Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Surface Controlled Annular Vent and Sleeve Valve 2 inch

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue. View Details

Ambient Valve 3 1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

KWIK Control Line and Cable Protector

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

Double Roll-on Connector for Coiled Tubing

DRC Coiled Tubing Connector | Double Roll-On Link | Marlin Oil Tools Description: Introducing the DRC (Double Roll-on Connector) from Marlin Oil Tools, the essential connecting link between two ends of splicing Coil Tubing (CT) in the oil and gas industry. Engineered for seamless integration and reliable performance, the DRC Connector features three grooves on each end, facilitating secure fixing (rolling) of the CT and ensuring optimal stability during operations. Key Features: Double Roll-On Design: The DRC Connector boasts a double roll-on design, with three grooves on each end for enhanced stability and secure attachment of splicing Coil Tubing. This innovative design minimizes the risk of movement or displacement, ensuring uninterrupted operations in challenging wellbore environments. Robust Sealing: Equipped with O-rings positioned between the grooves, the DRC Connector provides a reliable barrier against in-line working pressures. These O-rings effectively seal the connection, preventing leaks and enhancing operational safety and efficiency during Coil Tubing applications. Streamlined Installation: With its roll-on design and precision engineering, the DRC Connector simplifies the installation process, minimizing downtime and optimizing operational efficiency. The grooves allow for easy and secure attachment of splicing Coil Tubing, facilitating swift deployment in well intervention projects. Versatile Compatibility: Designed to accommodate a wide range of splicing Coil Tubing applications, the DRC Connector offers versatile compatibility with various sizes and configurations. Its robust construction and reliable sealing capabilities make it suitable for diverse operational requirements in the oil and gas industry. Engineered Reliability: Built to withstand the rigors of oil and gas operations, the DRC Coiled Tubing Connector delivers unmatched reliability and performance. Its durable construction, combined with advanced sealing technology, ensures consistent and dependable operation, minimizing downtime and maximizing productivity. Experience enhanced efficiency and reliability in Coil Tubing applications with the DRC Connector from Marlin Oil Tools. Trust in our expertise and commitment to quality engineering for your well intervention needs. View Details

Packer Setting

Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time. View Details

Wind Turbine Charger

Rutland 1200 Turbine Features Unique Tri-Namic Aerofoil Blades The refined aerofoil blade profile is purpose designed for quietness, low windspeed start up and high wind peak aerodynamic performance. Each injection moulded blade is identical and perfectly balanced for smooth operation. Unrivalled power generation of 250W at 10m/s (23mph/37kmph) and peak power of 483W @ 15m/s. Our efficient, finely profiled Tri-namic blades ensure that the Rutland 1200 converts the maximum energy available in the wind to charge your batteries. Elegant and Aerodynamically Styled The sculpted nose and nacelle efficiently direct the flow of air leading to the built-in tail fin which directs the rotor to the prevailing wind. Our Build Quality The Rutland 1200 Turbine sets the standard for micro wind turbines in both performance and reliability. At our manufacturing facility in Corby, UK we use high grade materials to create a robust, high quality and long lasting turbine. Distinctive blue hard anodized marine grade aluminium, modern and lightweight UV stable injection mouldings and stainless steel components and fasteners perform in temperatures experienced from the Arctic to the equator. Available in 12V 24V & 48V versions. Generator The Rutland 1200T generator is based on Marlec’s pioneering disk type design. Its low resistance AC operation combines the latest powerful rare earth type magnets with a 3-phase winding and low friction bearings. This is housed in a protective aluminium casing and all manufactured by Marlec in the UK. *features from manufacturers literature View Details

Pipeline Pipe Inventory and Inspection Tracking

Streamlining Pipeline Pipe Inventory and Inspection Tracking with PipeDNA: Enhancing Efficiency in the Oil and Gas Industry Efficient management of pipeline pipe inventory and inspection tracking is crucial for the smooth operation of the oil and gas industry. Introducing PipeDNA, a state-of-the-art cloud-based platform designed to streamline the management of pipe and tube throughout the entire supply chain. With its powerful features and innovative technology, PipeDNA empowers stakeholders to proactively manage pipeline pipe inventory, increase visibility, and optimize inspection processes. Comprehensive Inventory and Tracking: PipeDNA provides a comprehensive inventory management and tracking system for pipelines, enabling stakeholders to have a real-time view of their pipeline assets. From monitoring utilization and activity to analyzing trends, the platform equips stakeholders with valuable insights to make informed decisions about their pipeline pipe inventory. With enhanced visibility, stakeholders can optimize inventory levels, minimize downtime, and maximize resource utilization. Efficient Logistics Management: Managing the logistics of pipelines can be complex, but PipeDNA simplifies the process by offering robust logistics management features. Stakeholders can efficiently handle shipments, track the status of pipeline pipe in transit, and streamline documentation processes. Additionally, the platform facilitates pipe bundling, ensuring efficient grouping and transportation of pipeline pipe, leading to cost savings and improved operational efficiency. Streamlined Inspection Management: PipeDNA's inspection management capabilities extend to pipelines, allowing stakeholders to effectively manage inspection jobs across multiple sites. The platform enables seamless coordination, tracking of job statuses, and management of inspection profiles. By centralizing inspection data and streamlining workflows, PipeDNA optimizes the inspection process, ensuring compliance with industry standards and mitigating risks associated with pipeline integrity. Enhanced Identification and Traceability: PipeDNA's identification and traceability features enable quick and reliable identification of pipeline pipe, providing comprehensive details, activity history, and traceability documentation. The platform integrates popular barcode standards such as UPC, EAN, and QR codes, facilitating easy tracking and identification of individual pipelines. By enhancing identification and traceability, PipeDNA strengthens quality control measures, streamlines recalls if necessary, and supports compliance with industry regulations. Seamless Integration of Manufacturing Data: PipeDNA seamlessly integrates manufacturing data into its platform, eliminating the need for manual data entry and reducing the risk of human errors. This integration ensures that pipeline-related data, including manufacturing details, is readily available within the system. By automating the transfer of manufacturing data, PipeDNA enables stakeholders to maintain accurate and reliable records, facilitating efficient pipeline pipe management and data-driven decision-making. Leveraging Emerging Technologies: At its core, PipeDNA leverages today's popular and emerging technologies to optimize pipeline pipe inventory and inspection tracking. The platform supports barcoding and labeling systems, integrating popular barcode standards such as UPC, EAN, and QR codes. Additionally, PipeDNA is RFID ready, enabling stakeholders to seamlessly integrate RFID technologies such as labels and asset tags for efficient tracking and management of pipelines. Furthermore, the platform supports IoT data integrations using the MQTT standard, facilitating fast and reliable sensor data integration for enhanced pipeline pipe management processes. PipeDNA revolutionizes pipeline pipe inventory and inspection tracking in the oil and gas industry, providing stakeholders with a powerful cloud-based solution. By offering comprehensive inventory and tracking capabilities, efficient logistics management, streamlined inspection processes, enhanced identification and traceability, and seamless integration of manufacturing data, PipeDNA empowers stakeholders to maximize efficiency and productivity. Embrace PipeDNA and experience the benefits of improved pipeline pipe management, increased visibility, and optimized operations in the oil and gas supply chain. View Details

