Ballycatter.ca - Industrial Equipment

5.5 inch Depthstar Surface Controlled Subsurface Safety Valve

Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog. View Details

FH Hydrostatic Retrievable Packer

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

Bag Oil Spill Kit

Depthstar SCSSSV 4.5 inch

The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog. View Details

Wind Turbine Charger

Rutland 1200 Turbine Features Unique Tri-Namic Aerofoil Blades The refined aerofoil blade profile is purpose designed for quietness, low windspeed start up and high wind peak aerodynamic performance. Each injection moulded blade is identical and perfectly balanced for smooth operation. Unrivalled power generation of 250W at 10m/s (23mph/37kmph) and peak power of 483W @ 15m/s. Our efficient, finely profiled Tri-namic blades ensure that the Rutland 1200 converts the maximum energy available in the wind to charge your batteries. Elegant and Aerodynamically Styled The sculpted nose and nacelle efficiently direct the flow of air leading to the built-in tail fin which directs the rotor to the prevailing wind. Our Build Quality The Rutland 1200 Turbine sets the standard for micro wind turbines in both performance and reliability. At our manufacturing facility in Corby, UK we use high grade materials to create a robust, high quality and long lasting turbine. Distinctive blue hard anodized marine grade aluminium, modern and lightweight UV stable injection mouldings and stainless steel components and fasteners perform in temperatures experienced from the Arctic to the equator. Available in 12V 24V & 48V versions. Generator The Rutland 1200T generator is based on Marlec’s pioneering disk type design. Its low resistance AC operation combines the latest powerful rare earth type magnets with a 3-phase winding and low friction bearings. This is housed in a protective aluminium casing and all manufactured by Marlec in the UK. *features from manufacturers literature View Details

Stand off Protector

Gas Check Valve for LM2500 Gas Turbine

The Gas Check Valve is a unidirectional valve used in LM2500 gas turbine systems to prevent the reverse flow of combustion gases into critical fuel and oil lines. Its primary function is to maintain the correct flow direction, ensuring that gases only travel toward the combustion chamber and not back into upstream components, where reverse flow could cause damage, safety risks, or system inefficiencies.

This check valve is engineered to operate under the high-pressure and high-temperature conditions typical of industrial gas turbine environments. It serves as a passive safety component, requiring no external power to function, and contributes to the overall reliability and integrity of the turbine system.

Commonly found in aero-derivative gas turbines used in oil and gas applications, the check valve is essential for maintaining proper system performance. Its inclusion in the turbine’s gas path helps ensure safe operation by minimizing the risk of combustion gas contamination in auxiliary systems.

View Details

Pump Thru Plugs

Maximizing Downhole Efficiency with HOCA Oil Tools' Pump Thru Plugs In the dynamic realm of oil and gas operations, efficiency and reliability are paramount for ensuring the success and safety of downhole activities. HOCA Oil Tools, a pioneer in the field of downhole slick line tools, is proud to present its innovative Pump Thru Plugs, designed to meet the unique challenges faced by the industry. Tailored for seamless integration into well operations, our Pump Thru Plugs stand as a testament to our commitment to enhancing downhole efficiency and well integrity. HOCA’s Pump Thru Plugs: Engineered for Enhanced Downhole Operations Our Pump Thru Plugs are meticulously crafted to provide operators with a reliable solution for isolating sections of the well while maintaining the ability to pump fluids through the plug. This dual functionality is essential for a variety of downhole operations, from well treatments to testing phases. Built from high-grade materials and engineered to withstand the harsh conditions of the downhole environment, HOCA’s Pump Thru Plugs ensure durability, reliability, and performance. Experience the HOCA Oil Tools Difference Opting for HOCA Oil Tools’ Pump Thru Plugs means choosing a product backed by innovation, quality, and a deep understanding of downhole challenges. Our commitment to providing high-quality downhole solutions ensures that our products not only meet but exceed the operational demands of the modern oilfield. By incorporating our Pump Thru Plugs into your downhole toolkit, you are taking a step towards enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and leverage the advantages of our Pump Thru Plugs to optimize your operational outcomes. Partner with us and elevate your downhole operations to new levels of success and efficiency. With HOCA Oil Tools, empower your downhole activities with tools that redefine industry standards for efficiency, safety, and performance in the demanding world of oil and gas extraction. View Details

Ambient Pressure SSSV 5-1/2

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

ROV Surface Console

Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain is a high-performance isolation and venting solution designed specifically for oil and gas applications. This valve combines two independent ball isolation valves and a centrally located needle drain valve within a single, compact body, ensuring reliable double isolation and safe pressure relief or venting.

Manufactured in compliance with ASME B16.34, API 6D, and ISO 17292 standards, it offers assurance of global quality and safety benchmarks. The design accommodates line sizes ranging from ½” to 2”, with pressure ratings from Class 150 up to Class 2500, making it suitable for both standard and high-pressure operations.

The flange x flange connections provide secure installation and easy integration into piping systems, while the ball x ball configuration guarantees tight shut-off. The needle drain allows for controlled venting, sampling, or pressure equalization, enhancing operational safety and efficiency.

The valve is well-suited for critical applications such as pipeline isolation, meter calibration, instrumentation, and maintenance operations in oil and gas facilities. Its compact, space-saving design reduces potential leak paths compared to conventional multi-valve assemblies, lowering installation costs and improving reliability.

