Ballycatter.ca - Industrial Equipment

Injection Valve Subsurface Safety 4.48 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Needle Valves Hex Body Series – Male x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Hex Body Series Male x Female are industrial valves designed for precise flow control in high-pressure systems. The hexagonal body allows for standard wrench access, facilitating installation and maintenance. Male and female NPT connections enable integration into various piping systems, commonly used in instrumentation, process control, and oil and gas applications.

These valves are manufactured according to ASME B16.34 standards and type-tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with options for higher pressures. The metal-to-metal body and bonnet seal provides reliable sealing under high pressure and temperature conditions. Materials can comply with NACE MR 01 75, and the valves operate over a temperature range of -50°C to 230°C, with graphite seals available up to 500°C.

Each valve undergoes factory testing for seat and packing leakage using nitrogen gas at 1000 PSI. The valves feature a back-seated stem, rolled threads, and a mirror-finished stem through the packing, ensuring consistent and smooth operation. The removable T-handle reduces torque requirements during operation, and a dust cap protects the stem threads. The hex body and male-female connections provide a standard interface for connection while maintaining secure and leak-resistant operation.

View Details

MC Injection Safety Valve 3-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

CSA 60 unit, Locking FAST charger rack

Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment. View Details

Hydrostatic Bailers

InWaTec Combined: Enhancing Wellbore Clarity with Advanced Hydrostatic Bailer Services In the diverse and demanding world of well servicing, maintaining a clear and functional wellbore is essential for the efficient operation of drilling rigs, workover operations, and production wells. InWaTec Combined stands at the forefront of this vital service with our Hydrostatic Bailer running services, offering a sophisticated solution to the age-old challenge of collecting solids and cleaning the wellbore. The Necessity of Hydrostatic Bailer Operations Hydrostatic Bailers are an integral component in the suite of tools required for effective well maintenance. The principle behind these tools is simple yet ingenious—they utilize the pressure differential created by the well fluid to draw debris into the bailer, effectively removing it from the wellbore. This operation is crucial, as it ensures that the wellbore is free from obstructions that could hinder subsequent interventions or impede production. Versatile Solutions for Onshore and Offshore Operations Whether dealing with onshore wells nestled in the heart of a bustling oil field or offshore platforms braving the open seas, InWaTec Combined’s Hydrostatic Bailer services are designed to adapt to any environment. Our tools and techniques are as versatile as they are effective, ensuring that no matter the location, the cleanliness and functionality of the wellbore can be maintained to the highest standards. Technology-Driven Efficiency InWaTec Combined’s commitment to technological innovation is embodied in our Hydrostatic Bailer services. By employing the latest advancements in well servicing technology, we provide a more efficient and reliable means of wellbore cleaning. This not only optimizes the bailing process but also translates into significant time and cost savings for our clients. Prioritizing Safety and Environmental Stewardship Safety and environmental protection are paramount in all of InWaTec Combined’s operations. Our Hydrostatic Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of responsible operations, especially in sensitive onshore and offshore locations. Your Partner in Operational Excellence Choosing InWaTec Combined for your Hydrostatic Bailer needs means partnering with a company that is dedicated to excellence. Our Hydrostatic Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Clarity in Every Operation In conclusion, InWaTec Combined’s Hydrostatic Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, efficiency, safety, and environmental responsibility, we ensure that your wellbore cleaning operations are performed to the highest standards. Trust InWaTec Combined to deliver clear solutions for your wellbore challenges, ensuring the uninterrupted success and productivity of your operations. View Details

Tubing Hanger Coupling - 4 ½” to 2 3/8”

The 4 ½” x 2 3/8” tubing hanger coupling is a specialized downhole component designed to connect two different sizes of upset tubing within a wellhead assembly. Upset tubing refers to tubing that has thicker, reinforced sections at the ends—called “upsets”—which strengthen the threaded connections and help withstand the mechanical stresses and high pressures encountered during well operations. This coupling provides a secure and pressure-tight transition between a larger 4 ½-inch tubing hanger and a smaller 2 3/8-inch production tubing string, enabling effective management of wellbore fluids and maintaining pressure containment.

Engineered to integrate seamlessly with tubing hanger spools, wrap-around tubing hangers (PTHSW), and ‘PTHS’-type tubing spools, this coupling forms part of a modular wellhead completion system. Its union nut design allows installation by screwing the coupling in place without rotating the Christmas tree, simplifying assembly and reducing the risk of damage during installation.

Both the top and bottom ends of the coupling are threaded to customer specifications, offering flexibility for various well configurations and allowing the installation of back pressure valves to maintain well control during operations. Manufactured to API standards and constructed from high-grade materials, the coupling delivers durability and reliable performance in demanding downhole environments characterized by high pressure, temperature, and corrosive fluids.

By facilitating a smooth and strong size transition between different tubing strings, the 4 ½” x 2 3/8” tubing hanger coupling supports well integrity, operational efficiency, and safety throughout oil and gas production.

