Ballycatter.ca - Industrial Equipment

Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles. AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The selfdischarge doubles for every increase in temperature by 10°C. Low internal resistance Accepts very high charge and discharge rates. High cyclic life capability More than 500 cycles at 50% depth of discharge. *data sourced from manufacturer. View Details

2 1/16" Coiled Tubing Hanger 5M Pressure Rated

The 2 1/16” 5M Coiled Tubing Hanger is designed to support coiled tubing strings in well intervention and completion work. With a 5,000 psi pressure rating, it’s well-suited for moderate to high-pressure wells, and its compact 2 1/16” size makes it ideal for smaller wellheads or space-constrained setups.

It handles tubing sizes up to 3 1/2” O.D. and is commonly used for cleanouts, stimulation, logging, and other coiled tubing operations. A built-in wireline entry sub helps guide tools into the tubing while providing an extra seal and preventing tubing movement—improving well control and operational safety.

The hanger is available with API 6B or 6BX flange connections and can include a side outlet if needed. It’s a reliable, field-proven choice for operations requiring strong support and safe access to coiled tubing tools.

View Details

Hydraulic cylinder for various industrial applications

A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end). View Details

Plug Chokes for Tubing

Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry. View Details

Needle Valves Integral Bonnet Series – Tube OD – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Integral Bonnet Tube OD needle valves feature a one-piece construction where the bonnet is integrated with the valve body, eliminating welded joints and providing enhanced strength and safety. This design ensures durability and reliable performance in high-pressure applications, minimizing the risk of leaks or failures.

The Tube OD connections allow secure attachment to tubing while providing precise flow control, making these valves ideal for instrumentation lines, pressure measurement, and process control systems. The design supports consistent, repeatable shut-off and smooth operation, even under demanding conditions.

These valves are particularly suitable for oil and gas applications where high-pressure resistance, leak-free performance, and ease of maintenance are critical. Additional features such as rolled stem threads and mirror-finished stems reduce wear, lower operating torque, and extend service life, ensuring dependable operation in both standard and critical environments.

View Details

C-1 Single Grip Invertible Packer

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

5 1/2" HP-6 Hydraulic Set High Angle Production Packer for 13-15.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Pipe Fittings Hex Nipples Male NPT – 1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

The Hex Nipple Pipe Fitting with Male NPT threads is a precision component used to connect two female-threaded pipes or fittings in instrumentation and process control systems. The male tapered threads create a tight, leak-resistant seal when engaged with a corresponding female NPT connection, making it suitable for high-pressure and high-temperature applications commonly found in the oil and gas industry.

Manufactured from high-quality bar stock, the fitting provides strength and durability. Threads are capped and carefully packed to prevent damage during transport. The fitting is marked with the manufacturer’s name, size, material, and heat code for traceability. The design ensures proper thread engagement, reliable sealing, and smooth flow of fluids or gases.

These fittings meet or exceed ASME B1.20.1 standards for NPT threads and are rated according to ASME B31.3 for process piping, supporting safe and consistent operation in industrial environments. The male NPT design allows easy installation while maintaining a durable, leak-tight connection over the life of the system.

View Details

Slickline Accelerator

Maximizing Downhole Dynamics with HOCA Oil Tools B.V.'s Slickline Accelerators In the intricate and demanding world of oil and gas extraction, the precision and effectiveness of downhole operations are paramount. HOCA Oil Tools B.V. is at the forefront of this industry, offering a comprehensive range of slickline accelerators designed to enhance the performance of various jars. Our accelerators are specifically engineered to maintain a constant pull on the jars, ensuring an intensified impact upon release, which is crucial for overcoming downhole challenges. Key Benefits of HOCA’s Slickline Accelerators: Enhanced Jar Performance: Our accelerators ensure a consistent and intensified jarring action, making them essential for effectively addressing downhole obstructions and ensuring operational success. Versatile Application: Compatible with various jars, our accelerators are suitable for a wide range of downhole conditions and operational needs, from routine maintenance to complex interventions. Optimized Impact Delivery: By maintaining a constant pull, our accelerators facilitate the optimal deployment of jars, ensuring that the necessary impact is delivered precisely where it is needed. Increased Efficiency: The improved jarring action provided by our accelerators can significantly reduce the time and effort required to address downhole issues, leading to faster, more efficient operations. Durability and Reliability: Constructed with high-quality materials and engineered to the highest standards, our accelerators are built to withstand the harsh downhole environment, ensuring reliability and longevity. Customization and Compatibility: Available in various sizes and with different connection types, our accelerators can be easily integrated into existing tool strings, providing a tailored solution to meet specific operational requirements. Innovative Features of HOCA’s Slickline Accelerators: Type ‘EO’ and ‘ED’ Accelerators: These models are designed for a range of sizes from 1 1/2” to 2 1/2”, making them adaptable for different operational scales and requirements. Threaded and QLS Connections: Offering flexibility for integration with different tool strings, these connection types ensure that our accelerators can be deployed swiftly and securely in various downhole environments. Optimized Length and Weight: With lengths ranging from 22.66” to 27.95” and weights from 7.0 lbs (3.18 kg) to 24.8 lbs (11.25 kg), our accelerators are engineered for balance and effective force transmission. Robust Construction: Our accelerators are constructed to endure the rigors of downhole operations, ensuring consistent performance and durability over time. At HOCA Oil Tools B.V., we understand the complexities and challenges of downhole operations. Our slickline accelerators are a testament to our commitment to quality, innovation, and customer satisfaction. By incorporating our accelerators into your tool string, you can enhance the efficiency and effectiveness of your downhole operations, ensuring that every intervention is optimized for success. Choose HOCA Oil Tools B.V. for your downhole needs, and experience the difference that quality and innovation can make in your operations View Details

