The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

The 4″ butterfly bleed air valve plays a crucial role in controlling the flow of compressed air, called bleed air, from the compressor section of a gas turbine. This airflow regulation helps maintain safe and efficient turbine operation by managing pressure and protecting internal components.

This valve is built with a strong bearing shaft and specially designed bearings that handle frequent cycles, ensuring a longer service life and less maintenance. It includes a fail-safe feature that automatically opens the valve if a problem occurs, protecting the turbine from damage. With a quick response time—fully opening or closing in less than 320 milliseconds—it reacts fast to changing engine conditions. The valve’s electric components are also better insulated from heat, improving reliability even in harsh environments.

What makes the 4″ valve stand out is its ideal size and performance. It offers greater airflow than smaller valves, yet remains compact and easier to fit than larger ones, making it perfect for medium-duty applications where space and precise control are important.

Importantly, this valve is designed as a direct, plug-and-play replacement for existing models. It requires no changes to the hydraulic or electrical systems, allowing for quick upgrades without downtime. This seamless fit and reliable operation help ensure your gas turbine runs smoothly and efficiently, reducing costs and increasing uptime.

The LM2500+G4 DLE U PT is a versatile gas turbine designed for a wide range of applications, including onshore and offshore power generation, gas pipeline compression, and LNG compression. It features Dry Low Emissions (DLE) technology, which reduces nitrogen oxide (NOx) emissions to as low as 25 parts per million by volume (ppmv) at 15% oxygen, meeting stringent environmental standards.

In the oil and gas industry, production rates are closely linked to available horsepower. The LM2500+G4 DLE U PT offers higher power output, high reliability, and a lower initial cost per kilowatt, making it a cost-effective solution for energy-intensive operations.

This turbine has proven its capability to operate reliably in extreme ambient conditions, with running data demonstrating performance at temperatures as low as -50°F and start-up capability down to -40°F. This wide operational temperature range ensures dependable service in harsh environments.

Fuel flexibility is a key strength of the LM2500+G4 DLE U PT. It can seamlessly switch between various fuels—lean treated natural gas, rich offshore gas, propane, or diesel—without shutting down or losing efficiency. This flexibility supports energy security, allowing continuous operation even if the natural gas supply is interrupted. Additionally, the turbine can be adapted to burn alternative fuels like bioethanol and naphtha, further enhancing fuel options.

A notable advantage of aeroderivative gas turbines like the LM2500+G4 DLE U PT is their ability to operate on hydrogen blends, which produce no carbon emissions when combusted. Both new turbines and existing units can be converted for high hydrogen fuel use, supporting decarbonization goals.

Moreover, the LM2500+G4 DLE U PT is truly dual-fuel capable, able to switch from 100% natural gas to 100% propane without the need for pilot fuels. This contrasts with dual-fuel reciprocating engines, which typically require about 5% diesel during gas operation, increasing costs and emissions. The LM2500+G4 DLE U PT’s fuel flexibility, emission controls, and robust design make it a reliable and efficient choice for demanding mechanical drive and power generation needs in the oil and gas sector.

The LM2500 High Pressure Turbine (HPT) Vertical Stand is a support fixture designed to hold the HPT module of the LM2500 gas turbine in a vertical position. It is mainly used during maintenance, inspection, or transport of the turbine module.

By keeping the turbine upright, the stand helps ensure that the module stays stable and properly aligned while work is being done. This setup also makes it easier for technicians to access certain areas of the HPT that would be harder to reach if the module were lying flat.

The stand is built to handle the weight of the HPT and includes features like mounting points or forklift slots for safe and easy movement within a workshop or maintenance area. It is commonly used in the oil and gas industry where LM2500 turbines are found in power generation or mechanical drive applications.

In short, the HPT Vertical Stand is a practical tool that helps keep the turbine secure, makes maintenance tasks safer, and supports good handling practices.

The LM2500 DLE Gas Turbine is an advanced power generation unit designed to deliver high efficiency while significantly reducing emissions. Utilizing cutting-edge Dry Low Emissions (DLE) technology, it precisely controls fuel and air mixing to minimize nitrogen oxide (NOx) emissions.

The LM2500 DLE utilizes a single-rotor gas generator with a 16-stage compressor and a two-stage high-pressure turbine, coupled with cutting-edge DLE combustion technology to reduce nitrogen oxide emissions. It supports dual-fuel operation on a wide variety of fuels, including natural gas, diesel, aviation fuel, LPG, and even hydrogen blends with concentrations ranging from 5% to 95%. The turbine’s open configuration allows for faster maintenance and quicker engine replacement, minimizing downtime.

Its key benefit is utilizing advanced aeroderivative gas turbine technology with dual-fuel Dry Low Emissions (DLE) capability, achieving ultra-low emissions of just 15 ppm NOx on gas fuel, combined with broad fuel flexibility—making it ideal for meeting strict environmental regulations while providing fast, reliable power for dynamic grid demands.

The 2” Globe-Style Gas Metering Valve is designed to provide precise regulation of fuel gas flow in industrial and aero-derivative gas turbines. Its globe valve design offers excellent throttling capabilities, allowing fine control over fuel delivery to maintain the optimal fuel-to-air mixture necessary for efficient combustion. This precise control is crucial for achieving stable turbine performance, reducing emissions, and optimizing fuel consumption.

Constructed with robust materials, the valve is built to withstand the high pressures and temperatures commonly encountered in gas turbine applications. Its durable design ensures long service life and reliable operation even under demanding conditions. The valve features foolproof electrical cables and connectors, enhancing installation safety and reducing the risk of connection errors.

The valve’s compact size and right-angle configuration facilitate straightforward integration into existing turbine fuel systems. Compared to previous models, this valve is an upgrade due to its improved electrical interface and enhanced durability, which reduce maintenance needs and increase operational reliability.

By accurately controlling fuel flow, the 2” Globe-Style Gas Metering Valve helps prevent issues such as flame instability and combustion inefficiency, contributing to smoother turbine operation and lower maintenance costs. It is widely used across various turbine models, including aero-derivative and small- to mid-frame industrial turbines, where precise fuel metering is critical for maintaining performance and compliance with environmental standards.