Ballycatter.ca - Industrial Equipment

Pipe Fittings Hex Nipples Male NPT – 1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

The Hex Nipple Pipe Fitting with Male NPT threads is a precision component used to connect two female-threaded pipes or fittings in instrumentation and process control systems. The male tapered threads create a tight, leak-resistant seal when engaged with a corresponding female NPT connection, making it suitable for high-pressure and high-temperature applications commonly found in the oil and gas industry.

Manufactured from high-quality bar stock, the fitting provides strength and durability. Threads are capped and carefully packed to prevent damage during transport. The fitting is marked with the manufacturer’s name, size, material, and heat code for traceability. The design ensures proper thread engagement, reliable sealing, and smooth flow of fluids or gases.

These fittings meet or exceed ASME B1.20.1 standards for NPT threads and are rated according to ASME B31.3 for process piping, supporting safe and consistent operation in industrial environments. The male NPT design allows easy installation while maintaining a durable, leak-tight connection over the life of the system.

View Details

3-1/2 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Hydraulic Set Production Packer

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) is a state-of-the-art downhole tool engineered to deliver the robustness of a permanent packer with the added convenience of retrievability. Designed for high-pressure (up to 15,000 psi) and high-temperature (up to 450°F) environments, this hydraulic-set packer is ideal for challenging well conditions.

Key Features:

• Anti-Preset Mechanism: Ensures the packer remains unset until a predetermined tubing pressure is applied, preventing premature setting during deployment.

• Anti-Reset Functionality: Upon release, a snap ring engages the mandrel, locking the lower cone in place to keep the barrel slip retracted, facilitating smooth retrieval.

• Propped Element Design: Offers superior sealing capabilities, maintaining integrity under extreme conditions.

• Barrel Slip Configuration: Located below the elements, it uniformly distributes loads to the casing, enhancing stability and performance.

• Metal-to-Metal Backup Shoes: Provide 360° casing wall contact, ensuring reliable element containment and preventing extrusion.

• No Mandrel Movement Operation: Simplifies the setting process and reduces potential operational issues.

Benefits:

• Eliminates Milling Requirements: The packer can be retrieved without the need for milling, streamlining the retrieval process.

• Enhanced Sealing and Retrieval Reliability: Combines robust sealing mechanisms with dependable retrieval features to ensure operational success.

• Reduced Rig Time: Efficient design minimizes time spent during both completion and decompletion phases, leading to cost savings.

Applications:

• Suitable for hot, corrosive, deep, and deviated wells, whether for production or testing purposes.

• Ideal for scenarios where minimal casing deformation or damage is critical.

• Supports single-trip completions and multi-packer installations.

• Effective for liner top isolation and monobore completions.

Available Sizes:

• Compatible with casing sizes ranging from 5-1/2 inches to 7-5/8 inches.

For detailed specifications, please refer to the product’s specification sheet.

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) stands as a reliable solution for operators seeking a balance between the durability of permanent packers and the flexibility of retrievable systems in demanding well environments.

View Details

Perforating

Optimizing Reservoir Connectivity with InWaTec Combined's Precision Perforating Services In the intricate execution of oil and gas production, establishing a seamless flow path between the reservoir and the wellbore is vital for optimal extraction. At InWaTec Combined, we specialize in precision Perforating Services, a critical step towards ensuring that our clients’ wells are prolific producers. Perforating is a sophisticated process, and its execution is both an art and a science. It involves the precise creation of holes from the wellbore through the casing and cement sheath directly into the producing zone. This process is not merely about making openings; it's about strategically placing them to maximize flow rates and enhance the recovery of hydrocarbons. Our approach to perforating is methodical and tailored. We begin with an in-depth analysis of the well conditions and reservoir characteristics. This data informs our selection of perforating techniques, which range from the conventional to the cutting-edge, including shaped charges and advanced explosive materials that create clean, deep perforations with minimal damage to the formation. InWaTec Combined’s Perforating Services are about more than just punching holes; they are about delivering a highly controlled and effective conduit for hydrocarbons to travel from the reservoir to the surface. With our state-of-the-art technology and expertly engineered charges, we can ensure that the flow path is not just established, but optimized for the specific conditions of each well. Safety and precision are at the heart of our operations. We employ the latest in downhole technology, including real-time monitoring and electric line conveyance, to ensure that our perforations are executed with the highest degree of accuracy and control. This commitment to excellence and attention to detail is why InWaTec Combined is a leader in the field. By entrusting InWaTec Combined with your perforating needs, you are not just choosing a service provider—you are choosing a partner dedicated to enhancing the productivity of your wells. Our Perforating Services are integral to preparing your wellbore to be a strong link between the hidden riches of the reservoir and the energy needs of the world. Let us bring our expertise and precision to bear on your operations, and together, we can unlock the full potential of your assets. View Details

