Ballycatter.ca - Industrial Equipment

Freight Trucks available in multiple countries for various hauling applications

The demand for truck transport continues to grow and companies have realised it is effective to enter into long term contracts with dedicated service providers. Find the best equipment customised for your needs. Truck transportation effectively remains the most direct solution for the transport of goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. Contact us to to discuss the truck you want and what the possibilities are. View Details

Surface Controlled Subsurface Safety Valve FRN 6-5/8 inch

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Subsurface Safety Valve for Injection Wells 5.4 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Injection Valve 4 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Wisdom Cap Lamp KL8M

Revolutionize Your Mining Experience with the Wisdom KL8MS Corded Miner's Cap Lamp from Provix Are you looking for a reliable, powerful, and safe lighting solution for your mining activities? Look no further than the Wisdom KL8MS Corded Miner's Cap Lamp, offered by Provix. This state-of-the-art cap lamp is designed to meet the rigorous demands of underground mining environments, ensuring both safety and efficiency. Unmatched Lighting Performance The KL8MS features a high-capacity 10,400mAh battery, providing a continuous discharging time of 13 hours, ensuring long-lasting performance for extended shifts. Its main light LED, with a working voltage of 3.0V and power of 2.67W, delivers an impressive luminous flux of 430 lm. This powerful lamp illuminates your work area with a stunning 18,000 lx lighting degree, making it one of the brightest on the market. Built to Last Durability is key in mining equipment, and the KL8MS doesn’t disappoint. With a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours, this lamp is built to endure. The battery life is equally impressive, offering 1,200 cycles under reasonable working conditions. Safety First Safety is paramount in mining, and the KL8MS cap lamp is designed with this in mind. It’s explosion-proof, complying with ATEX GROUP II standards, and boasts an IP68 waterproof rating. The short circuit protect time of less than 320 μs adds an extra layer of safety, ensuring peace of mind in challenging conditions. Convenient and Comfortable Design Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL8MS is designed for comfort and ease of use. The battery box measures a compact 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), making it unobtrusive and comfortable to wear during long shifts. Easy and Efficient Charging The KL8MS is rechargeable via USB, offering a convenient charging solution. With a charging time of only 5.5 to 10 hours, the lamp is quickly ready for use, minimizing downtime. Get Yours Today! Experience the superior performance and safety of the Wisdom KL8MS Corded Miner's Cap Lamp. Visit Provix at 3 Greengage Road, New Lowell, ON L0M 1N0, call us at +1 (888) 434-0253, or email sales@provix.net. For more information, visit our website at www.provix.net. Elevate your mining operations with the Wisdom KL8MS, your ultimate lighting solution. View Details

Protector\'s Dismantle Bench

Attention all oil industry businesses in need of high-quality workbenches for disassembling cross-coupling protectors – Sivam has got you covered! Our workbenches are specifically designed for the task of disassembling cross-coupling protectors, ensuring that your team can work safely and efficiently. At Sivam, we pride ourselves on our commitment to using only the highest quality materials in our products. Our workbenches are built to last, with exceptional durability and reliability that ensures your team can work with confidence. We understand that precision and accuracy are crucial when it comes to disassembling cross-coupling protectors. That's why our workbenches are designed to provide a stable and secure platform for the task. Our workbenches are also equipped with a range of additional features to help your team work more efficiently and effectively. Our team at Sivam understands the importance of meeting our clients' needs. That's why we work closely with our customers to design workbenches that meet their exact specifications. We take pride in providing exceptional customer service, and our commitment to quality is second to none. When it comes to disassembling cross-coupling protectors, Sivam is the name you can trust. Choose us for all your workbench needs and take your operations to the next level. Contact us today to learn more about our products and services and see how we can help you get the job done right! View Details

HP-3 Hydraulic Set High Angle 6 5/8" 28-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Wisdom EX Cap Lamp

10-3/4 Annulus Safety Valve

The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature View Details

7" Mech-2 Double Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Wrenches for professional maintenance of industrial equipment

A wrench ensures the workability of the object so that it continues to work as fast and effectively as before. It is basically used to provide a strong grip; it is also known as a spanner. Using a wrench is extremely easy. A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt. View Details

ROV Backplate

Unleashing the Full Potential of the Lanai ROV with M0020 Backplates We are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with us today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Lanai ROV with M0020 Backplates for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, we stand as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean. View Details

