Don't have an account? Join for free
Cart
Special Function Pulling Tools
Elevate Downhole Operations with HOCA Oil Tools' Special Function Pulling Tools In the rapidly evolving landscape of oil and gas extraction, the right downhole tools can be the key to operational success and efficiency. HOCA Oil Tools understands this imperative and responds with our line of Special Function Pulling Tools, engineered to meet the unique challenges faced during downhole operations. Our specialized tools are designed not just to meet but to exceed the demands of modern well interventions, ensuring that every operation is as seamless and efficient as possible. HOCA’s Special Function Pulling Tools: Tailored Solutions for Unique Downhole Challenges Our Special Function Pulling Tools encompass a variety of designs, each tailored to address specific downhole needs and challenges. Whether it's retrieving stuck equipment, deploying complex assemblies, or performing precision interventions, our tools are crafted to provide solutions that enhance operational outcomes. Made with the highest quality materials and precision engineering, HOCA’s Special Function Pulling Tools are the embodiment of our commitment to innovation, quality, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are not just suppliers; we are partners in your downhole success. Our Special Function Pulling Tools are a testament to our dedication to advancing downhole operations through innovative solutions. By choosing our specialized tools, you are not only equipping your operations with top-tier downhole technology but also aligning with a partner dedicated to providing exceptional service and support. Incorporating HOCA’s Special Function Pulling Tools into your downhole operations is a step towards enhanced efficiency, safety, and cost-effectiveness. Our commitment to quality and innovation ensures that our tools stand up to the challenges of the oilfield, driving your operations to new heights of success. Opt for HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who depend on our Special Function Pulling Tools for their unique operational challenges. Elevate your downhole operations with HOCA Oil Tools – where exceptional quality meets innovative solutions. View Details
The Square Body Needle Valve Female x Female is engineered for precise flow control in high-pressure fluid systems commonly found in the oil and gas industry. Its design features a robust square-shaped body, which provides stability during installation and operation, reducing the risk of leaks and mechanical stress. The female x female configuration allows the valve to connect two female-threaded pipes or instrumentation components directly, eliminating the need for additional adapters and simplifying system layout.
The valve operates with a fine-threaded stem that provides smooth, accurate regulation of fluid flow, enabling controlled start, stop, and throttling functions. A metal-to-metal body bonnet seal ensures reliable sealing at high pressures and temperatures, while the back-seated stem and self-centering tip deliver consistent, leak-free shutoff.
These valves are suitable for a range of applications, including instrumentation, process monitoring, sampling, and control systems, where precise flow control and reliable operation are critical. The square body design also facilitates easy wrench access and torque application, making installation and maintenance straightforward in complex piping arrangements.
View Details
Surface Controlled Subsurface Safety Valve NE 2-3/8
The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details
The Double Block & Bleed Valve Flange x Flange 3/4” (DN 20) with Ball isolation and Needle drain provides dual isolation in oil and gas piping systems. The first ball isolates upstream flow while the second ball isolates downstream flow. The needle drain vents trapped pressure between the two isolation points, making it suitable for instrument or gauge isolation, chemical injection, or sampling in operations where maintenance or measurement is required without interrupting the main process.
This specific 3/4” (DN 20) valve is rated for Class 150 service. It has a flange diameter of 100 mm, a bore of 69.9 mm, a flange thickness of 15.9 mm, and uses four bolts of 1/2” size. The face-to-face length is 203 mm. It is manufactured from materials compatible with oil and gas environments and meets ASME B16.34, API 6D, and ISO 17292 standards for pressure-temperature performance and reliability.
View Details
OCTG Casing from 4 inch to 36 inch for oil and gas well completions
OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Casing is the pipe placed in the well that is not exposed to flowing fluids from the reservoir to surface. It is cemented in place and provides strength and stability to the drilled borehole. Our international network of manufacturers and warehouses have almost all weights and grades in stock. View Details
The Single Annular Combustor (SAC) version of the LM2500+G4 is designed for oil and gas applications that prioritize consistent performance, fuel flexibility, and emissions control—such as LNG facilities, gas processing plants, and pipeline compression, both onshore and offshore.
