Ballycatter - Moves Projects Forward ballycatter.ca
0
    ×
  • All Categories
  • Construction
  • Marine
  • Subsea
  • Process Equipment
  • Transport
  • Workover
  • Completions
  • Drilling

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Ball Valve Lever Operated – 2-Way Male x Female End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated – 2-Way (Male × Female) is an isolation valve used to start, stop, or regulate fluid flow in oil and gas piping systems. Its 2-way design provides simple, reliable flow control, making it ideal for applications where full shut-off or bi-directional flow is required, such as upstream production lines, downstream processing, pipeline distribution, and injection systems.

The valve features a floating ball design for seat wear compensation and leak-proof performance under high-pressure conditions. It is manufactured and tested to ASME B16.34, meets ASME B31.3 pressure-temperature ratings, and is type-tested to MSS-SP-99. It supports bi-directional flow with a standard working pressure of 6000 psi (maximum 10000 psi on request) and a temperature range of –40 °F to 450 °F (–40 °C to 232 °C).

It operates via a quarter-turn lever with low torque. The stem is internally loaded with a shoulder to prevent blowout. Replaceable seats and packings extend service life, and the maximum orifice minimizes pressure drop. The valve is factory tested with nitrogen gas at 1000 psig (maximum leak rate 0.1 sec/min). Optional tests include vibration, temperature, and helium. It can also meet NACE MR0175 standards and fire-safe requirements, with heat code traceability for all components.

In conclusion, this 2-way ball valve provides reliable, leak-proof isolation for critical oil and gas operations, combining robust construction, high-pressure capability, and ease of operation to ensure safe and efficient flow control across the system.

View Details

5 1/2” SCSSSVs for High-Pressure Well Control

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 5 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) serves a critical safety function by enabling rapid well shut-in if uncontrolled flow occurs due to equipment malfunction or damage. Positioned in the upper section of the wellbore, this valve acts as a barrier to isolate the production pathway, helping to prevent uncontrolled release of fluids and protect personnel, equipment, and the environment.

Its fail-safe design means that any loss of control pressure or system failure causes the valve to close automatically, ensuring well integrity even in emergency situations. The valve uses a wireline-retrievable flapper mechanism that is surface-controlled, allowing operators to maintain or replace key components without pulling the tubing string—significantly reducing downtime and operational costs.

Engineered for wells utilizing 5 1/2" (139.70 mm) tubing, this valve fits landing nipples with a 4.562” seal bore and supports working pressures up to 5,000 psi. The internal valve diameter of 2.38” is designed to balance flow efficiency and tool passage capability. Additionally, by positioning the sealing surfaces outside the flow path when open, the valve minimizes wear caused by erosive fluids, enhancing durability and service life.

This SCSSSV provides a reliable, maintainable solution for well control in demanding operational environments, combining robust construction with practical features to support continuous production and rapid emergency response.

