersecurity. We tailor solutions to your unique needs, ensuring total confidence in your data strategy. Scalable Platforms for Automation: Data Science Platform (eDSP): Our proprietary platform streamlines the design and management of machine learning models. eDSP, based on Kubernetes, enables rapid delivery of data analytical initiatives and significant cost savings. Compliance Automation Platform: Automate compliance efforts in regulated sectors, reducing costs and managing changes in regulations with ease. Seamless integration via RESTful API ensures effortless adoption. ELEKS: Your Partner in Data Transformation: In a world driven by data, ELEKS' Data Strategy Consulting unlocks limitless possibilities. Make informed decisions, enhance efficiency, and create new revenue streams with confidence. Embrace the power of data-driven success today – because your data's potential is boundless. View Details

MS-201 Multistage Steam Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

ROV Communications Systems

Stay Connected with Poseidon Robotics' Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. At Poseidon Robotics, we understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration At Poseidon Robotics, we pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation, Poseidon Robotics is your trusted partner in the subsea robotics industry. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with Poseidon Robotics' advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. Stay connected, stay successful with Poseidon Robotics! View Details

Stand off Protector

GPS Leasing

Lease GPS Systems with CWB National Leasing: The Road to Business Success In today's fast-paced business landscape, staying ahead of the competition requires efficiency, flexibility, and smart financial decisions. One way savvy business owners are achieving this is by leasing GPS systems through CWB National Leasing. If you're ready to supercharge your business and increase your profits, you've come to the right place. Here's why you should consider leasing GPS systems with us: Get Your Equipment Fast Time is of the essence in business, and we understand that. When you choose to lease GPS systems with CWB National Leasing, you can expect a lightning-fast process. We'll review your application promptly and provide a decision on your lease within 48 hours of your approval. That's right; in just two days, you'll have the green light to acquire the GPS equipment you need. Once approved, we'll notify your chosen equipment dealer, and you can sit back and wait for the delivery of your equipment. Our commitment to swift service ensures that you can start using your GPS systems without unnecessary delays. Increase Buying Power Leveraging your buying power is a key advantage of leasing GPS systems. Rather than making a substantial upfront purchase, you can free up cash by opting for periodic lease payments. This approach allows you to allocate your capital to other critical areas of your business. What's more, with CWB National Leasing, you have the option to add extra features or accessories to your GPS equipment for a small payment increase. It's a strategic way to customize your equipment to meet your specific needs without breaking the bank. With our leasing solutions, you'll truly put the "POW" in buying power! Control Your Cash Flow Effective cash flow management is essential for any business. When you choose to lease GPS systems, you'll benefit from small, manageable payments spread over the lease term. This means your equipment will begin earning you money while you pay it off. The ability to align your expenses with revenue generation makes it easy to maintain a healthy expense-to-revenue ratio. It's a smart financial strategy that allows you to stay in control of your cash flow while reaping the benefits of GPS technology. Seasonal Payment Options At CWB National Leasing, we understand that every business has unique financial cycles. That's why we're all about flexibility. Our leasing solutions are designed to match your revenue patterns. Whether you prefer seasonal, semi-annual, or annual payments, we can structure your lease to align with your business's cash flow. This tailored approach ensures that your GPS system lease remains convenient and sustainable throughout the year. Potential Tax Savings Leasing GPS systems can offer your business potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax benefits rather than depreciating the capital cost of equipment. To fully understand how leasing can benefit the tax position of your business, we recommend consulting your tax advisor. They can provide insights into the specific advantages that leasing GPS systems can offer your unique financial situation. In conclusion, leasing GPS systems with CWB National Leasing is a strategic decision that can help your business thrive. From fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business for success. Take the road to business success with CWB National Leasing today! View Details

Excavators Leasing

Accelerate Your Construction Projects with Excavator Leasing from CWB National Leasing Enhance Your Operational Efficiency and Financial Flexibility In the dynamic world of construction, having access to advanced equipment like excavators is key to staying competitive and efficient. Leasing your excavator through Canadian Western Bank (CWB) National Leasing offers a versatile and financially astute solution that aligns with your project needs and budget. Here’s how leasing an excavator can be a game-changer for your construction business: 1. Swift Equipment Delivery CWB National Leasing prioritizes speed and efficiency. They review your application promptly and typically notify your equipment dealer about the payment within 48 hours of approval. This rapid process means your excavator can be delivered and operational in no time, keeping your projects on track. 2. Boosted Purchasing Power With CWB National Leasing, you can enhance your financial leverage. Opt for manageable periodic payments instead of a large upfront cost, freeing up capital for other critical business needs. Plus, the flexibility to add extra features or accessories to your excavator with a minor increase in payments further enhances its utility and efficiency. 3. Balanced Cash Flow Management Leasing an excavator allows for smaller payments over the term of the lease, enabling the equipment to start generating revenue while you're still paying for it. This approach helps maintain a favorable balance between your expenses and income. 4. Adaptable Payment Plans CWB National Leasing offers tailor-made payment options, including seasonal, semi-annual, or annual plans, to align with your business's cash flow. This adaptability is especially crucial in the construction industry, where income can vary based on project timelines. 5. Potential Tax Advantages Leasing can offer significant tax benefits, such as allowing you to expense lease payments rather than capitalizing the cost of the excavator. It's advisable to consult with a tax advisor to understand how leasing can improve your business’s tax position. Conclusion Opting to lease an excavator through CWB National Leasing is a strategic decision that empowers your construction business with the right tools while maintaining financial agility. It enables you to deploy state-of-the-art excavators in your projects while managing your finances effectively, paving the way for enhanced efficiency, growth, and profitability in the competitive construction market. View Details