Wireline Stems

Elevating Downhole Precision: HOCA Oil Tools B.V.'s Slickline Stem Solutions In the intricate arena of oil and gas extraction, downhole operations necessitate tools that promise not only precision but also unwavering reliability. HOCA Oil Tools B.V. takes pride in offering a sophisticated range of slickline stems that cater to a myriad of operational needs, ensuring unmatched performance and safety. Our expertise in crafting these essential tools is evident from the wide array of slickline stems available, designed to enhance the efficiency and safety of wireline operations. Benefits of Using HOCA's Slickline Stems: Enhanced Downhole Control: Our stems provide the necessary weight to ensure smooth and controlled movements of the tool string within the wellbore, enhancing operational precision. Versatility for Various Applications: From standard solid bars to specialized options like lead or tungsten filled, our range caters to different well conditions and requirements. Optimized Performance: The added weight helps counteract wellbore pressure, improving the impact and effectiveness of downhole tools, particularly in jarring operations. Increased Safety: Proper use of slickline stems reduces the risk of wireline snapping and other operational hazards, ensuring a safer environment for field personnel. Durability in Harsh Conditions: Manufactured with high-quality materials, our stems are designed to withstand the demanding conditions of downhole environments. Customization Options: Available in various sizes and materials, our stems can be tailored to meet the specific needs of each operation, ensuring maximum efficiency and effectiveness. Main Features of HOCA's Slickline Stems: Type ‘A’ Stem (Weight Bar): Offers solid bar configurations ideal for standard operations, providing necessary weight to the tool string with threaded connections for easy integration. Type ‘BO’ Lead Filled Stem: Incorporates lead within the stem to add substantial weight, ideal for deeper or more challenging well conditions, ensuring better control and impact. Type ‘EO’ Roller Stem: Features external rollers to minimize friction and wear during operations, enhancing the stem's longevity and performance in deviated wells. Type ‘ED’ Tungsten Filled Stem: Utilizes tungsten to provide maximum weight in a minimal space, perfect for high-pressure wells where additional downforce is required. Customization and Variety: Our stems are available in various lengths, diameters, and thread connections, ensuring compatibility with different tool strings and operational needs. HOCA Oil Tools B.V.'s commitment to quality and innovation is reflected in our slickline stem offerings. By providing a comprehensive range of sizes, materials, and types, we ensure that our clients have access to the tools necessary for their unique downhole challenges. Trust HOCA for your downhole tool needs, where precision meets durability. View Details

Surface Controlled Annular Vent and Sleeve Valve 2 inch

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue. View Details

Stand off Protector

Capacitance Discharge Stud Welder CAD 101

Revolutionize Your Welding Experience with the Canaweld CAD 101 Stud Welding System! When it comes to precision and efficiency in stud welding, the Canaweld CAD 101 is a true game-changer. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled speed, accuracy, and versatility, making it the ultimate choice for welders in the oil and gas industry. The Power of Precision - Capacitor Discharge Stud Welding With a direct-current arc from a capacitor and weld times as quick as 1 to 6 milliseconds, the Canaweld CAD 101 delivers precision like no other. You'll achieve flawless welds without burn-through on the opposite side, even with very thin metals. Ideal for smaller diameter studs and pins, as well as non-standard materials, this system ensures accuracy in every weld. Unmatched Welding Capacity - Ready for Any Task The Canaweld CAD 101 boasts a full 3/8” (M10) welding capacity, making it a powerhouse in the stud welding world. Its compact design enables benchtop or automated applications with Canaweld's auto feed welding head, providing unmatched flexibility and convenience. Plus, it's compatible with any of Canaweld's hand guns, ensuring seamless integration into your welding process. Innovation at Its Core - Advanced Microcontroller Equipped with a cutting-edge microcontroller, the CAD 101 is continually up to date, delivering the latest in stud welding technology. The 15-pin subminiature interface allows for remote triggering, ready signals, and reload circuitry, making automation a breeze. Experience welding efficiency like never before with the CAD 101's industry-leading capacitance-to-weight ratio. The Canaweld Advantage - Unrivaled Features Take a look at the exceptional features of the Canaweld CAD 101: • Weld Range: Accommodates US Stud Size #6 – 3/8”, Metric Stud Size (M3-M10), Stud diameter 0.125″ – 0.375″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 162,000uf Capacitance for powerful and rapid welds • Portable and Lightweight: Weighing only 37 lbs., it's easy to transport and use on-site • Microprocessor Controlled: Ensures precise and consistent welding performance • Remote Triggering: Added convenience for seamless operation • 3.5” Color Display: Easy-to-read and user-friendly interface • Programmable Pre-sets: Save your preferred welding settings for quick access • Resettable Weld Counter: Monitor and track your welding progress • Stepless Voltage Control: Achieve optimal welding settings with ease • Safety Shutdown: Provides protection in case of internal faults • Chuck Saver: Prevents double firing for flawless welds Embrace the Future of Stud Welding with Canaweld CAD 101! At Canaweld, we strive to empower welders with innovative solutions that excel in performance and efficiency. The CAD 101 exemplifies our dedication to excellence and commitment to meeting your welding needs. Upgrade your welding experience and achieve unmatched precision with the Canaweld CAD 101 Stud Welding System. Elevate your welding game with Canaweld - Your Partner in Welding Excellence! View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Warehouse Dolly

