Ballycatter.ca - Industrial Equipment

Needle Valves Integral Bonnet Series – Tube OD – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Integral Bonnet Tube OD needle valves feature a one-piece construction where the bonnet is integrated with the valve body, eliminating welded joints and providing enhanced strength and safety. This design ensures durability and reliable performance in high-pressure applications, minimizing the risk of leaks or failures.

The Tube OD connections allow secure attachment to tubing while providing precise flow control, making these valves ideal for instrumentation lines, pressure measurement, and process control systems. The design supports consistent, repeatable shut-off and smooth operation, even under demanding conditions.

These valves are particularly suitable for oil and gas applications where high-pressure resistance, leak-free performance, and ease of maintenance are critical. Additional features such as rolled stem threads and mirror-finished stems reduce wear, lower operating torque, and extend service life, ensuring dependable operation in both standard and critical environments.

View Details

Wisdom Lamp KL5MS

Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations. View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

LM2500 Wrench for HPT Coupling Nut

The LM2500 Wrench – Horizontal/Vertical HPT Coupling Nut is a specialized maintenance tool designed for the LM2500 gas turbine engine. This wrench is used to install and remove the High Pressure Turbine (HPT) coupling nut, a critical component that secures the HPT rotor to the turbine shaft.

Removing and installing the coupling nut is necessary during major maintenance activities like rotor inspections, repairs, or when replacing key turbine components. Proper removal allows technicians to safely separate the rotor from the shaft, while correct installation ensures the rotor is securely fastened for reliable engine operation.

What makes this wrench stand out is its ability to work with both horizontal and vertical engine positions. This means technicians can use it easily no matter how the engine is set up, making maintenance simpler and more flexible.

Built to precise standards and made from tough materials, the wrench ensures the right amount of force is applied when tightening or loosening the coupling nut. This careful control helps protect the engine’s important parts from damage.

By using this wrench, maintenance teams can complete their work faster and with confidence, reducing downtime and keeping the turbine reliable. It’s an essential tool that supports the smooth operation of the LM2500 engine.

View Details

Bilge Absorbent Boom

OH-BGE Bilge Absorbent Boom is engineered to address the specific challenges of oil accumulation in the bilge, arising from engine leaks and oil changes. With its unique design and technical specifications, this product is your ally in safeguarding the environment. Technical Specifications: Part Number: OH-BGE Product Type: Absorbent Bilge Fluids Absorbed: Oil-Based Liquids Volume Absorbed per Unit: 1.59 gallons Color/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Neutralizing: No Floating: Yes UV Resistant: No Size: 10” x 44” Filler Material: Polypropylene Filler Flame Resistant: No Incinerable: Yes Applications: • Marine vessels • Boats • Oil-powered machinery In the maritime tapestry where vessels traverse vast waters, a silent guardian emerges—the OH-BGE Bilge Absorbent Boom. Beyond its utilitarian role, this product narrates a story of efficiency, environmental consciousness, and unwavering commitment to technical excellence. Can is known for its testament to precision in oil cleanup. Meticulously crafted, it targets oil floating in the bilge, whether a result of engine leaks or the aftermath of oil changes. A Polypropylene Filler ensures optimal absorption, leaving the bilge spotless and safeguarding marine environments from potential contamination. Very handy to learn that the OH-BGE, equipped with an integrated loop of rope, effortlessly finds its place in the bilge. This seamless application isn't merely convenient; it's a strategic move to efficiently absorb oil before water circulates back to the ocean, lake, or river. Choosing the OH-BGE isn't merely a cleanup decision; it's a commitment to safeguarding our waters. This absorbent boom becomes a catalyst for environmental protection, actively contributing to the preservation of aquatic ecosystems. With every use, it signifies a pledge to a cleaner and more sustainable maritime future. the OH-BGE becomes an investment in environmental stewardship. It transcends being a product and emerges as a strategic choice for compliance with rigorous environmental regulations. This proactive step shields against potential fines tied to oil pollution, aligning fiscal prudence with ecological responsibility. OH-BGE orchestrates a symphony of technical prowess. Tailor-made with a specific size of 10” x 44” and an impressive volume absorption of 1.59 gallons per unit, it becomes an exemplar of efficient and targeted oil cleanup in the bilge. This isn't just a boom; it's a harmonious blend of technical excellence and environmental responsibility. Choose OH-BGE – where every ripple narrates a tale of environmental stewardship. View Details

