Don't have an account? Join for free
Cart
5 1/2” SCSSSVs for High-Pressure Well Control
Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.
The 5 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) serves a critical safety function by enabling rapid well shut-in if uncontrolled flow occurs due to equipment malfunction or damage. Positioned in the upper section of the wellbore, this valve acts as a barrier to isolate the production pathway, helping to prevent uncontrolled release of fluids and protect personnel, equipment, and the environment.
Its fail-safe design means that any loss of control pressure or system failure causes the valve to close automatically, ensuring well integrity even in emergency situations. The valve uses a wireline-retrievable flapper mechanism that is surface-controlled, allowing operators to maintain or replace key components without pulling the tubing string—significantly reducing downtime and operational costs.
Engineered for wells utilizing 5 1/2" (139.70 mm) tubing, this valve fits landing nipples with a 4.562” seal bore and supports working pressures up to 5,000 psi. The internal valve diameter of 2.38” is designed to balance flow efficiency and tool passage capability. Additionally, by positioning the sealing surfaces outside the flow path when open, the valve minimizes wear caused by erosive fluids, enhancing durability and service life.
This SCSSSV provides a reliable, maintainable solution for well control in demanding operational environments, combining robust construction with practical features to support continuous production and rapid emergency response.
View Details
The Monoflange Single Body Double Block and Bleed Valve combines two isolation points and a vent in a single compact body, providing safe and reliable isolation in oil and gas and process systems. It features a ball isolation mechanism for leak-proof shut-off and a needle drain to safely vent the cavity between the isolation points. This design is particularly suitable for instrument or gauge isolation, chemical injection, sampling, and piping interface applications, where compact size and reduced leak paths are critical.
It's monoflange construction reduces weight, footprint, and the number of potential leak points compared to traditional multi-valve assemblies. The valve accommodates sizes from 1/2” to 2” and pressure classes from 150 to 2500, with both reduced and full bore options to suit different process requirements.
Manufactured from high-quality materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can be supplied with NACE-compliant materials for corrosive environments. All units are designed, tested, and certified in accordance with EEMUA 182, API 6D, ISO 17292, and ASME B16.34 standards and are factory tested to ensure reliable dual isolation and controlled cavity venting.
View Details
LM2500 Wrench for HPT Coupling Nut
The LM2500 Wrench – Horizontal/Vertical HPT Coupling Nut is a specialized maintenance tool designed for the LM2500 gas turbine engine. This wrench is used to install and remove the High Pressure Turbine (HPT) coupling nut, a critical component that secures the HPT rotor to the turbine shaft.
Removing and installing the coupling nut is necessary during major maintenance activities like rotor inspections, repairs, or when replacing key turbine components. Proper removal allows technicians to safely separate the rotor from the shaft, while correct installation ensures the rotor is securely fastened for reliable engine operation.
What makes this wrench stand out is its ability to work with both horizontal and vertical engine positions. This means technicians can use it easily no matter how the engine is set up, making maintenance simpler and more flexible.
Built to precise standards and made from tough materials, the wrench ensures the right amount of force is applied when tightening or loosening the coupling nut. This careful control helps protect the engine’s important parts from damage.
By using this wrench, maintenance teams can complete their work faster and with confidence, reducing downtime and keeping the turbine reliable. It’s an essential tool that supports the smooth operation of the LM2500 engine.
View Details
9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 47-53.5 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.
It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.
Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details
Hex Reducing Nipples Male NPT are pipe fittings designed to connect two female-threaded pipes of different diameters while maintaining a secure and leak-resistant seal. The male tapered threads provide a tight connection that prevents fluid leakage, which is especially important in high-pressure systems.
These fittings are widely used in the oil and gas industry, chemical processing, and instrumentation applications where a reduction in pipe size is required without adding extra joints.
They are manufactured from high-quality materials such as stainless steel, brass, and other compatible alloys, ensuring durability and resistance to corrosion. The fittings are precision-machined from bar stock to provide burr-free internal surfaces for smooth flow and to reduce turbulence within the system. Threads are carefully capped and packed to prevent damage during transit.
Hex Reducing Nipples are rated for pressures up to 10,000 PSI and comply with ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228 standards. They are designed for reliable performance in ambient temperatures from -28 to 37°C (-20 to 100°F) and support efficient installation with standard wrenches thanks to the hex shape, which allows secure tightening. These features make them suitable for high-pressure and instrumentation piping systems where both reliability and traceability are required.
