Don't have an account? Join for free
Cart
Dump Truck for industrial construction projects
There are many different types of dump trucks available including; Standard Dump Truck, Tri-Axle Dump Truck, Superdump Truck, Truck & Transfer, Dump Trailer, Semi-End Dump Truck, Side Dump Truck, Bottom Dump, Belly Dump, Double Bottom, Double Belly Dump. From hauling material to removing demolition waste, these dump trucks help sites effectively create a clear workspace for any project. View Details
LM2500XPRESS+G5 DLE UPT Gas Turbine
The LM2500XPRESS+G5 DLE UPT is a modular aeroderivative gas turbine system built for fast, flexible, and efficient power generation in both onshore and offshore environments. It is particularly well-suited for applications across LNG facilities, gas pipelines, gas processing plants, and general power generation, including electricity production at both 50 and 60 Hz, without the need for a speed reducer.
The "+G5" designation refers to its fifth-generation power turbine, offering the highest output and efficiency in the 20–40 MW class. It supports both high-speed and low-speed power turbine configurations, allowing integration into a variety of grid or mechanical drive systems.
At its core, the G5 includes a high-pressure compressor derived from the LM2500+G4, now redesigned for longer service life. In a simple cycle, it achieves up to 41% efficiency, which is notable for a turbine of this size class. The system can start from cold and reach load in about five minutes, making it ideal for rapid-response applications.
The unit is built for speed and simplicity. It’s shipped in preassembled modules, with a compact footprint that helps reduce installation time.
The Dry Low Emissions (DLE) system supports environmental compliance without requiring water or steam injection, simplifying operations and reducing resource demands.
Altogether, the LM2500XPRESS+G5 DLE UPT provides a practical solution for projects that need reliable, fast, and efficient power without a complex setup.
View Details
9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 47-53.5 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.
It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.
Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details
Tubing Hanger Coupling - 4 ½” to 2 7/8”
The 4 ½ x 2 7/8” Tubing Hanger Coupling is a specialized connection component used in oil and gas wellhead systems to join two different sizes of upset tubing—4 ½-inch and 2 7/8-inch. This size combination is commonly selected when there is a need to transition from a wider tubing hanger profile to a smaller production string, without significantly restricting flow or compromising mechanical strength. The slightly larger 2 7/8” production tubing allows for greater internal flow area than smaller alternatives, making this configuration well-suited for completions that aim to support moderate to high production rates.
The coupling is designed with a union nut mechanism, which enables installation without rotating the Christmas tree or disturbing other surface equipment. This simplifies operations, especially in space-limited or sensitive surface environments. Both the top and bottom threads of the coupling can be manufactured to meet specific customer requirements, ensuring compatibility with a range of tubing string designs. Additionally, the coupling is threaded to accommodate a back pressure valve, offering an important safety feature by allowing well pressure to be managed during maintenance or pressure control procedures.
Constructed from high-grade steel and compliant with API standards, the 4 ½ x 2 7/8” Tubing Hanger Coupling offers high durability, corrosion resistance, and the mechanical integrity required for challenging downhole conditions. By supporting a secure, pressure-tight connection between tubing sizes, it plays a key role in maintaining well integrity and operational efficiency in various oil and gas production scenarios.
View Details
Subsurface Safety Valve for Injection Wells 5.4 inch
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details
The LM2500 DLE Gas Turbine is an advanced power generation unit designed to deliver high efficiency while significantly reducing emissions. Utilizing cutting-edge Dry Low Emissions (DLE) technology, it precisely controls fuel and air mixing to minimize nitrogen oxide (NOx) emissions.
The LM2500 DLE utilizes a single-rotor gas generator with a 16-stage compressor and a two-stage high-pressure turbine, coupled with cutting-edge DLE combustion technology to reduce nitrogen oxide emissions. It supports dual-fuel operation on a wide variety of fuels, including natural gas, diesel, aviation fuel, LPG, and even hydrogen blends with concentrations ranging from 5% to 95%. The turbine’s open configuration allows for faster maintenance and quicker engine replacement, minimizing downtime.
