The 3 Valve Manifold T Type – Pipe to Flange is specifically engineered to connect impulse lines to differential pressure transmitters, ensuring accurate measurement and reliable operation in industrial systems. Its T-type configuration features two block valves, one equalizer valve, and vent/test ports, allowing operators to isolate the transmitter, equalize pressure, and perform maintenance or calibration safely without disrupting the overall process. This setup is particularly useful in oil and gas, petrochemical, and process control applications where continuous operation is critical.

The manifold is built with 1/2” Female NPT Pipe to Flange connections set on 54mm (2-1/8”) centers, providing standardized and secure interfacing with pressure transmitters. High-quality construction includes metal-to-metal body and bonnet seals to withstand pressures up to 6000 PSI and temperatures ranging from -50°C to 230°C, with higher temperature ratings available using graphite materials. The design ensures leak-free performance through features such as self-centering, non-rotating valve tips, back-seated stems for added security, and rolled threads for smooth operation.

Additional operational benefits include easily adjustable gland retainers for maximum packing stability, removable T-handles for low-torque operation, and dust caps to protect actuating threads. Each valve is 100% factory tested, with traceable heat codes, and meets rigorous standards including ASME B16.34, MSS-SP-99, and ASME B31.3, making the manifold a robust and reliable solution for high-pressure industrial applications.

The HDI 3300 Temperature Gauge System is an intrinsically safe, battery-powered electronic temperature measurement device commonly used in oil and gas operations requiring precise temperature monitoring. Typical applications include high-pressure nitrogen pumping, geothermal and mud-based drilling, well control manifolds, flare stacks, and bulk liquid storage.

The system consists of a digital gauge display, sensor assembly, and interconnecting cable. The sensor, usually a Resistance Temperature Detector (RTD), is housed in a durable stainless steel case with various mounting options like 2-inch Male NPT, hammer unions, or flanges, allowing flexible installation near the temperature source.

The display features an LCD with numeric and analog bar graph outputs, providing temperature readings with 0.1-degree resolution and ±0.5% full-scale accuracy over a range of -50 to 150°C (-50 to 300°F). Users can switch between Celsius and Fahrenheit. It includes 4-20mA and 0-1 VDC output options for integration with remote monitoring, data logging, or control systems, and supports external power inputs.

Designed for ease of maintenance, the system is field-repairable with a replaceable battery pack. The sensor and display are factory-matched and calibrated, requiring recalibration if components are replaced. The gauge fits standard 6-inch panel cutouts and supports multiple mounting patterns. Cable lengths are customizable up to 200 feet or more.

The system operates reliably in temperatures from -40°C to +70°C and is certified for hazardous environments, with a rugged stainless steel sensor housing to withstand harsh field conditions.

The 3300 is well-suited for environments requiring precise, continuous temperature monitoring, including high-pressure drilling, well control, and fluid storage applications. Its intrinsically safe design provides dependable operation in hazardous locations without compromising safety. The solid-state electronics and durable construction reduce maintenance and downtime, while versatile mounting options allow placement close to the measurement point for accurate readings. Featuring clear numeric and bar graph displays along with remote output capabilities, the system supports timely decision-making and integrates easily with larger monitoring setups, enhancing process control and operational safety in demanding conditions.

The 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT is designed to provide a reliable and compact solution for connecting impulse lines to pressure transmitters and gauges. This manifold allows operators to safely isolate instruments from the process for maintenance, calibration, or testing, without the need to shut down the system. The T-type configuration features two valves that control flow to and from the instrument, enabling efficient block, bleed, and vent operations.

The pipe-to-pipe design ensures a direct connection to the piping system, which reduces potential leak points and simplifies installation. It is suitable for high-pressure applications, with a standard working pressure of 6000 PSI and options available for higher pressures. The manifold is built with a metal-to-metal body and bonnet seal for enhanced durability and temperature resistance, with materials that can comply with NACE MR 01 75 standards for corrosion resistance.

Additional features include a removable T-handle for low-torque operation, self-centering non-rotating stems for consistent shutoff, and a dust cap to prevent contamination. Packing is positioned below the stem threads to isolate the threads from the process media, and the stem’s rolled threads provide smooth operation and long life. The manifold is 100% factory tested for leakage and performance, ensuring reliable operation in critical oil and gas applications.

The Ball Valve Lever Operated 3-Way Tube OD Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows fluid to be routed between multiple tubing lines, making it useful for applications such as flow diversion, sampling, injection systems, or process line bypasses.

The side entry design provides easier access to the ball and internal components for maintenance or inspection, while also allowing compact installation in tight piping layouts. The tube OD connections enable direct attachment to tubing without additional fittings, simplifying assembly, reducing potential leak points, and providing secure, inline connections.

The valve uses a floating ball design to ensure consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and reliable with a quarter-turn lever, providing fast control with low torque. The internally loaded stem with shoulder prevents blowout, and replaceable seats and packings allow maintenance without replacing the entire valve.

Angle Pattern Needle Valves Male x Female are designed to control the flow of liquids or gases in a piping system. The angle pattern allows the flow to change direction by 90 degrees, reducing piping complexity and minimizing pressure drop.

The male x female configuration enables easy connection to different pipe types and sizes, providing flexibility for installation in various system layouts. These valves are suitable for high-pressure applications, ensuring reliable and leak-free operation.

In oil and gas operations, they are used for controlling flow to instruments, transmitters, or equipment where space is limited and accurate flow control is needed. Metal-to-metal seals and durable stems ensure long-term performance under demanding conditions.

The HDI 3200 MGS Differential Monitoring System is a battery-powered, stand-alone device designed to monitor critical pressures and temperature in Mud Gas Separator operations within oil and gas drilling environments. It measures and displays the differential pressure between the liquid seal and mud gas pressure, along with monitoring the mud temperature. These measurements are essential for maintaining safe and efficient separator function, ensuring proper gas-liquid separation, and preventing equipment damage or hazardous conditions.

The system uses accurate and reliable pressure and temperature gauges, with pressure readings displayed in 1 PSI increments. It supports alternate engineering units to meet user preferences or site requirements and provides a 4-20mA output for integration with local or remote monitoring and control systems.

The enclosure is made of a durable polycarbonate/PBT alloy that is impact-resistant and UV stabilized, suitable for harsh field conditions including exposure to sunlight, moisture, and rough handling. Its compact, modular design allows for easy installation and maintenance.

The 3200 MGS Differential Monitoring System is essential in drilling operations for continuously monitoring pressure differences and temperature within Mud Gas Separators. This helps ensure the separator is functioning correctly by preventing gas or liquid buildup that could lead to equipment damage or unsafe conditions. By providing real-time data, the system supports safer drilling processes, reduces downtime, and helps maintain optimal performance in challenging well conditions.

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.