Ballycatter.ca - Industrial Equipment

Hard Hat with full brim drillers hard hat and 6 point ratchet strap

This drillers hard hat is made of polyethylene with a six-point ratchet suspension type. This hard hat is available in green, is size 6 1/2 to 8, and meets CSA Z94.1-2005 standards. ANSi classification is Type 1 Class E This brim offers 360-degree protection from falling objects, chemical splash, and weather elements like the sun and rain. Full brim hard hats allow for added protection from the elements without reduced visibility. These hard hats also provide more protection against falling objects and the sun by providing more shade than a cap style helmet. Pricing is based on minimum order of 20, for smaller orders please make contact for alternatives. View Details

Hydraulic cylinder for various industrial applications

A hydraulic cylinder is a mechanical actuator that is used to give a unidirectional force through a unidirectional stroke. The hydraulic cylinder consists of a cylinder barrel, in which a piston connected to a piston rod moves back and forth. The barrel is closed on one end by the cylinder bottom (also called the cap) and the other end by the cylinder head (also called the gland) where the piston rod comes out of the cylinder. The piston has sliding rings and seals. The piston divides the inside of the cylinder into two chambers, the bottom chamber (cap end) and the piston rod side chamber (rod end/head-end). View Details

LM2500+G4 SAC 50Hz SC Gas Turbine

The LM2500+G4 SAC 50Hz Simple Cycle is a fourth-generation aeroderivative gas turbine of the LM2500. Designed for industrial power applications, including those in the oil and gas sector, it delivers more output and greater thermal efficiency while retaining the ease of maintenance and high reliability the LM2500 series is known for.

In a simple cycle configuration, the gas turbine generates power directly by expanding hot gases through the turbine stages, without recovering heat for additional power generation. This design is favored for its simplicity, lower capital cost, faster start-up, and suitability for mobile or remote applications.

The LM2500+G4 improves upon its predecessor by increasing airflow and turbine cooling capacity, allowing for higher operating temperatures. These changes result in up to 40% thermal efficiency in simple cycle mode—an impressive figure for this class of turbine. This translates to improved fuel usage and reduced operational costs over time.

The engine features a Single Annular Combustor (SAC), which supports stable combustion with low emissions of nitrogen oxides (NOx) and carbon monoxide (CO). The combustor is also designed for durability and long life, with easily replaceable fuel nozzles and a thermal barrier coating for resistance to high temperatures and corrosion.

Its two-spool design means the engine has no cold start limitations, making it well-suited for harsh or variable environments. The power turbine and gas generator can be separated, allowing for easier in-module repairs and less downtime.

Overall, the LM2500+G4 SAC 50Hz Simple Cycle offers a balance of power, efficiency, and maintainability, making it an attractive solution for power generation and mechanical drive needs in industrial, onshore, and offshore oil and gas operations.

View Details

Control Room Wireless Links

Amplifying Control Room Capabilities through Robust Wireless Links by Nulux Network Solutions In the thriving pulse of the oil and gas industry, where operational precision and data integrity are pivotal, control rooms emerge as the neural centers orchestrating myriad operations with absolute finesse. At Nulux Network Solutions, we understand the paramount importance of seamless, secure, and robust communication for control rooms, ensuring that your operational harmony remains undisturbed amidst the cacophony of challenges posed by distance, terrain, and environmental factors. Nulux’s Control Room Wireless Links – Ensuring Uninterrupted Operative Symphonies Navigating through the technological and operational challenges, Nulux’s Control Room Wireless Links ensure that your data – the critical nerve of decision-making processes – travels seamlessly across the challenging terrains and distances, bridging your control room with the various operational nodes dispersed across diverse geographic locales. Wireless Connectivity – The Nulux Difference Our wireless solutions are meticulously crafted, ensuring: Seamless Connectivity: Bridging the communication gaps through point-to-point and multipoint configurations, tailored to meet your unique operational dynamics and challenges. Enhanced Reliability: With proven expertise in implementing robust wireless systems, we ensure that your control room is always in sync with the on-field operations, mitigating downtimes and enhancing decision-making processes. Optimized Cost-Effectiveness: Deploying wireless links that negate the need for extensive hardwired infrastructures, thereby ensuring that your operational efficiencies are not burdened by exorbitant capital expenditures. Intricate Comprehension of Wireless Technologies At Nulux, we prioritize understanding the subtle nuances and stark distinctions in wireless technologies, ensuring that your control room wireless links are not just communicatively optimal but are also operationally coherent. Point-to-Point Networks: Ensuring a dedicated, secure, and high-capacity data transmission channel between your control room and a fixed operational point. Multipoint Configurations: Crafting a network where the control room can communicate with multiple operational points through a single, secure, and reliable wireless channel. Safeguarding Your Data with Nulux In a world where data integrity and security are not mere necessities but vital operational prerequisites, our Control Room Wireless Links are fortified with robust security protocols, ensuring that your operational data is shielded from potential cyber threats, thereby facilitating a secure, reliable, and efficient operative environment. Engage with Operational Excellence Embark on a journey towards enhanced operational efficiencies with Nulux, where your control room is not just a strategic point but is the dynamic conductor of an orchestrated operational symphony. Our wireless links ensure that every note, every data point, is communicated, analyzed, and acted upon with absolute precision, ensuring that your operations resonate with reliability, efficiency, and absolute excellence. Unleash the true potential of your control room, ensuring that every decision, every action is backed by real-time data, secured communication, and the robust reliability of Nulux’s Control Room Wireless Links. Let’s sculpt an operational future where your decisions echo across the vast expanses of your operations, where your actions are timely, and where your control room truly controls, manages, and orchestrates your operational symphony with unmatched precision and reliability. Navigate with Nulux, where your pathways are not just connected but are securely, reliably, and efficiently interlinked. View Details

