Ballycatter.ca - Industrial Equipment

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them. View Details

Lamp KL5MS MSHA

Introducing the Wisdom KL5MS MSHA Corded Miner's Cap Lamp – A New Standard in Mining Safety and Efficiency, Exclusively from Provix Provix is excited to unveil the latest addition to its range of high-quality mining equipment – the Wisdom KL5MS MSHA Corded Miner's Cap Lamp. This innovative product is not just a lighting solution; it's a commitment to safety, efficiency, and reliability in the demanding world of mining. Exceptional Lighting for Enhanced Safety Equipped with a powerful 7,800mAh battery, the KL5MS MSHA guarantees 13 hours of continuous lighting, ensuring that miners are never left in the dark. The main light LED, with a working voltage of 3.0V and current of 640mA, delivers a luminous flux of 340 lm. The impressive lighting degree of 18,000 lx at 1 meter enhances visibility significantly, making it a vital tool for miners. MSHA & ATEX M1 Certified for Maximum Safety The KL5MS MSHA goes above and beyond when it comes to safety. It is both MSHA (Mine Safety and Health Administration) and ATEX M1 certified, meeting the highest safety standards in the mining industry. This certification underscores our commitment to providing equipment that ensures the utmost safety of miners in potentially hazardous environments. Built to Last in Harsh Conditions Durability is a key feature of the KL5MS MSHA. The lamp has a main light lifespan of 50,000 hours and an auxiliary light lifespan of 40,000 hours. Its IP68 water-proof rating and explosion-proof design make it ideal for use in various mining conditions. Additionally, the battery life spans 1,200 cycles, ensuring long-term reliability. Ergonomically Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL5MS MSHA is designed for comfort. Its compact dimensions (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure it is not cumbersome, allowing for mobility and ease during long shifts. Efficient and Convenient Charging The KL5MS MSHA is as practical as it is powerful. It features a convenient USB charging system, enabling quick and easy recharging. The charging time of 4 to 7.5 hours ensures the lamp is ready for use with minimal downtime. Get Yours Today The Wisdom KL5MS MSHA Corded Miner's Cap Lamp is available now at Provix. Visit our website at www.provix.net, call us, or email for more information. Elevate your mining operations with the Wisdom KL5MS MSHA – where safety and efficiency meet. View Details

Gauge Root Valve – Male x Female – Lagging Extension – 1/4” NPT – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension in 1/4” NPT is a small but robust valve used to safely isolate pressure gauges in pressurized systems. It is designed to handle pressures up to 6000 PSI and temperatures from -50°C to 230°C, providing a reliable seal and leak-free operation. The lagging extension lets the valve be operated without removing insulation, protecting both the system and the operator.

The valve includes features to make it safe and easy to use: a back seat on the stem for extra security, a self-centering non-rotating tip for consistent shutoff, and an adjustable gland retainer to keep the packing tight. The removable T-handle allows smooth operation with minimal effort, while the dust cap prevents dirt or debris from entering the valve. All valves are factory tested for performance, include heat code traceability, and can be made from materials compliant with NACE MR 01-75 for corrosion resistance.

This valve is ideal for oil and gas systems where isolating gauges safely, maintaining insulation, and ensuring reliable operation are essential.

View Details

Welding Machine TIG AC/DC 501 Pulse

Drive Down Bailer

The Drive Down Bailer is used to collect samples or remove debris from the wellbore. The Bailer is jarred into the sample or debris forcing material into the cylinder, which is retained by a ball or flapper type non-return seat. The bailer is then jarred upwards and retrieved. Applications • Recovery of in-fill samples from wellbore or sump • Removal of compacted debris or sand from flow control devices View Details

Flare Gas Capture

Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations. View Details

Tracked-hoe Excavator of various sizes and brands available to fit your needs

Excavators contain four major pieces - a boom, dipper, bucket, and cab, all of which are located on a rotating platform known as the house. Excavators are versatile pieces of equipment that can be used in the following applications (to name just a few); Digging trenches, holes, and foundations Demolition with hydraulic claws, cutters, and breaker attachments Mining, especially, but not only open-pit mining Driving piles, in conjunction with a pile driver Dredging rivers Drilling shafts and rock blasting Snow removal with snowplow and snow blower attachments Forestry mulching Handling materials Brush cutting with saws and mower attachments General landscaping Forestry work Construction View Details

