Ballycatter.ca - Industrial Equipment

Electric Submersible Pump (ESP) systems for oil and geothermal applications

The electrical submersible pump is an efficient and reliable artificial-lift method for lifting moderate to high volumes of fluids from wellbores with volumes rates from 150 B/D to as much as 150,000 B/D (24 to 24,600 m3/d). A complete ESP system can be designed and supplied to meet the requirements from individual wells. The ESP system is comprised of; intake, pump, motor, seal section, cable, feed-through, surface electrical and any sensors, software and variable frequency drives (VFD's). ESP's can be used onshore, offshore, subsea, or in relatively high gas saturations. View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

7 inch Tubing Hanger

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required. View Details

LM2500+G4 SAC Gas Turbine

The Single Annular Combustor (SAC) version of the LM2500+G4 is designed for oil and gas applications that prioritize consistent performance, fuel flexibility, and emissions control—such as LNG facilities, gas processing plants, and pipeline compression, both onshore and offshore.

What makes the SAC version different is its simpler combustor design compared to dual annular or premix types. The SAC uses a through-flow, venturi swirler to ensure an even temperature profile at the turbine inlet, helping extend hot section life. It features individually replaceable fuel nozzles, a durable machined-ring liner, and a thermal barrier coating for better resistance to high temperatures and corrosion. This design supports both dry operation (with higher emissions) and water or steam injection to reduce NOx when needed—making it adaptable to site-specific emission regulations.

The LM2500+G4 SAC builds on the proven LM2500+ design, with approximately 10% more power. This gain comes from increased airflow, improved internal cooling, and material upgrades—while keeping the same number of compressor and turbine stages. The 17-stage high-pressure axial compressor and the basic engine layout remain unchanged, making it easy to maintain and service.

The engine can run on a wide range of liquid and gas fuels, allowing flexibility in remote or supply-constrained locations. It achieves up to 40% thermal efficiency in simple cycle mode. Water-injected operation enables NOx emissions as low as 25 ppm (gas) and 42 ppm (liquid).

In short, the LM2500+G4 SAC is well-suited for high-power mechanical drive and power generation in harsh or remote oil and gas environments, offering a balance of power output, fuel versatility, and emissions control.

View Details

Gauge Root Valve – Female x Female – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Female x Female connection is designed to control and isolate pressure instruments in process systems, particularly in oil and gas applications. It is rated for a standard working pressure of 6000 PSI, with the option for higher pressures upon request.

The valve is type-tested to MSS-SP-99 and designed according to ASME B16.34 for pressure-temperature ratings, ensuring reliable performance under demanding conditions.

The valve features a metal-to-metal body and bonnet seal, providing high-pressure and temperature sealing without the need for O-rings. It can operate in temperatures from -50°C to 230°C, with graphite sealing available for applications up to 500°C. The stem has a backseat for added security, and a self-centering, non-rotating tip ensures consistent shutoff and leak-free performance.

The packing is located below the stem threads, isolating the threads from process media, and the gland retainer is easily adjustable for maximum packing stability. The valve includes a removable T-handle for low-torque operation and a dust cap to prevent contamination. All valves are factory-tested with nitrogen at 1000 PSI to verify seat and packing leakage, with a maximum allowable leak rate of 0.1 sec/min.

Materials can be supplied to meet NACE MR 01-75 standards, and heat code traceability is provided. Additional tests, including vibration, temperature, and helium, are available on request. This design ensures long-lasting, reliable operation while protecting connected instruments and maintaining safety in high-pressure systems.

View Details

Flange of various sizes and specifications for use in industrial environments

Flange connections are one of the best options for pipe end connections that have bends that are subjected to very high lateral forces inclined to cause the loosening of the assembly. Flanges are used instead of welded connections to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently). Upgrading threaded connections to flanged connections increases reliability and integrity while maintaining operational flexibility. View Details

Pup Joints for Completions

Oilfield pup joints are short sections of pipe that are used to connect longer sections of pipe in the oil and gas industry. View Details

Dump Bailer Service

InWaTec Combined: Enhancing Well Intervention with Precision Dump Bailer Services In the world of well intervention, precision and reliability are paramount. InWaTec Combined is proud to introduce our Dump Bailer services—a cost-effective and efficient solution for transporting fluids to precise points within the wellbore. These services are essential for various applications, ensuring that operations are not only successful but also streamlined for maximum efficiency. Strategic Applications for Optimal Results Our Dump Bailer services are versatile, serving a range of critical applications: Cementing Operations: Deploying cement onto permanent plugs to secure well integrity is executed with precision, ensuring that the cement is placed exactly where it is needed. Acidizing: We specialize in depositing acid precisely at scale restrictions or on flow control items, which may be scaled up to restore functionality and enhance flow. These strategic applications are vital in extending the life of wells and restoring their optimal functionality. Features & Benefits: A Blend of Simplicity and Efficiency InWaTec Combined’s Dump Bailers are designed with the industry's needs in mind, and they come with a host of features and benefits: Standard Slickline Connections: Our dump bailers are equipped with industry-standard connections, ensuring compatibility with a wide range of toolstrings and ease of integration. Simple, Robust Design: Durability and ease of use are at the heart of our design philosophy, providing a tool that withstands the rigors of well operations while being user-friendly. Quick and Easy Field Redress: Time is of the essence in well operations, and our dump bailers are designed for rapid redress in the field, minimizing downtime. Modular Design Flexibility: We understand that well conditions vary, which is why we offer modular designs that allow for field changeable variations in length to suit any well's requirements. Customizable Burst Discs: With the ability to supply various burst discs, we tailor our tools to suit every unique application, ensuring that the operation is conducted with the right specifications for optimal results. Cost-Effectiveness: Our Dump Bailer services provide a cost-effective method for fluid transport within the wellbore, ensuring that budgetary constraints do not compromise well servicing operations. A Partner in Well Intervention At InWaTec Combined, we stand as your partner in well intervention. Our Dump Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Precision Fluid Deployment with InWaTec Combined In summary, InWaTec Combined's Dump Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, ease of use, and cost-effectiveness, we ensure that your well intervention operations are performed with the highest standards of accuracy and efficiency. Choose InWaTec Combined for services that deliver where it counts—down the wellbore. View Details

5" Mech-2 Double Grip Mechanical Set Packer for 15-18 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

LM2500 DLE Gas Turbine

The LM2500 DLE Gas Turbine is an advanced power generation unit designed to deliver high efficiency while significantly reducing emissions. Utilizing cutting-edge Dry Low Emissions (DLE) technology, it precisely controls fuel and air mixing to minimize nitrogen oxide (NOx) emissions.

