Ballycatter.ca - Industrial Equipment

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

ROV Lift Points

Custom Lift Points: Unparalleled Strength for Your Subsea Lifting Needs When it comes to subsea operations, lifting heavy loads with precision and safety is a paramount concern. At Poseidon Robotics, we are proud to introduce our state-of-the-art Custom Lift Points—a breakthrough in subsea lifting technology. Engineered for exceptional strength and load-bearing capabilities, our Custom Lift Points are built to withstand the most challenging underwater lifting tasks. Strength Meets Customization We understand that no two subsea projects are the same. That's why our Custom Lift Points are designed with versatility and customization in mind. We work closely with you to tailor our lift points to your specific requirements, ensuring that they seamlessly integrate with your subsea equipment, ROVs, or other subsea systems. Load Tested to Perfection Safety is at the core of everything we do. Our Custom Lift Points undergo rigorous load testing to ensure they exceed industry standards and can handle immense weights with ease. Rest assured that our lift points are reliable and dependable, giving you peace of mind during critical lifting operations. A Robust Solution for All Environments Subsea environments can be harsh and unforgiving, but our Custom Lift Points are up to the challenge. Crafted from high-quality materials, our lift points offer excellent corrosion resistance, making them suitable for prolonged underwater use without compromising on strength and performance. Versatility and Adaptability Whether you're dealing with offshore installations, subsea construction, or scientific research, our Custom Lift Points adapt to diverse applications. Their flexible design allows for easy integration into various subsea equipment and systems, giving you the freedom to tackle a wide range of projects efficiently. Experience the Power of Custom Lift Points Embrace a new era of subsea lifting with Poseidon Robotics' Custom Lift Points. With unbeatable strength, unmatched customization, and unwavering safety, our lift points redefine what's possible beneath the waves. Join the Robotics Revolution The Custom Lift Points, load tested to an astounding 55,000 lbs, are here to elevate your subsea lifting capabilities to new heights. Discover the Future of Subsea Lifting Take the next step in your subsea journey. Contact us today to explore the possibilities of our Custom Lift Points and embark on a transformative subsea lifting experience. We lift the world below the surface. View Details

Pumpjack C-1824D-305-240

The Lufkin Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit in the Lufkin line. These units are simple to operate and require minimum maintenance. Unit Size* C-1824D-305-240 A 120.00 B 228.00 C 340.00 E 263.50 F 396.50 H 545.00 I 25.50 J 110.00 L 64.00 M 80.25 N - N1 24.50 R 161.00 T 58.88 U 92.38 V 52.00 W 50.00 X 112.50 AA 51.69 AB 90.88 UU 24.13 VV 57.00 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, Lufkin Oilfield Services refurbishes and sells used pumping units and provides installation, field service, machine shop repair and new OEM parts for its’ customers. All brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. Additionally, Lufkin Automation is the industry leader in oil production automation and well optimization products and services (pump-off controllers, dynamometers, fluid level equipment, well analysis, design/analysis software, well design consulting and training). With the acquisition of Delta-X and Nabla and with thousands of controllers in service, Lufkin Automation continues the Lufkin tradition of helping producers lower their production costs and optimize well efficiency. View Details

Fuel Nozzle for LM2500 Gas Turbine

The 2-cup Fuel Nozzle is a precision-engineered component used in gas turbines, specifically in the oil and gas industry. Its primary function is to inject liquid fuel into the combustion chamber in a fine, atomized spray, allowing for optimal mixing with air and efficient ignition. This ensures stable combustion, better fuel efficiency, and reduced emissions—key performance factors in industrial turbine applications.

The “2-cup” design refers to the nozzle’s dual flow passages, which help balance fuel distribution across the combustion zone. This promotes more uniform flame stability and lowers the risk of hot spots that can cause thermal stress to the turbine hardware. The nozzle is typically used on “base” engines and is suited for continuous-duty operations.

The L47197P05 variant is known for its compatibility with LM2500 turbine configurations and is built to endure harsh operating environments. It features durable materials and a design that withstands high temperatures and pressures commonly found in oil and gas turbine systems.

View Details

U-KWIK Cross Coupling Protector

2 inch Injection Safety Valve

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Electric Submersible Pump Straight Pull 4.5" Packer

The Ballycatter Model WC-ESP Straight Pull 4.5” Packer is a compact, hydraulic-set production packer optimized for ESP completions in 4.5” casing. It features a pass-through section for ESP power cables, allowing seamless electrical connectivity between the surface and the ESP unit below.

The single-mandrel design with Acner Array Packing Element ensures superior sealing integrity, even in high-pressure and high-temperature wells. Its bi-directional slip system resists pressure from both above and below, providing secure anchoring and preventing unwanted movement.

Setting is achieved hydraulically by applying tubing pressure, locking the packer in place for long-term well isolation. Retrieval is simplified through a straight pull mechanism, eliminating the need for complex downhole tools and ensuring fast, efficient removal in standard and deviated wells. Compatible with all major ESP cable pack-off and feed-thru devices, the WC-ESP Straight Pull 4.5” Packer delivers reliability and ease of operation in compact wellbore conditions.