View Details

Flange of various sizes and specifications for use in industrial environments

Flange connections are one of the best options for pipe end connections that have bends that are subjected to very high lateral forces inclined to cause the loosening of the assembly. Flanges are used instead of welded connections to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently). Upgrading threaded connections to flanged connections increases reliability and integrity while maintaining operational flexibility. View Details

Provix Lanyard

Elevate Your Gear with the Provix Lanyard – A Versatile Accessory from Wisdom Mining Equipment Provix is proud to introduce the Provix Lanyard (model NWI-PRX-LANYARD), a simple yet essential accessory for miners and professionals in various industries. Designed to fit Cap Light models 2, 3, and 4, this lanyard is a versatile tool to enhance the functionality and safety of your essential equipment. Enhanced Security and Accessibility The Provix Lanyard is expertly crafted to provide a secure way to carry your cap lights. Whether you’re navigating through a mine or working on a construction site, this lanyard ensures that your light source is always within reach. It’s an excellent solution for preventing loss or damage to your cap lights, making your workday more efficient and worry-free. Universal Compatibility Designed with versatility in mind, the Provix Lanyard is compatible with Wisdom Cap Light models 2, 3, and 4. This broad compatibility makes it an invaluable accessory for a wide range of professional lighting needs, ensuring that your cap light is always handy, no matter the model. Durable and Reliable Constructed from high-quality materials, the Provix Lanyard is built to endure the challenging conditions of mining, construction, and other demanding work environments. Its durability and reliability make it a trusted companion in any professional setting. Lightweight and Comfortable The Provix Lanyard is lightweight and comfortable to wear, ensuring that it doesn't add any unnecessary bulk or discomfort to your gear. Its user-friendly design makes it easy to attach and detach from your cap lights, offering convenience and ease of use. A Must-Have for Professionals The Provix Lanyard is more than just an accessory; it’s an essential tool for anyone who relies on helmet-mounted lighting. Ideal for mining, construction, outdoor adventures, and more, this lanyard is a practical addition to your professional equipment. Get Your Provix Lanyard Today Visit Provix to secure your Provix Lanyard and keep your cap lights safe and accessible. Enhance the functionality of your mining equipment with this simple yet effective tool. Check out our website at www.provix.net for more information and to explore our wide range of high-quality mining equipment. View Details

Work Barge in European waters

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

HP-1 Hydraulic Set 9 5/8 inch Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Wisdom EX Cap Lamp

BlueROV2 by Blue Robotics

Unleash the Depths with BlueROV2 We are thrilled to introduce the BlueROV2, a versatile and high-performance Remotely Operated Vehicle (ROV) designed and built by the renowned experts at Blue Robotics Inc. Engineered to deliver exceptional value, the BlueROV2 is a testament to innovation, reliability, and affordability in the world of subsea exploration. Excellence in Stock and Ready to Ship! We understand that time is of the essence in subsea operations, which is why we have BlueROV2 units ready to ship immediately. Need an ROV tomorrow? Count on us to have one dispatched today. Meticulous Assembly and Testing The BlueROV2 is more than just a remarkable product; it represents the culmination of expertise and craftsmanship. Each unit is carefully assembled by our skilled technicians, who take pride in their work to ensure every detail is perfect. Before shipping, each BlueROV2 undergoes rigorous testing, calibration, and a comprehensive factory acceptance test to meet the highest standards of quality and performance. Explore the Configuration The BlueROV2 comes with a powerful and agile 6 thruster frame, offering you unparalleled maneuverability in the water. Crafted from robust aluminum tubes, the frame is built to endure the demanding conditions of underwater environments. The Newton Gripper enhances your ROV's capabilities, allowing you to interact with the underwater world effortlessly. Illuminate your subsea adventures with 4 Lumen lights, providing excellent visibility even in the darkest waters. To ensure seamless operation, we've equipped the BlueROV2 with a specially modified tether quick disconnect for hassle-free connections. With 150m of tether on a reliable reel, you have the freedom to explore vast distances below the surface. Your Complete ROV Package We believe in providing you with everything you need to embark on your underwater missions immediately. When you choose the BlueROV2, you get more than just the ROV; you receive a comprehensive package to enhance your subsea experience: 1. BlueROV2 as Configured: Ready to dive and explore right out of the box. 2. Fathom Spool with 150m Tether: Experience the freedom to roam with a generous length of tether. 3. 1 Battery + Charger: Stay powered up and keep your ROV running smoothly. 4. Upgraded Tools and Spares Kit: We've included essential tools and spares to keep your ROV at peak performance. 5. Seahorse Wheeled Transport Cases: Secure and transport your BlueROV2 effortlessly with foam-padded cases. Specifications • Shipping Dimensions: o Case 1 (ROV): 29”x 23”x 16”, 55lbs o Case 2 (Reel/Tether): 29”x 23”x 16”, 53lbs o Case 3 (Batt/Spares/Tools): 24”x 16”x 10”, 25lbs Assurance of Quality The BlueROV2 comes with a 90-day limited warranty, ensuring your peace of mind as you embark on your underwater adventures. Embrace Exploration with the BlueROV2 Are you ready to dive into the wonders of the deep? The BlueROV2 is your gateway to an awe-inspiring subsea world. Let the BlueROV2 be your trusted companion for your most ambitious subsea projects. Contact us today to dive deeper and discover the BlueROV2 difference! View Details