3.25 inch WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

2.5″ Butterfly Bleed Air Valve

The 2.5″ Butterfly Bleed Air Valve is a critical component in the LM2500 gas turbine, responsible for regulating the flow of bleed air—compressed air extracted from the turbine’s compressor stage. This valve helps control internal pressures and temperatures, which is essential to maintain safe and efficient turbine operation.

The valve has an effective flow area of 2.5 square inches, allowing it to manage airflow precisely in smaller turbine setups or space-restricted environments. Its butterfly-shaped disc is permanently attached to the shaft, which ensures consistent movement and reliable control of air flow with minimal play or slippage.

One important feature is its fast response time—less than 320 milliseconds to complete a full open or close stroke. This quick action enables the turbine control system to rapidly adjust pressure levels, preventing overheating and reducing mechanical stress on turbine components.

The valve’s bearing shaft is robustly designed to handle frequent small movements, known as dither cycles, without premature wear. The bearings themselves are specifically engineered to support these high-cycle conditions, improving the valve’s durability and lifespan.

By efficiently managing bleed air, this valve helps protect the turbine from excessive pressure build-up and thermal stress, which can otherwise lead to damage or reduced efficiency. Its design also allows installation without requiring changes to the turbine’s hydraulic or electrical systems, making it suitable for retrofits or upgrades on existing LM2500 turbines.

In summary, the 2.5″ Butterfly Bleed Air Valve plays a vital role in controlling compressor bleed air in LM2500 turbines, balancing safety, performance, and durability within compact or smaller turbine applications.

View Details

Water Injection Safety Valve Type MC 5-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

IT Technical Support and Maintenance Services

ELEKS IT Technical Support and Maintenance Services: Your Steady IT Compass In today's dynamic business landscape, flawless IT operations are imperative. The ever-evolving tech ecosystem requires impeccable management of technical challenges and periods of transformation. Enter ELEKS' advanced IT support and maintenance services – your guiding light in the realm of IT stability. ELEKS IT Technical Support and Maintenance Services: Guiding Your Path Protect Your IT Solution: Identifying issues and potential risks with your IT solution is the first step towards ensuring uninterrupted operations. Our swift resolutions minimize revenue loss and enable you to adapt seamlessly to environmental, IT infrastructure, and integration changes. No matter the landscape shift, your systems remain operational. Reinforce Your Skills: Equipped with expertise across multiple technological domains, we stand ready to help you overcome technical challenges and navigate digital transformations. Our knowledge base sets the stage for faster incident resolution and empowers your end-users with self-service capabilities, ensuring readiness for future changes. Overcome Complex Issues: Our IT technical support and maintenance services offer two tiers – L2 and L3. L2 swiftly gets you back on track post-failure, while L3 dives deep into complex issues, improving software by altering program code for enhanced performance. Reduce TCO of IT Systems: Years of experience pave the way for a seamless setup and robust support framework. This not only slashes your Total Cost of Ownership (TCO) but also facilitates faster issue resolution, garners superior customer feedback, and curtails systems maintenance expenditure. Transfer and Manage Duties and Risks: Our services enable your in-house team to focus on your core business, while we manage your IT infrastructure. Moreover, we're poised to provide after-hours support, ensuring you're covered for unforeseen circumstances. ELEKS IT Technical Support and Maintenance Services: Navigating Reliability Problem Resolution: Once an issue is reported, our team swiftly isolates the root cause and resolves it. Our proactive approach involves setting up monitoring tools to preempt incidents and potential problems, ensuring seamless operations for your users. L2 Technical Support: Quick recovery following a systems failure is guaranteed with our L2 support, all without making any alterations to your software code. This comprehensive service covers applications, databases, integration points, related environment components, and virtual cloud infrastructure. L3 Technical Support: For advanced software issues and improvements, our L3 support is your go-to solution. Our team of experts adeptly modifies your program code, covering everything from bug fixes and security/performance issues to system compliance checks and updates to integration interfaces. ELEKS IT Technical Support and Maintenance Services: Your IT Rock In a world where IT stability is paramount, ELEKS emerges as your steadfast partner. With our advanced support and maintenance services, your IT ecosystem gains the strength to navigate challenges and seize opportunities. Trust ELEKS to be your IT compass, guiding you towards unwavering operations and unwrapping the full potential of your digital endeavors. View Details