View Details

Stickwelder 5001C Series

Introducing the Stickwelder 5000 Series: Unleash the Power of Heavy-Duty Welding! At Canaweld, we are committed to providing welders with top-of-the-line equipment that delivers exceptional performance across a broad range of metals and thicknesses. Designed with the construction and oil & gas industries in mind, we proudly present the Stickwelder 5000 Series - a heavy-duty unit that will revolutionize your welding experience. Unmatched Performance in Tough Conditions The Stickwelder 5000 Series is built to withstand the harshest conditions. Its heavy-duty power source ensures ruggedness, reliability, and ease of use, making it the ultimate workhorse for heavy-duty fabrication shops. No matter the task, this welding machine is up to the challenge. Versatility at its Best Experience excellent welding characteristics in Stick welding with any kind of rods, particularly cellulosic electrodes, and TIG welding with a lift start. The Stickwelder 5000 Series boasts dynamic characteristics that set it apart from the competition, providing unparalleled control and precision in every weld. Precision Arc Length Control Tack welding becomes a breeze with the Stickwelder 5000 Series. Its arc length control feature guarantees ease of use and ensures precise and efficient tack welding for flawless results. Powerful and Efficient With an impressive 400 Amps of power and a high-duty cycle, this welding machine is a force to be reckoned with. Tested in scorching temperatures of 140°F/60°C, it delivers optimum performance, ensuring your projects are completed with speed and efficiency. Extended Reach, Enhanced Convenience With a suitability to be used with main cable lengths up to 330 feet (100 meters), the Stickwelder 5000 Series gives you the freedom to work comfortably and conveniently, even in large-scale projects. Advanced Technology for Ease of Use Equipped with a digital display, digital Ammeter, and Voltmeter, setting and monitoring current levels have never been easier. Additionally, the Stickwelder 5000 Series offers the option to activate the VRD function, further enhancing user safety. Reliable on Any Job Site No power fluctuations can hinder your welding performance, thanks to the Stickwelder 5000 Series' automatic compensation feature, accommodating main voltage fluctuations within ± 20%. Built for Your Success Engineered to adapt to generator power, this welding machine ensures seamless operation in any work environment. Choose Excellence with Canaweld Experience welding perfection and peace of mind with Canaweld's comprehensive 3-year warranty. Invest in the Stickwelder 5000 Series and elevate your welding projects to new heights. Take charge of your welding journey with the Stickwelder 5000 Series. Unleash the power of heavy-duty welding, experience unmatched versatility, and conquer every welding challenge with ease. Canaweld - Your Partner in Welding Excellence! View Details

Well Flow Control Valve Direct Response 4.36 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

HS Hydraulic set Packer

The HS™ is setting the standard for high-performance, single-string retrievable, hydraulic-set shear-release packers. Its simple and reliable design provides maximum pre-set prevention while running and has improved sealing and retrieving reliability, metallurgy and elastomer selections it for the well environment. Other applications include: production, injection and zonal isolation; single-string selective completions or dual-string completions with multiple packers; completions that require pre-set prevention while running; deviated wells or other applications when rotation for installation or removal is not beneicial; when it is beneicial to displace and set packers after the well is langed up. The HS-S™ is beneicial when testing the tubing string before packer setting or to independently set and test individual packers in multiple-packer completions and stacked packer applications. The HS-S is the selective-set version of the HS hydraulic-set single-string packer. Setting and retrieval is the same as the HS with the exception of an inner sleeve that must be shifted mechanically before the packer will set. The selective-setting mechanism prevents the packer from premature setting when high tubing-to annulus pressure differences are encountered or when tubing- pressure tests are performed. Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

7" Mech-2 Double Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Safety Valve (Subsurface) 3.63 inch WI

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Cleanouts

Streamlining Well Maintenance: InWaTec Combined’s Mini-Coil Services for Well Cleanouts In the pursuit of operational excellence within the oil and gas industry, well maintenance stands as a critical routine to ensure continued productivity and longevity of wells. InWaTec Combined’s Mini-Coil Services are specifically tailored for well cleanouts, offering a highly effective solution for the removal of debris and buildup that can impact well performance. Optimized Fluid Delivery: Our Mini-Coil Tubing is expertly designed for the precise placement of cleanout fluids, delivering them directly to the areas of buildup. This targeted approach is key to dissolving or dislodging blockages and ensuring a thorough well cleanout process. High-Pressure Cleaning: One of the standout features of our Mini-Coil Tubing is its ability to operate under much higher pumping pressures compared to standard tubing. This is particularly advantageous during well cleanouts where higher pressures can be required to remove stubborn or compacted debris. Efficiency in Production Lifting: Post-cleanout, it's often necessary to facilitate the well's return to optimal production levels. The Mini-Coil Tubing not only excels in delivering cleanout fluids but also in lifting wells back into production, making the transition from maintenance to output both seamless and efficient. Navigating Limitations: While the Mini-Coil Tubing may have limitations in terms of flow rate and snubbing capabilities due to its smaller size, InWaTec Combined has honed the application of this technology to maximize its benefits. Our experts are adept at customizing operations to work within these parameters while still achieving exceptional results. At InWaTec Combined, we understand that time is a precious commodity in well operations. Our Mini-Coil Services for well cleanouts are designed to minimize downtime, ensuring that maintenance is carried out swiftly and effectively, reducing the impact on production schedules. Our commitment to delivering innovative solutions is reflected in our Mini-Coil Services. We not only provide the tools but also the strategic expertise to ensure that every cleanout operation is a success. With InWaTec Combined, operators can rest assured that their wells will be maintained with the highest level of precision and care. Choose InWaTec Combined for your well cleanout needs and benefit from our advanced Mini-Coil Services. We bring to your operations a blend of precision, power, and efficiency that ensures your wells remain clean, clear, and productive. Let us partner with you to maintain the heartbeat of your well operations, ensuring uninterrupted flow and optimal performance. View Details