Bigbore Wireline Retrievable Surface Controlled Subsurface Safety Valve 4.5 inch

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

R-3 Double Grip Retrievable Packer

The R-3™ packer is a versatile production packer intended for a broad range of production applications. It is a compression-set packer, suitable for stimulation and treating applications in a double-grip configuration. Applications in which excessive bottomhole pressures have been depleted, a single-grip version can be used as an economical production packer. The R-3 single-grip retrievable-casing packer is set with one-fourth-turn right-hand rotation and can be released with straight pickup. We can source from current stock or direct from the manufacturer. View Details

HDI 2200 Choke Position Indicator System

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

View Details

M-KWIK Control Line and Cable Protector

General Mechanical Slickline Service

InWaTec Combined: Precision at Depth with General Mechanical Slickline Services In the demanding arena of oil and gas well maintenance, precision is not just a virtue—it's a necessity. At InWaTec Combined, we provide General Mechanical Slickline services that bring precision to the heart of your well operations. Our slickline services deliver targeted maintenance solutions, assuring that performance, integrity, and productivity remain at the forefront of your downhole activities. The Role of Slickline in Downhole Maintenance Slickline is the unsung hero of well servicing, a slender thread of robustness, lowering essential tools into the depths of oil and gas wells to execute critical maintenance tasks. It is the conduit for precision, the means by which tools are delivered to the precise downhole location where they are needed. Why Choose InWaTec Combined's Slickline Services? Expertise at Every Turn: Our slickline operators are seasoned experts, with the skill to navigate complex downhole environments, ensuring that every tool is deployed with accuracy. Versatile Tool Deployment: From routine maintenance to emergency interventions, our slickline services cater to a diverse range of downhole needs, delivering the right tool to the right place at the right time. Streamlined Operations: Efficiency is key in downhole operations, and our slickline services are designed to minimize downtime, streamline processes, and maintain the peak performance of your wells. Safety and Precision Combined: At InWaTec Combined, we balance the need for operational precision with an uncompromising commitment to safety, ensuring that every slickline operation upholds the highest standards. Tailored Solutions for Downhole Challenges Every well presents its own set of challenges, and InWaTec Combined's General Mechanical Slickline services are crafted to meet them head-on. We provide tailored solutions, customizing our approach to fit the unique needs of your well, ensuring that maintenance tasks are carried out with precision and care. Advanced Technology for Optimal Results We leverage the latest in slickline technology, utilizing advanced materials and innovative techniques to enhance the reliability and effectiveness of our services. Our commitment to technological advancement means that we're always at the cutting edge, providing services that are not just current but future-ready. Your Partner in Well Maintenance Choosing InWaTec Combined for your slickline needs means selecting a partner dedicated to the success of your well operations. Our General Mechanical Slickline services are a reflection of our promise to deliver excellence in every aspect of our work, from the initial deployment of tools to the completion of maintenance tasks. Conclusion: Your Well's Performance, Our Commitment In conclusion, InWaTec Combined's General Mechanical Slickline services are essential for maintaining the high performance and integrity of your oil and gas wells. With our focus on precision, efficiency, and safety, we ensure that your maintenance operations are performed to the highest standards. Trust in the expertise and dedication of InWaTec Combined to keep your wells operating smoothly, safely, and efficiently. View Details

6″ Butterfly Bleed Air Valve

The 6″ Butterfly Bleed Air Valve is designed to regulate the flow of compressed bleed air from the compressor section of large gas turbines, such as the LM2500. This valve uses a butterfly-shaped disc permanently attached to a robust shaft, allowing precise control over airflow to reduce pressure and temperature within the turbine system.

With an effective flow area of 19.1 square inches max, this valve accommodates higher volumes of bleed air, making it suitable for turbines with greater airflow requirements. It features a fast response time—less than 320 milliseconds for a full stroke—ensuring timely adjustments to changing operating conditions. The valve’s bearings are engineered for high cycle service, providing durability and reliability even under frequent opening and closing cycles.

The 6″ valve helps protect turbine components by managing thermal loads and maintaining optimal compressor performance, which in turn improves overall turbine efficiency and extends equipment life. It is commonly used in oil and gas applications where maintaining safe, efficient, and reliable turbine operation is critical. This valve also serves as a drop-in replacement in existing turbine systems, requiring no hydraulic or electrical modifications, simplifying installation and reducing downtime.