Electrode Holder EH 401

Introducing Canaweld's Electrode Holder EH 401 - Power, Precision, and Durability in Your Hands! When it comes to welding, having the right tools in your hands can make all the difference. That's why Canaweld is proud to present the EH 401 Electrode Holder - a Canadian-designed, heavy-duty, and versatile tool that will elevate your welding experience to new heights. Designed to Perfection - Light Yet Heavy Duty: At Canaweld, we understand the importance of balance in welding equipment. The EH 401 Electrode Holder combines the best of both worlds - it is exceptionally light in weight for easy handling, yet built with the sturdiness and durability of premium copper and brass alloys. Weld with confidence, knowing that our Electrode Holder is engineered to withstand the toughest welding conditions. Meeting International Standards - Quality You Can Trust: Your safety is our top priority. That's why the EH 401 Electrode Holder has undergone rigorous testing according to international standards, including IEC 60974-11. It has passed all electrical, impact, insulation, and heating tests with flying colors, ensuring that you get a reliable and safe tool every time. Unleash the Power - 400 Amps at 35% Duty Cycle: When you need the power to handle heavy welding tasks, the EH 401 delivers. With a robust 400 Amps at 35% Duty Cycle in 104°F/40°C, this Electrode Holder is ready to tackle any challenge you throw its way. Whether you're working on pipelines, structural welding, or any oil and gas project, the EH 401 is your reliable companion. Built for Convenience - Easy Cable Connection and More: Welding should be seamless, and that's why we've designed the EH 401 with ease of use in mind. Its special design allows for quick and simple cable connection, making setup a breeze with the included free spanner. A copper bush ensures a secure and damage-free connection to the welding cable, enhancing electricity conductivity and extending the life of the connection. Flexible and Adaptable - Your Welding Ally: The EH 401 Electrode Holder offers a 6-position jaw pattern, allowing you to use it in 45, 90, or 180-degree positions. Versatility is key, and this holder provides the flexibility you need to achieve precise welding results, no matter the angle or position. Get Your Canaweld EH 401 Electrode Holder Today: With Canaweld's EH 401 Electrode Holder in your hands, welding becomes an art. Unlock the power, precision, and durability that our Canadian-designed holder brings to the table. Whether you're a seasoned professional or just starting on your welding journey, the EH 401 will be your trusted welding ally. Experience the Canaweld difference - Choose the EH 401 Electrode Holder and take your welding to the next level! View Details

LM2500+G4 SAC Gas Turbine

The Single Annular Combustor (SAC) version of the LM2500+G4 is designed for oil and gas applications that prioritize consistent performance, fuel flexibility, and emissions control—such as LNG facilities, gas processing plants, and pipeline compression, both onshore and offshore.

What makes the SAC version different is its simpler combustor design compared to dual annular or premix types. The SAC uses a through-flow, venturi swirler to ensure an even temperature profile at the turbine inlet, helping extend hot section life. It features individually replaceable fuel nozzles, a durable machined-ring liner, and a thermal barrier coating for better resistance to high temperatures and corrosion. This design supports both dry operation (with higher emissions) and water or steam injection to reduce NOx when needed—making it adaptable to site-specific emission regulations.

The LM2500+G4 SAC builds on the proven LM2500+ design, with approximately 10% more power. This gain comes from increased airflow, improved internal cooling, and material upgrades—while keeping the same number of compressor and turbine stages. The 17-stage high-pressure axial compressor and the basic engine layout remain unchanged, making it easy to maintain and service.

The engine can run on a wide range of liquid and gas fuels, allowing flexibility in remote or supply-constrained locations. It achieves up to 40% thermal efficiency in simple cycle mode. Water-injected operation enables NOx emissions as low as 25 ppm (gas) and 42 ppm (liquid).

In short, the LM2500+G4 SAC is well-suited for high-power mechanical drive and power generation in harsh or remote oil and gas environments, offering a balance of power output, fuel versatility, and emissions control.

View Details

LM2500 Gas Turbine

The LM2500 Gas Turbine is a high-efficiency power unit designed for use in industrial, marine, and utility applications. It’s commonly used for grid support, combined heat and power, and in mobile or remote power installations.

The turbine uses a single-rotor gas generator that can be connected to a power turbine. Inside, it includes a 16-stage compressor, an annular combustor, and a two-stage high-pressure turbine—to deliver strong performance in demanding environments.

Built for flexibility, the LM2500 is well-suited for operations that require frequent start-and-stop cycles. It can ramp up from a cold shutdown to full power in under five minutes, making it a reliable option for fast, on-demand power delivery.

Adding to its versatility, the LM2500 supports a wide range of fuels—including natural gas, diesel, aviation fuel, naphtha, LPG, ethane, ethanol, biodiesel, and more. This fuel flexibility makes it easy to integrate into different operating environments.

Its proven adaptability and performance have made the LM2500 the most widely used gas turbine in the 25–37 megawatt range.

In addition to high efficiency and reliability, the LM2500 delivers low emissions—even in challenging environments or when water availability is limited. With control system redundancy and several configuration options, it offers a customizable solution for dependable, efficient power generation.