The LM2500 DLE utilizes a single-rotor gas generator with a 16-stage compressor and a two-stage high-pressure turbine, coupled with cutting-edge DLE combustion technology to reduce nitrogen oxide emissions. It supports dual-fuel operation on a wide variety of fuels, including natural gas, diesel, aviation fuel, LPG, and even hydrogen blends with concentrations ranging from 5% to 95%. The turbine’s open configuration allows for faster maintenance and quicker engine replacement, minimizing downtime.

Its key benefit is utilizing advanced aeroderivative gas turbine technology with dual-fuel Dry Low Emissions (DLE) capability, achieving ultra-low emissions of just 15 ppm NOx on gas fuel, combined with broad fuel flexibility—making it ideal for meeting strict environmental regulations while providing fast, reliable power for dynamic grid demands.

View Details

NWB-30 Charger

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30. View Details

3 1/16" Coiled Tubing Hanger 10M Pressure Rated

Coiled tubing is a continuous, flexible steel pipe widely used in well intervention and maintenance operations, allowing operators to clean, stimulate, log, or deploy tools inside the wellbore without shutting down production. This capability makes coiled tubing an efficient and cost-effective solution to maintain well health and improve productivity.

The 3 1/16” 10M Coiled Tubing Hanger is designed to support larger diameter coiled tubing and heavier tool strings required for more demanding or deeper well operations. The size “3 1/16”” refers to the wellhead bore size that the hanger fits into, while the “10M” indicates its pressure rating of 10,000 psi, meaning it is built to withstand high-pressure environments typically found in advanced well interventions.

This hanger is rated to maintain pressure containment during interventions in high-pressure wells, ensuring safe operations and protecting well integrity. It accommodates coiled tubing sizes ranging from 1 inch up to 1¾ inches outer diameter, which allows the deployment of heavier and more complex downhole tools needed for challenging well conditions. Its rugged construction is engineered to withstand mechanical stresses from heavy tool strings and high pressures without compromising performance.

Designed with flanged connections compatible with API 6B and 6BX standards, the hanger integrates seamlessly with existing wellhead equipment, simplifying installation and maintenance. An important feature of this model is the wireline entry sub, which guides wireline tools into the tubing bore, facilitating additional intervention tasks. The wireline entry sub also provides a secondary annulus seal that prevents fluid or gas leaks and restricts any upward movement of the tubing, enhancing operational safety.

The hanger maintains a secure secondary annulus seal around the tubing, which is critical for isolating pressure zones and protecting against leaks during live well operations. This versatility makes the hanger suitable for various well intervention activities such as well cleanouts, acidizing, logging, and tool deployment, particularly in situations where larger tubing and higher pressures are involved.

The 3 1/16” size strikes a balance between tubing size and wellhead bore capacity. It is larger than smaller hanger sizes, allowing operators to use coiled tubing capable of handling more demanding operational requirements. Its high-pressure rating ensures safe operation in wells where pressures can reach or exceed 10,000 psi, common in deeper or complex reservoirs.

View Details

Seismic Sensors for Subsea

Unveiling the Depths of Earth's Secrets: Seismic Sensors for Subsea Exploration We are dedicated to unlocking the mysteries of the underwater world and empowering the subsea exploration community with cutting-edge technology. Today, we are proud to introduce our latest innovation - Seismic Sensors for Subsea. These advanced sensors are engineered to delve into the very heart of the ocean floor, bringing you invaluable data for seismic analysis and geological studies. Understanding Earth's Subsurface like Never Before Seismic exploration plays a pivotal role in comprehending the Earth's structure and its dynamic processes. Seismic Sensors for Subsea open up a whole new realm of possibilities, enabling you to gain unprecedented insights into the subsea environment. Whether you're involved in offshore oil and gas exploration, scientific research, or environmental monitoring, our sensors are designed to deliver accurate and reliable seismic data. Robust Design for Extreme Environments Operating in the harsh conditions of the subsea realm demands exceptional durability and reliability. Our Seismic Sensors are meticulously designed and built to withstand the pressures of the deep ocean and maintain optimal performance even in challenging environments. The rugged and robust construction ensures that the sensors can endure the rigors of subsea missions and deliver uninterrupted data acquisition. Seamless Integration with ROV Systems Efficiency is key in subsea exploration, and our Seismic Sensors are designed with that in mind. The sensors seamlessly integrate with your existing ROV system, eliminating any compatibility concerns and streamlining your operations. With easy installation and setup, you can swiftly deploy the sensors and start collecting valuable seismic data in no time. High-Precision Data Acquisition Accurate seismic data is crucial for making informed decisions and conducting thorough analyses. The Seismic Sensors are equipped with state-of-the-art technology that ensures precise data acquisition. The sensors capture seismic waves with exceptional clarity, providing you with detailed information about subsurface structures and geological formations. Customized Solutions for Diverse Applications We understand that every subsea exploration project comes with its own set of challenges and requirements. That's why our team of experts works closely with you to tailor the Seismic Sensors to meet your specific needs. Whether you need sensors for deep-sea research or shallow-water surveys, we have the expertise to provide customized solutions that align with your objectives. Pioneering Subsea Innovation As leaders in subsea robotics, we continues to push the boundaries of exploration technology. With our Seismic Sensors for Subsea, we stand at the forefront of innovation, enabling scientists, researchers, and industry professionals to unravel the mysteries of the underwater world like never before. Explore the Depths of Knowledge Take your subsea exploration to new heights with Poseidon Robotics' Seismic Sensors. Discover the vast potential that lies beneath the ocean floor and gain the knowledge you need to make informed decisions in your field of study or industry. Contact Us Today Unleash the power of seismic exploration with Seismic Sensors for Subsea. Contact our team now to explore how our advanced technology can elevate your subsea missions and pave the way for groundbreaking discoveries. With Ballycatter as your partner, the secrets of the deep ocean are within reach. View Details

