Ballycatter.ca - Industrial Equipment

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them. View Details

ROV Console and Monitor Racks

Custom ROV Console and Monitor Racks: Unleashing the Power of Personalization in Subsea Operations We understand that no two subsea missions are alike. Each expedition presents unique challenges and requires specific tools to achieve success. That's why we are proud to introduce our state-of-the-art Custom ROV Console and Monitor Racks, designed to cater to your specific ROV missions like never before. Your Mission, Your Configuration Gone are the days of adapting generic consoles to your unique needs. With the Custom ROV Console and Monitor Racks, you have the power to create a setup tailored precisely to your mission requirements. Our team of experts collaborates closely with you to understand the intricacies of your underwater objectives. Whether you need additional video inputs, specialized controls, or specific telemetry interfaces, we've got you covered. Unmatched Flexibility and Versatility Designed for seamless integration, our Custom ROV Consoles and Monitor Racks offer unparalleled flexibility and versatility. Whether you're exploring the depths of the ocean, conducting pipeline inspections, or conducting scientific research, our customized solutions ensure your ROV is equipped to handle any challenge. Enhanced Efficiency and Productivity Efficiency is the cornerstone of successful subsea operations. With a bespoke ROV console, you can optimize your workflow, reducing operational downtime, and maximizing productivity. Customized monitor racks allow you to monitor crucial data and video feeds effortlessly, providing you with real-time insights for quick decision-making. Uncompromising Quality and Reliability When it comes to subsea missions, there's no room for compromises. Our custom ROV consoles and monitor racks are crafted with the highest quality materials and cutting-edge manufacturing techniques, ensuring longevity and reliability in every venture. The Advantage • Expert Consultation: Our team of skilled professionals works with you to understand your unique mission requirements, ensuring a tailored solution that aligns perfectly with your goals. • Innovative Design: With a focus on innovation, our custom ROV consoles are equipped with the latest technology, empowering you with the tools you need for successful subsea exploration. • Rigorous Testing: Before delivery, every custom ROV console and monitor rack undergoes rigorous testing and quality checks, guaranteeing flawless performance in the field. • Exceptional Support: we are committed to providing unparalleled customer support throughout your journey. Our team is always ready to assist you with any questions or technical support you may need. Unlock the Full Potential of Your ROV Missions Don't settle for off-the-shelf solutions that don't meet your exact requirements. With the Custom ROV Console and Monitor Racks, you have the power to shape your subsea destiny. Let us help you design the perfect setup to conquer the depths and revolutionize your ROV missions. Contact us today to explore the limitless possibilities of personalized subsea exploration! View Details

Valve and Prong Type Equalizing Sub-Assembly

Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry. View Details

FH Hydrostatic Retrievable Packer

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

3” Sleeve Style Gas Blowoff Valve

The Blowoff Valve is a 3-inch sleeve-style gas blowoff valve designed for use in aero-derivative industrial gas turbines. Its primary function is to isolate gas fuel during turbine shutdowns or emergency events, helping prevent overspeed conditions and damage caused by uncontrolled combustion.

This valve features a solenoid-pilot actuation system and operates with either 24 VDC or 95–140 VDC electrical input. It is designed with a 3-inch outlet flange and built entirely from stainless steel materials to ensure durability and compliance with NACE standards for sour gas environments.

Performance characteristics include a 110 millisecond full-stroke opening time and 1 second full-stroke closing time, meeting the rapid response requirements necessary for turbine protection. The valve is capable of withstanding heat soak temperatures up to 400°F, allowing it to function reliably in high-temperature turbine enclosures.

For safety in hazardous environments, the blowoff valve is certified to CE-ATEX Group IIA, Category 3, Zone 2, T3, supporting its use in oil and gas facilities with potentially explosive atmospheres.

This valve is often used in redundant pairs to provide dual isolation capability, increasing system reliability. Its application is critical to turbine safety systems, ensuring that fuel flow can be quickly and reliably shut off when required.

View Details

9 5/8" HP-5 Hydraulic Set Production Packer

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Fiber Optic Mechanical Connectors