View Details

4 1/16" Coiled Tubing Hanger for 10,000 PSI

The 4 1/16” 10M Coiled Tubing Hanger is engineered to provide reliable mechanical support and pressure containment for coiled tubing strings used in demanding oil and gas well intervention operations. Specifically designed to accommodate coiled tubing sizes up to 3 1/2” outer diameter, this hanger is rated for high-pressure applications up to 10,000 psi (10M), making it suitable for wells with challenging downhole conditions and high-pressure requirements.

Constructed with robust materials and precision-engineered to meet API 6B and 6BX standards, the hanger ensures secure connection to wellhead equipment through flanged interfaces, enabling seamless integration into existing well infrastructure. The design incorporates a wireline entry sub that guides wireline tools into the tubing bore and provides a secondary annulus seal. This feature not only facilitates the safe deployment of wireline tools but also restricts any upward movement of the coiled tubing, maintaining tubing position and well control during operations.

This coiled tubing hanger supports a range of intervention tasks, including well cleanouts, stimulations, logging, and workover activities, by securely suspending the tubing and maintaining pressure integrity at the wellhead. The ability to reliably seal the annulus while supporting heavy-duty tool strings helps reduce operational risks, prevents fluid leaks, and minimizes well downtime. Its capacity to handle larger tubing sizes and high pressures makes the 4 1/16” 10M hanger especially valuable in complex wells where robust mechanical support and dependable sealing are critical for safe and efficient well intervention.

View Details

Custom Gas Solutions

Custom Designed Gas Solutions: Your Partner in Customized Excellence with Lovat Gas Solutions At Lovat Gas Solutions, our approach is simple yet effective: we develop custom gas solutions that are specifically designed to meet the unique requirements of your application. As a service-oriented company, we are dedicated to delivering solutions that work seamlessly for your business. It is this commitment to excellence that sets us apart and earns us the loyalty of our valued customers. Why choose Lovat Gas Solutions for your custom gas needs? 1. Tailor-Made Solutions: We understand that your business has distinct requirements and challenges. That's why we take a personalized approach to develop solutions that are specifically tailored to your application. Whether you need a gas supply solution, operational support, or a comprehensive project plan, we design and deliver the solution that perfectly fits your needs. 2. Customer-Centric Focus: Your satisfaction is our top priority. We value your partnership and strive to build long-lasting relationships based on trust and exceptional service. Our team of experts takes the time to listen to your needs, understand your goals, and work collaboratively to deliver the optimal solution for your business. 3. Service-Oriented Approach: Lovat Gas Solutions is committed to providing the highest level of service to our customers. From the initial consultation to ongoing support, we prioritize responsiveness, reliability, and open communication. Our dedicated team is always ready to address your questions, concerns, and evolving needs. 4. Proven Track Record: Our customers love working with us because we consistently deliver results. With a wealth of industry experience, our team has a proven track record of success in developing and implementing effective gas solutions across various sectors. We are confident that we can exceed your expectations and provide you with a solution that works seamlessly for your application. Choose Lovat Gas Solutions as your partner for custom gas solutions. Experience the difference of working with a company that is dedicated to developing tailored solutions that deliver optimal results for your business. Contact us today to discuss your specific needs, and let our experienced team design a custom gas solution that works for you. Together, we will achieve excellence and drive your success with Lovat Gas Solutions. View Details

Ball Valve Lever Operated – 3-Way Female x Female Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Female × Female Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows flow to be directed between multiple pipelines, making it ideal for applications such as flow diversion, sampling lines, injection systems, or process line bypasses.

The valve supports split flow and is suitable for pressures up to 6000 PSI (maximum 10000 PSI on request) and temperatures from –40 °F to 450 °F (–40 °C to 232 °C).

The female × female connections enable secure inline installation without the need for male fittings, simplifying assembly and reducing potential leak points. The valve features a floating ball design for seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions.

It is manufactured and tested to ASME B16.34 standards, pressure-temperature rated to ASME B31.3, and type-tested to MSS-SP-99, providing verified performance and reliability in industrial environments.

Operation is efficient and reliable with a quarter-turn lever, allowing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, while replaceable seats and packings extend service life. Fire-safe designs and optional compliance with NACE MR0175 standards are available, and heat code traceability ensures material verification.

Built for demanding industrial environments, the valve is suitable for a wide range of oil and gas applications where flow control, diversion, and durability are critical.