Stickwelder 5001C Series

Inverter and Charger Combination

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue View Details

A-3 LOK SET Packer

The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer. View Details

Pipeline Pipe Inventory and Inspection Tracking

Streamlining Pipeline Pipe Inventory and Inspection Tracking with PipeDNA: Enhancing Efficiency in the Oil and Gas Industry Efficient management of pipeline pipe inventory and inspection tracking is crucial for the smooth operation of the oil and gas industry. Introducing PipeDNA, a state-of-the-art cloud-based platform designed to streamline the management of pipe and tube throughout the entire supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage pipeline pipe inventory, increase visibility, and optimize inspection processes. Comprehensive Inventory and Tracking: PipeDNA provides a comprehensive inventory management and tracking system for pipelines, enabling stakeholders to have a real-time view of their pipeline assets. From monitoring utilization and activity to analyzing trends, the platform equips stakeholders with valuable insights to make informed decisions about their pipeline pipe inventory. With enhanced visibility, stakeholders can optimize inventory levels, minimize downtime, and maximize resource utilization. Efficient Logistics Management: Managing the logistics of pipelines can be complex, but PipeDNA simplifies the process by offering robust logistics management features. Stakeholders can efficiently handle shipments, track the status of pipeline pipe in transit, and streamline documentation processes. Additionally, the platform facilitates pipe bundling, ensuring efficient grouping and transportation of pipeline pipe, leading to cost savings and improved operational efficiency. Streamlined Inspection Management: PipeDNA's inspection management capabilities extend to pipelines, allowing stakeholders to effectively manage inspection jobs across multiple sites. The platform enables seamless coordination, tracking of job statuses, and management of inspection profiles. By centralizing inspection data and streamlining workflows, PipeDNA optimizes the inspection process, ensuring compliance with industry standards and mitigating risks associated with pipeline integrity. Enhanced Identification and Traceability: PipeDNA's identification and traceability features enable quick and reliable identification of pipeline pipe, providing comprehensive details, activity history, and traceability documentation. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating easy tracking and identification of individual pipelines. By enhancing identification and traceability, PipeDNA strengthens quality control measures, streamlines recalls if necessary, and supports compliance with industry regulations. Seamless Integration of Manufacturing Data: PipeDNA seamlessly integrates manufacturing data into its platform, eliminating the need for manual data entry and reducing the risk of human errors. This integration ensures that pipeline-related data, including manufacturing details, is readily available within the system. By automating the transfer of manufacturing data, PipeDNA enables stakeholders to maintain accurate and reliable records, facilitating efficient pipeline pipe management and data-driven decision-making. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to optimize pipeline pipe inventory and inspection tracking. The platform supports barcoding and labeling systems, integrating popular barcode standards such as UPC, EAN, and QR codes. Additionally, PipeDNA is RFID ready, enabling stakeholders to seamlessly integrate RFID technologies such as labels and asset tags for efficient tracking and management of pipelines. Furthermore, the platform supports IoT data integrations using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced pipeline pipe management processes. PipeDNA revolutionizes pipeline pipe inventory and inspection tracking in the oil and gas industry, providing stakeholders with a powerful cloud-based solution. By offering comprehensive inventory and tracking capabilities, efficient logistics management, streamlined inspection processes, enhanced identification and traceability, and seamless integration of manufacturing data, PipeDNA empowers stakeholders to maximize efficiency and productivity. Embrace PipeDNA and experience the benefits of improved pipeline pipe management, increased visibility, and optimized operations in the oil and gas supply chain. View Details

Gas Tight Casing Patch GTX-SPAN

Looking for a heavy-duty, permanent solution for sealing splits, holes or perforations in your tubing and casing? Look no further than the GTX-SPAN System Tubing/Casing Patch from ID OILTOOLS! Our GTX-SPAN System is the first effective gas tight patch on the market, thanks to the premium sealing elements in each component. Each element contains two elastomer seals, providing superior gas shut off capabilities. The GTX-SPAN System is incredibly versatile, and can be run on electric wireline, tubing, or coil tubing, and set with a pressure setting tool (electrical, mechanical, or hydraulic). The large bores ensure easy passage of tools and equipment, minimizing restriction to fluid flow. Customizable for most well applications, including premium alloys, restrictions, and geothermal well applications, our GTX-SPAN System Tubing/Casing Patch is the solution you need for your sealing needs. Our system consists of three basic components: a top metal element with an expandable elastomer seal, a tubular extension, and a bottom metal element with an expandable elastomer seal. Various patch lengths can be obtained by adding tubular extensions, making it a modular and versatile solution for any well. During the setting process, the pressure setting tool exerts a pushing force on the top tapered metal swage and a pulling force on the bottom tapered metal swage. Both swages are driven into the metal sealing elements (with expandable elastomer seals), which expand outward into the casing wall, providing both a metal-to-metal and an elastomer seal. At a predetermined force, a calibrated weak point shears, and the setting process ceases. A collapsible setting collet located in the bottom swage retracts and allows the setting equipment to be retrieved. The interval is now fully isolated with metal and expandable elastomer seals. ID OILTOOLS highly recommends the use of a casing scraper before patch installation to rid the interval of foreign matter and the use of a casing caliper to provide an accurate record of casing I.D. and conditions. A gauge ring or drift run is a minimum requirement. Choose the GTX-SPAN System Tubing/Casing Patch from ID OILTOOLS for the first effective gas tight patch on the market. Contact us today to learn more! View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