Navigating Optimal Connectivity with Nulux’s Fiber Optic Mechanical Connectors The Oil and Gas industry is no stranger to the integral role that secure, precise, and reliable connectivity plays in ensuring the smooth execution of its multifaceted operations. Amidst the sprawling expanse of pipes, rigs, and refineries lies a nexus of data, flowing incessantly, safeguarding operational integrity, and facilitating momentous decisions. In the paradigm of fostering such impeccable connectivity, Nulux Network Solutions introduces its exemplary service of deploying Fiber Optic Mechanical Connectors. Connecting More Than Just Fibers A fiber optic connector, though small in stature, plays a monumental role in ensuring that the lifeblood of your operations – your data – traverses through the network with utmost precision and minimal loss. Positioned meticulously at the end of a line, a fiber optic connector becomes the gateway through which connectivity to network devices or other fiber connectors in a patch panel is realized. Mechanical fiber connectors stand as sentinels, guarding the alignment of the cores of fibers, ensuring that the passage of light – and thus your data – is uninterrupted and lossless. The efficacy of these connectors is such that, when adeptly installed, they concede incredibly minimal light due to reflection or misalignment of the fibers. A Panorama of Possibilities with Mechanical Connectors Navigating through the approximately 100 different types of fiber optic connectors that have graced the market, Nulux remains undeterred and proficient in ensuring the selection and installation of the most apt connectors to meet your specific operational needs. Why Nulux’s Fiber Optic Mechanical Connectors? Spectrum-Wide Expertise: Offering products, solutions, and services that span across the entire energy value chain, Nulux’s offerings are not merely solutions but a steadfast commitment to ensuring your operations are perpetually connected and sustainable. Tailored Connectivity Solutions: Every operation in the oil and gas sector is uniquely nuanced. Nulux prides itself on delivering custom, tailored solutions, ensuring that your fiber optic connectors are not just installed but are perfectly aligned with your operational needs. Navigating Towards Sustainability: Our engagement with our customers extends beyond providing solutions. We stand alongside you, steering towards a more sustainable future, ensuring that every connector, every fiber, and every byte of data propels us towards a future that’s not just connected but also environmentally conscious. Lighting the Pathway of Data: Mechanical connectors from Nulux assure that the luminal path your data treads is secure, reliable, and optimal, ensuring that every bit of information reaches its destination as intended. Your Data’s Journey, Secured with Nulux In the nexus of your operations, where data flows with the same criticality as the oil traversing through your pipelines, Nulux Network Solutions stands as a guardian, ensuring that every byte of data reaches its destination securely, reliably, and optimally. Explore with Nulux, the realms of impeccable connectivity, safeguarding your operations with our Fiber Optic Mechanical Connectors, and let’s forge ahead, crafting a future where every connection propels us towards sustainability and operational excellence. Empower your network, ensure your connectivity, and enlighten your future with Nulux. View Details

LM2500XPRESS+G5 DLE UPT Gas Turbine

The LM2500XPRESS+G5 DLE UPT is a modular aeroderivative gas turbine system built for fast, flexible, and efficient power generation in both onshore and offshore environments. It is particularly well-suited for applications across LNG facilities, gas pipelines, gas processing plants, and general power generation, including electricity production at both 50 and 60 Hz, without the need for a speed reducer.

The "+G5" designation refers to its fifth-generation power turbine, offering the highest output and efficiency in the 20–40 MW class. It supports both high-speed and low-speed power turbine configurations, allowing integration into a variety of grid or mechanical drive systems.

At its core, the G5 includes a high-pressure compressor derived from the LM2500+G4, now redesigned for longer service life. In a simple cycle, it achieves up to 41% efficiency, which is notable for a turbine of this size class. The system can start from cold and reach load in about five minutes, making it ideal for rapid-response applications.

The unit is built for speed and simplicity. It’s shipped in preassembled modules, with a compact footprint that helps reduce installation time.

The Dry Low Emissions (DLE) system supports environmental compliance without requiring water or steam injection, simplifying operations and reducing resource demands.

Altogether, the LM2500XPRESS+G5 DLE UPT provides a practical solution for projects that need reliable, fast, and efficient power without a complex setup.

View Details

Storm Choke 2-1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Pipe Fittings Adapters – Female to Male NPT – 1/8", 1/4", 3/8", 1/2", 3/4", 1” – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Pipe Fittings Adapters Female to Male NPT are designed to connect a female-threaded pipe or fitting to a male-threaded pipe, providing a secure and leak-resistant joint. They are made from high-quality materials such as stainless steel, brass, and carbon steel to ensure durability and corrosion resistance in demanding environments.

The adapters are suitable for a wide range of pressures, with standard ratings up to 10,000 psi, and conform to industry standards including ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228.

These adapters are used extensively in oil and gas applications, instrumentation, and process control systems where it is necessary to adapt different thread types or sizes. Their precise threading ensures maximum engagement and leak-tight connections, making them reliable for high-pressure or critical systems.

Available in sizes ranging from 1/8 inch to 1 inch, these adapters support efficient and safe connections in pipelines, instrumentation panels, and chemical or petrochemical systems. Their compact design allows for installation in tight spaces without compromising performance, and they are free from burrs or debris to maintain smooth flow paths.

View Details

MC Injection Safety Valve 3-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Wireless Communication Tower Construction