View Details

CSA 60 unit, non-Locking, FAST charger rack

Boost Your Equipment’s Readiness with the CSA 60 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to introduce the CSA 60 Unit Non-Locking FAST Charger Rack (model NWI-NWCR-60BC-SSI), a high-capacity, single-sided charging solution designed for the fast-paced needs of modern mining and industrial operations. This charger rack is engineered to keep your Wisdom lighting equipment fully charged and ready for any task. Rapid Charging for Maximum Efficiency The CSA charger rack is optimized for the WISE LITE2, LAMP3A, and 4A models, offering an impressive charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This quick turnaround is essential for minimizing downtime and ensuring your team's equipment is always operational. High-Capacity Charging Solution With the ability to charge up to 60 units simultaneously, this charger rack is perfect for large-scale operations. Its single-sided design is space-efficient, making it an ideal fit for equipment rooms, charging stations, or any workspace where space is at a premium. Designed for Convenience and Accessibility The non-locking feature of the CSA 60 Unit Charger Rack provides easy and quick access to all charging ports, facilitating efficient management of multiple devices. This accessibility is particularly beneficial in fast-paced work environments where time is critical. Durable and Reliable Construction Built to withstand the demanding conditions of mining and industrial environments, the CSA charger rack is both durable and reliable. Its sturdy construction ensures long-lasting performance, making it a valuable investment for any operation. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and rental equipment providers who need to charge a large number of devices efficiently and reliably. Its high capacity and fast charging capabilities make it an indispensable tool for large teams. Elevate Your Charging Capabilities Today The Wisdom CSA 60 Unit Non-Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to discover more about this efficient and practical charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions. View Details

5 1/2" HP-5 Hydraulic Set Production Packer 15.5-20 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly. Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

ROV Field Training

Dive into the Depths: Enhance Your ROV Skills with ROV Field Training As the underwater frontier beckons with mysteries and challenges, subsea robotics is at the forefront of exploring and unraveling its secrets. At Poseidon Robotics, we believe that knowledge and skill are the cornerstones of successful ROV (Remotely Operated Vehicle) operations. That's why we are proud to present our comprehensive ROV Field Training program, designed to equip you with the expertise to navigate the depths with confidence. Unparalleled Hands-On Experience Our ROV Field Training is a unique opportunity to gain hands-on experience in operating and maneuvering advanced underwater robotics. Under the guidance of our seasoned instructors, you will immerse yourself in the world of subsea exploration, learning practical skills that will empower you to conduct successful missions and overcome real-world challenges. Tailored for All Skill Levels Whether you're a seasoned ROV pilot or just embarking on your subsea robotics journey, our training program caters to all skill levels. Beginners will receive comprehensive instruction on ROV basics, including vehicle setup, navigation, and troubleshooting. Experienced operators will have the chance to refine their skills, learn advanced techniques, and master specialized maneuvers. Customized Training for Your Needs We understand that each organization and project is unique. That's why we offer customized training programs tailored to your specific needs. Our team will work closely with you to identify your goals and objectives, ensuring that the training aligns with your requirements. Whether you're in the oil and gas industry, marine research, or environmental conservation, our training program will be adapted to suit your field. In-Depth Learning Modules Our ROV Field Training covers a wide range of critical topics, including: 1. ROV Operation Fundamentals: Understanding the vehicle components, controllers, and communication systems. 2. Navigation and Maneuvering: Mastering piloting techniques, maintaining stability, and performing complex maneuvers. 3. Mission Planning and Execution: Developing effective mission plans and strategies for successful outcomes. 4. Troubleshooting and Maintenance: Learning to identify and address common technical issues to ensure seamless operations. 5. Safety and Risk Management: Understanding safety protocols, emergency procedures, and risk assessment. Empowering Your Team for Success By participating in ROV Field Training, you are investing in the success of your team and your subsea operations. Our mission is to empower professionals like you with the knowledge and skills needed to unlock the full potential of underwater exploration and achieve remarkable results. Join the ROV Field Training Today Don't miss this opportunity to take your ROV expertise to new heights. Reach out to us today to learn more about our training program and how it can elevate your subsea capabilities. View Details

Gas Blow-Off Valve 24 VDC

The 3” Gas Fuel Isolation Valve is designed for use in industrial gas turbines within the oil and gas sector, serving as a vital safety and control device. It regulates the flow of natural gas or compressor discharge air to the turbine, enabling quick isolation of fuel supply during abnormal or emergency conditions to protect the turbine from damage.

This valve features a three-inch outlet flange and is solenoid-pilot actuated, operating on 24 or 95-140 VDC power. It is engineered to withstand high-pressure environments, with natural gas operation rated up to 900 psig and compressor air up to 640 psig. It also endures elevated temperatures, tolerating heat soak conditions up to 400°F for natural gas and up to 800°F for compressor air applications.

Constructed from stainless steel materials compliant with NACE standards, the valve resists corrosion in harsh operating conditions typical in oil and gas facilities. It meets strict safety certifications, including CE-ATEX Group IIA, Category 3, Zone 2, T3, making it suitable for use in potentially explosive atmospheres.

The valve operates with a rapid opening time of approximately 110 milliseconds and closes within 1 second, enabling prompt response to operational changes or emergency shutdown signals. Typically installed in pairs to provide dual-redundancy, these valves enhance system safety by ensuring backup isolation capability.

Overall, the 3” Gas Fuel Isolation Valve is essential for maintaining safe, efficient, and reliable turbine operation by controlling and isolating fuel or air flow, thereby preventing damage and reducing the risk of costly downtime in oil and gas power generation applications.

