The Gauge Root Valve Bleed Valve with Vent Screw is designed for oil and gas applications where controlled pressure release is critical. It is installed on pressure gauges and instrumentation lines to provide a safe and easy way to vent trapped pressure. The vent screw allows operators to gradually release pressure without removing the valve, reducing the risk of sudden pressure surges that could damage equipment or compromise safety.

This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request. It is built to ASME B16.34 standards and produced under ISO 9001, PED, and ATEX quality systems, ensuring reliability and compliance with industry requirements. The design includes a metal-to-metal seal for high-pressure and temperature applications, a durable vent screw that prevents leakage, and easy operation even in confined spaces. Its construction allows for long-term durability and minimal maintenance, providing safe and accurate operation for critical oil and gas instrumentation systems.

The Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain is a high-performance isolation and venting solution designed specifically for oil and gas applications. This valve combines two independent ball isolation valves and a centrally located needle drain valve within a single, compact body, ensuring reliable double isolation and safe pressure relief or venting.

Manufactured in compliance with ASME B16.34, API 6D, and ISO 17292 standards, it offers assurance of global quality and safety benchmarks. The design accommodates line sizes ranging from ½” to 2”, with pressure ratings from Class 150 up to Class 2500, making it suitable for both standard and high-pressure operations.

The flange x flange connections provide secure installation and easy integration into piping systems, while the ball x ball configuration guarantees tight shut-off. The needle drain allows for controlled venting, sampling, or pressure equalization, enhancing operational safety and efficiency.

The valve is well-suited for critical applications such as pipeline isolation, meter calibration, instrumentation, and maintenance operations in oil and gas facilities. Its compact, space-saving design reduces potential leak paths compared to conventional multi-valve assemblies, lowering installation costs and improving reliability.

The HDI 1000P Pressure Gauge System is a battery-powered, intrinsically safe electronic gauge used to monitor high-pressure systems in oil and gas operations. It measures pressure using a strain gauge sensor and provides real-time readings on a digital display with both numeric and bar graph formats. Common applications include choke manifolds, cementing units, coiled tubing, and high-pressure pumping systems.

With pressure ranges available from 5,000 psi up to 30,000 psi, the 1000P is suitable for demanding environments. It offers ±0.5% full-scale accuracy, and optional 4-20mA or 0–1 VDC outputs for integration with PLCs or remote monitoring systems. The unit is housed in a sealed stainless steel enclosure and built to perform reliably in harsh, high-vibration field conditions.

Designed for ease of use, the 1000P includes a field-replaceable battery pack and supports a range of connection types such as 2" 1502, 2002, 2202, or flanged. Its solid-state platform minimizes maintenance and ensures consistent performance over time, making it a dependable tool for critical pressure monitoring tasks.

The HDI V9000 Virtual Choke Console System is a PLC-based control and monitoring platform that provides a digital representation of the traditional hydraulic choke console used in oil and gas operations. It integrates Human-Machine Interface (HMI) technology with electronic joysticks, enabling operators to monitor and control choke valves both locally and remotely.

This system supports flexible configurations to meet client requirements, including various console layouts and customizable language options. It is designed to interface not only with standard choke control components but also with additional monitoring equipment such as gate valve position indicators, mud gas separator pressure monitors, and environmental sensors for riser and sub-sea temperatures.

By digitizing choke control, the V9000 enhances operational oversight, allowing for precise valve positioning and real-time status feedback. Its modular architecture permits scalability and adaptation to complex wellsite setups, supporting improved safety and efficiency. The system\'s data logging and reporting features facilitate compliance tracking and operational analysis, making it a comprehensive solution for modern well control management.

The Double Block & Bleed Valve Flange x Flange 3/4” (DN 20) with Ball isolation and Needle drain provides dual isolation in oil and gas piping systems. The first ball isolates upstream flow while the second ball isolates downstream flow. The needle drain vents trapped pressure between the two isolation points, making it suitable for instrument or gauge isolation, chemical injection, or sampling in operations where maintenance or measurement is required without interrupting the main process.

This specific 3/4” (DN 20) valve is rated for Class 150 service. It has a flange diameter of 100 mm, a bore of 69.9 mm, a flange thickness of 15.9 mm, and uses four bolts of 1/2” size. The face-to-face length is 203 mm. It is manufactured from materials compatible with oil and gas environments and meets ASME B16.34, API 6D, and ISO 17292 standards for pressure-temperature performance and reliability.

The L type 2 valve manifold is a compact and reliable solution designed for connecting impulse lines to pressure transmitters or gauges in industrial systems. Its primary purpose is to allow safe and efficient measurement of process pressures while providing the ability to isolate, vent, or calibrate instruments without disrupting the process.

The L type configuration refers to the layout of the two valves, arranged in an L shape, which allows for simple and intuitive operation. This design enables the user to block the process pressure, bleed off trapped pressure, and perform calibration on static pressure transmitters or gauges. The arrangement minimizes installation space while ensuring clear and accessible operation.

Pipe to pipe manifolds are designed to connect directly to process lines using standard piping connections. This allows for straightforward integration with impulse lines and reduces the need for additional fittings. The manifold provides a secure and leak-free connection while maintaining easy access for maintenance, calibration, and testing of instruments. Overall, the L type 2 valve manifold combines compact design, operational simplicity, and high reliability for critical measurement applications.

Tube Fittings Male Connector NPT are used to connect tubing directly to threaded pipe systems, ensuring a secure and leak-tight joint in fluid and gas applications. The male NPT threads allow compatibility with standard pipe threads.

These fittings are unique due to their twin ferrule design, which provides a strong mechanical grip on the tubing while creating a reliable seal without requiring welding or additional sealants. The precision-machined ferrules deform evenly to prevent leaks, even under vibration, impulse, or high-pressure conditions.

Straight fittings are manufactured from bar stock, and shaped fittings are made from forgings, offering high structural strength. The case-hardened back ferrules and silver-plated female threads reduce wear and prevent galling, while the radius junction in elbows maintains smooth flow.

Installation is simplified: the tubing is inserted fully to the shoulder of the fitting, and the nut is tightened to specific torque, producing a secure connection. Male Connector NPT fittings are ready for immediate use and can be disassembled and retightened if needed.

Their combination of threaded pipe compatibility, twin ferrule sealing, and ease of installation makes them reliable and widely used in demanding industrial applications.