What makes the SAC version different is its simpler combustor design compared to dual annular or premix types. The SAC uses a through-flow, venturi swirler to ensure an even temperature profile at the turbine inlet, helping extend hot section life. It features individually replaceable fuel nozzles, a durable machined-ring liner, and a thermal barrier coating for better resistance to high temperatures and corrosion. This design supports both dry operation (with higher emissions) and water or steam injection to reduce NOx when needed—making it adaptable to site-specific emission regulations.
The LM2500+G4 SAC builds on the proven LM2500+ design, with approximately 10% more power. This gain comes from increased airflow, improved internal cooling, and material upgrades—while keeping the same number of compressor and turbine stages. The 17-stage high-pressure axial compressor and the basic engine layout remain unchanged, making it easy to maintain and service.
The engine can run on a wide range of liquid and gas fuels, allowing flexibility in remote or supply-constrained locations. It achieves up to 40% thermal efficiency in simple cycle mode. Water-injected operation enables NOx emissions as low as 25 ppm (gas) and 42 ppm (liquid).
In short, the LM2500+G4 SAC is well-suited for high-power mechanical drive and power generation in harsh or remote oil and gas environments, offering a balance of power output, fuel versatility, and emissions control.
View Details
HP-3 Hydraulic Set High Angle 9 5/8" Packer
Ballycatter HP-3 High Angle Packer
Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”
The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.
Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.
Key Features:
• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.
• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.
• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.
• Release Options: Features a dual-method release system:
• Straight pull via shearing of pre-set screws.
• Right-hand rotation (approx. 8 turns), followed by straight pull.
• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.
The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.
View Details
Distibuted Control System (DCS) Fiber Ring Upgrades
Elevating Control, Enhancing Connectivity: Distributed Control System (DCS) Fiber Ring Upgrades by Nulux Network Solutions In the dynamic panorama of the oil and gas industry, where precision, control, and uninterrupted communication play a pivotal role in sustaining optimal operational efficacy, Nulux Network Solutions emerges as a beacon of technological innovation and steadfast reliability. With our rich spectrum of products, solutions, and services encapsulating the entire energy value chain, we endeavor to escort our clients towards a future that is not only technologically advanced but also imbibes the essence of sustainability. Unraveling the Intricacies of DCS in Oil & Gas Operations The Distributed Control System (DCS) sits at the nexus of modern industrial processes in the oil and gas sector, ensuring streamlined control, enhanced safety, and optimized operational efficiency through robust and seamless communication. The very pulse of myriad operations, stretching from exploration, extraction, refining to distribution, is synchronized through a well-knit web of data and control signals that circulate through the DCS. Nulux’s DCS Fiber Ring Upgrades: Synchronizing Future with Present As technological paradigms shift, the intrinsic need to elevate the existing infrastructural capabilities becomes imminent. Nulux’s DCS Fiber Ring Upgrades service converges the realms of technological advancements with your existing control systems, ushering your operations into an era where communication is not just seamless but also expansively scalable and inherently secure. Enhanced Data Transmission: Our DCS Fiber Ring Upgrades accentuate your data transmission capabilities, ensuring real-time communication, control, and data accessibility across the entire operational landscape. Fortified Security: In an industry where data integrity is paramount, our fiber ring upgrades bolster the security framework, safeguarding your operational data against potential cyber vulnerabilities. Uninterrupted Operations: Mitigate downtimes and enhance operational continuity with a robust, reliable, and redundantly configured fiber communication network, ensuring that your control systems are always in cohesive synchronization. Scalability for Future: Navigate future expansions and integrations effortlessly with a DCS fiber infrastructure that is inherently designed to accommodate scalability, ensuring your operations are always in tandem with technological advancements. Envisioning a Sustainable Future with Nulux Our commitment at Nulux Network Solutions transcends beyond providing state-of-the-art technological solutions. We are ardently dedicated to propelling our clients on a journey towards a more sustainable future, where every operational stride is in harmony with environmental and societal well-being. Collaborative Journey Towards Excellence Nulux’s DCS Fiber Ring Upgrades is not just a service; it’s a partnership, where we walk hand in hand with our clients in their operational journey, ensuring every technological stride is secure, robust, and resonates with their overarching objectives. Wrapping Up In the fast-paced, ever-evolving domain of the oil and gas industry, let Nulux Network Solutions be your technological ally, ensuring your DCS is not just a control system but a futuristic, secure, and sustainable communication hub that seamlessly synchronizes every operational pulse. Embark on a journey where control, communication, and sustainability coalesce into operational excellence with Nulux Network Solutions. Let's forge ahead, crafting a future where technology and sustainability resonate in unison, ensuring every operational stride is a step towards a more connected, controlled, and sustainable tomorrow. Together, let's weave a network where every data byte accelerates us towards a future sculpted with precision, control, and conscientiousness. View Details
7" HP-5 Hydraulic Set Production Packer 32-35 PPF
Ballycatter HP-5 Production Packer
Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.
