Ballycatter.ca - Industrial Equipment

Elevating Well Integrity Analysis with InWaTec Combined's CBL-VDL Services Ensuring a solid cement bond between casing and the wellbore is not just a procedural step; it's a critical factor in well integrity that demands the most meticulous evaluation techniques. InWaTec Combined’s Cement Bond Logging (CBL) and Variable Density Logging (VDL) Services offer a refined approach to acoustic well logging, a method that has been a research focal point due to its importance in ascertaining well safety and functionality. Cement bonding evaluation can be segmented into two categories based on tool source frequency: the sonic method (around 20 kHz) and the ultrasonic method (several hundred thousand Hz). The sonic method, a technique that has stood the test of time since its introduction in 1963, provides a qualitative or semi-quantitative analysis of the cement bond. It involves the excitation of a sonic wave and measurement of its attenuation along the borehole axis, with the degree of attenuation reflecting the quality of shear coupling behind the casing. Simply put, the greater the attenuation, the better the bond. CBL specifically focuses on the attenuation factor derived from the first arrival amplitude, offering a snapshot of the bond's integrity. In contrast, VDL takes into account the full waveform amplitude, providing a more detailed and denser representation of the bond quality. These dual measurements, with industry-standard receiver spacings of 3-ft for the casing wave and 5-ft for the full wave, allow for a comprehensive analysis of the cement bond. InWaTec Combined's CBL-VDL Services employ these methodologies with precision-engineered tools that capture high-resolution data, enabling our experts to discern even subtle variations in bonding conditions. This data is not merely numbers on a log; it's a story of the well's integrity, revealing areas of potential concern that can be proactively addressed to prevent non-productive time and ensure operational safety. By leveraging the combined strengths of CBL and VDL, InWaTec Combined provides clients with a robust assessment of their cementation quality. The detailed logs produced not only satisfy regulatory requirements but empower operators with actionable insights to optimize their well construction and maintenance strategies. Choose InWaTec Combined's CBL-VDL Services for your cement bond evaluation needs and gain peace of mind with our thorough, reliable, and cutting-edge acoustic logging solutions. Our commitment to excellence in well logging means that when it comes to well integrity, you're not just meeting industry standards—you're setting them. View Details

WI Subsurface Safety Valve 2.72 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Geothermal

Revolutionizing Geothermal Well Interventions: InWaTec Combined's Mini-Coil Services In the dynamic world of geothermal energy production, where the efficient management of well interventions is paramount, InWaTec Combined is pioneering with our Mini-Coil Services. Designed to navigate the unique challenges of geothermal wells, our Mini-Coil Tubing offers a versatile and high-pressure tolerant solution for fluid placements and well stimulation. Geothermal wells demand a delicate balance between precision and strength. Our Mini-Coiled Tubing services are tailored to meet these needs, providing an ideal solution for the small quantity placements of fluids that are often required in geothermal operations. Whether it's for precision acidizing, scale removal, or other chemical treatments, the Mini-Coil is an invaluable tool. Compact Power: Our Mini-Coiled Tubing is compact yet robust, designed to handle the high pumping pressures needed for effective interventions in geothermal wells. Its smaller diameter does not compromise its ability to withstand intense conditions underground. Efficiency in Production: Lifting wells into production efficiently is crucial for maintaining the economic viability of geothermal operations. The Mini-Coil facilitates this by enabling operators to deliver targeted treatments and interventions that can revitalize well performance. Tailored to Geothermal Needs: While traditional coiled tubing operations may be limited by flow and snubbing capabilities, our Mini-Coil Tubing is engineered to overcome these constraints, providing enhanced pressure handling that is especially beneficial in the high-temperature, high-pressure environments characteristic of geothermal wells. It's true that Mini-Coil Tubing has its limitations regarding flow and snub, but what it offers in return is the capacity to handle significantly higher pumping pressures. This attribute is particularly advantageous in geothermal applications where the subsurface conditions can be extreme. InWaTec Combined's commitment to innovation is further demonstrated by the integration of advanced monitoring technologies that accompany our Mini-Coil Services. Real-time data acquisition allows for precise control and assessment of the intervention process, ensuring that operations are not only successful but also conducted with an emphasis on safety and sustainability. In the realm of geothermal energy, where the right interventions can drastically enhance the output and longevity of wells, InWaTec Combined's Mini-Coil Services emerge as a clear choice for operators seeking to optimize their wells. Our services are a testament to our dedication to providing solutions that are both efficient and effective, reducing downtime and maximizing production. Partner with InWaTec Combined for your geothermal well needs and experience the next level of well intervention services. Let our Mini-Coil Tubing unlock the full potential of your geothermal operations, where precision meets power, and innovation drives production. View Details

Gas Turbine LM2500+ DLE 50Hz SC

The LM2500+ DLE gas turbine is a high-performance solution for power generation in industrial, onshore, and offshore environments where emissions control and water availability are key concerns. Delivering over 30 megawatts of power and up to 40% thermal efficiency in simple cycle operation, it offers reliable performance with low environmental impact.

At the core of its design is the advanced Dry Low Emissions (DLE) combustion system, which reduces NOx and unburned hydrocarbon emissions without the need for water or steam injection. The system achieves this by precisely managing combustion conditions and lowering flame temperature. A triple annular combustor configuration enables fuel to burn more evenly at lower temperatures across a larger area, while new electrically actuated fuel metering valves enhance control and reduce complexity compared to older electro-hydraulic systems.

The LM2500+ DLE also features a 17-stage axial compressor for increased airflow and output, along with a modular, open design that enables faster maintenance and engine replacement. Its fast start capability makes it suitable for operations requiring multiple starts and stops per day.

Whether powering industrial facilities, pipeline networks, or combined heat and power (CHP) systems, the LM2500+ DLE offers a dependable and efficient gas turbine solution that balances operational flexibility with emissions performance.

