Ballycatter.ca - Industrial Equipment

5-1/2 inch Wireline Retrievable FXE SCSSV

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

5" Mech-2 Double Grip Mechanical Set Packer for 11.5-15 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Thru-Tubing MatrixStixx 2 inch

Introducing Thru-Tubing Acid Stimulation by StimStixx Technologies - Revolutionize Your Operations! Are you looking for a quick, efficient, and environmentally friendly acid stimulation solution? Look no further! StimStixx Technologies is proud to present our cutting-edge Thru-Tubing Acid Stimulation system, designed to meet all your needs with ease and precision. Our innovative product offers a hassle-free deployment process via electric wireline, ensuring a seamless integration into your operations. Available in both HCL and HCL/HF acid blends, our solution guarantees the utmost effectiveness in achieving your desired results. At the heart of our Thru-Tubing Acid Stimulation system lies a specially formulated solid acid stick. Whether you're using slickline, wireline, coil tubing, or tractor-conveyed methods, our solid acid stick delivers heated acid vapor with pinpoint accuracy directly to the zone of interest. This groundbreaking approach ensures increased penetration and contact with the formation, thanks to the highly reactive nature of the heated acid vapor. Not only does our system deliver exceptional performance, but it also provides numerous benefits that will enhance your operations in more ways than one. By utilizing our Thru-Tubing Acid Stimulation, you'll experience reduced CO2 emissions, lower downtime, and simplified implementation. The increased precision and fast-acting nature of our solution will save you valuable time and resources, while also reducing manpower, rig, and equipment costs. Additionally, the elimination of contaminated effluent means a reduced risk of spills at the surface and eliminates the need for post-treatment clean-up or disposal. Join the countless businesses already benefiting from our Thru-Tubing Acid Stimulation system. Embrace efficiency, precision, and environmental responsibility with StimStixx Technologies. Contact us today to revolutionize your operations and unlock a new level of success! View Details

7" Mech-2 Double Grip Mechanical Set Packer for 26-29 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Offshore Mini Coil Unit

Navigating Offshore Challenges with InWaTec Combined’s Offshore Mini-Coil Services Offshore oil and gas operations come with a unique set of logistical challenges. In the face of limited deck space and crane capacity, traditional coiled tubing units (CTUs) often fall short in providing the necessary services without compromising operational economics. InWaTec Combined rises to the occasion with our Offshore Mini-Coil Services, designed to deliver efficient, cost-effective well intervention and maintenance solutions in even the most constrained offshore environments. Compact Efficiency: Our capillary/mini-coil CTU is a game-changer for offshore operations. Its compact design minimizes the footprint on the deck, providing a practical alternative to bulkier traditional units. This space-efficient solution is crucial on platforms where every square foot counts. Lift and Load Advantages: The lightweight nature of our Mini-Coil CTU addresses the common challenges of crane limitations. With the reduced load requirements, our Mini-Coil equipment can be easily maneuvered and set up, facilitating a range of well services without the need for heavy lifting equipment. Versatile Applications: Despite its compact size, the Mini-Coil CTU is robust in capabilities. It's adept at a multitude of tasks, from precision interventions like chemical treatments and scale removal to essential maintenance procedures and even wellbore cleanouts. Economic Solution: InWaTec Combined’s Offshore Mini-Coil Services are not just operationally advantageous; they also present significant cost savings. The reduced logistical demands coupled with the efficiency of our Mini-Coil operations translate into a more economical approach to servicing wells offshore. Customized Service Delivery: Understanding that no two wells or offshore platforms are the same, we offer customized Mini-Coil solutions tailored to the specific requirements of each operation. Our team of experts meticulously plans every aspect of the service delivery, ensuring that it aligns perfectly with our clients' operational and economic objectives. At InWaTec Combined, we are committed to innovation and excellence in offshore well services. Our Offshore Mini-Coil Services embody this commitment, providing operators with the assurance that even under the constraints of limited deck space and crane capacity, their wells can be serviced efficiently and effectively. Choose InWaTec Combined for your offshore well interventions, and experience the strategic advantage of our Offshore Mini-Coil Services. We are dedicated to optimizing your operations, ensuring that your offshore wells maintain peak performance with minimal disruption. Let us bring our compact, powerful solutions to your platform, where space is at a premium, but potential is limitless. View Details

Remote Operated Vehicle (ROV) Training Courses

Dive into the Depths: Introducing Subsea ROV Training Courses We believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise The instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact us today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration! View Details

Electric Submersible Pump Straight Pull 4.5" Packer

The Ballycatter Model WC-ESP Straight Pull 4.5” Packer is a compact, hydraulic-set production packer optimized for ESP completions in 4.5” casing. It features a pass-through section for ESP power cables, allowing seamless electrical connectivity between the surface and the ESP unit below.