Mini Hydraulic Power Unit

Empowering Your ROV: Introducing the Mini-HPU (Hydraulic Power Unit) We are committed to pushing the boundaries of subsea exploration and ensuring that your ROV missions are equipped with cutting-edge technology. Our latest innovation, the Mini-HPU (Hydraulic Power Unit), is designed to deliver unmatched power and reliability, elevating the capabilities of your hydraulic manipulators and tools on larger ROVs. Compact Powerhouse Don't let the size fool you! The Mini-HPU may be compact, but it packs a powerful punch. With a robust 3 horsepower output, this little dynamo is built to handle the most demanding subsea tasks with ease. The Mini-HPU provides the muscle you need to operate hydraulic manipulators and tools on larger ROVs effectively. Integrated Efficiency Efficiency is the name of the game, and the Mini-HPU excels in this aspect. Integrated within its sleek design is a convenient 1-gallon reservoir, ensuring an uninterrupted flow of hydraulic fluid to keep your operations running smoothly. No need to worry about external reservoirs, as everything you need is perfectly contained within this powerful unit. Adjustable Pressure Relief and Replaceable Filters We understand the importance of adaptability in your subsea operations. The Mini-HPU features an adjustable pressure relief valve, allowing you to fine-tune the pressure to suit your specific needs. Additionally, we've equipped this hydraulic power unit with easily replaceable filters, ensuring that your system stays clean and optimized for peak performance. Reliability at Its Core We believe in building products that stand the test of time. The Mini-HPU is no exception. Its high reliability fixed displacement pump ensures consistent and dependable performance, allowing you to focus on your mission without worrying about equipment failures. Unleash Your ROV's Potential With a maximum pressure of 2,500 PSI and a maximum flow of 1.6 gallons per minute (standard pump), the Mini-HPU is a formidable force in the subsea realm. It's designed to tackle a wide range of applications, from deep-sea exploration to intricate industrial tasks. Corrosion-Resistant Design The subsea environment can be harsh and unforgiving, but the Mini-HPU is ready for the challenge. Our engineers have crafted the unit with anodized aluminum, providing exceptional corrosion resistance and eliminating the need for additional paint coatings. Your Trusted Subsea Partner The Mini-HPU is a testament to our commitment to delivering advanced solutions that elevate your capabilities and redefine what's possible in the underwater world. Experience the Mini-HPU Difference Ready to take your ROV missions to new depths? Explore the power and versatility of the Mini-HPU and unlock a world of possibilities for your subsea operations. Contact us today and witness the next level of subsea performance with the Mini-HPU by your side. View Details

MS-152 Multistage Steam Turbine

Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Tubing Hanger Coupling - 4 ½” to 2 3/8”

The 4 ½” x 2 3/8” tubing hanger coupling is a specialized downhole component designed to connect two different sizes of upset tubing within a wellhead assembly. Upset tubing refers to tubing that has thicker, reinforced sections at the ends—called “upsets”—which strengthen the threaded connections and help withstand the mechanical stresses and high pressures encountered during well operations. This coupling provides a secure and pressure-tight transition between a larger 4 ½-inch tubing hanger and a smaller 2 3/8-inch production tubing string, enabling effective management of wellbore fluids and maintaining pressure containment.

Engineered to integrate seamlessly with tubing hanger spools, wrap-around tubing hangers (PTHSW), and ‘PTHS’-type tubing spools, this coupling forms part of a modular wellhead completion system. Its union nut design allows installation by screwing the coupling in place without rotating the Christmas tree, simplifying assembly and reducing the risk of damage during installation.

Both the top and bottom ends of the coupling are threaded to customer specifications, offering flexibility for various well configurations and allowing the installation of back pressure valves to maintain well control during operations. Manufactured to API standards and constructed from high-grade materials, the coupling delivers durability and reliable performance in demanding downhole environments characterized by high pressure, temperature, and corrosive fluids.

By facilitating a smooth and strong size transition between different tubing strings, the 4 ½” x 2 3/8” tubing hanger coupling supports well integrity, operational efficiency, and safety throughout oil and gas production.

View Details

ESP Straight Pull 7" HS Packer

The Ballycatter Model WC-ESP Straight Pull 7” Packer is a hydraulic-set production packer built for ESP completions in 7” casing, offering secure wellbore isolation and efficient ESP deployment. Its pass-through section ensures uninterrupted power delivery to the ESP unit, while the bi-directional slips anchor the packer against pressure fluctuations and tubing movement. Designed for high-pressure and high-temperature wells, its single-piece mandrel construction and Acner Array Packing Element provide exceptional durability and sealing reliability.

The WC-ESP Straight Pull 7” Packer is set hydraulically by pressurizing the tubing against a plugging device, locking the packer in place for long-term performance. The straight pull retrieval mechanism enables fast and hassle-free removal, reducing intervention time and operational costs. Compatible with all major cable pack-off or feed-thru devices, this packer is a versatile, high-performance solution for ESP completions in medium-sized casing applications.

View Details

Monoflange DBB Double Block & Bleed Valve – Flange x Thread – Needle Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange DBB Double Block and Bleed Valve with Needle-Needle-Needle configuration is designed to provide dual isolation and safe venting in oil and gas, chemical, and process systems. Both isolation points use needle valves, allowing precise control of flow and pressure in the cavity between the two isolation points, which minimizes leakage and ensures accurate venting. This configuration is particularly suited for instrument and gauge isolation, chemical injection, and sampling applications, where fine control and safety are critical.

The monoflange design integrates the two isolation valves and the bleed into a single compact body. This eliminates the need to bolt together separate valves, reducing the number of joints, potential leak paths, and overall weight, while saving installation space and simplifying maintenance. The valve can accommodate flange sizes from 1/2” to 2” and is rated for Class 150 to Class 2500, making it suitable for a wide range of high-pressure applications.

Manufactured to recognized industry standards including ASME B16.34, API 6D, and ISO 17292, the valve is available in a variety of materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional NACE MR-0-175 compliant materials are available for corrosive environments. In-built vent valves and low emission testing ensure the valve meets stringent safety and environmental requirements, providing a reliable solution for critical fluid control applications.