View Details
High Density Fibre cable splicing
Enabling Seamless Connectivity through High-Density Fiber Cable Splicing at Nulux Network Solutions In the interconnected world of the oil and gas industry, where vast swaths of data traverse through networks, orchestrating the symphony of myriad operations, Nulux Network Solutions establishes itself as the maestro, ensuring every note, i.e., data byte, flows seamlessly, securely, and efficiently. The Core of Energy Sector: Data Transmission Navigating through the contemporary oil and gas sector necessitates not just the flow of energy, but the incessant, uninterrupted, and secure transmission of data. Nulux, proffering state-of-the-art products, solutions, and services across the comprehensive energy value chain, takes the lead in facilitating this vital data flow. Our commitment extends beyond providing robust solutions - we forge a pathway toward a more sustainable future, infusing every facet of your operations with technology that ensures your data travels not only with speed but also with uncompromised security. Nulux’s High-Density Fiber Cable Splicing: Where Technology Meets Excellence Fiber optic communication stands out as a linchpin in the modern digital world, especially within the realms of the oil and gas sector. Amidst the vast landscapes, both onshore and offshore, where operations unfold, ensuring that data connects every operational node is pivotal. Here, our High-Density Fiber Cable Splicing service comes to the forefront as a beacon of technological excellence and operational efficacy. Enhanced Connectivity: Our high-density fiber cable splicing ensures that your operations are interlinked with a network that offers enhanced, unfaltering connectivity, even in the most challenging terrains and under stringent conditions. Bandwidth Prowess: Harness the power of expanded bandwidth, facilitating the swift flow of large volumes of data across your operational network, ensuring every decision is backed by real-time data. Robust and Reliable: With a focus on durability and reliability, our fiber cable splicing ensures your network withstands the challenges, providing a robust platform for data transmission. Crafting Futures with Sustainable Data Management In the sprawling domains of the energy sector, where sustainability is progressively becoming a cardinal focus, enabling operations that are not only efficient but also eco-conscious is paramount. Our High-Density Fiber Cable Splicing embodies this principle, ensuring your data management is not only optimal but also leans toward sustainability. Navigating Through the Digital Terrain Together At Nulux, we do not merely offer a service; we extend a partnership. A partnership wherein your aspirations for operational efficiency, data security, and sustainable practices are realized through our technological solutions. Our High-Density Fiber Cable Splicing is more than a service – it is a commitment to ensuring your data flows through a network that is as steadfast, secure, and efficient as the operations it facilitates. Conclusion In a world where data permeates every operational stratum, ensuring it flows through a network that epitomizes reliability, security, and efficiency is crucial. Navigate the intricate digital landscapes of the oil and gas industry with Nulux, where your data is transmitted through networks forged from technological excellence and a commitment to sustainability. Join hands with Nulux Network Solutions, and let’s traverse through the digital journey towards a sustainable, data-driven future together. Because at Nulux, your data is not merely transmitted; it is cared for, safeguarded, and facilitated through a network where every byte is crucial in crafting a sustainable future. Let's illuminate the path towards a robust, interconnected, and sustainable operational future, together. View Details
Safety Valve for Water Injectors 5.71 inch
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details
The Gauge Root Valve Male x Female with Lagging Extension is designed for controlling and isolating pressure instruments on pipelines where insulation is applied. The lagging extension allows the valve handle to extend above the insulation, ensuring operators can access and operate the valve safely without removing or damaging the insulation. This design maintains the integrity of the insulated pipeline while providing reliable valve operation.
The valve is manufactured to ASME B16.34 standards and meets ISO 9001, PED, and ATEX requirements, ensuring quality and compliance for industrial and oil and gas applications. It is rated for a standard working pressure of 6000 PSI and can be supplied for higher pressures upon request. The temperature range of the valve spans from -50°C to 230°C, with higher temperature options available with graphite sealing. A metal-to-metal body bonnet seal provides high-pressure and high-temperature sealing without the need for O-rings.
The valve features a back-seated stem for added security, a self-centering non-rotating tip for consistent shutoff, and a simple adjustable gland retainer for stable packing. The rolled stem threads and mirror-finished stem through the packing allow smooth operation, reduce packing wear, and provide long-lasting performance. The removable “T” handle and dust cap on the stem further enhance ease of use and protection.
This valve is particularly suitable for applications where pipelines are insulated, allowing for accurate gauge measurement, safe operation, and minimal disruption to insulation.
View Details
The Ballycatter 9 5/8” Feedthrough Packer is a robust hydraulic-set packer built for large-bore completions in 9 5/8” casing. Designed for high-volume production and injection applications, this packer features bi-directional barrel slips that anchor it against pressure fluctuations and tubing movement, ensuring stability and well integrity.