The single-mandrel design with Acner Array Packing Element ensures superior sealing integrity, even in high-pressure and high-temperature wells. Its bi-directional slip system resists pressure from both above and below, providing secure anchoring and preventing unwanted movement.

Setting is achieved hydraulically by applying tubing pressure, locking the packer in place for long-term well isolation. Retrieval is simplified through a straight pull mechanism, eliminating the need for complex downhole tools and ensuring fast, efficient removal in standard and deviated wells. Compatible with all major ESP cable pack-off and feed-thru devices, the WC-ESP Straight Pull 4.5” Packer delivers reliability and ease of operation in compact wellbore conditions.

View Details

Alternative Energy Solutions

Unlocking Profitable Alternative Energy Solutions: Mobile, Reliable, and Environmentally Responsible Lovat Gas Solutions is your trusted partner in developing profitable alternative energy solutions. We understand the importance of coordinating a dedicated team of experts and resources to deliver innovative, mobile, reliable, and environmentally responsible solutions that assist our clients and partners in their transition to new energy paradigms. With a key focus on safety, we are committed to helping you achieve your energy goals while maximizing profitability. Why choose Lovat Gas Solutions for your alternative energy needs? 1. Coordinated Expertise: Our team of skilled professionals brings together expertise from various disciplines to provide a comprehensive approach to alternative energy solutions. We coordinate the efforts of our talented individuals and resources to ensure seamless execution and deliver high-quality results. 2. Mobile Solutions: We recognize the importance of mobility in the ever-evolving energy landscape. Lovat Gas Solutions offers mobile energy solutions that can be easily deployed and adapted to your specific requirements. Whether it's mobile power generation, off-grid solutions, or energy storage, we have the flexibility to meet your needs. 3. Reliability: We understand that reliability is a critical factor in the success of your alternative energy projects. Our commitment to delivering reliable solutions is ingrained in every aspect of our work. You can rely on our expertise and experience to provide solutions that consistently meet your energy demands. 4. Environmental Responsibility: At Lovat Gas Solutions, we prioritize environmental responsibility in all our endeavors. Our alternative energy solutions are designed to minimise carbon emissions, reduce environmental impact, and contribute to a sustainable future. We take pride in helping our clients transition to cleaner energy sources with a focus on sustainability. Partner with Lovat Gas Solutions to unlock profitable alternative energy solutions. We are dedicated to understanding your unique energy needs, designing innovative solutions, and delivering tangible results. Whether you require short-term solutions or long-term strategies, our team is here to support your transition to new energy frontiers. Contact us today to discuss your alternative energy goals. Let our experienced team guide you through the process, providing you with mobile, reliable, innovative, and environmentally responsible solutions that drive profitability and contribute to a greener future. Trust Lovat Gas Solutions to be your partner in successful alternative energy initiatives. View Details

Reliant WL Packer

The WL™packer is a new wireline-set, retrievable, high-performance production packer, run in combination with the L-10 on/off tool. The WL can be run as a temporary bridge plug by installing a blanking plug in the L-10 seal nipple, above the packer. This enables remedial or stimulation work above the packer. The plug can then be removed with conventional wireline methods, allowing production of the well to be resumed. View Details

7" HP-6 Hydraulic Set High Angle Production Packer for 20-26 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