View Details

Pressure and Temperature Memory Gauge Service

Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust. View Details

3-1/2 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

CSA 120 unit, non-Locking FAST charger rack

Maximize Charging Efficiency with the CSA 120 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to present the CSA 120 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-120BC), a large-scale charging solution designed for operations that demand quick and efficient charging of a high volume of equipment. This charger rack is perfect for extensive mining operations, large construction sites, and industrial settings where time and space are of the essence. High-Capacity, Rapid Charging The CSA 120 Unit Charger Rack is engineered to meet the needs of large teams, offering rapid charging times of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This fast charging capability is crucial for operations where equipment must be ready for continuous use, ensuring minimal downtime and maximum productivity. Designed for Space Efficiency Despite its large capacity, the CSA charger rack is designed to be space-efficient. It’s an ideal solution for organizations that need to manage a significant number of devices but have limited space. This single-sided charger rack can be easily placed in equipment rooms or centralized charging stations, optimizing your workspace. Easy Access and User-Friendly The non-locking feature of this charger rack offers easy and quick access to all charging ports, making it straightforward to manage multiple devices. This design is particularly beneficial in dynamic work environments where quick equipment turnaround is essential. Durable and Reliable for Industrial Use Constructed with durability in mind, the CSA 120 Unit Charger Rack is built to withstand the demanding conditions of mining and industrial environments. Its robust construction ensures it can provide reliable performance over time, making it a smart investment for large-scale operations. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and equipment rental providers who need to charge a substantial number of devices efficiently. Its high capacity and fast charging capabilities make it an indispensable tool for operations of considerable size. Upgrade Your Charging Station Equip your operation with the Wisdom CSA 120 Unit Non-Locking FAST Charger Rack from Provix. Visit our website at www.provix.net to discover more about this high-capacity, efficient charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 20-23 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

HP-1 Hydraulic Set 9 5/8 inch Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Offshore Mini Coil Unit

Navigating Offshore Challenges with InWaTec Combined’s Offshore Mini-Coil Services Offshore oil and gas operations come with a unique set of logistical challenges. In the face of limited deck space and crane capacity, traditional coiled tubing units (CTUs) often fall short in providing the necessary services without compromising operational economics. InWaTec Combined rises to the occasion with our Offshore Mini-Coil Services, designed to deliver efficient, cost-effective well intervention and maintenance solutions in even the most constrained offshore environments. Compact Efficiency: Our capillary/mini-coil CTU is a game-changer for offshore operations. Its compact design minimizes the footprint on the deck, providing a practical alternative to bulkier traditional units. This space-efficient solution is crucial on platforms where every square foot counts. Lift and Load Advantages: The lightweight nature of our Mini-Coil CTU addresses the common challenges of crane limitations. With the reduced load requirements, our Mini-Coil equipment can be easily maneuvered and set up, facilitating a range of well services without the need for heavy lifting equipment. Versatile Applications: Despite its compact size, the Mini-Coil CTU is robust in capabilities. It's adept at a multitude of tasks, from precision interventions like chemical treatments and scale removal to essential maintenance procedures and even wellbore cleanouts. Economic Solution: InWaTec Combined’s Offshore Mini-Coil Services are not just operationally advantageous; they also present significant cost savings. The reduced logistical demands coupled with the efficiency of our Mini-Coil operations translate into a more economical approach to servicing wells offshore. Customized Service Delivery: Understanding that no two wells or offshore platforms are the same, we offer customized Mini-Coil solutions tailored to the specific requirements of each operation. Our team of experts meticulously plans every aspect of the service delivery, ensuring that it aligns perfectly with our clients' operational and economic objectives. At InWaTec Combined, we are committed to innovation and excellence in offshore well services. Our Offshore Mini-Coil Services embody this commitment, providing operators with the assurance that even under the constraints of limited deck space and crane capacity, their wells can be serviced efficiently and effectively. Choose InWaTec Combined for your offshore well interventions, and experience the strategic advantage of our Offshore Mini-Coil Services. We are dedicated to optimizing your operations, ensuring that your offshore wells maintain peak performance with minimal disruption. Let us bring our compact, powerful solutions to your platform, where space is at a premium, but potential is limitless. View Details

Valve Manifolds 2 Valve Manifold R Type – Integral Mount 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The R Type 2 Valve Manifold Integral Mount 1/2” Female NPT is a compact and robust solution for connecting impulse lines directly to pressure transmitters or gauges. It features a simple two-valve arrangement that allows operators to block process pressure, safely bleed trapped pressure, and calibrate transmitters without the need for additional piping. This configuration ensures quick and efficient maintenance and reduces potential leak points.

Its integral mount design allows the manifold to be attached directly to the transmitter, eliminating the need for extra brackets or complex assemblies. This not only saves space but also provides a secure and stable connection, which is particularly useful in oil and gas applications where reliability under high-pressure conditions is critical.

The manifold is constructed with a metal-to-metal body and bonnet seal to handle pressures up to 6000 PSI, with higher pressure options available upon request. It is fully factory tested for seat and packing leakage, and materials can be supplied to meet NACE MR 01 75 standards. The R Type is suitable for a wide temperature range and is designed to provide smooth operation, long-term durability, and leak-free performance even in demanding field conditions.

View Details

Thru-Tubing MatrixStixx 2.25 inch

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success! View Details

Packer Setting

Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time. View Details

Warehouse Dolly

Are you tired of searching for the perfect ESP stand for the inspection and maintenance of your electric submersible pumps? Look no further than Sivam! We specialize in providing high-quality ESP stands that are specifically designed to meet the needs of your team. Our ESP stands are built using only the highest quality materials, ensuring exceptional durability and reliability. At Sivam, we understand the importance of precision and accuracy in the maintenance of critical equipment like ESP's, which is why our stands are designed to provide a stable and secure platform for teardown and inspection. We know that convenience and ease of use are important factors when it comes to selecting an ESP stand, which is why we offer adjustable height options to ensure a level working surface. Our stands are also equipped with a range of additional features to help your team work more efficiently, so you can get the job done quickly and effectively. At Sivam, we pride ourselves on providing exceptional customer service. We work closely with our clients to understand their specific needs and design benches that meet their exact specifications. Our commitment to quality and customer satisfaction is unmatched, so you can trust us to deliver the best products and services for your business. Choose Sivam for all your ESP stand needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right! View Details

Cranes of various sizes and ratings for onshore lifting and placement

Mobile cranes can be used to access narrow passages and navigate project sites that have limited space, making them a practical solution for many industries, site conditions, and materials. Let us help manage your crane and material handling requirements for your project. View Details

LM2500+G4 DLE U PT Gas Turbine

The LM2500+G4 DLE U PT is a versatile gas turbine designed for a wide range of applications, including onshore and offshore power generation, gas pipeline compression, and LNG compression. It features Dry Low Emissions (DLE) technology, which reduces nitrogen oxide (NOx) emissions to as low as 25 parts per million by volume (ppmv) at 15% oxygen, meeting stringent environmental standards.

In the oil and gas industry, production rates are closely linked to available horsepower. The LM2500+G4 DLE U PT offers higher power output, high reliability, and a lower initial cost per kilowatt, making it a cost-effective solution for energy-intensive operations.