View Details

HP-3 Hydraulic Set High Angle 5 1/2" 14-20 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Hydraulic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Flare Gas Capture

Unlock Value from Flare Gas with Lovat Gas Solutions Flare gas, often associated with oil production, holds tremendous potential for conservation and revenue generation. At Lovat Gas Solutions, we specialize in flare gas capture and can help your company devise a comprehensive plan to conserve this valuable resource and turn it into a source of revenue. In many jurisdictions, energy regulators require producers to conserve associated gas to enable oil production. If your company has oil wells or fields that are shut in due to excess gas production, we are here to assist you. Our team of experts will work closely with you to develop a conservation and revenue plan that aligns with your company's objectives. Why choose Lovat Gas Solutions for your flare gas capture needs? 1. Expertise in Flare Gas Capture: Our team possesses deep expertise and knowledge in flare gas capture. We understand the unique challenges associated with capturing and monetizing this resource. With our experience and technical know-how, we can help you devise an effective plan to conserve flare gas and unlock its value. 2. Compliance with Energy Regulations: We stay up-to-date with the latest regulations and requirements set forth by energy regulators. Our solutions are designed to help you meet regulatory obligations while optimizing the use of flare gas to enhance your operations and revenue streams. 3. Conservation and Revenue Generation: Lovat Gas Solutions is dedicated to helping you turn flare gas into a valuable asset. By capturing and conserving flare gas, we can develop a plan that not only helps you meet regulatory standards but also generates revenue for your company. 4. Tailored Solutions: We recognize that every oil well or field is unique, and so are the requirements for flare gas capture. Our team will work closely with you to understand your specific circumstances and develop a customized plan that maximizes the potential of your flare gas while aligning with your business goals. By partnering with Lovat Gas Solutions, you can: • Conserve valuable resources by capturing flare gas • Comply with energy regulations and demonstrate environmental responsibility • Generate additional revenue streams from previously wasted gas • Enhance the sustainability and profitability of your operations Contact us today to discuss your flare gas capture needs. Our team of experts is ready to collaborate with you to devise a conservation and revenue plan that suits your company's requirements. With Lovat Gas Solutions as your trusted partner, you can unlock the full potential of flare gas and maximize the value of your operations. View Details

Tubing Inspection

Ensuring Production Integrity with InWaTec Combined's E-Line Tubing Inspection Services In the lifecycle of oil and gas wells, tubing integrity is fundamental to ensuring consistent production and operational safety. At InWaTec Combined, we offer specialized E-Line Tubing Inspection Services to preemptively identify and mitigate risks associated with tubing failure, utilizing state-of-the-art diagnostic techniques to safeguard your assets. Tubing failures, which can stem from deformation, physical wear, or corrosion, pose a significant threat to well integrity and production. Our advanced inspection services are designed to detect these issues early, enabling timely interventions that maintain continuous well performance. Our comprehensive suite of E-Line Tubing Inspection Services includes: Cased-Hole Calipers: These tools provide precise measurements of the internal diameter of tubing, detecting anomalies and changes that could indicate deformation or wear. Flux-Leakage Tools: Specialized for identifying defects in ferrous tubulars, these tools locate areas of metal loss or corrosion by detecting disruptions in magnetic flux. Electromagnetic Phase-Shift Tools: By measuring the changes in electromagnetic fields, these tools can effectively pinpoint areas of wall thickness changes due to corrosion or wear. Ultrasonic Tools: Employing high-frequency sound waves, these tools are adept at measuring tubing wall thickness, identifying areas at risk of thinning, which could lead to potential collapse. In addition to these, our E-Line Tubing Inspection Services also employ ultrasonic radial-cement-evaluation and modified openhole-imaging devices, which are particularly effective in assessing the condition of the tubing for signs of internal or external metal loss—a crucial step in preventing unexpected well shut-ins. At InWaTec Combined, we understand that the stakes are high when it comes to maintaining well integrity. Our E-Line Tubing Inspection Services are not just about identifying problems; they're about delivering peace of mind. By utilizing our advanced diagnostic tools, operators can rest assured that the integrity of their production tubing is being monitored with the utmost precision, allowing them to focus on maximizing output and efficiency. Choosing InWaTec Combined means partnering with a company that places a premium on innovation, safety, and reliability. Our commitment to excellence ensures that your operations benefit from the latest in inspection technology, delivered by a team of seasoned professionals. Trust us to provide the insights you need to keep your wells flowing safely and smoothly, today and into the future. View Details

NORM Decontamination Services

As the oil, gas, and geothermal industries continue to grow, the risk of contamination from Naturally Occurring Radioactive Material (NORM) also increases. That's why Cleanstream is proud to introduce our innovative, qualitative, and rapid cleaning services for Low Specific Activity (LSA) and NORM contamination. Our advanced cleaning methods comply with LSA/NORM regulations, ensuring safety for people and the environment. We invest heavily in new methods to continuously guarantee quality. Our own radiation experts, at Radiation Protection Expert (RPE) and Radiation Protection Officer (RPO) level, always carry out the decontamination and final release. At Cleanstream, we understand the importance of cleaning without damage. That's why we've developed our own inventive cleaning methods to prevent materials from getting damaged during the cleaning process. Our experienced employees have extensive knowledge of decontamination and are involved in disassembling and decontaminating contaminated materials originating from oil and gas wells so that the metal can be recycled. Our services are both rapid and cost-effective. Because all work activities are carried out by our own staff at our 20,000 m2 premises in Ter Apel, the communication lines and turnaround times are short, resulting in considerable cost-savings for our clients. Cleanstream is licensed to clean all types of NORM/LSA contaminated materials. Cleaned objects are released by means of a certificate, showing that your material has been cleaned in accordance with laws and regulations. At Cleanstream, we are committed to embracing change and constantly improving to meet the demand. Join us in our mission to promote safety, quality, and green solutions. Contact us today to experience our innovative and efficient cleaning services for NORM/LSA contaminated materials. View Details