View Details

Environmentally Friendly Chemicals

At Cleanstream, we understand the importance of using safe, green and environmentally friendly chemicals for cleaning, de-rusting, and protecting any kind of reusable and/or precious objects and property. That's why we supply a range of pH-neutral, safe and innovative cleaning solutions that comply with environmental regulations and minimize the impact on the environment. Our products are designed to provide you with a reliable and efficient solution to your cleaning needs, while ensuring the safety of your staff and the environment. We offer a variety of solutions for cleaning, descaling and protecting metal tools, pipes, installations, boilers, heat exchangers, pump systems and more. Our solutions are effective, yet safe for hands, skin and the environment. In addition, we also provide strong solvents for cleaning sulphate deposits in geothermal, oil and gas wells, mid and downstream installations and systems. Our innovative acid substitutes are perfect for the stimulation of geothermal, oil and gas wells. What sets us apart is our commitment to providing green solutions that are also effective. Our products are certified to be environmentally friendly, effective and comply with all relevant regulations. Our certifications include CEFAS, HOCNF Certificate (Harmonized Offshore Chemical Notification Format), and REACH documentation (Registration, Evaluation and Authorization of Chemicals: European legislation for registration, evaluation and authorization of chemicals). At Cleanstream, we are proud to be your green partner in the industry. We continuously research and develop new and innovative products to provide the best and most efficient solutions for our clients while also ensuring the protection of the environment. Trust Cleanstream to provide you with safe, effective and environmentally friendly cleaning solutions. Contact us today to find out more about our products and services. View Details

Wisdom EX Cap Lamp

Lead Impression Block Runs

InWaTec Combined: Capturing Downhole Details with Precision Lead Impression Block Services In the realm of well intervention and remediation, knowledge is power. InWaTec Combined elevates this concept to new heights with our Lead Impression Block (LIB) running services, a pivotal tool in the 'fishing' operations toolkit. The LIB is not just an instrument; it's your eyes beneath the surface, providing crucial information that guides subsequent operations. Unveiling the Subsurface Mysteries At the core of our LIB service is a lead-filled cylinder, meticulously secured with pins within its body, designed to make a perfect impression of the downhole equipment, also known as "the fish." When retrieval operations are underway, knowing the exact shape, size, and condition of the fish is invaluable. This is where our LIB service shines, delivering a precise imprint of the obstruction, which becomes the blueprint for planning the recovery strategy. Tailored Weight Control for Precision Impressions The success of an impression block operation hinges on the precise control of the weight applied to it. InWaTec Combined's slickline units are equipped with sophisticated weight control mechanisms, allowing our skilled operators to lower the LIB into the wellbore with the exact amount of force needed to capture an accurate replica of the downhole situation. The Key to Efficient Fishing Operations Understanding what lies beneath the surface dictates the efficiency of the entire fishing operation. With the impression from our LIB, operators can ascertain not only the size and shape of the fish but also the appropriate tools and techniques needed for the next step. This preemptive intelligence minimizes trial and error, saves valuable time, and ensures that the chosen extraction method has the highest chance of success. A Foundation for Informed Decisions The intelligence gathered by the LIB is a critical asset in the decision-making process. InWaTec Combined prides itself on providing clients with detailed downhole data, enabling a strategic approach to fishing operations. The clarity provided by our LIB service means less downtime, fewer uncertainties, and a streamlined path to operational continuation. Your Partner in Downhole Clarity InWaTec Combined is not just a service provider but a partner in your well servicing endeavors. We bring not only the technology but also the expertise and experience to ensure that your fishing operations are based on the most accurate downhole information available. Conclusion: Precision Leads the Way In conclusion, the Lead Impression Block running services offered by InWaTec Combined are more than just a procedural step; they are a cornerstone of informed intervention. By enabling a precise understanding of the downhole environment, we empower operators to act with confidence and precision, ensuring the success of subsequent operations and the overall productivity of the well. Trust InWaTec Combined to deliver a clear picture of the challenges and the solutions beneath the surface. View Details

Solar Charge Controller

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue View Details

Electric Submersible Pump Straight Pull 4.5" Packer

The Ballycatter Model WC-ESP Straight Pull 4.5” Packer is a compact, hydraulic-set production packer optimized for ESP completions in 4.5” casing. It features a pass-through section for ESP power cables, allowing seamless electrical connectivity between the surface and the ESP unit below.

The single-mandrel design with Acner Array Packing Element ensures superior sealing integrity, even in high-pressure and high-temperature wells. Its bi-directional slip system resists pressure from both above and below, providing secure anchoring and preventing unwanted movement.

Setting is achieved hydraulically by applying tubing pressure, locking the packer in place for long-term well isolation. Retrieval is simplified through a straight pull mechanism, eliminating the need for complex downhole tools and ensuring fast, efficient removal in standard and deviated wells. Compatible with all major ESP cable pack-off and feed-thru devices, the WC-ESP Straight Pull 4.5” Packer delivers reliability and ease of operation in compact wellbore conditions.