NWB-20 Charger

Power Up Your Mining Gear with the Wisdom NWB-20 Charger from Provix Provix is excited to present the Wisdom NWB-20 Charger, a high-efficiency portable charger that is a game-changer for mining professionals. Tailored to meet the demanding needs of the mining industry, this charger offers reliable, fast, and efficient charging for your equipment. Versatile and Efficient Charging Solution The NWB-20 Charger features a wide-ranging AC input of AC 100-240 V ± 10%, 0.24 A, 50-60 Hz, making it suitable for global use. Additionally, its DC input of 7~30 V, 1.7 A, adds to its versatility, allowing it to adapt to various power sources. Optimized for Wisdom Mining Lamps Designed to complement Wisdom's line of mining lamps, the NWB-20 provides a maximum DC output voltage of 4.20 ± 0.05 V and a DC output current of 2000 mA ± 100 mA. It ensures efficient charging times of 6.5 hours for the KL8M and 4.5-6.5 hours for the KL5M, reducing downtime and increasing productivity in mining operations. Compact, Lightweight, and Portable The NWB-20 Charger is designed for portability and ease of use. It measures 116 x 76 x 56 mm (4.6 x 3.0 x 2.2 in) and weighs only 215 g (7.58 oz), making it easy to carry and store. This compact design is ideal for miners who need a reliable charging solution on the go. Reliable and Durable Charging Accessory This charger is not just about power; it's about durability and reliability. Its robust construction ensures it can withstand the harsh conditions often found in mining environments, providing consistent performance over time. Get the NWB-20 Charger Today Upgrade your mining equipment with the Wisdom NWB-20 Charger for a more efficient, reliable, and portable charging solution. Visit Provix to learn more about how this charger can benefit your mining operations. Explore our products at www.provix.net or contact our team for detailed information. View Details

BlueROV2 by Blue Robotics

Unleash the Depths with BlueROV2 We are thrilled to introduce the BlueROV2, a versatile and high-performance Remotely Operated Vehicle (ROV) designed and built by the renowned experts at Blue Robotics Inc. Engineered to deliver exceptional value, the BlueROV2 is a testament to innovation, reliability, and affordability in the world of subsea exploration. Excellence in Stock and Ready to Ship! We understand that time is of the essence in subsea operations, which is why we have BlueROV2 units ready to ship immediately. Need an ROV tomorrow? Count on us to have one dispatched today. Meticulous Assembly and Testing The BlueROV2 is more than just a remarkable product; it represents the culmination of expertise and craftsmanship. Each unit is carefully assembled by our skilled technicians, who take pride in their work to ensure every detail is perfect. Before shipping, each BlueROV2 undergoes rigorous testing, calibration, and a comprehensive factory acceptance test to meet the highest standards of quality and performance. Explore the Configuration The BlueROV2 comes with a powerful and agile 6 thruster frame, offering you unparalleled maneuverability in the water. Crafted from robust aluminum tubes, the frame is built to endure the demanding conditions of underwater environments. The Newton Gripper enhances your ROV's capabilities, allowing you to interact with the underwater world effortlessly. Illuminate your subsea adventures with 4 Lumen lights, providing excellent visibility even in the darkest waters. To ensure seamless operation, we've equipped the BlueROV2 with a specially modified tether quick disconnect for hassle-free connections. With 150m of tether on a reliable reel, you have the freedom to explore vast distances below the surface. Your Complete ROV Package We believe in providing you with everything you need to embark on your underwater missions immediately. When you choose the BlueROV2, you get more than just the ROV; you receive a comprehensive package to enhance your subsea experience: 1. BlueROV2 as Configured: Ready to dive and explore right out of the box. 2. Fathom Spool with 150m Tether: Experience the freedom to roam with a generous length of tether. 3. 1 Battery + Charger: Stay powered up and keep your ROV running smoothly. 4. Upgraded Tools and Spares Kit: We've included essential tools and spares to keep your ROV at peak performance. 5. Seahorse Wheeled Transport Cases: Secure and transport your BlueROV2 effortlessly with foam-padded cases. Specifications • Shipping Dimensions: o Case 1 (ROV): 29”x 23”x 16”, 55lbs o Case 2 (Reel/Tether): 29”x 23”x 16”, 53lbs o Case 3 (Batt/Spares/Tools): 24”x 16”x 10”, 25lbs Assurance of Quality The BlueROV2 comes with a 90-day limited warranty, ensuring your peace of mind as you embark on your underwater adventures. Embrace Exploration with the BlueROV2 Are you ready to dive into the wonders of the deep? The BlueROV2 is your gateway to an awe-inspiring subsea world. Let the BlueROV2 be your trusted companion for your most ambitious subsea projects. Contact us today to dive deeper and discover the BlueROV2 difference! View Details

5" Mech-2 Double Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

3" Globe-Style Gas Metering Valve

The 3” Globe-Style Gas Metering Valve is designed to deliver accurate and consistent fuel control in industrial gas turbines, including both Dry Low Emissions (DLE) and Single Annular Combustor (SAC) engine types. This valve ensures that the correct amount of gas fuel is metered into the engine based on real-time operating conditions—essential for achieving stable combustion, optimal turbine performance, and reduced emissions.

With an accuracy of ±3% of flow point and a full-stroke response time of 175 milliseconds, it supports precise adjustments to the fuel-to-air ratio, even under fluctuating load conditions. This level of performance is critical for maintaining turbine efficiency, lowering NOx and CO emissions, and supporting regulatory compliance.

The globe-style design allows for smooth fuel flow control, making it ideal for high-capacity, high-pressure turbine applications, such as those found in the oil and gas industry. Built to withstand extreme temperatures and pressures, the valve is available with certifications such as ATEX Zone 1 and 2, PED, UL, and NEC Class 1, ensuring safe operation in hazardous environments.

This metering valve supports modern turbine control systems and is part of a generation of components that prioritize long-term reliability, reduced maintenance needs, and consistent field performance.

