Ballycatter.ca - Industrial Equipment

7" Mech-1 Single Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Junk Basket - Valve Catcher

Wireline Unit for Offshore

Designed for heavy duty use. Standard drum comes with a 20” core and capacity for 2 slicklines each 0.150” x 25,000 feet (7500 meters). Standard drive uses Sauer series 90 pump, motor (hydrostatic closed loop drive) and Funk 4 speed transmission with double 60 chain and sprockets to drum. Large speed range from 15 feet/min (5 m/min) through 2000+ feet/min (600 m/min) at mid-point of drum. Pulling capability designed to exceed break strength of slickline installed. Standard drum and drive can pull +7000 lbs (3000 kg) at mid-point of drum. Double bar front traverse spooler or overhead spooler. View Details

Slickline Toolstring

LM2500 PT

The LM2500 is a multi-shaft gas turbine featuring a free-spinning power turbine, making it well-suited for dynamic and high-demand environments such as those found in oil and gas operations. In this design, the high-pressure turbine and compressor are mechanically independent from the low-pressure power turbine. This separation allows the power turbine, which drives the electric generator or mechanical load, to respond rapidly to changes in load demand. Its ability to accelerate quickly makes it ideal for applications where maintaining grid stability or mechanical output is critical. In scenarios where frequency fluctuations occur, the free power turbine can quickly compensate, helping to stabilize the grid and ensure smoother operation of all connected systems.

In its standard configuration, the LM2500 is equipped with a six-stage, low-speed power turbine. This turbine operates at a nominal speed of 3600 rpm and is designed to deliver reliable shaft power in steady-state conditions, making it particularly effective for electric power generation or mechanical drive in pipeline and process operations.

For applications requiring greater flexibility or higher continuous output speeds, the LM2500+G4 variant offers enhanced capabilities. It is available with either the standard six-stage, low-speed power turbine or an alternative two-stage high-speed power turbine. The high-speed variant is engineered for mechanical drive and other demanding industrial uses, with a design speed of 6100 rpm and an operating range from 3050 to 6400 rpm. This configuration supports continuous high-speed shaft output where needed and is particularly beneficial for compressors and other rotating equipment in oil and gas facilities.

Both the six-stage and two-stage power turbines can be operated over a cubic load curve, providing the adaptability required for variable load profiles commonly encountered in oil and gas operations. This flexibility, combined with the LM2500’s rapid response characteristics and modular design, makes it a dependable choice for critical infrastructure in upstream, midstream, and downstream sectors.

View Details

8 1/2 inch PDC Bit

A polycrystalline diamond compact (PDC) bit is a special type of diamond drilling bit that does not use roller cones, but instead has polycrystalline diamond inserts. PDC bits get their name from the polycrystalline diamond compacts used for their cutting structure. Since their first production in 1976, the popularity of bits using PDC cutters has grown steadily, and they are nearly as common as roller-cone bits in many drilling applications. View Details

5 Valve Manifolds R Type – Pipe to Pipe 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 5 Valve Manifold R Type – Pipe to Pipe is designed for high-pressure oil and gas applications where differential pressure transmitters or gauges need to be connected, calibrated, and maintained safely. This manifold provides two block valves, two equalizer valves, and one bleed valve in a single assembly, allowing operators to isolate the transmitter, equalize pressure between impulse lines, and safely vent pressure when required.

The R Type configuration is particularly suitable when multiple valve functions are needed in a compact layout. By combining all five valves in one manifold, it reduces the number of separate components, minimizes potential leak points, and saves installation space compared to using individual valves.

This manifold is ideal for environments where reliability and safety are critical, offering 6000 PSI standard working pressure, metal-to-metal sealing for high-pressure and temperature performance, and compatibility with NACE MR 01 75 materials. Its design ensures smooth operation, low torque handling, and long-term durability, making it the preferred choice for complex measurement and control systems in oil and gas operations.

View Details

4 1/2” Surface-Controlled Subsurface Safety Valve (SCSSSV)

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) is selected for wells that require dependable emergency shut-in capability while handling moderate to high flow rates. This size is appropriate when production demands a larger flow area to minimize pressure drop and maintain efficient fluid flow. It provides essential well control by automatically isolating the wellbore in cases of equipment failure or loss of surface control pressure, ensuring safety without compromising production efficiency.