View Details

Multi-Process 5001 All-in-One Welder

Canaweld: Your All-In-One Solution for Oil and Gas Welding When it comes to welding machines and accessories for the oil and gas industry, Canaweld stands out as a leading expert. Our multi-process welding machines are designed to cater to all your welding needs, providing a comprehensive range of capabilities to handle various welding processes with ease. From MIG welding to TIG welding, Stick welding to Flux Cored welding, our multi-process welders are the ultimate all-in-one solution for your welding projects. Unmatched Variety, Unbeatable Quality At Canaweld, we take pride in offering a wide range of multi-process welders to meet the diverse needs of the oil and gas industry. Our production lines include industrial heavy-duty multi-process welders, high-tech (programmable, LCD panel, Synergic, or pulse) multi-process welders, and portable multi-process welders. Whatever your welding requirements, we have the perfect welding machine to match your needs. Versatility to Handle Various Materials Our multi-process welders are engineered to tackle a wide range of materials commonly used in the oil and gas industry. From mild steel and stainless steel to aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys, our machines are equipped to handle it all. Professional-Grade Wire-Feeding Mechanisms We understand that a robust and reliable wire-feeding mechanism is crucial for seamless welding operations. That's why all our multi-process welders are equipped with professional, heavy-duty wire-feeding mechanisms to ensure smooth and consistent wire feed, reducing downtime and improving efficiency. Introducing the Multiprocess 5000: The Workhorse for Medium to Heavy-Duty Applications The Multiprocess 5000 is a powerful 400-Amps welding machine that takes welding to a whole new level. Capable of Stick welding, MIG welding, Flux cored welding, or TIG welding with a lift start, this robust and reliable workhorse is the perfect companion for all your medium to heavy-duty applications. Engineered for Tough Conditions Designed to withstand the harshest conditions, the Multiprocess 5000 is a true workhorse. Its heavy-duty, robust design ensures reliability, making it a dependable partner in the most demanding environments. Unparalleled Performance With high power at 100% duty cycle and tested in extreme temperatures of 104°F/40°C and 140°F/60°C, the Multiprocess 5000 delivers exceptional welding quality, precise arc striking, and a highly stable arc. Its fully encapsulated PCB protects against dust contamination, ensuring continuous performance even in challenging conditions. Optimal Welding Control The Multiprocess 5000 features automatic compensation for main power fluctuations within ± 20% and electronic continuous control of inductance, ensuring trouble-free welding and excellent CC/CV characteristics. Whether you're engaging in MIG/MAG, Flux-cored, or Stick welding (MMA), this machine offers exceptional welding characteristics. User-Friendly and Worry-Free Setting parameters is a breeze with the Multiprocess 5000's user-friendly design. It includes initial and final crater control for precise welding results and comes with a comprehensive 3-year warranty, giving you peace of mind and confidence in your investment. Choose Canaweld: Your Trusted Welding Partner Experience the power, versatility, and reliability of Canaweld's multi-process welding machines. From the oil and gas industry to various industrial applications, our welding solutions have been trusted by professionals worldwide. When it comes to welding machines and accessories, Canaweld is the name you can trust. Unlock the potential of your welding projects with Canaweld's cutting-edge technology and exceptional performance. Invest in a welding machine that delivers superior results and choose Canaweld for all your welding needs. View Details

Off-Engine Electrical Cable Harness – E3/E17 for LM-Series Turbines

The E3/E17 off-engine electrical cables are designed for resilience in the toughest of applications. To protect the critical wiring components from exposure to harsh environmental conditions, these cables incorporate rugged materials and advanced protective features.

Used with LM2500 gas turbines, these cables are located outside the engine and serve as essential links between the turbine’s internal control systems and external instrumentation, control panels, and auxiliary equipment.

Built to withstand vibration, moisture, extreme temperatures, and chemical exposure, E3/E17 cable harnesses include stainless steel connectors, rubber or fluoropolymer over-molding, and electromagnetic interference (EMI) shielding to maintain signal integrity and durability.

The E3/E17 classifications indicate different cable configurations and connector types tailored for specific LM turbine system requirements. Both ensure reliable transmission of electrical power and control signals critical to turbine operation, safety, and performance monitoring.

Manufactured with custom materials and protective coatings, these cables comply with hazardous location standards such as ATEX and UL/CSA certifications. Their robust design provides long service life with minimal maintenance, supporting high fleet availability and operational reliability.

In oil and gas applications, where equipment is exposed to extreme environments and strict safety regulations, the E3/E17 off-engine cables offer dependable, durable connectivity. Their rugged construction and certification for hazardous locations make them ideal for maintaining safe, continuous turbine operation in demanding field conditions.

