The Gauge Root Bleed Valve with vent tube and handle is a high-pressure valve designed to provide safe venting and pressure release in industrial and oil and gas systems. It is typically installed in high-pressure piping where pressure gauges or instruments are connected, allowing operators to isolate and safely bleed off pressure for maintenance, calibration, or inspection. The vent tube directs released media away from the operator, reducing the risk of injury or contamination, while the handle provides easy and precise manual operation.

This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request, and is constructed with a metal-to-metal body and bonnet seal for reliable sealing at high temperatures and pressures. It features a backseat stem for added security, a self-centering, non-rotating tip to ensure leak-free performance, and a simple adjustable gland retainer to maintain packing stability over time.

Factory testing includes pneumatic tests with nitrogen at 1000 PSI to verify seat and packing integrity, with a maximum allowable leak rate of 0.1 sec/min. The valve materials can be supplied in stainless steel or other corrosion-resistant alloys and are compatible with NACE MR 01-75 standards. Heat code traceability ensures quality control and material verification for critical applications.

This valve is essential for safely isolating and venting pressure from instruments, gauges, or process line.

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

The Bore Through Male Connector NPT fittings are engineered to create robust, leak-free connections in high-pressure systems. These fittings feature a bore-through design, allowing fluid or gas to flow freely without obstruction, which minimizes pressure drop and ensures consistent system performance. Made from high-quality materials, they are suitable for pressures up to 6000 PSI and are manufactured to meet ASME B16.34, MSS-SP-99, and ASME B31.3 standards.

The NPT (National Pipe Thread) male connection ensures a tight seal when connected to compatible threaded components, providing reliable performance in oil and gas, chemical, and process industries. The fittings are precision-machined for proper ferrule deformation, which ensures leak-free connections under vibration, impulse, or vacuum conditions. Silver-plated threads reduce friction and prevent galling, while the bore-through design supports high flow rates without obstruction.

Bore Through Male Connector NPT fittings are easy to install and maintain. They are finger-tight for initial assembly and then wrench-tightened to achieve a secure seal, reducing installation errors and downtime. Their design allows disconnection and reconnection without compromising sealing integrity, making them suitable for applications requiring frequent maintenance or system modifications.

These fittings are unique in combining full-flow capability, high-pressure performance, and reliable sealing in a compact, easy-to-install form, making them ideal for demanding oil and gas systems, process lines, and high-pressure instrumentation setups.

The Ball Valve Lever Operated – 2-Way Female × Female is a high-performance isolation valve designed for oil and gas piping systems where reliable flow control is essential.

Its female × female connections allow for secure inline installation directly onto male-threaded pipes or fittings, simplifying assembly, reducing the need for additional adapters, and minimizing potential leak points. This configuration is particularly useful in production lines, injection lines, sampling lines, and other pipelines with male-threaded ends.

The valve features a floating ball design that provides seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and efficient with a quarter-turn lever, allowing fast opening and closing with low torque. The internally loaded stem with shoulder prevents blowout, enhancing operational safety, while replaceable seats and packings extend service life. The maximum orifice design also minimizes pressure drop across the valve.

This valve is suitable for a wide range of oil and gas applications, including upstream, midstream, and downstream pipelines. It is factory tested to ensure leak-proof performance and can be supplied to meet NACE MR0175 standards and fire-safe requirements. Heat code traceability ensures quality and material verification for all components, making this valve a dependable and durable solution for industrial environments.

The HDI V9000 Virtual Choke Console System is a PLC-based control and monitoring platform that provides a digital representation of the traditional hydraulic choke console used in oil and gas operations. It integrates Human-Machine Interface (HMI) technology with electronic joysticks, enabling operators to monitor and control choke valves both locally and remotely.

This system supports flexible configurations to meet client requirements, including various console layouts and customizable language options. It is designed to interface not only with standard choke control components but also with additional monitoring equipment such as gate valve position indicators, mud gas separator pressure monitors, and environmental sensors for riser and sub-sea temperatures.

By digitizing choke control, the V9000 enhances operational oversight, allowing for precise valve positioning and real-time status feedback. Its modular architecture permits scalability and adaptation to complex wellsite setups, supporting improved safety and efficiency. The system\'s data logging and reporting features facilitate compliance tracking and operational analysis, making it a comprehensive solution for modern well control management.