Its key benefit is utilizing advanced aeroderivative gas turbine technology with dual-fuel Dry Low Emissions (DLE) capability, achieving ultra-low emissions of just 15 ppm NOx on gas fuel, combined with broad fuel flexibility—making it ideal for meeting strict environmental regulations while providing fast, reliable power for dynamic grid demands.
View Details
Isolation Packer HP-2 Hydraulic Set 5 1/2" Packer 13-20 PPF
The Ballycatter WC-HP-2 Isolation Packer is a hydraulic-set, single-string tandem packer designed for multiple-zone well completions.
Its primary function is to act as the upper packer in a stacked packer system, working in conjunction with a lower hydraulic retrievable packer to create a sealed isolation zone between them.
This allows for selective treatment, injection, or production within specific well intervals. Additionally, the WC-HP-2 packer can be used toseal off casing holes or perforations, providing an effective solution for low-pressure well applications.
View Details
6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.
It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.
Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details
The 2″ Gas Metering Valve is designed to precisely control the flow of gas fuel in aero-derivative gas turbines, including the LM2500. By adjusting fuel delivery based on operating conditions, it maintains the optimal fuel-to-air ratio essential for safe, efficient, and reliable turbine operation.
Fuel metering valves act as the throttle control for gas turbines. Since turbines generate power by burning fuel mixed with compressed air, accurate regulation of this mixture directly impacts power output, efficiency, and emissions such as nitrogen oxides (NOx) and carbon monoxide (CO).
This valve delivers exceptional accuracy within ±1% of the flow point, ensuring consistent fuel delivery and optimal combustion. It is built to perform reliably in demanding environments and meets safety standards including ATEX, PED, and UL, certifying it for use in hazardous and extreme conditions.
The fuel metering valve is a two-inch right-angle style valve commonly used on aero-derivative turbines. It integrates easily into existing systems without requiring hydraulic or electrical changes. With millions of hours of proven field performance, it offers dependable, precise fuel control that enhances turbine efficiency and reduces fuel consumption.
View Details
Wrenches for professional maintenance of industrial equipment
A wrench ensures the workability of the object so that it continues to work as fast and effectively as before. It is basically used to provide a strong grip; it is also known as a spanner. Using a wrench is extremely easy. A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt. View Details
Hex Body Needle Valves Female x Female are precision valves designed for accurate flow control and isolation in piping systems. The hexagonal body allows for easy installation and secure tightening using a standard wrench. Both ends have female threads, enabling direct connection to male-threaded pipes or fittings without additional adapters.
These valves are suitable for high-pressure and high-temperature applications, with a standard working pressure of 6000 psi and temperature ratings from -50°C to 230°C, extendable up to 500°C with graphite. They are commonly used in oil and gas, instrumentation, and process control systems to regulate fluid or gas flow, perform system bleed operations, or isolate sections of a pipeline.
The valves feature a metal-to-metal body and bonnet seal for durability, a self-centering non-rotating stem tip for consistent shutoff, and packing located below the threads to prevent process media from reaching the threads. Factory-tested for seat and packing leakage, these valves provide reliable, leak-free performance in demanding environments.
View Details
WI Water Injection Valve 1.75 inch
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details
The Tube Fittings Male Elbow NPT is a mechanical fitting that provides a 90° connection between tubing and components with National Pipe Taper (NPT) threads. It is designed for use in high-pressure systems with operating pressures up to 6000 PSI.
The elbow configuration allows tubing runs to change direction while maintaining a sealed joint. Threads are tapered in accordance with NPT standards to create a pressure-tight seal when properly installed.
These fittings are produced in a range of sizes from 1/4” to 1” and are manufactured in line with ASME B16.34, MSS-SP-99, and ASME B31.3 requirements. Typical applications include oil, gas, and industrial process systems where tubing must be connected to threaded equipment or piping at an angle.