View Details

Tubing End Locator

Streamline Your Downhole Operations with HOCA Oil Tools' Tubing End Locator In the evolving landscape of the oil and gas industry, precision and efficiency are paramount. As specialists in downhole slick line tools, HOCA Oil Tools is proud to present our Tubing End Locator, a precision-engineered tool designed to enhance the effectiveness and efficiency of downhole operations. Understanding the critical nature of accurate well measurements and operations, our Tubing End Locator stands out as a must-have tool for any downhole toolkit. HOCA's Tubing End Locator: Precision Engineered for Optimal Efficiency The HOCA Tubing End Locator is specifically designed to accurately identify the end of the tubing in wellbores, a crucial step in various downhole operations. Built with high-grade materials and engineered to withstand harsh downhole environments, our Tubing End Locator ensures reliable performance and precise measurements, aiding operators in conducting seamless downhole interventions and maintenance. Experience the HOCA Difference in Downhole Innovation At HOCA Oil Tools, we are committed to driving innovation and excellence in the oil and gas industry. Our Tubing End Locator exemplifies this commitment, providing operators with a reliable, accurate, and efficient tool that streamlines downhole operations and enhances well integrity. Integrating our Tubing End Locator into your downhole operations not only signifies a commitment to accuracy and efficiency but also positions your operations at the forefront of technological advancement. With HOCA Oil Tools, you gain more than just a product; you acquire a partner dedicated to supporting your operational success with cutting-edge solutions and expert service. Choose HOCA Oil Tools' Tubing End Locator for your downhole needs and join the ranks of satisfied clients who trust our products to deliver unmatched performance and results. Elevate your downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency. View Details

LM2500+G4 DLE U PT Gas Turbine

The LM2500+G4 DLE U PT is a versatile gas turbine designed for a wide range of applications, including onshore and offshore power generation, gas pipeline compression, and LNG compression. It features Dry Low Emissions (DLE) technology, which reduces nitrogen oxide (NOx) emissions to as low as 25 parts per million by volume (ppmv) at 15% oxygen, meeting stringent environmental standards.

In the oil and gas industry, production rates are closely linked to available horsepower. The LM2500+G4 DLE U PT offers higher power output, high reliability, and a lower initial cost per kilowatt, making it a cost-effective solution for energy-intensive operations.

This turbine has proven its capability to operate reliably in extreme ambient conditions, with running data demonstrating performance at temperatures as low as -50°F and start-up capability down to -40°F. This wide operational temperature range ensures dependable service in harsh environments.

Fuel flexibility is a key strength of the LM2500+G4 DLE U PT. It can seamlessly switch between various fuels—lean treated natural gas, rich offshore gas, propane, or diesel—without shutting down or losing efficiency. This flexibility supports energy security, allowing continuous operation even if the natural gas supply is interrupted. Additionally, the turbine can be adapted to burn alternative fuels like bioethanol and naphtha, further enhancing fuel options.

A notable advantage of aeroderivative gas turbines like the LM2500+G4 DLE U PT is their ability to operate on hydrogen blends, which produce no carbon emissions when combusted. Both new turbines and existing units can be converted for high hydrogen fuel use, supporting decarbonization goals.

Moreover, the LM2500+G4 DLE U PT is truly dual-fuel capable, able to switch from 100% natural gas to 100% propane without the need for pilot fuels. This contrasts with dual-fuel reciprocating engines, which typically require about 5% diesel during gas operation, increasing costs and emissions. The LM2500+G4 DLE U PT’s fuel flexibility, emission controls, and robust design make it a reliable and efficient choice for demanding mechanical drive and power generation needs in the oil and gas sector.

