The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

The 2″ Gas Metering Valve is designed to precisely control the flow of gas fuel in aero-derivative gas turbines, including the LM2500. By adjusting fuel delivery based on operating conditions, it maintains the optimal fuel-to-air ratio essential for safe, efficient, and reliable turbine operation.

Fuel metering valves act as the throttle control for gas turbines. Since turbines generate power by burning fuel mixed with compressed air, accurate regulation of this mixture directly impacts power output, efficiency, and emissions such as nitrogen oxides (NOx) and carbon monoxide (CO).

This valve delivers exceptional accuracy within ±1% of the flow point, ensuring consistent fuel delivery and optimal combustion. It is built to perform reliably in demanding environments and meets safety standards including ATEX, PED, and UL, certifying it for use in hazardous and extreme conditions.

The fuel metering valve is a two-inch right-angle style valve commonly used on aero-derivative turbines. It integrates easily into existing systems without requiring hydraulic or electrical changes. With millions of hours of proven field performance, it offers dependable, precise fuel control that enhances turbine efficiency and reduces fuel consumption.

The LM2500 DLE Gas Turbine is an advanced power generation unit designed to deliver high efficiency while significantly reducing emissions. Utilizing cutting-edge Dry Low Emissions (DLE) technology, it precisely controls fuel and air mixing to minimize nitrogen oxide (NOx) emissions.

The LM2500 DLE utilizes a single-rotor gas generator with a 16-stage compressor and a two-stage high-pressure turbine, coupled with cutting-edge DLE combustion technology to reduce nitrogen oxide emissions. It supports dual-fuel operation on a wide variety of fuels, including natural gas, diesel, aviation fuel, LPG, and even hydrogen blends with concentrations ranging from 5% to 95%. The turbine’s open configuration allows for faster maintenance and quicker engine replacement, minimizing downtime.

Its key benefit is utilizing advanced aeroderivative gas turbine technology with dual-fuel Dry Low Emissions (DLE) capability, achieving ultra-low emissions of just 15 ppm NOx on gas fuel, combined with broad fuel flexibility—making it ideal for meeting strict environmental regulations while providing fast, reliable power for dynamic grid demands.

The Single Annular Combustor (SAC) version of the LM2500+G4 is designed for oil and gas applications that prioritize consistent performance, fuel flexibility, and emissions control—such as LNG facilities, gas processing plants, and pipeline compression, both onshore and offshore.

What makes the SAC version different is its simpler combustor design compared to dual annular or premix types. The SAC uses a through-flow, venturi swirler to ensure an even temperature profile at the turbine inlet, helping extend hot section life. It features individually replaceable fuel nozzles, a durable machined-ring liner, and a thermal barrier coating for better resistance to high temperatures and corrosion. This design supports both dry operation (with higher emissions) and water or steam injection to reduce NOx when needed—making it adaptable to site-specific emission regulations.

The LM2500+G4 SAC builds on the proven LM2500+ design, with approximately 10% more power. This gain comes from increased airflow, improved internal cooling, and material upgrades—while keeping the same number of compressor and turbine stages. The 17-stage high-pressure axial compressor and the basic engine layout remain unchanged, making it easy to maintain and service.

The engine can run on a wide range of liquid and gas fuels, allowing flexibility in remote or supply-constrained locations. It achieves up to 40% thermal efficiency in simple cycle mode. Water-injected operation enables NOx emissions as low as 25 ppm (gas) and 42 ppm (liquid).

In short, the LM2500+G4 SAC is well-suited for high-power mechanical drive and power generation in harsh or remote oil and gas environments, offering a balance of power output, fuel versatility, and emissions control.

The 4″ butterfly bleed air valve plays a crucial role in controlling the flow of compressed air, called bleed air, from the compressor section of a gas turbine. This airflow regulation helps maintain safe and efficient turbine operation by managing pressure and protecting internal components.

This valve is built with a strong bearing shaft and specially designed bearings that handle frequent cycles, ensuring a longer service life and less maintenance. It includes a fail-safe feature that automatically opens the valve if a problem occurs, protecting the turbine from damage. With a quick response time—fully opening or closing in less than 320 milliseconds—it reacts fast to changing engine conditions. The valve’s electric components are also better insulated from heat, improving reliability even in harsh environments.