Service Rig for well servicing activities on onshore wells in any location

Service rig suitable for well interventions, workers, abandonments, and completion activities. Rigs can be sized for specific well campaign requirements with valid safety case for jurisdiction. Cost effective alternative to larger drilling rigs or hydraulic worker units for a wide range of activities. Well maintained rig fleet staffed by oil and gas industry professionals providing top notch service and flexibility in location and activities. Able to be deployed in any geographic area with a focus on project results. View Details

WI Subsurface Safety Valve 2.72 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

6 5/8" HP-5 Hydraulic Set Production Packer 20-24 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Silicone Protective Case

Maximize Protection for Your Lighting Equipment with the Wisdom Silicone Protective Case from Provix Provix is excited to introduce the Wisdom Multi-color Silicone Protective Case (model NWI-ZCZ159), a durable and stylish accessory designed for Wisdom Cordless Lights. Available in a vibrant yellow, as well as other colors including black, green, orange, red, and white, this protective case is a perfect blend of functionality and aesthetics. Durable Silicone for Ultimate Protection Crafted from high-quality silicone, the Wisdom Protective Case offers superior protection for your cordless lights. The silicone material is robust and resilient, safeguarding your equipment against impacts, scratches, and daily wear and tear. This ensures your lighting equipment remains in top condition, ready for the demanding environments of mining and construction work. Vibrant Color Selection for Personalization Choose from a variety of colors to personalize your mining equipment. Whether you prefer the visibility of the bright yellow case or a more subdued tone like black or white, there's a color to match your style and preference. The colorful options also make it easier to identify your equipment among others, adding a layer of convenience to your workday. Designed for Wisdom Cordless Lights The Silicone Protective Case is specifically designed to fit Wisdom Cordless Lights, ensuring a snug and secure fit. This compatibility guarantees that the case provides optimal protection while maintaining the functionality and accessibility of your lights. Lightweight and Easy to Use Despite its sturdy construction, the protective case is lightweight and easy to install. Simply slip your Wisdom Cordless Light into the case for instant protection. The silicone material is flexible, allowing for easy application and removal, and does not add bulk to your equipment. Ideal for Mining and Construction Professionals Whether you're a miner, construction worker, or anyone who relies on portable lighting, the Wisdom Silicone Protective Case is an essential accessory. It not only protects your equipment but also adds a personal touch to your professional gear. Get Your Wisdom Silicone Protective Case Today Elevate the durability and style of your lighting equipment with the Wisdom Silicone Protective Case, available now at Provix. Visit our website at www.provix.net to choose from the array of colors and learn more about our range of high-quality mining equipment and accessories. View Details

Stickwelder 162 D

Unleash the Power of Versatility with the Stickwelder 162 D! At Canaweld, we understand the diverse welding needs of the construction, oil & gas industries, and more. That's why we are thrilled to introduce the Stickwelder 162 D - a welding marvel that offers high-quality performance across a wide range of metals and thicknesses, ensuring impeccable results in every project. Portable Powerhouse The Stickwelder 162 D is designed to be your reliable companion, offering portability, power, and versatility in one compact unit. Whether you require Stick Welding or TIG welding with a lift start, this welding machine rises to the occasion, delivering consistent and exceptional welds. Safety and Efficiency Combined We understand the challenges of adverse conditions, which is why we've equipped the Stickwelder 162 D with an extra function that reduces power draw, ensuring safer and more efficient performance in challenging environments. When precision matters, trust the Stickwelder 162 D to get the job done. Ideal for Light to Medium Duty Projects From construction sites to oil & gas projects, the Stickwelder 162 D is the ideal choice for light to medium-duty projects, providing reliability and flexibility in all weather conditions. Its lightweight construction and convenient carrying belt make transportation a breeze, ensuring you can take this welding powerhouse wherever the job demands. Weld with Confidence Enjoy excellent arc characteristics with the most common rods up to 5/32 inches, providing you with the confidence to tackle a variety of welding tasks. Experience low power consumption, making it energy-efficient and eco-friendly. Ready for the Outdoors The Stickwelder 162 D is designed to work outdoors with the appropriate power generator, offering you the freedom to take on welding projects wherever they may be. It's fan-cooled and thermally protected, ensuring durability and performance even in demanding conditions. The Canaweld Promise With Canaweld's Stickwelder 162 D, you can rely on the Canaweld promise of excellence and durability. Our comprehensive 3-year warranty further solidifies our commitment to quality and customer satisfaction. Get the job done right with the Stickwelder 162 D. Embrace the power of versatility, portability, and efficiency, and elevate your welding experience with Canaweld. Whether you're on a construction site or in the oil & gas industry, trust the Stickwelder 162 D to deliver flawless welds. Choose the welding machine designed with your needs in mind - the Stickwelder 162 D. Welding Perfected! View Details