Are you tired of searching for the perfect ESP stand for the inspection and maintenance of your electric submersible pumps? Look no further than Sivam! We specialize in providing high-quality ESP stands that are specifically designed to meet the needs of your team. Our ESP stands are built using only the highest quality materials, ensuring exceptional durability and reliability. At Sivam, we understand the importance of precision and accuracy in the maintenance of critical equipment like ESP's, which is why our stands are designed to provide a stable and secure platform for teardown and inspection. We know that convenience and ease of use are important factors when it comes to selecting an ESP stand, which is why we offer adjustable height options to ensure a level working surface. Our stands are also equipped with a range of additional features to help your team work more efficiently, so you can get the job done quickly and effectively. At Sivam, we pride ourselves on providing exceptional customer service. We work closely with our clients to understand their specific needs and design benches that meet their exact specifications. Our commitment to quality and customer satisfaction is unmatched, so you can trust us to deliver the best products and services for your business. Choose Sivam for all your ESP stand needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right! View Details

TIG AC/DC 281 Pulse Welding Machine

Seismic Sensors for Subsea

Unveiling the Depths of Earth's Secrets: Seismic Sensors for Subsea Exploration We are dedicated to unlocking the mysteries of the underwater world and empowering the subsea exploration community with cutting-edge technology. Today, we are proud to introduce our latest innovation - Seismic Sensors for Subsea. These advanced sensors are engineered to delve into the very heart of the ocean floor, bringing you invaluable data for seismic analysis and geological studies. Understanding Earth's Subsurface like Never Before Seismic exploration plays a pivotal role in comprehending the Earth's structure and its dynamic processes. Seismic Sensors for Subsea open up a whole new realm of possibilities, enabling you to gain unprecedented insights into the subsea environment. Whether you're involved in offshore oil and gas exploration, scientific research, or environmental monitoring, our sensors are designed to deliver accurate and reliable seismic data. Robust Design for Extreme Environments Operating in the harsh conditions of the subsea realm demands exceptional durability and reliability. Our Seismic Sensors are meticulously designed and built to withstand the pressures of the deep ocean and maintain optimal performance even in challenging environments. The rugged and robust construction ensures that the sensors can endure the rigors of subsea missions and deliver uninterrupted data acquisition. Seamless Integration with ROV Systems Efficiency is key in subsea exploration, and our Seismic Sensors are designed with that in mind. The sensors seamlessly integrate with your existing ROV system, eliminating any compatibility concerns and streamlining your operations. With easy installation and setup, you can swiftly deploy the sensors and start collecting valuable seismic data in no time. High-Precision Data Acquisition Accurate seismic data is crucial for making informed decisions and conducting thorough analyses. The Seismic Sensors are equipped with state-of-the-art technology that ensures precise data acquisition. The sensors capture seismic waves with exceptional clarity, providing you with detailed information about subsurface structures and geological formations. Customized Solutions for Diverse Applications We understand that every subsea exploration project comes with its own set of challenges and requirements. That's why our team of experts works closely with you to tailor the Seismic Sensors to meet your specific needs. Whether you need sensors for deep-sea research or shallow-water surveys, we have the expertise to provide customized solutions that align with your objectives. Pioneering Subsea Innovation As leaders in subsea robotics, we continues to push the boundaries of exploration technology. With our Seismic Sensors for Subsea, we stand at the forefront of innovation, enabling scientists, researchers, and industry professionals to unravel the mysteries of the underwater world like never before. Explore the Depths of Knowledge Take your subsea exploration to new heights with Poseidon Robotics' Seismic Sensors. Discover the vast potential that lies beneath the ocean floor and gain the knowledge you need to make informed decisions in your field of study or industry. Contact Us Today Unleash the power of seismic exploration with Seismic Sensors for Subsea. Contact our team now to explore how our advanced technology can elevate your subsea missions and pave the way for groundbreaking discoveries. With Ballycatter as your partner, the secrets of the deep ocean are within reach. View Details

Flange of various sizes and specifications for use in industrial environments

Flange connections are one of the best options for pipe end connections that have bends that are subjected to very high lateral forces inclined to cause the loosening of the assembly. Flanges are used instead of welded connections to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently). Upgrading threaded connections to flanged connections increases reliability and integrity while maintaining operational flexibility. View Details

Lock Mandrels for Tubing

Unlocking Efficiency: HOCA Oil Tools' Lock Mandrels for Tubing In the demanding realm of oil and gas operations, ensuring the integrity and functionality of well components is paramount. HOCA Oil Tools, a pioneer in downhole slick line tools, introduces its cutting-edge Lock Mandrels for Tubing – an essential solution designed to enhance the performance and reliability of downhole activities. These tools are engineered for precision, delivering unmatched reliability and performance to meet the rigorous demands of modern well operations. HOCA's Lock Mandrels for Tubing: Precision-Engineered for Superior Performance Our Lock Mandrels for Tubing are designed to securely latch into the tubing string, providing a stable base for various downhole tools and devices. Tailored to accommodate different tubing sizes and pressures, they are essential for the effective management and control of wellbore fluids. Fabricated from high-quality materials and built to withstand the harshest downhole environments, HOCA's Lock Mandrels ensure operational success and longevity. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Lock Mandrels for Tubing means choosing a partner committed to your operational success. Our dedication to quality and innovation ensures that our products not only meet but exceed the expectations set by the demanding oil and gas industry. Incorporating our Lock Mandrels into your tubing operations signifies a step towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just equipment; you gain a strategic advantage supported by our expertise and unwavering commitment to excellence. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who rely on our Lock Mandrels for Tubing to secure their operational success. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole activities. With HOCA Oil Tools, empower your downhole operations with tools that redefine reliability, efficiency, and performance in the oil and gas industry. View Details