Mini Hydraulic Power Unit

Empowering Your ROV: Introducing the Mini-HPU (Hydraulic Power Unit) We are committed to pushing the boundaries of subsea exploration and ensuring that your ROV missions are equipped with cutting-edge technology. Our latest innovation, the Mini-HPU (Hydraulic Power Unit), is designed to deliver unmatched power and reliability, elevating the capabilities of your hydraulic manipulators and tools on larger ROVs. Compact Powerhouse Don't let the size fool you! The Mini-HPU may be compact, but it packs a powerful punch. With a robust 3 horsepower output, this little dynamo is built to handle the most demanding subsea tasks with ease. The Mini-HPU provides the muscle you need to operate hydraulic manipulators and tools on larger ROVs effectively. Integrated Efficiency Efficiency is the name of the game, and the Mini-HPU excels in this aspect. Integrated within its sleek design is a convenient 1-gallon reservoir, ensuring an uninterrupted flow of hydraulic fluid to keep your operations running smoothly. No need to worry about external reservoirs, as everything you need is perfectly contained within this powerful unit. Adjustable Pressure Relief and Replaceable Filters We understand the importance of adaptability in your subsea operations. The Mini-HPU features an adjustable pressure relief valve, allowing you to fine-tune the pressure to suit your specific needs. Additionally, we've equipped this hydraulic power unit with easily replaceable filters, ensuring that your system stays clean and optimized for peak performance. Reliability at Its Core We believe in building products that stand the test of time. The Mini-HPU is no exception. Its high reliability fixed displacement pump ensures consistent and dependable performance, allowing you to focus on your mission without worrying about equipment failures. Unleash Your ROV's Potential With a maximum pressure of 2,500 PSI and a maximum flow of 1.6 gallons per minute (standard pump), the Mini-HPU is a formidable force in the subsea realm. It's designed to tackle a wide range of applications, from deep-sea exploration to intricate industrial tasks. Corrosion-Resistant Design The subsea environment can be harsh and unforgiving, but the Mini-HPU is ready for the challenge. Our engineers have crafted the unit with anodized aluminum, providing exceptional corrosion resistance and eliminating the need for additional paint coatings. Your Trusted Subsea Partner The Mini-HPU is a testament to our commitment to delivering advanced solutions that elevate your capabilities and redefine what's possible in the underwater world. Experience the Mini-HPU Difference Ready to take your ROV missions to new depths? Explore the power and versatility of the Mini-HPU and unlock a world of possibilities for your subsea operations. Contact us today and witness the next level of subsea performance with the Mini-HPU by your side. View Details

Hard Hat with full brim drillers hard hat and 6 point ratchet strap

This drillers hard hat is made of polyethylene with a six-point ratchet suspension type. This hard hat is available in green, is size 6 1/2 to 8, and meets CSA Z94.1-2005 standards. ANSi classification is Type 1 Class E This brim offers 360-degree protection from falling objects, chemical splash, and weather elements like the sun and rain. Full brim hard hats allow for added protection from the elements without reduced visibility. These hard hats also provide more protection against falling objects and the sun by providing more shade than a cap style helmet. Pricing is based on minimum order of 20, for smaller orders please make contact for alternatives. View Details

Slickline Swivel Joint

Unlocking Efficiency in Downhole Operations: HOCA Oil Tools B.V.'s Advanced Slickline Swivel Joints In the dynamic landscape of downhole operations, the role of slickline swivel joints becomes pivotal in ensuring seamless, efficient, and safe wireline operations. HOCA Oil Tools B.V., a renowned name in the oil and gas industry, stands at the forefront of delivering cutting-edge slickline solutions. Our array of slickline swivel joints is designed to meet and exceed the operational demands and challenges faced by our clients. Pioneering Slickline Swivel Joints: HOCA Oil Tools B.V. offers an extensive range of slickline swivel joints, including the Type ‘HO’ and ‘HD’ swivel joints, engineered to minimize wireline twisting during downhole operations. This not only enhances safety but also improves operational efficiency by reducing the risk of wireline entanglement and breakage. Key Benefits of Our Slickline Swivel Joints: Reduced Wireline Twisting: Our swivel joints significantly reduce the twisting of wireline, thus minimizing the risk of operational downtime and wire breakage. Enhanced Operational Safety: By preventing wireline kinks and twists, our swivel joints contribute to safer downhole operations, protecting both personnel and equipment. Increased Efficiency: Smooth wireline operations ensure quicker job completion and reduced non-productive time. Durability and Reliability: Made from high-grade materials, our swivel joints withstand harsh downhole conditions, ensuring long service life and reliability. Versatility: Available in various sizes and configurations, our swivel joints cater to a wide range of downhole requirements and wireline types. Ease of Integration: Designed for easy integration into existing tool strings, our swivel joints facilitate seamless operations without the need for extensive modifications. Main Features of HOCA's Slickline Swivel Joints: Type ‘HO’ Swivel Joint: Designed to minimize wireline twisting, available in sizes from 1” to 2 1/2", with threaded connections for easy installation. These swivel joints feature top sub, pin, ball connector, ball sub, and bottom sub components, ensuring robust performance and ease of maintenance. Type ‘HD’ Swivel Joint: Similar to the Type ‘HO’ but designed for even more demanding environments, with ‘QLS’ - ‘RQLD’ connections, providing additional strength and durability. These swivel joints are also available in sizes from 1 1/2” to 2 1/2", tailored for heavy-duty operations. At HOCA Oil Tools B.V., we understand the complexities of downhole operations. Our slickline swivel joints are a testament to our commitment to innovation, safety, and efficiency. Embrace the future of wireline operations with HOCA, where performance meets reliability. Contact us today to learn more about how our slickline solutions can optimize your operations. View Details