Crew Transport using modern buses worldwide

Crew Transport buses for long term charter in locations around the world where reliable transportation is critical. Getting the crew to and from the job site in safety and comfort is key to a good start and end to the workday. Custom crew bus solutions available and every project is unique so please contact us to work together to find an optimum solution on crew transport. View Details

MS-201 Multistage Steam Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

3 1/16" Coiled Tubing Hanger 10M Pressure Rated

Coiled tubing is a continuous, flexible steel pipe widely used in well intervention and maintenance operations, allowing operators to clean, stimulate, log, or deploy tools inside the wellbore without shutting down production. This capability makes coiled tubing an efficient and cost-effective solution to maintain well health and improve productivity.

The 3 1/16” 10M Coiled Tubing Hanger is designed to support larger diameter coiled tubing and heavier tool strings required for more demanding or deeper well operations. The size “3 1/16”” refers to the wellhead bore size that the hanger fits into, while the “10M” indicates its pressure rating of 10,000 psi, meaning it is built to withstand high-pressure environments typically found in advanced well interventions.

This hanger is rated to maintain pressure containment during interventions in high-pressure wells, ensuring safe operations and protecting well integrity. It accommodates coiled tubing sizes ranging from 1 inch up to 1¾ inches outer diameter, which allows the deployment of heavier and more complex downhole tools needed for challenging well conditions. Its rugged construction is engineered to withstand mechanical stresses from heavy tool strings and high pressures without compromising performance.

Designed with flanged connections compatible with API 6B and 6BX standards, the hanger integrates seamlessly with existing wellhead equipment, simplifying installation and maintenance. An important feature of this model is the wireline entry sub, which guides wireline tools into the tubing bore, facilitating additional intervention tasks. The wireline entry sub also provides a secondary annulus seal that prevents fluid or gas leaks and restricts any upward movement of the tubing, enhancing operational safety.

The hanger maintains a secure secondary annulus seal around the tubing, which is critical for isolating pressure zones and protecting against leaks during live well operations. This versatility makes the hanger suitable for various well intervention activities such as well cleanouts, acidizing, logging, and tool deployment, particularly in situations where larger tubing and higher pressures are involved.

The 3 1/16” size strikes a balance between tubing size and wellhead bore capacity. It is larger than smaller hanger sizes, allowing operators to use coiled tubing capable of handling more demanding operational requirements. Its high-pressure rating ensures safe operation in wells where pressures can reach or exceed 10,000 psi, common in deeper or complex reservoirs.

View Details

Tubing Cutter / Drill Pipe Cutter

Introducing Tubing Cutter / Drill Pipe Cutters from ID Oiltools - the perfect solution to quickly and effectively sever tubing during the removal of stuck pipe. Our Tubing Cutters are designed to handle the toughest situations when tubing becomes stuck in the well. To achieve maximum performance, we recommend choosing the cutter with the largest possible diameter that can run in the well. Our Tubing Cutter / Drill Pipe Cutters are air shippable at Class 1.4D and conform to API RP-67, ensuring that you receive a reliable and safe product. To maximize the effectiveness of the tool, our cutters should be centralized and run in recommended applications. Don't let stuck tubing slow down your operations - trust ID Oiltools Tubing Cutter / Drill Pipe Cutters to provide a quick and efficient solution. Contact us today to learn more about how we can help you overcome the toughest challenges in your well operations. View Details

Shifting Tools for Downhole Tools

Streamline Your Downhole Operations with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the constantly evolving oil and gas industry, having the right tools for specific downhole tasks can significantly enhance operational efficiency and safety. HOCA Oil Tools specializes in providing such solutions, and our Internal Fishing Neck Pulling Tools are a prime example. These tools are meticulously engineered for the safe and efficient retrieval of downhole equipment, ensuring operations proceed smoothly without unnecessary downtime or risk. HOCA's Internal Fishing Neck Pulling Tools: Engineered for Precision and Reliability Designed to latch onto internal fishing necks of downhole tools and equipment, HOCA Oil Tools' Internal Fishing Neck Pulling Tools offer unmatched precision and reliability. These tools are integral for the retrieval process, providing a secure grip without damaging the wellbore or the equipment being retrieved. Constructed from high-quality materials and designed to meet rigorous industry standards, our pulling tools ensure successful operations under a variety of downhole conditions. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means opting for a blend of quality, innovation, and support designed to meet the specific needs of modern downhole operations. Our commitment to excellence ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your downhole operations translates into enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering cutting-edge solutions and unparalleled service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Internal Fishing Neck Pulling Tools for their critical operations. Elevate your downhole performance with HOCA Oil Tools – where technology, innovation, and reliability converge to drive success. View Details

4 1/16" Coiled Tubing Hanger for 10,000 PSI

The 4 1/16” 10M Coiled Tubing Hanger is engineered to provide reliable mechanical support and pressure containment for coiled tubing strings used in demanding oil and gas well intervention operations. Specifically designed to accommodate coiled tubing sizes up to 3 1/2” outer diameter, this hanger is rated for high-pressure applications up to 10,000 psi (10M), making it suitable for wells with challenging downhole conditions and high-pressure requirements.