7" Mech-2 Double Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Slickline Jars

Maximizing Downhole Efficacy with HOCA Oil Tools B.V.'s Slickline Jars In the ever-evolving landscape of oil and gas exploration and production, the precision and reliability of downhole operations are paramount. At HOCA Oil Tools B.V., we pride ourselves on our extensive expertise and innovative solutions in the field of slickline technology, particularly our diverse array of slickline jars designed to address a wide range of downhole challenges. Unparalleled Benefits of HOCA's Slickline Jars: Enhanced Operational Efficiency: Our jars significantly reduce non-productive time by enabling more effective and quicker responses to downhole sticking issues. Improved Downhole Dynamics: With the capability to deliver upward and downward jarring forces, our slickline jars optimize the impact on the obstruction, ensuring successful resolution of downhole incidents. Versatility Across Conditions: Designed for a variety of wellbore environments, our jars ensure optimal performance regardless of the downhole conditions. Superior Material and Construction: Crafted from high-grade materials, our jars withstand the extreme pressures and temperatures encountered downhole, ensuring durability and longevity. Customization for Specific Needs: Our extensive range accommodates different sizes and operational requirements, ensuring that every operation has the precise tool needed for the job. Safety and Reliability: Engineered to meet rigorous industry standards, our slickline jars enhance the safety and reliability of wireline operations. Diverse Array of Slickline Jars: Hydraulic Jars: Ideal for controlled, consistent jarring actions in sticky situations, providing the necessary force while minimizing risk to the toolstring and wellbore. Mechanical Jars: Known for their robustness and reliability, suitable for a variety of downhole conditions, offering immediate response to obstructions. Spring-Loaded Jars: Designed for situations requiring fast, sharp impacts, these jars are perfect for dislodging stuck tools or debris. Intensifier Jars: Amplify the impact force, ideal for extreme conditions where additional power is needed for jarring actions. Bi-Directional Jars: Capable of delivering both upward and downward forces, providing versatility and efficiency in clearing obstructions. At HOCA Oil Tools B.V., our commitment to innovation, quality, and customer service is at the core of our business philosophy. Our slickline jars are testament to this commitment, designed not only to meet but exceed the operational demands and challenges faced by our clients in the oil and gas industry. With HOCA Oil Tools B.V., you are choosing a partner dedicated to providing you with the best in slickline technology solutions. Explore our range of slickline jars and discover how we can enhance the efficiency and safety of your downhole operations. View Details

LM2500+G4 SAC 50Hz CC 1x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

View Details

Shipping Containers for multiple purposes, 20 foot and 40 foot standard or hi-cube

A shipping container is a container with strength suitable to withstand shipment, storage, and handling. Shipping containers range from large reusable steel boxes used for intermodal shipments to the ubiquitous corrugated boxes. The 20ft shipping container is the most popular and widely used container. It’s the smallest of the standard container range and is the most popular choice for intermodal transport, as it’s the easiest to move around. The 40ft high cube container is a taller version of the 40ft container, and is great for moving over-height cargo (up to 2.7m or 8.1ft tall). View Details

LM2500 GG Gas Generator

The LM2500 Gas Generator is the core component of the LM2500 gas turbine, responsible for producing the high-energy gas flow needed to drive the power turbine. It features a 16-stage axial compressor that efficiently compresses incoming air, a single annular combustor where fuel and air mix for optimal combustion, and a two-stage high-pressure turbine that extracts energy to power the compressor.

Designed for durability and high performance, the LM2500 Gas Generator supports a wide range of fuel types, including natural gas and liquid fuels, enabling flexible operation in various industrial and marine settings. Its modular construction allows for easier maintenance and faster engine removal or replacement, minimizing downtime.

With advanced aerodynamics and robust engineering, the LM2500 Gas Generator delivers reliable, efficient gas flow, helping ensure consistent power output and lower emissions across demanding operating conditions.