T type Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

Nitrogen Generator System

Introducing Sivam's Nitrogen Generator: The Ultimate Solution for Nitrogen Generation on the Go! This state-of-the-art unit utilizes PSA Column technology to generate gas phase nitrogen of specified quality levels at any field location. It's the perfect solution for industries that require a reliable source of nitrogen in remote locations, without the hassle of transporting and storing nitrogen cylinders. Sivam's Nitrogen Generator is designed with portability and convenience in mind. With its compact size and easy-to-use interface, it can be set up quickly and easily on any job site. Whether you're in the oil and gas industry, electronics manufacturing, food packaging, or any other industry that requires high-purity nitrogen, Sivam's Nitrogen Generator is the ideal choice. One of the key benefits of Sivam's Nitrogen Generator is its advanced PSA Column technology. This technology enables the unit to separate nitrogen from the air using a carbon molecular sieve, providing a reliable source of nitrogen gas at a specified purity level. This means you can be confident in the quality of the nitrogen you're generating, no matter where you are. In addition, Sivam's Nitrogen Generator is designed for efficiency and cost-effectiveness. With its low power consumption and minimal maintenance requirements, it's a cost-effective alternative to traditional nitrogen sources. And because it's a self-contained unit, there's no need to worry about transporting and storing nitrogen cylinders, saving you time and money. Overall, Sivam's Nitrogen Generator is the ultimate solution for nitrogen generation on the go. With its advanced technology, ease of use, and cost-effectiveness, it's the perfect choice for industries that require a reliable source of nitrogen gas, no matter where they are. Contact us today to learn more about Sivam's Nitrogen Generator and how it can benefit your business. View Details

HP-3 Hydraulic Set High Angle 6 5/8" 28-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Wireline Retrievable Surface Controlled Subsurface Safety Valve 5-1/2 inch Bigbore

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

MAGIC WELD 200 light-weight 200-Amp DC Stick welder

Introducing the MAGIC WELD 200: Unleash the Power of Welding and Portability! At Canaweld, we understand the demands of welders on-site and in the field. That's why we're thrilled to present the MAGIC WELD 200 - the ultimate fusion of welding capabilities and generator portability, designed to elevate your welding experience to new heights. Powerful Performance in a Lightweight Package The MAGIC WELD 200 is a true powerhouse in its class, offering an impressive 200-Amp DC Stick welder in a lightweight design. Built for everyday use, this versatile welder doubles as a portable generator, providing the power and efficiency you need in any welding or electrical project. Engineered for Precision and Power Paired with the exceptional Honda GX 270 four-stroke engine, the MAGIC WELD 200 delivers a powerful and steady arc for flawless welding performance. Its auto idle feature maximizes fuel efficiency and extends the engine's lifespan, ensuring you can tackle even the most demanding tasks with ease. The Perfect Companion On-Site or Around the Farm Weighing just 135 lbs. (61 Kg) and boasting a remarkable 200A in 60% duty cycle, the MAGIC WELD 200 is your go-to companion on-site or around the farm. Its sturdy construction and full steel frame offer optimal machine protection, while the optional extra trolley and wheels add even more convenience to your welding journey. Safety and Innovation at the Core Safety is our top priority, and that's why the MAGIC WELD 200 is equipped with the "Power Optimizer" function - a special feature patented by MOSA. This innovative technology prevents engine overload when nearing its power limit, keeping you and your equipment safe. Certified Excellence Rest assured, the MAGIC WELD 200 is CE certified, meeting the highest standards of quality and safety. Its engine complies with U.S. EPA and California EXH/EVP SORE Regulations, making it an eco-friendly and compliant choice. Unleash the Magic of Welding and Portability With the MAGIC WELD 200, you can now experience the perfect harmony of welding capabilities and generator portability. Empower yourself to take on any welding or electrical challenge with precision and power. Canaweld - Your Partner in Welding Excellence At Canaweld, we take immense pride in providing welding machines and accessories that cater to the unique needs of welders in the oil and gas industry. The MAGIC WELD 200 embodies our commitment to excellence and innovation, and we are thrilled to offer you this game-changing welding solution. Unlock the magic of welding prowess and unparalleled portability with the MAGIC WELD 200. Your welding success awaits! Canaweld - Empowering Your Welding Journey! View Details

Circulating Type Chokes for Nipples

HOCA Oil Tools: Mastering Flow Control with Circulating Type Chokes for Nipples In the specialized field of downhole operations, mastering the control of fluid flow within the wellbore is critical for operational success and efficiency. HOCA Oil Tools is at the forefront of this challenge, offering advanced solutions with our Circulating Type Chokes for Nipples. Designed to integrate seamlessly with landing nipples in the wellbore, these tools are essential for precise flow control and well management during various downhole activities. HOCA’s Circulating Type Chokes for Nipples: Precision Engineered for Optimal Flow Control Our Circulating Type Chokes for Nipples are designed for operators seeking to maintain precise control over fluid flow in their downhole operations. Whether for circulation, testing, or intervention tasks, our chokes provide the versatility and reliability needed in today’s diverse well environments. Constructed with the highest quality materials and engineered to withstand harsh downhole conditions, HOCA’s chokes ensure optimal performance and durability. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Circulating Type Chokes for Nipples means opting for a solution that embodies innovation, quality, and operational excellence. Our commitment to providing cutting-edge downhole solutions ensures that our products meet the complex demands of modern oil and gas operations, delivering performance that exceeds expectations. Incorporating our Circulating Type Chokes into your downhole toolkit signifies a step toward enhanced operational control, efficiency, and safety. With HOCA Oil Tools, you gain not just a supplier but a dedicated partner committed to supporting your downhole challenges with advanced solutions and expert service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Chokes for Nipples. Partner with us, and elevate your downhole flow control to new levels of precision and reliability. With HOCA Oil Tools, enhance your downhole operations with tools that redefine efficiency, safety, and performance in the demanding oil and gas industry. View Details

Half Moon Sheave

Half moon sheaves are designed to be used in conjunction with Sivam spooling units. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Check Valve Poppet Type – Female x Female 1/4" NPT – 6000 PSI – ISO 9001

In oil and gas systems, controlling the direction of fluid flow is critical to protect pipelines, pumps, and equipment. The 1/4" poppet type check valve with female × female NPT connections provides reliable uni-directional flow, preventing backflow and maintaining system integrity. Its compact size makes it ideal for small diameter lines, instrumentation, sampling, and control applications, while the female × female connections allow secure inline installation without additional fittings.