Hydraulic Control Line for SCSSSV

Control lines are assembled on reels filled with fluid and pressure tested. Reel spools are designed so pressure can be applied at any time during running to check control-line integrity. Hydraulic control lines are made from two different manufacturing processes that conform to ASTM specifications: (1) seamless and (2) welded and sunk. Seamless Tubing is fabricated from a solid rod. The process involves forcing a mandrel or punch through the solid rod to form a tube. The continuous lengths available from this process are limited. Welded and Sunk Tubing is fabricated from flat stock. The process involves rolling the stock into a cylinder and welding the seam. Once in tube form, it is drawn through a die to achieve the proper OD. This process is considerably less costly than the seamless method and yields lines available in continuous lengths with no butt-welded connections. Optional single and dual lines with protective encapsulation are available. The encapsulated material is suitable for use in most annular fluids. Encapsulation protects lines from damage during installation and simplifies the running process. The dual-encapsulated line can be used with “balanced” SCSSVs or injection wells where multiple lines are required. As an option, a protective cable between two control lines is available. Single-encapsulated lines have no cable; however, a protective cable on either side of the control line can be ordered. Installation Control lines are attached to subsurface controls with appropriate tube fitting and pressure tested before running into the wellbore. Line spools are hung in the derrick, and control line is paid out as tubing is run. Applications » For SCSSVs Features » Different lengths of control line in continuous coil » Stainless and alloy 825 materials offered » Control lines offered in various encapsulated options » All control lines conform to ASTM specifications » Lines available in other sizes on request *information sourced from manufacturer View Details

Offshore Platforms for re-use

Our client has a number of offshore facilities available for use. These structures are currently in use as oil and gas production facilities and have been maintained as per the company management system for their entire lifespan. Please contact us to discuss your needs and the re-use of an offshore platform can save substantial cost and get production on years ahead of schedule when compared with a new build alternative. View Details

Pipe Fittings Hex Reducing Nipples Male NPT – 1/8", 1/4", 3/8", 1/2" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Hex Reducing Nipples Male NPT are pipe fittings designed to connect two female-threaded pipes of different diameters while maintaining a secure and leak-resistant seal. The male tapered threads provide a tight connection that prevents fluid leakage, which is especially important in high-pressure systems.

These fittings are widely used in the oil and gas industry, chemical processing, and instrumentation applications where a reduction in pipe size is required without adding extra joints.

They are manufactured from high-quality materials such as stainless steel, brass, and other compatible alloys, ensuring durability and resistance to corrosion. The fittings are precision-machined from bar stock to provide burr-free internal surfaces for smooth flow and to reduce turbulence within the system. Threads are carefully capped and packed to prevent damage during transit.

Hex Reducing Nipples are rated for pressures up to 10,000 PSI and comply with ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228 standards. They are designed for reliable performance in ambient temperatures from -28 to 37°C (-20 to 100°F) and support efficient installation with standard wrenches thanks to the hex shape, which allows secure tightening. These features make them suitable for high-pressure and instrumentation piping systems where both reliability and traceability are required.

View Details

Mesh Network Design and Installation

Pioneering Mesh Network Solutions for the Oil and Gas Industry: Nulux Leads the Way The oil and gas industry, characterized by its vast operations, challenging terrains, and the imperative for seamless communication, is a sector where reliable connectivity can make a profound difference. In this intricate web of operations, Mesh Network Design and Installation by Nulux Network Solutions emerges as the paramount solution for engineering professionals in the industry. Understanding Mesh Networks Unlike traditional Point-to-Point (P2P) or Multipoint configurations, mesh networks form a web of interconnected devices. Each node or device in this network is connected to multiple others, creating a network where information can take several paths to its destination. This interconnectedness ensures that even if one node fails, the network remains intact by rerouting data through other nodes, offering unparalleled reliability. Why Mesh Networks are a Game Changer for Oil and Gas Operations Robust Connectivity: Given the sprawling nature of oil and gas facilities, with sites spread across large geographic areas and often in remote locations, a mesh network ensures that there's no single point of failure. This robustness is crucial for operations where downtime can result in significant financial and operational setbacks. Scalability: As operations expand or evolve, mesh networks can be effortlessly scaled. With every new device acting as a node, the network becomes more resilient and extensive. Efficient Data Flow: With the capability to choose the quickest route for data transmission, mesh networks optimize the flow of information, ensuring timely decision-making and operational efficiency. Nulux's Expertise: Meshing Excellence with Experience Having an extensive background in various wireless infrastructures, Nulux Network Solutions has channeled its expertise into creating mesh network solutions that cater specifically to the challenges faced by the oil and gas industry. Customized Solutions: Recognizing that each operation is unique, our team tailors mesh network designs to align with the specific needs and challenges of each facility. End-to-End Service: From the initial design phase to the final installation, Nulux ensures that every aspect of the mesh network is handled with precision, ensuring optimal performance. Future-Ready: In an industry that's rapidly embracing digitization and smart technologies, our mesh networks are designed to be future-ready, compatible with emerging tech and capable of integrating with IoT devices and sensors. Driving Operational Efficiency with Wireless Solutions Beyond mesh networks, Nulux is committed to offering a comprehensive suite of wireless solutions. From designing Wireless Access Points (WiFi) that cater to bustling work environments to implementing secure and cost-effective Point-to-Point (P2P) networks, Nulux remains at the forefront of wireless tech, ensuring that the oil and gas sector is always one step ahead in its communication game. Conclusion In a sector where operational efficiency, safety, and timely decision-making are paramount, having a reliable communication network is non-negotiable. Nulux Network Solutions, with its cutting-edge Mesh Network Design and Installation services, offers the oil and gas industry a chance to revolutionize its communication infrastructure. Connect with us and let's chart a path to seamless connectivity together. View Details

Packer AD-1 Tension Set

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer. View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 47-53.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Regulator for Argon / CO2