View Details

Well Flow Control Valve Direct Response 4.36 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Diffuser Lens #1

Enhance Your Vision with the Wisdom Diffuser Lens #1 – Available Now at Provix Provix is excited to introduce the Wisdom Diffuser Lens #1 (model NWI-WLOA-LENS1), a specialized accessory designed to enhance the functionality of your cap light. Ideal for mining, construction, and other industries where clear, wide-range vision is essential, this diffuser lens is a must-have addition to your equipment. Optimized Lighting for Various Environments The Diffuser Lens #1 is expertly designed to fit Cap Light models 2, 3, and 4. It spreads light over a wide area, providing a soft, diffused beam that is perfect for illuminating large spaces without the harshness of direct light. This feature is especially beneficial in environments where clear, broad visibility is crucial for safety and precision. Versatile and Easy to Attach This lens is incredibly easy to attach and use. It seamlessly fits onto your existing Wisdom cap lights, transforming the beam into a more diffused and wide-ranging light. This versatility makes it an excellent tool for various professional and recreational activities, including mining, construction, outdoor adventures, and emergency response. Durable and Reliable Like all Wisdom products, the Diffuser Lens #1 is built to last. Its durable construction ensures it can withstand the rigors of tough working conditions, providing reliable performance time and time again. A Must-Have for Enhanced Visibility Whether you're working underground or in low-light conditions, the Wisdom Diffuser Lens #1 enhances your visibility, making your tasks easier and safer. It's an essential accessory for anyone who relies on cap lights for their work. Get Your Wisdom Diffuser Lens #1 Today Upgrade your cap light with the Wisdom Diffuser Lens #1 from Provix. Visit our website at www.provix.net to discover more about this unique product and explore our wide range of mining equipment designed to enhance your work experience. View Details

Alternative Energy Solutions

Unlocking Profitable Alternative Energy Solutions: Mobile, Reliable, and Environmentally Responsible Lovat Gas Solutions is your trusted partner in developing profitable alternative energy solutions. We understand the importance of coordinating a dedicated team of experts and resources to deliver innovative, mobile, reliable, and environmentally responsible solutions that assist our clients and partners in their transition to new energy paradigms. With a key focus on safety, we are committed to helping you achieve your energy goals while maximizing profitability. Why choose Lovat Gas Solutions for your alternative energy needs? 1. Coordinated Expertise: Our team of skilled professionals brings together expertise from various disciplines to provide a comprehensive approach to alternative energy solutions. We coordinate the efforts of our talented individuals and resources to ensure seamless execution and deliver high-quality results. 2. Mobile Solutions: We recognize the importance of mobility in the ever-evolving energy landscape. Lovat Gas Solutions offers mobile energy solutions that can be easily deployed and adapted to your specific requirements. Whether it's mobile power generation, off-grid solutions, or energy storage, we have the flexibility to meet your needs. 3. Reliability: We understand that reliability is a critical factor in the success of your alternative energy projects. Our commitment to delivering reliable solutions is ingrained in every aspect of our work. You can rely on our expertise and experience to provide solutions that consistently meet your energy demands. 4. Environmental Responsibility: At Lovat Gas Solutions, we prioritize environmental responsibility in all our endeavors. Our alternative energy solutions are designed to minimise carbon emissions, reduce environmental impact, and contribute to a sustainable future. We take pride in helping our clients transition to cleaner energy sources with a focus on sustainability. Partner with Lovat Gas Solutions to unlock profitable alternative energy solutions. We are dedicated to understanding your unique energy needs, designing innovative solutions, and delivering tangible results. Whether you require short-term solutions or long-term strategies, our team is here to support your transition to new energy frontiers. Contact us today to discuss your alternative energy goals. Let our experienced team guide you through the process, providing you with mobile, reliable, innovative, and environmentally responsible solutions that drive profitability and contribute to a greener future. Trust Lovat Gas Solutions to be your partner in successful alternative energy initiatives. View Details

Needle Valves Square Body Series – Female x Female – 1/4", 3/8”, 1/2”, M20 x 1.5, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Square Body Needle Valve Female x Female is engineered for precise flow control in high-pressure fluid systems commonly found in the oil and gas industry. Its design features a robust square-shaped body, which provides stability during installation and operation, reducing the risk of leaks and mechanical stress. The female x female configuration allows the valve to connect two female-threaded pipes or instrumentation components directly, eliminating the need for additional adapters and simplifying system layout.

The valve operates with a fine-threaded stem that provides smooth, accurate regulation of fluid flow, enabling controlled start, stop, and throttling functions. A metal-to-metal body bonnet seal ensures reliable sealing at high pressures and temperatures, while the back-seated stem and self-centering tip deliver consistent, leak-free shutoff.