View Details

Cranes of various sizes and ratings for onshore lifting and placement

Mobile cranes can be used to access narrow passages and navigate project sites that have limited space, making them a practical solution for many industries, site conditions, and materials. Let us help manage your crane and material handling requirements for your project. View Details

StimStixx HotStixx

Are you tired of dealing with stubborn paraffin buildup in your wells? Look no further than HotStixx by StimStixx Technologies. Our cutting-edge product utilizes a specially formulated solid acid stick to deliver heated acid vapor with pinpoint accuracy at the zone of interest, creating a powerful combination of pressure and heat downhole to eliminate paraffin buildup. HotStixx is engineered to tackle paraffin-related challenges head-on. The heated acid vapor, generated by our innovative technology, interacts with paraffin deposits, breaking them down effectively. The precise delivery of pressure and heat ensures maximum penetration, targeting the problematic areas with unparalleled accuracy. Witness the power of HotStixx as it removes paraffin buildup, revitalizing your well's performance. As the heated acid vapor does its job, it quickly vaporizes and becomes fully spent down-hole. Thanks to its high reactivity and relatively low volume, no residual contaminated effluent remains. This eliminates the need for post-treatment clean-up or disposal, reducing environmental risks and streamlining your operations. With HotStixx, you can confidently overcome paraffin challenges while minimizing downtime and maximizing efficiency. Say goodbye to costly and time-consuming maintenance associated with paraffin buildup. With StimStixx Technologies, you can focus on optimizing production and enhancing your well's performance. Join the ranks of forward-thinking industry leaders who trust HotStixx by StimStixx Technologies to eliminate paraffin buildup effectively and efficiently. Experience the power of precision pressure and heat, and unlock the true potential of your wells. The future of paraffin removal starts here. View Details

S-KWIK Control Line and Cable Protector

SP TR Surface Controlled Subsurface Safety Valve 6-5/8 inch

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

Oil Only Absorbent Spill Kit - 41 Gallon

The Oil Only Absorbent Spill Kit - 41-Gallon contains, The 41-Gallon Oil Only Absorbent Spill Kit is a comprehensive solution for managing medium-sized spills in marine environments, refineries, and loading docks. Designed for versatility and effectiveness, the kit includes, 50 Absorbent Pads (8” x 11.5”) Versatile pads for quick and efficient absorption of oil-based liquids, ideal for various spill scenarios. 4 Sorbent Socks (3” x 4Ft) Specially designed to contain and absorb spills, particularly in confined or challenging areas. 8 Pillows (18” x 18”) Large pillows for absorbing and retaining significant quantities of oil, enhancing spill response efficiency. 1 Pair of Nitrile Gloves Essential personal protective equipment for safe handling during spill cleanup. 5 Disposal Bags Ensures proper containment and disposal of used absorbent materials, contributing to responsible waste management. 1 Gallon Drum (55) A larger containment option for collecting and managing absorbed liquids. Part Number: OH-OOS-41G The kit is specifically tailored for medium spills in marine environments, refineries, and loading docks, offering a comprehensive and efficient response to oil-based spills. Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions. View Details

K Storm Choke 2 inch

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

3" Globe-Style Gas Metering Valve

The 3” Globe-Style Gas Metering Valve is designed to deliver accurate and consistent fuel control in industrial gas turbines, including both Dry Low Emissions (DLE) and Single Annular Combustor (SAC) engine types. This valve ensures that the correct amount of gas fuel is metered into the engine based on real-time operating conditions—essential for achieving stable combustion, optimal turbine performance, and reduced emissions.

With an accuracy of ±3% of flow point and a full-stroke response time of 175 milliseconds, it supports precise adjustments to the fuel-to-air ratio, even under fluctuating load conditions. This level of performance is critical for maintaining turbine efficiency, lowering NOx and CO emissions, and supporting regulatory compliance.

The globe-style design allows for smooth fuel flow control, making it ideal for high-capacity, high-pressure turbine applications, such as those found in the oil and gas industry. Built to withstand extreme temperatures and pressures, the valve is available with certifications such as ATEX Zone 1 and 2, PED, UL, and NEC Class 1, ensuring safe operation in hazardous environments.

This metering valve supports modern turbine control systems and is part of a generation of components that prioritize long-term reliability, reduced maintenance needs, and consistent field performance.

View Details

Lamp KL5MS MSHA

Introducing the Wisdom KL5MS MSHA Corded Miner's Cap Lamp – A New Standard in Mining Safety and Efficiency, Exclusively from Provix Provix is excited to unveil the latest addition to its range of high-quality mining equipment – the Wisdom KL5MS MSHA Corded Miner's Cap Lamp. This innovative product is not just a lighting solution; it's a commitment to safety, efficiency, and reliability in the demanding world of mining. Exceptional Lighting for Enhanced Safety Equipped with a powerful 7,800mAh battery, the KL5MS MSHA guarantees 13 hours of continuous lighting, ensuring that miners are never left in the dark. The main light LED, with a working voltage of 3.0V and current of 640mA, delivers a luminous flux of 340 lm. The impressive lighting degree of 18,000 lx at 1 meter enhances visibility significantly, making it a vital tool for miners. MSHA & ATEX M1 Certified for Maximum Safety The KL5MS MSHA goes above and beyond when it comes to safety. It is both MSHA (Mine Safety and Health Administration) and ATEX M1 certified, meeting the highest safety standards in the mining industry. This certification underscores our commitment to providing equipment that ensures the utmost safety of miners in potentially hazardous environments. Built to Last in Harsh Conditions Durability is a key feature of the KL5MS MSHA. The lamp has a main light lifespan of 50,000 hours and an auxiliary light lifespan of 40,000 hours. Its IP68 water-proof rating and explosion-proof design make it ideal for use in various mining conditions. Additionally, the battery life spans 1,200 cycles, ensuring long-term reliability. Ergonomically Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL5MS MSHA is designed for comfort. Its compact dimensions (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure it is not cumbersome, allowing for mobility and ease during long shifts. Efficient and Convenient Charging The KL5MS MSHA is as practical as it is powerful. It features a convenient USB charging system, enabling quick and easy recharging. The charging time of 4 to 7.5 hours ensures the lamp is ready for use with minimal downtime. Get Yours Today The Wisdom KL5MS MSHA Corded Miner's Cap Lamp is available now at Provix. Visit our website at www.provix.net, call us, or email for more information. Elevate your mining operations with the Wisdom KL5MS MSHA – where safety and efficiency meet. View Details