SCSSSV – 2 3/8” Surface-Controlled Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 2 3/8" Surface-Controlled Subsurface Safety Valve (SCSSSV) is designed to shut in a well in the event of uncontrolled flow caused by equipment failure or damage. Installed in the upper wellbore, it provides emergency closure of the producing conduits to isolate the wellbore if there is a failure or damage to surface production control systems.

This valve uses a self-equalizing, surface-controlled, flapper-type mechanism that closes reliably when hydraulic control pressure is lost. The flapper is made from solid bar stock and has sealing surfaces located outside the flow path when open, which helps reduce erosion and extends the valve’s service life. It is rated for working pressures up to 10,000 psi.

The valve fits 2 3/8" (60.33 mm) tubing and is installed in landing nipples with seal bore options of 1.710" or 1.875". Valve internal diameter options are 0.62" or 0.75", allowing selection based on flow requirements. The wireline retrievable design permits servicing or replacement of major valve components without pulling the entire tubing string, reducing intervention time and operational disruption.

This valve is typically used in wells with smaller tubing sizes that require dependable emergency shut-in capability. Its design balances reliability, durability, and ease of maintenance to provide effective well control in a variety of well conditions.

View Details

4” Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4-inch Surface-Controlled Subsurface Safety Valve (SCSSV) is designed for installation in wells with 4-inch production tubing and serves as a critical safety device to shut in the well during uncontrolled flow events caused by equipment failure or loss of surface hydraulic control pressure. The valve operates via a hydraulically actuated flapper mechanism that remains open under normal operating pressure but closes automatically if the hydraulic signal is lost. This fail-safe design isolates the wellbore, preventing unintended release of hydrocarbons and protecting both personnel and the environment.

The flapper mechanism is simple and robust, minimizing moving parts in the flow path and reducing potential points of failure. When open, the sealing surfaces are positioned out of the fluid flow path, which helps maintain smooth production flow and reduces wear on sealing components. The valve’s hydraulic actuation allows reliable operation under varying pressure and flow conditions commonly encountered in oil and gas wells.

The valve is wireline retrievable, which means it can be removed, serviced, or replaced using wireline tools without the need to pull the entire tubing string from the well. This capability significantly reduces well intervention time and associated costs while allowing maintenance or upgrades to be performed efficiently.

This SCSSV fits standard landing nipples with a seal bore of 3.313 inches and is rated for working pressures up to 5,000 psi. Its internal valve diameter is 1.75 inches, providing an appropriate balance between flow capacity and structural integrity for wells with moderate to high flow rates. The 4-inch tubing size is common in many oil and gas production wells, making this valve size versatile across different field conditions.

This size is commonly applied in production wells where 4-inch tubing is standard, supporting reliable well control and efficient maintenance. Its hydraulic surface control and simple flapper design contribute to dependable operation under varying well conditions.

View Details

Stud Welder CAD 81

Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence! View Details

ROV Remote Operated Vehicle for subsea and dive activities

ROV's are underwater machines that can be used to explore ocean depths while being operated remotely by someone at the waters surface by means of an umbilical. Remote operated vehicles provide high quality images and video of subsea infrastructure and can be used to manipulate valves and tools to operate and maintain oil and gas infrastructure. ROV's are used in a wide range of industrial applications and marine research activities without the challenges experienced by human divers. View Details

Equipped Containers

Introducing Sivam's modified shipping containers - the perfect solution for anyone in need of a portable, efficient, and reliable office space that stands out from the crowd! Our secure modular offices are not your average office space - they're built from durable shipping containers that are modified to suit your needs. Whether you're looking for a portable site office or a unique office space that sets your business apart, Sivam's modified shipping containers are the perfect choice. Thanks to their portable design, our shipping container offices can be easily moved from site to site, giving you the flexibility to set up your office wherever you need it. And with our commitment to efficiency, you can trust that our offices are designed to maximize productivity and minimize wasted space. But don't let their unique design fool you - our shipping container offices are also incredibly secure. We understand the importance of protecting your valuable assets, which is why we build our offices to the highest security standards, giving you peace of mind that your equipment and documents are safe and secure. At Sivam, we pride ourselves on our commitment to quality and customer satisfaction. That's why we work closely with our clients to design and build offices that meet their exact needs, ensuring that every detail is taken care of. So if you're in need of a portable, efficient, and reliable office space that sets your business apart, choose Sivam's modified shipping containers. Contact us today to learn more about how we can help you take your business to the next level! View Details