Rotary Blasthole Drill

Precision Performance to Drive Costs Down and Profitability Up The Cat® MD6310 drill rig is a powerful, flexible tool that can help you get the most out of your drilling operation. It offers a wide variety of features and options designed to meet your site’s specific needs and challenges, with an updated cab that keeps operators safe and comfortable while increasing performance and productivity. Infused with the latest technologies, the MD6310 not only increases productivity and allows for automated drilling, but also improves the efficiency of all downstream operations. Designed to drill holes from 203-279 mm (8-11 in) in diameter, the MD6310 is is optimized for single-pass or multi-pass drilling in both rotary and down-the-hole drilling modes. View Details

Dump Bailer

Revolutionize Cementing and Acidizing Operations with HOCA Oil Tools' Dump Bailers In the dynamic and challenging environment of downhole operations, the need for precise, efficient, and reliable tools has never been greater. HOCA Oil Tools, a pioneer in downhole slick line technology, is at the forefront of this demand with its state-of-the-art Dump Bailers. Specifically designed for targeted applications such as cementing and acidizing, these tools play a pivotal role in enhancing well integrity and performance. HOCA Dump Bailers: Precision in Every Drop Our Dump Bailers are engineered to deliver materials like cement, acids, or other substances directly to the required downhole location with utmost precision. Constructed from durable materials resistant to harsh chemicals and high pressures, HOCA's Dump Bailers ensure that even the most demanding downhole conditions can be tackled with confidence and control. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities and demands of modern oil and gas extraction. Our Dump Bailers are designed with this understanding at their core, providing innovative solutions that address the specific needs of downhole operations. By integrating our tools into your operations, you gain access to a level of precision, efficiency, and reliability that sets new industry standards. Invest in HOCA's Dump Bailers to leverage their benefits in your downhole operations. Whether you are executing precise cement plugs, combating downhole leaks, or enhancing production through acidization, our tools provide the solutions you need to achieve optimal results. Discover the difference that HOCA Oil Tools can make in your downhole operations. With our commitment to quality, innovation, and customer service, we provide not just tools, but comprehensive downhole solutions that drive your success. Join the ranks of satisfied clients who have experienced the transformative impact of HOCA’s Dump Bailers in their operations. Choose HOCA Oil Tools for unparalleled downhole solutions that elevate your operational efficiency, safety, and success. View Details

Needle Valves Angle Pattern Series – Male x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Angle Pattern Needle Valves Male x Female are designed to control the flow of liquids or gases in a piping system. The angle pattern allows the flow to change direction by 90 degrees, reducing piping complexity and minimizing pressure drop.

The male x female configuration enables easy connection to different pipe types and sizes, providing flexibility for installation in various system layouts. These valves are suitable for high-pressure applications, ensuring reliable and leak-free operation.

In oil and gas operations, they are used for controlling flow to instruments, transmitters, or equipment where space is limited and accurate flow control is needed. Metal-to-metal seals and durable stems ensure long-term performance under demanding conditions.

View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

Safety Valve for Water Injectors 5.71 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Gauge Cutter Runs

InWaTec Combined: Clearing the Path to Performance with Gauge Cutter Services In the intricate arena of subsurface control, the clarity of the pathway is paramount. At InWaTec Combined, we specialize in pre-emptive solutions that pave the way for unimpeded operations. Our Gauge Cutter running services are a critical component of this approach, ensuring that your tubing is verified for freedom from obstruction, thus setting the stage for smooth running or pulling of subsurface controls. The Imperative for a Clear Tubing A gauge cutter is an essential tool in the well servicing toolkit. Its primary role is to confirm that the tubing through which subsurface controls will be run is clear of any blockages. InWaTec Combined’s gauge cutter services provide operators with the assurance they need before commencing critical operations. This step is not just precautionary; it is a strategic move to avoid non-productive time and to ensure that all subsequent interventions are conducted efficiently and effectively. The Gauge Cutter Advantage The design of our gauge cutters is a product of extensive research and practical field experience. The bottom shape of our tools is meticulously crafted to scratch, jar, and cut away common wellbore obstructions like paraffin, sand, or other deposits from the tubing wall. This cleaning action may necessitate several runs with gauge cutters of varying sizes, a process InWaTec Combined is well-equipped to manage. Versatile Applications for Comprehensive Assurance Our gauge cutter services are versatile and comprehensive. Often used to tag the top of landing nipples, Sliding Sleeve Doors (SSDs), or to ascertain the total well depth, our tools provide operators with a multi-faceted solution. Whether it’s for routine maintenance or critical well interventions, running a gauge cutter is a step that can save time and resources in the long run. Customized to Well Specifications Understanding that each well has its unique challenges, InWaTec Combined offers gauge cutters in various sizes and configurations. This customization allows for tailored applications, ensuring that whether the obstruction is due to paraffin buildup or sand deposition, we have the right tool for the job. Commitment to Operational Continuity Choosing InWaTec Combined for your gauge cutter services means selecting a partner dedicated to your operational continuity. Our tools and techniques are designed to facilitate a clear and smooth path for your subsurface controls, minimizing the risks of unexpected interruptions and maximizing your operation's productivity. A Clear Path Forward In summary, InWaTec Combined’s Gauge Cutter running services are an indispensable part of ensuring a successful and uninterrupted operation. By removing potential obstructions and verifying well integrity, we help you maintain operational efficiency. Trust InWaTec Combined to clear the path for your well’s performance, ensuring that every operation from the surface to the subsurface is conducted with confidence and precision. View Details

B-KWIK Control Line and Cable Protector

5" Mech-2 Double Grip Mechanical Set Packer for 15-18 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