This SCSSSV is designed for compatibility with 4 1/2" (114.3 mm) tubing and is available with landing nipple seal bores of 3.437", 3.688", or 3.813". It supports working pressures up to 5,000 psi and comes with internal valve bore options of 1.75", 1.87", and 2.12"—allowing operators to balance flow capacity with safety requirements.

The self-equalizing mechanism minimizes differential pressure across the valve during opening, improving control and reducing mechanical wear. With sealing surfaces located outside the flow path in the open position, the valve is less susceptible to erosion and damage during production.

Constructed with a robust flapper made from bar stock, the valve features a flapper-type mechanism that reliably closes to prevent uncontrolled flow. The valve is wireline retrievable, which allows for extraction and servicing of major components without removing the entire tubing string. This capability reduces intervention time and operational costs, contributing to overall well uptime and efficiency.

View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Modular Telemetry System

Unlock the Power of Deep-Water Connectivity with the Modular Telemetry System Discover the Versatile Solution for Subsea Communications Diving into the depths of the ocean requires cutting-edge technology that can handle the challenges of the underwater world. We present the Modular Telemetry System (MTS) - a game-changing solution that will redefine the way you communicate with your remote underwater systems. The Bottleneck Breaker Trying to fit a bottle into a square space? Say goodbye to those limitations with the MTS. Our rectangular design revolutionizes subsea telemetry, offering a multitude of Ethernet, video, and serial connections for deep-water ROVs, drills, and other systems. Tested to exceed 4,000m water depth, this system is built to perform even in the harshest subsea environments. Simplicity in Retrofitting Upgrading older ROVs and expanding their capabilities has never been easier. The MTS package provides everything you need to make use of a spare fiber connection and A/C or high voltage power. Retrofitting older ROVs with multiple sensors on a tooling skid or integrating custom equipment like geotechnical platforms has never been more streamlined. Compact Yet Powerful The MTS boasts an impressive feature set while maintaining a compact size. Measuring at less than 2 feet long and only 5.5 inches wide, it's about the height of a coffee mug. But don't be fooled by its size; it packs a punch with up to 18 different accessory connections and half a kilowatt of onboard power, all rated to a remarkable 4,000 meters depth. Engineering Excellence Using modern 7075 Aluminum alloy and employing advanced FEA modeling and testing, we've ensured the MTS is built to withstand the most challenging subsea conditions. Its robust construction guarantees durability and reliability, offering peace of mind during your underwater missions. Customization and Expansion The MTS's versatility knows no bounds. It replaces larger telemetry bottles, offering ample space for multiple pieces of equipment. Whether you need a full telemetry system with instrument power or wish to expand your ROV skids, the MTS has got you covered. Unmatched Connectivity The MTS Subsea Mux is the heart of the system, featuring: • Depth Rating: Dive confidently up to 4,000 meters, exploring new depths with ease. • Multiple Connectivity: Enjoy 16x serial ports, 2x PAL/NTSC video, and 1x Ethernet, providing you with a wide range of communication options. • Onboard Power: Boasting 500W of onboard regulated 26/12VDC power, it ensures your remote sensors receive the power they need. Seamless Surface Integration The Surface Rack complements the MTS with its 19-inch Rack 2U chassis and RJ45 outputs, delivering low latency connections for a smooth surface experience. Powerful Transformation with MTSX If you require a full telemetry system with instrument power, our compact MTSX transformer assembly is the perfect addition. Featuring an integrated umbilical gland and oil-filled 3kW transformer with 3kV input, it provides unparalleled performance. Learn More Today To discover how the Telemetry System can elevate your subsea operations, reach out to us and join the ranks of industry leaders who trust the future of deep-water communications. Dive Deeper, Go Farther. View Details

Wrenches for professional maintenance of industrial equipment

A wrench ensures the workability of the object so that it continues to work as fast and effectively as before. It is basically used to provide a strong grip; it is also known as a spanner. Using a wrench is extremely easy. A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt. View Details