SP TR-SCSSSV 2-3/8 inch

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

KWIK Control Line and Cable Protector

7" Mech-2 Double Grip Mechanical Set Packer for 38 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

RF Communication Solutions

Empowering the Oil and Gas Sector with Nulux’s Robust RF Communication Solutions Navigating through the complex and often unpredictable terrain of the oil and gas industry demands a communication infrastructure that is not only steadfast but also adaptive to the unique challenges this field brings. Nulux Network Solutions, leveraging its profound knowledge in wireless communication technology, stands at the forefront of providing Radio Frequency (RF) communication solutions that are not only reliable but also tailor-made for the intricacies of your operations. Breaking Through Boundaries with Nulux’s Wireless Proficiency With the mission of maintaining the momentum in fast-paced working environments, our team at Nulux ensures your operations are supported by wireless networks that are not only resilient and secure but also robust enough to cater to every spectrum of your business - from the office to the very heart of your field operations. The Power of Point-to-Point Networks A P2P network offers a dedicated communication pathway between two distinct points, providing a secure, reliable, and efficient medium for data transmission. Particularly for the oil and gas industry where data security is paramount, a P2P network safeguards your critical data, transmitting it securely across your private network, shielding it from potential external threats, and thereby ensuring the continuous and unhindered flow of information. Multipoint Networks: Connecting Every Operational Node Multipoint configurations, connecting more than two points via a shared line, are invaluable in scenarios demanding comprehensive centralized data access, ensuring every operational node is perpetually connected and synchronized, irrespective of the geographical disparities amongst them. Advantages at a Glance Increased Productivity: Ensuring the continuous availability of critical centralized files for every operational node, irrespective of geographical positioning. Robust Security: Through private networks, safeguarding your data against potential interception and ensuring it traverses securely across your operational matrix. Cost-Effective: When conventional hard-line connections are logistically or financially unviable, our wireless solutions present an economical alternative without compromising on functionality or reliability. Nulux’s RF Communication Solutions: A Beacon of Reliability in a Sea of Uncertainty Our commitment to staying ahead in the ever-evolving domain of wireless technology ensures your operations are always supported by state-of-the-art RF communication solutions. These solutions are not merely communication networks but are strategic assets, enhancing operational efficiency, safeguarding critical data, and ensuring every node of your operation is continuously and reliably connected. In the intricate and unpredictable realm of the oil and gas industry, ensuring the reliability, security, and efficiency of your communication networks is not merely beneficial but is paramount. Through Nulux’s RF communication solutions, your operations are not only empowered with robust communication networks but are also endowed with a strategic ally, ensuring your operational matrix is perpetually connected, your data transmissions are secure, and your communication networks are reliable and steadfast. Seamlessly integrate Nulux’s RF Communication Solutions into your operational matrix and ensure your operations are always connected, always secure, and perpetually empowered with robust and reliable communication networks. Connect with Nulux today and navigate through the complexities of the oil and gas sector with the assurance of robust, reliable, and secure communication networks. View Details

Offshore Slickline Unit

Revolutionizing Offshore Operations: The Pinnacle of Slickline Services by InWaTec Combined In the dynamic world of oil and gas extraction, offshore platforms are the frontiers of human engineering prowess, and InWaTec Combined stands as a beacon of innovation in well intervention services. Our Offshore Slickline Unit represents the cutting-edge culmination of technology and expertise, designed to ensure the seamless operation of your offshore wells. The Essence of Slickline Operations At the heart of our service is the slickline operation, a critical aspect of well maintenance and testing. Utilizing a single strand wire, known for its robustness and simplicity, our operators skillfully navigate downhole tools through the wellbore's demanding environment. From bailers to pulling tools, stems to running tools, our slickline is the lifeline that facilitates precise interventions within oil and gas wells. Versatility at Depth Slickline's single strand wire is more than just a cable; it's a versatile tool in its own right. Whether it's deploying valves, installing plugs, or adjusting pressure regulators, slickline operations by InWaTec Combined can handle a multitude of tasks with finesse. Our operators are trained to execute complex retrievals and installations, ensuring that your well's performance is optimized at all times. Tailored for the Offshore Challenge Understanding the unique challenges of offshore operations, our services are tailored to meet the demands of Mobile Offshore Drilling Units (MODUs), Light Intervention Vessels (LIVs), and stationary offshore platforms. Our slickline units are engineered to withstand the harshest marine conditions, delivering reliable performance where it matters most. A Commitment to Excellence InWaTec Combined's Offshore Slickline Unit services are underpinned by our unwavering commitment to excellence. We are not just service providers; we are partners in your quest for operational efficiency and resource maximization. With our slickline services, we promise not just to meet but to exceed the high standards of the oil and gas industry’s offshore sector. In conclusion, InWaTec Combined is not just facilitating well interventions; we are redefining them. Our Offshore Slickline Unit services are a testament to our dedication to excellence and our unrelenting pursuit of technological advancement. Let us take your offshore operations to new depths of success. View Details