View Details

Hybrid Downhole Pump

The Sivam Hybrid Downhole Pump is a rod pump that utilises the existing tubing as the pump barrel. The standing valve is installed first in a tubing profile, and the travelling assembly is then installed. Dual barrier options such as the Rod Sentinel can also be installed and recovered using the Hybrid Downhole pump. The Hybrid Downhole Pump increases fluid production by maximizing rod pump barrel size, and installation costs are minimised by being through-tubing installable. An excellent choice for well testing existing completions that do not have artificial lift installed. When used in conjunction with the Rod Sentinel SCSSV the Hybrid Downhole Pump is capable of dewatering gas wells, rod pumping critical sour wells, or for installation on lower rate offshore wells. View Details

NIU - Pipe Inspection ROV

Introducing the NIU ROV: Your Ultimate Pipe Inspection Solution The NIU ROV - The Pipe Inspection Remote Operated Vehicle. Engineered to excel in pipe and tunnel inspections, the NIU ROV sets new standards for versatility, precision, and efficiency in the subsea industry. Unleash the Power of NIU ROV The NIU ROV is purpose-built to navigate the intricate and challenging environments of pipes and tunnels. With its compact design, this remarkable ROV can effortlessly maneuver through a 12-inch diameter pipe, providing unparalleled access to previously hard-to-reach areas. From industrial pipelines to underwater tunnels, the NIU ROV is your go-to solution for comprehensive inspections. Unparalleled Performance The NIU ROV is equipped with state-of-the-art technology and robust features that ensure exceptional performance in every operation. Its advanced thrusters enable precise movement and control, allowing operators to conduct inspections with utmost accuracy. The powerful onboard lighting system ensures crystal-clear visibility even in the darkest and murkiest conditions. Efficiency Redefined We understand the value of time and efficiency in subsea operations. The NIU ROV is designed to streamline your inspection processes, significantly reducing downtime and operational costs. Its ease of deployment and user-friendly interface enable quick setup and seamless integration into your inspection workflows. Tailored for Pipe and Tunnel Inspections Unlike generic ROVs, the NIU ROV is engineered specifically for the unique challenges of pipe and tunnel inspections. Its rugged construction and protective measures safeguard it from potential hazards encountered in these confined environments. With the NIU ROV, you can confidently conduct inspections with minimal risk and maximum efficiency. Cutting-Edge Technology The NIU ROV incorporates cutting-edge technology, including high-resolution cameras, to provide a comprehensive view of the inspection area. Its real-time data transmission capabilities allow operators to monitor and analyze data on the surface, making informed decisions on the spot. Unlock New Possibilities with NIU ROV From oil and gas pipelines to municipal infrastructure, the NIU ROV opens up a world of possibilities for inspecting critical subsea assets. Its adaptability and versatility make it an indispensable tool for various industries, including energy, construction, engineering, and more. Choose NIU ROV When you choose the NIU ROV, you not only invest in a top-of-the-line inspection solution but also gain access to our unmatched expertise and support. Our team of subsea specialists is ready to assist you every step of the way, ensuring that you harness the full potential of our advanced ROV technology. Embark on a New Era of Pipe Inspections Step into the future of subsea inspections with the NIU ROV - The Pipe Inspection Remote Operated Vehicle. Experience unparalleled performance, efficiency, and precision in your pipe and tunnel inspections. Contact us today to explore how the NIU ROV can revolutionize your subsea operations. Your success is our mission! View Details

Injection Safety MC Valve 2-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Injection Valve Subsurface Safety 4.48 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 20-23 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Offshore Mini Coil Unit

Navigating Offshore Challenges with InWaTec Combined’s Offshore Mini-Coil Services Offshore oil and gas operations come with a unique set of logistical challenges. In the face of limited deck space and crane capacity, traditional coiled tubing units (CTUs) often fall short in providing the necessary services without compromising operational economics. InWaTec Combined rises to the occasion with our Offshore Mini-Coil Services, designed to deliver efficient, cost-effective well intervention and maintenance solutions in even the most constrained offshore environments. Compact Efficiency: Our capillary/mini-coil CTU is a game-changer for offshore operations. Its compact design minimizes the footprint on the deck, providing a practical alternative to bulkier traditional units. This space-efficient solution is crucial on platforms where every square foot counts. Lift and Load Advantages: The lightweight nature of our Mini-Coil CTU addresses the common challenges of crane limitations. With the reduced load requirements, our Mini-Coil equipment can be easily maneuvered and set up, facilitating a range of well services without the need for heavy lifting equipment. Versatile Applications: Despite its compact size, the Mini-Coil CTU is robust in capabilities. It's adept at a multitude of tasks, from precision interventions like chemical treatments and scale removal to essential maintenance procedures and even wellbore cleanouts. Economic Solution: InWaTec Combined’s Offshore Mini-Coil Services are not just operationally advantageous; they also present significant cost savings. The reduced logistical demands coupled with the efficiency of our Mini-Coil operations translate into a more economical approach to servicing wells offshore. Customized Service Delivery: Understanding that no two wells or offshore platforms are the same, we offer customized Mini-Coil solutions tailored to the specific requirements of each operation. Our team of experts meticulously plans every aspect of the service delivery, ensuring that it aligns perfectly with our clients' operational and economic objectives. At InWaTec Combined, we are committed to innovation and excellence in offshore well services. Our Offshore Mini-Coil Services embody this commitment, providing operators with the assurance that even under the constraints of limited deck space and crane capacity, their wells can be serviced efficiently and effectively. Choose InWaTec Combined for your offshore well interventions, and experience the strategic advantage of our Offshore Mini-Coil Services. We are dedicated to optimizing your operations, ensuring that your offshore wells maintain peak performance with minimal disruption. Let us bring our compact, powerful solutions to your platform, where space is at a premium, but potential is limitless. View Details

PRV repalcement Turbine

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success. View Details

WellStar Tubing Retrievable Surface Controlled Subsurface Safety Valve 2-7/8 inch Halliburton

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details

ESP Straight Pull 7" Packer

The Ballycatter Model WC-ESP Straight Pull 7” Packer is a hydraulic-set production packer built for ESP completions in 7” casing, offering secure wellbore isolation and efficient ESP deployment. Its pass-through section ensures uninterrupted power delivery to the ESP unit, while the bi-directional slips anchor the packer against pressure fluctuations and tubing movement. Designed for high-pressure and high-temperature wells, its single-piece mandrel construction and Acner Array Packing Element provide exceptional durability and sealing reliability.