View Details

Bottomhole Pressure Instrument Hangers and Tools

Elevate Downhole Efficiency with HOCA Oil Tools' BHP Tools for Landing Nipples In the sophisticated world of downhole operations, where precision and efficiency govern success, the significance of specialized tools cannot be overstated. HOCA Oil Tools, at the forefront of downhole technology, proudly presents our line of BHP Tools for Landing Nipples, specifically engineered to support wireline operations and ensure seamless integration and functionality in landing nipple environments. HOCA's BHP Tools for Landing Nipples: Unmatched Precision and Reliability Designed with the end-user in mind, our BHP Tools for Landing Nipples offer a comprehensive solution for monitoring bottom-hole pressure (BHP) and other downhole parameters. These tools are essential for optimizing wireline operations, allowing for accurate data recording and ensuring the safe and secure placement of geophysical instruments within landing nipples. Crafted from premium materials and engineered to withstand the challenging downhole environment, our BHP tools exemplify our dedication to quality, innovation, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we understand the challenges faced in the oil and gas industry and are committed to providing solutions that enhance operational success. Our BHP Tools for Landing Nipples represent this commitment, offering a level of precision, efficiency, and reliability that sets new industry standards. Choosing HOCA’s BHP Tools for your downhole operations means not only equipping yourself with superior tools but also partnering with a company that stands behind its products with unparalleled support and expertise. Opt for HOCA Oil Tools for your landing nipple needs and take your downhole operations to the next level. Partner with us to leverage the advantages of our BHP Tools and experience enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, elevate your wireline operations with tools that blend innovation with reliability – driving your success downhole. View Details

Multiprocess 301-SL Welder

Gas Turbine LM2500+ DLE 50Hz 1x CC

The LM2500+ DLE in a 1x1 combined cycle configuration—one gas turbine, one heat recovery steam generator (HRSG), and one steam turbine—delivers significantly higher efficiency, exceeding 50% in combined cycle mode.

Designed for high thermal efficiency, fast start capability, and reduced emissions, the LM2500 family is widely used across onshore and offshore environments, including industrial plants, pipeline stations, CHP systems, and utility-scale power production.

The DLE combustion system enables the LM2500+ to maintain low NOx and CO emissions without the need for water or steam injection—simplifying operations and reducing water-related maintenance.

Key features include:

Triple annular combustor design for even temperature distribution and lower emissions across the power range
Electrically actuated DLE fuel valves replacing traditional electro-hydraulic SAC valves for better control
75 pre-mixers in 30 external modules, creating a consistent lean fuel/air mixture
NOx emissions ≤15–25 ppm and CO emissions ≤25 ppm (on natural gas, full load)

With fast ramp-up—achieving base load from cold start in under five minutes—the LM2500 is an ideal choice for fast-start and cycling applications. This performance makes it well suited to dynamic grid environments and industrial use cases requiring quick responsiveness.

View Details

5" HP-6 Hydraulic Set High Angle Production Packer for 15-18 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

C-1 Single Grip Invertible Packer

The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. View Details

SC-2 Retrieable Packer

The Baker Hughes SC-2™ retrievable packer is a high-performance, retrievable, sealbore packer. It can be run and set on electric wireline, slick line/tubing with the same setting tools used for the D packer. We can source from current stock or direct from the manufacturer. View Details

12 unit Locking FAST charger rack

Secure and Efficient Charging with the CSA 12 Unit Locking FAST Charger Rack from Provix Provix introduces the CSA 12 Unit Locking FAST Charger Rack (Part # NWI-NWCR-12BLC), a compact yet powerful charging solution designed for the efficient management of mining and industrial lighting equipment. This charger rack combines fast charging capability with enhanced security, making it an ideal choice for smaller teams or tight spaces. Fast Charging for Essential Equipment Designed to keep pace with the demanding schedules of modern mining and industrial operations, the CSA charger rack offers rapid charging times of 4 hours for the WISE LITE2 and 5 hours for the LAMP3A/4A models. This quick turnaround ensures your equipment is ready to go when you are, reducing downtime and boosting productivity. Locking Feature for Added Security One of the key advantages of the CSA 12 Unit Charger Rack is its locking mechanism. This feature provides added security for your valuable equipment, ensuring it remains safe and secure while charging. Ideal for locations where additional protection is desired, the locking rack is a safeguard against unauthorized access or removal of the equipment. Compact Design for Space Efficiency The compact size of the CSA 12 Unit Charger Rack is perfect for operations where space is at a premium. It’s designed to be single-sided, making it easy to place in equipment rooms, workshops, or mobile units, maximizing space utility without compromising on charging capacity. Durable and Reliable Built to withstand the harsh environments typical of mining and industrial settings, the CSA charger rack is durable and reliable. Its robust construction guarantees long-term performance, representing a smart investment for operations focused on efficiency and security. Ideal for Smaller Teams or Limited Spaces This charging solution is particularly well-suited for smaller mining crews, construction teams, or rental fleets. It allows for the management of multiple devices without needing a large amount of space, making it a versatile choice for various operational sizes and types. Upgrade Your Charging Station Today The Wisdom CSA 12 Unit Locking FAST Charger Rack is available now at Provix. Enhance your equipment management with this efficient, secure, and space-saving solution. Visit www.provix.net to learn more and bring advanced charging capabilities to your operation. View Details

Subsea X-mas Tree for subsea oil and gas developments

Subsea Christmas Trees, both standard and horizontal are available in current stock and can be shipped worldwide. The subsea x-mas tree is designed for the highest level of reliability with manual rov overrides and retrievable chokes these trees are ready for installation in the most demanding environments. If you require subsea trees, consider the time and cost savings of utilising our existing inventory. View Details

Storm Choke 2-1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Check Valve Poppet Type – Male x Female 1/2" NPT – 6000 PSI – ISO 9001

The 1/2" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism provides fast response and a positive seal under pressure, protecting pipelines, pumps, and equipment from reverse flow and pressure fluctuations.