View Details

ET-30 Single Stage Steam Turbine

Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Hydraulic Set Large Bore Retrievable 7” Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for Enhanced Performance

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer, designed to optimize production, injection, and zonal isolation applications. Its expanded internal diameter provides increased flow capacity, reducing pressure drop and improving overall well efficiency. The packer is set using tubing pressure, eliminating the need for tubing manipulation and making it particularly effective in low hydrostatic head wells where conventional setting methods may be challenging. Once engaged, the multiple packing element system ensures a mechanically locked, high-integrity seal, sustaining pack-off force throughout its operational life.

To maintain wellbore stability, the hydraulic hold-down pistons engage after setting, preventing movement due to differential pressure. The body lock ring securely traps the setting force, ensuring that bottom-hole pressure fluctuations or tubing contraction do not compromise the seal. The large bore configuration makes the HPL-1 packer especially suited for high-volume production, deviated wells, and applications requiring unrestricted flow paths for enhanced reservoir performance.

For retrieval, operators can apply a straight upward pull or utilize the optional right-hand rotational release, depending on well conditions. The shear release mechanism enables controlled removal, minimizing downtime and reducing the risk of stuck tools. With its large-bore capability, secure hydraulic setting, and reliable retrievability, the HPL-1 packer is a high-performance solution for maximizing production efficiency, minimizing flow restrictions, and optimizing well completions.

View Details

Large Aluminum Jaws for ROV

Introducing Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations We are proud to announce the launch of the latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact us today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics. View Details

9 5/8" Hydraulic Set Large Bore Retrievable Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for 9 5/8” Casing

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer engineered for 9 5/8” casing, providing enhanced flow capacity and efficient wellbore isolation for production, injection, and zonal isolation applications. Designed to maximize flow efficiency while maintaining well integrity, this packer is set hydraulically by applying tubing pressure, eliminating the need for mechanical tubing manipulation. The expanded internal diameter minimizes flow restrictions, making it an ideal solution for high-rate production and injection wells. Once set, the multiple packing element systemensures a mechanically locked, long-lasting seal, maintaining pack-off force throughout its operational life.

To prevent movement under differential pressure, the hydraulic hold-down pistons engage after setting, while the body lock ring secures the setting force, ensuring bottom-hole pressure variations or tubing contraction do not affect the seal. The large bore design allows for unrestricted flow paths, improving overall reservoir performance and artificial lift system efficiency. This makes it particularly valuable in ESP, gas lift, and other high-flow applications, where maintaining maximum production rates is critical.

For retrieval, operators can use a straight upward pull or an optional right-hand rotational release for controlled removal, reducing the risk of stuck tools and minimizing intervention time. With its high-capacity flow path, secure hydraulic setting, and efficient retrievability, the HPL-1 packer for 9 5/8” casing is an optimal solution for operators looking to enhance well performance, reduce pressure losses, and maintain long-term well integrity.

View Details

Safety Valve (Subsurface) 3.63 inch WI

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Solar Charge Controller

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue View Details

MS-251EC Extraction Condensing Steam Turbine

Unlock Unparalleled Efficiency with the Kessels MS-251 EC Extraction Condensing Steam Turbine: Where Precision Meets Power In the ever-evolving landscape of the oil and gas industry, precision, reliability, and sustainability reign supreme. Kessels Steam Turbines is proud to introduce the MS-251 EC Extraction Condensing Steam Turbine, a technological marvel that redefines excellence in steam turbine technology. Mastery of Extraction Condensing Turbines Extraction condensing turbines are the backbone of industries demanding a constant pressure steam flow for diverse processes. The MS-251 EC shares structural characteristics with condensing turbines, making it the ideal choice when you need a dependable source of constant pressure steam for your operations. Efficiency Perfected What sets the MS-251 EC apart is its remarkable capability to inject low-pressure steam from the second admission valve chest. This ingenious feature optimizes the utilization of available plant resources to meet power demands, making our turbine an indispensable asset in co-generation scenarios. Steady Power, Unwavering Performance In co-generation settings, where maintaining a consistent power supply despite fluctuations in process steam demands is paramount, the MS-251 EC excels. This turbine ensures your power generation remains steady, providing a rock-solid foundation for your operations. Ultimate Versatility At Kessels, we understand that each industry has unique needs. In some cases, you may require both bleed and controlled extraction steams from the condensing turbine. Our MS-251 EC is designed to meet these demands, offering the flexibility of a bleed cum extraction condensing turbine. Why Choose Kessels? Choosing Kessels Steam Turbines isn't just a business decision; it's a commitment to excellence, innovation, and reliability. Our MS-251 EC Extraction Condensing Steam Turbine embodies these principles, offering you: Unmatched Efficiency: Harness low-pressure steam resources efficiently, reducing energy waste and maximizing productivity. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbine ensures uninterrupted operations, even in the most demanding industrial environments. Consistent Power Supply: Experience uninterrupted power generation, regardless of variations in process steam demands, ensuring your operations run seamlessly. Exceptional Versatility: Adapt effortlessly to your unique requirements, whether you need bleed or controlled extraction steams, with the confidence that Kessels' expertise provides. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive landscape of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-251 EC Extraction Condensing Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

Electric Submersible Pump Straight Pull 4.5" Packer

The Ballycatter Model WC-ESP Straight Pull 4.5” Packer is a compact, hydraulic-set production packer optimized for ESP completions in 4.5” casing. It features a pass-through section for ESP power cables, allowing seamless electrical connectivity between the surface and the ESP unit below.