Constructed with robust materials and precision-engineered to meet API 6B and 6BX standards, the hanger ensures secure connection to wellhead equipment through flanged interfaces, enabling seamless integration into existing well infrastructure. The design incorporates a wireline entry sub that guides wireline tools into the tubing bore and provides a secondary annulus seal. This feature not only facilitates the safe deployment of wireline tools but also restricts any upward movement of the coiled tubing, maintaining tubing position and well control during operations.

This coiled tubing hanger supports a range of intervention tasks, including well cleanouts, stimulations, logging, and workover activities, by securely suspending the tubing and maintaining pressure integrity at the wellhead. The ability to reliably seal the annulus while supporting heavy-duty tool strings helps reduce operational risks, prevents fluid leaks, and minimizes well downtime. Its capacity to handle larger tubing sizes and high pressures makes the 4 1/16” 10M hanger especially valuable in complex wells where robust mechanical support and dependable sealing are critical for safe and efficient well intervention.

View Details

Solar Charge Controller

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue View Details

DeltaV Backbone Infrastructure

5" HP-6 Hydraulic Set High Angle Production Packer for 15-18 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

LANAI Remote Operated Vehicle

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability At Poseidon Robotics, we understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed. View Details

HDI V9000 Choke Console System

7 5/8" HP-5 Hydraulic Set Production Packer

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

HP-3 Hydraulic Set High Angle 6 5/8" 20-24 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

6 5/8" Mech-2 Double Grip Mechanical Set Packer

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

10 3/4" Mech-2 Double Grip Mechanical Set Packer

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Halliburton SP 7 inch TR-SCSSSV

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

Coiled Tubing Crossover Tool

Introducing the XOV Crossover Tool from Marlin Oil Tools: Your Solution for Seamless Downhole Connections Marlin Oil Tools is proud to offer the XOV Crossover Tool, a versatile downhole tool designed to facilitate the connection of two tools or pipes with differing threads, ensuring seamless integration within your Bottom Hole Assembly (BHA) during oil and gas operations. Engineered for adaptability, the XOV Crossover Tool is available in a wide range of designs, types, and sizes of threads to meet the diverse needs of the industry. Key Features of the XOV Crossover Tool: Versatile Thread Compatibility: Designed to connect components with different thread patterns, enhancing operational flexibility and efficiency. Customizable Design Options: Available in various designs and specifications, including multiple outer diameters and inner bore sizes, to perfectly match your operational requirements. Precision Engineering: Features precise thread codes for both internal (Box) and external (Pin) threads, ensuring reliable and secure connections. Rapid Customization Capability: Offers quick turnaround on customized tool designs upon client request, minimizing downtime and accelerating project timelines. Durable Construction: Built to withstand the harsh conditions of downhole environments, ensuring reliability and longevity of your tool assembly. Easy Integration: Seamlessly integrates into existing BHA configurations, providing a straightforward solution to connectivity challenges in the field. Maximize your downhole operational efficiency with the XOV Crossover Tool from Marlin Oil Tools, a leading solution for connecting downhole tools and pipes with varying thread types in the oil and gas industry. This highly adaptable crossover tool is engineered to offer precision, durability, and versatility, featuring customizable options for thread sizes, diameters, and designs to meet the specific needs of your operations. With its capability for rapid customization and reliable performance, the XOV Crossover Tool is the ideal choice for ensuring seamless connections and enhancing the integrity of your downhole tool assemblies. Choose Marlin Oil Tools for your crossover needs and experience the difference in quality and service. Why Choose the XOV Crossover Tool from Marlin Oil Tools? Operational Versatility: Ensures compatibility across a broad spectrum of downhole tools and pipe threads. Customization to Fit: Tailors to your specific operational needs with customizable designs and precise threading. Quick Response Time: Provides fast turnaround on custom requests, keeping your projects on schedule. Enhanced Connectivity: Guarantees secure and reliable connections, reducing the risk of operational issues. The XOV Crossover Tool by Marlin Oil Tools represents the cutting edge in downhole connectivity solutions, offering unparalleled adaptability, precision, and reliability for your oil and gas operations. Incorporate the XOV Crossover Tool into your tool assembly to achieve optimal performance and operational success. View Details

LM2500 Exhaust

The LM2500 exhaust system is an essential part of the LM2500 gas turbine, designed to handle the hot gases produced during turbine operation. Made from high-quality stainless steel, it is built to withstand extreme temperatures and harsh conditions, ensuring long-lasting durability.

The main purpose of the exhaust system is to safely direct these hot gases away from the turbine while reducing back pressure. Back pressure is the resistance the turbine faces when pushing out exhaust gases—lower back pressure means the turbine can run more efficiently, producing more power with less stress on its components.

This exhaust system is carefully designed to match the specific needs of the LM2500 turbine, ensuring smooth and efficient gas flow. It often works together with silencers or emission controls to release gases safely into the atmosphere while meeting environmental standards.

You would look for a new or replacement LM2500 exhaust system when installing a new turbine, upgrading to improve performance, replacing worn or damaged parts, or meeting updated environmental regulations. Choosing the right exhaust system is crucial because it directly affects the turbine’s performance, reliability, and maintenance costs. A well-designed exhaust system helps keep the turbine running efficiently and reduces the chance of costly downtime—critical factors for operations in oil and gas industries where reliability and efficiency are vital.