The valve has a standard working pressure of 6000 PSI, with optional configurations rated up to 10000 PSI. Selectable cracking pressures from 1/3 to 25 PSI allow precise adaptation to system requirements. It is available in corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability guarantees quality and material verification, and additional testing, including vibration, temperature, and helium, is available for applications requiring maximum reliability.

View Details

Tubing hanger with electrical feedthrough for ESP applications

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility. View Details

Gauge Root Valve – Bleed Valve with Vent Tube and Handle – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Bleed Valve with vent tube and handle is a high-pressure valve designed to provide safe venting and pressure release in industrial and oil and gas systems. It is typically installed in high-pressure piping where pressure gauges or instruments are connected, allowing operators to isolate and safely bleed off pressure for maintenance, calibration, or inspection. The vent tube directs released media away from the operator, reducing the risk of injury or contamination, while the handle provides easy and precise manual operation.

This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request, and is constructed with a metal-to-metal body and bonnet seal for reliable sealing at high temperatures and pressures. It features a backseat stem for added security, a self-centering, non-rotating tip to ensure leak-free performance, and a simple adjustable gland retainer to maintain packing stability over time.

Factory testing includes pneumatic tests with nitrogen at 1000 PSI to verify seat and packing integrity, with a maximum allowable leak rate of 0.1 sec/min. The valve materials can be supplied in stainless steel or other corrosion-resistant alloys and are compatible with NACE MR 01-75 standards. Heat code traceability ensures quality control and material verification for critical applications.

This valve is essential for safely isolating and venting pressure from instruments, gauges, or process line.

View Details

CSA 60 unit, Locking FAST charger rack

Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment. View Details

5" HP-6 Hydraulic Set High Angle Production Packer for 11.5-15 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

LM2500+G4 DLE U PT Gas Turbine

The LM2500+G4 DLE U PT is a versatile gas turbine designed for a wide range of applications, including onshore and offshore power generation, gas pipeline compression, and LNG compression. It features Dry Low Emissions (DLE) technology, which reduces nitrogen oxide (NOx) emissions to as low as 25 parts per million by volume (ppmv) at 15% oxygen, meeting stringent environmental standards.

In the oil and gas industry, production rates are closely linked to available horsepower. The LM2500+G4 DLE U PT offers higher power output, high reliability, and a lower initial cost per kilowatt, making it a cost-effective solution for energy-intensive operations.

This turbine has proven its capability to operate reliably in extreme ambient conditions, with running data demonstrating performance at temperatures as low as -50°F and start-up capability down to -40°F. This wide operational temperature range ensures dependable service in harsh environments.

Fuel flexibility is a key strength of the LM2500+G4 DLE U PT. It can seamlessly switch between various fuels—lean treated natural gas, rich offshore gas, propane, or diesel—without shutting down or losing efficiency. This flexibility supports energy security, allowing continuous operation even if the natural gas supply is interrupted. Additionally, the turbine can be adapted to burn alternative fuels like bioethanol and naphtha, further enhancing fuel options.

A notable advantage of aeroderivative gas turbines like the LM2500+G4 DLE U PT is their ability to operate on hydrogen blends, which produce no carbon emissions when combusted. Both new turbines and existing units can be converted for high hydrogen fuel use, supporting decarbonization goals.

Moreover, the LM2500+G4 DLE U PT is truly dual-fuel capable, able to switch from 100% natural gas to 100% propane without the need for pilot fuels. This contrasts with dual-fuel reciprocating engines, which typically require about 5% diesel during gas operation, increasing costs and emissions. The LM2500+G4 DLE U PT’s fuel flexibility, emission controls, and robust design make it a reliable and efficient choice for demanding mechanical drive and power generation needs in the oil and gas sector.

