Ballycatter.ca - Industrial Equipment

Surface-Controlled Safety Valves for 5” Casing Completion

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 5" SCSSSV (Surface-Controlled Subsurface Safety Valve) is used to shut in a well if there\'s a sudden loss of control—such as equipment failure or surface damage. Installed in the upper wellbore, it acts as a critical safety barrier, closing automatically if surface control pressure is lost. This helps protect people, equipment, and the reservoir from uncontrolled flow.

This valve is designed for 5" (127 mm) tubing and fits a 4.125" landing nipple. It’s rated for working pressures up to 5,000 psi and has a 2.38" internal bore, making it well-suited for high-rate production wells. The valve includes a self-equalizing feature that helps reduce pressure differences across the flapper during reopening, supporting smoother restarts and lowering mechanical stress.

Because it’s wireline-retrievable, the internal components can be serviced or replaced without pulling the tubing—saving time and reducing intervention costs. The flapper is machined from solid bar stock for durability, and the sealing surfaces are positioned out of the flow path when open, helping extend the life of the valve by reducing wear.

This size is typically chosen when both high flow capacity and reliable emergency shut-in protection are required.

View Details

FRN 3-1/2 inch Subsurface Safety Valve WR

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Tubing Mandrel Running Tool

Transport Trucking services for local and international equipment hauling

Transport trucks for long haul equipment moves. Specializing in international and express shipments. Since truck transportation effectively remains the most direct solution for the transport of your goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. If you need to get your goods from one place to another in a safe, reliable and cost effective way then truck transportation is hard to beat. So hard in fact that transporting goods by truck is still the most widely used mode of transport in Canada and North America. Contact us to arrange your next rig move or industrial equipment shipment. View Details

Welding Machine TIG AC/DC 501 Pulse

Pneumatic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Braided Line 7/32 inch Sour Service

Superior Strength and Durability: InWaTec Combined’s 7/32" Braided Line for Sour Service Operations In the demanding and intricate world of well interventions, particularly in sour service conditions, the need for equipment that can withstand the rigors of a corrosive environment is paramount. InWaTec Combined is proud to introduce our 7/32" Supa 75 braided line, a specialized solution crafted for the harsh realities of fishing operations in sour service conditions where hydrogen sulfide (H2S) and other corrosive agents are present. Our 7/32" Supa 75 braided line is at the heart of InWaTec Combined's sour service offerings. Designed with high tensile strength and resistance to corrosive elements, this braided line ensures that fishing operations can be carried out with confidence and security, even in environments where H2S poses a significant risk to standard equipment. Resilience Under Pressure: The Supa 75 braided line is not just another cable; it's a product of rigorous engineering and quality materials, able to endure the stressors of sour well conditions without compromising performance. Corrosion Resistance: Our braided line is treated and constructed to resist the corrosive action of sour gas, ensuring longevity and reliability. This means uninterrupted operations and fewer replacements, saving time and resources. High-Performance Operations: With the Supa 75 line, fishing operations are conducted more efficiently and safely. Its robust build allows for the extraction of stuck equipment from the wellbore without the fear of line failure. Safety as a Priority: The safety of well operations is a non-negotiable aspect of InWaTec Combined’s services. The Supa 75 line's integrity in sour environments means enhanced safety for personnel and the well itself. Our commitment to innovation and customer service means that alongside the provision of the 7/32" Supa 75 braided line, InWaTec Combined offers comprehensive support and expertise. We provide tailored solutions that meet the unique challenges of each operation, ensuring that our clients have the best tools and knowledge at their disposal. Choose InWaTec Combined for your sour service operations and benefit from the advanced performance of our 7/32" Supa 75 braided line. With our technology and support, you can expect to extend the life of your well, maintain production efficiency, and uphold the highest safety standards. Trust in our braided line to deliver when it matters most, ensuring that your operations continue to flow smoothly, even in the face of adversity. View Details

Ball Valve Lever Operated – 3-Way Tube OD Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Tube OD Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows fluid to be routed between multiple tubing lines, making it useful for applications such as flow diversion, sampling, injection systems, or process line bypasses.

The side entry design provides easier access to the ball and internal components for maintenance or inspection, while also allowing compact installation in tight piping layouts. The tube OD connections enable direct attachment to tubing without additional fittings, simplifying assembly, reducing potential leak points, and providing secure, inline connections.

The valve uses a floating ball design to ensure consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and reliable with a quarter-turn lever, providing fast control with low torque. The internally loaded stem with shoulder prevents blowout, and replaceable seats and packings allow maintenance without replacing the entire valve.

View Details

Wifi Setup

Revolutionizing Wireless Connectivity in the Oil and Gas Industry with Nulux Network Solutions In an era where instant and reliable connectivity is paramount, especially in the meticulous domain of the oil and gas industry, seamlessly integrated wireless networks are not a luxury but a necessity. Navigating through the intricate operational matrices and colossal data, Nulux Network Solutions proffers unparalleled WiFi setup services, ensuring your wireless connectivity is robust, reliable, and resilient. Nulux: A Vanguard in Wireless Solutions Through our profound expertise in devising wireless systems and infrastructure, Nulux has become synonymous with impeccable wireless communication links. Whether it’s through point-to-point or multipoint radio networks, tower construction/rigging, or mesh networks, our dedicated team ensures that geographical and physical impediments become inconsequential in your communication and data transmission endeavors. Wi-Fi Access Points: A Linchpin of Operational Efficacy Navigating through bustling work environments in the oil and gas sector necessitates the deployment of wireless networks that are not only widespread but also impeccable in terms of performance and reliability. With Nulux’s unparalleled experience in the design and deployment of wireless networks, seamless connectivity transcends your office and permeates every corner of your operation - whether it be the warehouse, facility floor, or field sites. Deciphering Point to Point and Multipoint Configurations In the context of wireless networking: Point to Point (P2P) networks furnish a direct linkage between two nodes, ensuring streamlined communication and data transmission between them. This configuration, touted for its enhanced security, due to the dedicated nature of the connection, and increased productivity, ensures your data travels securely and uninhibited from one point to another. Multipoint configurations, on the other hand, establish a connection amongst more than two points, with a single line shared amongst multiple nodes. This configuration can be particularly beneficial in scenarios that demand centralized data access across various points. The Nulux Promise: Connectivity Beyond Boundaries Tethering on our commitment to ensuring your operations are perpetually connected and data transmissions are ceaselessly secure and reliable, our WiFi setup services promise: Ubiquitous Connectivity: Ensuring every node, regardless of its geographical positioning, is perpetually connected. Robust Security: Safeguarding your data transmissions against potential cyber threats and ensuring they traverse through a secure network. Operational Efficiency: Through our WiFi setups, we ensure your operational matrix, be it documentation review, QA-QC, or project planning, is continually enhanced and refined. Cost-Effective Solutions: Ensuring your wireless network, whether it be a point to point or multipoint configuration, is not only operationally beneficial but also financially viable. In the intricate and operationally critical realm of the oil and gas industry, ensuring your wireless connectivity is not only robust but also reliable and secure, is paramount. With Nulux Network Solutions, you’re not merely adopting a WiFi setup; you’re embedding a network that promises operational excellence, secure data transmissions, and an enhanced operational matrix. Connect with Nulux today and ensure your operations are always connected, your data transmissions always secure, and your wireless network is always reliable. View Details