The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.
The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.
Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.
View Details
7" HP-6 Hydraulic Set High Angle Production Packer for 20-26 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.
It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.
Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details
The 6″ Butterfly Bleed Air Valve is designed to regulate the flow of compressed bleed air from the compressor section of large gas turbines, such as the LM2500. This valve uses a butterfly-shaped disc permanently attached to a robust shaft, allowing precise control over airflow to reduce pressure and temperature within the turbine system.
With an effective flow area of 19.1 square inches max, this valve accommodates higher volumes of bleed air, making it suitable for turbines with greater airflow requirements. It features a fast response time—less than 320 milliseconds for a full stroke—ensuring timely adjustments to changing operating conditions. The valve’s bearings are engineered for high cycle service, providing durability and reliability even under frequent opening and closing cycles.
The 6″ valve helps protect turbine components by managing thermal loads and maintaining optimal compressor performance, which in turn improves overall turbine efficiency and extends equipment life. It is commonly used in oil and gas applications where maintaining safe, efficient, and reliable turbine operation is critical. This valve also serves as a drop-in replacement in existing turbine systems, requiring no hydraulic or electrical modifications, simplifying installation and reducing downtime.
View Details
The Monoflange SBB Double Block and Bleed Valve with Flange x Thread connections features an OS&Y isolation valve and a needle drain, providing dual isolation in a single compact assembly. It is designed for oil and gas applications where safe venting of trapped pressure between isolation points is required, such as instrument or gauge isolation, chemical injection, and sampling lines.
The valve’s monoflange design integrates both isolation and venting functions in one unit, reducing the number of joints and potential leak paths while saving space and simplifying installation. The OS&Y isolation valve offers clear visual indication of open or closed status, allowing operators to quickly verify valve position. The needle drain provides controlled venting of pressure trapped between the isolation points, ensuring safe operation during maintenance or sampling procedures.
The valve is suitable for flange sizes from 1/2” to 2” and pressure classes from 150 to 2500, with options for reduced or full bore depending on process requirements. It is available in a variety of materials including stainless steel 316, 316L, duplex, super duplex, Hastelloy, Inconel, and Monel, and can be manufactured to meet NACE MR-0175 standards. The design complies with recognized standards such as ASME B16.34, API 6D, and ISO 17292, and is tested to low emission requirements.
This configuration is ideal for oil and gas operations requiring reliable dual isolation, precise venting, and compact installation in critical piping systems.
View Details
7" Mech-1 Single Grip Mechanical Set Packer for 17-20 PPF Casing
Ballycatter Mech-1 Single Grip Mechanical Packer
Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”
The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.
Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.
The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.
View Details
Water Injection Well Flow Control Valve 4.31 inch
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details
M-KWIK Control Line and Cable Protector
Cross coupling protectors are essential tools used in the oil and gas industry during the installation of completions in oil and gas wells. These protectors provide a variety of benefits that make them a necessary investment for any oil and gas company. Protects Control Lines: Cross coupling protectors help protect control lines from damage that can be caused by the installation process, environmental factors, and other external factors. By providing an extra layer of protection, the control line can last longer and reduce the need for costly repairs or replacements. Prevents Fluid Contamination in Cables: Cross coupling protectors prevent fluid contamination by keeping debris and other unwanted materials out of electrical cables during installation. This is particularly important in the oil and gas industry where contamination can lead to significant safety risks, equipment damage, and production losses. Reduces Maintenance Costs: The installation of cross coupling protectors can help reduce maintenance costs. By protecting control lines and cables the completion is less likely to require maintenance or repair. This can result in significant cost savings over the long-term. Improves Efficiency: Cross coupling protectors help to improve the efficiency of the installation process. By providing a secure connection and preventing contamination, the installation process can be completed more quickly and with fewer re-work. This can help to reduce downtime and increase productivity. Enhances Safety: Cross coupling protectors enhance safety by reducing the risk of equipment failure and fluid contamination. This can help to prevent accidents and injuries, and ensure that the installation process is completed safely. The use of cross coupling protectors is critical to the successful installation of tubing in oil wells. They provide numerous benefits including protecting tubing joints, preventing fluid contamination, reducing maintenance costs, improving efficiency, and enhancing safety. By investing in cross coupling protectors, oil and gas operators can ensure the long-term success of their operations while improving their bottom line. View Details
LM2500+G4 SAC 50Hz CC 1x1 Gas Turbine
The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.
Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.
The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.
This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.
View Details
Reducing adapters Female to Male NPT are used to connect pipes or instrumentation lines of different diameters in oil and gas systems. They allow a larger pipe or fitting to join with a smaller one without leaking, ensuring the flow of liquids or gases remains safe and controlled. These fittings are especially useful in situations where space is limited or existing piping needs to be adapted to new equipment.
They are made from high-quality materials such as stainless steel, brass, or carbon steel, which can handle pressures up to 10,000 PSI. The female NPT side threads internally to receive a male pipe, while the male NPT side threads externally to connect to a female fitting. This combination provides a secure, leak-resistant connection that is durable even under high pressure, vibration, or temperature changes.
Reducing adapters are widely used in oil and gas production, processing, and distribution systems.
They are ideal for connecting instrumentation, control systems, chemical injection lines, or any piping where size changes are required. Their compact design and simple installation make them a practical choice for engineers and technicians who need reliable connections in complex piping networks.
View Details
Welding Machine TIG AC/DC 501 Pulse
Unleash Precision Welding with the TIG AC/DC 501 Pulse! At Canaweld, we take pride in providing the oil and gas industry with welding solutions that redefine excellence. Introducing the TIG AC/DC 501 Pulse – a welding powerhouse that embodies power, intelligence, and versatility. Crafted to meet the demands of professional production TIG welders, this welding machine sets the standard for precision and performance. Unmatched Versatility The TIG AC/DC 501 Pulse empowers you with the freedom to choose between AC or DC TIG welding, including stainless steel, mild steel, or aluminum, as well as Stick welding. Whatever your welding application demands, this welding marvel delivers impeccable results, leaving no room for compromise. Power Meets Intelligence Equipped with advanced TIG welding parameters, the TIG AC/DC 501 Pulse allows you to fine-tune your welding process, ensuring exceptional welds tailored to your specific applications. The easy-to-use interface with digital adjustment of all welding parameters puts you in complete control, simplifying your welding experience. Unparalleled Monitoring and Control Experience full monitoring of welding parameters with the digital ammeter and voltmeter, offering precise current presetting and a convenient hold function. The welding process selector enables seamless switching between TIG AC, TIG DC, TIG DC 'Lift,' and MMA modes, catering to diverse welding needs. Choose from 2 Stroke, 4 Stroke, Cycle, and Spot Timer modes with the welding mode selector, adding flexibility to your welding operations. Personalized Welding Programs The TIG AC/DC 501 Pulse takes customization to new heights, allowing you to store personalized welding programs, memorizing your preferred settings for each unique project. This feature streamlines your workflow and ensures consistency in every weld. Precision Pulse TIG Welding Achieve precision like never before with pulse TIG welding, adjustable from 0.5 up to 200 Hz, and take advantage of the "EASY PULSE" feature for added convenience. Fine-tune your welding experience with AC square wave balance and Balance Plus adjustments, as well as AC square wave frequency control. Unleash Your Creativity With the TIG AC/DC 501 Pulse, you have the power to control the arc striking and arc dynamics with tungsten rod diameter presetting. Explore the wave selector with Square, Mixed, Sinusoidal, and Triangular options, providing you with endless possibilities for your welding projects. The Canaweld Promise As with all Canaweld products, the TIG AC/DC 501 Pulse embodies durability, reliability, and excellence. Our commitment to quality and customer satisfaction is reflected in our comprehensive 3-year warranty, giving you the peace of mind you deserve. Elevate your welding capabilities with the TIG AC/DC 501 Pulse. Unleash precision welding like never before and let Canaweld be your trusted partner in achieving welding perfection. Embrace power, intelligence, and versatility with the TIG AC/DC 501 Pulse - Welding Perfected! View Details
Hex Couplings Female NPT are pipe fittings designed to join two male threaded pipes in fluid and gas systems. The female NPT threads provide a tight seal when screwed onto male pipes, ensuring leak-resistant connections. The hexagonal shape allows easy tightening or removal using a wrench, making installation straightforward even in compact spaces.