Broaching Tool Runs

InWaTec Combined: Precision Perfected with Our Broaching Tool Running Services In the complex tapestry of well service operations, precision is not just a goal—it's a necessity. At InWaTec Combined, we infuse this precision into every aspect of our work, especially when it comes to preparing wellbore tubing for subsequent interventions. Our Broaching Tool Running services epitomize this commitment, ensuring that wellbore tubings are in optimal condition for running or pulling service tools. The Critical Role of Broaching The wellbore is the heart of any drilling operation, and like any heart, it must be free from obstructions to function correctly. Enter the broach—InWaTec Combined’s answer to the industry's need for flawless tubing surfaces. Our broaching tools are engineered to meticulously remove metal burrs and imperfections that could jeopardize the integrity of service operations. By ensuring a clean and smooth tubing wall, we set the stage for efficient and trouble-free servicing. Advanced Broaching Technology Our broaching tools are not just tools; they are precision instruments. Equipped with graduated rings, diamonds, or segments, our broaches are case-hardened to withstand the rigors of the well environment. Their highly sharpened edges are designed to cut through imperfections with surgical precision, leaving behind a surface that meets the industry's highest standards. The InWaTec Combined Edge When you choose InWaTec Combined for broaching tool running services, you're not just getting a service; you're acquiring a partnership that values excellence. We understand that the quality of broaching directly impacts the success of your subsequent operations. That's why we've invested in developing a team of experts and a fleet of tools that stand unrivaled in quality and performance. Ensuring Success Down the Line Our broaching service is a critical precursor to a variety of downhole operations. By preparing your tubing with our broaching tools, you are ensuring that subsequent tools can be run or pulled with minimal risk of snagging or damage, thus preserving the integrity of your operations. This not only saves time but also reduces the likelihood of costly interruptions. Your Assurance of Quality At InWaTec Combined, our reputation is built on the back of our commitment to quality and precision. Our broaching tool running services are a testament to this promise. We don’t just deliver a service—we ensure that your wellbore is in the best possible condition for whatever comes next. In conclusion, with InWaTec Combined's Broaching Tool Running services, you can rest assured that the critical first step in your well servicing operations is in the most capable hands. Our precision tools and expert operators stand ready to deliver a seamless service experience that sets a solid foundation for your well's longevity and productivity. View Details

Water Injection Well Flow Control Valve 4.31 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

PRV repalcement Turbine

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success. View Details

Injection Valve Subsurface Safety 4.48 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Ambient Pressure SSSV 5-1/2

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Capillary Deliquification Safety System

In mature fields, liquid loading of gas wells is a common problem. In the short term, this can lead to decreased production, and if not managed correctly, can ultimately reduce overall reservoir recovery. One option for managing the problem is the use of surfactants as foaming agents to artificially unload the well. The preferred method would allow automatic and continuous delivery of these surfactants. The capillary deliquification safety system facilitates delivery of surfactants or other chemicals and liquids to a specified point within the completion, while maintaining the purpose and functionality of a downhole safety device. The deliquification safety system can be installed in an existing completion with the appropriate safety valve landing nipple (SVLN) profile — either a dedicated SVLN or within a tubing-retrievable safety valve (TRSV) in which the control system communication is activated to operate an installed wireline-retrievable safety valve (WLRSV). The system’s injection feature operates via the WLRSV control system. When control-line pressure reaches a predetermined pressure, a regulator installed below the WLRSV opens, allowing chemical injection to occur. Use of the existing control line provides a cost-effective method of installing a semi-permanent injection system without the need to modify the wellhead. The WLRSV is designed to shut in the well at a point below the surface and is opened with hydraulic control pressure. In this application, the applied chemical injection pressure maintains the safety valve in the open position during injection, and the valve closes when injection is stopped. Applications » Chemical injection for gas well deliquification or scale treatment purposes » Available for landing nipples/TRSVs with 2.75-in. and larger sealbores Features » Field-proven WLRSV » Equalizing or non-equalizing-type flapper closure *information referenced from supplier catalog. View Details