View Details

Welder's Cart

Introducing the Canaweld Welder Cart for Single Phase Machines - Your Ultimate Welding Companion! When it comes to welding, having the right equipment at your fingertips is essential. That's why we've designed the Canaweld Welder Cart - a sturdy and reliable cart that will keep your single-phase machines organized and accessible at all times. With its thoughtful features and robust construction, this cart is the perfect addition to your welding setup. Built for Strength and Durability: The Canaweld Welder Cart is crafted with a strong steel construction that ensures it can handle the demands of the oil and gas industry. Its powder coat finish adds an extra layer of protection, making it resistant to wear and tear from daily use. Rest assured, this cart is built to last. Maximum Convenience, Minimum Effort: Moving your welding equipment has never been easier. The front caster wheels on our cart swivel a full 360 degrees, allowing for smooth and effortless turning. No more struggling to maneuver your machines - our cart does the work for you. Ample Storage Space: Organize your welding essentials with ease. The Canaweld Welder Cart features three-tier shelves thoughtfully designed to accommodate all your portable MIG welders, stick welders, plasma cutters, and necessary accessories. Plus, there's enough room for consumables and a gas cylinder, ensuring you have everything you need at your fingertips. Secure Your Equipment: Your safety is our priority. That's why we've equipped the cart with a chain to secure the gas tank firmly in place. Worried about keeping your cables and helmet tidy? The side hook provides a convenient storage solution for them, eliminating clutter and potential hazards. Unbeatable Dimensions: The Canaweld Welder Cart boasts spacious shelf dimensions that perfectly cater to your welding equipment: • Top Shelf: 18 X 11 X 1 inches • Middle Shelf: 15.5 X 11 X 1 inches • Lower Tray: 27.7 X 11.5 X 2 inches • Gas Bottle Space: 10.2 X 11.4 X 2 inches Ultimate Load Capacity: Our cart can handle the weight. With a load capacity of 110 lbs. (50 kg), you can trust that your valuable equipment is safe and secure while on the move. Efficiency Meets Style: The Canaweld Welder Cart is more than just a functional tool - it's a sleek and stylish addition to your welding setup. Its design not only optimizes your workflow but also adds a touch of professionalism to your workspace. Upgrade Your Welding Experience: Say goodbye to the hassle of transporting your welding equipment and embrace the convenience of the Canaweld Welder Cart. It's time to work smarter, not harder. Elevate your welding experience today with Canaweld - your trusted partner in welding solutions. View Details

Hydraulic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Engineering Project / Engineering Management Platform

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available. View Details

MC Injection Safety Valve 3-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Multiprocess 201 SLM

Lamp KL5MS 1.65

Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.65 meters (5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations. View Details

Slickline Jars

Maximizing Downhole Efficacy with HOCA Oil Tools B.V.'s Slickline Jars In the ever-evolving landscape of oil and gas exploration and production, the precision and reliability of downhole operations are paramount. At HOCA Oil Tools B.V., we pride ourselves on our extensive expertise and innovative solutions in the field of slickline technology, particularly our diverse array of slickline jars designed to address a wide range of downhole challenges. Unparalleled Benefits of HOCA's Slickline Jars: Enhanced Operational Efficiency: Our jars significantly reduce non-productive time by enabling more effective and quicker responses to downhole sticking issues. Improved Downhole Dynamics: With the capability to deliver upward and downward jarring forces, our slickline jars optimize the impact on the obstruction, ensuring successful resolution of downhole incidents. Versatility Across Conditions: Designed for a variety of wellbore environments, our jars ensure optimal performance regardless of the downhole conditions. Superior Material and Construction: Crafted from high-grade materials, our jars withstand the extreme pressures and temperatures encountered downhole, ensuring durability and longevity. Customization for Specific Needs: Our extensive range accommodates different sizes and operational requirements, ensuring that every operation has the precise tool needed for the job. Safety and Reliability: Engineered to meet rigorous industry standards, our slickline jars enhance the safety and reliability of wireline operations. Diverse Array of Slickline Jars: Hydraulic Jars: Ideal for controlled, consistent jarring actions in sticky situations, providing the necessary force while minimizing risk to the toolstring and wellbore. Mechanical Jars: Known for their robustness and reliability, suitable for a variety of downhole conditions, offering immediate response to obstructions. Spring-Loaded Jars: Designed for situations requiring fast, sharp impacts, these jars are perfect for dislodging stuck tools or debris. Intensifier Jars: Amplify the impact force, ideal for extreme conditions where additional power is needed for jarring actions. Bi-Directional Jars: Capable of delivering both upward and downward forces, providing versatility and efficiency in clearing obstructions. At HOCA Oil Tools B.V., our commitment to innovation, quality, and customer service is at the core of our business philosophy. Our slickline jars are testament to this commitment, designed not only to meet but exceed the operational demands and challenges faced by our clients in the oil and gas industry. With HOCA Oil Tools B.V., you are choosing a partner dedicated to providing you with the best in slickline technology solutions. Explore our range of slickline jars and discover how we can enhance the efficiency and safety of your downhole operations. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Service Rig for well servicing activities on onshore wells in any location

Service rig suitable for well interventions, workers, abandonments, and completion activities. Rigs can be sized for specific well campaign requirements with valid safety case for jurisdiction. Cost effective alternative to larger drilling rigs or hydraulic worker units for a wide range of activities. Well maintained rig fleet staffed by oil and gas industry professionals providing top notch service and flexibility in location and activities. Able to be deployed in any geographic area with a focus on project results. View Details