The pass-through cable section enables a secure electrical connection to below, maintaining operational efficiency in high-flow rate wellbores. Its durable single-mandrel construction and Acner Array Packing Element provide exceptional resistance to high temperatures and corrosive environments, making it an ideal choice for challenging downhole conditions.
The 9 5/8” Feed-Thru Packer is set hydraulically by applying tubing pressure against a plugging device, mechanically locking the slips and sealing elements in place. Its dual-grip anchoring system enhances stability, making it particularly suited for large-bore completions with significant tubing expansion and contraction forces.
The straight pull retrieval mechanism allows for efficient removal and reduced intervention costs, ensuring minimal downtime and operational efficiency. Compatible with all major cable pack-off systems, this packer provides high-performance isolation and superior sealing integrity in large-diameter wells.
View Details
This 2-way panel-mounted ball valve with male x female connections is designed to control, start, or stop fluid flow in oil and gas piping systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or process bypasses.
The male x female connections allow secure inline installation and easy integration into existing piping without requiring additional fittings. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves need centralized access or where physical access to the pipeline is limited.
The valve features a floating ball design for leak-proof shut-off under high-pressure conditions. Operation is simple with a quarter-turn handle that provides fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Factory testing ensures seat and stem integrity, and the valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments.
View Details
5 1/2" Mech-1 Single Grip Mechanical Set Packer for 13-15.5 PPF Casing
Ballycatter Mech-1 Single Grip Mechanical Packer
Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”
The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.
Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.
The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.
View Details
In oil and gas well operations, the 2 ½” Tubing End Locator plays a critical role in confirming the exact depth at which production tubing terminates within the wellbore. Accurately identifying the tubing endpoint is essential during various well intervention activities, including maintenance, workovers, and the installation or retrieval of downhole tools and equipment.
During operations such as setting packers, deploying plugs, running logging tools, or performing fishing jobs to recover stuck equipment, precise knowledge of tubing length ensures that tools are positioned correctly. This prevents accidental over-pumping or tool deployment beyond the tubing into the open hole section of the well, where damage to equipment or tool loss can occur.
The 2 ½” Tubing End Locator is designed specifically to fit tubing with an outer diameter of approximately 2 ½ inches. It features a compact maximum outside diameter of around 1.750 inches, allowing it to pass easily within the tubing without causing obstruction. The tool employs a spring-loaded finger mechanism that activates mechanically upon reaching the tubing bottom. This signal does not rely on electronic sensors or depth measurement devices, making the tool highly reliable even in harsh downhole environments where electronics may be compromised by pressure, temperature, or fluid conditions.
Standardized threaded connections on the tool—typically a 15/16 - 10 UN pin on the top and a 1 - 11 1/2 NPT box on the bottom—enable it to be seamlessly integrated into a wide range of intervention toolstrings. These common connection types ensure compatibility with existing downhole equipment and facilitate quick assembly and deployment.
Manufactured from high-strength alloy steel or similar materials, the tubing end locator is built to withstand typical downhole conditions, including high pressure, elevated temperatures, and corrosive fluids commonly found in oil and gas wells. Its purely mechanical design minimizes maintenance requirements and reduces the risk of failure compared to electronic alternatives.
This tool is particularly valuable in wells where tubing length may have changed due to wear, repairs, or previous interventions, offering an essential measure of control and confidence in complex well environments.
View Details
The Ball Valve Lever Operated 3-Way Female × Female Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows flow to be directed between multiple pipelines, making it ideal for applications such as flow diversion, sampling lines, injection systems, or process line bypasses.
The valve supports split flow and is suitable for pressures up to 6000 PSI (maximum 10000 PSI on request) and temperatures from –40 °F to 450 °F (–40 °C to 232 °C).
The female × female connections enable secure inline installation without the need for male fittings, simplifying assembly and reducing potential leak points. The valve features a floating ball design for seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions.
It is manufactured and tested to ASME B16.34 standards, pressure-temperature rated to ASME B31.3, and type-tested to MSS-SP-99, providing verified performance and reliability in industrial environments.
Operation is efficient and reliable with a quarter-turn lever, allowing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, while replaceable seats and packings extend service life. Fire-safe designs and optional compliance with NACE MR0175 standards are available, and heat code traceability ensures material verification.
Built for demanding industrial environments, the valve is suitable for a wide range of oil and gas applications where flow control, diversion, and durability are critical.