API-611 Steam Turbine

Elevate Your Operations with Kessels API-611 Compliant Steam Turbine: Where Precision Meets Excellence In the demanding realm of the oil and gas industry, precision, reliability, and adherence to standards are paramount. Kessels Steam Turbines takes pride in being a premier supplier of Steam Turbines that not only comply with but exceed the rigorous API-611 standards for general-purpose steam turbines. Setting New Standards in Steam Turbine Excellence Kessels Steam Turbines are at the forefront of driving pumps, fans, and compressors in Oil Refineries across the Middle East, India, and South East Asia. These turbines stand as testaments to our unwavering commitment to adhering to stringent design engineering practices set by oil giants and discerning end customers alike. Distinguishing Features of Kessels API-611 Single Stage Steam Turbines: Meets & Exceeds API-611 Standard: Our turbines not only meet but go beyond the API-611 standard, ensuring top-notch performance and reliability. Direct Drive Oil Relay Governors: Equipped with provisions for Direct Drive Oil relay constant speed governors conforming to NEMA class 'A' & NEMA class 'D'. Over Speed Mechanical Trip: Safety is paramount, and our turbines come with an over-speed mechanical trip with safety shut-off as standard. Versatile Gland Sealing: Gland sealing is achieved through carbon rings (up to six, removable), labyrinths, or mechanical steam seals. We offer the flexibility of choosing any combination of these three options. Impulse-Type Wheels: Provision for Single disc single-row, and Single disc two-row Curtis impulse-type wheels made of forged steel. Built-in Steam Strainer: As a standard feature, our turbines include a built-in steam strainer that is removable for your convenience. Versatile Support: Our turbines can be centerline or foot-mounted, offering flexibility in installation. Solenoid Trips: Provision for solenoid trips for remote shutdowns comes as standard, ensuring safety and control. Suitable for High Pressures: Built to handle high inlet and exhaust steam pressures, our turbines are robust and reliable. Horizontal and Vertical Orientation: Choose between horizontal and vertical shaft orientation to suit your specific needs. These features are a testament to our unwavering commitment to ensuring that customers can operate Kessels API-611 compliant Steam Turbines with complete peace of mind for their mechanical driving needs. Choose Kessels for Unparalleled Excellence Choosing Kessels Steam Turbines is a choice for excellence, precision, and reliability. Our API-611 Compliant Steam Turbines not only meet industry standards but surpass them, ensuring the highest levels of performance and safety for your operations. Empower Your Operations with Kessels In the competitive landscape of the oil and gas industry, precision and reliability are non-negotiable. Elevate your operations with the Kessels API-611 Compliant Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Check Valve Poppet Type – Tube Ends 3/8" NPT – 6000 PSI – ISO 9001

The Check Valve Poppet Type with 3/8" NPT tube ends is a compact valve designed to allow flow in one direction while preventing reverse flow in hydraulic, pneumatic, and industrial systems. It features a spring-loaded poppet mechanism that opens when forward pressure exceeds the cracking pressure and closes immediately when flow attempts to reverse, ensuring reliable protection for pumps, compressors, and other critical equipment.

Rated for a standard working pressure of 6,000 psi, with optional higher-pressure ratings up to 10,000 psi, this valve is suitable for demanding applications in oil and gas, chemical processing, instrumentation, and general industrial environments. The 3/8" NPT tube ends provide secure, leak-tight connections and easy integration into medium-diameter piping or tubing systems.

The poppet design minimizes pressure drop while delivering fast response and tight sealing, reducing the risk of backflow and system inefficiency. Built from durable materials such as stainless steel, Duplex, Super Duplex, Hastelloy, Inconel, or Monel, the valve offers long service life even in corrosive or high-pressure conditions. Factory testing ensures each valve meets standards for cracking and reseal performance, with heat code traceability for full material verification.

This type of valve is particularly effective in applications requiring precise flow control, compact installation, and reliable one-way operation, making it an essential component for maintaining system integrity and protecting valuable equipment.

View Details

ROV Communications Systems

Stay Connected with Poseidon Robotics' Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. At Poseidon Robotics, we understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration At Poseidon Robotics, we pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation, Poseidon Robotics is your trusted partner in the subsea robotics industry. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with Poseidon Robotics' advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. Stay connected, stay successful with Poseidon Robotics! View Details

Ball Valve Lever Operated – 3-Way Female x Female Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Female × Female Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows flow to be directed between multiple pipelines, making it ideal for applications such as flow diversion, sampling lines, injection systems, or process line bypasses.

The valve supports split flow and is suitable for pressures up to 6000 PSI (maximum 10000 PSI on request) and temperatures from –40 °F to 450 °F (–40 °C to 232 °C).

The female × female connections enable secure inline installation without the need for male fittings, simplifying assembly and reducing potential leak points. The valve features a floating ball design for seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions.

It is manufactured and tested to ASME B16.34 standards, pressure-temperature rated to ASME B31.3, and type-tested to MSS-SP-99, providing verified performance and reliability in industrial environments.

Operation is efficient and reliable with a quarter-turn lever, allowing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, while replaceable seats and packings extend service life. Fire-safe designs and optional compliance with NACE MR0175 standards are available, and heat code traceability ensures material verification.

Built for demanding industrial environments, the valve is suitable for a wide range of oil and gas applications where flow control, diversion, and durability are critical.

View Details

Mud pump for circulating and drilling in extreme conditions

The Bomco Triplex Mud Pump has a herringbone design and is interchangeable with the Continental Emsco FB model. Mud pumps serve as the heart of the mud circulating system. Reciprocating piston pumps (also called slush pumps or power pumps) are widely used for drilling oil and gas wells. The advantages of the reciprocating positive-displacement pump include the ability to move high-solids-content fluids laden with abrasives, the ability to pump large particles, ease of operation and maintenance, reliability, and the ability to operate over a wide range of pressures and flow rates by changing the diameters of the compression cylinders (pump liners) and pistons. A pump that has single-action strokes in three cylinders is called a triplex pump. View Details