These valves are suitable for a range of applications, including instrumentation, process monitoring, sampling, and control systems, where precise flow control and reliable operation are critical. The square body design also facilitates easy wrench access and torque application, making installation and maintenance straightforward in complex piping arrangements.

View Details

5 Valve Manifolds R Type – Pipe to Pipe 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 5 Valve Manifold R Type – Pipe to Pipe is designed for high-pressure oil and gas applications where differential pressure transmitters or gauges need to be connected, calibrated, and maintained safely. This manifold provides two block valves, two equalizer valves, and one bleed valve in a single assembly, allowing operators to isolate the transmitter, equalize pressure between impulse lines, and safely vent pressure when required.

The R Type configuration is particularly suitable when multiple valve functions are needed in a compact layout. By combining all five valves in one manifold, it reduces the number of separate components, minimizes potential leak points, and saves installation space compared to using individual valves.

This manifold is ideal for environments where reliability and safety are critical, offering 6000 PSI standard working pressure, metal-to-metal sealing for high-pressure and temperature performance, and compatibility with NACE MR 01 75 materials. Its design ensures smooth operation, low torque handling, and long-term durability, making it the preferred choice for complex measurement and control systems in oil and gas operations.

View Details

Storm Choke 2-1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

PRV repalcement Turbine

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success. View Details

7" HP-6 Hydraulic Set High Angle Production Packer for 20-26 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Pneumatic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Oclansorb Oil Spill Clean-up Material

Oclansorb is 100% organic and non-toxic material which absorbs oil on contact. This oil absorbent is biodegradable and can be used on land and on water. Oclansorb is made from sphagnum peat moss and will absorb oil and hydrocarbons but not water. It is 15 times more absorbent than clay, translating into one 18 pound bag of Oclansorb being as effective as 450 pounds of clay. This improves the efficiency of clean-up operations as only 1 bag of Oclansorb replaces the shipping and handling of nine 50 pound bags of clay. On land, apply Oclansorb over the area with hydrocarbon contamination and lightly brush the Oclansorb around. The surface can be dry or wet, as Oclansorb does not absorb water. The oil is absorbed on contact, and the captured volumes can be disposed of in landfills or incinerated (as approved by local authorities). On water, cover the oil with Oclansorb as completely as possible. In wavy or flowing conditions, a boom should be used to concentrate the oil. The hydrocarbon will absorb on contact with Oclansorb, and mixing the material to expose more surface area to the hydrocarbons increases absorption. View Details

Wireline Entry Guide

A wireline entry guide is a device that is used to guide a wireline into a wellbore or oil and gas well. It is used to direct the wireline into the wellbore in a controlled manner. View Details

CXS Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

Geotechnical exploration rig

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT View Details

Surface Heater

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Gas Supply

Reliable Gas Supply Solutions: Your Peace of Mind with Lovat Gas Solutions When you reach out to Lovat Gas Solutions, it's because you have a pressing need for gas. We understand the urgency and importance of resolving this issue promptly and efficiently. That's why we take our job seriously – to provide you with a gas supply solution that not only solves your immediate problem but also ensures a seamless experience without creating further headaches for your business. At Lovat Gas Solutions, we pride ourselves on our ability to develop and execute reliable gas supply solutions tailored to your specific application. We prioritize understanding your unique needs and challenges, working closely with you to devise a solution that effectively and consistently meets your requirements. Why choose Lovat Gas Solutions for your gas supply needs? 1. Customer-Centric Approach: Your satisfaction is our top priority. We listen attentively to your concerns, taking the time to understand the intricacies of your gas supply requirements. Our dedicated team is committed to developing and executing a solution that reliably solves your problem without causing additional complications. 2. Reliability: We recognize the critical importance of reliable gas supply for your business operations. With our extensive industry experience and expertise, we ensure that the gas supply solution we provide is dependable, allowing you to focus on your core business activities with peace of mind. 3. Tailored Solutions: We understand that each application is unique, requiring a customized approach. Our team of experts takes a proactive and innovative approach to develop a solution that precisely addresses your gas supply needs. Our goal is to exceed your expectations and provide you with a solution that seamlessly integrates into your existing operations. 4. Seamless Execution: At Lovat Gas Solutions, we believe in delivering on our promises. With meticulous planning, efficient execution, and attention to detail, we ensure a smooth transition from gas supply issues to reliable operations. Our commitment to your success is reflected in our dedication to providing a hassle-free experience. When you choose Lovat Gas Solutions, you choose a partner that takes your gas supply needs seriously. We are dedicated to solving your gas supply challenges without creating further headaches for your business. Contact us today, and let our experienced team develop and execute a reliable gas supply solution that meets your unique requirements. Experience peace of mind with Lovat Gas Solutions as your trusted gas supply partner. View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain is a high-performance isolation and venting solution designed specifically for oil and gas applications. This valve combines two independent ball isolation valves and a centrally located needle drain valve within a single, compact body, ensuring reliable double isolation and safe pressure relief or venting.