Chemical Injection Unit

Our chemical injection units can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these chemical injection units are highly reliable and easy to operate. Clients use our chemical injection units for corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, nitrate injection, and more. These skids are rated for offshore and desert conditions and can be customized for specific operating areas. View Details

Transport Trucking services for local and international equipment hauling

Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment. View Details

Stranded Gas Virtual Pipeline

Maximize the Value of Your Stranded Gas with Lovat Gas Solutions Stranded gas, trapped in wells that are isolated from pipeline infrastructure, represents an untapped opportunity for producers. At Lovat Gas Solutions, we specialize in helping companies unlock the value of their stranded gas assets. If you have idle gas wells and are seeking to realize the potential value of this resource, we are here to assist you in developing a production and revenue plan. Stranded gas wells can present unique challenges, but they also hold significant potential. To extract value from these assets, a well-designed plan is essential. Our team of experts at Lovat Gas Solutions has the knowledge and experience to help you navigate this process and develop a comprehensive production and revenue plan for your stranded gas. Why choose Lovat Gas Solutions for your stranded gas needs? 1. Specialized Expertise: We understand the complexities and nuances of stranded gas projects. With our specialized expertise, we can assess the unique characteristics of your stranded wells and design a customized plan to extract and monetize the gas effectively. 2. Value Optimization: Our goal is to help you maximize the value of your stranded gas assets. By developing a production and revenue plan tailored to your specific situation, we aim to unlock the full potential of your resources and generate a significant return on investment. 3. Comprehensive Support: From the initial evaluation to the execution of the plan, Lovat Gas Solutions provides end-to-end support. Our team will collaborate closely with you, offering guidance and assistance at every stage of the process to ensure a seamless and successful outcome. 4. Sustainable Approach: We prioritize environmental sustainability in all our operations. Our plans for stranded gas production are designed to comply with regulatory standards and minimize any potential impact on the environment. We are committed to helping you extract value from your stranded gas assets while maintaining responsible and sustainable practices. Take the first step towards unlocking the value of your stranded gas assets. Contact Lovat Gas Solutions today, and let our team of experts develop a production and revenue plan that suits your specific needs. With our specialized expertise, comprehensive support, and commitment to sustainability, we are the partner you can rely on to maximize the potential of your stranded gas resources. Trust Lovat Gas Solutions to transform your idle gas assets into valuable sources of revenue. View Details

DeltaV Backbone Infrastructure

Double Block & Bleed Valve – Flange x Flange – Ball Isolation with Needle Drain – 1/2” (DN 15) – Class 150 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve with Flange x Flange connections and Ball x Ball isolation with Needle drain is designed to provide reliable dual isolation in oil and gas applications. This valve allows two points of isolation in a single assembly, reducing leak paths and ensuring safe maintenance downstream of the first isolation point. The integrated needle drain safely vents any trapped pressure between the two isolation valves.

This valve is available in flange sizes from 1/2” (DN 15) and can be used in applications requiring Class 150 ratings. Reduced and full bore options are offered to accommodate varying flow requirements. The design is suitable for direct or remote mounting of instruments, chemical injection connections, gauge isolation, instrument drains, and piping/instrument interfaces.

Manufactured in materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can also meet NACE MR-0-175 requirements where corrosion resistance is necessary. The assembly conforms to recognized standards including ASME B16.34, API 6D, and ISO 17292. Its compact design allows easier installation in space-constrained environments while minimizing stress from loading or vibration.

This configuration is particularly useful in oil and gas operations where dual isolation is needed for maintenance, sampling, or chemical injection, providing a safe and efficient solution in instrument and piping systems.