Braided Line 7/32 inch Sour Service

Superior Strength and Durability: InWaTec Combined’s 7/32" Braided Line for Sour Service Operations In the demanding and intricate world of well interventions, particularly in sour service conditions, the need for equipment that can withstand the rigors of a corrosive environment is paramount. InWaTec Combined is proud to introduce our 7/32" Supa 75 braided line, a specialized solution crafted for the harsh realities of fishing operations in sour service conditions where hydrogen sulfide (H2S) and other corrosive agents are present. Our 7/32" Supa 75 braided line is at the heart of InWaTec Combined's sour service offerings. Designed with high tensile strength and resistance to corrosive elements, this braided line ensures that fishing operations can be carried out with confidence and security, even in environments where H2S poses a significant risk to standard equipment. Resilience Under Pressure: The Supa 75 braided line is not just another cable; it's a product of rigorous engineering and quality materials, able to endure the stressors of sour well conditions without compromising performance. Corrosion Resistance: Our braided line is treated and constructed to resist the corrosive action of sour gas, ensuring longevity and reliability. This means uninterrupted operations and fewer replacements, saving time and resources. High-Performance Operations: With the Supa 75 line, fishing operations are conducted more efficiently and safely. Its robust build allows for the extraction of stuck equipment from the wellbore without the fear of line failure. Safety as a Priority: The safety of well operations is a non-negotiable aspect of InWaTec Combined’s services. The Supa 75 line's integrity in sour environments means enhanced safety for personnel and the well itself. Our commitment to innovation and customer service means that alongside the provision of the 7/32" Supa 75 braided line, InWaTec Combined offers comprehensive support and expertise. We provide tailored solutions that meet the unique challenges of each operation, ensuring that our clients have the best tools and knowledge at their disposal. Choose InWaTec Combined for your sour service operations and benefit from the advanced performance of our 7/32" Supa 75 braided line. With our technology and support, you can expect to extend the life of your well, maintain production efficiency, and uphold the highest safety standards. Trust in our braided line to deliver when it matters most, ensuring that your operations continue to flow smoothly, even in the face of adversity. View Details

HDI 2000P Pressure Gauge System

The HDI 2000P Pressure Gauge System is a solid-state electronic gauge designed to provide accurate and reliable pressure measurement in demanding industrial and oilfield environments. It is suitable for monitoring pressures up to 20,000 psi and is built to operate safely in hazardous locations.

The system includes a gauge display, inline cable, and a matched pressure sensor. The gauge features a 6-inch diameter LCD with a numeric display and a 101-segment analog bar graph for trend indication. The display is visible from up to 35 feet and is designed for use in varying lighting conditions.

Powered by a field-replaceable 3.6 V battery pack, the system supports continuous operation with minimal power consumption. Battery life is typically around 18 months, with a one-year guarantee. Calibration data is retained when powered off.

The pressure sensor uses a 3.5K strain gauge and is available in multiple pressure ranges. Sensors can be interchanged within specified ranges to reduce spare parts inventory. Connection types include 1” NPT, 2” line thread, ANSI or API flanges, 9/16” Autoclave, and 2” WECO.

Optional outputs include 4-20 mA and 0-1 Vdc signals for integration with chart recorders, PLCs, and remote displays. A remote display (slave gauge) option allows duplication of the pressure reading at another location.