Truck Oil Absorbent Spill Kit

The spill kit contains, 10 Pads 8” x 19” 2 Sorbent Socks 3” x 4 ft 1 Pair Nitrile Gloves 2 Disposal Bags Pads 8” x 19” Deploy these absorbent pads on liquid spills, especially those involving oil-based substances. Their dimensions and absorbent properties make them effective in quickly containing and cleaning up spills, contributing to a cleaner and safer environment. Whether as part of an emergency response kit or for routine maintenance, these absorbent pads provide a practical solution for liquid cleanup needs. The absorbent pads come in a pack of 10, with each pad measuring 8 inches by 19 inches. This size provides practical coverage for various applications. 2 Sorbent Socks 3” x 4 ft Whether as part of an emergency kit or for routine maintenance, these Sorbent Socks offer a practical solution for managing liquid spills. Quantity: The package contains 2 Sorbent Socks, offering a practical quantity for spill response. Dimensions: Each sock is 3 inches in diameter and 4 feet in length, providing versatility in deployment. Material: Made from sorbent materials designed to effectively contain and absorb liquid spills. Hydrophobic Nature: Repels water, focusing on absorbing oil-based substances. Adaptability: Mouldable model allows the socks to conform to different surfaces and shapes. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 2 Disposal Bags Includes 2 Disposal Bags, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bags are employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. Disposal Bags contribute to maintaining a clean and safe workspace by facilitating the responsible disposal of materials that have met spills. Truck Oil Absorbent Spill Kit Used in industrial settings, transportation and areas dealing with hazardous materials. View Details

D6 Bulldozer

POWER TRAIN Fully-automatic 4-speed transmission Cat C9.3B diesel engine Double reduction planetary final drives Hydraulic reversing fan OPERATOR ENVIRONMENT Fully redesigned cab, sound suppressed, with Integrated Roll Over Protective Structure (ROPS) Full-color 10-inch (254 mm) liquid crystal touch screen display Integrated rearview camera Adjustable operator controls/armrests Cab mounted modular Heating/Ventilation/Air Conditioning (HVAC) system Added storage areas Electrohydraulic implement and steering controls Cloth seat Lights - 6 LED CAT TECHNOLOGY Slope Indicate Product Link, Cellular Grade Control Ready Cab Remote Control Ready Remote Flash/Remote Troubleshoot Operator ID Machine Security - Passcode Compatibility with radios and base stations from Trimble, Topcon, and Leica Capability to install 3D grade systems from Trimble, Topcon, and Leica UNDERCARRIAGE Redesigned track roller frame SERVICE AND MAINTENANCE Rear access ladder Shovel holder Ground level service center 30-minute cab removal Fire extinguisher mounting provision Ecology drains Underhood work light HYDRAULICS Independent steering and implement pumps Load sensing hydraulics ATTACHMENTS Ripper-ready rear hydraulics View Details

FRN 3-1/2 inch Subsurface Safety Valve WR

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Ball Valve Panel Mounted – 2-Way Tube OD Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

This 2-way panel-mounted ball valve with Tube OD connections is designed to control, start, or stop fluid flow in oil and gas tubing systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or bypass lines.

The Tube OD connections allow direct attachment to tubing without additional fittings, simplifying installation and reducing potential leak points. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves are centralized or where physical access to the tubing is limited.

The valve features a floating ball design that ensures leak-proof shut-off under high-pressure conditions. Standard working pressure is 6000 PSI. It is designed and tested to ASME B16.34 for pressure-temperature ratings, and valve ratings follow ASME Process Piping Code B31.3. The valve has been type tested to MSS-SP-99 and offers a temperature range from –40 °F to 450 °F (–40 °C to 232 °C).

Operation is simple with a quarter-turn handle, providing fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Each valve is factory tested pneumatically with nitrogen gas at 1000 psig for seat and stem leakage, with a maximum allowable leak rate of 0.1 sec/min. Optional additional tests, such as vibration, temperature, and helium, are available.

The valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments. Heat code traceability ensures material verification and quality assurance.

View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 24-28 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Fiber Optic Splice on Connectors

Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts. View Details

Check Valve Poppet Type – Male x Female 1/2" NPT – 6000 PSI – ISO 9001

The 1/2" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism provides fast response and a positive seal under pressure, protecting pipelines, pumps, and equipment from reverse flow and pressure fluctuations.

The 1/2" size is suitable for medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required. Male × female connections enable secure inline installation and integration into existing piping systems without additional fittings, reducing potential leak points and simplifying system layout.

The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adaptation to system requirements. Construction materials include corrosion-resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures quality and material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Rod Sentinel - Rod Pump SCSSV

Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV. View Details

Multiprocess 231 SLM Welding Machine

Double Block & Bleed Valve – Flange x Flange – Ball Isolation with Needle Drain – 3/4” (DN 20) – Class 150 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve Flange x Flange 3/4” (DN 20) with Ball isolation and Needle drain provides dual isolation in oil and gas piping systems. The first ball isolates upstream flow while the second ball isolates downstream flow. The needle drain vents trapped pressure between the two isolation points, making it suitable for instrument or gauge isolation, chemical injection, or sampling in operations where maintenance or measurement is required without interrupting the main process.