View Details

ROV Console and Monitor Racks

Custom ROV Console and Monitor Racks: Unleashing the Power of Personalization in Subsea Operations We understand that no two subsea missions are alike. Each expedition presents unique challenges and requires specific tools to achieve success. That's why we are proud to introduce our state-of-the-art Custom ROV Console and Monitor Racks, designed to cater to your specific ROV missions like never before. Your Mission, Your Configuration Gone are the days of adapting generic consoles to your unique needs. With the Custom ROV Console and Monitor Racks, you have the power to create a setup tailored precisely to your mission requirements. Our team of experts collaborates closely with you to understand the intricacies of your underwater objectives. Whether you need additional video inputs, specialized controls, or specific telemetry interfaces, we've got you covered. Unmatched Flexibility and Versatility Designed for seamless integration, our Custom ROV Consoles and Monitor Racks offer unparalleled flexibility and versatility. Whether you're exploring the depths of the ocean, conducting pipeline inspections, or conducting scientific research, our customized solutions ensure your ROV is equipped to handle any challenge. Enhanced Efficiency and Productivity Efficiency is the cornerstone of successful subsea operations. With a bespoke ROV console, you can optimize your workflow, reducing operational downtime, and maximizing productivity. Customized monitor racks allow you to monitor crucial data and video feeds effortlessly, providing you with real-time insights for quick decision-making. Uncompromising Quality and Reliability When it comes to subsea missions, there's no room for compromises. Our custom ROV consoles and monitor racks are crafted with the highest quality materials and cutting-edge manufacturing techniques, ensuring longevity and reliability in every venture. The Advantage • Expert Consultation: Our team of skilled professionals works with you to understand your unique mission requirements, ensuring a tailored solution that aligns perfectly with your goals. • Innovative Design: With a focus on innovation, our custom ROV consoles are equipped with the latest technology, empowering you with the tools you need for successful subsea exploration. • Rigorous Testing: Before delivery, every custom ROV console and monitor rack undergoes rigorous testing and quality checks, guaranteeing flawless performance in the field. • Exceptional Support: we are committed to providing unparalleled customer support throughout your journey. Our team is always ready to assist you with any questions or technical support you may need. Unlock the Full Potential of Your ROV Missions Don't settle for off-the-shelf solutions that don't meet your exact requirements. With the Custom ROV Console and Monitor Racks, you have the power to shape your subsea destiny. Let us help you design the perfect setup to conquer the depths and revolutionize your ROV missions. Contact us today to explore the limitless possibilities of personalized subsea exploration! View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 24-29.7 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

LM2500+G4 SAC 50Hz CC 2x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 2x1 is a high-performance gas turbine system designed for large-scale, high-efficiency power generation, particularly suited to the needs of oil and gas operations. This configuration links two LM2500+G4 gas turbines with a single steam turbine in a combined cycle layout—capturing waste heat from the gas turbines to produce steam and generate additional power. This approach significantly improves overall thermal efficiency while maintaining operational flexibility.

The Single Annular Combustor (SAC) with optional water injection helps the system meet emissions rules while keeping combustion stable and efficient. The LM2500+G4 improves on the previous +G4 model by increasing airflow, using better materials, and adding improved cooling. This allows it to produce about 10% more power without reducing the lifespan of critical hot parts. It can be equipped with either a two-stage or six-stage power turbine to fit different needs. Even with the higher power output, the +G4 keeps its modular, two-spool design, which makes maintenance easier and ensures reliable performance in many environments.

In the 2x1 configuration, the system delivers approximately 41% more power than a single gas turbine unit. The use of combined cycle technology ensures better fuel utilization, helping to reduce overall emissions and lower lifecycle operating costs.

The LM2500+G4 SAC 50Hz Combined Cycle 2x1 offers higher power, improved efficiency, and a flexible design, making it well-suited for large-scale oil and gas operations that demand reliable and efficient power generation. Its “50Hz” designation means the turbine is specifically optimized to supply electricity to grids operating at 50 cycles per second, ensuring seamless integration with regional power systems.

View Details

HDI 2000P Pressure Gauge System

The HDI 2000P Pressure Gauge System is a solid-state electronic gauge designed to provide accurate and reliable pressure measurement in demanding industrial and oilfield environments. It is suitable for monitoring pressures up to 20,000 psi and is built to operate safely in hazardous locations.

The system includes a gauge display, inline cable, and a matched pressure sensor. The gauge features a 6-inch diameter LCD with a numeric display and a 101-segment analog bar graph for trend indication. The display is visible from up to 35 feet and is designed for use in varying lighting conditions.

Powered by a field-replaceable 3.6 V battery pack, the system supports continuous operation with minimal power consumption. Battery life is typically around 18 months, with a one-year guarantee. Calibration data is retained when powered off.

The pressure sensor uses a 3.5K strain gauge and is available in multiple pressure ranges. Sensors can be interchanged within specified ranges to reduce spare parts inventory. Connection types include 1” NPT, 2” line thread, ANSI or API flanges, 9/16” Autoclave, and 2” WECO.

Optional outputs include 4-20 mA and 0-1 Vdc signals for integration with chart recorders, PLCs, and remote displays. A remote display (slave gauge) option allows duplication of the pressure reading at another location.

The gauge and sensor are factory calibrated as a matched pair to ±0.50% full-scale accuracy. Calibration and configuration settings are stored in non-volatile memory and can be updated or reset by the user.

The 2000P Pressure Gauge System provides reliable pressure measurement with low maintenance requirements for industrial and oilfield applications.