View Details

Network maintenance

Guarding the Pulse of Your Operations with Nulux’s Network Maintenance Services Navigating through the unyielding terrain of the Oil and Gas industry demands not merely a communication network that is robust but one that stands unassailable against the test of time and operational strain. For professionals who engineer the vitality of our energy sector, ensuring that every node, every link, and every byte of data pulsates without falter through your networks is paramount. Herein lays the essence of Nulux Network Solutions’ pristine Network Maintenance services. Catalyzing Sustainability through Robust Network Health With a relentless devotion to facilitating an unobstructed flow of products, solutions, and services across the complete energy value chain, Nulux is unwaveringly committed to escorting our customers on the voyage towards a future where sustainability and operational excellence coalesce seamlessly. In the domain of Fiber Optic communication, where the tiniest of signal attenuations can cascade into significant operational impediments, maintaining the unyielding health of your network becomes imperative. And this is where our Network Maintenance services shine, illuminating your operations with the assurance of unbroken, reliable connectivity. Embracing Nulux’s Network Maintenance: A Fortification of Reliability Aligning with Nulux’s Network Maintenance services infuses your operations with: Proactive Safeguarding: Our technical mavens, with a fine-tuned acumen honed by over two decades in the industry, provide proactive monitoring and mitigation strategies, ensuring that potential issues are neutralized before they can reverberate through your operations. 24/7 Vigilance: In an industry where every second is critical, our 24/7 monitoring and support stand as your unwavering sentinel, ensuring that come what may, your network's integrity remains unassailable. Bespoke Maintenance Protocols: Our network maintenance solutions are not generic but are meticulously tailored to resonate with the specificities of your operations, ensuring that our maintenance protocols echo with the unique requirements of your network architecture. Minimized Downtime: With an arsenal of cutting-edge diagnostic tools and an experienced team that specializes in rapid response and resolution, we ensure that any potential downtimes are not merely addressed but are minimized to a negligible whisper. Embarking on an Uninterrupted Operational Journey with Nulux At Nulux Network Solutions, our network maintenance services go beyond mere problem resolution; we dive into the very fabric of your communication networks, ensuring that every fiber, every connection, and every data transmission is enveloped in a cocoon of reliability and unyielding operational excellence. In an industry where data transmission is as vital as the energy being harnessed, Nulux stands as your partner, ensuring that the pulse of your operations, your communication networks, perpetually remain vibrant, secure, and impeccable. Choose Nulux, and navigate through your operational journey with the assurance that the lifelines of your communication are not merely maintained but are guarded, fortified, and optimized, ensuring every operational heartbeat is steady, uninterrupted, and perpetually resilient. View Details

Needle Valves Hex Body Series – Female x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Hex Body Needle Valves Female x Female are precision valves designed for accurate flow control and isolation in piping systems. The hexagonal body allows for easy installation and secure tightening using a standard wrench. Both ends have female threads, enabling direct connection to male-threaded pipes or fittings without additional adapters.

These valves are suitable for high-pressure and high-temperature applications, with a standard working pressure of 6000 psi and temperature ratings from -50°C to 230°C, extendable up to 500°C with graphite. They are commonly used in oil and gas, instrumentation, and process control systems to regulate fluid or gas flow, perform system bleed operations, or isolate sections of a pipeline.

The valves feature a metal-to-metal body and bonnet seal for durability, a self-centering non-rotating stem tip for consistent shutoff, and packing located below the threads to prevent process media from reaching the threads. Factory-tested for seat and packing leakage, these valves provide reliable, leak-free performance in demanding environments.

View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Tubing Retrievable SCSSSV 3-1/2 inch SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

2.5″ Butterfly Bleed Air Valve

The 2.5″ Butterfly Bleed Air Valve is a critical component in the LM2500 gas turbine, responsible for regulating the flow of bleed air—compressed air extracted from the turbine’s compressor stage. This valve helps control internal pressures and temperatures, which is essential to maintain safe and efficient turbine operation.

The valve has an effective flow area of 2.5 square inches, allowing it to manage airflow precisely in smaller turbine setups or space-restricted environments. Its butterfly-shaped disc is permanently attached to the shaft, which ensures consistent movement and reliable control of air flow with minimal play or slippage.

One important feature is its fast response time—less than 320 milliseconds to complete a full open or close stroke. This quick action enables the turbine control system to rapidly adjust pressure levels, preventing overheating and reducing mechanical stress on turbine components.

The valve’s bearing shaft is robustly designed to handle frequent small movements, known as dither cycles, without premature wear. The bearings themselves are specifically engineered to support these high-cycle conditions, improving the valve’s durability and lifespan.

By efficiently managing bleed air, this valve helps protect the turbine from excessive pressure build-up and thermal stress, which can otherwise lead to damage or reduced efficiency. Its design also allows installation without requiring changes to the turbine’s hydraulic or electrical systems, making it suitable for retrofits or upgrades on existing LM2500 turbines.

In summary, the 2.5″ Butterfly Bleed Air Valve plays a vital role in controlling compressor bleed air in LM2500 turbines, balancing safety, performance, and durability within compact or smaller turbine applications.