View Details

5" HP-6 Hydraulic Set High Angle Production Packer for 11.5-15 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Subsea X-mas Tree for subsea oil and gas developments

Subsea Christmas Trees, both standard and horizontal are available in current stock and can be shipped worldwide. The subsea x-mas tree is designed for the highest level of reliability with manual rov overrides and retrievable chokes these trees are ready for installation in the most demanding environments. If you require subsea trees, consider the time and cost savings of utilising our existing inventory. View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Hornet Packer

The mechanically set HORNET™ packer offers ease of operation with quarter-turn right to set and release. Converting it for wireline-setting applications is simple and inexpensive. The HORNET packer provides for landing in compression, tension, or neutral positions. Every component from the jay track, to the internal bypass, to the packing-element system and the upper slip assembly has been developed to ensure the HORNET’s setting and releasing reliability. The HORNET EL packer is run and set on electric line using an E-4™ (Product Family No. H43702) with a slow-set power charge or a J™ setting tool (Product Family No. H41371) and a special wireline adapter kit. An L-10™ type on/off seal nipple is run on top of the packer to connect the tubing to the packer and to house a blanking plug when the packer is used as a temporary bridge plug. We can source from current stock or direct from the manufacturer. View Details

5 1/2" HP-5 Hydraulic Set Production Packer 15.5-20 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly. Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Bigbore 7 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

NIU - Pipe Inspection ROV

Introducing the NIU ROV: Your Ultimate Pipe Inspection Solution The NIU ROV - The Pipe Inspection Remote Operated Vehicle. Engineered to excel in pipe and tunnel inspections, the NIU ROV sets new standards for versatility, precision, and efficiency in the subsea industry. Unleash the Power of NIU ROV The NIU ROV is purpose-built to navigate the intricate and challenging environments of pipes and tunnels. With its compact design, this remarkable ROV can effortlessly maneuver through a 12-inch diameter pipe, providing unparalleled access to previously hard-to-reach areas. From industrial pipelines to underwater tunnels, the NIU ROV is your go-to solution for comprehensive inspections. Unparalleled Performance The NIU ROV is equipped with state-of-the-art technology and robust features that ensure exceptional performance in every operation. Its advanced thrusters enable precise movement and control, allowing operators to conduct inspections with utmost accuracy. The powerful onboard lighting system ensures crystal-clear visibility even in the darkest and murkiest conditions. Efficiency Redefined We understand the value of time and efficiency in subsea operations. The NIU ROV is designed to streamline your inspection processes, significantly reducing downtime and operational costs. Its ease of deployment and user-friendly interface enable quick setup and seamless integration into your inspection workflows. Tailored for Pipe and Tunnel Inspections Unlike generic ROVs, the NIU ROV is engineered specifically for the unique challenges of pipe and tunnel inspections. Its rugged construction and protective measures safeguard it from potential hazards encountered in these confined environments. With the NIU ROV, you can confidently conduct inspections with minimal risk and maximum efficiency. Cutting-Edge Technology The NIU ROV incorporates cutting-edge technology, including high-resolution cameras, to provide a comprehensive view of the inspection area. Its real-time data transmission capabilities allow operators to monitor and analyze data on the surface, making informed decisions on the spot. Unlock New Possibilities with NIU ROV From oil and gas pipelines to municipal infrastructure, the NIU ROV opens up a world of possibilities for inspecting critical subsea assets. Its adaptability and versatility make it an indispensable tool for various industries, including energy, construction, engineering, and more. Choose NIU ROV When you choose the NIU ROV, you not only invest in a top-of-the-line inspection solution but also gain access to our unmatched expertise and support. Our team of subsea specialists is ready to assist you every step of the way, ensuring that you harness the full potential of our advanced ROV technology. Embark on a New Era of Pipe Inspections Step into the future of subsea inspections with the NIU ROV - The Pipe Inspection Remote Operated Vehicle. Experience unparalleled performance, efficiency, and precision in your pipe and tunnel inspections. Contact us today to explore how the NIU ROV can revolutionize your subsea operations. Your success is our mission! View Details

Valve Manifolds 2 Valve Manifold H Type – Flange to Flange – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 2 Valve Manifold H Type Flange to Flange is designed for use in the oil and gas industry to connect impulse lines and transmitters. Its simple two-valve configuration allows operators to perform essential tasks such as blocking, bleeding, and calibrating static pressure transmitters or gauges with ease. This design ensures accurate and reliable measurement while minimizing the risk of leaks or process interruptions.

The H Type manifold features a metal-to-metal body and bonnet seal, which provides a secure seal under high pressure and temperature conditions, eliminating the need for O-ring seals. The valves are designed with a self-centering, non-rotating tip to provide consistent positive shutoff and reduce wear on the packing. The stem includes a back seat for added safety, and a removable T-handle ensures smooth operation with low torque. A dust cap protects the stem from contamination, and rolled threads improve durability and ease of operation.

These manifolds are manufactured to meet ASME B16.34 standards for pressure-temperature ratings and are type tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with higher pressures available upon request. Materials can be supplied in accordance with NACE MR 01 75, and temperature ratings range from -50°C to 230°C, or up to 500°C with graphite. Every valve is factory tested for leakage and performance, and heat code traceability ensures quality and reliability.

View Details

Tube Fittings Bore Through Male Connector NPT Thread – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Bore Through Male Connector NPT fittings are engineered to create robust, leak-free connections in high-pressure systems. These fittings feature a bore-through design, allowing fluid or gas to flow freely without obstruction, which minimizes pressure drop and ensures consistent system performance. Made from high-quality materials, they are suitable for pressures up to 6000 PSI and are manufactured to meet ASME B16.34, MSS-SP-99, and ASME B31.3 standards.