View Details
U-KWIK Cross Coupling Protector
Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line. View Details
Gauge Root Valve – Male x Female – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX
The Gauge Root Valve Male x Female is a high-pressure valve designed for precise isolation and control of gauge lines in oil and gas industry. It allows for secure attachment of pressure gauges or instruments while maintaining reliable sealing and flow control. The male x female connection simplifies installation by providing a compact and leak-resistant interface, suitable for both standard and custom piping setups.
This valve is built to withstand pressures up to 6000 psi, with optional higher ratings available upon request, and operates over a wide temperature range from -50°C to 230°C, with extended ratings up to 500°C when using graphite seals. The metal-to-metal body bonnet seal ensures consistent high-pressure performance without relying on O-rings.
The valve’s stem incorporates a backseat design for added safety, rolled threads for smooth operation, and a self-centering, non-rotating tip that provides consistent, leakage-free shutoff. Packing is positioned below the stem threads to prevent media contact, and an adjustable gland retainer enhances stability and long-term performance. A removable T-handle enables low-torque operation, while the stem dust cap prevents contamination and protects the actuating threads.
Manufactured to ISO 9001, PED, ATEX, ASME B16.34, and MSS-SP-99 standards, each valve undergoes rigorous factory testing, including pneumatic leak checks at 1000 psi, to ensure reliability and compliance. Optional vibration, temperature, and helium testing can be performed to meet specific process requirements. Heat code traceability and NACE-compliant material options provide confidence in both performance and quality.
This combination of features makes the Gauge Root Valve Male x Female an ideal choice for safe, accurate, and durable gauge isolation in critical industrial systems.
View Details
Upgrade of existing copper DCS network
Upgrading Your Lifeline: Nulux’s Proven Expertise in Copper DCS Network Enhancement Navigating the demands of modern-day industrial operations, particularly in the oil and gas sector, necessitates a robust, dependable, and high-performing Distributed Control System (DCS) network. It's more than an infrastructure; it's the operational lifeline that engineers and professionals in the industry lean on for seamless, uninterrupted, and efficient management of processes. But what happens when this lifeline requires enhancement to meet the escalating demands of your evolving operations? This is where Nulux Network Solutions steps in, fortifying your operational backbone with our unparalleled upgrade services. Elevating Your Operational Efficacy with Upgraded Copper DCS Networks Steeped in two decades of prolific experience, Nulux has pioneered numerous industrial projects in North America, specializing in elevating existing copper networks to meet the next level of operational demands, especially in DCS network upgrades. Our seasoned team, wielding a wealth of knowledge in installing, repairing, and upgrading a myriad of copper cabling systems, ensures your DCS network isn’t merely functional but is a testament to peak performance and reliability. The Nulux Advantage: Upgrading with Precision, Experience, and Technical Mastery When your copper DCS network signals a need for an upgrade, the Nulux team becomes your strategic ally, ensuring the transition is not just seamless but also significantly amplifies your network’s efficiency, reliability, and performance. Here's how we elevate your existing DCS networks: Holistic Network Assessment: Our experts delve deep into your existing network, identifying latent potential and areas necessitating upgrades to ensure that the enhanced network is inherently aligned with your operational demands. Strategic Upgrade Planning: Our plans are carved from a place of operational understanding, ensuring the upgrades augment not just the network’s technical performance but also enhance your process management, control, and data flow. Tailored Solutions: Our upgrade solutions are crafted, ensuring they are inherently in sync with your specific requirements, be it in voice, data, or video services, ensuring the upgraded DCS network is a perfect fit for your operational landscape. Uninterrupted Support: Beyond the upgrade, we stand beside you, offering consistent technical support, ensuring your enhanced network continues to operate at peak performance throughout its lifecycle. Why Copper Remains King: Sustaining Reliability and Performance Copper networks have steadfastly held their ground as a preferred choice for structured cabling due to their high-bandwidth transmission capability, long-term reliability, ease of installation, and cost-effectiveness. Your upgraded DCS network, enriched by the myriad benefits copper brings, becomes a solid, reliable, and efficient operational backbone, ensuring enhanced control, communication, and data management across your industrial processes. Aligning with Nulux: Upgrading Your Network, Upgrading Your Success Choosing Nulux as your copper DCS network upgrade partner translates to aligning with a team that understands networks beyond their technical framework. Our solutions are derived from an innate understanding of what businesses, especially in the oil and gas sector, require to maintain a competitive edge. Our legacy, crafted over 20 years, speaks of our commitment, expertise, and unwavering dedication to delivering high-quality network solutions. It’s not just about staying connected; it’s about ensuring that every pulse of your network propels your operations toward unbridled efficiency and success. Let’s explore how your existing copper DCS network can be transformed into a superior, high-performing asset, driving your operations to new heights of efficiency and control. Connect with Nulux Network Solutions today for a comprehensive consultation and pave the way towards an upgraded operational future. View Details
5 1/2” SCSSSVs for High-Pressure Well Control
Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.