View Details

HT Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

Tubing Slip Stop

Enhance Well Operations with Precision: Discover HOCA Oil Tools' Slip Stop In the world of oil and gas, where the margin for error is minute and the demand for efficiency and safety is paramount, the right downhole tools can make all the difference. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools designed to meet and exceed industry challenges. Among our esteemed solutions is the Slip Stop, a critical component designed to bolster downhole operations' safety and effectiveness. HOCA's Slip Stop: The Cornerstone of Safe and Efficient Downhole Operations The Slip Stop by HOCA Oil Tools is engineered to provide unmatched reliability and control in various downhole environments. Crafted with precision from high-grade materials, this tool is designed to anchor securely within the wellbore, preventing the unwanted movement of downhole tools and equipment. It is an essential tool for ensuring the safety and success of numerous downhole activities, from well completion to intervention tasks. Experience the Unparalleled Quality of HOCA Oil Tools At HOCA Oil Tools, our commitment to excellence is reflected in every tool we provide, including the Slip Stop. We understand the complexities and challenges of downhole operations, which is why we are dedicated to delivering solutions that not only meet but exceed the expectations of the oil and gas industry. Incorporating the HOCA Slip Stop into your downhole operations is a step toward safer, more efficient, and more cost-effective well management. Our tools are designed with the end-user in mind, ensuring ease of use, reliability, and, most importantly, operational safety. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who rely on our Slip Stop to enhance their operational capabilities. Partner with us, and elevate your downhole operations with tools crafted for excellence and innovation. With HOCA Oil Tools, you're not just investing in a product; you're investing in peace of mind, operational integrity, and the future success of your downhole activities. View Details

Slickline Accelerator

Maximizing Downhole Dynamics with HOCA Oil Tools B.V.'s Slickline Accelerators In the intricate and demanding world of oil and gas extraction, the precision and effectiveness of downhole operations are paramount. HOCA Oil Tools B.V. is at the forefront of this industry, offering a comprehensive range of slickline accelerators designed to enhance the performance of various jars. Our accelerators are specifically engineered to maintain a constant pull on the jars, ensuring an intensified impact upon release, which is crucial for overcoming downhole challenges. Key Benefits of HOCA’s Slickline Accelerators: Enhanced Jar Performance: Our accelerators ensure a consistent and intensified jarring action, making them essential for effectively addressing downhole obstructions and ensuring operational success. Versatile Application: Compatible with various jars, our accelerators are suitable for a wide range of downhole conditions and operational needs, from routine maintenance to complex interventions. Optimized Impact Delivery: By maintaining a constant pull, our accelerators facilitate the optimal deployment of jars, ensuring that the necessary impact is delivered precisely where it is needed. Increased Efficiency: The improved jarring action provided by our accelerators can significantly reduce the time and effort required to address downhole issues, leading to faster, more efficient operations. Durability and Reliability: Constructed with high-quality materials and engineered to the highest standards, our accelerators are built to withstand the harsh downhole environment, ensuring reliability and longevity. Customization and Compatibility: Available in various sizes and with different connection types, our accelerators can be easily integrated into existing tool strings, providing a tailored solution to meet specific operational requirements. Innovative Features of HOCA’s Slickline Accelerators: Type ‘EO’ and ‘ED’ Accelerators: These models are designed for a range of sizes from 1 1/2” to 2 1/2”, making them adaptable for different operational scales and requirements. Threaded and QLS Connections: Offering flexibility for integration with different tool strings, these connection types ensure that our accelerators can be deployed swiftly and securely in various downhole environments. Optimized Length and Weight: With lengths ranging from 22.66” to 27.95” and weights from 7.0 lbs (3.18 kg) to 24.8 lbs (11.25 kg), our accelerators are engineered for balance and effective force transmission. Robust Construction: Our accelerators are constructed to endure the rigors of downhole operations, ensuring consistent performance and durability over time. At HOCA Oil Tools B.V., we understand the complexities and challenges of downhole operations. Our slickline accelerators are a testament to our commitment to quality, innovation, and customer satisfaction. By incorporating our accelerators into your tool string, you can enhance the efficiency and effectiveness of your downhole operations, ensuring that every intervention is optimized for success. Choose HOCA Oil Tools B.V. for your downhole needs, and experience the difference that quality and innovation can make in your operations View Details

Valve and Prong Type Equalizing Sub-Assembly

Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Wireless Communication Tower Construction