Soaring Above Communication Challenges: Nulux Network Solutions Pioneers in Wireless Tower Construction for the Oil and Gas Industry Exploration, extraction, and operational activities in the oil and gas industry are intrinsically bound to the formidable environments - remote locations, vast distances, and oftentimes, challenging terrains. Navigating through these physical barriers to establish a stable, secure, and scalable communication network necessitates innovative and robust solutions. This is where Nulux Network Solutions ascends, bridging the communication divide with unparalleled expertise in Wireless Communication Tower Construction. Pillars of Communication: Why Tower Construction Matters The landscape of the oil and gas sector demands the creation of a network that is not only extensive but also exceptionally reliable. Communication towers become the veritable backbone, linking disparate operations, ensuring data flow, and maintaining a coherence that is vital for smooth functionalities and decision-making processes. Constructing these towers, especially in the arduous terrains that characterize the oil and gas industry, requires a blend of engineering expertise, practical experience, and an acute understanding of wireless communication nuances. Nulux’s Distinction: A Synthesis of Experience and Innovation With an illustrious history in designing and implementing an array of wireless systems and infrastructures, Nulux has emerged as a leader in wireless tower construction and rigging, ensuring that the tapestry of communication across your operations, be it P2P or Multipoint networks, remains uninterrupted and secure. Adaptivity and Scalability: As your operations evolve, so does your communication network. Our towers are constructed with a forward-looking approach, ensuring they are capable of adapting to technological advancements and scalable to accommodate your expanding operational horizons. Reliability in Rigorous Environments: Our construction protocols and strategies are molded by our extensive experience in various terrains and environments, ensuring that the towers stand resilient in the face of geographical and meteorological challenges. A Mesh of Connectivity: Whether linking the executive decisions from central offices to the far-reaching extraction sites or facilitating data-driven operations across the entire network, our towers ensure that every node remains perpetually connected. Navigating Through P2P and Multipoint Networks Understanding and integrating varied network configurations such as P2P and Multipoint networks into our tower construction strategy, we ensure that the specific communicational and operational prerequisites of your business are met. End-to-End P2P Solutions: For secure, dedicated, and high-speed communication between two points, our P2P network solutions, enabled by strategically positioned towers, ensure that your data travels securely and swiftly. Expansive Multipoint Configurations: When the operational framework demands centralized communication with multiple nodes, our towers facilitate a sturdy and coherent multipoint communication network. Your Partner in Progress: Nulux Network Solutions As we stride into the future, where the fusion of technology and operations will become even more intrinsic, Nulux stands as your partner, ensuring that the wireless communication networks powering your operations are not just contemporaneous but also future-ready. Connect with us, and let’s architect a communication network that empowers, enhances, and ensures the seamless functionality of your operations in the oil and gas industry, traversing through the present and into the future. View Details

Slickline Swivel Joint

Unlocking Efficiency in Downhole Operations: HOCA Oil Tools B.V.'s Advanced Slickline Swivel Joints In the dynamic landscape of downhole operations, the role of slickline swivel joints becomes pivotal in ensuring seamless, efficient, and safe wireline operations. HOCA Oil Tools B.V., a renowned name in the oil and gas industry, stands at the forefront of delivering cutting-edge slickline solutions. Our array of slickline swivel joints is designed to meet and exceed the operational demands and challenges faced by our clients. Pioneering Slickline Swivel Joints: HOCA Oil Tools B.V. offers an extensive range of slickline swivel joints, including the Type ‘HO’ and ‘HD’ swivel joints, engineered to minimize wireline twisting during downhole operations. This not only enhances safety but also improves operational efficiency by reducing the risk of wireline entanglement and breakage. Key Benefits of Our Slickline Swivel Joints: Reduced Wireline Twisting: Our swivel joints significantly reduce the twisting of wireline, thus minimizing the risk of operational downtime and wire breakage. Enhanced Operational Safety: By preventing wireline kinks and twists, our swivel joints contribute to safer downhole operations, protecting both personnel and equipment. Increased Efficiency: Smooth wireline operations ensure quicker job completion and reduced non-productive time. Durability and Reliability: Made from high-grade materials, our swivel joints withstand harsh downhole conditions, ensuring long service life and reliability. Versatility: Available in various sizes and configurations, our swivel joints cater to a wide range of downhole requirements and wireline types. Ease of Integration: Designed for easy integration into existing tool strings, our swivel joints facilitate seamless operations without the need for extensive modifications. Main Features of HOCA's Slickline Swivel Joints: Type ‘HO’ Swivel Joint: Designed to minimize wireline twisting, available in sizes from 1” to 2 1/2", with threaded connections for easy installation. These swivel joints feature top sub, pin, ball connector, ball sub, and bottom sub components, ensuring robust performance and ease of maintenance. Type ‘HD’ Swivel Joint: Similar to the Type ‘HO’ but designed for even more demanding environments, with ‘QLS’ - ‘RQLD’ connections, providing additional strength and durability. These swivel joints are also available in sizes from 1 1/2” to 2 1/2", tailored for heavy-duty operations. At HOCA Oil Tools B.V., we understand the complexities of downhole operations. Our slickline swivel joints are a testament to our commitment to innovation, safety, and efficiency. Embrace the future of wireline operations with HOCA, where performance meets reliability. Contact us today to learn more about how our slickline solutions can optimize your operations. View Details

3-1/2" WR-SCSSSV FXE

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”

The 3-1/2" WR-SCSSSV FXE is a Ballycatter model safety valve specifically designed for installation in the upper wellbore to provide an emergency shut-off of the production flow path. This valve plays a crucial role in well control by isolating the wellbore during emergency situations such as system failures or damage to surface production control facilities. Its fail-safe design ensures that the valve automatically closes to protect the wellbore and surface equipment whenever a fault occurs.

This safety valve is a flapper-type valve that is both surface controlled and wireline retrievable, allowing operators to easily deploy, operate, and retrieve the valve without extensive well intervention. The valve is installed within a corresponding model Landing Nipple, ensuring precise fit and reliable operation within the tubing string.

The design incorporates a self-equalizing mechanism that balances pressure differentials across the valve, which helps maintain consistent performance even under varying downhole pressures. This self-equalizing feature reduces the risk of valve malfunction due to unexpected pressure changes.

When the valve is in the open position, the sealing surfaces are positioned outside the flow path, ensuring that the fluid can pass freely without obstruction or erosion on the sealing components. This arrangement optimizes flow efficiency and helps extend the valve’s operational life. The flapper itself is made from solid bar stock, providing a strong and durable barrier that can withstand the harsh conditions found in high-pressure well environments.