The 5 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) serves a critical safety function by enabling rapid well shut-in if uncontrolled flow occurs due to equipment malfunction or damage. Positioned in the upper section of the wellbore, this valve acts as a barrier to isolate the production pathway, helping to prevent uncontrolled release of fluids and protect personnel, equipment, and the environment.
Its fail-safe design means that any loss of control pressure or system failure causes the valve to close automatically, ensuring well integrity even in emergency situations. The valve uses a wireline-retrievable flapper mechanism that is surface-controlled, allowing operators to maintain or replace key components without pulling the tubing string—significantly reducing downtime and operational costs.
Engineered for wells utilizing 5 1/2" (139.70 mm) tubing, this valve fits landing nipples with a 4.562” seal bore and supports working pressures up to 5,000 psi. The internal valve diameter of 2.38” is designed to balance flow efficiency and tool passage capability. Additionally, by positioning the sealing surfaces outside the flow path when open, the valve minimizes wear caused by erosive fluids, enhancing durability and service life.
This SCSSSV provides a reliable, maintainable solution for well control in demanding operational environments, combining robust construction with practical features to support continuous production and rapid emergency response.
View Details
Surface-Controlled Safety Valves for 5” Casing Completion
Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.
The 5" SCSSSV (Surface-Controlled Subsurface Safety Valve) is used to shut in a well if there\'s a sudden loss of control—such as equipment failure or surface damage. Installed in the upper wellbore, it acts as a critical safety barrier, closing automatically if surface control pressure is lost. This helps protect people, equipment, and the reservoir from uncontrolled flow.
This valve is designed for 5" (127 mm) tubing and fits a 4.125" landing nipple. It’s rated for working pressures up to 5,000 psi and has a 2.38" internal bore, making it well-suited for high-rate production wells. The valve includes a self-equalizing feature that helps reduce pressure differences across the flapper during reopening, supporting smoother restarts and lowering mechanical stress.
Because it’s wireline-retrievable, the internal components can be serviced or replaced without pulling the tubing—saving time and reducing intervention costs. The flapper is machined from solid bar stock for durability, and the sealing surfaces are positioned out of the flow path when open, helping extend the life of the valve by reducing wear.
This size is typically chosen when both high flow capacity and reliable emergency shut-in protection are required.