Ambient Storm Choke Valve 4 1/2 inch

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Premium All-Function Welding Helmet

Introducing the Canaweld Premium All-Function Welding Helmet Series - Your Ultimate Welding Companion! When it comes to welding, safety is paramount. A high-quality welding helmet is not just a piece of equipment; it's a shield that protects welders from sparks, ultraviolet, and infrared light during the welding process. That's why we've created the Premium All-Function Welding Helmet Series - a state-of-the-art auto-tinting helmet that blends top-notch protection with hands-free ease of use. Experience True Protection - Auto-Tinting Technology: Our Premium All-Function Welding Helmet Series features auto-tinting technology that takes your safety to a whole new level. The photosensitive filter in the helmet automatically adjusts the viewing area to a pre-set shade before the light hits your eyes, offering instant protection. When your weld is complete, the viewing area "un-tints," allowing you to inspect your work without lifting the mask. This innovative design not only protects your eyes but also increases detection time, ensuring you weld with confidence. What Sets Us Apart - Top-Quality Features: When it comes to a high-quality welding helmet, we don't compromise. Here's what makes our Premium All-Function Welding Helmet Series stand out: 1. Lightning Fast Detection: With a detection time (tinting speed) of at least 1/20,000 of a second, your eyes are always shielded promptly. 2. Enhanced Protection: Equipped with four photo-sensitive sensors, our helmet guarantees maximum efficiency and exceptional protection. 3. Versatile Shade Settings: The helmet offers multiple shade settings, allowing you to use it for all welding processes in various light conditions. 4. Wide Viewing Area: The large viewing area ensures ease of use even in confined spaces, giving you an unobstructed view of your work. 5. Featherweight Design: We've crafted our helmet with a lightweight design to reduce neck fatigue during prolonged use, keeping you comfortable and focused. 6. Reliable Power: The solar cell, combined with two replaceable CR2032 lithium batteries, ensures your helmet never runs out of juice. Our Premium All-Function Welding Helmet Series goes above and beyond to deliver top-tier features: • Infinitely adjustable sensitivity control for personalized protection. • Constant UV/IR protection with Shade DIN16 at all times. • External dark to light delay adjustment from 0.1 to 1.0 seconds. • Low amperage TIG welding compatibility for added versatility. • Grinding function and low volume alarm for added convenience. • Superior optical clarity for crystal-clear vision during welding. • ADF self-check ensures the helmet's integrity before use. Built to Last - Certified Excellence: At Canaweld, we take quality seriously. Our Premium All-Function Welding Helmet Series complies with CAN/CSA Z94.3 – 07 (R2014) standards, ensuring you get a product that meets the highest safety and performance requirements. Elevate Your Welding Experience - Choose Canaweld's Premium All-Function Welding Helmet Series! View Details

Wireline Retrievable FRN 4.5 inch SCSSSV

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Multi-Process 5001 All-in-One Welder

Canaweld: Your All-In-One Solution for Oil and Gas Welding When it comes to welding machines and accessories for the oil and gas industry, Canaweld stands out as a leading expert. Our multi-process welding machines are designed to cater to all your welding needs, providing a comprehensive range of capabilities to handle various welding processes with ease. From MIG welding to TIG welding, Stick welding to Flux Cored welding, our multi-process welders are the ultimate all-in-one solution for your welding projects. Unmatched Variety, Unbeatable Quality At Canaweld, we take pride in offering a wide range of multi-process welders to meet the diverse needs of the oil and gas industry. Our production lines include industrial heavy-duty multi-process welders, high-tech (programmable, LCD panel, Synergic, or pulse) multi-process welders, and portable multi-process welders. Whatever your welding requirements, we have the perfect welding machine to match your needs. Versatility to Handle Various Materials Our multi-process welders are engineered to tackle a wide range of materials commonly used in the oil and gas industry. From mild steel and stainless steel to aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys, our machines are equipped to handle it all. Professional-Grade Wire-Feeding Mechanisms We understand that a robust and reliable wire-feeding mechanism is crucial for seamless welding operations. That's why all our multi-process welders are equipped with professional, heavy-duty wire-feeding mechanisms to ensure smooth and consistent wire feed, reducing downtime and improving efficiency. Introducing the Multiprocess 5000: The Workhorse for Medium to Heavy-Duty Applications The Multiprocess 5000 is a powerful 400-Amps welding machine that takes welding to a whole new level. Capable of Stick welding, MIG welding, Flux cored welding, or TIG welding with a lift start, this robust and reliable workhorse is the perfect companion for all your medium to heavy-duty applications. Engineered for Tough Conditions Designed to withstand the harshest conditions, the Multiprocess 5000 is a true workhorse. Its heavy-duty, robust design ensures reliability, making it a dependable partner in the most demanding environments. Unparalleled Performance With high power at 100% duty cycle and tested in extreme temperatures of 104°F/40°C and 140°F/60°C, the Multiprocess 5000 delivers exceptional welding quality, precise arc striking, and a highly stable arc. Its fully encapsulated PCB protects against dust contamination, ensuring continuous performance even in challenging conditions. Optimal Welding Control The Multiprocess 5000 features automatic compensation for main power fluctuations within ± 20% and electronic continuous control of inductance, ensuring trouble-free welding and excellent CC/CV characteristics. Whether you're engaging in MIG/MAG, Flux-cored, or Stick welding (MMA), this machine offers exceptional welding characteristics. User-Friendly and Worry-Free Setting parameters is a breeze with the Multiprocess 5000's user-friendly design. It includes initial and final crater control for precise welding results and comes with a comprehensive 3-year warranty, giving you peace of mind and confidence in your investment. Choose Canaweld: Your Trusted Welding Partner Experience the power, versatility, and reliability of Canaweld's multi-process welding machines. From the oil and gas industry to various industrial applications, our welding solutions have been trusted by professionals worldwide. When it comes to welding machines and accessories, Canaweld is the name you can trust. Unlock the potential of your welding projects with Canaweld's cutting-edge technology and exceptional performance. Invest in a welding machine that delivers superior results and choose Canaweld for all your welding needs. View Details