The WC-ESP Straight Pull 7” Packer is set hydraulically by pressurizing the tubing against a plugging device, locking the packer in place for long-term performance. The straight pull retrieval mechanism enables fast and hassle-free removal, reducing intervention time and operational costs. Compatible with all major cable pack-off or feed-thru devices, this packer is a versatile, high-performance solution for ESP completions in medium-sized casing applications.

View Details

Wire Brush for Slickline

Achieve Superior Wellbore Cleanliness with HOCA Oil Tools' Wire Brush In the demanding realm of oil and gas extraction, the cleanliness and integrity of wellbores are paramount for operational success. Recognizing this critical need, HOCA Oil Tools has developed a premier solution: the Wire Brush, an essential component of our comprehensive downhole slick line tools portfolio. Designed to tackle the toughest wellbore contaminants, our Wire Brush is engineered for excellence, ensuring your operations maintain peak efficiency and safety. HOCA's Wire Brush: Pioneering Downhole Cleanliness At HOCA Oil Tools, we understand that every downhole environment poses unique challenges. That's why our Wire Brush is meticulously crafted to remove deposits, scale, and other obstructions with unmatched efficiency. Constructed from durable materials capable of withstanding harsh downhole conditions, the HOCA Wire Brush is your ally in maintaining wellbore integrity and optimizing production flow. Elevating Downhole Maintenance with HOCA Oil Tools Innovation, quality, and customer satisfaction are at the core of HOCA Oil Tools' mission. Our Wire Brush exemplifies these values, providing a solution that not only meets but exceeds the demands of modern downhole operations. With the HOCA Wire Brush, operators can expect a level of cleanliness and efficiency that sets new industry standards. Adopting the HOCA Wire Brush into your downhole cleaning regimen is an investment in your operation's future. It signifies a commitment to operational excellence, safety, and cost-effectiveness. Our dedicated team at HOCA Oil Tools is committed to supporting your success by providing superior downhole solutions that address the specific challenges of the oil and gas industry. Embrace the future of downhole maintenance with HOCA Oil Tools’ Wire Brush – your solution for maintaining pristine wellbores and maximizing operational outcomes. Experience the difference that comes with using tools crafted for excellence and backed by an unwavering commitment to your operational success. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Wire Brush to keep their operations running smoothly, safely, and efficiently. View Details

Monoflange SBB Double Block & Bleed Valve – Flange x Thread – OS&Y Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange SBB Double Block and Bleed Valve with Flange x Thread connections features an OS&Y isolation valve and a needle drain, providing dual isolation in a single compact assembly. It is designed for oil and gas applications where safe venting of trapped pressure between isolation points is required, such as instrument or gauge isolation, chemical injection, and sampling lines.

The valve’s monoflange design integrates both isolation and venting functions in one unit, reducing the number of joints and potential leak paths while saving space and simplifying installation. The OS&Y isolation valve offers clear visual indication of open or closed status, allowing operators to quickly verify valve position. The needle drain provides controlled venting of pressure trapped between the isolation points, ensuring safe operation during maintenance or sampling procedures.

The valve is suitable for flange sizes from 1/2” to 2” and pressure classes from 150 to 2500, with options for reduced or full bore depending on process requirements. It is available in a variety of materials including stainless steel 316, 316L, duplex, super duplex, Hastelloy, Inconel, and Monel, and can be manufactured to meet NACE MR-0175 standards. The design complies with recognized standards such as ASME B16.34, API 6D, and ISO 17292, and is tested to low emission requirements.

This configuration is ideal for oil and gas operations requiring reliable dual isolation, precise venting, and compact installation in critical piping systems.

View Details

Monoflange DBB Double Block & Bleed Valve – Flange x Thread – OS&Y and Needle Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange DBB Double Block & Bleed Valve Flange x Thread with OS&Y and Needle Isolation is designed to provide reliable dual isolation with a controlled bleed in a single assembly. This configuration replaces the need for multiple individual valves, reducing the number of potential leak points and simplifying installation in oil and gas applications. The first isolation is achieved using an OS&Y valve, while the second isolation and the drain function use a needle valve, providing precise control over fluid venting and depressurization.

This valve is suitable for instrument and gauge isolation, chemical injection points, sampling connections, and direct or remote mounting of instruments. It supports high-pressure systems with a range from Class 150 to Class 2500, and accommodates both reduced and full bore options. Constructed from durable materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can also be supplied with NACE-compliant materials on request.

Manufactured in accordance with recognized standards such as ASME B16.34, API 6D, and ISO 17292, the Monoflange DBB provides a compact, robust solution for dual isolation with reliable venting. Its integrated design reduces stress on piping systems, minimizes maintenance needs, and ensures consistent performance in critical oil and gas applications.

View Details

T-CL Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

Electric Submersible Pump ESP Packer – 7" – 3,500 PSI

The 7" ESP Packer is a single-mandrel, dual-bore, hydraulic-set production packer set in place using hydraulic pressure applied through the tubing. The dual-bore configuration includes a pass-through section that allows the electric cable to reach the ESP pump below the packer while maintaining isolation between the tubing and the annulus, enabling reliable deployment and operation of the ESP system for artificial lift in oil and gas wells.

The packer has bi-directional, case-carburized barrel slips that anchor it securely against well pressures from both above and below, preventing movement during operation. It can be retrieved with a straight upward pull on the tubing string and is available in both straight-pull and cut-to-release configurations to suit different well conditions.

The packer has a nominal size of 7" and fits 7" casing weighing 26–32 PPF or 7-5/8" casing weighing 55.3 PPF. The outer diameter is 5.970", and the main bore inner diameter is 2.992". The assembly allows up to five feed-through lines for electric cables or injection lines, and the total length is 125".