The gauge and sensor are factory calibrated as a matched pair to ±0.50% full-scale accuracy. Calibration and configuration settings are stored in non-volatile memory and can be updated or reset by the user.

The 2000P Pressure Gauge System provides reliable pressure measurement with low maintenance requirements for industrial and oilfield applications.

View Details

3-1/2 inch injection valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Stand off Protector

Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line. View Details

Subsea Transformer for ROV

Introducing the Subsea Transformer: Taking Telemetry to New Depths In our unwavering commitment to advancing subsea robotics and ROV technology, we are thrilled to introduce our latest breakthrough: the Subsea Transformer. As part of our renowned Modular Telemetry System, this innovative subsea transformer assembly is set to redefine the capabilities of telemetry in deep-water operations. Unlocking New Possibilities We understand the unique challenges faced by subsea professionals, and we continuously strive to provide solutions that exceed expectations. The Subsea Transformer is a testament to this dedication, offering a seamless integration of state-of-the-art components to empower your subsea missions. High Voltage Meets High Performance Designed with precision engineering and utilizing cutting-edge technology, our Subsea Transformer boasts a 3kV input and delivers an impressive 240VAC + HV motor output. This combination of high voltage and performance ensures efficient and reliable power distribution for your critical subsea operations. MacArtney Opto-Link Connectors The Subsea Transformer is equipped with MacArtney Opto-Link connectors, renowned for their robustness and reliability. These connectors ensure secure data transmission, minimizing the risk of signal loss and maintaining a seamless flow of information between your subsea equipment and surface systems. CWDM Technology To further optimize data transmission and maximize the potential of your subsea operations, our Subsea Transformer incorporates Coarse Wavelength Division Multiplexing (CWDM) technology. By enabling multiple signals to be transmitted over a single fiber optic cable, CWDM enhances the efficiency of your telemetry system, reducing cable requirements and streamlining your subsea setup. Unparalleled Integration The Subsea Transformer assembly is engineered to seamlessly integrate with our Modular Telemetry System, forming a powerful combination that is greater than the sum of its parts. This integration empowers you with a comprehensive telemetry solution, allowing you to focus on your subsea objectives without the distractions of technical complexities. Reliability and Performance You Can Trust When it comes to subsea operations, reliability is paramount. It has been meticulously tested and validated the Subsea Transformer to ensure it performs flawlessly even in the harshest subsea environments. With our product, you can trust that your telemetry system will operate at peak performance, unleashing new possibilities for your subsea endeavors. Elevate Your Subsea Missions Discover a new era of subsea telemetry capabilities. Whether you are exploring the depths of the ocean or conducting critical subsea inspections, our solution is here to support and enhance your operations. Contact Us Today To learn more about the Subsea Transformer and how it can elevate your subsea missions, contact Ballycatter. Our team of experts is eager to collaborate with you in shaping the future of subsea robotics and ROV technology. Embrace the power of innovation. View Details