Soaring Above Communication Challenges: Nulux Network Solutions Pioneers in Wireless Tower Construction for the Oil and Gas Industry Exploration, extraction, and operational activities in the oil and gas industry are intrinsically bound to the formidable environments - remote locations, vast distances, and oftentimes, challenging terrains. Navigating through these physical barriers to establish a stable, secure, and scalable communication network necessitates innovative and robust solutions. This is where Nulux Network Solutions ascends, bridging the communication divide with unparalleled expertise in Wireless Communication Tower Construction. Pillars of Communication: Why Tower Construction Matters The landscape of the oil and gas sector demands the creation of a network that is not only extensive but also exceptionally reliable. Communication towers become the veritable backbone, linking disparate operations, ensuring data flow, and maintaining a coherence that is vital for smooth functionalities and decision-making processes. Constructing these towers, especially in the arduous terrains that characterize the oil and gas industry, requires a blend of engineering expertise, practical experience, and an acute understanding of wireless communication nuances. Nulux’s Distinction: A Synthesis of Experience and Innovation With an illustrious history in designing and implementing an array of wireless systems and infrastructures, Nulux has emerged as a leader in wireless tower construction and rigging, ensuring that the tapestry of communication across your operations, be it P2P or Multipoint networks, remains uninterrupted and secure. Adaptivity and Scalability: As your operations evolve, so does your communication network. Our towers are constructed with a forward-looking approach, ensuring they are capable of adapting to technological advancements and scalable to accommodate your expanding operational horizons. Reliability in Rigorous Environments: Our construction protocols and strategies are molded by our extensive experience in various terrains and environments, ensuring that the towers stand resilient in the face of geographical and meteorological challenges. A Mesh of Connectivity: Whether linking the executive decisions from central offices to the far-reaching extraction sites or facilitating data-driven operations across the entire network, our towers ensure that every node remains perpetually connected. Navigating Through P2P and Multipoint Networks Understanding and integrating varied network configurations such as P2P and Multipoint networks into our tower construction strategy, we ensure that the specific communicational and operational prerequisites of your business are met. End-to-End P2P Solutions: For secure, dedicated, and high-speed communication between two points, our P2P network solutions, enabled by strategically positioned towers, ensure that your data travels securely and swiftly. Expansive Multipoint Configurations: When the operational framework demands centralized communication with multiple nodes, our towers facilitate a sturdy and coherent multipoint communication network. Your Partner in Progress: Nulux Network Solutions As we stride into the future, where the fusion of technology and operations will become even more intrinsic, Nulux stands as your partner, ensuring that the wireless communication networks powering your operations are not just contemporaneous but also future-ready. Connect with us, and let’s architect a communication network that empowers, enhances, and ensures the seamless functionality of your operations in the oil and gas industry, traversing through the present and into the future. View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

LM2500 HPT Vertical Stand

The LM2500 High Pressure Turbine (HPT) Vertical Stand is a support fixture designed to hold the HPT module of the LM2500 gas turbine in a vertical position. It is mainly used during maintenance, inspection, or transport of the turbine module.

By keeping the turbine upright, the stand helps ensure that the module stays stable and properly aligned while work is being done. This setup also makes it easier for technicians to access certain areas of the HPT that would be harder to reach if the module were lying flat.

The stand is built to handle the weight of the HPT and includes features like mounting points or forklift slots for safe and easy movement within a workshop or maintenance area. It is commonly used in the oil and gas industry where LM2500 turbines are found in power generation or mechanical drive applications.

In short, the HPT Vertical Stand is a practical tool that helps keep the turbine secure, makes maintenance tasks safer, and supports good handling practices.

View Details

Storm Choke 2-1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Maui ROV, Heavy Inspection Class ROV

Designed for the Extraordinary - Meet Maui ROV Are you ready to take your subsea operations to new heights? Introducing Maui ROV, the ultimate subsea solution designed with large payloads in mind. With its cutting-edge vectored thruster layout, professional Aluminum frame, and remarkable payload capacity, the Maui ROV stands out as a true game-changer in the industry. Mastering the Depths The Maui ROV is built to conquer challenging dives with ease, making it the ideal choice for survey work or heavy lifting tasks. Its impressive capabilities stem from the ingenious combination of design elements that result in unparalleled performance. Powerful Features for Unmatched Performance 1. Industrial Flight Computer and Linux User Interface: The Maui ROV features an industrial flight computer and user-friendly Linux interface, ensuring seamless control and precise maneuverability. 2. Topside Integrated Console: Equipped with a 22-inch sunlight-readable monitor and a hand controller, the Topside Integrated Console eliminates the need for additional equipment, streamlining your operations. 3. 6-Axis Stability and Fully Stabilized Mode: The Maui's ROV flight computer supports 6-axis stability, providing unmatched control and stability during underwater missions. 4. Exceptional Payload Space: Utilizing smaller diameter thrusters stacked vertically, the Maui ROV boasts exceptional payload space, enabling it to carry various instruments such as the Coda Octopus 3D Sonar, INS, Multibeam Profilers, or Sub Bottom Profilers. Experience the Specifications of Excellence Take a closer look at the impressive specifications that make the Maui ROV an indispensable asset for your subsea ventures: • Depth Rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in Air: 31.2kg • Payload Capacity (Fresh Water): 9.3kg • Payload Area: 610mm x 457mm • Thrusters: 8 lateral (45deg), 6 vertical • Ballard Pull: 27kg lateral, 28kg vertical • Top Speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux Video: 2 HD camera inputs • Lights: 8x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux Power: 5/12/24/48VDC regulated Topside Integrated Console Specifications: • Output Voltage: 400VDC, 3kW • Input Voltage: 240VAC, 15A maximum • Monitor: 22in HD sunlight-readable • Case: Wheeled, 610x420x260mm, 24kg • Fully Isolated Output with LIM • Intel i5 PC with Windows 10 Installed • Aux HDMI Monitor Output Tether Specifications: • Breaking Strength: 250kg • Diameter: 9.1mm • Length: Up to 500m • Neutral in Fresh Water Explore the Depths with Maui ROV Unleash the power of heavy payloads and challenging dives with the Maui ROV. Let our state-of-the-art technology redefine your subsea operations and elevate your success. View Details

2 1/2" Tubing End Locator – 1.750" Max O.D. – 15/16-10 UN Pin × 1-11 1/2 NPT Box – For 2" to 2 1/2" Tubing

In oil and gas well operations, the 2 ½” Tubing End Locator plays a critical role in confirming the exact depth at which production tubing terminates within the wellbore. Accurately identifying the tubing endpoint is essential during various well intervention activities, including maintenance, workovers, and the installation or retrieval of downhole tools and equipment.