These fittings are commonly used in oil and gas and process control applications. They are suitable for high-pressure systems, with pressure ratings up to 10000 PSI depending on the material. Hex couplings are available in stainless steel, brass, and carbon steel, offering durability and corrosion resistance in demanding environments.
Sizes available range from 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, to 1”, providing flexibility for different piping setups. Their compact design and reliable performance make them ideal for instrumentation, process piping, and other applications where secure connections are essential.
View Details
The L type 2 valve manifold is a compact and reliable solution designed for connecting impulse lines to pressure transmitters or gauges in industrial systems. Its primary purpose is to allow safe and efficient measurement of process pressures while providing the ability to isolate, vent, or calibrate instruments without disrupting the process.
The L type configuration refers to the layout of the two valves, arranged in an L shape, which allows for simple and intuitive operation. This design enables the user to block the process pressure, bleed off trapped pressure, and perform calibration on static pressure transmitters or gauges. The arrangement minimizes installation space while ensuring clear and accessible operation.
Pipe to pipe manifolds are designed to connect directly to process lines using standard piping connections. This allows for straightforward integration with impulse lines and reduces the need for additional fittings. The manifold provides a secure and leak-free connection while maintaining easy access for maintenance, calibration, and testing of instruments. Overall, the L type 2 valve manifold combines compact design, operational simplicity, and high reliability for critical measurement applications.
View Details
6 5/8" Mech-1 Single Grip Mechanical Set Packer
Ballycatter Mech-1 Single Grip Mechanical Packer
Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”
The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.
Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.
The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.
View Details
Gauge Root Valve Bleed Valve with Vent Screw – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX
The Gauge Root Valve Bleed Valve with Vent Screw is designed for oil and gas applications where controlled pressure release is critical. It is installed on pressure gauges and instrumentation lines to provide a safe and easy way to vent trapped pressure. The vent screw allows operators to gradually release pressure without removing the valve, reducing the risk of sudden pressure surges that could damage equipment or compromise safety.
This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request. It is built to ASME B16.34 standards and produced under ISO 9001, PED, and ATEX quality systems, ensuring reliability and compliance with industry requirements. The design includes a metal-to-metal seal for high-pressure and temperature applications, a durable vent screw that prevents leakage, and easy operation even in confined spaces. Its construction allows for long-term durability and minimal maintenance, providing safe and accurate operation for critical oil and gas instrumentation systems.
View Details
LM2500 Cylindrical Roller Bearing R6
The Bearing, Roller, Cylindrical No. 6R is a precision-engineered component used in LM2500 aero-derivative gas turbines commonly employed in the oil and gas sector. Installed at the No. 6R position, this cylindrical roller bearing supports the turbine’s rotor shaft by carrying radial loads and maintaining accurate shaft alignment during high-speed operation.
Its specialized roller design allows it to withstand intense mechanical stresses and thermal changes typical in demanding oil and gas environments. By reducing vibration and ensuring smooth rotation, the bearing contributes to stable and efficient turbine performance, which is critical for continuous operation in upstream, midstream, and downstream applications.
The No. 6R bearing’s role in maintaining precise shaft positioning supports the overall durability and reliability of LM2500 turbines used in gas compression, power generation, and offshore platforms, making it a key element in sustaining safe and efficient operations within the oil and gas industry.
View Details
Check Valve Poppet Type – Female x Female 3/8" NPT – 6000 PSI – ISO 9001
The 3/8" poppet type check valve with female × female NPT connections allows fluid to flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism responds quickly to flow changes and provides a positive seal under pressure, protecting pumps, pipelines, and other equipment from reverse flow and pressure spikes. This size is suitable for small to medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required.
The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Cracking pressures are selectable from 1/3 to 25 psi to meet system-specific requirements. It is available in corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass.
The valve is designed for reliable long-term operation in demanding oil and gas environments. Its construction ensures consistent performance under varying pressures and temperatures, and the robust poppet mechanism minimizes maintenance requirements while maintaining system integrity over time.
View Details
9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 40-47 PPF Casing
Ballycatter HP-6 High Angle Production Packer
Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”
The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.
It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.
Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.
Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.
Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.