The single-mandrel design with Acner Array Packing Element ensures superior sealing integrity, even in high-pressure and high-temperature wells. Its bi-directional slip system resists pressure from both above and below, providing secure anchoring and preventing unwanted movement.

Setting is achieved hydraulically by applying tubing pressure, locking the packer in place for long-term well isolation. Retrieval is simplified through a straight pull mechanism, eliminating the need for complex downhole tools and ensuring fast, efficient removal in standard and deviated wells. Compatible with all major ESP cable pack-off and feed-thru devices, the WC-ESP Straight Pull 4.5” Packer delivers reliability and ease of operation in compact wellbore conditions.

View Details

Pipe Fittings Hex Reducing Nipples Male NPT – 1/8", 1/4", 3/8", 1/2" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Hex Reducing Nipples Male NPT are pipe fittings designed to connect two female-threaded pipes of different diameters while maintaining a secure and leak-resistant seal. The male tapered threads provide a tight connection that prevents fluid leakage, which is especially important in high-pressure systems.

These fittings are widely used in the oil and gas industry, chemical processing, and instrumentation applications where a reduction in pipe size is required without adding extra joints.

They are manufactured from high-quality materials such as stainless steel, brass, and other compatible alloys, ensuring durability and resistance to corrosion. The fittings are precision-machined from bar stock to provide burr-free internal surfaces for smooth flow and to reduce turbulence within the system. Threads are carefully capped and packed to prevent damage during transit.

Hex Reducing Nipples are rated for pressures up to 10,000 PSI and comply with ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228 standards. They are designed for reliable performance in ambient temperatures from -28 to 37°C (-20 to 100°F) and support efficient installation with standard wrenches thanks to the hex shape, which allows secure tightening. These features make them suitable for high-pressure and instrumentation piping systems where both reliability and traceability are required.

View Details

Valve Manifolds 2 Valve Manifold L Type – Pipe to Pipe 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The L type 2 valve manifold is a compact and reliable solution designed for connecting impulse lines to pressure transmitters or gauges in industrial systems. Its primary purpose is to allow safe and efficient measurement of process pressures while providing the ability to isolate, vent, or calibrate instruments without disrupting the process.

The L type configuration refers to the layout of the two valves, arranged in an L shape, which allows for simple and intuitive operation. This design enables the user to block the process pressure, bleed off trapped pressure, and perform calibration on static pressure transmitters or gauges. The arrangement minimizes installation space while ensuring clear and accessible operation.

Pipe to pipe manifolds are designed to connect directly to process lines using standard piping connections. This allows for straightforward integration with impulse lines and reduces the need for additional fittings. The manifold provides a secure and leak-free connection while maintaining easy access for maintenance, calibration, and testing of instruments. Overall, the L type 2 valve manifold combines compact design, operational simplicity, and high reliability for critical measurement applications.

View Details

Inverter and Charger Combination

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue View Details

5" Mech-1 Single Grip Mechanical Set Packer for 15-16 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

CSA 60 unit, Locking FAST charger rack

Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment. View Details

4 1/2" HP-6 Hydraulic Set High Angle Production Packer

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Surface-Controlled Safety Valves for 5” Casing Completion

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 5" SCSSSV (Surface-Controlled Subsurface Safety Valve) is used to shut in a well if there\'s a sudden loss of control—such as equipment failure or surface damage. Installed in the upper wellbore, it acts as a critical safety barrier, closing automatically if surface control pressure is lost. This helps protect people, equipment, and the reservoir from uncontrolled flow.

This valve is designed for 5" (127 mm) tubing and fits a 4.125" landing nipple. It’s rated for working pressures up to 5,000 psi and has a 2.38" internal bore, making it well-suited for high-rate production wells. The valve includes a self-equalizing feature that helps reduce pressure differences across the flapper during reopening, supporting smoother restarts and lowering mechanical stress.

Because it’s wireline-retrievable, the internal components can be serviced or replaced without pulling the tubing—saving time and reducing intervention costs. The flapper is machined from solid bar stock for durability, and the sealing surfaces are positioned out of the flow path when open, helping extend the life of the valve by reducing wear.