Manufactured in compliance with ASME B16.34, API 6D, and ISO 17292 standards, it offers assurance of global quality and safety benchmarks. The design accommodates line sizes ranging from ½” to 2”, with pressure ratings from Class 150 up to Class 2500, making it suitable for both standard and high-pressure operations.

The flange x flange connections provide secure installation and easy integration into piping systems, while the ball x ball configuration guarantees tight shut-off. The needle drain allows for controlled venting, sampling, or pressure equalization, enhancing operational safety and efficiency.

The valve is well-suited for critical applications such as pipeline isolation, meter calibration, instrumentation, and maintenance operations in oil and gas facilities. Its compact, space-saving design reduces potential leak paths compared to conventional multi-valve assemblies, lowering installation costs and improving reliability.

View Details

2" Globe-Style Gas Metering Valve

The 2” Globe-Style Gas Metering Valve is designed to provide precise regulation of fuel gas flow in industrial and aero-derivative gas turbines. Its globe valve design offers excellent throttling capabilities, allowing fine control over fuel delivery to maintain the optimal fuel-to-air mixture necessary for efficient combustion. This precise control is crucial for achieving stable turbine performance, reducing emissions, and optimizing fuel consumption.

Constructed with robust materials, the valve is built to withstand the high pressures and temperatures commonly encountered in gas turbine applications. Its durable design ensures long service life and reliable operation even under demanding conditions. The valve features foolproof electrical cables and connectors, enhancing installation safety and reducing the risk of connection errors.

The valve’s compact size and right-angle configuration facilitate straightforward integration into existing turbine fuel systems. Compared to previous models, this valve is an upgrade due to its improved electrical interface and enhanced durability, which reduce maintenance needs and increase operational reliability.

By accurately controlling fuel flow, the 2” Globe-Style Gas Metering Valve helps prevent issues such as flame instability and combustion inefficiency, contributing to smoother turbine operation and lower maintenance costs. It is widely used across various turbine models, including aero-derivative and small- to mid-frame industrial turbines, where precise fuel metering is critical for maintaining performance and compliance with environmental standards.

View Details

ROV Communications Systems

Stay Connected with Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. We understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration We pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. View Details

Utility Backup Operators

Valve Manifolds 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT is designed to provide a reliable and compact solution for connecting impulse lines to pressure transmitters and gauges. This manifold allows operators to safely isolate instruments from the process for maintenance, calibration, or testing, without the need to shut down the system. The T-type configuration features two valves that control flow to and from the instrument, enabling efficient block, bleed, and vent operations.

The pipe-to-pipe design ensures a direct connection to the piping system, which reduces potential leak points and simplifies installation. It is suitable for high-pressure applications, with a standard working pressure of 6000 PSI and options available for higher pressures. The manifold is built with a metal-to-metal body and bonnet seal for enhanced durability and temperature resistance, with materials that can comply with NACE MR 01 75 standards for corrosion resistance.

Additional features include a removable T-handle for low-torque operation, self-centering non-rotating stems for consistent shutoff, and a dust cap to prevent contamination. Packing is positioned below the stem threads to isolate the threads from the process media, and the stem’s rolled threads provide smooth operation and long life. The manifold is 100% factory tested for leakage and performance, ensuring reliable operation in critical oil and gas applications.