Custom buoyancy options for color, depth rating, and covering area

Unleashing the Power of Custom Buoyancy Units for Subsea Robotics We are driven by a passion for innovation and a commitment to empowering the subsea exploration industry. Today, we are thrilled to introduce our latest breakthrough - Custom Buoyancy Units. These state-of-the-art buoyancy solutions are designed to enhance the performance and versatility of your subsea robotics, delivering unparalleled control and efficiency in every underwater mission. Tailored to Your Needs: Custom Buoyancy Options We understand that no two subsea missions are the same, and that's why our Custom Buoyancy Units offer a world of possibilities to cater to your specific requirements. From the color and depth rating to the covering area, you have the flexibility to customize every aspect of the buoyancy units, ensuring they align perfectly with your operational needs. Color Customization for Enhanced Visibility In the challenging depths of the ocean, visibility is paramount. Our Custom Buoyancy Units can be tailored in vibrant colors to improve visibility and tracking during underwater operations. Whether you need to differentiate between multiple ROVs in the water or simply want to enhance visual identification, our color options offer the solution you need. Optimal Depth Rating for Any Mission Every subsea mission comes with unique depth challenges. With our Custom Buoyancy Units, you have the power to choose the optimal depth rating that suits your specific application. From shallow-water surveys to deep-sea explorations, our buoyancy solutions are engineered to withstand the pressures of varying depths, ensuring your ROVs perform at their best. Covering Area: Precision Engineering for Stability Stability is crucial in subsea operations, and our Custom Buoyancy Units are meticulously designed to provide the perfect covering area for your ROVs. Through precision engineering and advanced materials, we offer buoyancy units that maintain the ideal balance between buoyancy and stability, resulting in smoother and more controlled underwater movements. Redefining Subsea Robotics As pioneers in subsea robotics, we continues to push the boundaries of innovation. With our Custom Buoyancy Units, we are reshaping the future of underwater exploration. By putting the power of customization in your hands, we enable you to unlock the full potential of your ROVs and achieve new heights in subsea missions. Unleash Your ROV's Potential Discover the limitless possibilities that await your subsea robotics with Custom Buoyancy Units. Elevate your underwater operations, optimize your ROV's performance, and gain an edge in your field with our cutting-edge buoyancy solutions. Contact Us Today Take the first step towards transforming your subsea missions with Custom Buoyancy Units. Our team of experts is ready to assist you in tailoring the perfect buoyancy solution for your unique needs. Embrace the power of customization and embark on a new era of subsea exploration with Ballycatter as your trusted partner. Contact us today to unlock the true potential of your subsea robotics. View Details

Drive Down Bailer

The Drive Down Bailer is used to collect samples or remove debris from the wellbore. The Bailer is jarred into the sample or debris forcing material into the cylinder, which is retained by a ball or flapper type non-return seat. The bailer is then jarred upwards and retrieved. Applications • Recovery of in-fill samples from wellbore or sump • Removal of compacted debris or sand from flow control devices View Details

Gas Blow-Off Valve 24 VDC

The 3” Gas Fuel Isolation Valve is designed for use in industrial gas turbines within the oil and gas sector, serving as a vital safety and control device. It regulates the flow of natural gas or compressor discharge air to the turbine, enabling quick isolation of fuel supply during abnormal or emergency conditions to protect the turbine from damage.

This valve features a three-inch outlet flange and is solenoid-pilot actuated, operating on 24 or 95-140 VDC power. It is engineered to withstand high-pressure environments, with natural gas operation rated up to 900 psig and compressor air up to 640 psig. It also endures elevated temperatures, tolerating heat soak conditions up to 400°F for natural gas and up to 800°F for compressor air applications.

Constructed from stainless steel materials compliant with NACE standards, the valve resists corrosion in harsh operating conditions typical in oil and gas facilities. It meets strict safety certifications, including CE-ATEX Group IIA, Category 3, Zone 2, T3, making it suitable for use in potentially explosive atmospheres.

The valve operates with a rapid opening time of approximately 110 milliseconds and closes within 1 second, enabling prompt response to operational changes or emergency shutdown signals. Typically installed in pairs to provide dual-redundancy, these valves enhance system safety by ensuring backup isolation capability.

Overall, the 3” Gas Fuel Isolation Valve is essential for maintaining safe, efficient, and reliable turbine operation by controlling and isolating fuel or air flow, thereby preventing damage and reducing the risk of costly downtime in oil and gas power generation applications.