This size is typically chosen when both high flow capacity and reliable emergency shut-in protection are required.

View Details

Lock Mandrel Running Tool

Maximize Your Downhole Success with HOCA Oil Tools' Running Tools for Lock Mandrels In the complex world of downhole operations, the necessity for precision, safety, and efficiency cannot be overstated. HOCA Oil Tools, a leader in providing advanced downhole slick line tools, introduces a range of Running Tools specifically designed for Lock Mandrels, ensuring seamless integration and operation in your wellbore activities. HOCA’s Running Tools for Lock Mandrels: Precision, Versatility, and Reliability Our Running Tools for Lock Mandrels are engineered with precision, crafted to deliver unmatched performance in downhole settings. These tools are essential for setting or positioning downhole flow controls and devices at predetermined depths efficiently and accurately. Designed for versatility, they accommodate various sizes and types of Lock Mandrels, ensuring compatibility and flexibility for different downhole requirements. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that set new standards in quality, efficiency, and reliability. Our Running Tools for Lock Mandrels are a testament to this commitment, designed to enhance your downhole operations and drive success. Incorporating our Running Tools into your downhole toolkit not only ensures optimal performance but also aligns your operations with the highest standards of precision and safety. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole success with innovative solutions and exceptional service. Choose HOCA Oil Tools’ Running Tools for your Lock Mandrels and elevate your downhole operations to new heights. Partner with us and experience the difference that precision engineering, reliability, and dedicated support can make in your wellbore activities. Embrace the future of downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency. View Details

Tube Fittings Male Connector ISO Parallel Thread – 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1" – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Tube Fittings Male Connector with ISO Parallel Thread is designed to join tubing to parallel-threaded ports in high-pressure systems. This fitting ensures a tight, leak-resistant seal that maintains system integrity under pressures up to 6000 PSI, making it suitable for demanding oil and gas applications.

Constructed from high-quality materials, the fitting is manufactured to precise tolerances to ensure proper ferrule deformation and consistent performance. The parallel thread design allows for a straightforward installation and secure connection without excessive torque, reducing the risk of thread damage or galling.

These fittings are used extensively in pipelines, instrumentation, and process systems where a reliable and durable connection is required. The male connector configuration allows it to mate with female threaded components, providing versatility in system design. The robust design also ensures excellent performance under vibration, temperature changes, and fluctuating pressures.

Overall, this fitting combines technical reliability with ease of use, making it suitable for both engineering and operational personnel who require dependable tubing connections in oil and gas environments.

View Details

Chemical Stimulation

Precision Chemical Stimulation with InWaTec Combined’s Mini-Coil Services In the realm of enhancing well productivity, chemical stimulation stands as a cornerstone technique, vital for improving hydrocarbon flow from reservoir to surface. InWaTec Combined proudly offers Mini-Coil Services, a highly specialized approach to chemical stimulation that addresses the need for precise fluid placement and robust performance under high pressures. Our Mini-Coil Tubing is the ideal conduit for delivering stimulation fluids in exact quantities directly to the target zones within the well. This precise delivery is critical for the effectiveness of chemical treatments, ensuring that every drop of stimulating fluid is utilized to its maximum potential. Advantages of Mini-Coil Tubing in Chemical Stimulation: High-Pressure Capability: The smaller diameter of our Mini-Coil Tubing allows for operations at significantly higher pumping pressures compared to traditional coiled tubing. This is particularly advantageous during chemical stimulation, where certain treatments require the application of fluids under substantial pressure to achieve optimal penetration and reaction within the reservoir. Precision in Fluid Placement: The precise placement of stimulation chemicals is crucial for the success of any treatment. Our Mini-Coil Tubing services ensure that the stimulation fluids are deposited exactly where needed, which is particularly beneficial in complex reservoirs or when targeting specific formation layers. Efficient Well Lifting: Post-stimulation, wells often require assistance to commence or resume production. The Mini-Coil Tubing is not only perfect for fluid delivery but also for well lifting operations, facilitating the transition from treatment to production smoothly and effectively. Tailored Operations: Understanding that flow rates and snubbing force are aspects where Mini-Coil Tubing has limitations, InWaTec Combined has optimized the design and operation of our Mini-Coil Services to maximize their strengths. Our team of experts can adjust operations to suit the specific conditions and requirements of each well, ensuring that the limitations are mitigated and the advantages are fully leveraged. InWaTec Combined’s Mini-Coil Services represent a fusion of innovation, precision, and efficiency. We bring this triad to every chemical stimulation project, ensuring that our clients' wells receive the most meticulous and effective treatment possible. By choosing InWaTec Combined for your chemical stimulation needs, you are opting for a partner dedicated to enhancing your well performance with cutting-edge solutions. Our Mini-Coil Services are a testament to our commitment to pushing the boundaries of what is possible in well intervention and stimulation. Experience the difference with InWaTec Combined’s Mini-Coil Services—where small-scale delivery meets large-scale impact, driving your wells towards maximum productivity. View Details