MS-32 Multistage Steam Turbine

Introducing the Kessels MS-32 Multistage Steam Turbine: Your Ultimate Back-Pressure Solution In the dynamic world of industrial steam turbines, efficiency, reliability, and flexibility are paramount. At Kessels Steam Turbines, we understand the unique needs of the oil and gas industry, where the demand for steam is relentless. That's why we are proud to introduce our MS-32 Multistage Steam Turbine – the pinnacle of back-pressure turbine technology. The Power of Back Pressure Turbines Back pressure turbines have long been a cornerstone of industrial steam applications, and they come in both single-stage and multi-stage options. These turbines serve as the vital link between the boiler unit and the process steam header. In environments where a copious amount of steam is required, back pressure turbines shine. Straight-Back Pressure for Maximum Efficiency What sets back pressure turbines apart is their straight-back pressure nature. This design allows for the efficient utilization of exhaust steam to meet process demands. The electrical power generated during the process is consumed precisely as needed, making it an energy-efficient choice. Applications Galore Our MS-32 Multistage Steam Turbine is a versatile powerhouse, ideally suited for a wide range of applications: Drive Applications: Commonly employed in the oil and gas industry, sugar mills, sugar fibrizor systems, shredder drives, pump drives, and many more. Power Generation Applications: Utilized to generate electricity by powering generators, offering a clean and sustainable energy solution. Bleed Back-Pressure Steam Turbines For scenarios where controlled extraction of steam within a medium pressure range is necessary, our turbines come equipped with bleed points. This feature allows for steam extraction at low volume steam demands, making it perfect for applications with high tolerance for pressure variations. Extraction Back-Pressure Steam Turbines When the process steam demand volume is substantial, and tolerance for pressure variations is minimal, our steam turbines with controlled extraction vents step up to the plate. Operating under intermediate pressure levels, they ensure a consistent and reliable steam supply. Why Choose Kessels? When you choose Kessels Steam Turbines, you're choosing more than just a product – you're choosing a legacy of excellence. With a history spanning decades, we have continuously pushed the boundaries of steam turbine technology. Our MS-32 Multistage Steam Turbine is a testament to our unwavering commitment to innovation, performance, and customer satisfaction. Unmatched Benefits of the MS-32 Multistage Steam Turbine: Energy Efficiency: Our turbines maximize the use of exhaust steam, minimizing wastage and lowering energy costs. Reliability: Built with precision and rigorously tested, the MS-32 ensures uninterrupted operations, even in demanding environments. Versatility: From drive applications to power generation, this turbine adapts to your needs with ease. Eco-Friendly: Harnessing the power of steam for electricity generation reduces carbon emissions, contributing to a greener future. Responsive Support: Our team of experts is always at your service, ready to assist with installation, maintenance, and troubleshooting. Upgrade to Excellence Today In the competitive world of the oil and gas industry, every advantage counts. Make the smart choice by upgrading to the Kessels MS-32 Multistage Steam Turbine – the epitome of efficiency, reliability, and sustainability. Contact us today to learn more about how our turbine can revolutionize your operations and propel your success into the future. Your journey to unparalleled performance starts here, with Kessels Steam Turbines. View Details

NWB-30 Charger

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30. View Details

MIG Pulse / Multiprocess 202 Welder

Discover the Power of Pulsed MIG Welding with the MIG Pulse/Multiprocess 202 At Canaweld, we pride ourselves on pushing the boundaries of welding technology to deliver cutting-edge solutions for the oil and gas industry. Our latest innovation, the MIG Pulse/Multiprocess 202, introduces the revolutionary Pulsed MIG welding method, taking your welding experience to new heights. The Magic of Pulsed MIG Welding Pulsed MIG welding is a non-contact transfer method that offers unparalleled precision and control. Unlike traditional methods, the electrode never touches the weld puddle. Instead, high-speed manipulation of the electrical output of the welding machine creates a pulsing effect that delivers consistent and flawless welds. This groundbreaking technology ensures minimal material distortion, making it ideal for welding thin stainless steel and aluminum sheets without compromising on quality. Intelligent, Portable, and Versatile The MIG Pulse/Multiprocess 202 is not your average welding machine. It is a powerful, portable, and intelligent unit designed to cater to a wide range of welding needs. With the ability to perform Pulsed MIG welding, Stick, and TIG welding with a lift start, this machine offers unrivaled versatility for your welding projects. Effortless Set-Up, Seamless Welding Thanks to the synergistic (self-balancing) welding parameters, the MIG Pulse/Multiprocess 202 provides a fast and accurate set-up every time. Welding thin stainless steel and aluminum sheets is a breeze with minimal material distortion, even at 0.030-inch (0.76 mm) or more. The unit can store up to 99 personalized welding programs, making it perfect for students or fast-paced production shops that require quick and efficient job settings. Intelligent Welding at Your Fingertips The MIG Pulse/Multiprocess 202 boasts digital control of welding parameters with synergic curves preset based on the material, gas, and wire diameter used. The built-in polarity changeover feature for most common gas and gasless wires enhances welding flexibility, while the smart "PROGRAM" key allows for quick program selection. With a high-grade metal dual drive roll system, precise and constant wire feed is guaranteed, preventing bird nesting and improving efficiency. Eco-Friendly and Efficient Our commitment to environmental responsibility is evident in the MIG Pulse/Multiprocess 202. The "Energy saving" function operates the power source cooling fan only when necessary, reducing energy consumption and ensuring sustainable welding practices. Top-Notch Features for Your Convenience We understand that your welding projects demand the best tools, which is why the MIG Pulse/Multiprocess 202 comes with a range of features to enhance your welding experience: • 8-inch (203 mm) Wire Spool Size with optional 12-inch (305 mm) compatibility for extended welding tasks. • Voltage Reduction Device (VRD) for added safety during operation. • Spool gun compatibility for trouble-free welding with aluminum. • A durable metal face panel that ensures longevity and protection. Your Investment is Protected We stand by the quality and reliability of our products, which is why the MIG Pulse/Multiprocess 202 comes with a comprehensive 3-year warranty. Your welding machine is protected, giving you peace of mind and confidence in your investment. Experience the Future of Welding Join the league of welding professionals who have embraced the power of Pulsed MIG welding with the MIG Pulse/Multiprocess 202 from Canaweld. Unlock the potential of your welding projects with cutting-edge technology and precision performance. Choose Canaweld for welding excellence. Invest in the MIG Pulse/Multiprocess 202, and elevate your welding capabilities to new heights. Experience the welding revolution today! View Details