View Details
Point to Point (P2P) and Multipoint Radio Networks
Navigating the Oil and Gas Industry's Communication Challenges: A Spotlight on Nulux's P2P and Multipoint Radio Networks The expansive terrains and remote operation sites intrinsic to the oil and gas industry have perennially posed a daunting challenge: Ensuring stable, secure, and robust communication across vast distances and through obtrusive terrains. At Nulux Network Solutions, we deliver pioneering wireless infrastructure solutions, particularly focusing on Point to Point (P2P) and Multipoint Radio Networks, ensuring that your teams, whether in the office or in the field, are never out of sync. Understanding the Nuances: P2P and Multipoint Networks In the vast expanses where the oil and gas operations unroll, the requirement for crisp and clear communication is pivotal. It is imperative to understand the differential utility of P2P and Multipoint networks, especially in an industry where both localized and widespread communications are equally critical. Point to Point (P2P) Networks: Facilitating a dedicated data link between two distinct points, P2P networks are synonymous with secured, streamlined, and rapid communication, usually empowered by a dedicated line, ensuring that data integrity and security are never compromised. Multipoint Networks: Contrasting with P2P, multipoint networks allow a single communication line to interlink more than two points, ensuring that a centralized communication hub can effectively communicate with multiple nodes in a network. Unlocking Unparalleled Advantages with Nulux The choice between P2P and Multipoint networks isn’t binary but is instead driven by the unique operational requisites of your establishment. Fortified Productivity: The capability to ensure that every node, every team member is always in the loop, effectively eliminating communication bottlenecks and fostering enhanced productivity and decision-making prowess. Bolstering Security: Especially with P2P networks, where the communication link is exclusive and dedicated, the risk of data interception or unauthorized access is minimized, ensuring that your data flows securely. Cost-Effective Scalability: In terrains or circumstances where laying physical communication lines is implausible or exorbitantly expensive, our wireless networks offer a scalable, cost-effective alternative. Dedicated to Driving Innovation in Wireless Communication As technology evolves, so does the complexity and scale of oil and gas operations. Nulux, with a rich tapestry of experience in designing and implementing wireless systems, is at the forefront, engineering solutions that not only cater to the present but are also agile enough to adapt to future demands and technological evolutions. Our commitment goes beyond merely delivering solutions. We aspire to be partners in your journey, ensuring that as your operations expand, scale, and evolve, your communication infrastructure is not just a silent spectator but a dynamic enabler, effortlessly adapting and scaling to meet your growing needs. In a realm where every second count, where the magnitude of decisions is colossal, and where communication isn’t merely a need but a critical operational requisite, Nulux Network Solutions stands as a beacon of innovative, reliable, and secure wireless communication solutions. Connect with us, and let’s script the future of wireless communication in the oil and gas industry, together. View Details
WellStar Tubing Retrievable Surface Controlled Subsurface Safety Valve 2-7/8 inch Halliburton
The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details
2.62 inch Water Injection Valve WI
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details
Tubing Hanger Coupling – 6 7/8” to 4 1/2”
The 6 7/8” to 4 1/2” Tubing Hanger Coupling is a specialized connection used in oil and gas wellhead systems to join a large-diameter casing outlet—6 7/8 inches—with 4 1/2-inch upset production tubing. This configuration is typically applied in high-flow and high-pressure wells where maintaining structural integrity and maximizing production efficiency are critical.
The coupling serves as a transition component within a tubing hanger assembly, allowing the tubing to be securely suspended in the wellhead without the need to rotate the Christmas tree during installation. This is made possible by its union nut design, which permits tightening from the side, simplifying assembly in tight or restricted spaces.
The 4 1/2” end is designed for upset tubing, which features thickened ends to provide stronger threaded connections capable of withstanding axial loads and internal pressure. This enhances the mechanical performance of the joint, reduces the risk of fatigue failure, and helps maintain seal integrity over long service periods. The coupling is also threaded to accept a back pressure valve, an essential feature that provides well control during servicing, installation, or emergency conditions.
To meet a variety of operational needs, the top and bottom threads can be customized according to site or equipment specifications. The coupling is typically manufactured from high-strength, corrosion-resistant materials and in compliance with industry standards such as API 5CT, ensuring it performs reliably under harsh downhole conditions.
Overall, the 6 7/8 x 4 1/2” Tubing Hanger Coupling is chosen for its ability to support larger bore wellhead designs while maintaining compatibility with standard tubing strings. It offers a dependable solution in completions where mechanical strength, pressure containment, and ease of assembly are priorities.