The body is made from L80 material with HNBR elastomer seals, rated for pressures up to 3,500 PSI and temperatures from 70°F to 300°F. Connections include a 3-1/2", 9.2 PPF VAM TOP box at the top and a 3-1/2", 9.2 PPF VAM TOP pin at the bottom. The release weight is 68,800 lbs. The packer meets API Validation Grade V3 and Quality Level QL1 standards, providing reliable performance under standard service conditions.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

StimStixx Thru-Tubing 3 1/2

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionizing Well Treatment Efficiency! Are you ready for a game-changing solution in well treatment? Look no further than Thru-Tubing Acid Stimulation by StimStixx Technologies. Our innovative product offers quick and easy deployment via electric wireline, providing you with a seamless experience from start to finish. We offer two powerful options to meet your specific needs: HCL and HCL/HF acid blends. With our specially formulated solid acid stick, delivered through slickline, wireline, coil tubing, or tractor conveyance, we ensure heated acid vapor is precisely directed to the zone of interest, providing pinpoint accuracy. The secret behind our success lies in the highly reactive nature of our heated acid vapor. It penetrates contaminants and carbonate scale with increased efficiency, resulting in enhanced contact with the formation. The vapor quickly vaporizes and becomes fully spent down-hole, thanks to its high reactivity and relatively low volume. This unique feature eliminates the need for post-treatment clean-up or disposal, ensuring a cleaner and safer operation. But the benefits don't stop there. Thru-Tubing Acid Stimulation offers numerous advantages that will transform your well treatment process. Our technology reduces CO2 emissions, helping you contribute to a greener future. With reduced downtime and simple implementation, you can save valuable time and resources. The increased precision of our product guarantees optimal results, while its fast-acting nature ensures efficient operations. Lower manpower, rig, and equipment costs further enhance the cost-effectiveness of our solution. Additionally, you can bid farewell to worries about corrosion and wear on machinery, as our product minimizes these concerns. And with no surface spillage and reduced exposure to hazardous materials, safety becomes a top priority. Join the Thru-Tubing Acid Stimulation revolution today and experience the unparalleled efficiency and effectiveness of StimStixx Technologies. Trust us to elevate your well treatment process to new heights. View Details

G Compression set Retrievable Packer

The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. C-1 Single Grip Invertible Packer The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 20-23 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Fiber Optic Fusion Splicing

Harnessing the Power of Seamless Connectivity in the Oil and Gas Sector with Nulux’s Fiber Optic Fusion Splicing In the intricate and demanding environments of the oil and gas industry, ensuring seamless, reliable, and robust data transmission is paramount. Every segment of the extensive energy value chain, from exploration and extraction to transportation and refinement, hinges upon unfettered communication and data flow. Nulux Network Solutions, steadfast in its commitment to supporting customers towards a more sustainable future, proudly shines a spotlight on one of its sterling services: Fiber Optic Fusion Splicing. Demystifying Fusion Splicing Fusion splicing is not merely a technical process; it’s an art form where two pieces of fiber optic cables are meticulously joined together to craft a permanent bond. It is not merely about connecting two cables; it's about facilitating a continual, unbroken pathway for data, ensuring that your critical information traverses across your networks without hesitation or impedance. The resultant creation is a single, coherent piece of fiber, capable of being utilized in myriad applications, especially where the amalgamation of multiple fibers or cables is necessitated. Given the specialized nature and the precise equipment required to perform fusion splicing, it is indispensable to collaborate with a proficient service provider – a role where Nulux jubilantly finds its calling. Ensuring Unparalleled Data Transmission with Fusion Splicing Embarking upon fusion splicing is not merely opting for a connection; it's choosing the promise of the most reliable, consistent, and high-fidelity data transmission possible. This not only amplifies the effectiveness of your optical network but also significantly bolsters its durability, ensuring that your operations in the oil and gas sectors are perpetually connected and operational. Why Nulux Stands Unparalleled in Fiber Optic Fusion Splicing Our expertise transcends providing products and solutions; it’s a commitment to walk alongside our customers, guiding them on their journey towards not just operational efficiency but towards a future that leans into sustainability. At Nulux, we provide: Expertise Across the Energy Value Chain: From upstream to downstream, our services encapsulate the entirety of the energy value chain, ensuring that every node of your operation is seamlessly connected. Custom Solutions: We delve into understanding the unique operational landscape of your facilities, providing tailored fiber optic solutions that resonate with your specific requirements. Sustainable Future: Aligned with the global pivot towards sustainability, our solutions are crafted not just with an eye on operational efficiency but also with a commitment towards fostering a sustainable future. Infinite Possibilities with Uninterrupted Connectivity Engineering professionals in the oil and gas sector grapple with a multitude of challenges, and data transmission should not be one of them. Fiber Optic Fusion Splicing by Nulux is not merely a service; it's a pledge of uninterrupted connectivity, a guarantee of flawless data transmission, and a commitment to bolstering your operations with unparalleled connectivity solutions. In the realms of the digital evolution of the oil and gas sector, every bit of data is vital, and ensuring it reaches its destination without interruption is critical. Choose Nulux Network Solutions for your Fiber Optic Fusion Splicing, and let’s craft a future where your data flows as seamlessly as your operations. Your network. Our solutions. Nulux’s promise of a connected future. View Details

Tailor Made Gas Solutions

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions. View Details

Hydraulic Set Large Bore Retrievable Production Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Fiber Network Backbone Installation