View Details

Oil Spill Kit - 5 Gallon Bucket

The spill kit contains a curated selection of components designed for effective and targeted response to oil-based spills. 5 Oil-Only Absorbent Pads Size: Standard 8” x 11.5” Purpose: Swiftly absorb and contain oil-based liquids, preventing further spread and facilitating quick cleanup. 3 Oil-Only Absorbent Pillows Size: 18” x 18” Purpose: Larger pillows for enhanced absorption, particularly useful for managing larger volumes of spilled oil. 2 Oil-Only Absorbent Socks (3"x4') Size: 3 inches in diameter, 4 feet in length Purpose: Contain and control the spread of oil spills, especially effective in restricting the movement of liquids in confined spaces. Disposal Bags Purpose: Facilitate the proper containment and disposal of used absorbent materials, ensuring a responsible and hygienic cleanup process. Nitrile Gloves (1 Pair) Purpose: Essential personal protective equipment for safe handling during the cleanup, protecting hands from direct contact with oil-based substances. Advantages and Applications • The combination of pads, pillows, and socks caters to different spill sizes and scenarios, providing a versatile solution for oil-based spills. • The inclusion of larger pillows enhances the kit's capacity to address spills effectively, ensuring a swift and comprehensive cleanup process. • Nitrile gloves prioritize the safety of personnel involved in the cleanup, preventing direct contact with potentially harmful substances. • Disposal bags contribute to responsible waste management, ensuring the proper containment and disposal of used absorbent materials. The spill kit is well-suited for a range of industrial operations, where oil-based spills may occur. Its comprehensive components make it a valuable tool for addressing various spill sizes and ensuring a quick, efficient, and environmentally responsible cleanup process. The spill kit boasts a total absorption capacity, capable of absorbing up to 15 liters (3.87 gallons) of liquid. This capacity signifies the kit's effectiveness in managing spills of varying sizes, making it a reliable and versatile solution for fluid cleanup. Whether addressing smaller incidents or more substantial spills, the spill kit's impressive absorption capacity ensures a comprehensive and efficient response to liquid-based challenges. Water-Resistant Spill Kit is designed for oil-based spills, showcasing water-resistant properties. The kit's composition ensures effective cleanup of oil spills in diverse environments, including land, rivers, lakes, and oceans. By selectively absorbing oil while repelling water, it provides a reliable solution for managing oil spills in various settings, making it versatile and suitable for a wide range of spill response scenarios. View Details

TIG AC/DC 201 Pulse-D

4 1/2" HP-6 Hydraulic Set High Angle Production Packer

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

5" Mech-2 Double Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Check Valves

Maximize Well Integrity and Safety with HOCA Oil Tools' BHP Tool Accessories In the complex and demanding realm of oil and gas extraction, ensuring well integrity and optimizing production are paramount. HOCA Oil Tools rises to this challenge with our premium BHP (Bottom Hole Pressure) Tool Accessories, specifically designed to enhance the performance and reliability of downhole pressure monitoring systems. These accessories, vital for the precise measurement and control of well conditions, are engineered to complement our BHP tools, facilitating accurate data acquisition and ensuring well safety. HOCA’s BHP Tool Accessories: Elevating Downhole Precision and Reliability Our BHP Tool Accessories range includes various components crucial for the efficient operation of bottom-hole pressure tools. From specialized adaptors that ensure secure fittings to protective carriers designed to safeguard sensitive instruments during deployment and retrieval, each accessory is crafted to meet the highest standards of quality and performance. By addressing the unique challenges of downhole environments, HOCA Oil Tools provides the oil and gas industry with solutions that not only meet but exceed operational demands. Experience the Difference with HOCA Oil Tools Opting for HOCA Oil Tools' BHP Tool Accessories means choosing a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to innovation and quality ensures that our products not only meet industry standards but also provide the reliability and performance essential for today's challenging oilfield environments. By integrating our BHP Tool Accessories into your operations, you are not only optimizing your downhole monitoring capabilities but also investing in the safety and longevity of your equipment. With HOCA Oil Tools, you gain access to a comprehensive suite of solutions designed to elevate your operational success. Choose HOCA Oil Tools for your BHP Tool Accessories and join the ranks of industry professionals who trust our products to enhance their downhole operations. Partner with us, and unlock the full potential of your oil and gas extraction activities with tools and accessories crafted for excellence. With HOCA Oil Tools, empower your downhole operations with precision-engineered solutions that deliver unmatched performance and reliability. View Details

LM2500+G4 SAC 50Hz CC 1x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

View Details

Gas Check Valve for LM2500 Gas Turbine

The Gas Check Valve is a unidirectional valve used in LM2500 gas turbine systems to prevent the reverse flow of combustion gases into critical fuel and oil lines. Its primary function is to maintain the correct flow direction, ensuring that gases only travel toward the combustion chamber and not back into upstream components, where reverse flow could cause damage, safety risks, or system inefficiencies.

This check valve is engineered to operate under the high-pressure and high-temperature conditions typical of industrial gas turbine environments. It serves as a passive safety component, requiring no external power to function, and contributes to the overall reliability and integrity of the turbine system.

Commonly found in aero-derivative gas turbines used in oil and gas applications, the check valve is essential for maintaining proper system performance. Its inclusion in the turbine’s gas path helps ensure safe operation by minimizing the risk of combustion gas contamination in auxiliary systems.

View Details

10 3/4" Mech-1 Single Grip Mechanical Set Packer

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Tube Fittings Bulkhead Male Connector NPT Thread – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 7/8”, 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Tube Fittings Bulkhead Male Connector NPT Thread is a specialized fitting designed to pass tubing securely through panels, enclosures, or bulkheads while maintaining a reliable, leak-tight seal. It is suitable for high-pressure applications up to 6000 PSI and is manufactured according to ASME B16.34, MSS-SP-99, and ASME B31.3 standards, ensuring safety, reliability, and compatibility with industrial systems.

Its bulkhead design allows the tubing to be firmly supported at the barrier, reducing stress on the tubing, preventing vibration-induced leaks, and providing consistent sealing performance under pressure, vacuum, or dynamic conditions.