The 1/2" size is suitable for medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required. Male × female connections enable secure inline installation and integration into existing piping systems without additional fittings, reducing potential leak points and simplifying system layout.

The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adaptation to system requirements. Construction materials include corrosion-resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures quality and material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.

View Details

Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

General Mechanical Slickline Service

InWaTec Combined: Precision at Depth with General Mechanical Slickline Services In the demanding arena of oil and gas well maintenance, precision is not just a virtue—it's a necessity. At InWaTec Combined, we provide General Mechanical Slickline services that bring precision to the heart of your well operations. Our slickline services deliver targeted maintenance solutions, assuring that performance, integrity, and productivity remain at the forefront of your downhole activities. The Role of Slickline in Downhole Maintenance Slickline is the unsung hero of well servicing, a slender thread of robustness, lowering essential tools into the depths of oil and gas wells to execute critical maintenance tasks. It is the conduit for precision, the means by which tools are delivered to the precise downhole location where they are needed. Why Choose InWaTec Combined's Slickline Services? Expertise at Every Turn: Our slickline operators are seasoned experts, with the skill to navigate complex downhole environments, ensuring that every tool is deployed with accuracy. Versatile Tool Deployment: From routine maintenance to emergency interventions, our slickline services cater to a diverse range of downhole needs, delivering the right tool to the right place at the right time. Streamlined Operations: Efficiency is key in downhole operations, and our slickline services are designed to minimize downtime, streamline processes, and maintain the peak performance of your wells. Safety and Precision Combined: At InWaTec Combined, we balance the need for operational precision with an uncompromising commitment to safety, ensuring that every slickline operation upholds the highest standards. Tailored Solutions for Downhole Challenges Every well presents its own set of challenges, and InWaTec Combined's General Mechanical Slickline services are crafted to meet them head-on. We provide tailored solutions, customizing our approach to fit the unique needs of your well, ensuring that maintenance tasks are carried out with precision and care. Advanced Technology for Optimal Results We leverage the latest in slickline technology, utilizing advanced materials and innovative techniques to enhance the reliability and effectiveness of our services. Our commitment to technological advancement means that we're always at the cutting edge, providing services that are not just current but future-ready. Your Partner in Well Maintenance Choosing InWaTec Combined for your slickline needs means selecting a partner dedicated to the success of your well operations. Our General Mechanical Slickline services are a reflection of our promise to deliver excellence in every aspect of our work, from the initial deployment of tools to the completion of maintenance tasks. Conclusion: Your Well's Performance, Our Commitment In conclusion, InWaTec Combined's General Mechanical Slickline services are essential for maintaining the high performance and integrity of your oil and gas wells. With our focus on precision, efficiency, and safety, we ensure that your maintenance operations are performed to the highest standards. Trust in the expertise and dedication of InWaTec Combined to keep your wells operating smoothly, safely, and efficiently. View Details

Gauge Root Valve – Male x Female – Lagging Extension – 1/4” NPT – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female with Lagging Extension in 1/4” NPT is a small but robust valve used to safely isolate pressure gauges in pressurized systems. It is designed to handle pressures up to 6000 PSI and temperatures from -50°C to 230°C, providing a reliable seal and leak-free operation. The lagging extension lets the valve be operated without removing insulation, protecting both the system and the operator.

The valve includes features to make it safe and easy to use: a back seat on the stem for extra security, a self-centering non-rotating tip for consistent shutoff, and an adjustable gland retainer to keep the packing tight. The removable T-handle allows smooth operation with minimal effort, while the dust cap prevents dirt or debris from entering the valve. All valves are factory tested for performance, include heat code traceability, and can be made from materials compliant with NACE MR 01-75 for corrosion resistance.

This valve is ideal for oil and gas systems where isolating gauges safely, maintaining insulation, and ensuring reliable operation are essential.

View Details

Perforating

Optimizing Reservoir Connectivity with InWaTec Combined's Precision Perforating Services In the intricate execution of oil and gas production, establishing a seamless flow path between the reservoir and the wellbore is vital for optimal extraction. At InWaTec Combined, we specialize in precision Perforating Services, a critical step towards ensuring that our clients’ wells are prolific producers. Perforating is a sophisticated process, and its execution is both an art and a science. It involves the precise creation of holes from the wellbore through the casing and cement sheath directly into the producing zone. This process is not merely about making openings; it's about strategically placing them to maximize flow rates and enhance the recovery of hydrocarbons. Our approach to perforating is methodical and tailored. We begin with an in-depth analysis of the well conditions and reservoir characteristics. This data informs our selection of perforating techniques, which range from the conventional to the cutting-edge, including shaped charges and advanced explosive materials that create clean, deep perforations with minimal damage to the formation. InWaTec Combined’s Perforating Services are about more than just punching holes; they are about delivering a highly controlled and effective conduit for hydrocarbons to travel from the reservoir to the surface. With our state-of-the-art technology and expertly engineered charges, we can ensure that the flow path is not just established, but optimized for the specific conditions of each well. Safety and precision are at the heart of our operations. We employ the latest in downhole technology, including real-time monitoring and electric line conveyance, to ensure that our perforations are executed with the highest degree of accuracy and control. This commitment to excellence and attention to detail is why InWaTec Combined is a leader in the field. By entrusting InWaTec Combined with your perforating needs, you are not just choosing a service provider—you are choosing a partner dedicated to enhancing the productivity of your wells. Our Perforating Services are integral to preparing your wellbore to be a strong link between the hidden riches of the reservoir and the energy needs of the world. Let us bring our expertise and precision to bear on your operations, and together, we can unlock the full potential of your assets. View Details