This turbine has proven its capability to operate reliably in extreme ambient conditions, with running data demonstrating performance at temperatures as low as -50°F and start-up capability down to -40°F. This wide operational temperature range ensures dependable service in harsh environments.

Fuel flexibility is a key strength of the LM2500+G4 DLE U PT. It can seamlessly switch between various fuels—lean treated natural gas, rich offshore gas, propane, or diesel—without shutting down or losing efficiency. This flexibility supports energy security, allowing continuous operation even if the natural gas supply is interrupted. Additionally, the turbine can be adapted to burn alternative fuels like bioethanol and naphtha, further enhancing fuel options.

A notable advantage of aeroderivative gas turbines like the LM2500+G4 DLE U PT is their ability to operate on hydrogen blends, which produce no carbon emissions when combusted. Both new turbines and existing units can be converted for high hydrogen fuel use, supporting decarbonization goals.

Moreover, the LM2500+G4 DLE U PT is truly dual-fuel capable, able to switch from 100% natural gas to 100% propane without the need for pilot fuels. This contrasts with dual-fuel reciprocating engines, which typically require about 5% diesel during gas operation, increasing costs and emissions. The LM2500+G4 DLE U PT’s fuel flexibility, emission controls, and robust design make it a reliable and efficient choice for demanding mechanical drive and power generation needs in the oil and gas sector.

View Details

Alternative Energy Solutions

Unlocking Profitable Alternative Energy Solutions: Mobile, Reliable, and Environmentally Responsible Lovat Gas Solutions is your trusted partner in developing profitable alternative energy solutions. We understand the importance of coordinating a dedicated team of experts and resources to deliver innovative, mobile, reliable, and environmentally responsible solutions that assist our clients and partners in their transition to new energy paradigms. With a key focus on safety, we are committed to helping you achieve your energy goals while maximizing profitability. Why choose Lovat Gas Solutions for your alternative energy needs? 1. Coordinated Expertise: Our team of skilled professionals brings together expertise from various disciplines to provide a comprehensive approach to alternative energy solutions. We coordinate the efforts of our talented individuals and resources to ensure seamless execution and deliver high-quality results. 2. Mobile Solutions: We recognize the importance of mobility in the ever-evolving energy landscape. Lovat Gas Solutions offers mobile energy solutions that can be easily deployed and adapted to your specific requirements. Whether it's mobile power generation, off-grid solutions, or energy storage, we have the flexibility to meet your needs. 3. Reliability: We understand that reliability is a critical factor in the success of your alternative energy projects. Our commitment to delivering reliable solutions is ingrained in every aspect of our work. You can rely on our expertise and experience to provide solutions that consistently meet your energy demands. 4. Environmental Responsibility: At Lovat Gas Solutions, we prioritize environmental responsibility in all our endeavors. Our alternative energy solutions are designed to minimise carbon emissions, reduce environmental impact, and contribute to a sustainable future. We take pride in helping our clients transition to cleaner energy sources with a focus on sustainability. Partner with Lovat Gas Solutions to unlock profitable alternative energy solutions. We are dedicated to understanding your unique energy needs, designing innovative solutions, and delivering tangible results. Whether you require short-term solutions or long-term strategies, our team is here to support your transition to new energy frontiers. Contact us today to discuss your alternative energy goals. Let our experienced team guide you through the process, providing you with mobile, reliable, innovative, and environmentally responsible solutions that drive profitability and contribute to a greener future. Trust Lovat Gas Solutions to be your partner in successful alternative energy initiatives. View Details

Ultra-Sonic Inspection Tool (USIT) runs

Advancing Well Integrity with InWaTec Combined’s Ultra-Sonic Inspection Tool Services In the pursuit of operational excellence within the oil and gas industry, maintaining the integrity of well infrastructure is paramount. InWaTec Combined is proud to present our Ultra-Sonic Inspection Tool (USIT) Services, a cutting-edge solution for comprehensive cement evaluation, casing inspection, and integrity assessment. The USIT is a marvel of diagnostic precision, utilizing a single transducer mounted on an Ultrasonic Rotating Sub (USRS) at the tool's base. This sophisticated apparatus emits ultrasonic pulses ranging from 200 to 700 kHz, meticulously recording the waveforms reflected from both internal and external casing interfaces. The decay rate of these waveforms is a direct indicator of the cement bond's quality, while the resonant frequency readings of the casing yield accurate wall thickness measurements—critical data for assessing pipe integrity. Thanks to the transducer's placement on the rotating sub, our USIT Services ensure a full 360° scan of the casing circumference, leaving no aspect of the wellbore unexamined. This comprehensive coverage is pivotal for evaluating cement bond quality and determining the condition of the casing with unmatched precision. Our tool’s high angular and vertical resolutions can detect even the narrowest channels, down to 1.2 inches in width, providing a detailed assessment of well integrity. Our real-time data acquisition and analysis at the wellsite generate self-explanatory maps and valuable metrics, including cement bond logs, casing thickness, internal and external radii. These insights are indispensable for: Cement evaluation to ensure zonal isolation and well integrity. Casing inspection to ascertain ongoing wellbore stability. Corrosion detection and monitoring to prevent potential well failures. Identification of internal and external damage or deformation, safeguarding against unexpected operational hazards. Casing thickness analysis, crucial for calculating collapse and burst pressure parameters and prolonging the life of the well. InWaTec Combined's USIT Services are not just diagnostic tools—they are a testament to our commitment to safeguarding our clients' assets and optimizing well performance. By embracing our Ultra-Sonic Inspection Tool Services, operators gain the assurance that their wells remain robust, compliant, and productive throughout their lifecycle. In an industry where well integrity is synonymous with operational success, InWaTec Combined stands as your sentinel of safety and efficiency. Deploy our USIT Services, and harness the power of precision ultrasonic technology to illuminate the unseen, ensuring your operations are secure from the inside out. View Details