The valve is rated for working pressures up to 10,000 psi, allowing it to operate reliably under high-pressure well conditions. The 3-1/2" WR-SCSSSV FXE is designed to ensure wellbore isolation in emergency situations, providing a critical safety function in the well control system.

View Details

Work Barge in European waters

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Check Valve Poppet Type – Female x Female 1/2" NPT – 6000 PSI – ISO 9001

The 1/2" poppet check valve with female × female NPT connections is designed to allow fluid to flow in only one direction while preventing any backflow. This is important in oil and gas systems because backflow can damage pumps, pipelines, and other equipment. The valve is commonly used in medium-sized lines, instrumentation, sampling, and control applications where reliable flow control is required.

The valve operates at a standard pressure of 6000 psi, with optional configurations available for pressures up to 10000 psi. Cracking pressures, the minimum pressure needed to open the valve, can be selected from 1/3 to 25 psi, giving flexibility to match the needs of specific systems. Its poppet mechanism responds quickly to flow changes and provides a tight seal, ensuring consistent performance and preventing leaks.

Made from corrosion-resistant materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, the valve is suitable for harsh oil and gas environments. Female × female NPT connections allow for secure inline installation without extra fittings, reducing the risk of leaks and simplifying integration into existing piping.

Each valve is factory tested for cracking and reseal performance, ensuring it opens and closes reliably. Heat code traceability is provided to verify material quality. Additional testing, such as vibration, temperature, and helium testing, can be requested for applications requiring high reliability.

This valve is compact, durable, and designed for long-term operation with minimal maintenance. It helps maintain system pressure, protects critical equipment, and ensures that oil and gas systems operate safely and efficiently.

View Details

2-3/8 inch Halliburton WellStar TR-SCSSSV

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details

9 5/8" Mech-2 Double Grip Mechanical Set Packer for 29.3-36 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

HDI 1000B Pressure Gauge System

The HDI 1000B Pressure Gauge System is an intrinsically safe, battery-powered, solid-state electronic pressure gauge designed for accurate and reliable pressure measurement in demanding industrial environments. It measures pressures ranging from 30 psi up to 20,000 psi with an accuracy of ±0.50% of full scale. The system features a durable design with no fluids or moving parts, reducing maintenance requirements and improving long-term reliability.

The gauge includes a clear liquid crystal display (LCD) that combines a five-digit numeric readout for precise pressure values with a 101-segment analog bar graph for quick trend visualization. The display is easily readable in various lighting conditions and includes a low battery indicator to ensure continuous operation.

The 1000B system is modular, comprising a gauge display, inline cable, and sensor assembly. This design allows the display to be positioned close to or remotely from the pressure measurement point, providing flexibility in installation. The system supports multiple connection types including 2” Male NPT, 2” 1502, 2” 2002/2202, or flanged connections to fit different piping standards.

Power is supplied by a replaceable internal 3.6 VDC battery pack, which typically lasts up to 18 months during continuous operation. The gauge system is designed to retain calibration and settings during battery changes or power interruptions, enhancing reliability in field use.

For integration with control systems, the 1000B offers optional 4-20 mA or 0-1 V outputs, enabling remote monitoring, data logging, or connection to PLCs and chart recorders. The system is built to withstand high vibration environments, making it suitable for offshore, drilling, and other heavy industrial applications.

Overall, the 1000B Pressure Gauge System provides a precise, low-maintenance, and versatile solution for pressure measurement needs where safety, accuracy, and durability are critical.

View Details

Tank Truck for fluid hauling including potable water

Tank Trucks are used to transport a variety of liquids, such as chemicals, liquids, gases, beverages and dry goods, such as grain. Given the expensive and complex nature of tank truck equipment, the specialized skillset required of our drivers, and the increased regulatory environment facing, tank truck carriers deal with the challenges of all trucking companies and many which are unique to the tanker industry. Tank Trucks haul hazardous products, such as petroleum products, chemicals, gases, and hazardous wastes. They also haul non-hazardous materials such as bulk foods and dry bulk products such as cement. View Details

NWB-30 Charger

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30. View Details

LM2500 HPT Vertical Stand

The LM2500 High Pressure Turbine (HPT) Vertical Stand is a support fixture designed to hold the HPT module of the LM2500 gas turbine in a vertical position. It is mainly used during maintenance, inspection, or transport of the turbine module.

By keeping the turbine upright, the stand helps ensure that the module stays stable and properly aligned while work is being done. This setup also makes it easier for technicians to access certain areas of the HPT that would be harder to reach if the module were lying flat.

The stand is built to handle the weight of the HPT and includes features like mounting points or forklift slots for safe and easy movement within a workshop or maintenance area. It is commonly used in the oil and gas industry where LM2500 turbines are found in power generation or mechanical drive applications.

In short, the HPT Vertical Stand is a practical tool that helps keep the turbine secure, makes maintenance tasks safer, and supports good handling practices.