View Details

Injection Valve 4 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Hydrostatic Bailer

Maximize Efficiency in Wellbore Clean-up with HOCA Oil Tools' Hydrostatic Bailers In the demanding world of oil and gas extraction, every operation demands precision, efficiency, and reliability. HOCA Oil Tools stands at the forefront of downhole solutions, offering innovative tools that redefine downhole operations. Among our acclaimed products is the Hydrostatic Bailer – a vital tool designed for effective wellbore clean-up and debris removal, ensuring operational integrity and minimizing downtime. Understanding the Hydrostatic Bailer The Hydrostatic Bailer, an essential component of our slick line tools range, is engineered to facilitate seamless debris removal from wellbores. Crafted with precision and made from high-grade materials, this tool is instrumental in maintaining clear, unobstructed wellbores, which is crucial for optimal production and operational safety. Employing the principles of hydrostatic pressure, the HOCA Hydrostatic Bailer removes sand, silt, and other obstructions with ease. Designed for versatility, it can be adapted to various well conditions and debris types, making it an indispensable tool for well operators and service companies alike. Elevate Your Wellbore Clean-up with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities of downhole operations. Our commitment to innovation, quality, and customer satisfaction drives us to develop tools like the Hydrostatic Bailer, designed to address the real-world challenges faced by the oil and gas industry. Integrating HOCA’s Hydrostatic Bailers into your downhole operations not only optimizes well performance but also aligns with cost-effective and safe operational practices. As the industry evolves, rely on HOCA Oil Tools to provide the solutions that keep your operations running smoothly and efficiently. Experience the difference with HOCA’s Hydrostatic Bailers – your partner in achieving clear, productive, and safe wellbores. Trust HOCA Oil Tools for unparalleled downhole solutions that drive your operations forward. View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

5" Mech-1 Single Grip Mechanical Set Packer for 15-16 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

5 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

6 5/8" Mech-2 Double Grip Mechanical Set Packer

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Silicone Protective Case

Maximize Protection for Your Lighting Equipment with the Wisdom Silicone Protective Case from Provix Provix is excited to introduce the Wisdom Multi-color Silicone Protective Case (model NWI-ZCZ159), a durable and stylish accessory designed for Wisdom Cordless Lights. Available in a vibrant yellow, as well as other colors including black, green, orange, red, and white, this protective case is a perfect blend of functionality and aesthetics. Durable Silicone for Ultimate Protection Crafted from high-quality silicone, the Wisdom Protective Case offers superior protection for your cordless lights. The silicone material is robust and resilient, safeguarding your equipment against impacts, scratches, and daily wear and tear. This ensures your lighting equipment remains in top condition, ready for the demanding environments of mining and construction work. Vibrant Color Selection for Personalization Choose from a variety of colors to personalize your mining equipment. Whether you prefer the visibility of the bright yellow case or a more subdued tone like black or white, there's a color to match your style and preference. The colorful options also make it easier to identify your equipment among others, adding a layer of convenience to your workday. Designed for Wisdom Cordless Lights The Silicone Protective Case is specifically designed to fit Wisdom Cordless Lights, ensuring a snug and secure fit. This compatibility guarantees that the case provides optimal protection while maintaining the functionality and accessibility of your lights. Lightweight and Easy to Use Despite its sturdy construction, the protective case is lightweight and easy to install. Simply slip your Wisdom Cordless Light into the case for instant protection. The silicone material is flexible, allowing for easy application and removal, and does not add bulk to your equipment. Ideal for Mining and Construction Professionals Whether you're a miner, construction worker, or anyone who relies on portable lighting, the Wisdom Silicone Protective Case is an essential accessory. It not only protects your equipment but also adds a personal touch to your professional gear. Get Your Wisdom Silicone Protective Case Today Elevate the durability and style of your lighting equipment with the Wisdom Silicone Protective Case, available now at Provix. Visit our website at www.provix.net to choose from the array of colors and learn more about our range of high-quality mining equipment and accessories. View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

WI Valve for injection wells (3.39 inch)

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Offshore Baskets

Attention all logistics managers and shipping professionals - if you're looking for a reliable and versatile solution for transporting and storing goods with unusual heights and dimensions, look no further than Sivam's Offshore Cargo Baskets! Our cargo baskets are designed to be flexible and adaptable, with lashing points that allow you to add tarps for added protection or simply use them as open tops. Thanks to their unique shape, these baskets can carry an unusually large weight for their size, making them the perfect choice for maximizing floor space and optimizing ease of use. At Sivam, we take safety and quality seriously, which is why our offshore baskets are DNV certified. You can trust that your goods will be safely stored and transported when you choose Sivam's Offshore Cargo Baskets. Our base in Italy means that we can serve clients all over the world, offering reliable and efficient shipping solutions no matter where you're located. We understand the importance of timely and dependable shipping, which is why we're committed to providing our customers with the best possible service. Don't settle for less when it comes to transporting and storing your valuable goods. Choose Sivam's Offshore Cargo Baskets and experience the difference in quality and convenience today! View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 29.3-36 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

CXS Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

MC Injection Valve 1-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Subsurface Safety Valve for Injection Wells 5.4 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

4” Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4-inch Surface-Controlled Subsurface Safety Valve (SCSSV) is designed for installation in wells with 4-inch production tubing and serves as a critical safety device to shut in the well during uncontrolled flow events caused by equipment failure or loss of surface hydraulic control pressure. The valve operates via a hydraulically actuated flapper mechanism that remains open under normal operating pressure but closes automatically if the hydraulic signal is lost. This fail-safe design isolates the wellbore, preventing unintended release of hydrocarbons and protecting both personnel and the environment.