Special Function Pulling Tools

Pipe Fittings Hex Couplings – Female NPT – 1/8", 1/4", 3/8", 1/2", 3/4”, 1” – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Hex Couplings Female NPT are pipe fittings designed to join two male threaded pipes in fluid and gas systems. The female NPT threads provide a tight seal when screwed onto male pipes, ensuring leak-resistant connections. The hexagonal shape allows easy tightening or removal using a wrench, making installation straightforward even in compact spaces.

These fittings are commonly used in oil and gas and process control applications. They are suitable for high-pressure systems, with pressure ratings up to 10000 PSI depending on the material. Hex couplings are available in stainless steel, brass, and carbon steel, offering durability and corrosion resistance in demanding environments.

Sizes available range from 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, to 1”, providing flexibility for different piping setups. Their compact design and reliable performance make them ideal for instrumentation, process piping, and other applications where secure connections are essential.

View Details

Ball Valve Lever Operated – 3-Way Tube OD Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Tube OD Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows fluid to be routed between multiple tubing lines, making it useful for applications such as flow diversion, sampling, injection systems, or process line bypasses.

The side entry design provides easier access to the ball and internal components for maintenance or inspection, while also allowing compact installation in tight piping layouts. The tube OD connections enable direct attachment to tubing without additional fittings, simplifying assembly, reducing potential leak points, and providing secure, inline connections.

The valve uses a floating ball design to ensure consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and reliable with a quarter-turn lever, providing fast control with low torque. The internally loaded stem with shoulder prevents blowout, and replaceable seats and packings allow maintenance without replacing the entire valve.

View Details

Surface Controlled Subsurface Safety Valve FRN 6-5/8 inch

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Slickline Swabbing Mandrel Assembly

Optimize Your Well Performance with HOCA Oil Tools' Swabbing Mandrel Assembly In the specialized field of downhole operations within the oil and gas industry, the demand for high-quality, efficient, and reliable tools has never been higher. At HOCA Oil Tools, we stand at the forefront of downhole innovation, providing our clients with advanced solutions designed to optimize well performance and enhance operational efficiency. One such innovation is our Swabbing Mandrel Assembly, a key component in maintaining well pressure and fluid levels. Introducing HOCA's Swabbing Mandrel Assembly: Precision and Efficiency Downhole The HOCA Swabbing Mandrel Assembly is engineered for optimal performance in fluid lifting and wellbore cleaning operations. Designed with the end-user in mind, our Swabbing Mandrels are built from high-grade materials to withstand the rigors of the downhole environment, ensuring durability and long-term service. Compatible with a variety of tubing sizes, our assemblies are tailored to meet the specific requirements of your well operations. Elevating Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to advancing the capabilities of the oil and gas industry through our innovative downhole solutions. Our Swabbing Mandrel Assembly is a testament to this commitment, offering a blend of precision, efficiency, and reliability that sets new standards for well performance and maintenance. Integrating HOCA’s Swabbing Mandrel Assembly into your downhole operations means investing in the future of your wells. Not only do our tools enhance operational efficiency, but they also contribute to the overall safety and sustainability of your operations. With HOCA, you're not just purchasing a tool; you're acquiring a partner in downhole success. Unlock the full potential of your downhole operations with HOCA Oil Tools. Experience unparalleled performance, efficiency, and reliability with our Swabbing Mandrel Assembly, and take the first step towards optimized well performance and operational excellence. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who have experienced the difference our solutions can make. Elevate your operations with the precision and quality of HOCA’s downhole solutions – where excellence meets innovation. View Details

LM2500 Cylindrical Roller Bearing R6

The Bearing, Roller, Cylindrical No. 6R is a precision-engineered component used in LM2500 aero-derivative gas turbines commonly employed in the oil and gas sector. Installed at the No. 6R position, this cylindrical roller bearing supports the turbine’s rotor shaft by carrying radial loads and maintaining accurate shaft alignment during high-speed operation.

Its specialized roller design allows it to withstand intense mechanical stresses and thermal changes typical in demanding oil and gas environments. By reducing vibration and ensuring smooth rotation, the bearing contributes to stable and efficient turbine performance, which is critical for continuous operation in upstream, midstream, and downstream applications.

The No. 6R bearing’s role in maintaining precise shaft positioning supports the overall durability and reliability of LM2500 turbines used in gas compression, power generation, and offshore platforms, making it a key element in sustaining safe and efficient operations within the oil and gas industry.

View Details

HDI 2200 Choke Position Indicator System

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

View Details

Plug Chokes for Tubing

Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry. View Details

Ball Valve Lever Operated – 2-Way Tube OD End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated – 2-Way Tube OD End Connection is a high-performance isolation valve designed to start, stop, or regulate fluid flow in oil and gas piping systems. Its 2-way configuration provides a simple and reliable method for controlling flow in a single pipeline, allowing full shut-off or bi-directional flow as needed in production lines, injection lines, sampling lines, or small-diameter process tubing.