MS-52 Multistage Steam Turbine

Elevate Your Energy Solutions with the Kessels MS-52 Multistage Steam Turbine: Unleash Power, Precision, and Performance In the ever-evolving realm of steam turbine technology, Kessels Steam Turbines stands as a beacon of innovation and excellence. For the oil and gas industry, where power and precision are paramount, our MS-52 Multistage Steam Turbine is the ultimate solution – engineered to surpass expectations and redefine industry standards. Dominating Back Pressure Turbines Back pressure turbines, available in both single-stage and multi-stage configurations, serve as the vital link between boiler units and process steam headers. These turbines are the backbone of industries that demand a copious amount of steam, revolutionizing the utilization of steam and electricity generation. The Art of Efficiency At the heart of the MS-52 Multistage Steam Turbine is the hallmark of back pressure turbines: the straight-back pressure design. This engineering marvel ensures the seamless harnessing of exhaust steam, matching process demands with unparalleled precision. Every unit of electrical power generated is consumed as per the process steam demand, making it a pinnacle of efficiency. Applications Without Limits Our MS-52 turbine is not just a machine; it's a versatile workhorse ready to excel in various applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Take a giant leap towards sustainability by utilizing our turbine to generate electricity. It powers generators with clean and efficient steam energy, reducing your carbon footprint. Bleed Back-Pressure Steam Turbines At Kessels, we understand that adaptability is key. Our MS-52 turbine comes equipped with built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are the order of the day. Kessels turbines seamlessly blend the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents come to the forefront. Operating efficiently under intermediate pressure levels, these turbines ensure a steady and reliable steam supply that your operations can depend on. The Kessels Advantage Choosing Kessels Steam Turbines is more than a business decision; it's a choice of a partner committed to your success. Our MS-52 Multistage Steam Turbine embodies our unwavering dedication to innovation, performance, and customer satisfaction. Key Benefits of the MS-52 Multistage Steam Turbine: Unparalleled Efficiency: Maximize steam utilization while minimizing waste. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations. Unmatched Versatility: Adapt effortlessly to changing needs, be it for drive applications or sustainable power generation. A Greener Future: Harness steam power for electricity generation, reducing your environmental impact. Dedicated Support: Our team of experts is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the competitive world of the oil and gas industry, every advantage matters. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-52 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward a future of success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

Single Row Deep Groove Ball Bearing

Deep groove ball bearings are similar to traditional bearings but have raceways that closely fit the dimensions of the balls that run in them. These deep grooves result in balls that are more stable and can handle higher loads than shallow-groove bearings. View Details

Offshore Electric Line Services

Navigating the Depths: InWaTec Combined's Advanced Offshore E-Line Services In the challenging and complex world of offshore operations, precise and dependable wellbore data transmission is not just beneficial—it's crucial. At InWaTec Combined, our Offshore Electric Line (E-Line) services are the cornerstone of our well diagnostics and intervention solutions, designed to conquer the unique demands of the offshore environment. An E-Line, in its simplest form, is a robust electric cable. Yet, when deployed by InWaTec Combined, it becomes an integral part of offshore operations, a sophisticated tool that delves into the wellbore's mysterious realms. Our E-Line services excel in transmitting real-time data about the wellbore's conditions back to our offshore experts, ensuring that critical decisions are made with the utmost information at hand. Our E-Line's forte lies in its versatility and utility in conducting a plethora of logging activities essential for evaluating the well's integrity, formation properties, and hydrocarbon potential. These activities enable a comprehensive understanding of the well, providing insights necessary for optimizing production and ensuring the safety of offshore operations. The offshore environment poses unique challenges with its unpredictable nature and the sheer scale of operations. InWaTec Combined's E-Line services are designed to be resilient and adaptable, capable of withstanding the high pressures and corrosive elements found in the deep sea. Our commitment to innovation means that our E-Line technology is continuously evolving, pushing the boundaries of what is possible in offshore data gathering. By choosing InWaTec Combined's Offshore E-Line services, our clients receive more than just data—they gain a strategic advantage. With our advanced technology and expert analysis, we provide the insights necessary to maximize well performance, extend the life of offshore assets, and enhance the overall safety and efficiency of offshore operations. In an industry where the margin for error is slim and the consequences significant, InWaTec Combined stands as a beacon of reliability and excellence. Our Offshore E-Line services are not just a component of your operations—they are a pivotal part of your success story, deep beneath the waves. View Details

Pumpjack C-320D-256-144 for application in the majority of oil wells

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. View Details

LM2500 Fixture, Hinge for Upper Compressor Case

LM2500 Fixture, Hinge – Upper Compressor Case is a specialized tool set designed to safely raise and hinge open the upper compressor case of the LM2500 gas turbine engine. This fixture is essential during major maintenance, inspection, or overhaul activities where access to the engine’s internal compressor components is required.

The fixture allows maintenance teams to lift and securely hold the heavy upper compressor case in a hinged, open position. This provides stable and safe access to the compressor rotor and other internal parts, ensuring technicians can carry out detailed inspections or repairs without risking damage to sensitive components.

Made from strong, durable materials, the fixture set is built to support the heavy upper compressor case while keeping everything properly aligned. Its reliable locking and hinge system holds the case securely in place, helping protect the gas turbine.