Lock Mandrels for Tubing

Unlocking Efficiency: HOCA Oil Tools' Lock Mandrels for Tubing In the demanding realm of oil and gas operations, ensuring the integrity and functionality of well components is paramount. HOCA Oil Tools, a pioneer in downhole slick line tools, introduces its cutting-edge Lock Mandrels for Tubing – an essential solution designed to enhance the performance and reliability of downhole activities. These tools are engineered for precision, delivering unmatched reliability and performance to meet the rigorous demands of modern well operations. HOCA's Lock Mandrels for Tubing: Precision-Engineered for Superior Performance Our Lock Mandrels for Tubing are designed to securely latch into the tubing string, providing a stable base for various downhole tools and devices. Tailored to accommodate different tubing sizes and pressures, they are essential for the effective management and control of wellbore fluids. Fabricated from high-quality materials and built to withstand the harshest downhole environments, HOCA's Lock Mandrels ensure operational success and longevity. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Lock Mandrels for Tubing means choosing a partner committed to your operational success. Our dedication to quality and innovation ensures that our products not only meet but exceed the expectations set by the demanding oil and gas industry. Incorporating our Lock Mandrels into your tubing operations signifies a step towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just equipment; you gain a strategic advantage supported by our expertise and unwavering commitment to excellence. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who rely on our Lock Mandrels for Tubing to secure their operational success. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole activities. With HOCA Oil Tools, empower your downhole operations with tools that redefine reliability, efficiency, and performance in the oil and gas industry. View Details

Radios Leasing

Ambient Storm Choke Valve 4 1/2 inch

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Nitrogen Generator System

Introducing Sivam's Nitrogen Generator: The Ultimate Solution for Nitrogen Generation on the Go! This state-of-the-art unit utilizes PSA Column technology to generate gas phase nitrogen of specified quality levels at any field location. It's the perfect solution for industries that require a reliable source of nitrogen in remote locations, without the hassle of transporting and storing nitrogen cylinders. Sivam's Nitrogen Generator is designed with portability and convenience in mind. With its compact size and easy-to-use interface, it can be set up quickly and easily on any job site. Whether you're in the oil and gas industry, electronics manufacturing, food packaging, or any other industry that requires high-purity nitrogen, Sivam's Nitrogen Generator is the ideal choice. One of the key benefits of Sivam's Nitrogen Generator is its advanced PSA Column technology. This technology enables the unit to separate nitrogen from the air using a carbon molecular sieve, providing a reliable source of nitrogen gas at a specified purity level. This means you can be confident in the quality of the nitrogen you're generating, no matter where you are. In addition, Sivam's Nitrogen Generator is designed for efficiency and cost-effectiveness. With its low power consumption and minimal maintenance requirements, it's a cost-effective alternative to traditional nitrogen sources. And because it's a self-contained unit, there's no need to worry about transporting and storing nitrogen cylinders, saving you time and money. Overall, Sivam's Nitrogen Generator is the ultimate solution for nitrogen generation on the go. With its advanced technology, ease of use, and cost-effectiveness, it's the perfect choice for industries that require a reliable source of nitrogen gas, no matter where they are. Contact us today to learn more about Sivam's Nitrogen Generator and how it can benefit your business. View Details

Document Management / Document Control / ECMS / EDMS Platform

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available. View Details

E-Procurement Platform

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available. View Details

External Dimple Connector for Coiled Tubing

Introducing the Revolutionary EDC (External Dimple Connector) from Marlin Oil Tools: The Essential Link for Coiled Tubing Applications in the Oil and Gas Industry Marlin Oil Tools proudly presents our state-of-the-art EDC (External Dimple Connector), a groundbreaking solution designed to seamlessly integrate the smooth lower end of coiled tubing (CT) with any requisite downhole tool for efficient well intervention operations. The EDC stands out in the oil and gas sector for its innovative design and unparalleled reliability, making it a must-have for your well intervention toolkit. Key Features of the EDC (External Dimple Connector): Seamless Integration: The EDC provides a flawless connection between the smooth-walled end of the CT and the threaded interface of downhole tools, ensuring a secure and efficient link for well intervention jobs. Advanced Connection Mechanism: Equipped with a unique holes matrix in the upper housing, the EDC utilizes set screws installed in precision-pressed dimples, offering a robust and reliable connection without compromising the integrity of the coiled tubing. Threaded Lower Part: The connector's lower portion features a meticulously designed thread for attaching any downhole tool, facilitating a versatile and adaptable solution for various well intervention needs. High-Performance Sealing: Installation of the EDC is enhanced with two O-rings made from the durable FKM 90 material, providing a high-integrity seal between the internal space of the connector and the annulus, ensuring operational safety and efficiency. Effortless Installation: The EDC can be effortlessly installed using a dimple tool, capable of mechanical or hydraulic pressing, simplifying the assembly process and minimizing downtime during critical operations. At Marlin Oil Tools, we understand the complexities and challenges of well intervention in the oil and gas industry. Our EDC (External Dimple Connector) is designed to address these challenges, offering a reliable, efficient, and high-quality connection solution for coiled tubing operations. Whether you are conducting routine maintenance, stimulation, or any other well intervention job, the EDC ensures a seamless, secure, and effective operation. Why Choose Marlin Oil Tools' EDC? Unmatched Reliability: Engineered for durability and performance, the EDC withstands the harsh conditions of downhole operations, ensuring reliability when it matters most. Versatility: Compatible with a wide range of downhole tools, the EDC offers unparalleled flexibility for your well intervention needs. Quality Assurance: At Marlin Oil Tools, quality is at the forefront of everything we do. The EDC is manufactured to the highest industry standards, ensuring peak performance and safety. Elevate your coiled tubing operations with the EDC (External Dimple Connector) from Marlin Oil Tools. Contact us today to learn more about how our innovative solutions can enhance your well intervention strategies and drive operational success. View Details