The valve features tube OD (outer diameter) connections, which allow direct attachment to tubing without the need for additional fittings. This simplifies installation, reduces potential leak points, and is especially useful in compact piping layouts or systems where welded or threaded connections are impractical.

The floating ball design ensures consistent, leak-proof shut-off even under high-pressure conditions. Operation is simple and efficient with a quarter-turn lever, providing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, and replaceable seats and packings extend service life.

The valve is suitable for a wide range of oil and gas applications where reliable isolation and ease of installation are required.

View Details

Pup Joints for Completions

Oilfield pup joints are short sections of pipe that are used to connect longer sections of pipe in the oil and gas industry. View Details

NWB-30 Charger

Experience Rapid and Efficient Charging with the Wisdom NWB-30 Charger – Now Available at Provix Provix is proud to introduce the Wisdom NWB-30 Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This state-of-the-art charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Versatile Charging Options The NWB-30 Charger offers both AC and DC charging capabilities, providing flexibility in various environments. It supports AC input of AC 100-240 V ± 10%, 0.2 A, 50-60 Hz, and DC input of 7-30 V, 1.6 A. This versatility ensures that you can charge your equipment anywhere, whether on-site or in the office. Optimized for Wisdom Lamp3A This charger is specially designed for the Wisdom Lamp3A, offering a fast charging time of approximately 5 hours. Its compatibility with this lamp model ensures that your lighting equipment is quickly ready for use, reducing downtime and enhancing productivity. High-Efficiency Charging With a maximum DC output voltage of 4.80 V ± 0.05 V and a DC output current of 2000 mA ± 100 mA, the NWB-30 Charger delivers efficient and rapid charging. This ensures your equipment is charged in the shortest possible time, keeping you ready for any task. Compact and Lightweight Design Measuring 114 x 79 x 35 mm (4.5 x 3.1 x 1.4 in) and weighing only 170 g (6.00 oz), the NWB-30 is compact and portable. Its lightweight design makes it easy to carry and store, ideal for professionals on the move. Reliable and Durable Built to withstand the rigors of mining environments, the NWB-30 Charger is both reliable and durable. Its robust construction ensures long-term performance, making it a valuable investment for any mining professional. Enhance Your Charging Experience The Wisdom NWB-30 Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit our website at www.provix.net. Stay powered and productive with the Wisdom NWB-30. View Details

Pipe Fittings Reducing Adapters – Female to Male NPT – 1/8", 1/4", 3/8", 1/2", 3/4", 1” – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Reducing adapters Female to Male NPT are used to connect pipes or instrumentation lines of different diameters in oil and gas systems. They allow a larger pipe or fitting to join with a smaller one without leaking, ensuring the flow of liquids or gases remains safe and controlled. These fittings are especially useful in situations where space is limited or existing piping needs to be adapted to new equipment.

They are made from high-quality materials such as stainless steel, brass, or carbon steel, which can handle pressures up to 10,000 PSI. The female NPT side threads internally to receive a male pipe, while the male NPT side threads externally to connect to a female fitting. This combination provides a secure, leak-resistant connection that is durable even under high pressure, vibration, or temperature changes.

Reducing adapters are widely used in oil and gas production, processing, and distribution systems.

They are ideal for connecting instrumentation, control systems, chemical injection lines, or any piping where size changes are required. Their compact design and simple installation make them a practical choice for engineers and technicians who need reliable connections in complex piping networks.

View Details

Wisdom Lamp 4A Retail Blister Pack

Illuminate Your World with the Wisdom Lamp 4A Retail Blister Pack – Now at Provix Provix is delighted to present the Wisdom Lamp 4A Retail Blister Pack, the ultimate lighting solution for a range of activities. Whether you're into rock climbing, night fishing, diving, or need reliable lighting for construction and emergency rescue, the Lamp 4A is your go-to source of illumination. Complete Package for Versatile Use The Lamp 4A Retail Blister Pack includes a 3A or 4A Cap Lamp, a magnetic USB charger, and a head strap. This comprehensive package offers everything you need for hands-free lighting in various environments. The easy-to-use head strap ensures the lamp stays secure, whether you're scaling a cliff or navigating a dark construction site. User-Friendly and Efficient Charging Charging the Lamp 4A is hassle-free. Simply connect the magnetic head to the lamp's charging interface and the USB connector to a Wisdom power adapter or any USB port. This flexibility allows you to charge your lamp at home, in the office, or even in your car. Outstanding Technical Specifications The Lamp 4A boasts impressive technical data, ensuring it meets your lighting needs: • Rated Capacity: 7,000mAh • Rated Voltage: 3.7V • LED Working Current: HI 1,400 mA, ME 570 mA, LO 80 mA • Initial Lighting Degree in 1m: HI 25,000 lx, ME 12,000 lx, LO 1,800 lx • Light Luminous Flux: HI 533 lm, ME 265 lm, LO 50 lm • Continuous Discharging Time: HI 5 hours, ME 13 hours, LO 60 hours • Light Power: HI 4.2W, ME 1.17W, LO 0.24W • Charging Time: 5 hours • Weight: 169g (5.96 oz) • Dimensions: 84x69x50mm (3.3x2.7x2.0in) Safety and Durability With a short circuit protection time of less than 320μs and a battery lifespan of 1,200 cycles, the Lamp 4A is not only safe but also durable. Its robust construction ensures it can withstand the rigors of various activities and work environments. Your Ideal Companion for Any Adventure or Task The Wisdom Lamp 4A Retail Blister Pack is an essential tool for anyone needing reliable and versatile lighting. Available now at Provix, this pack is perfect for all your adventures and professional tasks. Visit www.provix.net to learn more and get your hands on this indispensable lighting solution. View Details