This specific 3/4” (DN 20) valve is rated for Class 150 service. It has a flange diameter of 100 mm, a bore of 69.9 mm, a flange thickness of 15.9 mm, and uses four bolts of 1/2” size. The face-to-face length is 203 mm. It is manufactured from materials compatible with oil and gas environments and meets ASME B16.34, API 6D, and ISO 17292 standards for pressure-temperature performance and reliability.

View Details

Double Block & Bleed Valve – Flange x Thread – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block and Bleed Valve with Flange x Thread connections and Ball x Ball isolation with Needle Drain is a compact assembly designed to provide dual isolation in oil and gas systems. The two ball valves ensure reliable upstream and downstream shutoff, while the needle drain allows controlled venting, sampling, or pressure release between the isolation points. This design reduces the number of flanged joints and potential leak paths, improving safety and reliability in instrument and process applications.

The valve is available in sizes from ½ inch to 2 inch and pressure classes from 150 to 2500, making it suitable for a wide range of process conditions. It can be manufactured in various materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, and can be supplied to meet NACE MR-01-75 requirements. The assembly is built to recognized standards including ASME B16.34, API 6D, and ISO 17292 and is tested to ensure proper operation, minimal leakage, and long service life.

This valve is ideal for instrument isolation, gauge protection, chemical injection, sampling connections, and other applications where safe and reliable dual isolation is required. Its compact and integrated design reduces installation complexity, simplifies system layout, and provides a safer and more efficient solution compared to assembling individual valves.

View Details

Xanthum Gum (Liquid and Powder)

Introducing Xantham Gum from Cleanstream – the versatile solution for your drilling and completion needs. As a leader in providing innovative and environmentally responsible solutions for the oil and gas industry, Cleanstream is proud to offer this unique polymer for rheology modification, hole cleaning, and solids suspension. What sets Xantham Gum apart is its ability to provide excellent friction reduction – a feature that is unmatched by most other polymers in oilfield drilling and completion applications. Additionally, it can be used in most types of water-based fluids, making it an incredibly versatile product for your operations. Our in-house laboratory facilities allow us to determine the right approach to solve your specific problem. And at Cleanstream, we are committed to developing eco-friendly solutions for as many applications as possible. Whether you need Xantham Gum for a specific project or require our personnel and equipment for complete execution, we have you covered. Click on the datasheet for more information or contact us to learn how Xantham Gum can benefit your operations. Trust Cleanstream for innovative and sustainable solutions for your oil and gas needs. View Details

HDI 1000P Pressure Gauge System

The HDI 1000P Pressure Gauge System is a battery-powered, intrinsically safe electronic gauge used to monitor high-pressure systems in oil and gas operations. It measures pressure using a strain gauge sensor and provides real-time readings on a digital display with both numeric and bar graph formats. Common applications include choke manifolds, cementing units, coiled tubing, and high-pressure pumping systems.

With pressure ranges available from 5,000 psi up to 30,000 psi, the 1000P is suitable for demanding environments. It offers ±0.5% full-scale accuracy, and optional 4-20mA or 0–1 VDC outputs for integration with PLCs or remote monitoring systems. The unit is housed in a sealed stainless steel enclosure and built to perform reliably in harsh, high-vibration field conditions.

Designed for ease of use, the 1000P includes a field-replaceable battery pack and supports a range of connection types such as 2" 1502, 2002, 2202, or flanged. Its solid-state platform minimizes maintenance and ensures consistent performance over time, making it a dependable tool for critical pressure monitoring tasks.

View Details

Wireline Drift

Maximize Well Integrity and Performance with HOCA Oil Tools' Tubing Drifts In the complex and demanding environment of oil and gas extraction, ensuring the integrity and functionality of downhole tubing is paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance the safety, efficiency, and productivity of your operations. Our Tubing Drifts stand out as a testament to our commitment to quality and precision in downhole slick line tools. HOCA’s Tubing Drifts: Precision Engineered for Optimal Performance Tubing Drifts are essential tools designed to ensure the clear passage within downhole tubing, preventing costly blockages and ensuring the smooth operation of subsequent downhole tools and processes. Made from high-quality materials and engineered to meet rigorous industry standards, HOCA Oil Tools’ Tubing Drifts are designed to provide accurate measurements and clearances, ensuring your tubing is free from obstructions and ready for operation. Experience the HOCA Difference in Downhole Operations At HOCA Oil Tools, our mission is to provide the oil and gas industry with downhole tools that exceed industry standards and meet the complex demands of modern drilling and extraction processes. Our Tubing Drifts embody this mission, offering precision, reliability, and efficiency to enhance your downhole operations. Incorporating HOCA’s Tubing Drifts into your downhole tool inventory signifies a step towards optimized well maintenance, enhanced safety, and increased operational efficiency. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your success with innovative solutions and expert service. Choose HOCA Oil Tools’ Tubing Drifts for your downhole operations and join the ranks of satisfied customers who trust our tools to maintain the highest standards of well integrity and performance. Elevate your downhole operations with HOCA Oil Tools – where quality meets innovation. View Details