The flapper mechanism is simple and robust, minimizing moving parts in the flow path and reducing potential points of failure. When open, the sealing surfaces are positioned out of the fluid flow path, which helps maintain smooth production flow and reduces wear on sealing components. The valve’s hydraulic actuation allows reliable operation under varying pressure and flow conditions commonly encountered in oil and gas wells.

The valve is wireline retrievable, which means it can be removed, serviced, or replaced using wireline tools without the need to pull the entire tubing string from the well. This capability significantly reduces well intervention time and associated costs while allowing maintenance or upgrades to be performed efficiently.

This SCSSV fits standard landing nipples with a seal bore of 3.313 inches and is rated for working pressures up to 5,000 psi. Its internal valve diameter is 1.75 inches, providing an appropriate balance between flow capacity and structural integrity for wells with moderate to high flow rates. The 4-inch tubing size is common in many oil and gas production wells, making this valve size versatile across different field conditions.

This size is commonly applied in production wells where 4-inch tubing is standard, supporting reliable well control and efficient maintenance. Its hydraulic surface control and simple flapper design contribute to dependable operation under varying well conditions.

View Details

MS-52 EC Extraction Condensing Steam Turbine

Revolutionize Your Power and Steam Needs with the Kessels MS-52 EC Extraction Condensing Steam Turbine: Efficiency Redefined In the dynamic world of the oil and gas industry, where precision, reliability, and efficiency are paramount, Kessels Steam Turbines presents the MS-52 EC Extraction Condensing Steam Turbine. This technological marvel is designed to surpass your expectations, setting new standards in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the lifeblood of industries that demand a constant pressure steam flow for diverse processes. The MS-52 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency at Its Zenith What sets the MS-52 EC apart is its unique ability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-52 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. The Ultimate in Versatility At Kessels, we understand that each industry has its unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-52 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-52 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Landing Nipple

Optimize Your Oilfield Operations with HOCA Oil Tools' Premium Landing Nipples In the demanding world of oilfield exploration and production, precision and reliability in downhole tools are paramount for operational success. HOCA Oil Tools leads the industry with its innovative lineup of Landing Nipples, designed to ensure seamless integration and operation within the wellbore. Tailored for various applications and environments, our Landing Nipples are key components in facilitating efficient downhole operations, setting new standards for performance and safety. HOCA's Landing Nipples: Engineered for Excellence in Downhole Operations Our Landing Nipples, available in a variety of types including 'BF', 'BR', 'ROTX', 'ROTXN', 'ROTR', and 'ROTRN', are designed to cater to diverse operational needs, from standard to heavy-duty applications. Each model is engineered with the highest quality materials to provide a secure and reliable seating point for wireline flow control devices, optimizing well performance and enhancing downhole safety. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and challenges of downhole operations. Our Landing Nipples are a testament to our commitment to providing innovative solutions that enhance efficiency, safety, and reliability. By choosing our products, you are not just selecting tools; you are partnering with a leader in downhole technology dedicated to your operational success. Integrating HOCA’s Landing Nipples into your downhole operations signifies a step towards enhanced operational performance, safety, and cost-efficiency. With a focus on innovation, quality, and customer service, HOCA Oil Tools is your partner for advanced downhole solutions. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your oilfield operations. Partner with us to experience the unparalleled performance, reliability, and support that come with our premium Landing Nipples. Elevate your downhole operations with HOCA Oil Tools – where technology, innovation, and expertise converge to drive success in the oil and gas industry. View Details

Electric Submersible Pump ESP Packer – 7" – 3,500 PSI

The 7" ESP Packer is a single-mandrel, dual-bore, hydraulic-set production packer set in place using hydraulic pressure applied through the tubing. The dual-bore configuration includes a pass-through section that allows the electric cable to reach the ESP pump below the packer while maintaining isolation between the tubing and the annulus, enabling reliable deployment and operation of the ESP system for artificial lift in oil and gas wells.

The packer has bi-directional, case-carburized barrel slips that anchor it securely against well pressures from both above and below, preventing movement during operation. It can be retrieved with a straight upward pull on the tubing string and is available in both straight-pull and cut-to-release configurations to suit different well conditions.

The packer has a nominal size of 7" and fits 7" casing weighing 26–32 PPF or 7-5/8" casing weighing 55.3 PPF. The outer diameter is 5.970", and the main bore inner diameter is 2.992". The assembly allows up to five feed-through lines for electric cables or injection lines, and the total length is 125".