3-1/2 inch injection valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Regulator for Argon / CO2

Introducing Canaweld's Argon/CO2 Regulators - Elevating Safety and Performance in Welding! When it comes to welding, safety, reliability, and precision are non-negotiable. That's why Canaweld is proud to present our Argon/CO2 Regulators, designed to deliver top-notch performance and ultimate peace of mind. Choose the Right Regulator for Your Welding Needs - 150 Series and 250 Series: 1. 150 Series Argon/CO2 Single Stage Light Duty Regulator: At Canaweld, we believe in providing you with the best, and our 150 Series Regulator is no exception. While most regulators on the market have UL safety approved gauges only, with Canaweld, the entire regulator is UL approved. Safety is our top priority, and we ensure that every component of our regulators meets the highest standards. Key Features of the 150 Series Regulator: • Built-in encapsulated HD valve seat: Experience optimal flow rate, reliability, and safety with our regulator's cutting-edge valve seat design. • Drop-forged fine brass body and bonnet: Crafted to withstand the toughest conditions, our regulator's durable construction guarantees exceptional performance. • 2" durable gauge: Achieve precise pressure monitoring with our easy-to-read gauge. • Ideal for light industry and commercial usage: Whether you're a professional welder or a commercial user, our 150 Series Regulator is designed to cater to your needs. • Flow (SCFH): 0-60 • Cylinder Pressure (PSI): 4000 2. 250 Series Argon/CO2 Single Stage Medium Duty Regulator: For welding projects that require more power and durability, our 250 Series Regulator is the perfect choice. Like all Canaweld products, this regulator is fully UL approved, ensuring that you can weld with confidence. Key Features of the 250 Series Regulator: • Built-in encapsulated HD valve seat: Experience unparalleled flow rate, reliability, and safety with our regulator's advanced valve seat technology. • Drop-forged fine brass body and bonnet: Our regulator's rugged construction guarantees lasting performance, even in demanding welding environments. • 2" durable gauge: Keep track of your pressure levels effortlessly with our robust and accurate gauge. • Ideal for medium industry and commercial usage: From industrial projects to commercial applications, our 250 Series Regulator is designed to meet your welding requirements. • Delivery pressure (PSI): 200 Canaweld - Where Safety Meets Performance: At Canaweld, we take pride in offering welding solutions that prioritize safety and performance. Our Argon/CO2 Regulators are no exception, ensuring reliable and precise pressure control for all your welding needs. Choose Canaweld for top-quality Argon/CO2 Regulators - Elevate your welding experience today! View Details

Tubing Hanger 2 3/8

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required. View Details

Specialized e-line tool services

Empowering Operations with Advanced Solutions: InWaTec Combined’s Specialized E-line Tool Services At InWaTec Combined, we are dedicated to pushing the boundaries of operational excellence in the primary industries sector. Our specialized E-line tool services are meticulously crafted to address the unique challenges faced by operators, offering a suite of cutting-edge solutions that epitomize efficiency and redefine maintenance standards. In the heart of every successful operation lies the ability to adapt and innovate. InWaTec Combined’s specialized E-line tool services are the embodiment of this ethos. With our comprehensive array of tools, we empower operators to enhance well performance, streamline diagnostic processes, and execute interventions with unparalleled precision. Our services are not just about providing tools; they are about delivering a strategic advantage. Here’s a glimpse into our suite of specialized E-line tool services: Diagnostic Excellence: With the fast-paced evolution of well technologies, the need for accurate diagnostics has never been more critical. Our suite includes state-of-the-art logging tools that provide real-time data on well conditions, enabling operators to make informed decisions swiftly. Precision Interventions: Whether it's for perforation, plug setting, or cutting, our E-line tools are engineered for precision. We understand that each intervention is unique, and our tools are designed to deliver tailored solutions that ensure successful operations, every time. Maintenance and Recovery: Our maintenance tools, from scrapers to bailers, are selected for their reliability and effectiveness. When it comes to recovery operations, our fishing tools are second to none, providing the assurance that you can retrieve what is needed without undue delay. Customized Solutions: Recognizing that each operation has its distinct challenges, we offer customized tool services. Our expert team works closely with clients to develop and deploy tools that are specifically designed to meet the unique demands of their wells. InWaTec Combined is committed to innovation and excellence. Our specialized E-line tool services are continually evolving, incorporating the latest technologies and methodologies to stay ahead of industry demands. By partnering with us, operators gain access to a level of efficiency and maintenance capability that sets new industry benchmarks. We believe in a future where every operation is optimized for peak performance, and our specialized E-line tool services are a cornerstone of this vision. Choose InWaTec Combined for your operations, and experience the power of advanced tools and expert service that drive success. View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type