Introducing Canaweld's Argon/CO2 Regulators - Elevating Safety and Performance in Welding! When it comes to welding, safety, reliability, and precision are non-negotiable. That's why Canaweld is proud to present our Argon/CO2 Regulators, designed to deliver top-notch performance and ultimate peace of mind. Choose the Right Regulator for Your Welding Needs - 150 Series and 250 Series: 1. 150 Series Argon/CO2 Single Stage Light Duty Regulator: At Canaweld, we believe in providing you with the best, and our 150 Series Regulator is no exception. While most regulators on the market have UL safety approved gauges only, with Canaweld, the entire regulator is UL approved. Safety is our top priority, and we ensure that every component of our regulators meets the highest standards. Key Features of the 150 Series Regulator: • Built-in encapsulated HD valve seat: Experience optimal flow rate, reliability, and safety with our regulator's cutting-edge valve seat design. • Drop-forged fine brass body and bonnet: Crafted to withstand the toughest conditions, our regulator's durable construction guarantees exceptional performance. • 2" durable gauge: Achieve precise pressure monitoring with our easy-to-read gauge. • Ideal for light industry and commercial usage: Whether you're a professional welder or a commercial user, our 150 Series Regulator is designed to cater to your needs. • Flow (SCFH): 0-60 • Cylinder Pressure (PSI): 4000 2. 250 Series Argon/CO2 Single Stage Medium Duty Regulator: For welding projects that require more power and durability, our 250 Series Regulator is the perfect choice. Like all Canaweld products, this regulator is fully UL approved, ensuring that you can weld with confidence. Key Features of the 250 Series Regulator: • Built-in encapsulated HD valve seat: Experience unparalleled flow rate, reliability, and safety with our regulator's advanced valve seat technology. • Drop-forged fine brass body and bonnet: Our regulator's rugged construction guarantees lasting performance, even in demanding welding environments. • 2" durable gauge: Keep track of your pressure levels effortlessly with our robust and accurate gauge. • Ideal for medium industry and commercial usage: From industrial projects to commercial applications, our 250 Series Regulator is designed to meet your welding requirements. • Delivery pressure (PSI): 200 Canaweld - Where Safety Meets Performance: At Canaweld, we take pride in offering welding solutions that prioritize safety and performance. Our Argon/CO2 Regulators are no exception, ensuring reliable and precise pressure control for all your welding needs. Choose Canaweld for top-quality Argon/CO2 Regulators - Elevate your welding experience today! View Details

H2S rated wireline and tools

Enhancing Well Integrity in Hostile Environments: InWaTec Combined's Braided Line H2S Rated Wire and Tools Services In the challenging and often volatile conditions of oil and gas extraction, the durability and integrity of well intervention equipment are paramount. InWaTec Combined is at the forefront of providing robust solutions for environments where corrosive agents like CO2, H2S, and chlorides pose significant risks. Our Braided Line H2S Rated Wire and Tools Services are specifically engineered to withstand such harsh well conditions, ensuring safety, reliability, and performance. Our braided line services are not just a component of our offerings; they are a testament to our commitment to innovation and resilience. The braided wirelines we employ are fabricated with materials offering extraordinarily high stability against a spectrum of corrosive threats, including: Corrosion: Our lines are designed to resist the chemical attacks that are common in high CO2 environments, maintaining their integrity over time. Stress Corrosion: The high-stress conditions of downhole operations can lead to vulnerabilities in standard materials. Our H2S rated wires are built to endure these stresses without succumbing to corrosion. Intergranular Corrosion: This type of corrosion can compromise the grain boundaries of metals. Our wirelines are composed of alloys that maintain their structure even in the presence of corrosive elements. The presence of H2S, known for its corrosive nature and potential to create hazardous work conditions, demands a solution that not only withstands this environment but also ensures the safety of the operation. InWaTec Combined's H2S rated wires and tools are up to this task, providing a reliable means of well intervention and maintenance without the risk of degradation. Our services extend to a suite of tools compatible with these high-strength wirelines, ensuring that every aspect of the intervention process is optimized for H2S-rich environments. From logging to perforating, our tools are designed to perform flawlessly, providing accurate data and successful outcomes despite the presence of aggressive agents. Choosing InWaTec Combined's Braided Line H2S Rated Wire and Tools Services means opting for a partner with an uncompromising stance on safety and quality. We understand the challenges of operating in hostile well environments, and we are dedicated to providing solutions that meet these challenges head-on. With InWaTec Combined, operators can confidently address well intervention tasks in even the most demanding conditions, assured by our high-quality materials and cutting-edge technology. Our commitment to excellence is your pathway to maintaining well integrity and achieving uninterrupted production, even in the face of H2S and other corrosive agents. Trust InWaTec Combined to deliver resilience and reliability downhole, where it matters most. View Details