Illuminating the Pathway to Enhanced Connectivity with Nulux: Pioneering Fiber Network Backbone Installation for the Oil & Gas Sector In the intricate labyrinth of the energy sector, wherein seamless data transmission forms the spinal cord of operational efficacy, establishing a robust, secure, and unfettered network backbone becomes imperative. At Nulux Network Solutions, our objective transcends beyond offering mere solutions; we are your partners in navigating through the convoluted pathways of data connectivity and communication within the oil and gas industry, ensuring that the artery of your operations pulsates with vigor, reliability, and sustainability. Sustaining the Future with Fiber Optics Nulux emerges as a beacon of sustainable advancements, offering an array of products, solutions, and services that cascade across the entirety of the energy value chain. We are steadfast in our commitment to guiding our partners in the oil and gas industry towards a future that not only resonates with sustainability but is also interwoven with technological prowess and innovation. Our Fiber Optic solutions symbolize this commitment, ensuring your journey towards a more sustainable future is always illuminated by the consistent, reliable, and efficient transmission of data. The Nulux Fiber Network Backbone Installation The oil and gas industry, characterized by its voluminous data generation, necessitates a network backbone that can shoulder the hefty demands of data transmission with unbridled efficiency and security. Our Fiber Network Backbone Installation service is not merely a technological provision but an embodiment of our expertise, experience, and dedication to ensuring your operations are always in sync with the digital pulse of the industry. Reliable Data Transmission: An uninterrupted flow of operational data is ensured, empowering your operations with real-time analytics, diagnostics, and vital decision-driving data. Fortified Security: Guarding your data against potential breaches and vulnerabilities with a fiber network that is securely fortified, ensuring a safe and secure environment for your data to traverse. Scalability: Our fiber network infrastructure scales in tandem with your operational expanse, ensuring that as your data demands burgeon, our network is always a step ahead in meeting those requirements with equal efficiency and reliability. A Tapestry of Operational Excellence Our Fiber Network Backbone Installation forms the intricate tapestry that interlaces your operational nodes, ensuring that the voluminous data generated is seamlessly integrated, conveyed, and utilized, forming the substrate upon which vital operational strategies and decisions are cultivated and realized. Safeguarding Your Data, Ensuring Its Journey is Unhindered At Nulux, we ensure that the conduit through which your data traverses is not merely operationally optimized but also securely shielded against potential cyber threats and vulnerabilities, fortifying your operational data against breaches and ensuring it navigates through a secure pathway. Join Hands with Nulux Embark on a journey where your operational data is not merely transmitted but is safeguarded, scrutinized, and utilized to shape a future wherein your operations echo with sustainability, operational excellence, and technological advancement. With our Fiber Network Backbone Installation, steer through the digital realms of the oil and gas industry with Nulux, where every bit of data, every decision, and every operational stride is backed by the stalwart reliability and security of our fiber-optic solutions. In a realm where data propels decisions, ensuring its secure, efficient, and unfettered transmission is paramount. Traverse with Nulux, where your data is not merely communicated but empowers your operations towards a future where every decision is data-driven, every operation is efficient, and your journey towards sustainability is continually illuminated by the steadfast glow of our solutions. Your journey towards an operationally efficient and sustainable future begins with Nulux. Let’s navigate through the digital corridors of the oil and gas industry together, ensuring your data navigates through the most secure, reliable, and efficient pathways, crafting a future where technology and sustainability converge to form a symphony of operational excellence. Let’s craft this future, together, with Nulux. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Stand off Protector

CSA 60 unit, Locking FAST charger rack

Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment. View Details

NE Safety Valve, Surface Controlled 4-1/2 inch

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

2 7/8" SCSSSV – Surface Controlled Subsurface Safety Valve – 5,000 PSI – ISO

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 2 7/8" Surface-Controlled Subsurface Safety Valve (SCSSSV) is designed to shut in a well to prevent uncontrolled flow caused by equipment failure or damage. It is installed in the upper wellbore to provide emergency closure of the production tubing, isolating the wellbore if there is a failure in the surface production control system or downhole equipment.

The valve operates on a fail-safe principle, closing automatically when control pressure is lost. It features a flapper-type mechanism and is surface-controlled through hydraulic pressure. The design is self-equalizing, which helps maintain pressure balance across the valve during shut-in and restart, ensuring consistent performance.

This valve is wireline retrievable, meaning it can be removed or serviced without pulling the entire tubing string, reducing well intervention time. It is compatible with landing nipples having seal bore diameters of 2.125", 2.188", or 2.313", allowing flexibility in well design.

The valve is rated for working pressures up to 5,000 psi and offers internal flow passage options of 0.81" or 1.12". The sealing surfaces are located outside the flow path when the valve is open, minimizing erosion and wear. The flapper is made from solid bar stock to provide mechanical strength and durability.

This configuration is commonly applied in wells where emergency shut-in is necessary and regular maintenance without tubing retrieval is preferred.

View Details

Tube Fittings Male Connector NPT – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 7/8” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Tube Fittings Male Connector NPT are used to connect tubing directly to threaded pipe systems, ensuring a secure and leak-tight joint in fluid and gas applications. The male NPT threads allow compatibility with standard pipe threads.

These fittings are unique due to their twin ferrule design, which provides a strong mechanical grip on the tubing while creating a reliable seal without requiring welding or additional sealants. The precision-machined ferrules deform evenly to prevent leaks, even under vibration, impulse, or high-pressure conditions.

Straight fittings are manufactured from bar stock, and shaped fittings are made from forgings, offering high structural strength. The case-hardened back ferrules and silver-plated female threads reduce wear and prevent galling, while the radius junction in elbows maintains smooth flow.

Installation is simplified: the tubing is inserted fully to the shoulder of the fitting, and the nut is tightened to specific torque, producing a secure connection. Male Connector NPT fittings are ready for immediate use and can be disassembled and retightened if needed.

Their combination of threaded pipe compatibility, twin ferrule sealing, and ease of installation makes them reliable and widely used in demanding industrial applications.