Oil Absorbent Net-Bag Pillows with Handle

Oil Absorbent Net Bags represent a paradigm shift in spill cleanup technology. The unique composition, impressive absorption capacity, and Canadian origin position them as a cutting-edge solution for large spills. As industries continue to prioritize efficiency, cost-effectiveness, and environmental responsibility, Oil Absorbent Net Bags stand at the forefront of progressive spill cleanup methodologies. Oil absorbent Net Bags contain polypropylene strips in a nylon mesh bag. and absorbs up to 10L (2,64 gal) of oil for each bag and repels water. Introduction: Large spills, particularly those involving oil, demand a tailored approach to cleanup. The conventional methods often fall short, necessitating the introduction of specialized tools. Oil Absorbent Net Bags have emerged as a promising solution, offering a combination of advanced materials, superior absorption capabilities, and efficiency in maintenance and disposal processes. Look at the technical design optimizes both absorption capacity and structural integrity because strips of polypropylene, a highly effective oil-absorbing material, are encapsulated within a durable nylon mesh bag. Also, the bag has a high absorption capacity, it stands out to absorb up to 10 liters (2.64 gallons) of oil. This impressive capacity positions it as a reliable and efficient tool for large spill cleanups, minimizing the need for frequent replacements and optimizing resource utilization. A distinctive trait of these net bags is their ability to repel water while selectively absorbing oil. Oil Absorbent Net Bags have proven to be several times more absorbent than traditional methods. The specialized composition enables to outperform alternatives, ensuring a faster and more thorough cleanup process. This not only streamlines the cleanup operation but also translates into lower maintenance costs. The Canadian origin aligns with a culture of environmental responsibility. By choosing Oil Absorbent Net Bags, users contribute to sustainable practices, supporting a product with a minimal ecological footprint. And we ensure that this product meets and exceeds expectations of a good cleanup. Good for the environment and good for you. View Details

9 5/8" HP-5 Hydraulic Set Production Packer

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Bottomhole Pressure Instrument Hangers Accessories

Optimize Downhole Operations with HOCA Oil Tools' BHP Tool Accessories In the ever-evolving oil and gas industry, precision, reliability, and efficiency are paramount. At HOCA Oil Tools, we understand the critical nature of accurate downhole data collection and the tools required to achieve this. Our BHP (Bottom Hole Pressure) Tool Accessories are designed to complement and enhance the performance of downhole pressure measurement tools, ensuring that operators can obtain the most accurate and reliable data possible. HOCA’s BHP Tool Accessories: Enhancing Downhole Data Collection Our BHP Tool Accessories range from specialized adaptors and seals to shock absorbers and carriers, all engineered to ensure that your downhole pressure measurement tools operate at peak efficiency. These accessories are crucial for protecting sensitive instruments, ensuring proper tool placement, and enhancing data transmission from the downhole environment to the surface. Manufactured with the highest quality materials and designed to meet rigorous industry standards, HOCA’s BHP Tool Accessories are the solution to optimizing your downhole operations. Experience the HOCA Oil Tools Advantage Choosing HOCA Oil Tools’ BHP Tool Accessories means opting for quality, reliability, and performance. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether you’re measuring downhole pressures, temperatures, or other critical parameters, our accessories provide the support needed to ensure successful data collection. Integrating our BHP Tool Accessories into your downhole toolkit signifies a step toward enhanced operational success and efficiency. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole challenges with innovative solutions and expert service. Select HOCA Oil Tools for your BHP Tool Accessories and transform the efficiency and accuracy of your downhole operations. Partner with us, and unlock the full potential of your downhole data collection with tools and accessories designed for success. With HOCA Oil Tools, you’re not just investing in products; you’re investing in the future of your downhole operations. View Details

Stand off Protector

BL300 Heavy Inspection Class ROV

Exploring the Depths with Unmatched Precision: Introducing the BL300 Heavy Inspection Class ROV At Poseidon Robotics, we pride ourselves on pushing the boundaries of subsea exploration technology, and our latest creation, the BL300 Heavy Inspection Class ROV, exemplifies this commitment to excellence. Designed to tackle large payloads and challenging dives, the BL300 combines cutting-edge features with a professional Aluminum frame, delivering unparalleled performance in its class. A Collaboration of Innovation: The Birth of BL300 Developed in close collaboration with BLUELINK, LLC, the BL300 ROV emerged as a result of identifying and addressing the market's evolving needs. Launched in March 2019, this exceptional remotely operated vehicle has since redefined the heavy inspection class, becoming the preferred choice for professionals in the subsea industry. The Perfect Blend of Power and Precision The BL300 boasts a unique vectored thruster layout, strategically designed to provide optimum control and stability during underwater operations. Its professional Aluminum frame ensures durability and reliability, making it the ideal choice for challenging dives that demand exceptional performance. Moreover, by utilizing off-the-shelf components, we have achieved an unparalleled price/performance ratio, providing unbeatable value to our customers. Advanced Topside Integrated Console: A Complete Solution in One Package With the BL300 Heavy Inspection Class ROV, we've taken convenience to the next level. The Topside Integrated Console houses a 22-inch sunlight-readable monitor and a hand controller, eliminating the need for additional equipment. The ROV flight computer supports a fully stabilized mode, enabling six-axis stability for precise maneuvering and control. Unrivaled Payload Capacity and Thruster Configuration The BL300 redefines what's possible in a heavy inspection class ROV by offering exceptional payload space and capacity. With a depth rating of 400 meters, this powerhouse can handle the most demanding subsea missions. The smaller diameter vertical thrusters are stacked to optimize the payload area, making it the perfect solution for accommodating large payloads while maintaining stability. The BL300 at a Glance: Specifications • Depth rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in air: 32.1kg • Payload capacity (fresh water): 9.8kg • Payload area: 610mm x 457mm • Thruster: 8 lateral (45deg), 6 vertical • Ballard Pull: 20kg lateral, 24kg vertical • Top speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux video: NTSC/PAL input • Lights: 10x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux power: 5/12/24VDC regulated The Topside Integrated Console: Specifications • Output voltage: 400VDC, 3kW • Input voltage: 240VAC, 20A maximum • Monitor: 22in HD sunlight readable • Case: wheeled, 610x420x260mm, 24kg • Fully isolated output with LIM • Intel PC with Windows 10 installed • Aux HDMI monitor output The Unbreakable Tether To ensure a secure connection and reliable communication between the BL300 ROV and the topside console, our tether is designed with utmost strength and durability. With a breaking strength of 500kg and a 15mm diameter, this robust tether can handle the most demanding subsea conditions, ensuring seamless transmission of data and video. Experience the Poseidon Robotics Difference As pioneers in the subsea robotics and ROV industry, Poseidon Robotics has continuously driven innovation and excellence, and the BL300 Heavy Inspection Class ROV is the epitome of our dedication. Explore new depths with confidence, efficiency, and precision, and join the ranks of professionals worldwide who rely on Poseidon Robotics for unmatched performance. Unleash the Power of BL300 Today Discover a new era of subsea exploration with the BL300 Heavy Inspection Class ROV by Poseidon Robotics. Contact us now to explore the possibilities and equip yourself with the most advanced ROV technology available. Together, we will embark on a journey of discovery, uncovering the secrets that lie beneath the waves. View Details