General Mechanical Slickline Service

InWaTec Combined: Precision at Depth with General Mechanical Slickline Services In the demanding arena of oil and gas well maintenance, precision is not just a virtue—it's a necessity. At InWaTec Combined, we provide General Mechanical Slickline services that bring precision to the heart of your well operations. Our slickline services deliver targeted maintenance solutions, assuring that performance, integrity, and productivity remain at the forefront of your downhole activities. The Role of Slickline in Downhole Maintenance Slickline is the unsung hero of well servicing, a slender thread of robustness, lowering essential tools into the depths of oil and gas wells to execute critical maintenance tasks. It is the conduit for precision, the means by which tools are delivered to the precise downhole location where they are needed. Why Choose InWaTec Combined's Slickline Services? Expertise at Every Turn: Our slickline operators are seasoned experts, with the skill to navigate complex downhole environments, ensuring that every tool is deployed with accuracy. Versatile Tool Deployment: From routine maintenance to emergency interventions, our slickline services cater to a diverse range of downhole needs, delivering the right tool to the right place at the right time. Streamlined Operations: Efficiency is key in downhole operations, and our slickline services are designed to minimize downtime, streamline processes, and maintain the peak performance of your wells. Safety and Precision Combined: At InWaTec Combined, we balance the need for operational precision with an uncompromising commitment to safety, ensuring that every slickline operation upholds the highest standards. Tailored Solutions for Downhole Challenges Every well presents its own set of challenges, and InWaTec Combined's General Mechanical Slickline services are crafted to meet them head-on. We provide tailored solutions, customizing our approach to fit the unique needs of your well, ensuring that maintenance tasks are carried out with precision and care. Advanced Technology for Optimal Results We leverage the latest in slickline technology, utilizing advanced materials and innovative techniques to enhance the reliability and effectiveness of our services. Our commitment to technological advancement means that we're always at the cutting edge, providing services that are not just current but future-ready. Your Partner in Well Maintenance Choosing InWaTec Combined for your slickline needs means selecting a partner dedicated to the success of your well operations. Our General Mechanical Slickline services are a reflection of our promise to deliver excellence in every aspect of our work, from the initial deployment of tools to the completion of maintenance tasks. Conclusion: Your Well's Performance, Our Commitment In conclusion, InWaTec Combined's General Mechanical Slickline services are essential for maintaining the high performance and integrity of your oil and gas wells. With our focus on precision, efficiency, and safety, we ensure that your maintenance operations are performed to the highest standards. Trust in the expertise and dedication of InWaTec Combined to keep your wells operating smoothly, safely, and efficiently. View Details

7" HP-6 Hydraulic Set High Angle Production Packer for 20-26 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Hydraulic hoses for industrial equipment applications

Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar. View Details

Storm Choke 1-1/2 inch K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

BMS Liquid Stopper

BMS Liquid Stopper: The Innovative Solution for Safe and Eco-Friendly Workover Activities If you're looking for a reliable and eco-friendly solution for your workover activities, look no further than Clearstream's BMS Liquid Stopper. Our innovative product acts as a semi-solid plug that allows workover activities without impairing the formation, all while being completely biodegradable. Traditionally, workover activities involve the use of cement or other materials to create a plug in the wellbore. However, these materials can be harmful to the formation. BMS Liquid Stopper solves this problem by providing a safe and eco-friendly alternative. Our product is specially designed to create a semi-solid plug that can be easily removed once the workover activities are complete. This allows for a more efficient and effective workover process, without harming the environment or impairing the formation. In addition to its effectiveness and eco-friendliness, BMS Liquid Stopper is also biodegradable. This means that it breaks down naturally over time, without leaving any harmful residue in the environment. This makes it the perfect solution for companies that are committed to environmental sustainability. At Cleanstream, we take great pride in our commitment to quality, safety, and environmental responsibility. Our liquid stopper is rigorously tested to ensure that it meets the highest standards of quality and effectiveness. And with its biodegradable properties, you can rest assured that you are using a product that is safe for both your business and the environment. Don't settle for traditional materials that can harm the environment and impair the formation. Choose BMS Liquid Stopper for safe, efficient, and eco-friendly workover activities. Contact us today to learn more about how our innovative product can benefit your business. View Details

Bailer Sampling

InWaTec Combined: Streamlining Wellbore Clarity with Premier Sample Bailer Services In the ever-evolving landscape of drilling and production, the importance of maintaining a clean wellbore is paramount. At InWaTec Combined, we understand that the efficiency of your operations hinges on the clarity of the wellbore. That's why we offer comprehensive Sample Bailer running services, designed to support operations on drilling rigs, during workover operations, and in production wells, whether onshore or offshore. Optimizing Wellbore Integrity with Bailing Operations Bailing operations are a critical component of wellbore maintenance, aimed at collecting solids and cleaning the wellbore to ensure uninterrupted operations. InWaTec Combined's Sample Bailer services are tailored to meet the needs of any operation, providing a thorough cleansing of the wellbore and collection of solids that could otherwise impede production or damage equipment. Adaptable Services for Diverse Environments Whether it's the dynamic environment of offshore rigs or the structured demands of onshore wells, InWaTec Combined's Sample Bailer services are adaptable to any setting. Our equipment and expertise are suited to the unique challenges presented by both drilling and production phases, ensuring that we provide optimal solutions regardless of the environment. Leveraging Technology for Efficient Operations At InWaTec Combined, we utilize the latest technology in our Sample Bailer running services. This approach allows us to efficiently collect wellbore debris and samples, minimizing downtime and maximizing the productivity of the well. Our commitment to technological advancement means that we continuously improve our services to stay at the forefront of the industry. Safety and Environmental Stewardship We prioritize safety and environmental stewardship in all our operations. Our Sample Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of eco-friendly operations, especially in sensitive onshore and offshore locations. InWaTec Combined’s Commitment to Excellence Choosing InWaTec Combined for your bailing needs means partnering with a company that is committed to excellence. Our Sample Bailer running services are designed to deliver results with precision, safety, and environmental responsibility at the forefront. We are dedicated to providing services that not only meet but exceed industry standards. Conclusion: Your Clear Choice for Clear Wells In summary, InWaTec Combined’s Sample Bailer running services represent the highest standard in wellbore cleaning and sample collection. With our advanced technology, adaptable services, and unwavering commitment to safety and the environment, we are your clear choice for ensuring the integrity and productivity of your wells. Trust InWaTec Combined to deliver clarity and quality to your wellbore operations. View Details