ROV Backplate

Unleashing the Full Potential of the Lanai ROV with M0020 Backplates We are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with us today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Lanai ROV with M0020 Backplates for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, we stand as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean. View Details

Maui ROV, Heavy Inspection Class ROV

Designed for the Extraordinary - Meet Maui ROV Are you ready to take your subsea operations to new heights? Introducing Maui ROV, the ultimate subsea solution designed with large payloads in mind. With its cutting-edge vectored thruster layout, professional Aluminum frame, and remarkable payload capacity, the Maui ROV stands out as a true game-changer in the industry. Mastering the Depths The Maui ROV is built to conquer challenging dives with ease, making it the ideal choice for survey work or heavy lifting tasks. Its impressive capabilities stem from the ingenious combination of design elements that result in unparalleled performance. Powerful Features for Unmatched Performance 1. Industrial Flight Computer and Linux User Interface: The Maui ROV features an industrial flight computer and user-friendly Linux interface, ensuring seamless control and precise maneuverability. 2. Topside Integrated Console: Equipped with a 22-inch sunlight-readable monitor and a hand controller, the Topside Integrated Console eliminates the need for additional equipment, streamlining your operations. 3. 6-Axis Stability and Fully Stabilized Mode: The Maui's ROV flight computer supports 6-axis stability, providing unmatched control and stability during underwater missions. 4. Exceptional Payload Space: Utilizing smaller diameter thrusters stacked vertically, the Maui ROV boasts exceptional payload space, enabling it to carry various instruments such as the Coda Octopus 3D Sonar, INS, Multibeam Profilers, or Sub Bottom Profilers. Experience the Specifications of Excellence Take a closer look at the impressive specifications that make the Maui ROV an indispensable asset for your subsea ventures: • Depth Rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in Air: 31.2kg • Payload Capacity (Fresh Water): 9.3kg • Payload Area: 610mm x 457mm • Thrusters: 8 lateral (45deg), 6 vertical • Ballard Pull: 27kg lateral, 28kg vertical • Top Speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux Video: 2 HD camera inputs • Lights: 8x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux Power: 5/12/24/48VDC regulated Topside Integrated Console Specifications: • Output Voltage: 400VDC, 3kW • Input Voltage: 240VAC, 15A maximum • Monitor: 22in HD sunlight-readable • Case: Wheeled, 610x420x260mm, 24kg • Fully Isolated Output with LIM • Intel i5 PC with Windows 10 Installed • Aux HDMI Monitor Output Tether Specifications: • Breaking Strength: 250kg • Diameter: 9.1mm • Length: Up to 500m • Neutral in Fresh Water Explore the Depths with Maui ROV Unleash the power of heavy payloads and challenging dives with the Maui ROV. Let our state-of-the-art technology redefine your subsea operations and elevate your success. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 38 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Oil Spill Kit - 5 Gallon Bucket

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Packer AD-1 Tension Set

The AD-1™ tension packer is a compact, economical, retrievable packer. Primarily used in waterlood applications, it can also be used for production, treating operations, and when a set-down packer is impractical. And because the AD-1 is tension-set, it is ideally suited for shallow wells where set-down weight is not available. The ADL-1™ tension packer is a large-bore version of the AD-1 and offers the same features and beneits; running and retrieving operations are also the same. We can source from current stock or direct from the manufacturer. View Details

LANAI Remote Operated Vehicle

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability We understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed. View Details

CBL-VDL

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them. View Details

Scaffolding for onshore and offshore

Finish the job in any and all conditions since this product is weather-resistant and durable so you can enjoy it for many years to come. Each frame is sold separately. Note that the galvanized cross braces and aluminum platforms with plywood are not included. When assembled, this scaffold has a load capacity of up to 4,960 pounds. View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 40-47 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Mini Hydraulic Power Unit