Bailer Sampling

InWaTec Combined: Streamlining Wellbore Clarity with Premier Sample Bailer Services In the ever-evolving landscape of drilling and production, the importance of maintaining a clean wellbore is paramount. At InWaTec Combined, we understand that the efficiency of your operations hinges on the clarity of the wellbore. That's why we offer comprehensive Sample Bailer running services, designed to support operations on drilling rigs, during workover operations, and in production wells, whether onshore or offshore. Optimizing Wellbore Integrity with Bailing Operations Bailing operations are a critical component of wellbore maintenance, aimed at collecting solids and cleaning the wellbore to ensure uninterrupted operations. InWaTec Combined's Sample Bailer services are tailored to meet the needs of any operation, providing a thorough cleansing of the wellbore and collection of solids that could otherwise impede production or damage equipment. Adaptable Services for Diverse Environments Whether it's the dynamic environment of offshore rigs or the structured demands of onshore wells, InWaTec Combined's Sample Bailer services are adaptable to any setting. Our equipment and expertise are suited to the unique challenges presented by both drilling and production phases, ensuring that we provide optimal solutions regardless of the environment. Leveraging Technology for Efficient Operations At InWaTec Combined, we utilize the latest technology in our Sample Bailer running services. This approach allows us to efficiently collect wellbore debris and samples, minimizing downtime and maximizing the productivity of the well. Our commitment to technological advancement means that we continuously improve our services to stay at the forefront of the industry. Safety and Environmental Stewardship We prioritize safety and environmental stewardship in all our operations. Our Sample Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of eco-friendly operations, especially in sensitive onshore and offshore locations. InWaTec Combined’s Commitment to Excellence Choosing InWaTec Combined for your bailing needs means partnering with a company that is committed to excellence. Our Sample Bailer running services are designed to deliver results with precision, safety, and environmental responsibility at the forefront. We are dedicated to providing services that not only meet but exceed industry standards. Conclusion: Your Clear Choice for Clear Wells In summary, InWaTec Combined’s Sample Bailer running services represent the highest standard in wellbore cleaning and sample collection. With our advanced technology, adaptable services, and unwavering commitment to safety and the environment, we are your clear choice for ensuring the integrity and productivity of your wells. Trust InWaTec Combined to deliver clarity and quality to your wellbore operations. View Details

Gas Blow-Off Valve 24 VDC

The 3” Gas Fuel Isolation Valve is designed for use in industrial gas turbines within the oil and gas sector, serving as a vital safety and control device. It regulates the flow of natural gas or compressor discharge air to the turbine, enabling quick isolation of fuel supply during abnormal or emergency conditions to protect the turbine from damage.

This valve features a three-inch outlet flange and is solenoid-pilot actuated, operating on 24 or 95-140 VDC power. It is engineered to withstand high-pressure environments, with natural gas operation rated up to 900 psig and compressor air up to 640 psig. It also endures elevated temperatures, tolerating heat soak conditions up to 400°F for natural gas and up to 800°F for compressor air applications.

Constructed from stainless steel materials compliant with NACE standards, the valve resists corrosion in harsh operating conditions typical in oil and gas facilities. It meets strict safety certifications, including CE-ATEX Group IIA, Category 3, Zone 2, T3, making it suitable for use in potentially explosive atmospheres.

The valve operates with a rapid opening time of approximately 110 milliseconds and closes within 1 second, enabling prompt response to operational changes or emergency shutdown signals. Typically installed in pairs to provide dual-redundancy, these valves enhance system safety by ensuring backup isolation capability.

Overall, the 3” Gas Fuel Isolation Valve is essential for maintaining safe, efficient, and reliable turbine operation by controlling and isolating fuel or air flow, thereby preventing damage and reducing the risk of costly downtime in oil and gas power generation applications.

View Details

Packing O-Ring for Gas Turbine

The Packing O-Ring is a sealing made from durable fluorocarbon rubber, designed for use in high-temperature and chemically harsh environments. Commonly used in gas turbines such as the LM2500 series, it provides a tight seal between components to prevent the leakage of fluids or gases.

This O-ring has an inside diameter of 27/64 inches, a thickness of 5/64 inches, and a hardness of 75 Shore A. It is built to handle operating temperatures from -20°F to 400°F, making it suitable for sealing joints in systems exposed to fuels, oils, and high pressures.

Its compact size and resistance to compression set and fluid exposure make it ideal for use in shafts, housings, and valve assemblies where reliable sealing is critical to turbine performance and safety.