Industrial Ethernet

Industrial Ethernet Solutions by Nulux Network Solutions: Unifying Robust Connectivity in the Oil and Gas Sector Navigating the robust yet intricate world of the oil and gas industry necessitates a network that can not merely withstand the test of operational rigours but can effortlessly blend reliability with performance. At the heart of ensuring such seamless communications and data transfer within your intricate operational frameworks rests Industrial Ethernet, and at the helm of delivering exemplary Ethernet solutions is Nulux Network Solutions. A Beacon in the Industrial Networking Landscape: Nulux Network Solutions In a sector that doesn’t afford the luxury of pauses, your network must not merely be a conduit for communication, but a fortress of secure, unwavering, and efficient data transfers. For over two decades, Nulux has been a pivotal part of countless industrial projects across North America, offering a spectrum of networking solutions, with a notable proficiency in Industrial Ethernet solutions, among others. Our seasoned team, embodying a meticulous and perfectionist ethos, not only installs, maintains, and troubleshoots copper cabling systems including ethernet but elevates the quality of workmanship, sculpting solutions that are resilient, reliable, and tailor-fitted to your unique operational needs. The Quintessence of Copper in Your Industrial Ethernet Framework Ensuring that your business thrives in the dynamic arena of energy extraction and refinement, Nulux provides a well-rounded, comprehensive copper network design, maintenance, and upgrade solution, harnessing the intrinsic virtues of copper: Unbridled Data Transmission: Safeguarding data transfers up to 10 Gbps, ensuring your operations are never bottlenecked by data transfer delays. Unwavering Reliability: Guaranteeing a network that stands undeterred amidst operational demands. Affordability & Ease: Merging cost-effectiveness with simple installation and termination procedures. Nulux's Industrial Ethernet: Solidifying Your Operational Backbone As technology continues to weave itself into every fabric of the industry, industrial Ethernet by Nulux stands as a testament to a network solution that is flexible yet fiercely durable and reliable. Our service ambit encapsulates: Pioneering Network Designs: That dovetail impeccably with your existing and prospective operational frameworks. Constant Network Evolution: Ensuring your networks are perpetually contemporaneous, mitigating obsolescence. Bespoke Solutions: Tailoring our services to precisely cater to your unique data, voice, and video service requirements. Your Operations, Backed by Nulux’s Industrial Ethernet Expertise In a sector where every byte of data, every communication, and every connection can be pivotal, Nulux ensures that your operations are perpetually enveloped in a cocoon of sturdy, reliable, and efficient network infrastructure. Our Industrial Ethernet solutions, fortified by the proven reliability of structured cabling and our unwavering commitment to impeccable service delivery, stand as a silent, steadfast guardian of your operations, facilitating operational continuity and data integrity. Allow Nulux Network Solutions to become the architects of your network infrastructure, ensuring that while you navigate through the operational complexities of the oil and gas sector, your data travels through a network that is as resilient, reliable, and robust as your operations demand. Contact Nulux Network Solutions today, and let’s sculpt a future where your network is the least of your concerns, ensuring your focus remains undeterred – on operational excellence and industry leadership. View Details

Check Valve Poppet Type – Tube Ends 1/4" NPT – 6000 PSI – ISO 9001

The Check Valve Poppet Type with 1/4" NPT tube ends is a compact, high-performance valve designed to provide reliable one-way flow control in hydraulic and pneumatic systems. Built for demanding applications, this valve is rated up to 6000 PSI working pressure, making it suitable for both high-pressure and industrial environments.

The poppet design ensures a tight seal when backflow occurs, preventing fluid from moving in the reverse direction while allowing free flow in the intended direction. This not only protects sensitive system components but also maintains system efficiency by eliminating leakage.

With a cracking pressure typically available from 1 to 25 psi, the valve can be selected to suit specific operational needs, ensuring smooth opening without unnecessary resistance. The female NPT tube end connection provides a secure, leak-free fit, compatible with a wide range of standard piping and tubing systems. Constructed from durable stainless steel or carbon steel depending on configuration, the valve offers excellent resistance to wear, corrosion, and high-pressure fatigue.

Commonly used in oil and gas, the poppet-type check valve provides consistent performance, low maintenance requirements, and long service life.

Its simple yet effective design ensures operators can trust it in critical applications where preventing reverse flow is essential for safety and operational reliability.

View Details

Wireline Conveyed Perforating

Precision in Every Shot: InWaTec Combined’s E-line Wireline Conveyed Perforating Services InWaTec Combined is at the vanguard of well perforation technology, offering sophisticated E-line Wireline Conveyed Perforating Services that stand as a testament to our commitment to operational excellence and innovation. In the realm of well completion and stimulation, the strategic deployment of perforating guns is crucial, and the use of wireline—or electric line—has been the traditional and preferred method for this critical operation. The rationale behind the enduring preference for wireline-perforated wells is multifaceted: Real-Time Depth Control: With wireline, our experts can ensure that perforations are placed precisely where they need to be, optimizing the flow of hydrocarbons and enhancing well productivity. Selective Perforation: The ability to select specific zones for perforation is a significant advantage, especially in complex reservoirs with multiple pay zones. Reduced Logistics: Compared to tubing deployment, wireline operations require less equipment on site, translating into a leaner, more cost-effective operation. Historically, wireline perforating guns were classified based on their application relative to the completion process—whether as casing guns used before the completion is run, or as through-tubing guns utilized through the completion. However, the landscape has evolved. Today, InWaTec Combined harnesses the flexibility of wireline to run any type of engineered perforating system, alongside a broad spectrum of explosive devices, tailored to the bespoke needs of each well. At InWaTec Combined, our E-line Wireline Conveyed Perforating Services are not a one-size-fits-all solution. We recognize that each well is unique, with its own set of geological, technical, and operational considerations. Therefore, we offer customized perforating strategies that maximize well potential and align with our clients' production objectives. Our arsenal of wireline-conveyed perforating tools includes the latest in shaped-charge technology, ensuring clean and deep perforations for optimal reservoir connectivity. With these advanced tools at our disposal, we can overcome the challenges presented by any well environment, whether requiring high shot density, deep penetration, or specific orientation. Choosing InWaTec Combined for your wireline conveyed perforating needs means opting for a partner who prioritizes precision, efficiency, and safety. Our services are designed to minimize the time between perforation and production, ensuring that your operations transition smoothly and swiftly to the production phase. Trust InWaTec Combined to deliver wireline conveyed perforating services that are not just about making holes—they're about opening pathways to prosperity. Let us bring our precision-perforating expertise to your wellsite, and together, we'll unlock the full potential of your reservoirs. View Details