Marine Oil Only Absorbent Spill Kit 4.6-gallon Bag

The absorbent spill kit 4.6-gallon bag contains, 5 Pads 8’ x 11.5” 1 Sorbent Sock 3” x 4ft 1 Bilge 1 Pair Nitrile Gloves 1 Disposal Bag Part number: OH-OOS-BO Use for small spills inside boats and near boat launches. Using an Oil Only Absorbent Spill Kit in a 4.6-gallon bag highly recommended for marine environments. It ensures that you are equipped to address oil spills swiftly and effectively, protecting the marine environment and complying with regulations. 5 Pads 8’ x 11.5” This package includes five absorbent pads, each measuring 8 feet by 11.5 inches. These pads are made for effective liquid cleanup, offering versatility and practicality. These pads are suitable for quick and efficient absorption of liquids, including oils and hydrocarbons. Their compact size and absorbent properties make them an ideal solution for managing spills in diverse industrial, automotive, and emergency response scenarios. 1 Sorbent Sock 3” x 4ft This package comprises a single Sorbent Sock, measuring 3 inches in diameter and 4 feet in length. The sock is made for efficient containment and absorption of liquid spills, particularly oil-based substances. Its mouldable and adaptable nature allows it to conform to different surfaces, making it versatile for diverse spill response applications. Whether used as a standalone solution or as part of a spill kit, this Sorbent Sock provides a targeted and effective response to spills. 1 Bilge A specific component designed for managing bilge water in a marine setting. The bilge component includes absorbent materials tailored for addressing water contaminated with oil or other hydrocarbons in a boat's bilge. This ensures a comprehensive solution for various spill scenarios that might occur on a boat. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 1 Disposal Bag Includes 1 Disposal Bag, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bag is employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. The absorbent spill kit in a 4.6-gallon bag is a complete package for marine use as it incorporates a range of components designed to address spills effectively and safely, whether they involve oil, fuel, or bilge water, ensuring a comprehensive and responsible spill response on boats and ships. View Details

T5.4 Thermocouple for LM2500

The T5.4 thermocouple is a temperature-sensing probe used in LM2500 gas turbines to measure exhaust gas temperature (EGT). The label T5.4 refers to its specific position in the turbine\'s exhaust thermocouple array—zone T5 (turbine exhaust), sensor 4. These sensors are part of a system that monitors thermal conditions at multiple points in the exhaust stream.

This thermocouple operates in high-temperature environments, withstanding continuous exposure up to approximately 1100°C. It is built to maintain accuracy and reliability under the thermal stress and vibration typical in gas turbine applications.

T5.4 thermocouples are often used with flexible

harness systems. This allows operators to replace individual probes without removing the entire harness, improving maintenance efficiency and reducing downtime.

By providing real-time exhaust temperature data, the T5.4 thermocouple supports engine control, performance optimization, and safety monitoring in industrial gas turbine operations.

View Details

Solar Panel capable of providing power to typical industrial monitoring and control systems

A solar panel, or solar module, is one component of a photovoltaic system. They are constructed out of a series of photovoltaic cells arranged into a panel. They come in a variety of rectangular shapes and are installed in combination to generate electricity. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect. View Details

Coiled Tubing Hydraulic Vibration Tool

Introducing the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools: Revolutionizing Well Intervention and Completion Operations Marlin Oil Tools is proud to present the HVT (Hydraulic Vibration Tool), an advanced downhole tool designed to significantly enhance the efficiency and reach of well intervention and completion operations. The HVT stands out for its ability to create controlled vibrations when liquid is pumped through it, reducing the friction coefficient across the Bottom Hole Assembly (BHA) and ensuring extended reach in long horizontal wells. Here’s a closer look at the HVT’s features, benefits, and why it’s an essential tool for your oil and gas operations. Key Features of the HVT (Hydraulic Vibration Tool): Friction Reduction: The HVT generates vibrations that significantly reduce the friction coefficient, facilitating smoother and longer reach of the BHA in horizontal wells. Versatile Application: With options for larger diameters, the HVT can also be utilized as part of the casing shoe, ensuring that the casing reaches the planned depth during well completions. Exceptional Durability: Engineered to withstand harsh downhole conditions, the HVT is resistant to nitrogen, acid, and hydrogen sulfide, offering unlimited working time in challenging environments. Compact and Efficient: The tool’s short length makes it an ideal choice for operations requiring high maneuverability and efficiency. Elevate your well intervention and completion processes with the HVT (Hydraulic Vibration Tool) from Marlin Oil Tools, a cutting-edge solution designed to overcome the challenges of extended reach in horizontal wells. By creating controlled vibrations, the HVT reduces friction, enhancing BHA maneuverability and ensuring casing is accurately placed during well completions. Its resistance to nitrogen, acid, and hydrogen sulfide guarantees reliability in even the most demanding environments, while its compact design promotes operational efficiency. Choose the HVT for unparalleled performance and durability in your oil and gas operations. Why Choose the HVT from Marlin Oil Tools? Enhanced Operational Reach: Maximizes the effectiveness of well interventions in horizontal sections. Increased Completion Success: Assists in achieving accurate casing placement for optimal well completions. Reliable in Harsh Conditions: Offers unmatched durability against nitrogen, acid, and hydrogen sulfide. Streamlined Design: Facilitates ease of use and integration into existing operations without extensive modifications. The HVT (Hydraulic Vibration Tool) by Marlin Oil Tools represents the forefront of innovation in downhole tool technology, providing operators with a powerful solution to enhance the reach and success of well interventions and completions. Incorporate the HVT into your toolkit to achieve operational excellence and maximize the potential of your oil and gas wells. View Details