View Details

SCSSSV Type NE 3-1/2 inch

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

Premier Removable Production Packer

The Premier™ packer is a hydraulic-set, large-bore, removable production packer. It combines the performance of a permanent packer with the conveniences of a retrievable packer. The Premier is ideally suited for big-bore completions and multizone stacked-packer completions. Its retrieving options offer new alternatives in high intervention cost applications. We can source from current stock or direct from the manufacturer. View Details

X-over Protector

Positive Displacement Motor for Coiled Tubing Applications

Introducing the PDM (Positive Displacement Motor) from Marlin Oil Tools: The Ultimate Downhole Tool for Enhanced Coil Tubing Operations Marlin Oil Tools is proud to unveil the PDM (Positive Displacement Motor), a revolutionary downhole tool designed to maximize efficiency in coil tubing operations across the oil and gas industry. Engineered to convert the flow energy of pumping fluid into rotational force, the PDM is essential for a range of operations, from milling and cleanouts to supporting mechanical tubing cutters and Venturi junk baskets. Key Features of the PDM (Positive Displacement Motor): Energy Conversion: The PDM's main function is to transform pumping fluid energy into the rotation of the bearing mandrel, optimizing the performance of downhole tasks. Versatile Applications: Ideal for milling, cleanout operations, and as a driving force for mechanical tubing cutters and Venturi junk baskets, enhancing operational flexibility. Dual-Section Design: Comprises a robust bearing section and a power section, each designed to withstand the demands of downhole environments. Innovative Power Section: Features a stator with an inner spiral surface and a rotor with an outer spiral surface, ensuring efficient energy conversion and consistent torque. Continuous Tool Rotation: Guarantees that any tool installed below the motor receives continuous rotation, improving operational efficiency and effectiveness. Optimized for Coil Tubing: Specifically tailored for integration into the BHA during coil tubing operations, ensuring seamless performance and reliability. Elevate your coil tubing operations with the PDM (Positive Displacement Motor) from Marlin Oil Tools, a cutting-edge solution designed to transform fluid energy into mechanical rotation, optimizing downhole tasks. Whether it's milling, cleanouts, or supporting other downhole tools, the PDM enhances operational flexibility and efficiency. With its innovative power section and robust bearing assembly, the PDM ensures consistent tool rotation and performance, making it an indispensable tool for the oil and gas industry. Choose the PDM from Marlin Oil Tools for unparalleled efficiency and reliability in your downhole operations. Why Choose the PDM from Marlin Oil Tools? Enhanced Milling and Cleanout Efficiency: Specifically engineered to boost performance in critical downhole tasks. Broad Operational Flexibility: Compatible with a variety of tools and tasks, ensuring adaptability to your operational needs. Reliable Performance: Designed with durable components that guarantee consistent operation and longevity. Seamless Integration: Easily integrates into your existing BHA setup, providing a smooth operation during coil tubing interventions. The PDM (Positive Displacement Motor) by Marlin Oil Tools represents the forefront of downhole tool technology, offering oil and gas operators a powerful tool for improving efficiency and outcomes in well interventions. Incorporate the PDM into your operations to achieve superior results and operational excellence. View Details

Lead Impression Block

MC Injection Safety Valve 3-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Junk Basket - Valve Catcher

7" Mech-1 Single Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

5 1/2" HP-6 Hydraulic Set High Angle Production Packer for 14-20 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Demolition equipment Leasing

Revolutionize Your Demolition Projects with Equipment Leasing from CWB National Leasing Unleash the Power of Flexibility in Your Demolition Business In the demolition industry, having the right equipment is crucial for efficiency and success. Leasing your demolition equipment through Canadian Western Bank (CWB) National Leasing offers a smart solution that aligns with your business goals and financial strategy. Here's how leasing demolition equipment can propel your business forward: 1. Quick Access to Equipment CWB National Leasing values your time. They ensure a rapid review of your application, often making a decision within 48 hours. This means you can have your demolition equipment delivered swiftly after approval, minimizing downtime and accelerating project commencement. 2. Increased Financial Leverage Leasing with CWB National Leasing enhances your buying power. It allows you to acquire the necessary equipment through manageable periodic payments, rather than a substantial upfront cost. This approach frees up capital for other investments and enables you to add extra features or accessories to your equipment with minimal additional expense. 3. Control Over Cash Flow With smaller, spread-out lease payments, your demolition equipment starts contributing to your business’s revenue while it's being paid off. This strategy helps maintain a healthy balance between your expenses and income, crucial for business stability and growth. 4. Adaptable Payment Plans CWB National Leasing offers flexible payment options tailored to your business’s revenue cycle, including seasonal, semi-annual, or annual structures. This flexibility is particularly beneficial for businesses with fluctuating income. 5. Potential Tax Benefits Leasing can offer tax advantages by enabling you to expense lease payments instead of capitalizing the equipment cost. Always consult with a tax advisor to explore how leasing can optimize your business’s tax position. 6. Customized Payment Structures CWB National Leasing understands that no two businesses are the same. They offer customized leases that align with your specific cash flow, ensuring the terms fit your unique business model. 7. Diverse Buyout Options A variety of buyout options are available at the end of your lease, ranging from a nominal amount to up to 50% of the total equipment cost. This flexibility allows for potential ownership of your demolition equipment. 8. Fair Market Value and Flexible Payments You can defer a portion of the equipment’s cost to the lease's end, with options to purchase at fair market value or upgrade. Step-up or step-down payment options are also available if your business anticipates changes in cash flow. 9. Seasonal Payment Adjustments For businesses with seasonal revenue patterns, CWB National Leasing can tailor a payment cycle to match, such as a six-month-on, six-month-off schedule. Conclusion Leasing your demolition equipment through CWB National Leasing is a strategic decision that offers financial flexibility and operational efficiency. It allows you to stay competitive in the demolition industry by using state-of-the-art equipment while managing your finances effectively, setting your business up for sustainable growth and profitability. View Details