Shear Down Pulling Tools for External Fishing Necks

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success. View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Environmentally Friendly Chemicals

At Cleanstream, we understand the importance of using safe, green and environmentally friendly chemicals for cleaning, de-rusting, and protecting any kind of reusable and/or precious objects and property. That's why we supply a range of pH-neutral, safe and innovative cleaning solutions that comply with environmental regulations and minimize the impact on the environment. Our products are designed to provide you with a reliable and efficient solution to your cleaning needs, while ensuring the safety of your staff and the environment. We offer a variety of solutions for cleaning, descaling and protecting metal tools, pipes, installations, boilers, heat exchangers, pump systems and more. Our solutions are effective, yet safe for hands, skin and the environment. In addition, we also provide strong solvents for cleaning sulphate deposits in geothermal, oil and gas wells, mid and downstream installations and systems. Our innovative acid substitutes are perfect for the stimulation of geothermal, oil and gas wells. What sets us apart is our commitment to providing green solutions that are also effective. Our products are certified to be environmentally friendly, effective and comply with all relevant regulations. Our certifications include CEFAS, HOCNF Certificate (Harmonized Offshore Chemical Notification Format), and REACH documentation (Registration, Evaluation and Authorization of Chemicals: European legislation for registration, evaluation and authorization of chemicals). At Cleanstream, we are proud to be your green partner in the industry. We continuously research and develop new and innovative products to provide the best and most efficient solutions for our clients while also ensuring the protection of the environment. Trust Cleanstream to provide you with safe, effective and environmentally friendly cleaning solutions. Contact us today to find out more about our products and services. View Details

4 1/2” Surface-Controlled Subsurface Safety Valve (SCSSSV)

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) is selected for wells that require dependable emergency shut-in capability while handling moderate to high flow rates. This size is appropriate when production demands a larger flow area to minimize pressure drop and maintain efficient fluid flow. It provides essential well control by automatically isolating the wellbore in cases of equipment failure or loss of surface control pressure, ensuring safety without compromising production efficiency.

This SCSSSV is designed for compatibility with 4 1/2" (114.3 mm) tubing and is available with landing nipple seal bores of 3.437", 3.688", or 3.813". It supports working pressures up to 5,000 psi and comes with internal valve bore options of 1.75", 1.87", and 2.12"—allowing operators to balance flow capacity with safety requirements.

The self-equalizing mechanism minimizes differential pressure across the valve during opening, improving control and reducing mechanical wear. With sealing surfaces located outside the flow path in the open position, the valve is less susceptible to erosion and damage during production.

Constructed with a robust flapper made from bar stock, the valve features a flapper-type mechanism that reliably closes to prevent uncontrolled flow. The valve is wireline retrievable, which allows for extraction and servicing of major components without removing the entire tubing string. This capability reduces intervention time and operational costs, contributing to overall well uptime and efficiency.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 26-29 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 33.7-39 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Needle Valves Hex Body Series – Male x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Hex Body Series Male x Female are industrial valves designed for precise flow control in high-pressure systems. The hexagonal body allows for standard wrench access, facilitating installation and maintenance. Male and female NPT connections enable integration into various piping systems, commonly used in instrumentation, process control, and oil and gas applications.

These valves are manufactured according to ASME B16.34 standards and type-tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with options for higher pressures. The metal-to-metal body and bonnet seal provides reliable sealing under high pressure and temperature conditions. Materials can comply with NACE MR 01 75, and the valves operate over a temperature range of -50°C to 230°C, with graphite seals available up to 500°C.

Each valve undergoes factory testing for seat and packing leakage using nitrogen gas at 1000 PSI. The valves feature a back-seated stem, rolled threads, and a mirror-finished stem through the packing, ensuring consistent and smooth operation. The removable T-handle reduces torque requirements during operation, and a dust cap protects the stem threads. The hex body and male-female connections provide a standard interface for connection while maintaining secure and leak-resistant operation.

View Details

Gas Check Valve for LM2500 Gas Turbine

The Gas Check Valve is a unidirectional valve used in LM2500 gas turbine systems to prevent the reverse flow of combustion gases into critical fuel and oil lines. Its primary function is to maintain the correct flow direction, ensuring that gases only travel toward the combustion chamber and not back into upstream components, where reverse flow could cause damage, safety risks, or system inefficiencies.

This check valve is engineered to operate under the high-pressure and high-temperature conditions typical of industrial gas turbine environments. It serves as a passive safety component, requiring no external power to function, and contributes to the overall reliability and integrity of the turbine system.

Commonly found in aero-derivative gas turbines used in oil and gas applications, the check valve is essential for maintaining proper system performance. Its inclusion in the turbine’s gas path helps ensure safe operation by minimizing the risk of combustion gas contamination in auxiliary systems.