HP-3 Hydraulic Set High Angle 5 1/2" 14-20 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

5" Mech-2 Double Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

G Compression set Retrievable Packer

The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. C-1 Single Grip Invertible Packer The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. View Details

Fiber Optic Splice on Connectors

Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts. View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Cap Lamp All-in-One Toolkit

Empower Your Work with the Wisdom All-in-One Toolkit – A Comprehensive Solution from Provix Provix is proud to present the Wisdom All-in-One Toolkit, a versatile and comprehensive lighting solution tailored for professionals in mining, construction, and other demanding industries. This toolkit is designed to provide everything you need for effective and reliable illumination in various work environments. Complete Set for Varied Lighting Needs The All-in-One Toolkit includes: • A Wisdom 3A or 4A Cap Lamp, offering powerful and adjustable illumination. • A Magnetic USB Wire and Magnetic Connector for easy and secure charging. • Three lenses: Lens #1, Lens #4 (red), and Lens #6, to suit different lighting conditions and preferences. • A Power Supply with a US Plug, ensuring your lamp is always charged and ready to go. • A comfortable Head Strap for hands-free operation. High-Performance Lighting Features With a Panasonic battery of 2*3.5 = 7.0Ah, the cap lamp in this toolkit offers exceptional brightness levels of 1,800 | 12,000 | 25,000 LUX and luminosity of 50 | 265 | 533 LM. It provides long working times of 60 | 13 | 5 hours and impressive lighting ranges of 85 | 219 | 316 meters, ensuring you have the right amount of light for any task. Versatile and User-Friendly Designed for versatility, the All-in-One Toolkit caters to various professional needs, from mining and construction to emergency response and outdoor activities. The different lenses allow for customization of the light beam, enhancing visibility and efficiency in diverse working conditions. Durable and Reliable The toolkit components are built to withstand the rigors of tough working environments. The robust construction of the cap lamp and accessories ensures longevity and reliability, making this toolkit a valuable investment for professionals. Elevate Your Lighting Experience Upgrade your lighting gear with the Wisdom All-in-One Toolkit from Provix. This comprehensive set is your solution for effective, versatile, and dependable lighting in any professional setting. Visit www.provix.net to learn more about this essential toolkit and explore our range of high-quality mining equipment. View Details

Gauge Root Valve – Male x Female – Lagging Extension – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension is designed for controlling and isolating pressure instruments on pipelines where insulation is applied. The lagging extension allows the valve handle to extend above the insulation, ensuring operators can access and operate the valve safely without removing or damaging the insulation. This design maintains the integrity of the insulated pipeline while providing reliable valve operation.

The valve is manufactured to ASME B16.34 standards and meets ISO 9001, PED, and ATEX requirements, ensuring quality and compliance for industrial and oil and gas applications. It is rated for a standard working pressure of 6000 PSI and can be supplied for higher pressures upon request. The temperature range of the valve spans from -50°C to 230°C, with higher temperature options available with graphite sealing. A metal-to-metal body bonnet seal provides high-pressure and high-temperature sealing without the need for O-rings.

The valve features a back-seated stem for added security, a self-centering non-rotating tip for consistent shutoff, and a simple adjustable gland retainer for stable packing. The rolled stem threads and mirror-finished stem through the packing allow smooth operation, reduce packing wear, and provide long-lasting performance. The removable “T” handle and dust cap on the stem further enhance ease of use and protection.

This valve is particularly suitable for applications where pipelines are insulated, allowing for accurate gauge measurement, safe operation, and minimal disruption to insulation.

View Details

Pipe Recovery

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath. View Details

High-Performance 7" Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 7-inch Subsurface Controlled Surface Safety Valve (SCSSSV) is a critical safety device designed to automatically shut in a well if uncontrolled flow occurs due to equipment failure or damage. It is installed in the upper part of the well to quickly isolate the producing zone and prevent uncontrolled release of fluids, ensuring well control in emergency situations.

This valve uses a flapper mechanism and is surface-controlled, meaning it can be operated from the surface. It features a self-equalizing design that reduces pressure differences across the valve during opening and closing, which improves reliability and extends valve life. The sealing surfaces are located outside the flow path when the valve is open, reducing wear and protecting key components from erosion.