View Details

6 5/8" Mech-1 Single Grip Mechanical Set Packer

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Custom ROV Hydraulics including Metering and Auxilary Pumps

Unleash the Power of Custom Hydraulics: Metering and Auxiliary Pump Solutions In the depths of the ocean, where precision and reliability are paramount, having the right hydraulic system can make all the difference in the success of your subsea operations. We take immense pride in introducing our cutting-edge Custom Hydraulics, including the Metering Pump and Auxiliary Pump solutions. Designed to excel in the harshest subsea environments, our hydraulic systems offer unrivaled performance, efficiency, and adaptability. Custom Engineered for Your Unique Needs We understand that every subsea mission is unique, and off-the-shelf solutions may not always suffice. That's why we offer custom-engineered hydraulics tailored to your specific requirements. Our team of experts works closely with you to design and manufacture hydraulic systems that perfectly align with the demands of your subsea projects. Metering Pump: Precision at Its Best When it comes to accurate fluid control and metering, our Metering Pump stands in a class of its own. Whether you need precise dosing in underwater chemical injections, flow rate control in subsea sampling, or any other application that demands precision, our Metering Pump delivers flawless results. With unparalleled accuracy and reliability, you can trust our Metering Pump to handle the most critical tasks with ease. Auxiliary Pump: Boosting Your Subsea Power The Auxiliary Pump is your reliable companion when you require additional hydraulic power for your subsea equipment. Whether it's powering hydraulic manipulators, tooling skids, or other heavy-duty operations, our Auxiliary Pump is up to the task. Its robust construction and high-performance capabilities ensure seamless integration with your existing hydraulic system, expanding its capabilities to new heights. Built to Withstand the Abyss Operating in the challenging subsea environment demands hydraulic systems that can endure the pressure—both literally and figuratively. Our Custom Hydraulics are engineered and tested to withstand the extreme conditions of the deep ocean. With superior corrosion resistance, rugged construction, and advanced sealing technology, our hydraulic solutions thrive even in the most demanding underwater scenarios. Safety and Performance, Hand in Hand Safety is our guiding principle. Our Custom Hydraulics are equipped with cutting-edge safety features, ensuring smooth and secure operation during every subsea mission. With precise flow control and reliable power delivery, you can focus on your objectives without compromising on safety. Unlock Your Subsea Potential The Custom Hydraulics, including the Metering Pump and Auxiliary Pump, have been engineered to optimize your subsea operations, increase efficiency, and deliver unmatched performance. Experience the Future of Subsea Hydraulics Elevate your subsea missions to new heights with Custom Hydraulics. Whether you are in research, exploration, or offshore engineering, our hydraulic solutions will be the driving force behind your success. Join the Subsea Revolution Join hands and become a part of the subsea revolution. Contact us today to explore the possibilities of our Custom Hydraulics and embark on a journey of groundbreaking discoveries beneath the waves. View Details

Premier Removable Production Packer

The Premier™ packer is a hydraulic-set, large-bore, removable production packer. It combines the performance of a permanent packer with the conveniences of a retrievable packer. The Premier is ideally suited for big-bore completions and multizone stacked-packer completions. Its retrieving options offer new alternatives in high intervention cost applications. We can source from current stock or direct from the manufacturer. View Details

Bag Oil Spill Kit

Ambient Pressure SSSV 5-1/2

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Wax Knife

Experience Unmatched Efficiency in Wellbore Cleaning with HOCA Oil Tools' Wax Knife In the highly specialized field of downhole operations, the quest for efficiency, precision, and reliability is ongoing. At HOCA Oil Tools, we understand the challenges faced by the oil and gas industry and are committed to providing solutions that not only meet but exceed these demands. A shining example of our commitment to innovation and quality is our Wax Knife, a pivotal tool designed for effective wellbore cleaning, particularly in the removal of paraffin buildup. HOCA’s Wax Knife: Tailored for Optimal Wellbore Maintenance The HOCA Wax Knife is expertly engineered to address the common yet critical issue of wax accumulation within wellbores. Crafted from premium materials and designed with precision, our Wax Knife ensures the thorough and efficient removal of wax, thereby maintaining optimal well performance. Ideal for a range of well conditions and compatible with various slick line diameters, the HOCA Wax Knife is a versatile tool essential for maintaining well integrity and flow. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with innovative and reliable downhole solutions. Our Wax Knife exemplifies this dedication, offering a blend of efficiency, effectiveness, and durability that is unmatched in wellbore maintenance. Integrating the HOCA Wax Knife into your downhole maintenance regimen is not just an investment in a tool but an investment in the continued productivity and safety of your operations. Our commitment to excellence ensures that each Wax Knife we deliver meets the rigorous demands of downhole environments and helps our clients achieve their operational objectives with greater ease and efficiency. Discover the difference that a HOCA Wax Knife can make in your downhole maintenance operations. Choose HOCA Oil Tools for your wellbore cleaning needs and experience the highest standards of quality, efficiency, and customer service in the industry. Step up your well maintenance game with HOCA Oil Tools’ Wax Knife – the key to maintaining optimal well performance and operational safety. Contact us today to learn more about how our downhole solutions can revolutionize your operations. View Details

Oclansorb Oil Spill Clean-up Material

Oclansorb is 100% organic and non-toxic material which absorbs oil on contact. This oil absorbent is biodegradable and can be used on land and on water. Oclansorb is made from sphagnum peat moss and will absorb oil and hydrocarbons but not water. It is 15 times more absorbent than clay, translating into one 18 pound bag of Oclansorb being as effective as 450 pounds of clay. This improves the efficiency of clean-up operations as only 1 bag of Oclansorb replaces the shipping and handling of nine 50 pound bags of clay. On land, apply Oclansorb over the area with hydrocarbon contamination and lightly brush the Oclansorb around. The surface can be dry or wet, as Oclansorb does not absorb water. The oil is absorbed on contact, and the captured volumes can be disposed of in landfills or incinerated (as approved by local authorities). On water, cover the oil with Oclansorb as completely as possible. In wavy or flowing conditions, a boom should be used to concentrate the oil. The hydrocarbon will absorb on contact with Oclansorb, and mixing the material to expose more surface area to the hydrocarbons increases absorption. View Details