View Details
Specialized e-line tool services
Empowering Operations with Advanced Solutions: InWaTec Combined’s Specialized E-line Tool Services At InWaTec Combined, we are dedicated to pushing the boundaries of operational excellence in the primary industries sector. Our specialized E-line tool services are meticulously crafted to address the unique challenges faced by operators, offering a suite of cutting-edge solutions that epitomize efficiency and redefine maintenance standards. In the heart of every successful operation lies the ability to adapt and innovate. InWaTec Combined’s specialized E-line tool services are the embodiment of this ethos. With our comprehensive array of tools, we empower operators to enhance well performance, streamline diagnostic processes, and execute interventions with unparalleled precision. Our services are not just about providing tools; they are about delivering a strategic advantage. Here’s a glimpse into our suite of specialized E-line tool services: Diagnostic Excellence: With the fast-paced evolution of well technologies, the need for accurate diagnostics has never been more critical. Our suite includes state-of-the-art logging tools that provide real-time data on well conditions, enabling operators to make informed decisions swiftly. Precision Interventions: Whether it's for perforation, plug setting, or cutting, our E-line tools are engineered for precision. We understand that each intervention is unique, and our tools are designed to deliver tailored solutions that ensure successful operations, every time. Maintenance and Recovery: Our maintenance tools, from scrapers to bailers, are selected for their reliability and effectiveness. When it comes to recovery operations, our fishing tools are second to none, providing the assurance that you can retrieve what is needed without undue delay. Customized Solutions: Recognizing that each operation has its distinct challenges, we offer customized tool services. Our expert team works closely with clients to develop and deploy tools that are specifically designed to meet the unique demands of their wells. InWaTec Combined is committed to innovation and excellence. Our specialized E-line tool services are continually evolving, incorporating the latest technologies and methodologies to stay ahead of industry demands. By partnering with us, operators gain access to a level of efficiency and maintenance capability that sets new industry benchmarks. We believe in a future where every operation is optimized for peak performance, and our specialized E-line tool services are a cornerstone of this vision. Choose InWaTec Combined for your operations, and experience the power of advanced tools and expert service that drive success. View Details
Ultra High Density Power Supply for Subsea
Unleash Unrivaled Power: Ultra High Density Power Supplies for Subsea Exploration In the mesmerizing depths of the ocean, where the most critical subsea missions take place, a reliable and efficient power supply can be the difference between success and failure. We take pride in introducing our latest breakthrough innovation - the Ultra High Density Power Supplies. Designed to thrive in the most challenging subsea environments, our power supplies empower your ROVs and subsea equipment to achieve unparalleled performance, even at depths of up to 400 meters. Harness the Power of Innovation As pioneers in subsea robotics, we understand the unique demands of the underwater world. That's why we have poured our expertise and passion into crafting the Ultra High Density Power Supplies. These cutting-edge power solutions are engineered to deliver optimal performance while meeting the strictest safety and reliability standards. Power Up Your Subsea Missions With our Ultra High Density Power Supplies, you can unleash the full potential of your subsea equipment. Whether you are conducting deep-sea research, underwater inspections, or oil and gas exploration, these power supplies will be the backbone of your mission's success. Compact, Yet Powerful Size and weight are crucial considerations in subsea operations. Our Ultra High Density Power Supplies are meticulously designed to maximize power output while maintaining a compact and lightweight form factor. This ensures seamless integration with your existing ROV or subsea systems, allowing for more efficient deployment and operation. Built for the Depths Operating in the deep ocean is no easy feat. Our power supplies are rigorously tested and rated for depths of up to 400 meters, providing you with the confidence to tackle the most challenging subsea missions. No matter how extreme the conditions, our power supplies will deliver unwavering performance. Safety and Reliability Above All Safety is our top priority. Our Ultra High Density Power Supplies are engineered with advanced safety features, ensuring protection against voltage spikes, short circuits, and overloads. You can trust that your equipment and personnel are safeguarded during every underwater operation. The Advantage Our power supplies are the result of meticulous research, engineering expertise, and a passion for pushing the boundaries of what's possible beneath the waves. Experience the Future of Subsea Power Are you ready to take your subsea missions to new depths of success? Embrace the power of innovation with Ultra High Density Power Supplies. Whether you are an oceanographer, offshore engineer, or underwater explorer, our power supplies will be the driving force behind your mission's achievements. Explore the Depths Join the ranks of leading subsea explorers. Our Ultra High Density Power Supplies are the key to unlocking the full potential of your subsea ventures. Contact us today to elevate your underwater capabilities and embark on a journey of endless possibilities beneath the waves. View Details
6 5/8" Mech-2 Double Grip Mechanical Set Packer
Ballycatter Mech-2 Double Grip Mechanical Packer
Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”
The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.