Tailor Made Gas Solutions

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions. View Details

9 5/8" Hydraulic Set Large Bore Retrievable Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for 9 5/8” Casing

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer engineered for 9 5/8” casing, providing enhanced flow capacity and efficient wellbore isolation for production, injection, and zonal isolation applications. Designed to maximize flow efficiency while maintaining well integrity, this packer is set hydraulically by applying tubing pressure, eliminating the need for mechanical tubing manipulation. The expanded internal diameter minimizes flow restrictions, making it an ideal solution for high-rate production and injection wells. Once set, the multiple packing element systemensures a mechanically locked, long-lasting seal, maintaining pack-off force throughout its operational life.

To prevent movement under differential pressure, the hydraulic hold-down pistons engage after setting, while the body lock ring secures the setting force, ensuring bottom-hole pressure variations or tubing contraction do not affect the seal. The large bore design allows for unrestricted flow paths, improving overall reservoir performance and artificial lift system efficiency. This makes it particularly valuable in ESP, gas lift, and other high-flow applications, where maintaining maximum production rates is critical.

For retrieval, operators can use a straight upward pull or an optional right-hand rotational release for controlled removal, reducing the risk of stuck tools and minimizing intervention time. With its high-capacity flow path, secure hydraulic setting, and efficient retrievability, the HPL-1 packer for 9 5/8” casing is an optimal solution for operators looking to enhance well performance, reduce pressure losses, and maintain long-term well integrity.

View Details

Isolation Packer HP-2 Hydraulic Set 7" Packer

Setting Mechanism

The Ballycatter WC-HP-2 Isolation Packer is hydraulically set, meaning it is activated using tubing pressure rather than mechanical manipulation. During deployment, the packer is run into the wellbore as part of a stacked packer system, positioned above another hydraulic retrievable packer.

Once in place, hydraulic pressure is applied through the tubing, which compresses the packing element system, forcing it outward against the casing wall. Simultaneously, the slips engage to anchor the packer in position, ensuring a secure, pressure-tight seal within the isolation zone. The hydraulic setting eliminates the need for tubing rotation, making it particularly effective for deviated wells or conditions where mechanical manipulation is restricted.

Once set, the packer remains mechanically locked in place, independent of trapped hydraulic pressure. This design ensures that differential pressures, wellbore fluid movement, or thermal expansion and contraction do not compromise the seal, maintaining long-term zonal isolation. The packer can be used for treatment, injection, or production operations, providing a stable isolation barrier between zones for efficient fluid control and optimized reservoir management.

Retrieval Mechanism

The WC-HP-2 Isolation Packer is retrieved using a straight-pull shear release system, which allows for efficient and controlled removal without requiring tubing rotation.