Empowering Your ROV: Introducing the Mini-HPU (Hydraulic Power Unit) We are committed to pushing the boundaries of subsea exploration and ensuring that your ROV missions are equipped with cutting-edge technology. Our latest innovation, the Mini-HPU (Hydraulic Power Unit), is designed to deliver unmatched power and reliability, elevating the capabilities of your hydraulic manipulators and tools on larger ROVs. Compact Powerhouse Don't let the size fool you! The Mini-HPU may be compact, but it packs a powerful punch. With a robust 3 horsepower output, this little dynamo is built to handle the most demanding subsea tasks with ease. The Mini-HPU provides the muscle you need to operate hydraulic manipulators and tools on larger ROVs effectively. Integrated Efficiency Efficiency is the name of the game, and the Mini-HPU excels in this aspect. Integrated within its sleek design is a convenient 1-gallon reservoir, ensuring an uninterrupted flow of hydraulic fluid to keep your operations running smoothly. No need to worry about external reservoirs, as everything you need is perfectly contained within this powerful unit. Adjustable Pressure Relief and Replaceable Filters We understand the importance of adaptability in your subsea operations. The Mini-HPU features an adjustable pressure relief valve, allowing you to fine-tune the pressure to suit your specific needs. Additionally, we've equipped this hydraulic power unit with easily replaceable filters, ensuring that your system stays clean and optimized for peak performance. Reliability at Its Core We believe in building products that stand the test of time. The Mini-HPU is no exception. Its high reliability fixed displacement pump ensures consistent and dependable performance, allowing you to focus on your mission without worrying about equipment failures. Unleash Your ROV's Potential With a maximum pressure of 2,500 PSI and a maximum flow of 1.6 gallons per minute (standard pump), the Mini-HPU is a formidable force in the subsea realm. It's designed to tackle a wide range of applications, from deep-sea exploration to intricate industrial tasks. Corrosion-Resistant Design The subsea environment can be harsh and unforgiving, but the Mini-HPU is ready for the challenge. Our engineers have crafted the unit with anodized aluminum, providing exceptional corrosion resistance and eliminating the need for additional paint coatings. Your Trusted Subsea Partner The Mini-HPU is a testament to our commitment to delivering advanced solutions that elevate your capabilities and redefine what's possible in the underwater world. Experience the Mini-HPU Difference Ready to take your ROV missions to new depths? Explore the power and versatility of the Mini-HPU and unlock a world of possibilities for your subsea operations. Contact us today and witness the next level of subsea performance with the Mini-HPU by your side. View Details

Annular Vent Valve 1-1/2 inch

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue. View Details

HDI 2200 Choke Position Indicator System

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

View Details

SC-2 Retrieable Packer

The Baker Hughes SC-2™ retrievable packer is a high-performance, retrievable, sealbore packer. It can be run and set on electric wireline, slick line/tubing with the same setting tools used for the D packer. We can source from current stock or direct from the manufacturer. View Details

Injection Well Subsurface Safety Valve WI 4.89

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Xanthum Gum (Liquid and Powder)

Introducing Xantham Gum from Cleanstream – the versatile solution for your drilling and completion needs. As a leader in providing innovative and environmentally responsible solutions for the oil and gas industry, Cleanstream is proud to offer this unique polymer for rheology modification, hole cleaning, and solids suspension. What sets Xantham Gum apart is its ability to provide excellent friction reduction – a feature that is unmatched by most other polymers in oilfield drilling and completion applications. Additionally, it can be used in most types of water-based fluids, making it an incredibly versatile product for your operations. Our in-house laboratory facilities allow us to determine the right approach to solve your specific problem. And at Cleanstream, we are committed to developing eco-friendly solutions for as many applications as possible. Whether you need Xantham Gum for a specific project or require our personnel and equipment for complete execution, we have you covered. Click on the datasheet for more information or contact us to learn how Xantham Gum can benefit your operations. Trust Cleanstream for innovative and sustainable solutions for your oil and gas needs. View Details

6 5/8" HP-5 Hydraulic Set Production Packer 24-32 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Braided Line 7/32 inch Sour Service