The NPT male thread enables direct connection to piping, valves, or other threaded components, making installation straightforward and versatile. Precision-machined components ensure that ferrules deform correctly for an optimal seal, while silver-plated threads reduce friction and minimize galling during assembly. Case-hardened ferrules and a robust body material provide durability under repeated assembly or exposure to high vibration, thermal cycling, or corrosive environments.

The design also allows for easy disconnection and retightening without compromising the seal, providing flexibility for maintenance or system changes. Tubing must be properly inserted to the shoulder of the fitting body to ensure maximum sealing efficiency, emphasizing that tubing selection and handling are integral to optimal performance.

Overall, this fitting provides a reliable, high-performance solution for routing tubing through barriers in demanding industrial environments, combining ease of installation, high-pressure capability, and long-term durability with precision engineering suitable for critical oil and gas or process applications.

View Details

Structured Cabling

Structured Cabling by Nulux Network Solutions: The Bedrock of Your Resilient Network Infrastructure in the Oil and Gas Industry In the intricate and unrelenting realm of the oil and gas industry, the backbone of successful, uninterrupted operations rests on a sturdy network infrastructure. Not merely a conduit for communication, but a veritable lifeline that ensures every unit, every device, and every system communicates seamlessly, securing the continuous flow of vital data across every echelon of your business. This is where Nulux Network Solutions champions your endeavors through our unparalleled expertise in Structured Cabling. Nulux Network Solutions: Your Harbor in the Tempest of Network Demands Your venture into the industrious domains of energy extraction and refinement is formidable, laden with challenges that demand a network just as robust and reliable as the spirited teams operating within. Nulux, with a lauded heritage of over two decades, curates tailored copper cabling networks, ensuring that your network infrastructure stands unwavering amidst operational rigors. While our specialization permeates various strands of telecommunications and networking, structured cabling, particularly utilizing copper, becomes a focal point for businesses that demand: High-Bandwidth Transmission: Facilitating transmissions up to 10 Gbps, ensuring your data flows unrestrained. Reliability: A steadfast performance, ensuring your operations are never hampered by network downtimes. Cost-Effectiveness: A pragmatic solution that assures optimal performance without burdening operational costs. Copper Cabling by Nulux: The Confluence of Flexibility, Durability, and Affordability Structured cabling, particularly utilizing copper, furnishes your business with a network that is not just remarkably flexible, easily terminated, and reliable, but also phenomenally durable, ensuring that the infrastructure remains unfazed amidst the most demanding operational scenarios. Nulux enhances this inherent virtue of copper cabling by ensuring: Holistic Network Solutions: From the embryonic stages of design and planning to installation and life cycle support. Upgrades & Evolution: Ensuring your network is never obsolete, perpetually evolving in tandem with technological advancements. Tailored Solutions: Customizing solutions that cater explicitly to your voice, data, and video service requirements, ensuring no aspect of your operations is ever compromised. Immerse Your Operations in a Cocoon of Network Security and Reliability Navigating through the complexities of DCS network upgrades and deploying copper cabling systems, encompassing telephone, ethernet, coax, and hybrid networks, Nulux has not just crafted but meticulously refined our approach towards network solution delivery. Our commitment towards delivering high-quality, high-performance networks at affordable rates has been unwavering and resolute. Steer Your Business Towards Operational Excellence with Nulux Your business, deeply embedded in the vital sectors of energy, seeks more than just a service provider. It seeks a partner that comprehends the profundity of operational demands and curates solutions that are not merely effective but exemplary. Nulux Network Solutions invites you to experience a partnership where your network demands are met with solutions that are not merely about connectivity but about ensuring your operational pulse never falters. Reach out to us today, and let’s architect a network that becomes the silent, steadfast guardian of your operations, ensuring every bit of data traverses with reliability, every communication occurs seamlessly, and your business thrives amidst the operational challenges of the energy sector. View Details

Hydraulic Set Retrievable 5 ½” Production Packer

The HP-1 Hydraulic Set Retrievable Production Packer is a critical downhole tool that enhances well integrity, operational flexibility, and production efficiency. Designed for production, injection, and zonal isolation, it allows operators to securely seal the wellborewithout requiring tubing manipulation, reducing rig time and operational complexity. The hydraulic setting mechanism ensures precise deployment at any depth, making it especially valuable for low hydrostatic head wells and multi-packer completions.

This packer minimizes risk and enhances asset performance by providing a reliable, mechanically locked seal that maintains integrity despite pressure fluctuations or tubing movement. The hydraulic hold-down system and multiple packing elements ensure a secure, long-term seal, reducing intervention costs and the risk of production loss. Its retrievable design—with both straight-pull and optional rotational release—improves well servicing efficiency, reducing downtime and workover expenses.

By integrating the HP-1 packer into completion strategies, producers can achieve higher operational efficiency, improved well performance, and lower overall costs. Its versatile application in production and injection wells makes it a strategic investment for optimizing reservoir management and maximizing hydrocarbon recovery in both conventional and challenging well environments.

View Details

Wisdom Cap Lamp KL8M

Revolutionize Your Mining Experience with the Wisdom KL8MS Corded Miner's Cap Lamp from Provix Are you looking for a reliable, powerful, and safe lighting solution for your mining activities? Look no further than the Wisdom KL8MS Corded Miner's Cap Lamp, offered by Provix. This state-of-the-art cap lamp is designed to meet the rigorous demands of underground mining environments, ensuring both safety and efficiency. Unmatched Lighting Performance The KL8MS features a high-capacity 10,400mAh battery, providing a continuous discharging time of 13 hours, ensuring long-lasting performance for extended shifts. Its main light LED, with a working voltage of 3.0V and power of 2.67W, delivers an impressive luminous flux of 430 lm. This powerful lamp illuminates your work area with a stunning 18,000 lx lighting degree, making it one of the brightest on the market. Built to Last Durability is key in mining equipment, and the KL8MS doesn’t disappoint. With a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours, this lamp is built to endure. The battery life is equally impressive, offering 1,200 cycles under reasonable working conditions. Safety First Safety is paramount in mining, and the KL8MS cap lamp is designed with this in mind. It’s explosion-proof, complying with ATEX GROUP II standards, and boasts an IP68 waterproof rating. The short circuit protect time of less than 320 μs adds an extra layer of safety, ensuring peace of mind in challenging conditions. Convenient and Comfortable Design Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL8MS is designed for comfort and ease of use. The battery box measures a compact 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), making it unobtrusive and comfortable to wear during long shifts. Easy and Efficient Charging The KL8MS is rechargeable via USB, offering a convenient charging solution. With a charging time of only 5.5 to 10 hours, the lamp is quickly ready for use, minimizing downtime. Get Yours Today! Experience the superior performance and safety of the Wisdom KL8MS Corded Miner's Cap Lamp. Visit Provix at 3 Greengage Road, New Lowell, ON L0M 1N0, call us at +1 (888) 434-0253, or email sales@provix.net. For more information, visit our website at www.provix.net. Elevate your mining operations with the Wisdom KL8MS, your ultimate lighting solution. View Details