During operations such as setting packers, deploying plugs, running logging tools, or performing fishing jobs to recover stuck equipment, precise knowledge of tubing length ensures that tools are positioned correctly. This prevents accidental over-pumping or tool deployment beyond the tubing into the open hole section of the well, where damage to equipment or tool loss can occur.

The 2 ½” Tubing End Locator is designed specifically to fit tubing with an outer diameter of approximately 2 ½ inches. It features a compact maximum outside diameter of around 1.750 inches, allowing it to pass easily within the tubing without causing obstruction. The tool employs a spring-loaded finger mechanism that activates mechanically upon reaching the tubing bottom. This signal does not rely on electronic sensors or depth measurement devices, making the tool highly reliable even in harsh downhole environments where electronics may be compromised by pressure, temperature, or fluid conditions.

Standardized threaded connections on the tool—typically a 15/16 - 10 UN pin on the top and a 1 - 11 1/2 NPT box on the bottom—enable it to be seamlessly integrated into a wide range of intervention toolstrings. These common connection types ensure compatibility with existing downhole equipment and facilitate quick assembly and deployment.

Manufactured from high-strength alloy steel or similar materials, the tubing end locator is built to withstand typical downhole conditions, including high pressure, elevated temperatures, and corrosive fluids commonly found in oil and gas wells. Its purely mechanical design minimizes maintenance requirements and reduces the risk of failure compared to electronic alternatives.

This tool is particularly valuable in wells where tubing length may have changed due to wear, repairs, or previous interventions, offering an essential measure of control and confidence in complex well environments.

View Details

Tubing hanger with electrical feedthrough for ESP applications

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility. View Details

MS-251EC Extraction Condensing Steam Turbine

Unlock Unparalleled Efficiency with the Kessels MS-251 EC Extraction Condensing Steam Turbine: Where Precision Meets Power In the ever-evolving landscape of the oil and gas industry, precision, reliability, and sustainability reign supreme. Kessels Steam Turbines is proud to introduce the MS-251 EC Extraction Condensing Steam Turbine, a technological marvel that redefines excellence in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the backbone of industries demanding a constant pressure steam flow for diverse processes. The MS-251 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency Perfected What sets the MS-251 EC apart is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-251 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-251 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-251 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-251 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Slickline Rope Socket

HOCA Oil Tools B.V.'s Expertise in Slickline Rope Sockets In the dynamic world of oil and gas extraction, precision and reliability are paramount. At HOCA Oil Tools B.V., we take pride in our extensive expertise in slickline operations, particularly our specialized rope sockets designed for varied downhole conditions. Our product range includes Type ‘AO’, ‘AD’, ‘AS’, ‘BO’, ‘BD’, ‘BS’, ‘CO’, ‘CD’, ‘CS’,‘CGO’, ‘D’, ‘DD’, ‘DS’, ‘GO’, ‘RC’, ‘SA’, ‘HO’, and ‘HD’ rope sockets, each tailored for specific wireline tasks and environmental conditions. Our rope sockets are crafted from high-quality alloy materials, ensuring durability and optimal performance. They cater to a wide range of wire sizes and types, accommodating single-strand, multi-strand, and encapsulated lines. With features like spring disc supports, releasing slips, and heavy-duty clamps, our rope sockets ensure secure connections and safe operations under intense downhole pressures. The main features of some of the various rope sockets offered by HOCA Oil Tools B.V. are as follows: Type ‘CGO’ Rope Socket: Designed for use with small stranded lines up to 1/4” diameter, this rope socket has an additional swivel bottom, making it similar in design to the Type ‘CO’ but with enhanced functionality for specific applications requiring rotation. Type ‘D’ Dummy Rope Socket: Available with threaded or QLS Connections, this tool can be attached to other types of tools with a pin connection for various wireline applications, offering great versatility and adaptability in operational setups. Type ‘GO’ Rope Socket: Engineered specifically for single conductor cable heads, providing secure and reliable connections for specialized wireline operations. Type ‘RC’ Rope Socket: This assembly is tailored for encapsulated line applications, offering enhanced protection and durability for operations involving encapsulated cables. Type ‘SA’ Rope Socket: Designed for swabbing applications with Babbitt fill, this rope socket is tailored for operations requiring the retrieval of fluids from wells, ensuring efficient and reliable performance. Type ‘HO’ and ‘HD’ Heavy Duty Rope Socket: These are intended for heavy-duty wireline work and feature a unique design that traps the wire, held in place with socket screws, suitable for more demanding operations and environments. Each type of rope socket has unique features tailored to different wireline operations, ensuring that HOCA Oil Tools B.V. can provide a suitable solution for a wide range of downhole conditions and requirements. HOCA Oil Tools B.V. stands at the forefront of slickline technology, offering solutions that ensure safety, efficiency, and reliability. Our commitment to innovation and quality has established us as a trusted partner in the oil and gas industry worldwide. View Details

Newton Grabber ROV Manipulator

Unleash the Power of Precision: The Newton Grabber We're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need The priority is simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Quality As pioneers in subsea robotics, we consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration. View Details

Ambient Pressure SSSV 5-1/2

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

WR-SCSSSV 7 inch FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Hydraulic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