The body is made from L80 material with HNBR elastomer seals, rated for pressures up to 3,500 PSI and temperatures from 70°F to 300°F. Connections include a 3-1/2", 9.2 PPF VAM TOP box at the top and a 3-1/2", 9.2 PPF VAM TOP pin at the bottom. The release weight is 68,800 lbs. The packer meets API Validation Grade V3 and Quality Level QL1 standards, providing reliable performance under standard service conditions.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

3 1/16" Coiled Tubing Hanger 10M Pressure Rated

Coiled tubing is a continuous, flexible steel pipe widely used in well intervention and maintenance operations, allowing operators to clean, stimulate, log, or deploy tools inside the wellbore without shutting down production. This capability makes coiled tubing an efficient and cost-effective solution to maintain well health and improve productivity.

The 3 1/16” 10M Coiled Tubing Hanger is designed to support larger diameter coiled tubing and heavier tool strings required for more demanding or deeper well operations. The size “3 1/16”” refers to the wellhead bore size that the hanger fits into, while the “10M” indicates its pressure rating of 10,000 psi, meaning it is built to withstand high-pressure environments typically found in advanced well interventions.

This hanger is rated to maintain pressure containment during interventions in high-pressure wells, ensuring safe operations and protecting well integrity. It accommodates coiled tubing sizes ranging from 1 inch up to 1¾ inches outer diameter, which allows the deployment of heavier and more complex downhole tools needed for challenging well conditions. Its rugged construction is engineered to withstand mechanical stresses from heavy tool strings and high pressures without compromising performance.

Designed with flanged connections compatible with API 6B and 6BX standards, the hanger integrates seamlessly with existing wellhead equipment, simplifying installation and maintenance. An important feature of this model is the wireline entry sub, which guides wireline tools into the tubing bore, facilitating additional intervention tasks. The wireline entry sub also provides a secondary annulus seal that prevents fluid or gas leaks and restricts any upward movement of the tubing, enhancing operational safety.

The hanger maintains a secure secondary annulus seal around the tubing, which is critical for isolating pressure zones and protecting against leaks during live well operations. This versatility makes the hanger suitable for various well intervention activities such as well cleanouts, acidizing, logging, and tool deployment, particularly in situations where larger tubing and higher pressures are involved.

The 3 1/16” size strikes a balance between tubing size and wellhead bore capacity. It is larger than smaller hanger sizes, allowing operators to use coiled tubing capable of handling more demanding operational requirements. Its high-pressure rating ensures safe operation in wells where pressures can reach or exceed 10,000 psi, common in deeper or complex reservoirs.

View Details

2 1/2" Tubing End Locator – 1.750" Max O.D. – 15/16-10 UN Pin × 1-11 1/2 NPT Box – For 2" to 2 1/2" Tubing

In oil and gas well operations, the 2 ½” Tubing End Locator plays a critical role in confirming the exact depth at which production tubing terminates within the wellbore. Accurately identifying the tubing endpoint is essential during various well intervention activities, including maintenance, workovers, and the installation or retrieval of downhole tools and equipment.

During operations such as setting packers, deploying plugs, running logging tools, or performing fishing jobs to recover stuck equipment, precise knowledge of tubing length ensures that tools are positioned correctly. This prevents accidental over-pumping or tool deployment beyond the tubing into the open hole section of the well, where damage to equipment or tool loss can occur.

The 2 ½” Tubing End Locator is designed specifically to fit tubing with an outer diameter of approximately 2 ½ inches. It features a compact maximum outside diameter of around 1.750 inches, allowing it to pass easily within the tubing without causing obstruction. The tool employs a spring-loaded finger mechanism that activates mechanically upon reaching the tubing bottom. This signal does not rely on electronic sensors or depth measurement devices, making the tool highly reliable even in harsh downhole environments where electronics may be compromised by pressure, temperature, or fluid conditions.

Standardized threaded connections on the tool—typically a 15/16 - 10 UN pin on the top and a 1 - 11 1/2 NPT box on the bottom—enable it to be seamlessly integrated into a wide range of intervention toolstrings. These common connection types ensure compatibility with existing downhole equipment and facilitate quick assembly and deployment.

Manufactured from high-strength alloy steel or similar materials, the tubing end locator is built to withstand typical downhole conditions, including high pressure, elevated temperatures, and corrosive fluids commonly found in oil and gas wells. Its purely mechanical design minimizes maintenance requirements and reduces the risk of failure compared to electronic alternatives.

This tool is particularly valuable in wells where tubing length may have changed due to wear, repairs, or previous interventions, offering an essential measure of control and confidence in complex well environments.

View Details

ESP Straight Pull 7" HS Packer

The Ballycatter Model WC-ESP Straight Pull 7” Packer is a hydraulic-set production packer built for ESP completions in 7” casing, offering secure wellbore isolation and efficient ESP deployment. Its pass-through section ensures uninterrupted power delivery to the ESP unit, while the bi-directional slips anchor the packer against pressure fluctuations and tubing movement. Designed for high-pressure and high-temperature wells, its single-piece mandrel construction and Acner Array Packing Element provide exceptional durability and sealing reliability.

The WC-ESP Straight Pull 7” Packer is set hydraulically by pressurizing the tubing against a plugging device, locking the packer in place for long-term performance. The straight pull retrieval mechanism enables fast and hassle-free removal, reducing intervention time and operational costs. Compatible with all major cable pack-off or feed-thru devices, this packer is a versatile, high-performance solution for ESP completions in medium-sized casing applications.