Compatible with both OEM and MRO procedures, this fixture supports efficient, repeatable maintenance practices and helps reduce overall engine downtime. Whether used in the field or in a dedicated maintenance facility, the LM2500 Hinge Fixture is a critical tool for safe and effective servicing of the LM2500 engine’s compressor section.

View Details

3” Tubing End Locator

The 3” Tubing End Locator is a mechanical downhole tool used to identify the precise end of a 3-inch production tubing string during well intervention operations. It provides a clear physical indication when the tool reaches the bottom of the tubing, helping to ensure accurate placement of equipment inside the well.

Designed specifically for tubing with a 3-inch outer diameter, the tool features a maximum outside diameter of 2.500 inches. This sizing ensures smooth movement within the tubing while maintaining close contact, allowing the tool to operate effectively without the risk of sticking or misalignment. At the core of the design is a spring-loaded finger mechanism that extends outward when the tubing end is reached. This mechanical movement is transmitted to the surface as a tactile response, signaling that the tubing bottom has been contacted.

The tool includes standard threaded connections—such as a 15/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—which makes it compatible with a variety of toolstring configurations. It can be easily incorporated into slickline, wireline, or coiled tubing assemblies without the need for special adapters.

Constructed from durable, corrosion-resistant materials, the tubing end locator is built to perform reliably in downhole environments that involve high pressure, elevated temperature, and exposure to fluids. Its fully mechanical operation ensures a high level of dependability and minimizes the need for maintenance, especially in conditions where electronic systems may not be suitable.

The 3” Tubing End Locator is a practical solution for confirming tubing depth when preparing the well for further intervention.

View Details

LM2500+G4 SAC 50Hz SC Gas Turbine

The LM2500+G4 SAC 50Hz Simple Cycle is a fourth-generation aeroderivative gas turbine of the LM2500. Designed for industrial power applications, including those in the oil and gas sector, it delivers more output and greater thermal efficiency while retaining the ease of maintenance and high reliability the LM2500 series is known for.

In a simple cycle configuration, the gas turbine generates power directly by expanding hot gases through the turbine stages, without recovering heat for additional power generation. This design is favored for its simplicity, lower capital cost, faster start-up, and suitability for mobile or remote applications.

The LM2500+G4 improves upon its predecessor by increasing airflow and turbine cooling capacity, allowing for higher operating temperatures. These changes result in up to 40% thermal efficiency in simple cycle mode—an impressive figure for this class of turbine. This translates to improved fuel usage and reduced operational costs over time.

The engine features a Single Annular Combustor (SAC), which supports stable combustion with low emissions of nitrogen oxides (NOx) and carbon monoxide (CO). The combustor is also designed for durability and long life, with easily replaceable fuel nozzles and a thermal barrier coating for resistance to high temperatures and corrosion.

Its two-spool design means the engine has no cold start limitations, making it well-suited for harsh or variable environments. The power turbine and gas generator can be separated, allowing for easier in-module repairs and less downtime.

Overall, the LM2500+G4 SAC 50Hz Simple Cycle offers a balance of power, efficiency, and maintainability, making it an attractive solution for power generation and mechanical drive needs in industrial, onshore, and offshore oil and gas operations.

View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

3” Gas Fuel Isolation Valve

The 3” Gas Fuel Isolation Valve is a solenoid-pilot actuated sleeve-style valve designed specifically for aero-derivative gas turbines. It features a three-inch outlet flange and operates on dual voltage ranges of 24 or 95-140 VDC, providing flexibility for various power systems without compromising performance.

Constructed entirely from stainless steel, the valve complies with NACE standards for corrosion resistance, ensuring durability in harsh environments. It is engineered to withstand heat soak temperatures up to 300°F, making it suitable for high-temperature applications commonly found in turbine fuel systems.

Certified to CE-ATEX standards for Zone 2, Group IIA, Category 3, T3 temperature class, the valve is qualified for use in hazardous and explosive atmospheres, enhancing operational safety.

This valve acts as a critical safety device by isolating the fuel supply during emergency shutdowns or fuel system failures, preventing potential damage to the turbine. Typically deployed in pairs, it offers dual-redundancy to maintain safety even if one valve fails.

The valve is widely used in industrial gas turbine fuel systems where rapid and reliable fuel isolation is critical. Its design supports fast shutoff to prevent damage caused by fuel control failures or stuck throttle conditions. The valve’s durability and compliance with industry standards make it a dependable choice for maintaining operational safety in challenging environments.