Superior Strength and Durability: InWaTec Combined’s 7/32" Braided Line for Sour Service Operations In the demanding and intricate world of well interventions, particularly in sour service conditions, the need for equipment that can withstand the rigors of a corrosive environment is paramount. InWaTec Combined is proud to introduce our 7/32" Supa 75 braided line, a specialized solution crafted for the harsh realities of fishing operations in sour service conditions where hydrogen sulfide (H2S) and other corrosive agents are present. Our 7/32" Supa 75 braided line is at the heart of InWaTec Combined's sour service offerings. Designed with high tensile strength and resistance to corrosive elements, this braided line ensures that fishing operations can be carried out with confidence and security, even in environments where H2S poses a significant risk to standard equipment. Resilience Under Pressure: The Supa 75 braided line is not just another cable; it's a product of rigorous engineering and quality materials, able to endure the stressors of sour well conditions without compromising performance. Corrosion Resistance: Our braided line is treated and constructed to resist the corrosive action of sour gas, ensuring longevity and reliability. This means uninterrupted operations and fewer replacements, saving time and resources. High-Performance Operations: With the Supa 75 line, fishing operations are conducted more efficiently and safely. Its robust build allows for the extraction of stuck equipment from the wellbore without the fear of line failure. Safety as a Priority: The safety of well operations is a non-negotiable aspect of InWaTec Combined’s services. The Supa 75 line's integrity in sour environments means enhanced safety for personnel and the well itself. Our commitment to innovation and customer service means that alongside the provision of the 7/32" Supa 75 braided line, InWaTec Combined offers comprehensive support and expertise. We provide tailored solutions that meet the unique challenges of each operation, ensuring that our clients have the best tools and knowledge at their disposal. Choose InWaTec Combined for your sour service operations and benefit from the advanced performance of our 7/32" Supa 75 braided line. With our technology and support, you can expect to extend the life of your well, maintain production efficiency, and uphold the highest safety standards. Trust in our braided line to deliver when it matters most, ensuring that your operations continue to flow smoothly, even in the face of adversity. View Details

Gauge Root Valve Bleed Valve with Vent Screw – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Bleed Valve with Vent Screw is designed for oil and gas applications where controlled pressure release is critical. It is installed on pressure gauges and instrumentation lines to provide a safe and easy way to vent trapped pressure. The vent screw allows operators to gradually release pressure without removing the valve, reducing the risk of sudden pressure surges that could damage equipment or compromise safety.

This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request. It is built to ASME B16.34 standards and produced under ISO 9001, PED, and ATEX quality systems, ensuring reliability and compliance with industry requirements. The design includes a metal-to-metal seal for high-pressure and temperature applications, a durable vent screw that prevents leakage, and easy operation even in confined spaces. Its construction allows for long-term durability and minimal maintenance, providing safe and accurate operation for critical oil and gas instrumentation systems.

View Details

SCSSSV Type NE 3-1/2 inch

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

Alligator Grab Wireline Fishing Tool – 1.25”, 1.50”, 1.85”, 2.25”, 2.81”, 3.50” O.D. – Adjustable Jaw Pressure

The Alligator Grab is a wireline fishing tool used to catch and retrieve loose or broken objects from inside an oil or gas wellbore. It has spring-loaded, serrated jaws that can be adjusted before use to set the right amount of grip for the object being retrieved. When downward force is applied, a pin shears, allowing the jaws to close and hold the object securely.

This tool is needed when small or hard-to-reach objects, often called “fish,” are stuck or floating in the wellbore. Unlike other retrieval tools, the Alligator Grab provides a controlled grip that can be adjusted to the size and type of object, reducing the risk of pushing it further down or damaging the well. It is not meant for heavy jarring once it has gripped an object, so it is used for careful and precise recovery.

The Alligator Grab comes in various sizes, with a maximum outside diameter of 1.25 to 3.50 inches, a fishing neck O.D. of 1.187 to 2.313 inches, and top connections ranging from 15/16-10 UN to 1-9/16-10 UN. It includes fishing necks and pin threads compatible with standard wireline equipment.

What makes this type of Alligator Grab unique is its ability to retrieve objects in tight or restricted wellbore spaces. Its adjustable jaws and compact size allow it to securely grip objects that other tools might not reach, making it especially valuable for precise and reliable recovery operations.