Because the valve is wireline retrievable, it can be serviced or repaired without pulling the entire tubing string, minimizing downtime and intervention costs. It fits 7-inch tubing and is available with landing nipple seal bores of 5.750", 5.875", or 5.963". It can handle working pressures up to 10,000 psi and offers valve internal diameters of 3.38" and 3.50", allowing operators to balance safety and flow requirements effectively.

View Details

FRN Wireline Retrievable 5.5 inch Subsurface Safety Valve

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

S-KWIK Control Line and Cable Protector

CSA 36 unit Locking FAST charger rack

Enhance Charging Security and Efficiency with the CSA 36 Unit Locking FAST Charger Rack from Provix Provix is proud to offer the CSA 36 Unit Locking FAST Charger Rack (Part # NWI-NWCR-36BLC), an advanced charging solution designed to cater to the needs of mining, construction, and industrial professionals. This charger rack is an ideal blend of speed, security, and capacity, perfect for medium to large-scale operations. Swift Charging for Continuous Operations The CSA 36 Unit Charger Rack is engineered for quick and efficient charging, reducing downtime to a minimum. It boasts a charging time of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This rapid charging capability ensures your team's equipment is promptly ready for use, enhancing overall productivity. Secure Locking Mechanism for Added Safety With its locking feature, the CSA 36 Unit Charger Rack provides an extra layer of security, safeguarding your valuable equipment during charging. This is especially crucial in environments where the risk of theft or tampering is a concern. The locking mechanism ensures that the equipment remains secure, offering peace of mind and improved safety in the workplace. Space-Efficient Design for Organized Workspaces Despite its capacity to charge 36 units, this charger rack is designed with space efficiency in mind. Its compact form factor makes it an excellent fit for equipment rooms and charging stations where space is at a premium, helping maintain an organized and clutter-free environment. Durable Construction for Industrial Environments Built to withstand the harsh conditions typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust construction ensures it can endure daily wear and tear, offering long-term, dependable performance. Ideal for Varied Operational Needs Whether you’re managing a mining operation, a construction site, or an industrial facility, the CSA 36 Unit Locking FAST Charger Rack is an excellent choice. It accommodates a considerable number of units, making it suitable for operations that require efficient and secure charging solutions. Upgrade Your Charging Setup with Provix Invest in the Wisdom CSA 36 Unit Locking FAST Charger Rack to streamline your charging processes and enhance the security of your equipment. Visit Provix at www.provix.net to learn more about this high-capacity, secure charging solution and explore our range of specialized mining equipment. View Details

Isolation Packer HP-2 Hydraulic Set 5 1/2" Packer 13-20 PPF

The Ballycatter WC-HP-2 Isolation Packer is a hydraulic-set, single-string tandem packer designed for multiple-zone well completions.

Its primary function is to act as the upper packer in a stacked packer system, working in conjunction with a lower hydraulic retrievable packer to create a sealed isolation zone between them.

This allows for selective treatment, injection, or production within specific well intervals. Additionally, the WC-HP-2 packer can be used toseal off casing holes or perforations, providing an effective solution for low-pressure well applications.

View Details

2” Tubing End Locator

The 2” Tubing End Locator is a mechanical downhole tool used to determine the physical end of production tubing during well intervention or maintenance activities. It is a critical component in operations where it is necessary to confirm tubing length or avoid tool deployment beyond the tubing’s bottom, such as during setting packers, logging, or fishing operations.

In a typical well setup, production tubing does not always terminate at a predictable or recorded depth. The tubing end locator provides a reliable way to identify the true end of the tubing string by using a spring-loaded finger mechanism that reacts upon reaching the tubing’s bottom. This reaction is detectable at the surface, providing the operator with a clear and immediate indication without relying solely on depth readings or assumptions.

This specific model is intended for tubing sizes ranging from 2" to 2-1/2" outer diameter. It is designed with a maximum tool O.D. of 1.750", which ensures clearance inside the tubing, and includes a 1.375" fishing neck, a standardized feature that allows the tool to be retrieved if necessary using conventional pulling tools.

Threading is provided on both ends for integration into tool strings: a 15/16 - 10 UN pin connection on top and a 1 - 11.1/2 NPT box connection at the bottom. This allows the locator to be run inline with other mechanical or wireline-conveyed tools. These standard thread forms ensure compatibility with widely used downhole equipment and deployment systems.

Constructed from high-strength alloy steel, the tool is designed to withstand the mechanical stress, temperature variations, and chemical exposure typical in oil and gas well environments. While not a pressure-control device, its materials and design are selected to perform reliably under downhole pressure conditions encountered during standard intervention work.

The 2” Tubing End Locator provides a mechanical means of depth verification that does not rely on electronics, sensors, or depth counters. It is a simple, durable, and effective tool for reducing uncertainty and improving operational safety in the wellbore.

View Details