View Details

320 GC Hydraulic Excavator

BOOM AND STICKS 5.7 m (18'8") Reach boom CAB Rollover protective structure (ROPS) Mechanical-suspension seat High-resolution 203 mm (8 inch) LCD touchscreen monitor CAT TECHNOLOGY Cat Product Link™ Remote Flash Remote Troubleshoot Auto hammer stop ELECTRICAL Two 1,000 CCA maintenance-free batteries Programmable time-delay LED working lights LED chassis light, left-hand/right-hand boom lights, cab lights ENGINE Cat C4.4 single turbo engine Two selectable power modes Auto engine speed control Auto engine idle shutdown 52° C (125° F) high-ambient cooling capacity -32° C (-25° F) cold start capability Double element air filter with integrated pre-cleaner Reversible electric cooling fans HYDRAULIC SYSTEM Boom and stick regeneration circuits Boom and stick lowering check valves Auto warm up Auto two-speed travel Boom and stick drift reduction valve Slider joysticks Tool control (two pumps, one/two way high-pressure flow) SAFETY AND SECURITY Rearview and right-hand-sideview cameras Ground-level engine shutoff switch Right-hand handrail and hand hold Signaling/warning horn SERVICE AND MAINTENANCE Sampling ports for Scheduled Oil Sampling (S·O·S) Ground-level and platform-level engine oil dipsticks UNDERCARRIAGE AND STRUCTURES Tie-down points on base frame 3700 kg (8,160 lb) counterweight (Turkey only) 4200 kg (9,300 lb) counterweight View Details

9 5/8" HP-5 Hydraulic Set Production Packer

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Safety Valve (Subsurface) 3.63 inch WI

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Ambient Pressure SSSV 5-1/2

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

HDI 2000B Pressure Gauge System

The HDI 2000B Pressure Gauge System is a panel-mounted electronic device designed to measure and display high-pressure levels accurately in industrial and oilfield settings. It monitors pressures up to 20,000 psi with an accuracy of plus or minus 0.50 percent of full scale, making it suitable for critical applications where precise pressure monitoring is essential for safety and operational control.

The system consists of two main components: a digital gauge display and a remote pressure sensor connected by an interconnect cable. This design allows the sensor to be installed directly at the pressure source, such as a wellhead, pump, or manifold, while the display is mounted in a more accessible location for easy reading and monitoring.

The gauge features a six-inch liquid crystal display that combines a five-digit numeric readout with an analog bar graph composed of 101 segments. This clear and detailed display makes it easy to quickly understand both the exact pressure value and its trend, even in low-light or harsh environments. The display can be read from up to 35 feet away.

Power is supplied by a replaceable 3.6-volt battery designed to last between 12 and 18 months under continuous operation. Calibration and configuration data are stored in memory that does not require power, ensuring settings remain intact even when the battery is replaced or the system is powered off.

The pressure sensor employs strain gauge technology and is compatible with a wide range of connection types including standard pipe threads and flanges. This allows the system to be used across various equipment and pressure ranges, while simplifying maintenance by enabling cross-compatibility of sensors.

Optional analog outputs provide 4–20 mA or 0–1 volt signals to connect the gauge to control systems, data loggers, or remote displays. This supports centralized monitoring and integration with automated process control.

In oil and gas operations, the 2000B system is commonly used to monitor pressure at wellheads to ensure safe extraction pressures, on pumps to maintain correct fluid flow and prevent overpressure damage, and on manifolds to track pressure differentials between flow lines. Accurate, real-time pressure data from this system helps operators detect anomalies early, avoid equipment failure, and optimize production rates while maintaining safe operating conditions. Its robust design and modular installation make it well-suited for harsh field environments where reliability and ease of maintenance are critical.

View Details

LM2500 Gas Turbine

The LM2500 Gas Turbine is a high-efficiency power unit designed for use in industrial, marine, and utility applications. It’s commonly used for grid support, combined heat and power, and in mobile or remote power installations.

The turbine uses a single-rotor gas generator that can be connected to a power turbine. Inside, it includes a 16-stage compressor, an annular combustor, and a two-stage high-pressure turbine—to deliver strong performance in demanding environments.

Built for flexibility, the LM2500 is well-suited for operations that require frequent start-and-stop cycles. It can ramp up from a cold shutdown to full power in under five minutes, making it a reliable option for fast, on-demand power delivery.

Adding to its versatility, the LM2500 supports a wide range of fuels—including natural gas, diesel, aviation fuel, naphtha, LPG, ethane, ethanol, biodiesel, and more. This fuel flexibility makes it easy to integrate into different operating environments.

Its proven adaptability and performance have made the LM2500 the most widely used gas turbine in the 25–37 megawatt range.

In addition to high efficiency and reliability, the LM2500 delivers low emissions—even in challenging environments or when water availability is limited. With control system redundancy and several configuration options, it offers a customizable solution for dependable, efficient power generation.

View Details

7" Mech-1 Single Grip Mechanical Set Packer for 38 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type