View Details
Remote Operated Vehicle (ROV) Training Courses
Dive into the Depths: Introducing Subsea ROV Training Courses We believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise The instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact us today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration! View Details
Solar Panel capable of providing power to typical industrial monitoring and control systems
A solar panel, or solar module, is one component of a photovoltaic system. They are constructed out of a series of photovoltaic cells arranged into a panel. They come in a variety of rectangular shapes and are installed in combination to generate electricity. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect. View Details
5" HP-6 Hydraulic Set High Angle Production Packer for 15-18 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details
Injection Well Subsurface Safety Valve WI 4.89
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details
Fiber Optic Mechanical Connectors
Navigating Optimal Connectivity with Nulux’s Fiber Optic Mechanical Connectors The Oil and Gas industry is no stranger to the integral role that secure, precise, and reliable connectivity plays in ensuring the smooth execution of its multifaceted operations. Amidst the sprawling expanse of pipes, rigs, and refineries lies a nexus of data, flowing incessantly, safeguarding operational integrity, and facilitating momentous decisions. In the paradigm of fostering such impeccable connectivity, Nulux Network Solutions introduces its exemplary service of deploying Fiber Optic Mechanical Connectors. Connecting More Than Just Fibers A fiber optic connector, though small in stature, plays a monumental role in ensuring that the lifeblood of your operations – your data – traverses through the network with utmost precision and minimal loss. Positioned meticulously at the end of a line, a fiber optic connector becomes the gateway through which connectivity to network devices or other fiber connectors in a patch panel is realized. Mechanical fiber connectors stand as sentinels, guarding the alignment of the cores of fibers, ensuring that the passage of light – and thus your data – is uninterrupted and lossless. The efficacy of these connectors is such that, when adeptly installed, they concede incredibly minimal light due to reflection or misalignment of the fibers. A Panorama of Possibilities with Mechanical Connectors Navigating through the approximately 100 different types of fiber optic connectors that have graced the market, Nulux remains undeterred and proficient in ensuring the selection and installation of the most apt connectors to meet your specific operational needs. Why Nulux’s Fiber Optic Mechanical Connectors? Spectrum-Wide Expertise: Offering products, solutions, and services that span across the entire energy value chain, Nulux’s offerings are not merely solutions but a steadfast commitment to ensuring your operations are perpetually connected and sustainable. Tailored Connectivity Solutions: Every operation in the oil and gas sector is uniquely nuanced. Nulux prides itself on delivering custom, tailored solutions, ensuring that your fiber optic connectors are not just installed but are perfectly aligned with your operational needs. Navigating Towards Sustainability: Our engagement with our customers extends beyond providing solutions. We stand alongside you, steering towards a more sustainable future, ensuring that every connector, every fiber, and every byte of data propels us towards a future that’s not just connected but also environmentally conscious. Lighting the Pathway of Data: Mechanical connectors from Nulux assure that the luminal path your data treads is secure, reliable, and optimal, ensuring that every bit of information reaches its destination as intended. Your Data’s Journey, Secured with Nulux In the nexus of your operations, where data flows with the same criticality as the oil traversing through your pipelines, Nulux Network Solutions stands as a guardian, ensuring that every byte of data reaches its destination securely, reliably, and optimally. Explore with Nulux, the realms of impeccable connectivity, safeguarding your operations with our Fiber Optic Mechanical Connectors, and let’s forge ahead, crafting a future where every connection propels us towards sustainability and operational excellence. Empower your network, ensure your connectivity, and enlighten your future with Nulux. View Details
Long Stroke Hydraulic Pumping Unit
In the last few years, thanks to intense engineering studies, Sivam has designed and manufactured the Long Stroke Hydraulic Pumping Unit to maximize the efficient recovery of oil from wells completed with sucker rods. One of the main advantages of the Long Stroke Hydraulic Pumping Unit compared to a conventional Beam Pump is the longer stroke length results in less pump cycles per barrel resulting in higher pump efficiency and less wear and tear on the downhole components. Installation of the Long Stroke Hydraulic Pumping Unit is quick and simple. Installation averages just 3 hours and civil work is not required. The light weight of the unit (under 3 tonnes) and small footprint (it is mounted on the X-mas Tree) provides a artificial lift pumping unit that can be used in well testing or offshore platform applications (dual barrier policy can be achieved when used in conjunction with our rod sentinel SCSSSV). View Details
Refinery capacity available for long term contracts in multiple geographic locations
Construction timelines for a modular refinery can range from 12 to 18 months from the start of a project to the first barrel of oil processed. It is time and cost efficient to utilise space in existing refining and storage facilities. View Details
Tank Truck for fluid hauling including potable water
Tank Trucks are used to transport a variety of liquids, such as chemicals, liquids, gases, beverages and dry goods, such as grain. Given the expensive and complex nature of tank truck equipment, the specialized skillset required of our drivers, and the increased regulatory environment facing, tank truck carriers deal with the challenges of all trucking companies and many which are unique to the tanker industry. Tank Trucks haul hazardous products, such as petroleum products, chemicals, gases, and hazardous wastes. They also haul non-hazardous materials such as bulk foods and dry bulk products such as cement. View Details
10 3/4" Mech-2 Double Grip Mechanical Set Packer
Ballycatter Mech-2 Double Grip Mechanical Packer
Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”
The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.