View Details

K Storm Choke 2 inch

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

MC Injection Valve 1-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Hornet Packer

The mechanically set HORNET™ packer offers ease of operation with quarter-turn right to set and release. Converting it for wireline-setting applications is simple and inexpensive. The HORNET packer provides for landing in compression, tension, or neutral positions. Every component from the jay track, to the internal bypass, to the packing-element system and the upper slip assembly has been developed to ensure the HORNET’s setting and releasing reliability. The HORNET EL packer is run and set on electric line using an E-4™ (Product Family No. H43702) with a slow-set power charge or a J™ setting tool (Product Family No. H41371) and a special wireline adapter kit. An L-10™ type on/off seal nipple is run on top of the packer to connect the tubing to the packer and to house a blanking plug when the packer is used as a temporary bridge plug. We can source from current stock or direct from the manufacturer. View Details

7 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Oclansorb Oil Spill Clean-up Material

Oclansorb is 100% organic and non-toxic material which absorbs oil on contact. This oil absorbent is biodegradable and can be used on land and on water. Oclansorb is made from sphagnum peat moss and will absorb oil and hydrocarbons but not water. It is 15 times more absorbent than clay, translating into one 18 pound bag of Oclansorb being as effective as 450 pounds of clay. This improves the efficiency of clean-up operations as only 1 bag of Oclansorb replaces the shipping and handling of nine 50 pound bags of clay. On land, apply Oclansorb over the area with hydrocarbon contamination and lightly brush the Oclansorb around. The surface can be dry or wet, as Oclansorb does not absorb water. The oil is absorbed on contact, and the captured volumes can be disposed of in landfills or incinerated (as approved by local authorities). On water, cover the oil with Oclansorb as completely as possible. In wavy or flowing conditions, a boom should be used to concentrate the oil. The hydrocarbon will absorb on contact with Oclansorb, and mixing the material to expose more surface area to the hydrocarbons increases absorption. View Details

Slickline Toolstring

2 9/16" Coiled Tubing Hanger, Rated 5M

The 2 9/16” 5M Coiled Tubing Hanger is a tool designed to securely hold coiled tubing in place during well operations where pressure can be high—up to 5,000 psi. It is built to support heavy coiled tubing and the equipment attached to it when performing tasks deep inside the well.

This hanger works with coiled tubing sizes of 1 inch, 1¼ inches, 1½ inches, and 1¾ inches in outside diameter, making it suitable for a range of tubing types used in different well operations. It connects to the wellhead using standard flanged connections.

A special feature of this hanger is its wireline entry sub. This part acts as an extra seal around the tubing to maintain pressure control in the well while allowing wireline tools to pass safely through the tubing. The wireline entry also prevents the tubing from moving upwards during operations, which helps protect the equipment and maintain well safety.

The hanger is powered by electricity, which supports reliable operation in the field. Overall, the 2 9/16” 5M Coiled Tubing Hanger helps keep the tubing stable, maintain well pressure, and allow tool access during important tasks like cleaning the well, stimulating production, or running diagnostic tools.

View Details

HDI 2100 Pump Stroke Counter System

When it comes to accurate and reliable monitoring of mud pumps, the HDI 2100 Pump Stroke Counter stands as the industry's leading solution. Designed as an intrinsically safe, certified, solid-state electronic stroke counter, the HDI 2100 ensures precise tracking and display of total accumulated mud pump strokes and stroke rates. Seamless Integration with the HDI 9000 Choke Console System: The HDI 2100 is most commonly found within the HDI 9000 Choke Console System, where it plays a vital role in monitoring and displaying the stroke data of up to four individual mud pumps simultaneously. With its advanced capabilities, this stroke counter provides real-time insights into pump performance, enabling operators to make informed decisions for efficient drilling operations. Uncompromising Precision and Reliability: Equipped with a quartz crystal oscillator, the HDI 2100 delivers high-precision stroke counts with zero drift. This ensures accurate and reliable measurement, even in harsh environments and high vibration conditions encountered in land and offshore drilling. Constructed with a stainless steel case and stainless steel piezo switches, the HDI 2100 is built to withstand the toughest conditions for long-lasting performance. User-Friendly and Low Maintenance: Once installed, the HDI 2100 requires virtually no maintenance or calibration, allowing you to focus on your operations with confidence. The solid-state display provides clear and reliable information, while the simple interface allows for easy calibration when needed. Battery-powered operation ensures portability and convenience, while a low battery indicator keeps you informed about power levels. Versatile Configuration Options: The HDI 2100 offers various configuration options to suit your specific needs. You can choose between micro-switch or proximity sensor inputs, depending on your preference and operational requirements. Dual sensors are also available for seamless integration with HMI/PLC systems, enhancing the automation capabilities of your drilling processes. Certifications You Can Trust: The HDI 2100 Pump Stroke Counter is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Experience the HDI Advantage: With the HDI 2100 Pump Stroke Counter, you gain access to unrivaled accuracy, reliability, and ease of use. Our commitment to excellence ensures that all HDI Gauges provide safety, accuracy, reliability, and low maintenance for our valued customers. Contact our experienced team today to discuss your specific monitoring requirements and discover how the HDI 2100 can revolutionize your mud pump operations. Trust Houston Digital Instruments for the ultimate monitoring solution. Where Safety Meets Performance - HDI, your partner in precision measurement. View Details