View Details

CSA 120 unit, non-Locking FAST charger rack

Maximize Charging Efficiency with the CSA 120 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to present the CSA 120 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-120BC), a large-scale charging solution designed for operations that demand quick and efficient charging of a high volume of equipment. This charger rack is perfect for extensive mining operations, large construction sites, and industrial settings where time and space are of the essence. High-Capacity, Rapid Charging The CSA 120 Unit Charger Rack is engineered to meet the needs of large teams, offering rapid charging times of just 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This fast charging capability is crucial for operations where equipment must be ready for continuous use, ensuring minimal downtime and maximum productivity. Designed for Space Efficiency Despite its large capacity, the CSA charger rack is designed to be space-efficient. It’s an ideal solution for organizations that need to manage a significant number of devices but have limited space. This single-sided charger rack can be easily placed in equipment rooms or centralized charging stations, optimizing your workspace. Easy Access and User-Friendly The non-locking feature of this charger rack offers easy and quick access to all charging ports, making it straightforward to manage multiple devices. This design is particularly beneficial in dynamic work environments where quick equipment turnaround is essential. Durable and Reliable for Industrial Use Constructed with durability in mind, the CSA 120 Unit Charger Rack is built to withstand the demanding conditions of mining and industrial environments. Its robust construction ensures it can provide reliable performance over time, making it a smart investment for large-scale operations. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and equipment rental providers who need to charge a substantial number of devices efficiently. Its high capacity and fast charging capabilities make it an indispensable tool for operations of considerable size. Upgrade Your Charging Station Equip your operation with the Wisdom CSA 120 Unit Non-Locking FAST Charger Rack from Provix. Visit our website at www.provix.net to discover more about this high-capacity, efficient charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions. View Details

Gas Turbine LM2500+ DLE 50Hz 1x CC

The LM2500+ DLE in a 1x1 combined cycle configuration—one gas turbine, one heat recovery steam generator (HRSG), and one steam turbine—delivers significantly higher efficiency, exceeding 50% in combined cycle mode.

Designed for high thermal efficiency, fast start capability, and reduced emissions, the LM2500 family is widely used across onshore and offshore environments, including industrial plants, pipeline stations, CHP systems, and utility-scale power production.

The DLE combustion system enables the LM2500+ to maintain low NOx and CO emissions without the need for water or steam injection—simplifying operations and reducing water-related maintenance.

Key features include:

Triple annular combustor design for even temperature distribution and lower emissions across the power range
Electrically actuated DLE fuel valves replacing traditional electro-hydraulic SAC valves for better control
75 pre-mixers in 30 external modules, creating a consistent lean fuel/air mixture
NOx emissions ≤15–25 ppm and CO emissions ≤25 ppm (on natural gas, full load)

With fast ramp-up—achieving base load from cold start in under five minutes—the LM2500 is an ideal choice for fast-start and cycling applications. This performance makes it well suited to dynamic grid environments and industrial use cases requiring quick responsiveness.

View Details

Structured Cabling

Structured Cabling by Nulux Network Solutions: The Bedrock of Your Resilient Network Infrastructure in the Oil and Gas Industry In the intricate and unrelenting realm of the oil and gas industry, the backbone of successful, uninterrupted operations rests on a sturdy network infrastructure. Not merely a conduit for communication, but a veritable lifeline that ensures every unit, every device, and every system communicates seamlessly, securing the continuous flow of vital data across every echelon of your business. This is where Nulux Network Solutions champions your endeavors through our unparalleled expertise in Structured Cabling. Nulux Network Solutions: Your Harbor in the Tempest of Network Demands Your venture into the industrious domains of energy extraction and refinement is formidable, laden with challenges that demand a network just as robust and reliable as the spirited teams operating within. Nulux, with a lauded heritage of over two decades, curates tailored copper cabling networks, ensuring that your network infrastructure stands unwavering amidst operational rigors. While our specialization permeates various strands of telecommunications and networking, structured cabling, particularly utilizing copper, becomes a focal point for businesses that demand: High-Bandwidth Transmission: Facilitating transmissions up to 10 Gbps, ensuring your data flows unrestrained. Reliability: A steadfast performance, ensuring your operations are never hampered by network downtimes. Cost-Effectiveness: A pragmatic solution that assures optimal performance without burdening operational costs. Copper Cabling by Nulux: The Confluence of Flexibility, Durability, and Affordability Structured cabling, particularly utilizing copper, furnishes your business with a network that is not just remarkably flexible, easily terminated, and reliable, but also phenomenally durable, ensuring that the infrastructure remains unfazed amidst the most demanding operational scenarios. Nulux enhances this inherent virtue of copper cabling by ensuring: Holistic Network Solutions: From the embryonic stages of design and planning to installation and life cycle support. Upgrades & Evolution: Ensuring your network is never obsolete, perpetually evolving in tandem with technological advancements. Tailored Solutions: Customizing solutions that cater explicitly to your voice, data, and video service requirements, ensuring no aspect of your operations is ever compromised. Immerse Your Operations in a Cocoon of Network Security and Reliability Navigating through the complexities of DCS network upgrades and deploying copper cabling systems, encompassing telephone, ethernet, coax, and hybrid networks, Nulux has not just crafted but meticulously refined our approach towards network solution delivery. Our commitment towards delivering high-quality, high-performance networks at affordable rates has been unwavering and resolute. Steer Your Business Towards Operational Excellence with Nulux Your business, deeply embedded in the vital sectors of energy, seeks more than just a service provider. It seeks a partner that comprehends the profundity of operational demands and curates solutions that are not merely effective but exemplary. Nulux Network Solutions invites you to experience a partnership where your network demands are met with solutions that are not merely about connectivity but about ensuring your operational pulse never falters. Reach out to us today, and let’s architect a network that becomes the silent, steadfast guardian of your operations, ensuring every bit of data traverses with reliability, every communication occurs seamlessly, and your business thrives amidst the operational challenges of the energy sector. View Details