Hydraulic Control Line for SCSSSV

Control lines are assembled on reels filled with fluid and pressure tested. Reel spools are designed so pressure can be applied at any time during running to check control-line integrity. Hydraulic control lines are made from two different manufacturing processes that conform to ASTM specifications: (1) seamless and (2) welded and sunk. Seamless Tubing is fabricated from a solid rod. The process involves forcing a mandrel or punch through the solid rod to form a tube. The continuous lengths available from this process are limited. Welded and Sunk Tubing is fabricated from flat stock. The process involves rolling the stock into a cylinder and welding the seam. Once in tube form, it is drawn through a die to achieve the proper OD. This process is considerably less costly than the seamless method and yields lines available in continuous lengths with no butt-welded connections. Optional single and dual lines with protective encapsulation are available. The encapsulated material is suitable for use in most annular fluids. Encapsulation protects lines from damage during installation and simplifies the running process. The dual-encapsulated line can be used with “balanced” SCSSVs or injection wells where multiple lines are required. As an option, a protective cable between two control lines is available. Single-encapsulated lines have no cable; however, a protective cable on either side of the control line can be ordered. Installation Control lines are attached to subsurface controls with appropriate tube fitting and pressure tested before running into the wellbore. Line spools are hung in the derrick, and control line is paid out as tubing is run. Applications » For SCSSVs Features » Different lengths of control line in continuous coil » Stainless and alloy 825 materials offered » Control lines offered in various encapsulated options » All control lines conform to ASTM specifications » Lines available in other sizes on request *information sourced from manufacturer View Details

Premier Production Packer with Striker

The Premier™ Packer with Striker™ interventionless packer setting system is a proven product for interventionless actuation of the Premier packer. It is the new class of “removable” packers designed for wells that demand the sealing performance of a permanent packer and the flexible workover options of a traditional retrievable packer. Because the Premier can be remotely actuated, rig time/cost is reduced and risks associated with standard well intervention setting methods, are minimized. This results in a cost-savings benefit for the operator. The Striker system is a device that generates packer setting force from hydrostatic well pressure. As a secondary or contingent setting method, it can also be set by hydraulic pressure. The Striker modular design is a derivation of the innovative and successful SB- 3H™ hydrostatic/hydraulic retainer production packer. It can be removed on the production string by cutting the mandrel with a chemical or mechanical cutting tool. The Premier system offers unique high-performance and multiple-removal options for high-cost intervention completions. We can source from current stock or direct from the manufacturer. View Details

5" Mech-2 Double Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Wireline Drift

Maximize Well Integrity and Performance with HOCA Oil Tools' Tubing Drifts In the complex and demanding environment of oil and gas extraction, ensuring the integrity and functionality of downhole tubing is paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance the safety, efficiency, and productivity of your operations. Our Tubing Drifts stand out as a testament to our commitment to quality and precision in downhole slick line tools. HOCA’s Tubing Drifts: Precision Engineered for Optimal Performance Tubing Drifts are essential tools designed to ensure the clear passage within downhole tubing, preventing costly blockages and ensuring the smooth operation of subsequent downhole tools and processes. Made from high-quality materials and engineered to meet rigorous industry standards, HOCA Oil Tools’ Tubing Drifts are designed to provide accurate measurements and clearances, ensuring your tubing is free from obstructions and ready for operation. Experience the HOCA Difference in Downhole Operations At HOCA Oil Tools, our mission is to provide the oil and gas industry with downhole tools that exceed industry standards and meet the complex demands of modern drilling and extraction processes. Our Tubing Drifts embody this mission, offering precision, reliability, and efficiency to enhance your downhole operations. Incorporating HOCA’s Tubing Drifts into your downhole tool inventory signifies a step towards optimized well maintenance, enhanced safety, and increased operational efficiency. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your success with innovative solutions and expert service. Choose HOCA Oil Tools’ Tubing Drifts for your downhole operations and join the ranks of satisfied customers who trust our tools to maintain the highest standards of well integrity and performance. Elevate your downhole operations with HOCA Oil Tools – where quality meets innovation. View Details

ESP Straight Pull 7" Packer

The Ballycatter Model WC-ESP Straight Pull 7” Packer is a hydraulic-set production packer built for ESP completions in 7” casing, offering secure wellbore isolation and efficient ESP deployment. Its pass-through section ensures uninterrupted power delivery to the ESP unit, while the bi-directional slips anchor the packer against pressure fluctuations and tubing movement. Designed for high-pressure and high-temperature wells, its single-piece mandrel construction and Acner Array Packing Element provide exceptional durability and sealing reliability.

The WC-ESP Straight Pull 7” Packer is set hydraulically by pressurizing the tubing against a plugging device, locking the packer in place for long-term performance. The straight pull retrieval mechanism enables fast and hassle-free removal, reducing intervention time and operational costs. Compatible with all major cable pack-off or feed-thru devices, this packer is a versatile, high-performance solution for ESP completions in medium-sized casing applications.

View Details

Double Insulated AWG 2/0 Cable

Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. View Details

CSA 36 unit Locking FAST charger rack

Enhance Charging Security and Efficiency with the CSA 36 Unit Locking FAST Charger Rack from Provix Provix is proud to offer the CSA 36 Unit Locking FAST Charger Rack (Part # NWI-NWCR-36BLC), an advanced charging solution designed to cater to the needs of mining, construction, and industrial professionals. This charger rack is an ideal blend of speed, security, and capacity, perfect for medium to large-scale operations. Swift Charging for Continuous Operations The CSA 36 Unit Charger Rack is engineered for quick and efficient charging, reducing downtime to a minimum. It boasts a charging time of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This rapid charging capability ensures your team's equipment is promptly ready for use, enhancing overall productivity. Secure Locking Mechanism for Added Safety With its locking feature, the CSA 36 Unit Charger Rack provides an extra layer of security, safeguarding your valuable equipment during charging. This is especially crucial in environments where the risk of theft or tampering is a concern. The locking mechanism ensures that the equipment remains secure, offering peace of mind and improved safety in the workplace. Space-Efficient Design for Organized Workspaces Despite its capacity to charge 36 units, this charger rack is designed with space efficiency in mind. Its compact form factor makes it an excellent fit for equipment rooms and charging stations where space is at a premium, helping maintain an organized and clutter-free environment. Durable Construction for Industrial Environments Built to withstand the harsh conditions typical of mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust construction ensures it can endure daily wear and tear, offering long-term, dependable performance. Ideal for Varied Operational Needs Whether you’re managing a mining operation, a construction site, or an industrial facility, the CSA 36 Unit Locking FAST Charger Rack is an excellent choice. It accommodates a considerable number of units, making it suitable for operations that require efficient and secure charging solutions. Upgrade Your Charging Setup with Provix Invest in the Wisdom CSA 36 Unit Locking FAST Charger Rack to streamline your charging processes and enhance the security of your equipment. Visit Provix at www.provix.net to learn more about this high-capacity, secure charging solution and explore our range of specialized mining equipment. View Details