Laboratory Services

Cleanstream's State-of-the-Art Laboratory Facility Offers Fast, Accurate and Environmentally-Friendly Solutions for NORM and LSA Contaminants Cleanstream is proud to announce the opening of its own laboratory facility, which offers quick and accurate identification of (NORM) sediments and deposits in and on materials and equipment. Our experts quantify and provide an environmentally-friendly solution from our product portfolio to ensure that your property is cleaned with the utmost safety and efficiency. Our laboratory services and analyses cater to all types of materials, both NORM contaminated and non-NORM contaminated. Basic Identification Our laboratory performs an analysis of metallurgy and scale deposits, including NORM / LSA samples, to identify the most effective treatment method for steel metallurgy, sediment/deposit identification, and soil characteristics. Solubility and Compatibility Analysis We perform solubility tests with our environmentally-friendly products and report on their performance. Our various eco-friendly products are readily available from our stock. Features of Cleanstream Laboratory Our laboratory is authorized to analyze NORM / LSA samples and provides screening of chemical dissolvers. We are proud of our fast turnaround time and can supply laboratory analyzes as a standard with product purchase. With Cleanstream's state-of-the-art laboratory facility, you can rest assured that your property will be treated with the most advanced and eco-friendly solutions available. Our goal is to ensure your safety while minimizing environmental impact. Trust Cleanstream for all your NORM and LSA decontamination needs! View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

4 1/16 inch Gate Valve rated to 5000 psi operating pressure

Gate valves are an energy-efficient valve option, as the movement direction or ram is perpendicular to the media flow direction. As a result, less power is consumed when opening or closing the gate valves in comparison to globe valves. Due to their energy-efficiency, they help reduce total ownership cost. View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Shear Up Pulling Tools for External Fishing Necks

Elevate Downhole Operations with HOCA Oil Tools' Shear Up External Fishing Neck Pulling Tools In the demanding environment of oil and gas extraction, operational efficiency and equipment reliability are paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance downhole operations. Our Shear Up External Fishing Neck Pulling Tools are designed to revolutionize the retrieval of downhole equipment, ensuring a seamless operation and enhancing well productivity. HOCA's Shear Up External Fishing Neck Pulling Tools: Engineered for Superior Performance Our Shear Up External Fishing Neck Pulling Tools are specifically engineered for the safe and efficient retrieval of downhole equipment featuring external fishing necks. These tools are indispensable for operators seeking to enhance operational efficiency and safety. Crafted with precision and built from high-grade materials, our Shear Up Pulling Tools are designed to withstand the harsh conditions of the downhole environment, ensuring reliability and durability in every operation. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to excellence and innovation in every product we offer. Our Shear Up External Fishing Neck Pulling Tools epitomize this commitment, providing operators with a reliable solution for the retrieval of downhole equipment. By integrating our tools into your downhole operations, you gain not just a product but a partner dedicated to enhancing your operational success. With HOCA Oil Tools, you can expect products that not only meet industry standards but exceed them, ensuring your operations run smoothly, safely, and efficiently. Our Shear Up Pulling Tools are a testament to our dedication to quality, performance, and customer satisfaction. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied customers who rely on our Shear Up External Fishing Neck Pulling Tools to elevate their downhole operations. Partner with us, and unlock the full potential of your downhole activities with tools designed for success. With HOCA Oil Tools, elevate your operational capabilities and embrace a future of enhanced efficiency, safety, and cost-effectiveness in downhole operations. View Details

Newton Grabber ROV Manipulator

Unleash the Power of Precision: The Newton Grabber We're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need The priority is simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Quality As pioneers in subsea robotics, we consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration. View Details

Micro Hydro Turbine

A SIMPLE WATER-TO-WIRE SOLUTION This micro hydro solution is based on both proprietary designs in the turbine and drivetrain, and off-the-shelf components, to deliver a complete water-to-wire system. This solution is a self-contained module made of single or twin turbines, generators, electrical cabinet, and is connectable to BOP/Grid. They are assembled and mounted in a self-stabilized concrete structure requiring no civil works. The system power output is 480 V, 3-phase AC, 50 Hz & 60 Hz. This new, highly cost-effective, renewable energy solution, capable of capturing most of the untapped energy on your site, has many assets. Its performance levels have been tested both in laboratory and on site. Actual power rating and instantaneous output depend mainly on water velocity (>1 m/s). In our catalogue of product, we can select the best options to suit a particular site. This technology is scalable by equipping an existing canal with dozens or hundreds of 5 to 15 kw modules. Land usage Turbines are installed on existing, untapped water infrastructures. No land planning is needed, with no modification required on existing assets. Predictable and available Permanent, predictable and controllable production with 95% availability. *information from manufacturer View Details

Hydraulic Set Large Bore Retrievable 7” Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for Enhanced Performance

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer, designed to optimize production, injection, and zonal isolation applications. Its expanded internal diameter provides increased flow capacity, reducing pressure drop and improving overall well efficiency. The packer is set using tubing pressure, eliminating the need for tubing manipulation and making it particularly effective in low hydrostatic head wells where conventional setting methods may be challenging. Once engaged, the multiple packing element system ensures a mechanically locked, high-integrity seal, sustaining pack-off force throughout its operational life.

