The 3 Valve Manifold T Type – Pipe to Flange is specifically engineered to connect impulse lines to differential pressure transmitters, ensuring accurate measurement and reliable operation in industrial systems. Its T-type configuration features two block valves, one equalizer valve, and vent/test ports, allowing operators to isolate the transmitter, equalize pressure, and perform maintenance or calibration safely without disrupting the overall process. This setup is particularly useful in oil and gas, petrochemical, and process control applications where continuous operation is critical.

The manifold is built with 1/2” Female NPT Pipe to Flange connections set on 54mm (2-1/8”) centers, providing standardized and secure interfacing with pressure transmitters. High-quality construction includes metal-to-metal body and bonnet seals to withstand pressures up to 6000 PSI and temperatures ranging from -50°C to 230°C, with higher temperature ratings available using graphite materials. The design ensures leak-free performance through features such as self-centering, non-rotating valve tips, back-seated stems for added security, and rolled threads for smooth operation.

Additional operational benefits include easily adjustable gland retainers for maximum packing stability, removable T-handles for low-torque operation, and dust caps to protect actuating threads. Each valve is 100% factory tested, with traceable heat codes, and meets rigorous standards including ASME B16.34, MSS-SP-99, and ASME B31.3, making the manifold a robust and reliable solution for high-pressure industrial applications.

Reducing adapters Female to Male NPT are used to connect pipes or instrumentation lines of different diameters in oil and gas systems. They allow a larger pipe or fitting to join with a smaller one without leaking, ensuring the flow of liquids or gases remains safe and controlled. These fittings are especially useful in situations where space is limited or existing piping needs to be adapted to new equipment.

They are made from high-quality materials such as stainless steel, brass, or carbon steel, which can handle pressures up to 10,000 PSI. The female NPT side threads internally to receive a male pipe, while the male NPT side threads externally to connect to a female fitting. This combination provides a secure, leak-resistant connection that is durable even under high pressure, vibration, or temperature changes.

Reducing adapters are widely used in oil and gas production, processing, and distribution systems.

They are ideal for connecting instrumentation, control systems, chemical injection lines, or any piping where size changes are required. Their compact design and simple installation make them a practical choice for engineers and technicians who need reliable connections in complex piping networks.

The Check Valve Poppet Type with 1/4" NPT tube ends is a compact, high-performance valve designed to provide reliable one-way flow control in hydraulic and pneumatic systems. Built for demanding applications, this valve is rated up to 6000 PSI working pressure, making it suitable for both high-pressure and industrial environments.

The poppet design ensures a tight seal when backflow occurs, preventing fluid from moving in the reverse direction while allowing free flow in the intended direction. This not only protects sensitive system components but also maintains system efficiency by eliminating leakage.

With a cracking pressure typically available from 1 to 25 psi, the valve can be selected to suit specific operational needs, ensuring smooth opening without unnecessary resistance. The female NPT tube end connection provides a secure, leak-free fit, compatible with a wide range of standard piping and tubing systems. Constructed from durable stainless steel or carbon steel depending on configuration, the valve offers excellent resistance to wear, corrosion, and high-pressure fatigue.

Commonly used in oil and gas, the poppet-type check valve provides consistent performance, low maintenance requirements, and long service life.

Its simple yet effective design ensures operators can trust it in critical applications where preventing reverse flow is essential for safety and operational reliability.

Tube Fittings Male Connectors are precision parts used to connect tubing directly to a threaded port in oil and gas systems. One side of the connector is designed for tubing, while the other side has an ISO tapered male thread that screws into valves, manifolds, pumps, or other equipment.

These connectors are made for high-pressure applications, with working pressure ratings up to 6000 PSI. The tapered thread design creates a tight, reliable seal that prevents leaks of gas or liquid, even under vibration, temperature changes, or fluctuating pressures.

They are commonly used in drilling rigs, wellhead equipment, hydraulic control lines, instrumentation systems, and process piping. Available sizes include 1/8”, 5/16”, 3/8”, and 1/2”, making them suitable for a wide range of tubing diameters.

By ensuring a strong, leak-free connection, Tube Fittings Male Connectors improve safety, reduce downtime, and support efficient operation in demanding oil and gas environments.

This 2-way panel-mounted ball valve with Tube OD connections is designed to control, start, or stop fluid flow in oil and gas tubing systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or bypass lines.

The Tube OD connections allow direct attachment to tubing without additional fittings, simplifying installation and reducing potential leak points. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves are centralized or where physical access to the tubing is limited.

The valve features a floating ball design that ensures leak-proof shut-off under high-pressure conditions. Standard working pressure is 6000 PSI. It is designed and tested to ASME B16.34 for pressure-temperature ratings, and valve ratings follow ASME Process Piping Code B31.3. The valve has been type tested to MSS-SP-99 and offers a temperature range from –40 °F to 450 °F (–40 °C to 232 °C).