Custom buoyancy options for color, depth rating, and covering area

Unleashing the Power of Custom Buoyancy Units for Subsea Robotics We are driven by a passion for innovation and a commitment to empowering the subsea exploration industry. Today, we are thrilled to introduce our latest breakthrough - Custom Buoyancy Units. These state-of-the-art buoyancy solutions are designed to enhance the performance and versatility of your subsea robotics, delivering unparalleled control and efficiency in every underwater mission. Tailored to Your Needs: Custom Buoyancy Options We understand that no two subsea missions are the same, and that's why our Custom Buoyancy Units offer a world of possibilities to cater to your specific requirements. From the color and depth rating to the covering area, you have the flexibility to customize every aspect of the buoyancy units, ensuring they align perfectly with your operational needs. Color Customization for Enhanced Visibility In the challenging depths of the ocean, visibility is paramount. Our Custom Buoyancy Units can be tailored in vibrant colors to improve visibility and tracking during underwater operations. Whether you need to differentiate between multiple ROVs in the water or simply want to enhance visual identification, our color options offer the solution you need. Optimal Depth Rating for Any Mission Every subsea mission comes with unique depth challenges. With our Custom Buoyancy Units, you have the power to choose the optimal depth rating that suits your specific application. From shallow-water surveys to deep-sea explorations, our buoyancy solutions are engineered to withstand the pressures of varying depths, ensuring your ROVs perform at their best. Covering Area: Precision Engineering for Stability Stability is crucial in subsea operations, and our Custom Buoyancy Units are meticulously designed to provide the perfect covering area for your ROVs. Through precision engineering and advanced materials, we offer buoyancy units that maintain the ideal balance between buoyancy and stability, resulting in smoother and more controlled underwater movements. Redefining Subsea Robotics As pioneers in subsea robotics, we continues to push the boundaries of innovation. With our Custom Buoyancy Units, we are reshaping the future of underwater exploration. By putting the power of customization in your hands, we enable you to unlock the full potential of your ROVs and achieve new heights in subsea missions. Unleash Your ROV's Potential Discover the limitless possibilities that await your subsea robotics with Custom Buoyancy Units. Elevate your underwater operations, optimize your ROV's performance, and gain an edge in your field with our cutting-edge buoyancy solutions. Contact Us Today Take the first step towards transforming your subsea missions with Custom Buoyancy Units. Our team of experts is ready to assist you in tailoring the perfect buoyancy solution for your unique needs. Embrace the power of customization and embark on a new era of subsea exploration with Ballycatter as your trusted partner. Contact us today to unlock the true potential of your subsea robotics. View Details

Rod Sentinel - Rod Pump SCSSV

Introducing the Rod Sentinel. Sivam has designed and patented the first fail safe, surface controlled subsurface safety valve for sucker rod application called rod sentinel - an innovative technology that changes the game in dual barrier policy of the oil and gas market. This Sivam safety valve can be applied in all sucker rod completed wells where it is necessary to comply with the dual barrier policy. The Rod Sentinel SCSSSV can be installed in landing nipple for 2.81 inches surface controlled wireline retrievable insert valves with standard profiles. The Rod Sentinel SCSSSV lock mandrel has been designed to be installed and retrieved by the sucker rod string in combination with the pump plunger so it completely avoids the cost and risk of a workover. The beam pump safety valve was designed in compliance with the fail-safe concept. Control line pressure keeps the valve open and when the pressure fails the preloaded power spring in the valve pushes the sealing pads within the cone housing and the valve closes using the same hydraulic control line technology as a conventional SCSSSV. View Details

Enviro-Syn HCR-2000N

Introducing Enviro-Syn HCR, the environmentally responsible HCl acid replacement product line that is changing the game. Say goodbye to hazardous exposure and corrosive properties without sacrificing performance. With Enviro-Syn HCR, you can use it in any situation where HCL is normally used, but without the risks and precautions, both personally and for your equipment. BMS Development - Fluid Enviro-Syn HCR2000N Modified Acid (North Sea approved/WGK-1) is the latest addition to this product line. This yellow-classified, safer alternative to 15% Hydrochloric acid is North Sea approved and can be used in a range of applications at temperatures up to 900 C. From spearhead acid to scale treatment, HCR-2000N is compatible with formation oils and fluids and requires less additives than typical 15% HCl blends. HCR-2000N is also very versatile and is supplied as a concentrate, which is typically diluted to a 20% to 90% concentration at the well site (platform) with seawater, produced or fresh water. Its comprehensive spending nature ensures that it is non-corrosive to skin tissue (OECD 404) and has low fuming and metal corrosion properties. Enviro-Syn HCR is the perfect solution for those who want to make the switch to more sustainable and environmentally-friendly practices. And with HCR-2000N, you can have peace of mind knowing that you're using a North Sea approved product that has a readily biodegradable nature in seawater (OECD 306) and can solubilize 225 kg/m3 of CaCO3. Make the switch today and experience the benefits of Enviro-Syn HCR. View Details

Gauge Root Valve – Male x Female – Lagging Extension – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension is designed for controlling and isolating pressure instruments on pipelines where insulation is applied. The lagging extension allows the valve handle to extend above the insulation, ensuring operators can access and operate the valve safely without removing or damaging the insulation. This design maintains the integrity of the insulated pipeline while providing reliable valve operation.

The valve is manufactured to ASME B16.34 standards and meets ISO 9001, PED, and ATEX requirements, ensuring quality and compliance for industrial and oil and gas applications. It is rated for a standard working pressure of 6000 PSI and can be supplied for higher pressures upon request. The temperature range of the valve spans from -50°C to 230°C, with higher temperature options available with graphite sealing. A metal-to-metal body bonnet seal provides high-pressure and high-temperature sealing without the need for O-rings.

The valve features a back-seated stem for added security, a self-centering non-rotating tip for consistent shutoff, and a simple adjustable gland retainer for stable packing. The rolled stem threads and mirror-finished stem through the packing allow smooth operation, reduce packing wear, and provide long-lasting performance. The removable “T” handle and dust cap on the stem further enhance ease of use and protection.

This valve is particularly suitable for applications where pipelines are insulated, allowing for accurate gauge measurement, safe operation, and minimal disruption to insulation.

View Details