OilHungry oil absorbent big pad

Oil absorbent pads are designed to selectively absorb oil-based liquids while repelling water. They are commonly used in various industries, including automotive, marine, and manufacturing, to clean up and control oil spills or leaks. These pads are crucial for preventing environmental contamination and ensuring workplace safety. The size of oil absorbent pads can vary, and this specific product, Oil Absorbent big pad 22" x 23", is designed with dimensions of 22 inches by 23 inches. This size is suitable for addressing larger spills or leaks. It works very well and easy, when oil leaks occur, simply place the absorbent pad in the affected area to efficiently clean up and contain the spilled oil. And After use, follow proper disposal guidelines, on the packaging. The primary purpose of OilHungry Oil Absorbent pad is to effectively clean up oil spills. Whether it's a minor leak or a more substantial oil spill in an engine, the absorbent pad is designed to capture and contain the oil, preventing it from spreading further. Leaking oil can happen with every boat or vessel. And oil leaks pose a significant threat to the environment. The absorbent pad helps mitigate this threat by quickly and efficiently absorbing the leaked oil. This proactive approach protects water bodies, preventing the oil from contaminating rivers, lakes, or oceans. Having an Oil Absorbent big pad (22" x 23) is a valuable tool to address and solve challenges related to leaks in engines. the absorbent pad offers a targeted and effective solution for managing oil spills in various industrial and marine settings. Having the Oil Absorbent big pad prepared in your boat, is the same as having a plan for unexpected leaks. View Details

Wisdom Cap Lamp KL12MS

Discover Unmatched Illumination with Wisdom's KL12MS Corded Miner's Cap Lamp from Provix Introducing the Wisdom KL12MS Corded Miner's Cap Lamp, a cutting-edge lighting solution for the mining industry, proudly offered by Provix. This lamp is specifically designed to meet the challenging demands of underground mining, providing exceptional illumination, safety, and durability. Exceptional Lighting Performance The KL12MS is equipped with a robust 14,000mAh battery, guaranteeing up to 13 hours of continuous operation. It features a high-powered main light LED with a working voltage of 3.0V, current of 1080mA, and power of 3.24W. This results in a remarkable luminous flux of 512 lm and an extraordinary lighting degree of 28,000 lx, ensuring unparalleled visibility in the darkest environments. Durability and Longevity Built to last, the KL12MS boasts a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery life extends up to 1,200 cycles under typical working conditions, emphasizing reliability and longevity. Prioritizing Safety Your safety is our priority. The KL12MS is designed with explosion-proof features, conforming to ATEX GROUP II standards, and an IP68 waterproof rating. Its short circuit protection time of less than 320 μs further enhances its safety credentials, making it a trustworthy companion in any mining operation. Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz), the KL12MS is comfortable for extended use. Its main cable length ranges from 1.4 to 1.65 meters (4.59 to 5.41 feet), offering flexibility and freedom of movement. The compact battery box, measuring 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), ensures the lamp is not cumbersome during long shifts. Efficient Charging Capabilities The lamp's rechargeable via USB feature provides convenient and efficient charging. It takes only 5.5 to 10 hours to charge, minimizing downtime and maximizing productivity. Get in Touch for More Information Upgrade to the Wisdom KL12MS Corded Miner's Cap Lamp for enhanced visibility, safety, and efficiency in your mining operations. Visit Provix at our location, call us, or email sales@provix.net for more details. Explore our range of products at www.provix.net and experience the future of mining illumination with the Wisdom KL12MS. View Details

Gauge Root Valve – Male x Female – Lagging Extension – 1/4” NPT – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension in 1/4” NPT is a small but robust valve used to safely isolate pressure gauges in pressurized systems. It is designed to handle pressures up to 6000 PSI and temperatures from -50°C to 230°C, providing a reliable seal and leak-free operation. The lagging extension lets the valve be operated without removing insulation, protecting both the system and the operator.

The valve includes features to make it safe and easy to use: a back seat on the stem for extra security, a self-centering non-rotating tip for consistent shutoff, and an adjustable gland retainer to keep the packing tight. The removable T-handle allows smooth operation with minimal effort, while the dust cap prevents dirt or debris from entering the valve. All valves are factory tested for performance, include heat code traceability, and can be made from materials compliant with NACE MR 01-75 for corrosion resistance.

This valve is ideal for oil and gas systems where isolating gauges safely, maintaining insulation, and ensuring reliable operation are essential.

View Details

Well Servicing Pipe Wrenches for torquing tubulars and downhole tools

The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose! View Details

D6 Bulldozer

POWER TRAIN Fully-automatic 4-speed transmission Cat C9.3B diesel engine Double reduction planetary final drives Hydraulic reversing fan OPERATOR ENVIRONMENT Fully redesigned cab, sound suppressed, with Integrated Roll Over Protective Structure (ROPS) Full-color 10-inch (254 mm) liquid crystal touch screen display Integrated rearview camera Adjustable operator controls/armrests Cab mounted modular Heating/Ventilation/Air Conditioning (HVAC) system Added storage areas Electrohydraulic implement and steering controls Cloth seat Lights - 6 LED CAT TECHNOLOGY Slope Indicate Product Link, Cellular Grade Control Ready Cab Remote Control Ready Remote Flash/Remote Troubleshoot Operator ID Machine Security - Passcode Compatibility with radios and base stations from Trimble, Topcon, and Leica Capability to install 3D grade systems from Trimble, Topcon, and Leica UNDERCARRIAGE Redesigned track roller frame SERVICE AND MAINTENANCE Rear access ladder Shovel holder Ground level service center 30-minute cab removal Fire extinguisher mounting provision Ecology drains Underhood work light HYDRAULICS Independent steering and implement pumps Load sensing hydraulics ATTACHMENTS Ripper-ready rear hydraulics View Details