Step Mill

Introducing the STM Step Mill from Marlin Oil Tools: Your Go-To Solution for Advanced Well Intervention and Milling Operations Marlin Oil Tools is excited to offer the STM Step Mill, a cutting-edge downhole tool specifically designed to enhance the efficiency of well intervention jobs. Whether you're dealing with bridge plugs, emergency lost equipment, or any obstruction softer than the mill's cutter, the STM Step Mill is engineered to grind and wash out these objects with unmatched efficiency. Key Features of the STM Step Mill: Superior Milling Performance: Designed to navigate and mill through downhole obstructions effectively, ensuring a clear wellbore for optimal production. Reduced Friction Surface: The STM Step Mill features a unique design with less friction surface, enabling it to mill out harder materials more efficiently than traditional tapered mills. Enhanced Weight-on-Bit Application: Its innovative design allows for higher weight on bit without the risk of stalling the downhole motor, maximizing milling effectiveness. Optimal Debris Removal: Equipped with multiple flushing holes, the STM ensures the efficient circulation of drilling fluid to remove milled particles from the well and cool the cutting edge. Durable Carbide Construction: Built with carbide welded onto the body, including options for crushed carbide and various insert designs, the STM Step Mill is designed for longevity and performance in challenging milling conditions. Comprehensive Redress Services: Marlin Oil Tools offers redress services for worn carbide, ensuring your STM Step Mill maintains peak performance throughout its service life. Elevate your well intervention strategies with the STM Step Mill from Marlin Oil Tools, a premier downhole tool designed for the oil and gas industry. Tailored for efficient grinding and removal of downhole obstructions, the STM Step Mill stands out with its reduced friction surface and ability to tackle harder materials without stalling the downhole motor. With its advanced carbide construction, optimal debris removal capabilities, and customizable insert options, the STM Step Mill is the ideal choice for increasing the ID of well restrictions and ensuring smooth wellbore conditions. Opt for Marlin Oil Tools’ STM Step Mill for enhanced well intervention and milling operations, backed by comprehensive redress services to extend tool life and performance. Why Choose the STM Step Mill from Marlin Oil Tools? Advanced Milling Efficiency: Offers unmatched efficiency in grinding down wellbore obstructions. Capability to Mill Harder Materials: Designed to tackle harder materials with greater ease compared to conventional mills. Higher Weight-on-Bit Flexibility: Enhances milling operations by allowing higher weight on bit without compromising tool performance. Customization and Longevity: Provides various carbide insert designs and redress services, ensuring a long service life tailored to your specific operational needs. The STM Step Mill by Marlin Oil Tools represents the forefront of downhole milling technology, offering a powerful solution for oil and gas operators focused on optimizing well intervention outcomes. Incorporate the STM Step Mill into your operations for smoother, more efficient wellbore preparation and obstacle management. View Details

LM2500+G4 DLE U PT Gas Turbine

The LM2500+G4 DLE U PT is a versatile gas turbine designed for a wide range of applications, including onshore and offshore power generation, gas pipeline compression, and LNG compression. It features Dry Low Emissions (DLE) technology, which reduces nitrogen oxide (NOx) emissions to as low as 25 parts per million by volume (ppmv) at 15% oxygen, meeting stringent environmental standards.

In the oil and gas industry, production rates are closely linked to available horsepower. The LM2500+G4 DLE U PT offers higher power output, high reliability, and a lower initial cost per kilowatt, making it a cost-effective solution for energy-intensive operations.

This turbine has proven its capability to operate reliably in extreme ambient conditions, with running data demonstrating performance at temperatures as low as -50°F and start-up capability down to -40°F. This wide operational temperature range ensures dependable service in harsh environments.

Fuel flexibility is a key strength of the LM2500+G4 DLE U PT. It can seamlessly switch between various fuels—lean treated natural gas, rich offshore gas, propane, or diesel—without shutting down or losing efficiency. This flexibility supports energy security, allowing continuous operation even if the natural gas supply is interrupted. Additionally, the turbine can be adapted to burn alternative fuels like bioethanol and naphtha, further enhancing fuel options.

A notable advantage of aeroderivative gas turbines like the LM2500+G4 DLE U PT is their ability to operate on hydrogen blends, which produce no carbon emissions when combusted. Both new turbines and existing units can be converted for high hydrogen fuel use, supporting decarbonization goals.

Moreover, the LM2500+G4 DLE U PT is truly dual-fuel capable, able to switch from 100% natural gas to 100% propane without the need for pilot fuels. This contrasts with dual-fuel reciprocating engines, which typically require about 5% diesel during gas operation, increasing costs and emissions. The LM2500+G4 DLE U PT’s fuel flexibility, emission controls, and robust design make it a reliable and efficient choice for demanding mechanical drive and power generation needs in the oil and gas sector.