View Details

Packer Setting

Enhancing Well Efficiency: InWaTec Combined’s Precision E-line Packer Setting Services The backbone of any well’s structural integrity and operational efficiency lies in the strategic placement and setting of production packers. InWaTec Combined’s E-line Packer Setting Services provide meticulous installation of these critical components, ensuring an optimal seal and isolation within your wellbore. A production packer is not just a piece of hardware; it’s a guardian that ensures the separation of production zones, safeguards the casing from pressure, and enhances the overall management of the well. Our E-line Packer Setting Services cater to both production and service packer requirements, providing versatile solutions tailored to the unique challenges of your well operations. Production Packers: These remain in place during well production, set above the top perforations or sand screens. They are pivotal in multi-zone reservoirs, where they isolate perforations for each zone, allowing for selective production through the use of sliding sleeves. Service Packers: Employed temporarily during well servicing tasks like cement squeezing, acidizing, fracturing, and well testing, service packers are essential for the precise and safe execution of these operations. Packers are designed with a keen eye on reliability—metal slips and rubber elements, or metal rings in high-pressure scenarios, ensure a firm grip and seal against the casing ID. Our E-line Packer Setting Services employ the latest in axial load technology, whether hydraulic, mechanical, or chemical, to expand and secure these packers at the optimal depth. For permanent well configurations, our permanent packers offer a cost-effective and robust solution, boasting superior sealing and gripping capabilities. When retrievability is key, our retrievable packers provide flexibility for secondary recoveries, re-completions, or production tubing changes, with designs that ensure ease of removal and the possibility of reuse after servicing. InWaTec Combined’s commitment to excellence in E-line Packer Setting Services is unwavering. We provide not only the tools but also the strategic foresight and technical support to ensure that your packer installation enhances well performance, maintains integrity, and supports your production goals. Partner with InWaTec Combined for your packer setting needs and experience the assurance that comes from precision, durability, and adaptability. Our services are designed to secure your well’s future, one packer at a time. View Details

Semi-submersible Mobile Offshore Drilling Unit (MODU)

A Semi-Sub has better stability in the harsh environment, a larger deck area, superior constructional and installation features, and higher mobility. A Semi-Submersible Rig or a “Semi-Sub” or a “Semi” or a “Floater” is a drilling rig that is used to drill wells in water depths inaccessible to jack-up rigs (typically water depths greater than 400 ft) or in harsh environments (arctic). Semi-submersible rigs are buoyant and, unlike jack-up rigs which rest on the seabed, float during drilling operations. Contact us for assistance in contracting, intake and management of your upcoming Semi-sub well construction projects. View Details

Double Block & Bleed Valve – Flange x Flange – Ball Isolation with Needle Drain – 3/4” (DN 20) – Class 150 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve Flange x Flange 3/4” (DN 20) with Ball isolation and Needle drain provides dual isolation in oil and gas piping systems. The first ball isolates upstream flow while the second ball isolates downstream flow. The needle drain vents trapped pressure between the two isolation points, making it suitable for instrument or gauge isolation, chemical injection, or sampling in operations where maintenance or measurement is required without interrupting the main process.

This specific 3/4” (DN 20) valve is rated for Class 150 service. It has a flange diameter of 100 mm, a bore of 69.9 mm, a flange thickness of 15.9 mm, and uses four bolts of 1/2” size. The face-to-face length is 203 mm. It is manufactured from materials compatible with oil and gas environments and meets ASME B16.34, API 6D, and ISO 17292 standards for pressure-temperature performance and reliability.

View Details

3" Globe-Style Gas Metering Valve

The 3” Globe-Style Gas Metering Valve is designed to deliver accurate and consistent fuel control in industrial gas turbines, including both Dry Low Emissions (DLE) and Single Annular Combustor (SAC) engine types. This valve ensures that the correct amount of gas fuel is metered into the engine based on real-time operating conditions—essential for achieving stable combustion, optimal turbine performance, and reduced emissions.

With an accuracy of ±3% of flow point and a full-stroke response time of 175 milliseconds, it supports precise adjustments to the fuel-to-air ratio, even under fluctuating load conditions. This level of performance is critical for maintaining turbine efficiency, lowering NOx and CO emissions, and supporting regulatory compliance.

The globe-style design allows for smooth fuel flow control, making it ideal for high-capacity, high-pressure turbine applications, such as those found in the oil and gas industry. Built to withstand extreme temperatures and pressures, the valve is available with certifications such as ATEX Zone 1 and 2, PED, UL, and NEC Class 1, ensuring safe operation in hazardous environments.

This metering valve supports modern turbine control systems and is part of a generation of components that prioritize long-term reliability, reduced maintenance needs, and consistent field performance.

View Details

Remote Operated Vehicle (ROV) Training Courses

Dive into the Depths: Poseidon Robotics Introduces Subsea ROV Training Courses At Poseidon Robotics, we believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise At Poseidon Robotics, we take pride in our team of experienced instructors who bring a wealth of knowledge from years of practical ROV operation and subsea exploration. Our instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Poseidon Robotics Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Poseidon Robotics Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact Poseidon Robotics today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration! View Details