When an upward force is applied to the tubing, the shear-release pins disengage, allowing the packing elements to relax and the slips to retract. This mechanical release mechanism ensures that retrieval forces remain unaffected by differential pressure, providing operators with a predictable and reliable method for packer removal.

For added flexibility, the shear-release force can be adjusted before running the packer to accommodate different well conditions.

The compact, debris-resistant design of the packer facilitates smooth retrieval, even in doglegged or deviated wells, reducing the risk of tool sticking.

By providing a simple, efficient release mechanism, the WC-HP-2 minimizes rig time and operational costs, making it a practical and cost-effective solution for multiple-zone completions and casing isolation applications.

View Details

HDI 3200 MGS Differential Monitoring System

The HDI 3200 MGS Differential Monitoring System is a battery-powered, stand-alone device designed to monitor critical pressures and temperature in Mud Gas Separator operations within oil and gas drilling environments. It measures and displays the differential pressure between the liquid seal and mud gas pressure, along with monitoring the mud temperature. These measurements are essential for maintaining safe and efficient separator function, ensuring proper gas-liquid separation, and preventing equipment damage or hazardous conditions.

The system uses accurate and reliable pressure and temperature gauges, with pressure readings displayed in 1 PSI increments. It supports alternate engineering units to meet user preferences or site requirements and provides a 4-20mA output for integration with local or remote monitoring and control systems.

The enclosure is made of a durable polycarbonate/PBT alloy that is impact-resistant and UV stabilized, suitable for harsh field conditions including exposure to sunlight, moisture, and rough handling. Its compact, modular design allows for easy installation and maintenance.

The 3200 MGS Differential Monitoring System is essential in drilling operations for continuously monitoring pressure differences and temperature within Mud Gas Separators. This helps ensure the separator is functioning correctly by preventing gas or liquid buildup that could lead to equipment damage or unsafe conditions. By providing real-time data, the system supports safer drilling processes, reduces downtime, and helps maintain optimal performance in challenging well conditions.

View Details

Bilge Absorbent Boom

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship. View Details

WI Subsurface Safety Valve 2.72 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Pipe Fittings Hex Reducing Nipples Male NPT – 1/8", 1/4", 3/8", 1/2" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Hex Reducing Nipples Male NPT are pipe fittings designed to connect two female-threaded pipes of different diameters while maintaining a secure and leak-resistant seal. The male tapered threads provide a tight connection that prevents fluid leakage, which is especially important in high-pressure systems.


These fittings are widely used in the oil and gas industry, chemical processing, and instrumentation applications where a reduction in pipe size is required without adding extra joints.


They are manufactured from high-quality materials such as stainless steel, brass, and other compatible alloys, ensuring durability and resistance to corrosion. The fittings are precision-machined from bar stock to provide burr-free internal surfaces for smooth flow and to reduce turbulence within the system. Threads are carefully capped and packed to prevent damage during transit.


Hex Reducing Nipples are rated for pressures up to 10,000 PSI and comply with ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228 standards. They are designed for reliable performance in ambient temperatures from -28 to 37°C (-20 to 100°F) and support efficient installation with standard wrenches thanks to the hex shape, which allows secure tightening. These features make them suitable for high-pressure and instrumentation piping systems where both reliability and traceability are required.

View Details

WR-SCSSSV 7 inch FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

BMS Versol M

Introducing BMS VerSol M: The Safe and Effective Solvent for Your Cleaning Needs Cleanstream is thrilled to introduce BMS VerSol M, a safer and more environmentally conscious alternative to harmful solvents such as methylene chloride, acetone, and MEK. Our product is a chemical solvent that provides exceptional cleaning performance while being much safer for the environment than traditional solvents that contain BTEX. BMS VerSol M is a green methylene chloride replacement that is perfect for those who are looking for a more sustainable and safer solution to their cleaning needs. BMS VerSol M is designed to clean corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is highly effective and provides a safer alternative to harmful chemicals like methylene chloride, acetone, and MEK. In addition, BMS VerSol M is a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol M is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol M today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol M and start cleaning with confidence. View Details