Gas Lift Kickover Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Kickover Tools In the highly specialized realm of oil and gas production, achieving operational precision and efficiency is critical. HOCA Oil Tools responds to this need with our superior line of Kickover Tools, specifically designed to enhance gas lift operations and optimize production rates. Our Kickover Tools are engineered to facilitate the precise installation and retrieval of side pocket mandrels and other downhole control devices, ensuring seamless well performance and maximizing production. HOCA's Kickover Tools: Engineered for Excellence HOCA Oil Tools' Kickover Tools are the epitome of innovation in downhole technology. Designed for compatibility with a range of wellbore sizes and specifications, our tools are crafted to offer unmatched precision, durability, and ease of use. Whether you are installing new equipment or retrieving existing devices, our Kickover Tools provide the reliability and efficiency needed for successful downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ Kickover Tools means opting for a brand synonymous with quality, innovation, and reliability. Our commitment to excellence ensures that our products meet the high standards demanded by the oil and gas industry, providing our clients with the tools they need to succeed in their downhole operations. By integrating our Kickover Tools into your operational toolkit, you gain not just superior downhole equipment but also a strategic advantage in your production operations. With HOCA Oil Tools, you partner with a company dedicated to supporting your success with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Kickover Tools to enhance their operational efficiency and well performance. Partner with us, and harness the power of advanced downhole solutions designed for success. With HOCA Oil Tools, elevate your downhole operations with Kickover Tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry. View Details

Onshore Slickline Services

InWaTec Combined's Onshore Slickline Services: Ensuring Efficiency and Safety in Populated Areas In the bustling landscape of onshore oil and gas production, where operations often lie in close proximity to populated areas, the need for precision, safety, and minimal environmental impact is paramount. InWaTec Combined's Onshore Slickline Unit services are tailored to meet these critical requirements with unparalleled expertise. Precision Downhole Operations Our slickline operators are masters of their craft, adept at raising and lowering an array of downhole tools with the utmost precision. Using a robust single strand wire cable, they execute well testing and maintenance tasks with finesse. Tools such as bailers, pulling tools, stems, and running tools are maneuvered with exactitude to ensure the optimal performance of your wells. Innovative Tool Retrieval and Installation The versatility of our slickline services extends to the retrieval and installation of essential well components. Whether it's valves, plugs, or pressure regulators, our skilled operators can install or retrieve these with minimal intrusion. This is especially critical in onshore sites where operational efficiency and speed are key to minimizing the impact on nearby communities. The Slickline Advantage Slickline is not just a tool but a solution. It represents a niche within the industry that InWaTec Combined has perfected. The use of a slickline truck or undertaking a slickline job embodies our commitment to providing specialized services that cater to the unique demands of onshore well sites. Tailored for Onshore Challenges Recognizing the unique challenges presented by onshore well sites, especially in populated areas, our slickline units are designed for minimal footprint and rapid deployment. This ensures that our operations are not only effective but also considerate of the surrounding environment and community. A Partner in Responsible Well Servicing InWaTec Combined is more than a service provider; we are your partner in ensuring that onshore well operations are conducted responsibly, safely, and efficiently. Our Onshore Slickline Unit services are a testament to our dedication to operational excellence and environmental stewardship. In summary, as the oil and gas industry evolves, so do our services. InWaTec Combined is at the vanguard, driving onshore well servicing forward with our advanced slickline solutions, ensuring that your operations are sustainable, safe, and successful. View Details

Chemical Stimulation

Precision Chemical Stimulation with InWaTec Combined’s Mini-Coil Services In the realm of enhancing well productivity, chemical stimulation stands as a cornerstone technique, vital for improving hydrocarbon flow from reservoir to surface. InWaTec Combined proudly offers Mini-Coil Services, a highly specialized approach to chemical stimulation that addresses the need for precise fluid placement and robust performance under high pressures. Our Mini-Coil Tubing is the ideal conduit for delivering stimulation fluids in exact quantities directly to the target zones within the well. This precise delivery is critical for the effectiveness of chemical treatments, ensuring that every drop of stimulating fluid is utilized to its maximum potential. Advantages of Mini-Coil Tubing in Chemical Stimulation: High-Pressure Capability: The smaller diameter of our Mini-Coil Tubing allows for operations at significantly higher pumping pressures compared to traditional coiled tubing. This is particularly advantageous during chemical stimulation, where certain treatments require the application of fluids under substantial pressure to achieve optimal penetration and reaction within the reservoir. Precision in Fluid Placement: The precise placement of stimulation chemicals is crucial for the success of any treatment. Our Mini-Coil Tubing services ensure that the stimulation fluids are deposited exactly where needed, which is particularly beneficial in complex reservoirs or when targeting specific formation layers. Efficient Well Lifting: Post-stimulation, wells often require assistance to commence or resume production. The Mini-Coil Tubing is not only perfect for fluid delivery but also for well lifting operations, facilitating the transition from treatment to production smoothly and effectively. Tailored Operations: Understanding that flow rates and snubbing force are aspects where Mini-Coil Tubing has limitations, InWaTec Combined has optimized the design and operation of our Mini-Coil Services to maximize their strengths. Our team of experts can adjust operations to suit the specific conditions and requirements of each well, ensuring that the limitations are mitigated and the advantages are fully leveraged. InWaTec Combined’s Mini-Coil Services represent a fusion of innovation, precision, and efficiency. We bring this triad to every chemical stimulation project, ensuring that our clients' wells receive the most meticulous and effective treatment possible. By choosing InWaTec Combined for your chemical stimulation needs, you are opting for a partner dedicated to enhancing your well performance with cutting-edge solutions. Our Mini-Coil Services are a testament to our commitment to pushing the boundaries of what is possible in well intervention and stimulation. Experience the difference with InWaTec Combined’s Mini-Coil Services—where small-scale delivery meets large-scale impact, driving your wells towards maximum productivity. View Details