View Details

Lead Impression Block Runs

InWaTec Combined: Capturing Downhole Details with Precision Lead Impression Block Services In the realm of well intervention and remediation, knowledge is power. InWaTec Combined elevates this concept to new heights with our Lead Impression Block (LIB) running services, a pivotal tool in the 'fishing' operations toolkit. The LIB is not just an instrument; it's your eyes beneath the surface, providing crucial information that guides subsequent operations. Unveiling the Subsurface Mysteries At the core of our LIB service is a lead-filled cylinder, meticulously secured with pins within its body, designed to make a perfect impression of the downhole equipment, also known as "the fish." When retrieval operations are underway, knowing the exact shape, size, and condition of the fish is invaluable. This is where our LIB service shines, delivering a precise imprint of the obstruction, which becomes the blueprint for planning the recovery strategy. Tailored Weight Control for Precision Impressions The success of an impression block operation hinges on the precise control of the weight applied to it. InWaTec Combined's slickline units are equipped with sophisticated weight control mechanisms, allowing our skilled operators to lower the LIB into the wellbore with the exact amount of force needed to capture an accurate replica of the downhole situation. The Key to Efficient Fishing Operations Understanding what lies beneath the surface dictates the efficiency of the entire fishing operation. With the impression from our LIB, operators can ascertain not only the size and shape of the fish but also the appropriate tools and techniques needed for the next step. This preemptive intelligence minimizes trial and error, saves valuable time, and ensures that the chosen extraction method has the highest chance of success. A Foundation for Informed Decisions The intelligence gathered by the LIB is a critical asset in the decision-making process. InWaTec Combined prides itself on providing clients with detailed downhole data, enabling a strategic approach to fishing operations. The clarity provided by our LIB service means less downtime, fewer uncertainties, and a streamlined path to operational continuation. Your Partner in Downhole Clarity InWaTec Combined is not just a service provider but a partner in your well servicing endeavors. We bring not only the technology but also the expertise and experience to ensure that your fishing operations are based on the most accurate downhole information available. Conclusion: Precision Leads the Way In conclusion, the Lead Impression Block running services offered by InWaTec Combined are more than just a procedural step; they are a cornerstone of informed intervention. By enabling a precise understanding of the downhole environment, we empower operators to act with confidence and precision, ensuring the success of subsequent operations and the overall productivity of the well. Trust InWaTec Combined to deliver a clear picture of the challenges and the solutions beneath the surface. View Details

Valve Manifolds 2 Valve Manifold R Type – Integral Mount 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The R Type 2 Valve Manifold Integral Mount 1/2” Female NPT is a compact and robust solution for connecting impulse lines directly to pressure transmitters or gauges. It features a simple two-valve arrangement that allows operators to block process pressure, safely bleed trapped pressure, and calibrate transmitters without the need for additional piping. This configuration ensures quick and efficient maintenance and reduces potential leak points.

Its integral mount design allows the manifold to be attached directly to the transmitter, eliminating the need for extra brackets or complex assemblies. This not only saves space but also provides a secure and stable connection, which is particularly useful in oil and gas applications where reliability under high-pressure conditions is critical.

The manifold is constructed with a metal-to-metal body and bonnet seal to handle pressures up to 6000 PSI, with higher pressure options available upon request. It is fully factory tested for seat and packing leakage, and materials can be supplied to meet NACE MR 01 75 standards. The R Type is suitable for a wide temperature range and is designed to provide smooth operation, long-term durability, and leak-free performance even in demanding field conditions.

View Details

Pipe Fittings Hex Nipples Male NPT – 1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

The Hex Nipple Pipe Fitting with Male NPT threads is a precision component used to connect two female-threaded pipes or fittings in instrumentation and process control systems. The male tapered threads create a tight, leak-resistant seal when engaged with a corresponding female NPT connection, making it suitable for high-pressure and high-temperature applications commonly found in the oil and gas industry.

Manufactured from high-quality bar stock, the fitting provides strength and durability. Threads are capped and carefully packed to prevent damage during transport. The fitting is marked with the manufacturer’s name, size, material, and heat code for traceability. The design ensures proper thread engagement, reliable sealing, and smooth flow of fluids or gases.

These fittings meet or exceed ASME B1.20.1 standards for NPT threads and are rated according to ASME B31.3 for process piping, supporting safe and consistent operation in industrial environments. The male NPT design allows easy installation while maintaining a durable, leak-tight connection over the life of the system.