NWB-30 Charger

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30. View Details

2.62 inch Water Injection Valve WI

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

ImplosionStixx by StimStixx

Introducing the ImposionStixx by StimStixx Technologies - Redefining Wellbore Perforation Cleaning with Precision Implosion! Are you ready for a game-changing solution to enhance your wellbore perforation cleaning? Look no further than the ImposionStixx by StimStixx Technologies. Our revolutionary product utilizes a specially formulated solid acid stick, capable of delivering heated acid vapor with pinpoint accuracy at the zone of interest, while creating an extraordinary implosion downhole. Harnessing the power of highly reactive heated acid vapor, the ImposionStixx guarantees increased penetration and optimal contact with contaminants and carbonate scale, effectively cleaning wellbore perforation tunnels like never before. The implosion created downhole ensures a thorough and efficient cleaning process, leaving no room for compromise when it comes to well stimulation. The ImposionStixx offers unparalleled environmental benefits as well. As the heated acid vapor interacts with contaminants and carbonate scale, it vaporizes and becomes fully spent down-hole, leaving no contaminated effluent behind. This not only reduces the risk of spills at the surface but also eliminates the need for post-treatment clean-up or disposal. With StimStixx Technologies, you can rest assured that you are making a choice that prioritizes both operational excellence and environmental responsibility. Say goodbye to traditional methods that fall short in achieving the level of precision and effectiveness you deserve. The ImposionStixx is here to revolutionize wellbore perforation cleaning, providing you with exceptional results, increased operational efficiency, and peace of mind. Join the ranks of industry leaders who trust StimStixx Technologies to deliver cutting-edge solutions for well stimulation. Experience the power of precision implosion with the ImposionStixx and unlock the true potential of your wellbore perforation cleaning. The future of well stimulation starts here. View Details

Hornet Packer

The mechanically set HORNET™ packer offers ease of operation with quarter-turn right to set and release. Converting it for wireline-setting applications is simple and inexpensive. The HORNET packer provides for landing in compression, tension, or neutral positions. Every component from the jay track, to the internal bypass, to the packing-element system and the upper slip assembly has been developed to ensure the HORNET’s setting and releasing reliability. The HORNET EL packer is run and set on electric line using an E-4™ (Product Family No. H43702) with a slow-set power charge or a J™ setting tool (Product Family No. H41371) and a special wireline adapter kit. An L-10™ type on/off seal nipple is run on top of the packer to connect the tubing to the packer and to house a blanking plug when the packer is used as a temporary bridge plug. We can source from current stock or direct from the manufacturer. View Details

5.5 inch Depthstar Surface Controlled Subsurface Safety Valve

Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog. View Details

Bag Oil Spill Kit

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 20-23 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Hydrostatic Bailer

Maximize Efficiency in Wellbore Clean-up with HOCA Oil Tools' Hydrostatic Bailers In the demanding world of oil and gas extraction, every operation demands precision, efficiency, and reliability. HOCA Oil Tools stands at the forefront of downhole solutions, offering innovative tools that redefine downhole operations. Among our acclaimed products is the Hydrostatic Bailer – a vital tool designed for effective wellbore clean-up and debris removal, ensuring operational integrity and minimizing downtime. Understanding the Hydrostatic Bailer The Hydrostatic Bailer, an essential component of our slick line tools range, is engineered to facilitate seamless debris removal from wellbores. Crafted with precision and made from high-grade materials, this tool is instrumental in maintaining clear, unobstructed wellbores, which is crucial for optimal production and operational safety. Employing the principles of hydrostatic pressure, the HOCA Hydrostatic Bailer removes sand, silt, and other obstructions with ease. Designed for versatility, it can be adapted to various well conditions and debris types, making it an indispensable tool for well operators and service companies alike. Elevate Your Wellbore Clean-up with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities of downhole operations. Our commitment to innovation, quality, and customer satisfaction drives us to develop tools like the Hydrostatic Bailer, designed to address the real-world challenges faced by the oil and gas industry. Integrating HOCA’s Hydrostatic Bailers into your downhole operations not only optimizes well performance but also aligns with cost-effective and safe operational practices. As the industry evolves, rely on HOCA Oil Tools to provide the solutions that keep your operations running smoothly and efficiently. Experience the difference with HOCA’s Hydrostatic Bailers – your partner in achieving clear, productive, and safe wellbores. Trust HOCA Oil Tools for unparalleled downhole solutions that drive your operations forward. View Details

Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain is a high-performance isolation and venting solution designed specifically for oil and gas applications. This valve combines two independent ball isolation valves and a centrally located needle drain valve within a single, compact body, ensuring reliable double isolation and safe pressure relief or venting.

Manufactured in compliance with ASME B16.34, API 6D, and ISO 17292 standards, it offers assurance of global quality and safety benchmarks. The design accommodates line sizes ranging from ½” to 2”, with pressure ratings from Class 150 up to Class 2500, making it suitable for both standard and high-pressure operations.

The flange x flange connections provide secure installation and easy integration into piping systems, while the ball x ball configuration guarantees tight shut-off. The needle drain allows for controlled venting, sampling, or pressure equalization, enhancing operational safety and efficiency.

The valve is well-suited for critical applications such as pipeline isolation, meter calibration, instrumentation, and maintenance operations in oil and gas facilities. Its compact, space-saving design reduces potential leak paths compared to conventional multi-valve assemblies, lowering installation costs and improving reliability.

View Details

5 Valve Manifolds R Type – Pipe to Pipe 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 5 Valve Manifold R Type – Pipe to Pipe is designed for high-pressure oil and gas applications where differential pressure transmitters or gauges need to be connected, calibrated, and maintained safely. This manifold provides two block valves, two equalizer valves, and one bleed valve in a single assembly, allowing operators to isolate the transmitter, equalize pressure between impulse lines, and safely vent pressure when required.