The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.
The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.
With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.
View Details
Lock Mandrels for Landing Nipples
Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry. View Details
AV Annulus Safety Valve 9-5/8 inch
The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature View Details
The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.
The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.
These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.
This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.
View Details
Check Valve Poppet Type – Male x Female 1/2" NPT – 6000 PSI – ISO 9001
The 1/2" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism provides fast response and a positive seal under pressure, protecting pipelines, pumps, and equipment from reverse flow and pressure fluctuations.
The 1/2" size is suitable for medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required. Male × female connections enable secure inline installation and integration into existing piping systems without additional fittings, reducing potential leak points and simplifying system layout.
The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adaptation to system requirements. Construction materials include corrosion-resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.
All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures quality and material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.
View Details
Check Valve Poppet Type – Male x Female 1/4" NPT – 6000 PSI – ISO 9001
The 1/4" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet design provides fast response and reliable sealing under pressure, ensuring protection of pipelines, pumps, and other critical equipment from damage caused by reverse flow or pressure fluctuations.
The 1/4" size is ideal for small diameter lines, instrumentation, sampling, or control applications where space is limited and precise flow control is required. Male × female connections allow secure inline installation and integration into existing piping without the need for additional fittings, reducing potential leak points and simplifying system layout.
Factory tested for cracking and reseal performance, the valve has a standard working pressure of 6000 psi, with optional ratings up to 10000 PSI. It offers selectable cracking pressures from 1/3 to 25 psi, making it adaptable to various flow requirements. The valve is available in corrosion resistant materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, suitable for demanding oil and gas environments. Heat code traceability ensures quality and material verification, and additional testing options including vibration, temperature, and helium testing are available for critical applications.
View Details
Water Injection Safety Valve Type MC 5-1/2 inch
MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details
Pressure and Temperature Memory Gauge Service
Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust. View Details
6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 28-32 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.
It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.
Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details
R-3 Double Grip Retrievable Packer
The R-3™ packer is a versatile production packer intended for a broad range of production applications. It is a compression-set packer, suitable for stimulation and treating applications in a double-grip configuration. Applications in which excessive bottomhole pressures have been depleted, a single-grip version can be used as an economical production packer. The R-3 single-grip retrievable-casing packer is set with one-fourth-turn right-hand rotation and can be released with straight pickup. We can source from current stock or direct from the manufacturer. View Details
OilHungry oil absorbent big pad
Oil absorbent pads are designed to selectively absorb oil-based liquids while repelling water. They are commonly used in various industries, including automotive, marine, and manufacturing, to clean up and control oil spills or leaks. These pads are crucial for preventing environmental contamination and ensuring workplace safety. The size of oil absorbent pads can vary, and this specific product, Oil Absorbent big pad 22" x 23", is designed with dimensions of 22 inches by 23 inches. This size is suitable for addressing larger spills or leaks. It works very well and easy, when oil leaks occur, simply place the absorbent pad in the affected area to efficiently clean up and contain the spilled oil. And After use, follow proper disposal guidelines, on the packaging. The primary purpose of OilHungry Oil Absorbent pad is to effectively clean up oil spills. Whether it's a minor leak or a more substantial oil spill in an engine, the absorbent pad is designed to capture and contain the oil, preventing it from spreading further. Leaking oil can happen with every boat or vessel. And oil leaks pose a significant threat to the environment. The absorbent pad helps mitigate this threat by quickly and efficiently absorbing the leaked oil. This proactive approach protects water bodies, preventing the oil from contaminating rivers, lakes, or oceans. Having an Oil Absorbent big pad (22" x 23) is a valuable tool to address and solve challenges related to leaks in engines. the absorbent pad offers a targeted and effective solution for managing oil spills in various industrial and marine settings. Having the Oil Absorbent big pad prepared in your boat, is the same as having a plan for unexpected leaks. View Details
7" HP-6 Hydraulic Set High Angle Production Packer for 20-26 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.
It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.
Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details