Wireless Infrastructure Design and Implementation

Redefining Wireless Infrastructure for the Oil & Gas Sector: Nulux Network Solutions Leads the Way In the modern era of the oil and gas industry, the intricate operations and vast terrains involved necessitate a robust, efficient, and secure communication network. As reliance on digital solutions becomes more pronounced, so does the need for seamless wireless infrastructure. With Nulux Network Solutions at the helm of wireless infrastructure design and implementation, the oil and gas sector can now look forward to tailored solutions that guarantee optimum connectivity. Bridging Distances and Overcoming Obstacles Geographical distances, challenging terrains, and myriad obstacles are inherent to the oil and gas industry. In such scenarios, traditional hard-line connections might prove ineffective, expensive, or even impossible. This is where Nulux’s expertise in wireless communication links becomes invaluable. With a proven track record of designing and implementing both point-to-point and multipoint radio networks, along with tower construction, rigging, and mesh networks, Nulux offers unparalleled solutions that ensure constant, uninterrupted connectivity. Harnessing the Power of Wireless Access Points As workplaces in the oil and gas sector become more dynamic, the dependency on mobile devices for tasks such as documentation review, QA-QC, and project planning is intensifying. Recognizing this need, Nulux offers top-tier wireless network designs that ensure every corner of your facility, be it the office or the expansive facility floor, remains connected. This not only boosts productivity but also paves the way for substantial time and cost savings. Point-to-Point Vs. Multipoint: Customized Solutions for Diverse Needs Understanding the distinction between point-to-point and multipoint networks is vital. While the former establishes a dedicated link between two distinct points ensuring utmost security and streamlined communication, the latter connects multiple points through a single shared line, facilitating broad-spectrum connectivity. Key Benefits of Opting for Nulux’s Wireless Infrastructure: Boosted Productivity: Seamless connectivity ensures that all personnel, regardless of their location, have unhindered access to centralized data, thereby accelerating operations. Enhanced Security: The private nature of point-to-point networks shields data from potential interceptions, guaranteeing safe data transfers. Cost-Effective Solutions: Especially in scenarios where traditional hard-line installations are impractical, wireless networks present a more economical and feasible option. In conclusion, the sophisticated nature of operations in the oil and gas industry demands nothing short of excellence in communication infrastructure. With Nulux Network Solutions, engineering professionals can expect wireless infrastructure designs that are not only advanced and reliable but are also tailor-made for the unique challenges of the sector. As the industry evolves and the need for reliable wireless tech surges, Nulux remains steadfast in its commitment to stay ahead, ensuring that the oil and gas sector remains seamlessly connected, always. Connect with us today, and let's build the future of wireless communication together. View Details

Pipe Fittings Hex Nipples Male NPT – 1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

The Hex Nipple Pipe Fitting with Male NPT threads is a precision component used to connect two female-threaded pipes or fittings in instrumentation and process control systems. The male tapered threads create a tight, leak-resistant seal when engaged with a corresponding female NPT connection, making it suitable for high-pressure and high-temperature applications commonly found in the oil and gas industry.

Manufactured from high-quality bar stock, the fitting provides strength and durability. Threads are capped and carefully packed to prevent damage during transport. The fitting is marked with the manufacturer’s name, size, material, and heat code for traceability. The design ensures proper thread engagement, reliable sealing, and smooth flow of fluids or gases.

These fittings meet or exceed ASME B1.20.1 standards for NPT threads and are rated according to ASME B31.3 for process piping, supporting safe and consistent operation in industrial environments. The male NPT design allows easy installation while maintaining a durable, leak-tight connection over the life of the system.

View Details

Drive Down Bailer

Enhance Your Downhole Recovery Operations with HOCA Oil Tools' Drive Down Bailers In the intricate world of oil and gas exploration and production, addressing downhole challenges with precision, efficiency, and innovation is key to operational success. HOCA Oil Tools specializes in the development and distribution of premium downhole slick line tools, including our high-performance Drive Down Bailers. Designed for the effective retrieval of debris, our Drive Down Bailers are indispensable for maintaining clear, productive wellbores. Drive Down Bailer: The Ultimate Solution for Debris Retrieval HOCA’s Drive Down Bailers are engineered for maximum efficiency in the removal of sand, debris, and other obstructions from wellbores. These tools are crucial in situations where traditional bailers fail, offering a proactive solution to maintain well integrity and operational flow. Constructed from robust materials, our Drive Down Bailers withstand the harsh downhole conditions, ensuring reliability and durability. Empower Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with tools that solve real-world challenges. Our Drive Down Bailers are a testament to our commitment to innovation, quality, and customer satisfaction. By incorporating these bailers into your operations, you can expect not only to resolve downhole debris issues but also to enhance the overall efficiency and safety of your wellbore maintenance tasks. Investing in HOCA's Drive Down Bailers means choosing a partner committed to your operational success. Embrace the future of downhole operations with HOCA Oil Tools, where efficiency, reliability, and customer satisfaction drive everything we do. Experience the difference in your downhole operations with HOCA's Drive Down Bailers – your solution to maintaining clear, efficient, and productive wells. Trust in HOCA Oil Tools for unmatched downhole solutions that propel your operations forward. View Details

LM2500+G4 SAC Gas Turbine

The Single Annular Combustor (SAC) version of the LM2500+G4 is designed for oil and gas applications that prioritize consistent performance, fuel flexibility, and emissions control—such as LNG facilities, gas processing plants, and pipeline compression, both onshore and offshore.

What makes the SAC version different is its simpler combustor design compared to dual annular or premix types. The SAC uses a through-flow, venturi swirler to ensure an even temperature profile at the turbine inlet, helping extend hot section life. It features individually replaceable fuel nozzles, a durable machined-ring liner, and a thermal barrier coating for better resistance to high temperatures and corrosion. This design supports both dry operation (with higher emissions) and water or steam injection to reduce NOx when needed—making it adaptable to site-specific emission regulations.

The LM2500+G4 SAC builds on the proven LM2500+ design, with approximately 10% more power. This gain comes from increased airflow, improved internal cooling, and material upgrades—while keeping the same number of compressor and turbine stages. The 17-stage high-pressure axial compressor and the basic engine layout remain unchanged, making it easy to maintain and service.

The engine can run on a wide range of liquid and gas fuels, allowing flexibility in remote or supply-constrained locations. It achieves up to 40% thermal efficiency in simple cycle mode. Water-injected operation enables NOx emissions as low as 25 ppm (gas) and 42 ppm (liquid).

In short, the LM2500+G4 SAC is well-suited for high-power mechanical drive and power generation in harsh or remote oil and gas environments, offering a balance of power output, fuel versatility, and emissions control.

View Details