The R Type configuration is particularly suitable when multiple valve functions are needed in a compact layout. By combining all five valves in one manifold, it reduces the number of separate components, minimizes potential leak points, and saves installation space compared to using individual valves.

This manifold is ideal for environments where reliability and safety are critical, offering 6000 PSI standard working pressure, metal-to-metal sealing for high-pressure and temperature performance, and compatibility with NACE MR 01 75 materials. Its design ensures smooth operation, low torque handling, and long-term durability, making it the preferred choice for complex measurement and control systems in oil and gas operations.

View Details

Oil Only Absorbent Pad

Quick Absorbent Pads stand as a reliable and efficient solution for liquid cleanup, offering a combination of rapid absorption, fine-fiber construction, oil-specific capabilities, durability, and enhanced visibility. Upgrade your cleanup processes with a product designed to keep surfaces dry and operations running. Choosing the right solution for your needs is crucial, and our Quick Absorbent Pads offer several advantages that set them apart from other options. Why should you use the absorbent pads? Absorbent pads are specifically designed for rapid absorption of leaks, spills, and overspray. The quick response time is crucial in preventing the spread of liquids and minimizing potential hazards. If time efficiency is a priority, our absorbent pads are a superior choice. Unlike some general-purpose absorbents, our pads are engineered for the selective absorption of oils and oil-based liquids. This targeted approach ensures maximum effectiveness in scenarios where oil contamination is a primary concern. If your application involves oil cleanup, our pads offer a specialized solution. The fine-fiber construction of our absorbent pads ensures a clean and residue-free surface after cleanup. This is a significant advantage over some absorbents that may leave behind liquid or fiber remnants. If you value a thorough and residue-free cleanup, our absorbent pads are the ideal choice. absorbent pads feature a durable multi-layer polypropylene fiber structure, making them tough and resistant to tearing. This robust construction ensures longevity and reliability, even in demanding industrial environments. If durability and tear resistance are priorities, our absorbent pads excel in these aspects. The oil-specific absorption feature of our pads means they do not absorb water. This specificity is crucial in scenarios where water contamination is not desired. If you require an absorbent that selectively targets oils without absorbing water, our pads provide a distinct advantage. The bright white color of our absorbent pads enhances visibility during cleanup operations. This makes it easier to monitor the saturation level and determine when replacement is needed. If visibility and ease of use are important considerations, our pads offer a practical solution. Quick Absorbent Pads are versatile and suitable for a wide range of industries and applications. Whether you're in manufacturing, automotive, or any other sector with liquid spill concerns, our pads offer a reliable and efficient solution. In short: Oil Only Absorbent Pad - Absorbs up to 0.3 L (0.07 gal), absorbs rapidly, selective absorption of oils and oil-based liquids with maximum effectiveness, No residue or fiber left behind, the absorbent pad has durable multi-layer construction, oil-selective without absorbing water, bright white color for visibility, versatility across industries. Technical Specs Part Number: OH-P811 Product Type: Absorbent Pad Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 17.5 oz Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 5.2 liter Floating: Yes UV Resistant: No Size: 8” x 11.5” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes View Details

TIG AC/DC 281 Pulse Welding Machine

Geothermal

Revolutionizing Geothermal Well Interventions: InWaTec Combined's Mini-Coil Services In the dynamic world of geothermal energy production, where the efficient management of well interventions is paramount, InWaTec Combined is pioneering with our Mini-Coil Services. Designed to navigate the unique challenges of geothermal wells, our Mini-Coil Tubing offers a versatile and high-pressure tolerant solution for fluid placements and well stimulation. Geothermal wells demand a delicate balance between precision and strength. Our Mini-Coiled Tubing services are tailored to meet these needs, providing an ideal solution for the small quantity placements of fluids that are often required in geothermal operations. Whether it's for precision acidizing, scale removal, or other chemical treatments, the Mini-Coil is an invaluable tool. Compact Power: Our Mini-Coiled Tubing is compact yet robust, designed to handle the high pumping pressures needed for effective interventions in geothermal wells. Its smaller diameter does not compromise its ability to withstand intense conditions underground. Efficiency in Production: Lifting wells into production efficiently is crucial for maintaining the economic viability of geothermal operations. The Mini-Coil facilitates this by enabling operators to deliver targeted treatments and interventions that can revitalize well performance. Tailored to Geothermal Needs: While traditional coiled tubing operations may be limited by flow and snubbing capabilities, our Mini-Coil Tubing is engineered to overcome these constraints, providing enhanced pressure handling that is especially beneficial in the high-temperature, high-pressure environments characteristic of geothermal wells. It's true that Mini-Coil Tubing has its limitations regarding flow and snub, but what it offers in return is the capacity to handle significantly higher pumping pressures. This attribute is particularly advantageous in geothermal applications where the subsurface conditions can be extreme. InWaTec Combined's commitment to innovation is further demonstrated by the integration of advanced monitoring technologies that accompany our Mini-Coil Services. Real-time data acquisition allows for precise control and assessment of the intervention process, ensuring that operations are not only successful but also conducted with an emphasis on safety and sustainability. In the realm of geothermal energy, where the right interventions can drastically enhance the output and longevity of wells, InWaTec Combined's Mini-Coil Services emerge as a clear choice for operators seeking to optimize their wells. Our services are a testament to our dedication to providing solutions that are both efficient and effective, reducing downtime and maximizing production. Partner with InWaTec Combined for your geothermal well needs and experience the next level of well intervention services. Let our Mini-Coil Tubing unlock the full potential of your geothermal operations, where precision meets power, and innovation drives production. View Details