3” Tubing End Locator

The 3” Tubing End Locator is a mechanical downhole tool used to identify the precise end of a 3-inch production tubing string during well intervention operations. It provides a clear physical indication when the tool reaches the bottom of the tubing, helping to ensure accurate placement of equipment inside the well.

Designed specifically for tubing with a 3-inch outer diameter, the tool features a maximum outside diameter of 2.500 inches. This sizing ensures smooth movement within the tubing while maintaining close contact, allowing the tool to operate effectively without the risk of sticking or misalignment. At the core of the design is a spring-loaded finger mechanism that extends outward when the tubing end is reached. This mechanical movement is transmitted to the surface as a tactile response, signaling that the tubing bottom has been contacted.

The tool includes standard threaded connections—such as a 15/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—which makes it compatible with a variety of toolstring configurations. It can be easily incorporated into slickline, wireline, or coiled tubing assemblies without the need for special adapters.

Constructed from durable, corrosion-resistant materials, the tubing end locator is built to perform reliably in downhole environments that involve high pressure, elevated temperature, and exposure to fluids. Its fully mechanical operation ensures a high level of dependability and minimizes the need for maintenance, especially in conditions where electronic systems may not be suitable.

The 3” Tubing End Locator is a practical solution for confirming tubing depth when preparing the well for further intervention.

View Details

Plug Chokes for Tubing

Elevate Downhole Efficiency with HOCA Oil Tools' Plug Chokes for Tubing In the rapidly evolving landscape of the oil and gas industry, achieving optimal control and efficiency in downhole operations is crucial. HOCA Oil Tools, at the forefront of downhole technology innovation, introduces its Plug Chokes for Tubing – specialized tools designed to revolutionize fluid flow control within the wellbore. Crafted with precision and built to meet the highest industry standards, our Plug Chokes are engineered to enhance the performance and safety of downhole operations. HOCA’s Plug Chokes for Tubing: Precision Control, Unmatched Durability Our Plug Chokes for Tubing are designed for operators who demand precise fluid flow control in their downhole operations. These tools are crucial for managing production rates, minimizing fluid losses, and optimizing well performance. Constructed from high-grade materials resistant to corrosion and wear, HOCA's Plug Chokes ensure reliability and durability under the harshest downhole conditions. Experience the HOCA Oil Tools Advantage Opting for HOCA Oil Tools’ Plug Chokes for Tubing means choosing a solution that stands for innovation, efficiency, and reliability. Our commitment to excellence ensures that our products not only meet but exceed the demands of modern oilfield operations, providing our clients with tools that enhance their downhole success. Integrating our Plug Chokes into your downhole operations marks a step toward enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just a supplier; you gain a strategic partner committed to supporting your operational challenges with advanced solutions and comprehensive service. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Plug Chokes for Tubing. Partner with us, and take your downhole operations to new heights of efficiency and performance. With HOCA Oil Tools, empower your downhole activities with tools that set new standards for reliability, control, and performance in the challenging oil and gas industry. View Details

Storm Choke 1-1/2 inch K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

HDI 1000B Pressure Gauge System

The HDI 1000B Pressure Gauge System is an intrinsically safe, battery-powered, solid-state electronic pressure gauge designed for accurate and reliable pressure measurement in demanding industrial environments. It measures pressures ranging from 30 psi up to 20,000 psi with an accuracy of ±0.50% of full scale. The system features a durable design with no fluids or moving parts, reducing maintenance requirements and improving long-term reliability.

The gauge includes a clear liquid crystal display (LCD) that combines a five-digit numeric readout for precise pressure values with a 101-segment analog bar graph for quick trend visualization. The display is easily readable in various lighting conditions and includes a low battery indicator to ensure continuous operation.

The 1000B system is modular, comprising a gauge display, inline cable, and sensor assembly. This design allows the display to be positioned close to or remotely from the pressure measurement point, providing flexibility in installation. The system supports multiple connection types including 2” Male NPT, 2” 1502, 2” 2002/2202, or flanged connections to fit different piping standards.

Power is supplied by a replaceable internal 3.6 VDC battery pack, which typically lasts up to 18 months during continuous operation. The gauge system is designed to retain calibration and settings during battery changes or power interruptions, enhancing reliability in field use.

For integration with control systems, the 1000B offers optional 4-20 mA or 0-1 V outputs, enabling remote monitoring, data logging, or connection to PLCs and chart recorders. The system is built to withstand high vibration environments, making it suitable for offshore, drilling, and other heavy industrial applications.

Overall, the 1000B Pressure Gauge System provides a precise, low-maintenance, and versatile solution for pressure measurement needs where safety, accuracy, and durability are critical.