Silicone Protective Case

Maximize Protection for Your Lighting Equipment with the Wisdom Silicone Protective Case from Provix Provix is excited to introduce the Wisdom Multi-color Silicone Protective Case (model NWI-ZCZ159), a durable and stylish accessory designed for Wisdom Cordless Lights. Available in a vibrant yellow, as well as other colors including black, green, orange, red, and white, this protective case is a perfect blend of functionality and aesthetics. Durable Silicone for Ultimate Protection Crafted from high-quality silicone, the Wisdom Protective Case offers superior protection for your cordless lights. The silicone material is robust and resilient, safeguarding your equipment against impacts, scratches, and daily wear and tear. This ensures your lighting equipment remains in top condition, ready for the demanding environments of mining and construction work. Vibrant Color Selection for Personalization Choose from a variety of colors to personalize your mining equipment. Whether you prefer the visibility of the bright yellow case or a more subdued tone like black or white, there's a color to match your style and preference. The colorful options also make it easier to identify your equipment among others, adding a layer of convenience to your workday. Designed for Wisdom Cordless Lights The Silicone Protective Case is specifically designed to fit Wisdom Cordless Lights, ensuring a snug and secure fit. This compatibility guarantees that the case provides optimal protection while maintaining the functionality and accessibility of your lights. Lightweight and Easy to Use Despite its sturdy construction, the protective case is lightweight and easy to install. Simply slip your Wisdom Cordless Light into the case for instant protection. The silicone material is flexible, allowing for easy application and removal, and does not add bulk to your equipment. Ideal for Mining and Construction Professionals Whether you're a miner, construction worker, or anyone who relies on portable lighting, the Wisdom Silicone Protective Case is an essential accessory. It not only protects your equipment but also adds a personal touch to your professional gear. Get Your Wisdom Silicone Protective Case Today Elevate the durability and style of your lighting equipment with the Wisdom Silicone Protective Case, available now at Provix. Visit our website at www.provix.net to choose from the array of colors and learn more about our range of high-quality mining equipment and accessories. View Details

USB Charger Cord

Revolutionize Your Charging Experience with the Wisdom USB Charger Cord – Exclusively from Provix Provix is delighted to introduce the Wisdom USB Charger Cord, a uniquely designed and highly versatile charging solution for your lighting equipment. This self-designed magnetic USB charger is an epitome of convenience and efficiency, making it a must-have accessory for professionals and individuals alike. Innovative Magnetic USB Connectors The standout feature of this charger cord is its magnetic USB connectors. These connectors are specifically designed to easily and securely attach to your devices, ensuring a stable and reliable charging connection. This user-friendly design significantly simplifies the charging process, making it hassle-free. Flexible and Wide-Ranging Applications With a length of 1 meter, the Wisdom USB Charger Cord offers ample flexibility in various settings. Whether you're at home, in the office, a reading room, a hotel, or even in a vehicle, this charger cord extends the application field of your devices. Its versatility makes it suitable for any location with a power source or USB port. High-Quality Material for Durability Crafted from durable materials, the charger cord features a magnetic connector that guarantees longevity and consistent performance. The quality of construction ensures that the charger cord can withstand regular use in different environments. Simple and Efficient Charging Using the Wisdom USB Charger Cord is straightforward: 1. Connect the magnetic head with the multi-purpose lamp charging interface. 2. Connect the other end (USB connector) to a USB port for charging, or to an optional WISDOM power adapter (available separately) for enhanced flexibility. This easy-to-follow process ensures your devices are charged efficiently and ready for use whenever you need them. Elegant Design The charger cord's sleek white color not only adds an aesthetic touch but also makes it easy to locate among your gear. Its elegant design complements any setting, from professional environments to personal spaces. Ideal for Everyday Use Whether you need a reliable charging solution for your professional equipment or personal devices, the Wisdom USB Charger Cord is an excellent choice. Its combination of innovative design, ease of use, and versatility makes it a valuable addition to your tech accessories. Get Your Wisdom USB Charger Cord Today Experience the convenience and efficiency of the Wisdom USB Charger Cord. Available now at Provix, this charger cord is the perfect solution for keeping your devices powered and ready to go. Visit www.provix.net to learn more and make your purchase. View Details

Lead Impression Block

X-over Protector

BMS Versol D

Introducing BMS VerSol D: The Safer and More Environmentally Conscious Solvent Cleanstream is excited to introduce BMS VerSol D, the perfect replacement for harmful solvents such as THF, NMP/NEP, and chlorinated solvents. Our product is designed to provide a more sustainable and safer alternative for your cleaning needs. BMS VerSol D is a chemical product that is perfect for those looking for a more environmentally conscious solution to their cleaning needs. Our solvent is a green Xylene replacement that is much safer to use than traditional solvents that contain BTEX. In addition to being safer for the environment, BMS VerSol D is also highly effective in cleaning corrosion, inhibition, and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our product is also a great replacement for BTEX solvents in well cleanup operations. With BMS VerSol D, you can achieve the same cleaning performance without any of the harmful effects of traditional solvents. By choosing BMS VerSol D, you are taking a significant step towards reducing your carbon footprint and contributing to a cleaner and greener planet. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. At Cleanstream, we are committed to creating a sustainable future, and BMS VerSol D is just one of the many ways we are working towards that goal. So why wait? Make the switch to BMS VerSol D today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol D. View Details