View Details
Tubing hanger with electrical feedthrough for ESP applications
The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility. View Details
ET-30 Single Stage Steam Turbine
Experience Unmatched Efficiency with Kessels ET-30 Single Stage Steam Turbine: Your Powerhouse for Precision In the world of industrial steam turbines, precision, reliability, and efficiency are non-negotiable. Kessels Steam Turbines is proud to introduce the ET-30 Single Stage Steam Turbine, a technological marvel that sets new standards in steam turbine excellence. Mastering Single Stage Steam Turbines Our Single Stage Steam Turbines are the embodiment of economy and reliability, serving as mechanical drives for Pumps, Fans, Knives, Compressors, and Generators. Over the past two decades, our engineering team has tirelessly reviewed customer and consultant requirements, meticulously addressing queries while adhering to the stringent standards of API 611 and 612. Unmatched Performance, Even at Low Pressure Kessels Steam Turbines have earned their stripes across diverse industries, renowned for their exceptional performance even under challenging low-pressure conditions. With over 15 frame sizes and design options, we offer Single Stage Steam Turbines capable of handling steam conditions and applications up to a staggering 4,000 HP in single-stage configurations. Industries Served Our Single Stage Steam Turbines find their utility across a spectrum of industries, including Oil and Gas, Food Processing, Chemical Processing, Pharmaceutical, Steel, Paper, Sugar, Palm Oil, Marine, Edible Oil, Rice, and Fertilizer. Versatility in Applications Kessels ET-30 Single Stage Steam Turbines can be seamlessly integrated into an array of applications, including Pump Drives, Fan Drives, Mill Drives, Generator Drives, Compressor Drives, Knives, and Shredder Drives. Power Capabilities Our turbines boast power capabilities ranging from 100 HP (75 kW) to a formidable 4,000 HP (3000KW), with speeds of up to 17,000 RPM. They can operate efficiently under pressures of up to 65 Kg/cm2 (925 Psig) and temperatures reaching 460°C (860°F). Design Versatility With seven distinct models, including Horizontal (axial and radial split), Vertical, API 611- and 612-compliant, Overhung, and between-the-bearings wheel designs, our turbines offer a range of options to suit your specific needs. Choose between metallic or carbon seals, Electronic/Hydraulic Mechanical governors, customized steam path components, Mechanical/Electronic safety trip systems, and Direct-Drive or integral gearboxes with suitable lubrication systems. Choose Kessels for Unrivaled Excellence Choosing Kessels Steam Turbines is a commitment to excellence, innovation, and reliability. Our ET-30 Single Stage Steam Turbine exemplifies these principles, offering you: Unmatched Efficiency: Harness the power of steam with unmatched efficiency, maximizing productivity while minimizing waste. Reliability Beyond Question: Crafted with precision and subjected to rigorous testing, our turbines ensure uninterrupted operations even in the most demanding industrial environments. Application Versatility: Adapt effortlessly to your unique requirements, confident that Kessels' expertise has you covered. Empower Your Future with Kessels In the competitive landscape of industrial steam turbines, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels ET-30 Single Stage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details
Newton Grabber ROV Manipulator
Unleash the Power of Precision: The Newton Grabber We're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need The priority is simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Quality As pioneers in subsea robotics, we consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration. View Details
HDI 1000P Pressure Gauge System
The HDI 1000P Pressure Gauge System is a battery-powered, intrinsically safe electronic gauge used to monitor high-pressure systems in oil and gas operations. It measures pressure using a strain gauge sensor and provides real-time readings on a digital display with both numeric and bar graph formats. Common applications include choke manifolds, cementing units, coiled tubing, and high-pressure pumping systems.
With pressure ranges available from 5,000 psi up to 30,000 psi, the 1000P is suitable for demanding environments. It offers ±0.5% full-scale accuracy, and optional 4-20mA or 0–1 VDC outputs for integration with PLCs or remote monitoring systems. The unit is housed in a sealed stainless steel enclosure and built to perform reliably in harsh, high-vibration field conditions.
Designed for ease of use, the 1000P includes a field-replaceable battery pack and supports a range of connection types such as 2" 1502, 2002, 2202, or flanged. Its solid-state platform minimizes maintenance and ensures consistent performance over time, making it a dependable tool for critical pressure monitoring tasks.
View Details
Safety Valve (Subsurface) 3.63 inch WI
The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details