View Details

ROV Console and Monitor Racks

Custom ROV Console and Monitor Racks: Unleashing the Power of Personalization in Subsea Operations We understand that no two subsea missions are alike. Each expedition presents unique challenges and requires specific tools to achieve success. That's why we are proud to introduce our state-of-the-art Custom ROV Console and Monitor Racks, designed to cater to your specific ROV missions like never before. Your Mission, Your Configuration Gone are the days of adapting generic consoles to your unique needs. With the Custom ROV Console and Monitor Racks, you have the power to create a setup tailored precisely to your mission requirements. Our team of experts collaborates closely with you to understand the intricacies of your underwater objectives. Whether you need additional video inputs, specialized controls, or specific telemetry interfaces, we've got you covered. Unmatched Flexibility and Versatility Designed for seamless integration, our Custom ROV Consoles and Monitor Racks offer unparalleled flexibility and versatility. Whether you're exploring the depths of the ocean, conducting pipeline inspections, or conducting scientific research, our customized solutions ensure your ROV is equipped to handle any challenge. Enhanced Efficiency and Productivity Efficiency is the cornerstone of successful subsea operations. With a bespoke ROV console, you can optimize your workflow, reducing operational downtime, and maximizing productivity. Customized monitor racks allow you to monitor crucial data and video feeds effortlessly, providing you with real-time insights for quick decision-making. Uncompromising Quality and Reliability When it comes to subsea missions, there's no room for compromises. Our custom ROV consoles and monitor racks are crafted with the highest quality materials and cutting-edge manufacturing techniques, ensuring longevity and reliability in every venture. The Advantage • Expert Consultation: Our team of skilled professionals works with you to understand your unique mission requirements, ensuring a tailored solution that aligns perfectly with your goals. • Innovative Design: With a focus on innovation, our custom ROV consoles are equipped with the latest technology, empowering you with the tools you need for successful subsea exploration. • Rigorous Testing: Before delivery, every custom ROV console and monitor rack undergoes rigorous testing and quality checks, guaranteeing flawless performance in the field. • Exceptional Support: we are committed to providing unparalleled customer support throughout your journey. Our team is always ready to assist you with any questions or technical support you may need. Unlock the Full Potential of Your ROV Missions Don't settle for off-the-shelf solutions that don't meet your exact requirements. With the Custom ROV Console and Monitor Racks, you have the power to shape your subsea destiny. Let us help you design the perfect setup to conquer the depths and revolutionize your ROV missions. Contact us today to explore the limitless possibilities of personalized subsea exploration! View Details

Onshore Electric Line Services

Revolutionizing Wellbore Diagnostics with InWaTec Combined's Onshore E-Line Services In the world of oil and gas exploration and production, knowledge is power—and power lies in the data. At InWaTec Combined, we understand that the foundation of effective well servicing is the precision and reliability of information obtained from deep within the Earth. That's where our Onshore Electric Line (E-Line) services come into play, a game-changer in the realm of wellbore diagnostics. An E-Line is, in essence, an electric cable capable of performing extraordinary tasks. Lowered into the wellbore, this lifeline serves as a crucial conduit between the heart of the well and the watchful eyes of our engineers. Its primary function is to transmit data regarding wellbore conditions, a task it performs with exceptional efficiency and accuracy. The brilliance of the E-Line service lies in its simplicity and its capability. As it descends through the geological layers, the e-line gathers critical data through logging activities, painting a clear and comprehensive picture of the well's status. This information is not just data; it is a narrative of the well's health, productivity, and potential. Our E-Line services are not merely about data collection; they are about enabling informed decision-making that can lead to enhanced production efficiency, increased safety, and minimized environmental impact. With precise information, interventions can be smarter, quicker, and more effective, leading to a significant reduction in downtime and operational costs. InWaTec Combined's commitment to excellence in E-Line services is unwavering. We invest in cutting-edge technology and the continuous training of our specialists to ensure that our clients receive the most reliable and advanced diagnostic services available. We're not just service providers; we're partners in your quest to unlock the full potential of your assets. In a sector where every decision counts, InWaTec Combined's Onshore Electric Line services stand as your assurance of precision, reliability, and insight. Let us illuminate the depths of your wellbore with data that drives success. View Details

HDI 3300 Temperature Gauge System

The HDI 3300 Temperature Gauge System is an intrinsically safe, battery-powered electronic temperature measurement device commonly used in oil and gas operations requiring precise temperature monitoring. Typical applications include high-pressure nitrogen pumping, geothermal and mud-based drilling, well control manifolds, flare stacks, and bulk liquid storage.

The system consists of a digital gauge display, sensor assembly, and interconnecting cable. The sensor, usually a Resistance Temperature Detector (RTD), is housed in a durable stainless steel case with various mounting options like 2-inch Male NPT, hammer unions, or flanges, allowing flexible installation near the temperature source.

The display features an LCD with numeric and analog bar graph outputs, providing temperature readings with 0.1-degree resolution and ±0.5% full-scale accuracy over a range of -50 to 150°C (-50 to 300°F). Users can switch between Celsius and Fahrenheit. It includes 4-20mA and 0-1 VDC output options for integration with remote monitoring, data logging, or control systems, and supports external power inputs.

Designed for ease of maintenance, the system is field-repairable with a replaceable battery pack. The sensor and display are factory-matched and calibrated, requiring recalibration if components are replaced. The gauge fits standard 6-inch panel cutouts and supports multiple mounting patterns. Cable lengths are customizable up to 200 feet or more.

The system operates reliably in temperatures from -40°C to +70°C and is certified for hazardous environments, with a rugged stainless steel sensor housing to withstand harsh field conditions.

The 3300 is well-suited for environments requiring precise, continuous temperature monitoring, including high-pressure drilling, well control, and fluid storage applications. Its intrinsically safe design provides dependable operation in hazardous locations without compromising safety. The solid-state electronics and durable construction reduce maintenance and downtime, while versatile mounting options allow placement close to the measurement point for accurate readings. Featuring clear numeric and bar graph displays along with remote output capabilities, the system supports timely decision-making and integrates easily with larger monitoring setups, enhancing process control and operational safety in demanding conditions.