The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.
The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.
With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.
View Details
CSA 60 unit, Locking FAST charger rack
Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment. View Details
Knuckle Joint for Wireline Toolstring
Enhancing Wireline Flexibility with HOCA Oil Tools B.V.'s Advanced Knuckle Joints In the demanding environments of oil and gas extraction, the adaptability and precision of downhole tools are paramount. At HOCA Oil Tools B.V., we specialize in providing state-of-the-art wireline solutions, including our wide range of Knuckle Joints, known for their exceptional flexibility and reliability. Our Knuckle Joints are designed to provide pivotal flexibility in the Wireline Tool String, facilitating angular movement between the tool string and the running or pulling tool, an essential feature for navigating complex downhole geometries. Six Key Benefits of HOCA's Wireline Knuckle Joints: Enhanced Flexibility: Our Knuckle Joints allow for angular movement, enabling the Wireline Tool String to navigate through deviated wellbores efficiently. Improved Tool Placement: By enabling better maneuverability, our Knuckle Joints facilitate precise tool placement, improving the success rates of downhole operations. Increased Operational Range: The added flexibility extends the operational range of wireline tools, allowing for more complex and challenging interventions. Robust Design: Constructed with high-quality materials, our Knuckle Joints withstand harsh downhole environments, ensuring longevity and reliability. Versatile Application: Suitable for a variety of downhole activities, our Knuckle Joints are essential for both standard operations and complex well interventions. Easy Integration: Available with both Threaded and QLS Connections, our Knuckle Joints seamlessly integrate into existing tool strings, enhancing operational efficiency. HOCA's Diverse Array of Wireline Knuckle Joints: Type ‘AO’ Knuckle Joints (Threaded Connection): These are available in sizes from 3/8” to 2 1/2”, designed for easy integration with various tool strings. They offer exceptional flexibility and strength, with sizes accommodating different operational needs, ensuring that tools can navigate wellbore paths effectively. Type ‘AD’ Knuckle Joints (QLS Connection): Catering to advanced operational requirements, these Knuckle Joints provide the same high-level flexibility with quick lock-and-seal connections for faster deployment and retrieval, available in sizes ranging from 1 1/2” to 2 1/2”. Rebco Type ‘AS’ Knuckle Joint (RQLS Connection): An addition to our lineup, offering enhanced swivel action and compatibility with a range of wireline tools, facilitating seamless downhole operations. Each of our Knuckle Joints is engineered with precision, incorporating features such as double fishing necks for increased adaptability and operational safety. The diverse sizes and connection types we offer ensure that there is a HOCA Knuckle Joint suitable for every downhole challenge. By choosing HOCA Oil Tools B.V. for your wireline operational needs, you are selecting a partner dedicated to innovation, quality, and customer service. Our Knuckle Joints represent just one aspect of our commitment to providing the oil and gas industry with tools that meet the highest standards of performance, reliability, and safety. Embrace the flexibility and efficiency of HOCA’s Wireline Knuckle Joints to enhance your downhole operations. Contact us today to learn more about how our tools can transform your well interventions and streamline your operational workflows View Details
7 5/8" HP-5 Hydraulic Set Production Packer
Ballycatter HP-5 Production Packer
Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.
The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.
The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.
Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.
View Details
24 inch Well Servicing Pipe Wrenches for torquing tubulars and downhole tools
The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose! View Details
OCTG Tubing from 2 3/8 inch to 7 inch for oil and gas well completions
OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Tubing is the pipe placed in the well that is exposed to flowing fluids from the reservoir to surface. It is uncemented and able to pulled and replaced in the event the pipe erodes or corrodes. Our international network of manufacturers and warehouses have almost all weights and grades in stock. View Details
Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch
The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details
Fiber Optic Splice on Connectors
Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts. View Details