The HDI 2000B Pressure Gauge System is a panel-mounted electronic device designed to measure and display high-pressure levels accurately in industrial and oilfield settings. It monitors pressures up to 20,000 psi with an accuracy of plus or minus 0.50 percent of full scale, making it suitable for critical applications where precise pressure monitoring is essential for safety and operational control.

The system consists of two main components: a digital gauge display and a remote pressure sensor connected by an interconnect cable. This design allows the sensor to be installed directly at the pressure source, such as a wellhead, pump, or manifold, while the display is mounted in a more accessible location for easy reading and monitoring.

The gauge features a six-inch liquid crystal display that combines a five-digit numeric readout with an analog bar graph composed of 101 segments. This clear and detailed display makes it easy to quickly understand both the exact pressure value and its trend, even in low-light or harsh environments. The display can be read from up to 35 feet away.

Power is supplied by a replaceable 3.6-volt battery designed to last between 12 and 18 months under continuous operation. Calibration and configuration data are stored in memory that does not require power, ensuring settings remain intact even when the battery is replaced or the system is powered off.

The pressure sensor employs strain gauge technology and is compatible with a wide range of connection types including standard pipe threads and flanges. This allows the system to be used across various equipment and pressure ranges, while simplifying maintenance by enabling cross-compatibility of sensors.

Optional analog outputs provide 4–20 mA or 0–1 volt signals to connect the gauge to control systems, data loggers, or remote displays. This supports centralized monitoring and integration with automated process control.

In oil and gas operations, the 2000B system is commonly used to monitor pressure at wellheads to ensure safe extraction pressures, on pumps to maintain correct fluid flow and prevent overpressure damage, and on manifolds to track pressure differentials between flow lines. Accurate, real-time pressure data from this system helps operators detect anomalies early, avoid equipment failure, and optimize production rates while maintaining safe operating conditions. Its robust design and modular installation make it well-suited for harsh field environments where reliability and ease of maintenance are critical.

Hex Body Needle Valves Female x Female are precision valves designed for accurate flow control and isolation in piping systems. The hexagonal body allows for easy installation and secure tightening using a standard wrench. Both ends have female threads, enabling direct connection to male-threaded pipes or fittings without additional adapters.

These valves are suitable for high-pressure and high-temperature applications, with a standard working pressure of 6000 psi and temperature ratings from -50°C to 230°C, extendable up to 500°C with graphite. They are commonly used in oil and gas, instrumentation, and process control systems to regulate fluid or gas flow, perform system bleed operations, or isolate sections of a pipeline.

The valves feature a metal-to-metal body and bonnet seal for durability, a self-centering non-rotating stem tip for consistent shutoff, and packing located below the threads to prevent process media from reaching the threads. Factory-tested for seat and packing leakage, these valves provide reliable, leak-free performance in demanding environments.

The Gauge Root Valve Female x Female connection is designed to control and isolate pressure instruments in process systems, particularly in oil and gas applications. It is rated for a standard working pressure of 6000 PSI, with the option for higher pressures upon request.

The valve is type-tested to MSS-SP-99 and designed according to ASME B16.34 for pressure-temperature ratings, ensuring reliable performance under demanding conditions.

The valve features a metal-to-metal body and bonnet seal, providing high-pressure and temperature sealing without the need for O-rings. It can operate in temperatures from -50°C to 230°C, with graphite sealing available for applications up to 500°C. The stem has a backseat for added security, and a self-centering, non-rotating tip ensures consistent shutoff and leak-free performance.

The packing is located below the stem threads, isolating the threads from process media, and the gland retainer is easily adjustable for maximum packing stability. The valve includes a removable T-handle for low-torque operation and a dust cap to prevent contamination. All valves are factory-tested with nitrogen at 1000 PSI to verify seat and packing leakage, with a maximum allowable leak rate of 0.1 sec/min.

Materials can be supplied to meet NACE MR 01-75 standards, and heat code traceability is provided. Additional tests, including vibration, temperature, and helium, are available on request. This design ensures long-lasting, reliable operation while protecting connected instruments and maintaining safety in high-pressure systems.

The Double Block & Bleed Valve Flange x Flange 3/4” (DN 20) with Ball isolation and Needle drain provides dual isolation in oil and gas piping systems. The first ball isolates upstream flow while the second ball isolates downstream flow. The needle drain vents trapped pressure between the two isolation points, making it suitable for instrument or gauge isolation, chemical injection, or sampling in operations where maintenance or measurement is required without interrupting the main process.

This specific 3/4” (DN 20) valve is rated for Class 150 service. It has a flange diameter of 100 mm, a bore of 69.9 mm, a flange thickness of 15.9 mm, and uses four bolts of 1/2” size. The face-to-face length is 203 mm. It is manufactured from materials compatible with oil and gas environments and meets ASME B16.34, API 6D, and ISO 17292 standards for pressure-temperature performance and reliability.

Pipe Fittings Adapters Female to Male NPT are designed to connect a female-threaded pipe or fitting to a male-threaded pipe, providing a secure and leak-resistant joint. They are made from high-quality materials such as stainless steel, brass, and carbon steel to ensure durability and corrosion resistance in demanding environments.

The adapters are suitable for a wide range of pressures, with standard ratings up to 10,000 psi, and conform to industry standards including ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228.

These adapters are used extensively in oil and gas applications, instrumentation, and process control systems where it is necessary to adapt different thread types or sizes. Their precise threading ensures maximum engagement and leak-tight connections, making them reliable for high-pressure or critical systems.

Available in sizes ranging from 1/8 inch to 1 inch, these adapters support efficient and safe connections in pipelines, instrumentation panels, and chemical or petrochemical systems. Their compact design allows for installation in tight spaces without compromising performance, and they are free from burrs or debris to maintain smooth flow paths.

The L type 2 valve manifold is a compact and reliable solution designed for connecting impulse lines to pressure transmitters or gauges in industrial systems. Its primary purpose is to allow safe and efficient measurement of process pressures while providing the ability to isolate, vent, or calibrate instruments without disrupting the process.

The L type configuration refers to the layout of the two valves, arranged in an L shape, which allows for simple and intuitive operation. This design enables the user to block the process pressure, bleed off trapped pressure, and perform calibration on static pressure transmitters or gauges. The arrangement minimizes installation space while ensuring clear and accessible operation.

Pipe to pipe manifolds are designed to connect directly to process lines using standard piping connections. This allows for straightforward integration with impulse lines and reduces the need for additional fittings. The manifold provides a secure and leak-free connection while maintaining easy access for maintenance, calibration, and testing of instruments. Overall, the L type 2 valve manifold combines compact design, operational simplicity, and high reliability for critical measurement applications.