View Details

R-3 Double Grip Retrievable Packer

The R-3™ packer is a versatile production packer intended for a broad range of production applications. It is a compression-set packer, suitable for stimulation and treating applications in a double-grip configuration. Applications in which excessive bottomhole pressures have been depleted, a single-grip version can be used as an economical production packer. The R-3 single-grip retrievable-casing packer is set with one-fourth-turn right-hand rotation and can be released with straight pickup. We can source from current stock or direct from the manufacturer. View Details

Tubing Hanger Coupling - 4 ½” to 2 3/8”

The 4 ½” x 2 3/8” tubing hanger coupling is a specialized downhole component designed to connect two different sizes of upset tubing within a wellhead assembly. Upset tubing refers to tubing that has thicker, reinforced sections at the ends—called “upsets”—which strengthen the threaded connections and help withstand the mechanical stresses and high pressures encountered during well operations. This coupling provides a secure and pressure-tight transition between a larger 4 ½-inch tubing hanger and a smaller 2 3/8-inch production tubing string, enabling effective management of wellbore fluids and maintaining pressure containment.

Engineered to integrate seamlessly with tubing hanger spools, wrap-around tubing hangers (PTHSW), and ‘PTHS’-type tubing spools, this coupling forms part of a modular wellhead completion system. Its union nut design allows installation by screwing the coupling in place without rotating the Christmas tree, simplifying assembly and reducing the risk of damage during installation.

Both the top and bottom ends of the coupling are threaded to customer specifications, offering flexibility for various well configurations and allowing the installation of back pressure valves to maintain well control during operations. Manufactured to API standards and constructed from high-grade materials, the coupling delivers durability and reliable performance in demanding downhole environments characterized by high pressure, temperature, and corrosive fluids.

By facilitating a smooth and strong size transition between different tubing strings, the 4 ½” x 2 3/8” tubing hanger coupling supports well integrity, operational efficiency, and safety throughout oil and gas production.

View Details

OCTG Casing from 4 inch to 36 inch for oil and gas well completions

OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Casing is the pipe placed in the well that is not exposed to flowing fluids from the reservoir to surface. It is cemented in place and provides strength and stability to the drilled borehole. Our international network of manufacturers and warehouses have almost all weights and grades in stock. View Details

Pipe Fittings Reducing Adapters – Female to Male NPT – 1/8", 1/4", 3/8", 1/2", 3/4", 1” – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Reducing adapters Female to Male NPT are used to connect pipes or instrumentation lines of different diameters in oil and gas systems. They allow a larger pipe or fitting to join with a smaller one without leaking, ensuring the flow of liquids or gases remains safe and controlled. These fittings are especially useful in situations where space is limited or existing piping needs to be adapted to new equipment.

They are made from high-quality materials such as stainless steel, brass, or carbon steel, which can handle pressures up to 10,000 PSI. The female NPT side threads internally to receive a male pipe, while the male NPT side threads externally to connect to a female fitting. This combination provides a secure, leak-resistant connection that is durable even under high pressure, vibration, or temperature changes.

Reducing adapters are widely used in oil and gas production, processing, and distribution systems.

They are ideal for connecting instrumentation, control systems, chemical injection lines, or any piping where size changes are required. Their compact design and simple installation make them a practical choice for engineers and technicians who need reliable connections in complex piping networks.

View Details

Tubing Slip Stop

Enhance Well Operations with Precision: Discover HOCA Oil Tools' Slip Stop In the world of oil and gas, where the margin for error is minute and the demand for efficiency and safety is paramount, the right downhole tools can make all the difference. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools designed to meet and exceed industry challenges. Among our esteemed solutions is the Slip Stop, a critical component designed to bolster downhole operations' safety and effectiveness. HOCA's Slip Stop: The Cornerstone of Safe and Efficient Downhole Operations The Slip Stop by HOCA Oil Tools is engineered to provide unmatched reliability and control in various downhole environments. Crafted with precision from high-grade materials, this tool is designed to anchor securely within the wellbore, preventing the unwanted movement of downhole tools and equipment. It is an essential tool for ensuring the safety and success of numerous downhole activities, from well completion to intervention tasks. Experience the Unparalleled Quality of HOCA Oil Tools At HOCA Oil Tools, our commitment to excellence is reflected in every tool we provide, including the Slip Stop. We understand the complexities and challenges of downhole operations, which is why we are dedicated to delivering solutions that not only meet but exceed the expectations of the oil and gas industry. Incorporating the HOCA Slip Stop into your downhole operations is a step toward safer, more efficient, and more cost-effective well management. Our tools are designed with the end-user in mind, ensuring ease of use, reliability, and, most importantly, operational safety. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who rely on our Slip Stop to enhance their operational capabilities. Partner with us, and elevate your downhole operations with tools crafted for excellence and innovation. With HOCA Oil Tools, you're not just investing in a product; you're investing in peace of mind, operational integrity, and the future success of your downhole activities. View Details

Surface-Controlled Safety Valves for 5” Casing Completion

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 5" SCSSSV (Surface-Controlled Subsurface Safety Valve) is used to shut in a well if there\'s a sudden loss of control—such as equipment failure or surface damage. Installed in the upper wellbore, it acts as a critical safety barrier, closing automatically if surface control pressure is lost. This helps protect people, equipment, and the reservoir from uncontrolled flow.

This valve is designed for 5" (127 mm) tubing and fits a 4.125" landing nipple. It’s rated for working pressures up to 5,000 psi and has a 2.38" internal bore, making it well-suited for high-rate production wells. The valve includes a self-equalizing feature that helps reduce pressure differences across the flapper during reopening, supporting smoother restarts and lowering mechanical stress.

Because it’s wireline-retrievable, the internal components can be serviced or replaced without pulling the tubing—saving time and reducing intervention costs. The flapper is machined from solid bar stock for durability, and the sealing surfaces are positioned out of the flow path when open, helping extend the life of the valve by reducing wear.

This size is typically chosen when both high flow capacity and reliable emergency shut-in protection are required.

View Details

Ball Valve Panel Mounted – 2-Way Male x Female End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

This 2-way panel-mounted ball valve with male x female connections is designed to control, start, or stop fluid flow in oil and gas piping systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or process bypasses.

The male x female connections allow secure inline installation and easy integration into existing piping without requiring additional fittings. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves need centralized access or where physical access to the pipeline is limited.