View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

Large Aluminum Jaws for ROV

Introducing Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations We are proud to announce the launch of the latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact us today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics. View Details

Hybrid Downhole Pump

The Sivam Hybrid Downhole Pump is a rod pump that utilises the existing tubing as the pump barrel. The standing valve is installed first in a tubing profile, and the travelling assembly is then installed. Dual barrier options such as the Rod Sentinel can also be installed and recovered using the Hybrid Downhole pump. The Hybrid Downhole Pump increases fluid production by maximizing rod pump barrel size, and installation costs are minimised by being through-tubing installable. An excellent choice for well testing existing completions that do not have artificial lift installed. When used in conjunction with the Rod Sentinel SCSSV the Hybrid Downhole Pump is capable of dewatering gas wells, rod pumping critical sour wells, or for installation on lower rate offshore wells. View Details

Bearings of various types

Bearings are "parts that assist objects' rotation". They support the shaft that rotates inside the machinery. Machines that use bearings include automobiles, airplanes, electric generators and so on. View Details

Tubing Hanger Coupling – 6 5/16” to 2 1/2”

The 6 5/16” to 2 1/2” Tubing Hanger Coupling is a specially made part used in oil and gas wells to connect a large casing opening to smaller tubing—typically 6 5/16 inches—to a smaller 2 1/2-inch upset production tubing. This size combination is often selected for well designs that require a broader casing interface for flow management, safety equipment, or well control hardware, while maintaining a slimmer production string for specific flow requirements or structural considerations.

This coupling is manufactured with upset-end compatibility, meaning it is suited for tubing that has thickened ends designed to strengthen threaded connections. This feature improves mechanical reliability and helps the connection withstand downhole pressure, tensile loads, and thermal cycling. The union nut design allows the coupling to be installed by tightening the nut without rotating the upper wellhead assembly, which is particularly useful in space-constrained or high-integrity environments.

To accommodate a range of operational needs, the coupling can be threaded on both ends to suit different tubing or spool designs and is compatible with back pressure valves—providing added safety during pressure control, intervention, or servicing. Built in accordance with API specifications and from high-strength materials, the coupling is designed to operate reliably in demanding conditions, including high-pressure wells and corrosive environments.

View Details

A-3 LOK SET Packer

The A-3™ LOK-SET™ packer combines advantages of a retrievable packer with the features of a permanent packer. An ability to lock down tubing forces makes the A-3 suitable for a broad range of applications, including production, injection, zone isolation, and remedial operations. The AL-2™ LOK-SET packer is similar to the A-3, and has a larger bore. To provide a simple and reliable injection system for retrieving an injection string without having to unseat the packer: L-10 or L-316 on-off sealing connectors, Product Family Nos. H68420 andH68422. Baker Hughes blanking plug can be used in the seating nipple proile ofthe on-off sealing connector to provide a means of plugging the lower zone whilethe tubing is being pulled. We can source from current stock or direct from the manufacturer. View Details

Freight Trucks available in multiple countries for various hauling applications

The demand for truck transport continues to grow and companies have realised it is effective to enter into long term contracts with dedicated service providers. Find the best equipment customised for your needs. Truck transportation effectively remains the most direct solution for the transport of goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. Contact us to to discuss the truck you want and what the possibilities are. View Details

Valve Manifolds 2 Valve Manifold L Type – Pipe to Pipe 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The L type 2 valve manifold is a compact and reliable solution designed for connecting impulse lines to pressure transmitters or gauges in industrial systems. Its primary purpose is to allow safe and efficient measurement of process pressures while providing the ability to isolate, vent, or calibrate instruments without disrupting the process.

The L type configuration refers to the layout of the two valves, arranged in an L shape, which allows for simple and intuitive operation. This design enables the user to block the process pressure, bleed off trapped pressure, and perform calibration on static pressure transmitters or gauges. The arrangement minimizes installation space while ensuring clear and accessible operation.

Pipe to pipe manifolds are designed to connect directly to process lines using standard piping connections. This allows for straightforward integration with impulse lines and reduces the need for additional fittings. The manifold provides a secure and leak-free connection while maintaining easy access for maintenance, calibration, and testing of instruments. Overall, the L type 2 valve manifold combines compact design, operational simplicity, and high reliability for critical measurement applications.