Bigbore 9-5/8 inch Surface Controlled Subsurface Safety Valve Wireline Retrievable

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

5" Mech-2 Double Grip Mechanical Set Packer for 15-18 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

3.25 inch WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Needle Valves Hex Body Series – Male x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Hex Body Series Male x Female are industrial valves designed for precise flow control in high-pressure systems. The hexagonal body allows for standard wrench access, facilitating installation and maintenance. Male and female NPT connections enable integration into various piping systems, commonly used in instrumentation, process control, and oil and gas applications.

These valves are manufactured according to ASME B16.34 standards and type-tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with options for higher pressures. The metal-to-metal body and bonnet seal provides reliable sealing under high pressure and temperature conditions. Materials can comply with NACE MR 01 75, and the valves operate over a temperature range of -50°C to 230°C, with graphite seals available up to 500°C.

Each valve undergoes factory testing for seat and packing leakage using nitrogen gas at 1000 PSI. The valves feature a back-seated stem, rolled threads, and a mirror-finished stem through the packing, ensuring consistent and smooth operation. The removable T-handle reduces torque requirements during operation, and a dust cap protects the stem threads. The hex body and male-female connections provide a standard interface for connection while maintaining secure and leak-resistant operation.

View Details

Stud Welder CAD 81

Introducing the Canaweld CAD 81 Capacitor Discharge Stud Welding System: Power and Precision Unleashed! When it comes to high-performance stud welding, the Canaweld CAD 81 stands in a league of its own. Harnessing the cutting-edge technology of Capacitor Discharge (CD) stud welding, this welding system offers unparalleled precision, speed, and efficiency, making it the ultimate choice for welders in the oil and gas industry. Precision in a Blink - Capacitor Discharge Stud Welding The Canaweld CAD 81 utilizes a direct-current arc from a capacitor, allowing for weld times as quick as 1 to 6 milliseconds. The result? Seamlessly welded studs with no burn-through on the opposite side, even with very thin metals. Perfect for smaller diameter studs, pins, non-standard materials, and when precision is paramount. Compact Yet Powerful - Unmatched Welding Capacity Don't be fooled by its compact design; the Canaweld CAD 81 boasts a full 5/16-inch (M8) welding capacity, making it the most compact and versatile system on the market. Its microprocessor control ensures precise and consistent welding performance, while the enhanced charging circuit with a high output transformer maximizes its duty cycle, offering you unmatched welding power in a lightweight package. Safety and Ease of Use - User-Friendly and Efficient The Canaweld CAD 81 is designed with your safety and convenience in mind. With enhanced user feedback, including safety and fault codes, you can weld with confidence and peace of mind. The system comes complete with everything you need, including the gun, two ground cables, collets, changing tools, and a convenient carrying case for easy transportation. Features That Make a Difference Let's take a look at some of the remarkable features of the Canaweld CAD 81: • Weld Range: Accommodates US Stud Size #4 – 5/16”, Metric Stud Size (M3-M8), Stud diameter 0.112″ – 0.312″ • Input Power 1~115/230, 50/60Hz (internally switchable) • 81,000uf Capacitance for rapid and powerful welds • Portable and Lightweight: Weighing only 25 lbs., take it anywhere the job demands • Ergonomic Design: Designed for comfort and ease of use during extended welding sessions • Heavy-Duty Cable Set: Ensures robust and reliable connections • Dual Ground Cable: For added safety and efficiency • Fully Adjustable Leg Set: Achieve the perfect welding angle for every job • Diagnostic LEDs: Easy troubleshooting and maintenance The Canaweld CAD 81 - Empowering Welders in the Oil and Gas Industry At Canaweld, we take pride in providing cutting-edge welding machines and accessories that meet the unique demands of the oil and gas industry. The CAD 81 exemplifies our commitment to excellence, innovation, and your welding success. Unleash the Power of Precision and Performance with the Canaweld CAD 81 Capacitor Discharge Stud Welding System. Empower your welding journey with Canaweld - Your Partner in Welding Excellence! View Details

HP-3 Hydraulic Set High Angle 6 5/8" 20-24 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Bearings of various types

Bearings are "parts that assist objects' rotation". They support the shaft that rotates inside the machinery. Machines that use bearings include automobiles, airplanes, electric generators and so on. View Details

Check Valve Poppet Type – Female x Female 1/4" NPT – 6000 PSI – ISO 9001

In oil and gas systems, controlling the direction of fluid flow is critical to protect pipelines, pumps, and equipment. The 1/4" poppet type check valve with female × female NPT connections provides reliable uni-directional flow, preventing backflow and maintaining system integrity. Its compact size makes it ideal for small diameter lines, instrumentation, sampling, and control applications, while the female × female connections allow secure inline installation without additional fittings.

The valve has a standard working pressure of 6000 PSI, with optional configurations rated up to 10000 PSI. Selectable cracking pressures from 1/3 to 25 PSI allow precise adaptation to system requirements. It is available in corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability guarantees quality and material verification, and additional testing, including vibration, temperature, and helium, is available for applications requiring maximum reliability.

View Details