The valve features a floating ball design for leak-proof shut-off under high-pressure conditions. Operation is simple with a quarter-turn handle that provides fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Factory testing ensures seat and stem integrity, and the valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments.

View Details

Re-perforating

Revitalizing Wells with Precision: InWaTec Combined’s E-line Re-perforating Services In the lifecycle of an oil or gas well, the need to enhance production or manage reservoir depletion often leads to re-perforating—a strategic intervention aimed at revitalizing well performance. InWaTec Combined's E-line Re-perforating Services leverage the proven efficacy of wireline technology to refine and optimize this crucial process. Wireline, or electric line, has been the traditional mode for deploying perforating guns due to its substantial benefits. The real-time depth control ensures that each perforation is placed with surgical precision, while the selectivity afforded by wireline allows for targeted interventions, focusing on zones with the greatest potential for increased production. Moreover, the reduced logistics of wireline operations, as opposed to tubing deployment, offer a streamlined, cost-effective approach to well servicing. Historically, wireline perforating guns were differentiated based on their use—either as casing guns for pre-completion perforation or through-tubing guns for post-completion jobs. In today's industry, however, this distinction has been transcended. InWaTec Combined has embraced the versatility of wireline to deliver any engineered perforating system, regardless of the well's stage of life, alongside an extensive array of explosive devices. Our E-line Re-perforating Services are not merely about revisiting existing perforations. They represent a strategic re-evaluation and reconfiguration of the well's production strategy. Whether it's addressing areas of the reservoir that were initially bypassed, bypassing damaged perforations, or creating new pathways in depleted zones, our re-perforating services are tailored to meet the unique demands of each well. At InWaTec Combined, we understand that re-perforating is an opportunity to enhance well productivity significantly. Our expert teams, equipped with advanced diagnostic tools, evaluate the well's current status to identify the most promising zones for re-perforation. With this data, we employ the latest in shaped-charge technology and explosive devices, ensuring that new perforations deliver the maximum flow and recovery possible. Choosing InWaTec Combined's E-line Re-perforating Services means entrusting your well's performance to a company that values precision, efficiency, and innovation. Our commitment to excellence ensures that your re-perforating interventions are executed with the highest level of expertise, from planning to execution. Partner with us to revitalize your wells. With InWaTec Combined's E-line Re-perforating Services, you can expect to turn potential into production, optimizing your well's output and extending its productive life. Let us help you unlock the hidden value in your wells, one precise perforation at a time. View Details

Monoflange DBB Double Block & Bleed Valve – Flange x Thread – Needle Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange DBB Double Block and Bleed Valve with Needle-Needle-Needle configuration is designed to provide dual isolation and safe venting in oil and gas, chemical, and process systems. Both isolation points use needle valves, allowing precise control of flow and pressure in the cavity between the two isolation points, which minimizes leakage and ensures accurate venting. This configuration is particularly suited for instrument and gauge isolation, chemical injection, and sampling applications, where fine control and safety are critical.

The monoflange design integrates the two isolation valves and the bleed into a single compact body. This eliminates the need to bolt together separate valves, reducing the number of joints, potential leak paths, and overall weight, while saving installation space and simplifying maintenance. The valve can accommodate flange sizes from 1/2” to 2” and is rated for Class 150 to Class 2500, making it suitable for a wide range of high-pressure applications.

Manufactured to recognized industry standards including ASME B16.34, API 6D, and ISO 17292, the valve is available in a variety of materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional NACE MR-0-175 compliant materials are available for corrosive environments. In-built vent valves and low emission testing ensure the valve meets stringent safety and environmental requirements, providing a reliable solution for critical fluid control applications.

View Details

BMS Liquid Stopper

BMS Liquid Stopper: The Innovative Solution for Safe and Eco-Friendly Workover Activities If you're looking for a reliable and eco-friendly solution for your workover activities, look no further than Clearstream's BMS Liquid Stopper. Our innovative product acts as a semi-solid plug that allows workover activities without impairing the formation, all while being completely biodegradable. Traditionally, workover activities involve the use of cement or other materials to create a plug in the wellbore. However, these materials can be harmful to the formation. BMS Liquid Stopper solves this problem by providing a safe and eco-friendly alternative. Our product is specially designed to create a semi-solid plug that can be easily removed once the workover activities are complete. This allows for a more efficient and effective workover process, without harming the environment or impairing the formation. In addition to its effectiveness and eco-friendliness, BMS Liquid Stopper is also biodegradable. This means that it breaks down naturally over time, without leaving any harmful residue in the environment. This makes it the perfect solution for companies that are committed to environmental sustainability. At Cleanstream, we take great pride in our commitment to quality, safety, and environmental responsibility. Our liquid stopper is rigorously tested to ensure that it meets the highest standards of quality and effectiveness. And with its biodegradable properties, you can rest assured that you are using a product that is safe for both your business and the environment. Don't settle for traditional materials that can harm the environment and impair the formation. Choose BMS Liquid Stopper for safe, efficient, and eco-friendly workover activities. Contact us today to learn more about how our innovative product can benefit your business. View Details

Gas Check Valve for LM2500 Gas Turbine

The Gas Check Valve is a unidirectional valve used in LM2500 gas turbine systems to prevent the reverse flow of combustion gases into critical fuel and oil lines. Its primary function is to maintain the correct flow direction, ensuring that gases only travel toward the combustion chamber and not back into upstream components, where reverse flow could cause damage, safety risks, or system inefficiencies.

This check valve is engineered to operate under the high-pressure and high-temperature conditions typical of industrial gas turbine environments. It serves as a passive safety component, requiring no external power to function, and contributes to the overall reliability and integrity of the turbine system.

Commonly found in aero-derivative gas turbines used in oil and gas applications, the check valve is essential for maintaining proper system performance. Its inclusion in the turbine’s gas path helps ensure safe operation by minimizing the risk of combustion gas contamination in auxiliary systems.

View Details