9 5/8" Mech-2 Double Grip Mechanical Set Packer for 29.3-36 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

FRN 3-1/2 inch Subsurface Safety Valve WR

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Control Room Wireless Links

Amplifying Control Room Capabilities through Robust Wireless Links by Nulux Network Solutions In the thriving pulse of the oil and gas industry, where operational precision and data integrity are pivotal, control rooms emerge as the neural centers orchestrating myriad operations with absolute finesse. At Nulux Network Solutions, we understand the paramount importance of seamless, secure, and robust communication for control rooms, ensuring that your operational harmony remains undisturbed amidst the cacophony of challenges posed by distance, terrain, and environmental factors. Nulux’s Control Room Wireless Links – Ensuring Uninterrupted Operative Symphonies Navigating through the technological and operational challenges, Nulux’s Control Room Wireless Links ensure that your data – the critical nerve of decision-making processes – travels seamlessly across the challenging terrains and distances, bridging your control room with the various operational nodes dispersed across diverse geographic locales. Wireless Connectivity – The Nulux Difference Our wireless solutions are meticulously crafted, ensuring: Seamless Connectivity: Bridging the communication gaps through point-to-point and multipoint configurations, tailored to meet your unique operational dynamics and challenges. Enhanced Reliability: With proven expertise in implementing robust wireless systems, we ensure that your control room is always in sync with the on-field operations, mitigating downtimes and enhancing decision-making processes. Optimized Cost-Effectiveness: Deploying wireless links that negate the need for extensive hardwired infrastructures, thereby ensuring that your operational efficiencies are not burdened by exorbitant capital expenditures. Intricate Comprehension of Wireless Technologies At Nulux, we prioritize understanding the subtle nuances and stark distinctions in wireless technologies, ensuring that your control room wireless links are not just communicatively optimal but are also operationally coherent. Point-to-Point Networks: Ensuring a dedicated, secure, and high-capacity data transmission channel between your control room and a fixed operational point. Multipoint Configurations: Crafting a network where the control room can communicate with multiple operational points through a single, secure, and reliable wireless channel. Safeguarding Your Data with Nulux In a world where data integrity and security are not mere necessities but vital operational prerequisites, our Control Room Wireless Links are fortified with robust security protocols, ensuring that your operational data is shielded from potential cyber threats, thereby facilitating a secure, reliable, and efficient operative environment. Engage with Operational Excellence Embark on a journey towards enhanced operational efficiencies with Nulux, where your control room is not just a strategic point but is the dynamic conductor of an orchestrated operational symphony. Our wireless links ensure that every note, every data point, is communicated, analyzed, and acted upon with absolute precision, ensuring that your operations resonate with reliability, efficiency, and absolute excellence. Unleash the true potential of your control room, ensuring that every decision, every action is backed by real-time data, secured communication, and the robust reliability of Nulux’s Control Room Wireless Links. Let’s sculpt an operational future where your decisions echo across the vast expanses of your operations, where your actions are timely, and where your control room truly controls, manages, and orchestrates your operational symphony with unmatched precision and reliability. Navigate with Nulux, where your pathways are not just connected but are securely, reliably, and efficiently interlinked. View Details

MLE Clamp for ESP's

LM2500+G4 SAC 50Hz CC 2x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 2x1 is a high-performance gas turbine system designed for large-scale, high-efficiency power generation, particularly suited to the needs of oil and gas operations. This configuration links two LM2500+G4 gas turbines with a single steam turbine in a combined cycle layout—capturing waste heat from the gas turbines to produce steam and generate additional power. This approach significantly improves overall thermal efficiency while maintaining operational flexibility.

The Single Annular Combustor (SAC) with optional water injection helps the system meet emissions rules while keeping combustion stable and efficient. The LM2500+G4 improves on the previous +G4 model by increasing airflow, using better materials, and adding improved cooling. This allows it to produce about 10% more power without reducing the lifespan of critical hot parts. It can be equipped with either a two-stage or six-stage power turbine to fit different needs. Even with the higher power output, the +G4 keeps its modular, two-spool design, which makes maintenance easier and ensures reliable performance in many environments.

In the 2x1 configuration, the system delivers approximately 41% more power than a single gas turbine unit. The use of combined cycle technology ensures better fuel utilization, helping to reduce overall emissions and lower lifecycle operating costs.

The LM2500+G4 SAC 50Hz Combined Cycle 2x1 offers higher power, improved efficiency, and a flexible design, making it well-suited for large-scale oil and gas operations that demand reliable and efficient power generation. Its “50Hz” designation means the turbine is specifically optimized to supply electricity to grids operating at 50 cycles per second, ensuring seamless integration with regional power systems.

View Details

5 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Fuel Nozzle for LM2500 Gas Turbine

The 2-cup Fuel Nozzle is a precision-engineered component used in gas turbines, specifically in the oil and gas industry. Its primary function is to inject liquid fuel into the combustion chamber in a fine, atomized spray, allowing for optimal mixing with air and efficient ignition. This ensures stable combustion, better fuel efficiency, and reduced emissions—key performance factors in industrial turbine applications.

The “2-cup” design refers to the nozzle’s dual flow passages, which help balance fuel distribution across the combustion zone. This promotes more uniform flame stability and lowers the risk of hot spots that can cause thermal stress to the turbine hardware. The nozzle is typically used on “base” engines and is suited for continuous-duty operations.

The L47197P05 variant is known for its compatibility with LM2500 turbine configurations and is built to endure harsh operating environments. It features durable materials and a design that withstands high temperatures and pressures commonly found in oil and gas turbine systems.

View Details

Stud Welder CAD 81

Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence! View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type