Servers Leasing

7" HP-6 Hydraulic Set High Angle Production Packer for 26-32 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Wire Brush for Slickline

Achieve Superior Wellbore Cleanliness with HOCA Oil Tools' Wire Brush In the demanding realm of oil and gas extraction, the cleanliness and integrity of wellbores are paramount for operational success. Recognizing this critical need, HOCA Oil Tools has developed a premier solution: the Wire Brush, an essential component of our comprehensive downhole slick line tools portfolio. Designed to tackle the toughest wellbore contaminants, our Wire Brush is engineered for excellence, ensuring your operations maintain peak efficiency and safety. HOCA's Wire Brush: Pioneering Downhole Cleanliness At HOCA Oil Tools, we understand that every downhole environment poses unique challenges. That's why our Wire Brush is meticulously crafted to remove deposits, scale, and other obstructions with unmatched efficiency. Constructed from durable materials capable of withstanding harsh downhole conditions, the HOCA Wire Brush is your ally in maintaining wellbore integrity and optimizing production flow. Elevating Downhole Maintenance with HOCA Oil Tools Innovation, quality, and customer satisfaction are at the core of HOCA Oil Tools' mission. Our Wire Brush exemplifies these values, providing a solution that not only meets but exceeds the demands of modern downhole operations. With the HOCA Wire Brush, operators can expect a level of cleanliness and efficiency that sets new industry standards. Adopting the HOCA Wire Brush into your downhole cleaning regimen is an investment in your operation's future. It signifies a commitment to operational excellence, safety, and cost-effectiveness. Our dedicated team at HOCA Oil Tools is committed to supporting your success by providing superior downhole solutions that address the specific challenges of the oil and gas industry. Embrace the future of downhole maintenance with HOCA Oil Tools’ Wire Brush – your solution for maintaining pristine wellbores and maximizing operational outcomes. Experience the difference that comes with using tools crafted for excellence and backed by an unwavering commitment to your operational success. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Wire Brush to keep their operations running smoothly, safely, and efficiently. View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

3 1/16" Coiled Tubing Hanger 10M Pressure Rated

Coiled tubing is a continuous, flexible steel pipe widely used in well intervention and maintenance operations, allowing operators to clean, stimulate, log, or deploy tools inside the wellbore without shutting down production. This capability makes coiled tubing an efficient and cost-effective solution to maintain well health and improve productivity.

The 3 1/16” 10M Coiled Tubing Hanger is designed to support larger diameter coiled tubing and heavier tool strings required for more demanding or deeper well operations. The size “3 1/16”” refers to the wellhead bore size that the hanger fits into, while the “10M” indicates its pressure rating of 10,000 psi, meaning it is built to withstand high-pressure environments typically found in advanced well interventions.

This hanger is rated to maintain pressure containment during interventions in high-pressure wells, ensuring safe operations and protecting well integrity. It accommodates coiled tubing sizes ranging from 1 inch up to 1¾ inches outer diameter, which allows the deployment of heavier and more complex downhole tools needed for challenging well conditions. Its rugged construction is engineered to withstand mechanical stresses from heavy tool strings and high pressures without compromising performance.

Designed with flanged connections compatible with API 6B and 6BX standards, the hanger integrates seamlessly with existing wellhead equipment, simplifying installation and maintenance. An important feature of this model is the wireline entry sub, which guides wireline tools into the tubing bore, facilitating additional intervention tasks. The wireline entry sub also provides a secondary annulus seal that prevents fluid or gas leaks and restricts any upward movement of the tubing, enhancing operational safety.

The hanger maintains a secure secondary annulus seal around the tubing, which is critical for isolating pressure zones and protecting against leaks during live well operations. This versatility makes the hanger suitable for various well intervention activities such as well cleanouts, acidizing, logging, and tool deployment, particularly in situations where larger tubing and higher pressures are involved.

The 3 1/16” size strikes a balance between tubing size and wellhead bore capacity. It is larger than smaller hanger sizes, allowing operators to use coiled tubing capable of handling more demanding operational requirements. Its high-pressure rating ensures safe operation in wells where pressures can reach or exceed 10,000 psi, common in deeper or complex reservoirs.

View Details

Project QA/QC Platform

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available. View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 40-47 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Electric Submersible Pump ESP Packer 7"

Electrical Submersible Pump Packer

1.Hydraulic-Set, Dual-Bore Design

The ESP packer is a single-mandrel, dual-bore, hydraulic-set production packer, meaning it is set in place using hydraulic pressure applied through the tubing. The dual-bore design allows for a pass-through section, enabling the electric cable to reach the ESP below the packer.

2.Bi-Directional Slip System for Secure Anchoring

The packer features bi-directional, case-carburized slips that securely anchor the packer in place against well pressures from both above and below. This prevents movement and ensures operational stability.

3.Versatile Release and Retrieval Mechanism

The ESP packer can be retrieved using a straight upward pull on the tubing string. It is also available in both straight pull and cut-to-release options, providing flexibility for different well conditions and operational preferences.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type