FXE WR-SCSSSV 4-1/2 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

PRV repalcement Turbine

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success. View Details

TIG Torch 200 AMP Gas Valve Air Cooled (26 series)

Unleash Precision Welding with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series)! For the oil and gas industry, precision welding is not just a requirement; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our TIG Torch 200 AMP Gas Valve Air Cooled (26 Series) is a testament to our commitment to excellence and innovation. Unmatched Flexibility: When it comes to hard-to-reach applications, our TIG Torch 200 AMP is the ultimate solution. The torch body can be bent to virtually any position, ensuring quick and easy access to even the most difficult positional welds. No more struggling with tight spaces; our torch provides unmatched flexibility, making precision welding a breeze. Revolutionary Cooling Technology: We've harnessed the power of Force Cooling Technology to maximize the performance and longevity of our torch. Highly effective passages and wells force cool the collet, resulting in a cooler running torch with increased conductivity and extended consumable life. Weld with confidence, knowing that our torch can handle even the most demanding applications. Heat Zone Isolation for Superior Performance: Our torch employs Heat Zone Isolation Technology, where transferred heat is isolated by a unique external barrier. Conducted heat is further isolated using large air pockets within the torch body structure. The result? Cooler running torches with increased power to weight performance ratios. Experience welding at elevated power levels without compromising performance. Superior Wear Parts for Increased Arc Time: Every component of our torch is designed for superior performance, delivering increased arc time and lower overall production costs. From push-on/easy grip ceramics to one-piece collet/collet body for hassle-free use, our torch ensures 100% ceramic and electrode alignment with the Heat Zone Isolator. Optional large gas lens increases the gas envelope for even more efficiency. Advanced Torch Bodies and Back Caps: Experience a step-change in performance levels with our torch bodies and back caps. Our revolutionary cooling and heat zone isolation techniques result in cooler running torch bodies at elevated power levels. These cooler running components increase wear parts' life expectancy, giving you an edge in productivity. Key Benefits for Enhanced Performance: • Utilizes air gap technology for cooler running handles • Hard and soft material elements for an effortless grip • Infinite adjustment of welding parameters from the torch handle • Optional integrated handle readout displays all welding and machine parameters in "real-time" Clever Cable Systems for Optimal Efficiency: Our cable systems are cleverly designed to combine flexibility, durability, and top-notch performance. Rapid fit and modular rear-end systems ensure easy reconfiguration of power input, gas hose, and control lead terminations. Superior-grade rubbers guarantee cable termination integrity and hose package longevity, tested to withstand over 1 million flexes. Elevate Your Welding Experience: Experience the difference with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series). Achieve precision welding with ease, no matter how challenging the application. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. When it comes to welding, choose Canaweld for the ultimate in quality, flexibility, and performance. Elevate your welding experience and take your oil and gas projects to new heights of success with Canaweld's cutting-edge welding accessories. View Details

ESP Straight Pull 7" Packer

The Ballycatter Model WC-ESP Straight Pull 7” Packer is a hydraulic-set production packer built for ESP completions in 7” casing, offering secure wellbore isolation and efficient ESP deployment. Its pass-through section ensures uninterrupted power delivery to the ESP unit, while the bi-directional slips anchor the packer against pressure fluctuations and tubing movement. Designed for high-pressure and high-temperature wells, its single-piece mandrel construction and Acner Array Packing Element provide exceptional durability and sealing reliability.

The WC-ESP Straight Pull 7” Packer is set hydraulically by pressurizing the tubing against a plugging device, locking the packer in place for long-term performance. The straight pull retrieval mechanism enables fast and hassle-free removal, reducing intervention time and operational costs. Compatible with all major cable pack-off or feed-thru devices, this packer is a versatile, high-performance solution for ESP completions in medium-sized casing applications.

View Details

Gauge Root Valve – Male x Female – Lagging Extension – 1/4”, 1/2”, 3/4” – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension is designed for controlling and isolating pressure instruments on pipelines where insulation is applied. The lagging extension allows the valve handle to extend above the insulation, ensuring operators can access and operate the valve safely without removing or damaging the insulation. This design maintains the integrity of the insulated pipeline while providing reliable valve operation.

The valve is manufactured to ASME B16.34 standards and meets ISO 9001, PED, and ATEX requirements, ensuring quality and compliance for industrial and oil and gas applications. It is rated for a standard working pressure of 6000 PSI and can be supplied for higher pressures upon request. The temperature range of the valve spans from -50°C to 230°C, with higher temperature options available with graphite sealing. A metal-to-metal body bonnet seal provides high-pressure and high-temperature sealing without the need for O-rings.