View Details

StimStixx MatrixStixx

Introducing the Revolutionary MatrixStixx by StimStixx Technologies - Unleash the Power of Pinpoint Accuracy! Are you ready for a groundbreaking advancement in well treatment technology? Look no further than the MatrixStixx by StimStixx Technologies. Our specially formulated product is designed to deliver heated acid vapor with unparalleled precision, revolutionizing the way you approach well stimulation. With an outer dimension of 3.625 inches, our MatrixStixx is compatible with various conveyance methods, including slickline, wireline, coil tubing, and tractor conveyance. This versatility ensures that you can seamlessly integrate our solution into your existing operations, maximizing efficiency and minimizing downtime. The true power of our product lies in the highly reactive nature of the heated acid vapor it delivers. As it interacts with contaminants and carbonate scale, it penetrates with increased effectiveness and establishes optimal contact with the formation. This enhanced penetration translates to superior results, allowing you to unlock the full potential of your wells. But the benefits don't end there. The heated acid vapor, thanks to its high reactivity and relatively low volume, quickly vaporizes and becomes fully spent down-hole. This eliminates the need for post-treatment clean-up or disposal, reducing the risk of spills at the surface and ensuring a hassle-free operation. Experience the confidence of knowing that no contaminated effluent remains, enabling you to focus on what matters most - the success of your well stimulation. With the MatrixStixx by StimStixx Technologies, you can wave goodbye to costly and time-consuming post-treatment procedures. Join the ranks of forward-thinking industry leaders who trust StimStixx Technologies to deliver unrivaled accuracy, efficiency, and environmental responsibility. Elevate your well treatment to new heights with the MatrixStixx - the future of precision well stimulation is here. View Details

3-1/2" WR-SCSSSV FXE

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”

The 3-1/2" WR-SCSSSV FXE is a Ballycatter model safety valve specifically designed for installation in the upper wellbore to provide an emergency shut-off of the production flow path. This valve plays a crucial role in well control by isolating the wellbore during emergency situations such as system failures or damage to surface production control facilities. Its fail-safe design ensures that the valve automatically closes to protect the wellbore and surface equipment whenever a fault occurs.

This safety valve is a flapper-type valve that is both surface controlled and wireline retrievable, allowing operators to easily deploy, operate, and retrieve the valve without extensive well intervention. The valve is installed within a corresponding model Landing Nipple, ensuring precise fit and reliable operation within the tubing string.

The design incorporates a self-equalizing mechanism that balances pressure differentials across the valve, which helps maintain consistent performance even under varying downhole pressures. This self-equalizing feature reduces the risk of valve malfunction due to unexpected pressure changes.

When the valve is in the open position, the sealing surfaces are positioned outside the flow path, ensuring that the fluid can pass freely without obstruction or erosion on the sealing components. This arrangement optimizes flow efficiency and helps extend the valve’s operational life. The flapper itself is made from solid bar stock, providing a strong and durable barrier that can withstand the harsh conditions found in high-pressure well environments.

The valve is rated for working pressures up to 10,000 psi, allowing it to operate reliably under high-pressure well conditions. The 3-1/2" WR-SCSSSV FXE is designed to ensure wellbore isolation in emergency situations, providing a critical safety function in the well control system.

View Details

Servers Leasing

Digital Twins

Empowering Energy Excellence: Harnessing Digital Twin Technology with ELEKS In the dynamic landscape of the energy sector, innovation is the catalyst for success. ELEKS stands at the forefront of this innovation wave, armed with the power of highly innovative digital twin technology. Imagine a world where you can not only visualize your assets but also simulate their behavior accurately across various scenarios, predicting and optimizing their performance. This is the realm where our engineering prowess shines, crafting software solutions that seamlessly integrate advanced digital twin technology with the prowess of IoT and machine learning. Welcome to a future where data becomes insight, insight becomes action, and your energy operations transcend the ordinary. The Power of Digital Twin Technology: Your Pathway to Excellence Asset Visualization and Simulation: ELEKS' digital twin technology allows you to visualize your assets in unprecedented detail and simulate their behavior across a spectrum of conditions. This empowers you to foresee potential challenges and optimize performance proactively. Data Integration: Our engineers craft software solutions that bring together advanced digital twin software, IoT, and machine learning capabilities. This combination enables you to capture data from various sources, creating a comprehensive and interconnected view of your energy landscape. Real-time Tracking: Track energy usage, operational conditions, and KPIs in real time. ELEKS' solutions ensure that you're not just collecting data – you're gaining actionable insights that drive informed decision-making. Predictive Analytics: Take your energy management to a new dimension by feeding your data to machine learning models. Predictive analytics become your tool for demand response (DR) management, energy optimization, and risk mitigation. Demand Response (DR) Management: With predictive insights at your fingertips, DR management becomes more efficient and targeted. Respond dynamically to fluctuations in energy demand, ensuring optimal resource allocation. Energy Management Reinvented: Leverage predictive analytics to optimize your energy management strategies. Allocate resources intelligently, reduce waste, and enhance your overall efficiency. Risk Management Made Smarter: Digital twin technology, IoT, and machine learning converge to provide you with comprehensive risk insights. Identify potential risks before they escalate, safeguarding your operations and minimizing disruptions. Elevate Your Energy Operations with ELEKS At ELEKS, we don't just create software – we empower transformation. Our energy sector technology expertise doesn't just offer solutions; it unlocks new horizons of efficiency, accuracy, and innovation. The convergence of digital twin technology, IoT, and machine learning elevates your energy landscape to a realm of unparalleled insight and foresight. Join us in shaping the future of energy, where data becomes the foundation of intelligent decisions, and innovation paves the way for success. With ELEKS, you're not just embracing technology – you're embracing transformation. Step into a world where digital twin technology becomes your compass, guiding you towards operational excellence and a sustainable energy future. View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type