View Details

Tubing Inspection

Ensuring Production Integrity with InWaTec Combined's E-Line Tubing Inspection Services In the lifecycle of oil and gas wells, tubing integrity is fundamental to ensuring consistent production and operational safety. At InWaTec Combined, we offer specialized E-Line Tubing Inspection Services to preemptively identify and mitigate risks associated with tubing failure, utilizing state-of-the-art diagnostic techniques to safeguard your assets. Tubing failures, which can stem from deformation, physical wear, or corrosion, pose a significant threat to well integrity and production. Our advanced inspection services are designed to detect these issues early, enabling timely interventions that maintain continuous well performance. Our comprehensive suite of E-Line Tubing Inspection Services includes: Cased-Hole Calipers: These tools provide precise measurements of the internal diameter of tubing, detecting anomalies and changes that could indicate deformation or wear. Flux-Leakage Tools: Specialized for identifying defects in ferrous tubulars, these tools locate areas of metal loss or corrosion by detecting disruptions in magnetic flux. Electromagnetic Phase-Shift Tools: By measuring the changes in electromagnetic fields, these tools can effectively pinpoint areas of wall thickness changes due to corrosion or wear. Ultrasonic Tools: Employing high-frequency sound waves, these tools are adept at measuring tubing wall thickness, identifying areas at risk of thinning, which could lead to potential collapse. In addition to these, our E-Line Tubing Inspection Services also employ ultrasonic radial-cement-evaluation and modified openhole-imaging devices, which are particularly effective in assessing the condition of the tubing for signs of internal or external metal loss—a crucial step in preventing unexpected well shut-ins. At InWaTec Combined, we understand that the stakes are high when it comes to maintaining well integrity. Our E-Line Tubing Inspection Services are not just about identifying problems; they're about delivering peace of mind. By utilizing our advanced diagnostic tools, operators can rest assured that the integrity of their production tubing is being monitored with the utmost precision, allowing them to focus on maximizing output and efficiency. Choosing InWaTec Combined means partnering with a company that places a premium on innovation, safety, and reliability. Our commitment to excellence ensures that your operations benefit from the latest in inspection technology, delivered by a team of seasoned professionals. Trust us to provide the insights you need to keep your wells flowing safely and smoothly, today and into the future. View Details

Storm Choke 1-1/2 inch K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Wireline Spear – Downhole Fishing Tool – 1. 1/2”, 1 3/4", 2 1/4”, 2 3/4", 3 1/2” – ISO 9001:2015

The Wireline Spear is a downhole tool used in oil and gas wells to retrieve lost, broken, or compacted wireline that cannot be engaged with a standard two-prong wireline grab. It is designed for fishing operations where the wireline has become badly balled up or tightly compacted, situations where conventional pronged grabs are ineffective.

The tool is deployed on a wireline and guided down the wellbore under its own weight. Its central mandrel is surrounded by upward-pointing barbs or slips that penetrate and anchor into the wireline. When engaged, these barbs provide a secure grip on the wire, allowing the tool and wire to be retrieved to the surface.

The Wireline Spear is designed for maximum penetration into tightly balled or compacted wire. Its barbs ensure engagement even when the wire is severely entangled. Because the Wireline Spear is effectively non-releasable, it is typically run with a disconnect arrangement above the tool. This allows the assembly to be released if the wire cannot be recovered fully, preventing the tool from becoming stuck in the wellbore.

The tool is available in sizes from 1.5” to 3.5”, with a maximum outside diameter of 1.500” to 3.500” and a fishing neck O.D. of 1.375” to 2.312”. It connects to the wireline through a top connection ranging from 15/16 – 10 UN to 1-1/16 – 10 UN and can retrieve wire diameters from 0.50” to 3.50”.

The Wireline Spear is constructed from steel to withstand downhole mechanical stresses and pressures. Its design includes a central mandrel with upward-pointing barbs that secure tightly compacted or balled-up wireline. The tool’s compact dimensions and engagement mechanism allow it to retrieve wireline that cannot be captured by standard pronged grabs, and it is generally run with a disconnect arrangement above the tool to allow release if the wire cannot be recovered.

View Details