The valve features a back-seated stem for added security, a self-centering non-rotating tip for consistent shutoff, and a simple adjustable gland retainer for stable packing. The rolled stem threads and mirror-finished stem through the packing allow smooth operation, reduce packing wear, and provide long-lasting performance. The removable “T” handle and dust cap on the stem further enhance ease of use and protection.

This valve is particularly suitable for applications where pipelines are insulated, allowing for accurate gauge measurement, safe operation, and minimal disruption to insulation.

View Details

2 3/8" L80 Yellowband Tubing Hydril 533"

This connection is fully interchangeable with: Wedge 503® - 2.375 in. - 0.19 (4.70) in. (lb/ft) Wedge 533® - 2.375 in. - 0.218 (5.30) / 0.254 (5.95) / 0.295 (6.60) / 0.336 (7.45) in. (lb/ft) Wedge 563® - 2.375 in. - 0.19 (4.60) / 0.218 (5.10) / 0.254 (5.80) / 0.295 (6.60) / 0.336 (7.35) in. (lb/ft) View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

Check Set Tool for Slickline

Secure and Optimize Your Downhole Operations with HOCA Oil Tools' Check Set Tool In the intricate world of oil and gas exploration and extraction, securing and optimizing downhole components are pivotal for operational success and safety. HOCA Oil Tools, a leader in downhole slick line tool solutions, presents the Check Set Tool, an innovative product designed to ensure the correct setting and functionality of downhole locks and plugs. This specialized tool is an essential part of maintaining well integrity and efficiency, demonstrating our commitment to providing high-quality, reliable downhole solutions. HOCA’s Check Set Tool: Ensuring Downhole Safety and Efficiency The Check Set Tool by HOCA Oil Tools is engineered with precision, built to verify the accurate setting of lock mandrels and other downhole locking devices. Crafted from robust materials suited for the harsh downhole environment, this tool is designed for reliability and durability, ensuring that your downhole operations run smoothly and securely. Elevate Your Downhole Tool Setting with HOCA Oil Tools At HOCA Oil Tools, we understand the challenges and risks associated with downhole operations. Our Check Set Tool is a reflection of our dedication to innovation, quality, and customer service, offering a solution that addresses the critical need for secure and efficient downhole tool settings. Integrating the HOCA Check Set Tool into your downhole operations not only enhances operational security and efficiency but also demonstrates a commitment to the highest standards of well integrity and safety. Our experienced team is dedicated to supporting your operational success, providing tools and solutions that meet the demanding conditions of the oil and gas industry. Invest in the HOCA Check Set Tool and experience the confidence and efficiency that come with knowing your downhole components are correctly set and secured. Choose HOCA Oil Tools for all your downhole needs and join the ranks of satisfied customers who trust our products to keep their operations running smoothly and safely. View Details

SMAW Welder MMA 201

Powerful, Portable, and Versatile: Introducing the MMA 201 Welding Machine At Canaweld, we take pride in providing welders with top-notch equipment that delivers high-quality performance across a broad range of metals and thicknesses. Designed with the construction and oil & gas industries in mind, we are excited to present the MMA 201 - a welding machine that exceeds expectations in power, versatility, and durability. Powerful Performance on the Go The MMA 201 is your ultimate welding companion, offering the best-in-class duty cycle in its category. With a maximum current of 200A and the ability to deliver 160A with a 100% duty cycle, this welding machine provides the extra power you need to tackle challenging welding tasks all day long. Whether you're on a construction site or working in the oil & gas industry, the MMA 201 has got your back. Portable and Lightweight Design We understand the importance of mobility for welders on the go. That's why we've designed the MMA 201 to be portable and lightweight, making transportation effortless. The included carrying belt ensures ease of movement, allowing you to take this welding powerhouse wherever your work demands. Unmatched Versatility The MMA 201 is more than just a Stick Welding machine. It also excels in TIG welding with a lift start, providing you with the versatility to take on a wide range of welding applications. Whether you're working with steel, stainless steel, or aluminum, the MMA 201 delivers excellent arc characteristics with the most common rods up to 5/32 inches. Built to Withstand the Toughest Conditions The MMA 201 is tested in extreme conditions, proving its resilience in temperatures up to 104°F (40°C). Its rugged construction and large size Dinse style welding connectors ensure durability and reliability even in the harshest environments. Advanced Features for Effortless Welding With automatic hot start, arc force function, and electrode anti-sticking capabilities, the MMA 201 provides an unmatched welding experience. It's fan-cooled and thermally protected against overheating, safeguarding your equipment for long-lasting performance. Experience Excellence with Canaweld When you choose the MMA 201, you choose excellence backed by Canaweld's comprehensive 3-year warranty. Trust in a welding machine that's engineered to exceed your expectations and deliver the power, versatility, and durability you need. Empower your welding journey with the MMA 201 Welding Machine. Elevate your skills, tackle challenging projects, and take your welding to new heights with Canaweld. Your welding success begins with the MMA 201 - Where Power Meets Portability! View Details

Rod Pump of various diameters and stroke lengths to optimize oil production

Sucker rod pumping systems are the oldest and most widely used type of artificial lifting system for oil wells. Sucker-rod pumping is the most widely used artificial lift method for onshore oil wells. Sucker-rod strings transfer the motion from the driving machine on the wellhead to the downhole oil pump. Pump diagnoses are generally conducted through an interpretation of the pump dynamometer graph (pump card). View Details

HP-3 Hydraulic Set High Angle 6 5/8" 28-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details