The NPT (National Pipe Thread) male connection ensures a tight seal when connected to compatible threaded components, providing reliable performance in oil and gas, chemical, and process industries. The fittings are precision-machined for proper ferrule deformation, which ensures leak-free connections under vibration, impulse, or vacuum conditions. Silver-plated threads reduce friction and prevent galling, while the bore-through design supports high flow rates without obstruction.

Bore Through Male Connector NPT fittings are easy to install and maintain. They are finger-tight for initial assembly and then wrench-tightened to achieve a secure seal, reducing installation errors and downtime. Their design allows disconnection and reconnection without compromising sealing integrity, making them suitable for applications requiring frequent maintenance or system modifications.

These fittings are unique in combining full-flow capability, high-pressure performance, and reliable sealing in a compact, easy-to-install form, making them ideal for demanding oil and gas systems, process lines, and high-pressure instrumentation setups.

View Details

StimStixx Thru-Tubing 3 1/2

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Treatment Efficiency! Are you ready for a game-changing solution in well treatment? Look no further than Thru-Tubing Acid Stimulation by StimStixx Technologies. Our innovative product offers quick and easy deployment via electric wireline, providing you with a seamless experience from start to finish. We offer two powerful options to meet your specific needs: HCL and HCL/HF acid blends. With our specially formulated solid acid stick, delivered through slickline, wireline, coil tubing, or tractor conveyance, we ensure heated acid vapor is precisely directed to the zone of interest, providing pinpoint accuracy. The secret behind our success lies in the highly reactive nature of our heated acid vapor. It penetrates contaminants and carbonate scale with increased efficiency, resulting in enhanced contact with the formation. The vapor quickly vaporizes and becomes fully spent down-hole, thanks to its high reactivity and relatively low volume. This unique feature eliminates the need for post-treatment clean-up or disposal, ensuring a cleaner and safer operation. But the benefits don't stop there. Thru-Tubing Acid Stimulation offers numerous advantages that will transform your well treatment process. Our technology reduces CO2 emissions, helping you contribute to a greener future. With reduced downtime and simple implementation, you can save valuable time and resources. The increased precision of our product guarantees optimal results, while its fast-acting nature ensures efficient operations. Lower manpower, rig, and equipment costs further enhance the cost-effectiveness of our solution. Additionally, you can bid farewell to worries about corrosion and wear on machinery, as our product minimizes these concerns. And with no surface spillage and reduced exposure to hazardous materials, safety becomes a top priority. Join the Thru-Tubing Acid Stimulation revolution today and experience the unparalleled efficiency and effectiveness of StimStixx Technologies. Trust us to elevate your well treatment process to new heights. View Details

7" Mech-2 Double Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Oclansorb Oil Spill Clean-up Material

Oclansorb is 100% organic and non-toxic material which absorbs oil on contact. This oil absorbent is biodegradable and can be used on land and on water. Oclansorb is made from sphagnum peat moss and will absorb oil and hydrocarbons but not water. It is 15 times more absorbent than clay, translating into one 18 pound bag of Oclansorb being as effective as 450 pounds of clay. This improves the efficiency of clean-up operations as only 1 bag of Oclansorb replaces the shipping and handling of nine 50 pound bags of clay. On land, apply Oclansorb over the area with hydrocarbon contamination and lightly brush the Oclansorb around. The surface can be dry or wet, as Oclansorb does not absorb water. The oil is absorbed on contact, and the captured volumes can be disposed of in landfills or incinerated (as approved by local authorities). On water, cover the oil with Oclansorb as completely as possible. In wavy or flowing conditions, a boom should be used to concentrate the oil. The hydrocarbon will absorb on contact with Oclansorb, and mixing the material to expose more surface area to the hydrocarbons increases absorption. View Details

5 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Lamp KL5MS 1.65

Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.65 meters (5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations. View Details

LANAI Remote Operated Vehicle

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability We understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed. View Details

Tubing Hanger Coupling – 6 5/16” to 2 1/2”

The 6 5/16” to 2 1/2” Tubing Hanger Coupling is a specially made part used in oil and gas wells to connect a large casing opening to smaller tubing—typically 6 5/16 inches—to a smaller 2 1/2-inch upset production tubing. This size combination is often selected for well designs that require a broader casing interface for flow management, safety equipment, or well control hardware, while maintaining a slimmer production string for specific flow requirements or structural considerations.

This coupling is manufactured with upset-end compatibility, meaning it is suited for tubing that has thickened ends designed to strengthen threaded connections. This feature improves mechanical reliability and helps the connection withstand downhole pressure, tensile loads, and thermal cycling. The union nut design allows the coupling to be installed by tightening the nut without rotating the upper wellhead assembly, which is particularly useful in space-constrained or high-integrity environments.

To accommodate a range of operational needs, the coupling can be threaded on both ends to suit different tubing or spool designs and is compatible with back pressure valves—providing added safety during pressure control, intervention, or servicing. Built in accordance with API specifications and from high-strength materials, the coupling is designed to operate reliably in demanding conditions, including high-pressure wells and corrosive environments.

View Details

7" Mech-1 Single Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 32-35 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type