The Monoflange SBB Double Block and Bleed Valve with Flange x Thread connections features an OS&Y isolation valve and a needle drain, providing dual isolation in a single compact assembly. It is designed for oil and gas applications where safe venting of trapped pressure between isolation points is required, such as instrument or gauge isolation, chemical injection, and sampling lines.

The valve’s monoflange design integrates both isolation and venting functions in one unit, reducing the number of joints and potential leak paths while saving space and simplifying installation. The OS&Y isolation valve offers clear visual indication of open or closed status, allowing operators to quickly verify valve position. The needle drain provides controlled venting of pressure trapped between the isolation points, ensuring safe operation during maintenance or sampling procedures.

The valve is suitable for flange sizes from 1/2” to 2” and pressure classes from 150 to 2500, with options for reduced or full bore depending on process requirements. It is available in a variety of materials including stainless steel 316, 316L, duplex, super duplex, Hastelloy, Inconel, and Monel, and can be manufactured to meet NACE MR-0175 standards. The design complies with recognized standards such as ASME B16.34, API 6D, and ISO 17292, and is tested to low emission requirements.

This configuration is ideal for oil and gas operations requiring reliable dual isolation, precise venting, and compact installation in critical piping systems.

The Gauge Root Valve Male x Female 1/4” NPT is designed to provide reliable isolation and control for pressure measurement instruments in chemical, petrochemical, and oil and gas applications. It allows a secure connection between the process line and pressure gauges, ensuring accurate readings while preventing backflow and leakage. This size is commonly used where compact instrumentation connections are needed, offering precise control in tight piping configurations.

The valve is constructed and tested according to ASME B16.34 for pressure and temperature ratings and complies with ISO 9001, PED, and ATEX standards, confirming quality and suitability for use in hazardous or pressurized environments. It has a standard working pressure of 6000 PSI, with higher pressures available upon request. The metal-to-metal body and bonnet seal ensures high-pressure and temperature performance, and the self-centering, non-rotating stem tip provides consistent shutoff for leak-free operation.

Additional design features include a simple, adjustable gland retainer for stable packing, a back seat for added security, a removable T-handle for low torque operation, and a dust cap to protect the stem from contamination. All valves are 100% factory tested for seat and packing leakage using nitrogen gas at 1000 PSI, ensuring reliable performance. This valve is ideal for isolating and protecting pressure measurement instruments.

The 2 Valve Manifold H Type Flange to Flange is designed for use in the oil and gas industry to connect impulse lines and transmitters. Its simple two-valve configuration allows operators to perform essential tasks such as blocking, bleeding, and calibrating static pressure transmitters or gauges with ease. This design ensures accurate and reliable measurement while minimizing the risk of leaks or process interruptions.

The H Type manifold features a metal-to-metal body and bonnet seal, which provides a secure seal under high pressure and temperature conditions, eliminating the need for O-ring seals. The valves are designed with a self-centering, non-rotating tip to provide consistent positive shutoff and reduce wear on the packing. The stem includes a back seat for added safety, and a removable T-handle ensures smooth operation with low torque. A dust cap protects the stem from contamination, and rolled threads improve durability and ease of operation.

These manifolds are manufactured to meet ASME B16.34 standards for pressure-temperature ratings and are type tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with higher pressures available upon request. Materials can be supplied in accordance with NACE MR 01 75, and temperature ratings range from -50°C to 230°C, or up to 500°C with graphite. Every valve is factory tested for leakage and performance, and heat code traceability ensures quality and reliability. 

The Square Body Needle Valve Female x Female is engineered for precise flow control in high-pressure fluid systems commonly found in the oil and gas industry. Its design features a robust square-shaped body, which provides stability during installation and operation, reducing the risk of leaks and mechanical stress. The female x female configuration allows the valve to connect two female-threaded pipes or instrumentation components directly, eliminating the need for additional adapters and simplifying system layout.

The valve operates with a fine-threaded stem that provides smooth, accurate regulation of fluid flow, enabling controlled start, stop, and throttling functions. A metal-to-metal body bonnet seal ensures reliable sealing at high pressures and temperatures, while the back-seated stem and self-centering tip deliver consistent, leak-free shutoff.

These valves are suitable for a range of applications, including instrumentation, process monitoring, sampling, and control systems, where precise flow control and reliable operation are critical. The square body design also facilitates easy wrench access and torque application, making installation and maintenance straightforward in complex piping arrangements.