What makes the 4″ valve stand out is its ideal size and performance. It offers greater airflow than smaller valves, yet remains compact and easier to fit than larger ones, making it perfect for medium-duty applications where space and precise control are important.

Importantly, this valve is designed as a direct, plug-and-play replacement for existing models. It requires no changes to the hydraulic or electrical systems, allowing for quick upgrades without downtime. This seamless fit and reliable operation help ensure your gas turbine runs smoothly and efficiently, reducing costs and increasing uptime.

The LM2500+ DLE gas turbine is designed to provide reliable, efficient while meeting strict environmental rules. Ideal for power plants where emissions limits and water availability are critical concerns, the LM2500+ DLE provides clean, flexible, and high-performance power generation.

Using advanced Dry Low Emissions (DLE) technology, it reduces nitrogen oxide (NOx) and carbon monoxide (CO) emissions without requiring water or steam injection. This makes it especially valuable for facilities aiming to minimize environmental impact and avoid the operational complexity and maintenance costs associated with water-based emissions control systems.

The turbine’s ability to maintain NOx emissions below 25 ppm on natural gas—and as low as 15 ppm under certain conditions—ensures compliance with tough air quality standards.

With a power output exceeding 31 megawatts and thermal efficiency above 40%, the LM2500+ DLE suits a broad range of applications, from utility-scale electricity generation to industrial cogeneration and offshore power. Its fast start capability and robust cycling performance enable it to respond quickly to fluctuating grid demands, making it an excellent partner for integrating renewable energy sources.

Fuel flexibility extends the LM2500+ DLE’s usability across different operational contexts. It runs smoothly on natural gas, diesel, aviation fuels, and even hydrogen blends—offering operators confidence and versatility regardless of fuel availability or market conditions.

Maintenance is simplified thanks to the turbine’s modular design, allowing rapid access and part replacement. This reduces downtime and keeps plants running efficiently, enhancing overall productivity.

Combining power, efficiency, emissions control, and fuel flexibility, the LM2500+ DLE supports effective and compliant power generation in a variety of operational settings.

LM2500 Fixture, Hinge – Upper Compressor Case is a specialized tool set designed to safely raise and hinge open the upper compressor case of the LM2500 gas turbine engine. This fixture is essential during major maintenance, inspection, or overhaul activities where access to the engine’s internal compressor components is required.

The fixture allows maintenance teams to lift and securely hold the heavy upper compressor case in a hinged, open position. This provides stable and safe access to the compressor rotor and other internal parts, ensuring technicians can carry out detailed inspections or repairs without risking damage to sensitive components.

Made from strong, durable materials, the fixture set is built to support the heavy upper compressor case while keeping everything properly aligned. Its reliable locking and hinge system holds the case securely in place, helping protect the gas turbine.

Compatible with both OEM and MRO procedures, this fixture supports efficient, repeatable maintenance practices and helps reduce overall engine downtime. Whether used in the field or in a dedicated maintenance facility, the LM2500 Hinge Fixture is a critical tool for safe and effective servicing of the LM2500 engine’s compressor section.

The Bearing, Roller, Cylindrical No. 6R is a precision-engineered component used in LM2500 aero-derivative gas turbines commonly employed in the oil and gas sector. Installed at the No. 6R position, this cylindrical roller bearing supports the turbine’s rotor shaft by carrying radial loads and maintaining accurate shaft alignment during high-speed operation.

Its specialized roller design allows it to withstand intense mechanical stresses and thermal changes typical in demanding oil and gas environments. By reducing vibration and ensuring smooth rotation, the bearing contributes to stable and efficient turbine performance, which is critical for continuous operation in upstream, midstream, and downstream applications.

The No. 6R bearing’s role in maintaining precise shaft positioning supports the overall durability and reliability of LM2500 turbines used in gas compression, power generation, and offshore platforms, making it a key element in sustaining safe and efficient operations within the oil and gas industry.