To maintain wellbore stability, the hydraulic hold-down pistons engage after setting, preventing movement due to differential pressure. The body lock ring securely traps the setting force, ensuring that bottom-hole pressure fluctuations or tubing contraction do not compromise the seal. The large bore configuration makes the HPL-1 packer especially suited for high-volume production, deviated wells, and applications requiring unrestricted flow paths for enhanced reservoir performance.

For retrieval, operators can apply a straight upward pull or utilize the optional right-hand rotational release, depending on well conditions. The shear release mechanism enables controlled removal, minimizing downtime and reducing the risk of stuck tools. With its large-bore capability, secure hydraulic setting, and reliable retrievability, the HPL-1 packer is a high-performance solution for maximizing production efficiency, minimizing flow restrictions, and optimizing well completions.

View Details

Wifi Setup

Revolutionizing Wireless Connectivity in the Oil and Gas Industry with Nulux Network Solutions In an era where instant and reliable connectivity is paramount, especially in the meticulous domain of the oil and gas industry, seamlessly integrated wireless networks are not a luxury but a necessity. Navigating through the intricate operational matrices and colossal data, Nulux Network Solutions proffers unparalleled WiFi setup services, ensuring your wireless connectivity is robust, reliable, and resilient. Nulux: A Vanguard in Wireless Solutions Through our profound expertise in devising wireless systems and infrastructure, Nulux has become synonymous with impeccable wireless communication links. Whether it’s through point-to-point or multipoint radio networks, tower construction/rigging, or mesh networks, our dedicated team ensures that geographical and physical impediments become inconsequential in your communication and data transmission endeavors. Wi-Fi Access Points: A Linchpin of Operational Efficacy Navigating through bustling work environments in the oil and gas sector necessitates the deployment of wireless networks that are not only widespread but also impeccable in terms of performance and reliability. With Nulux’s unparalleled experience in the design and deployment of wireless networks, seamless connectivity transcends your office and permeates every corner of your operation - whether it be the warehouse, facility floor, or field sites. Deciphering Point to Point and Multipoint Configurations In the context of wireless networking: Point to Point (P2P) networks furnish a direct linkage between two nodes, ensuring streamlined communication and data transmission between them. This configuration, touted for its enhanced security, due to the dedicated nature of the connection, and increased productivity, ensures your data travels securely and uninhibited from one point to another. Multipoint configurations, on the other hand, establish a connection amongst more than two points, with a single line shared amongst multiple nodes. This configuration can be particularly beneficial in scenarios that demand centralized data access across various points. The Nulux Promise: Connectivity Beyond Boundaries Tethering on our commitment to ensuring your operations are perpetually connected and data transmissions are ceaselessly secure and reliable, our WiFi setup services promise: Ubiquitous Connectivity: Ensuring every node, regardless of its geographical positioning, is perpetually connected. Robust Security: Safeguarding your data transmissions against potential cyber threats and ensuring they traverse through a secure network. Operational Efficiency: Through our WiFi setups, we ensure your operational matrix, be it documentation review, QA-QC, or project planning, is continually enhanced and refined. Cost-Effective Solutions: Ensuring your wireless network, whether it be a point to point or multipoint configuration, is not only operationally beneficial but also financially viable. In the intricate and operationally critical realm of the oil and gas industry, ensuring your wireless connectivity is not only robust but also reliable and secure, is paramount. With Nulux Network Solutions, you’re not merely adopting a WiFi setup; you’re embedding a network that promises operational excellence, secure data transmissions, and an enhanced operational matrix. Connect with Nulux today and ensure your operations are always connected, your data transmissions always secure, and your wireless network is always reliable. View Details

Pneumatic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Gas Turbine LM2500+ DLE 50Hz 2x CC

The LM2500+ DLE 50Hz Combined Cycle 2x1 system combines two LM2500+ dry low emissions gas turbines, each coupled with a Heat Recovery Steam Generator (HRSG), to power a single steam turbine. This high-efficiency configuration is engineered to meet larger capacity needs, delivering reliable, low-emission power with rapid startup capability.

At the core of this system is the LM2500+, an uprated version of the LM2500, featuring a 17-stage compressor. The addition of a forward-stage blisk increases airflow by approximately 20% at full power. This enhancement boosts the compressor pressure ratio from 18:1 to 23.1:1, contributing to higher overall efficiency and output.

Downstream of the compressor, the engine incorporates a fully annular combustor with externally mounted fuel nozzles, a two-stage air-cooled high-pressure turbine driving the compressor and gearbox, and a six-stage low-pressure power turbine aerodynamically coupled to extract energy from the high-energy exhaust flow. To accommodate the increased output, key design changes were made to the power turbine, including aerodynamic blade optimizations and rotor strengthening.

The Dry Low Emissions (DLE) system plays a crucial role in minimizing environmental impact. Its triple annular combustor lowers flame temperature, reducing NOx and CO emissions without water or steam injection—improving both thermal efficiency and maintainability.

Together, this 2x1 configuration offers a scalable solution for utility and industrial operators seeking clean, efficient, and dependable power generation at higher capacities.

View Details