Operation is simple with a quarter-turn handle, providing fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Each valve is factory tested pneumatically with nitrogen gas at 1000 psig for seat and stem leakage, with a maximum allowable leak rate of 0.1 sec/min. Optional additional tests, such as vibration, temperature, and helium, are available.

The valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments. Heat code traceability ensures material verification and quality assurance.

The HDI 2000B Pressure Gauge System is a panel-mounted electronic device designed to measure and display high-pressure levels accurately in industrial and oilfield settings. It monitors pressures up to 20,000 psi with an accuracy of plus or minus 0.50 percent of full scale, making it suitable for critical applications where precise pressure monitoring is essential for safety and operational control.

The system consists of two main components: a digital gauge display and a remote pressure sensor connected by an interconnect cable. This design allows the sensor to be installed directly at the pressure source, such as a wellhead, pump, or manifold, while the display is mounted in a more accessible location for easy reading and monitoring.

The gauge features a six-inch liquid crystal display that combines a five-digit numeric readout with an analog bar graph composed of 101 segments. This clear and detailed display makes it easy to quickly understand both the exact pressure value and its trend, even in low-light or harsh environments. The display can be read from up to 35 feet away.

Power is supplied by a replaceable 3.6-volt battery designed to last between 12 and 18 months under continuous operation. Calibration and configuration data are stored in memory that does not require power, ensuring settings remain intact even when the battery is replaced or the system is powered off.

The pressure sensor employs strain gauge technology and is compatible with a wide range of connection types including standard pipe threads and flanges. This allows the system to be used across various equipment and pressure ranges, while simplifying maintenance by enabling cross-compatibility of sensors.

Optional analog outputs provide 4–20 mA or 0–1 volt signals to connect the gauge to control systems, data loggers, or remote displays. This supports centralized monitoring and integration with automated process control.

In oil and gas operations, the 2000B system is commonly used to monitor pressure at wellheads to ensure safe extraction pressures, on pumps to maintain correct fluid flow and prevent overpressure damage, and on manifolds to track pressure differentials between flow lines. Accurate, real-time pressure data from this system helps operators detect anomalies early, avoid equipment failure, and optimize production rates while maintaining safe operating conditions. Its robust design and modular installation make it well-suited for harsh field environments where reliability and ease of maintenance are critical.

The HDI 2250 Valve Position Indicator System provides a reliable method to monitor the open or closed status of manual and hydraulically operated gate valves on choke manifolds. It offers two modes of position verification: a clear visual indicator mounted directly on the valve, and an electronic signal transmitted remotely to control rooms or monitoring systems. This dual feedback delivers real-time valve position information both locally and from a distance, enhancing operational control and safety.

The system is compatible with a wide range of rising and non-rising stem gate valves from various manufacturers, adding position monitoring without compromising valve integrity or certification. An adapter enables installation on valves that lack built-in position feedback. The sensor is an inductive Namur type housed within a rugged 316 stainless steel case, engineered for hazardous oilfield environments. It operates on a 5 to 25 volts DC power supply, making it suitable for integration with most industrial control systems.

Weighing 15.3 pounds with the junction box mounted, the 2250 is built for durability and long-term performance in demanding onshore and offshore conditions. Once installed, it requires minimal maintenance, reducing operational downtime.

The system connects easily to local displays and remote monitoring platforms, offering a comprehensive view of valve positions across the manifold. It supports both Namur and proximity sensors, providing flexibility to meet different installation requirements.

The 2250 stands out for its ability to retrofit manual valves without modification, its robust construction for harsh environments, and dual visual and electronic position reporting. These features make it a practical, dependable choice for improving safety and operational awareness in oil and gas valve management.

The 1/2" poppet check valve with female × female NPT connections is designed to allow fluid to flow in only one direction while preventing any backflow. This is important in oil and gas systems because backflow can damage pumps, pipelines, and other equipment. The valve is commonly used in medium-sized lines, instrumentation, sampling, and control applications where reliable flow control is required.

The valve operates at a standard pressure of 6000 psi, with optional configurations available for pressures up to 10000 psi. Cracking pressures, the minimum pressure needed to open the valve, can be selected from 1/3 to 25 psi, giving flexibility to match the needs of specific systems. Its poppet mechanism responds quickly to flow changes and provides a tight seal, ensuring consistent performance and preventing leaks.

Made from corrosion-resistant materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, the valve is suitable for harsh oil and gas environments. Female × female NPT connections allow for secure inline installation without extra fittings, reducing the risk of leaks and simplifying integration into existing piping.

Each valve is factory tested for cracking and reseal performance, ensuring it opens and closes reliably. Heat code traceability is provided to verify material quality. Additional testing, such as vibration, temperature, and helium testing, can be requested for applications requiring high reliability.

This valve is compact, durable, and designed for long-term operation with minimal maintenance. It helps maintain system pressure, protects critical equipment, and ensures that oil and gas systems operate safely and efficiently.