Check Valve Poppet Type – Male x Female 1/2" NPT – 6000 PSI – ISO 9001

The 1/2" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism provides fast response and a positive seal under pressure, protecting pipelines, pumps, and equipment from reverse flow and pressure fluctuations.

The 1/2" size is suitable for medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required. Male × female connections enable secure inline installation and integration into existing piping systems without additional fittings, reducing potential leak points and simplifying system layout.

The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adaptation to system requirements. Construction materials include corrosion-resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures quality and material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.

View Details

Shifting Tools for Downhole Tools

Streamline Your Downhole Operations with HOCA Oil Tools' Internal Fishing Neck Pulling Tools In the constantly evolving oil and gas industry, having the right tools for specific downhole tasks can significantly enhance operational efficiency and safety. HOCA Oil Tools specializes in providing such solutions, and our Internal Fishing Neck Pulling Tools are a prime example. These tools are meticulously engineered for the safe and efficient retrieval of downhole equipment, ensuring operations proceed smoothly without unnecessary downtime or risk. HOCA's Internal Fishing Neck Pulling Tools: Engineered for Precision and Reliability Designed to latch onto internal fishing necks of downhole tools and equipment, HOCA Oil Tools' Internal Fishing Neck Pulling Tools offer unmatched precision and reliability. These tools are integral for the retrieval process, providing a secure grip without damaging the wellbore or the equipment being retrieved. Constructed from high-quality materials and designed to meet rigorous industry standards, our pulling tools ensure successful operations under a variety of downhole conditions. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Internal Fishing Neck Pulling Tools means opting for a blend of quality, innovation, and support designed to meet the specific needs of modern downhole operations. Our commitment to excellence ensures that our tools not only meet but exceed the rigorous demands of the oil and gas industry. Integrating our Internal Fishing Neck Pulling Tools into your downhole operations translates into enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to your success, offering cutting-edge solutions and unparalleled service. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who trust our Internal Fishing Neck Pulling Tools for their critical operations. Elevate your downhole performance with HOCA Oil Tools – where technology, innovation, and reliability converge to drive success. View Details

Needle Valves Mini Needle Valve Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Mini Needle Valve Series – Male x Female is designed for accurate and reliable flow control in small or compact piping systems. Its male-to-female connections allow easy integration into existing instrumentation or process lines. The valve ensures bubble-tight shut-off, preventing leaks in sensitive applications.

The rolled stem threads provide smooth operation, strength, and long service life, while the mirror-finished stem reduces friction, extends packing life, and ensures consistent performance. Packing located below the stem threads prevents lubricant washout, protects against corrosion, and keeps solids from entering the thread area, which could cause damage.

With low operating torque, these valves are easy to operate even in tight spaces. Optional panel-mount versions allow installation in control panels or instrument assemblies, making them ideal for oil and gas, chemical, and other industrial applications where precise flow control is essential.

View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

10 3/4" Mech-2 Double Grip Mechanical Set Packer

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type