View Details

Pump Skids

Our pump skids can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these units are highly reliable and easy to operate. Clients use our pump skids multiple uses including; corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, Nitrate injection, and more. These skids are rated for offshore and onshore use and can be custom ordered for your specific needs. View Details

Broaching Tool Runs

InWaTec Combined: Precision Perfected with Our Broaching Tool Running Services In the complex tapestry of well service operations, precision is not just a goal—it's a necessity. At InWaTec Combined, we infuse this precision into every aspect of our work, especially when it comes to preparing wellbore tubing for subsequent interventions. Our Broaching Tool Running services epitomize this commitment, ensuring that wellbore tubings are in optimal condition for running or pulling service tools. The Critical Role of Broaching The wellbore is the heart of any drilling operation, and like any heart, it must be free from obstructions to function correctly. Enter the broach—InWaTec Combined’s answer to the industry's need for flawless tubing surfaces. Our broaching tools are engineered to meticulously remove metal burrs and imperfections that could jeopardize the integrity of service operations. By ensuring a clean and smooth tubing wall, we set the stage for efficient and trouble-free servicing. Advanced Broaching Technology Our broaching tools are not just tools; they are precision instruments. Equipped with graduated rings, diamonds, or segments, our broaches are case-hardened to withstand the rigors of the well environment. Their highly sharpened edges are designed to cut through imperfections with surgical precision, leaving behind a surface that meets the industry's highest standards. The InWaTec Combined Edge When you choose InWaTec Combined for broaching tool running services, you're not just getting a service; you're acquiring a partnership that values excellence. We understand that the quality of broaching directly impacts the success of your subsequent operations. That's why we've invested in developing a team of experts and a fleet of tools that stand unrivaled in quality and performance. Ensuring Success Down the Line Our broaching service is a critical precursor to a variety of downhole operations. By preparing your tubing with our broaching tools, you are ensuring that subsequent tools can be run or pulled with minimal risk of snagging or damage, thus preserving the integrity of your operations. This not only saves time but also reduces the likelihood of costly interruptions. Your Assurance of Quality At InWaTec Combined, our reputation is built on the back of our commitment to quality and precision. Our broaching tool running services are a testament to this promise. We don’t just deliver a service—we ensure that your wellbore is in the best possible condition for whatever comes next. In conclusion, with InWaTec Combined's Broaching Tool Running services, you can rest assured that the critical first step in your well servicing operations is in the most capable hands. Our precision tools and expert operators stand ready to deliver a seamless service experience that sets a solid foundation for your well's longevity and productivity. View Details

5-1/2 inch Wireline Retrievable FXE SCSSV

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Tube Fittings Male Connector NPT – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 7/8” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Tube Fittings Male Connector NPT are used to connect tubing directly to threaded pipe systems, ensuring a secure and leak-tight joint in fluid and gas applications. The male NPT threads allow compatibility with standard pipe threads.

These fittings are unique due to their twin ferrule design, which provides a strong mechanical grip on the tubing while creating a reliable seal without requiring welding or additional sealants. The precision-machined ferrules deform evenly to prevent leaks, even under vibration, impulse, or high-pressure conditions.

Straight fittings are manufactured from bar stock, and shaped fittings are made from forgings, offering high structural strength. The case-hardened back ferrules and silver-plated female threads reduce wear and prevent galling, while the radius junction in elbows maintains smooth flow.

Installation is simplified: the tubing is inserted fully to the shoulder of the fitting, and the nut is tightened to specific torque, producing a secure connection. Male Connector NPT fittings are ready for immediate use and can be disassembled and retightened if needed.

Their combination of threaded pipe compatibility, twin ferrule sealing, and ease of installation makes them reliable and widely used in demanding industrial applications.

View Details

3-1/2 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

S-KWIK Control Line and Cable Protector

4” Tubing End Locator

The 4” Tubing End Locator is designed specifically for use with larger production tubing strings common in wells that require greater flow capacity or enhanced mechanical strength. This size is typically found in wells with higher production rates or more demanding operational requirements, where accurate depth confirmation becomes even more critical.

This model is specifically sized for 4-inch outer diameter tubing, featuring a maximum outside diameter that fits comfortably within the tubing’s internal dimensions. This sizing ensures that the locator can move smoothly without obstruction while maintaining effective contact to detect the tubing end. The core mechanism involves a spring-loaded finger that extends outward upon contacting the tubing bottom. This movement translates into a tactile signal felt at the surface, eliminating the need for complex electronic systems and reducing the risk of failure in harsh downhole environments.

Equipped with standardized threaded connections—commonly a 1-9/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—the tool integrates easily into typical slickline, wireline, or coiled tubing toolstrings. The fully mechanical design enhances reliability, making it well-suited for use in conditions of high pressure, elevated temperatures, and corrosive fluids often found in oil and gas wells.

The 4” Tubing End Locator is especially valuable in wells with larger tubing sizes where accurate depth confirmation is critical to avoid operational errors. By providing a straightforward and dependable method to locate the tubing end, it supports safe and efficient well intervention, helping to reduce downtime and operational risks.

View Details

5 1/2” SCSSSVs for High-Pressure Well Control

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 5 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) serves a critical safety function by enabling rapid well shut-in if uncontrolled flow occurs due to equipment malfunction or damage. Positioned in the upper section of the wellbore, this valve acts as a barrier to isolate the production pathway, helping to prevent uncontrolled release of fluids and protect personnel, equipment, and the environment.

Its fail-safe design means that any loss of control pressure or system failure causes the valve to close automatically, ensuring well integrity even in emergency situations. The valve uses a wireline-retrievable flapper mechanism that is surface-controlled, allowing operators to maintain or replace key components without pulling the tubing string—significantly reducing downtime and operational costs.

Engineered for wells utilizing 5 1/2" (139.70 mm) tubing, this valve fits landing nipples with a 4.562” seal bore and supports working pressures up to 5,000 psi. The internal valve diameter of 2.38” is designed to balance flow efficiency and tool passage capability. Additionally, by positioning the sealing surfaces outside the flow path when open, the valve minimizes wear caused by erosive fluids, enhancing durability and service life.

This SCSSSV provides a reliable, maintainable solution for well control in demanding operational environments, combining robust construction with practical features to support continuous production and rapid emergency response.

View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 47-53.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details