5.5 inch Depthstar Surface Controlled Subsurface Safety Valve

Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 26-29 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Wireline Spear – Downhole Fishing Tool – 1. 1/2”, 1 3/4", 2 1/4”, 2 3/4", 3 1/2” – ISO 9001:2015

The Wireline Spear is a downhole tool used in oil and gas wells to retrieve lost, broken, or compacted wireline that cannot be engaged with a standard two-prong wireline grab. It is designed for fishing operations where the wireline has become badly balled up or tightly compacted, situations where conventional pronged grabs are ineffective.

The tool is deployed on a wireline and guided down the wellbore under its own weight. Its central mandrel is surrounded by upward-pointing barbs or slips that penetrate and anchor into the wireline. When engaged, these barbs provide a secure grip on the wire, allowing the tool and wire to be retrieved to the surface.

The Wireline Spear is designed for maximum penetration into tightly balled or compacted wire. Its barbs ensure engagement even when the wire is severely entangled. Because the Wireline Spear is effectively non-releasable, it is typically run with a disconnect arrangement above the tool. This allows the assembly to be released if the wire cannot be recovered fully, preventing the tool from becoming stuck in the wellbore.

The tool is available in sizes from 1.5” to 3.5”, with a maximum outside diameter of 1.500” to 3.500” and a fishing neck O.D. of 1.375” to 2.312”. It connects to the wireline through a top connection ranging from 15/16 – 10 UN to 1-1/16 – 10 UN and can retrieve wire diameters from 0.50” to 3.50”.

The Wireline Spear is constructed from steel to withstand downhole mechanical stresses and pressures. Its design includes a central mandrel with upward-pointing barbs that secure tightly compacted or balled-up wireline. The tool’s compact dimensions and engagement mechanism allow it to retrieve wireline that cannot be captured by standard pronged grabs, and it is generally run with a disconnect arrangement above the tool to allow release if the wire cannot be recovered.

View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

C-SRL-CL Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

2 1/2" Tubing End Locator – 1.750" Max O.D. – 15/16-10 UN Pin × 1-11 1/2 NPT Box – For 2" to 2 1/2" Tubing

In oil and gas well operations, the 2 ½” Tubing End Locator plays a critical role in confirming the exact depth at which production tubing terminates within the wellbore. Accurately identifying the tubing endpoint is essential during various well intervention activities, including maintenance, workovers, and the installation or retrieval of downhole tools and equipment.

During operations such as setting packers, deploying plugs, running logging tools, or performing fishing jobs to recover stuck equipment, precise knowledge of tubing length ensures that tools are positioned correctly. This prevents accidental over-pumping or tool deployment beyond the tubing into the open hole section of the well, where damage to equipment or tool loss can occur.

The 2 ½” Tubing End Locator is designed specifically to fit tubing with an outer diameter of approximately 2 ½ inches. It features a compact maximum outside diameter of around 1.750 inches, allowing it to pass easily within the tubing without causing obstruction. The tool employs a spring-loaded finger mechanism that activates mechanically upon reaching the tubing bottom. This signal does not rely on electronic sensors or depth measurement devices, making the tool highly reliable even in harsh downhole environments where electronics may be compromised by pressure, temperature, or fluid conditions.

Standardized threaded connections on the tool—typically a 15/16 - 10 UN pin on the top and a 1 - 11 1/2 NPT box on the bottom—enable it to be seamlessly integrated into a wide range of intervention toolstrings. These common connection types ensure compatibility with existing downhole equipment and facilitate quick assembly and deployment.

Manufactured from high-strength alloy steel or similar materials, the tubing end locator is built to withstand typical downhole conditions, including high pressure, elevated temperatures, and corrosive fluids commonly found in oil and gas wells. Its purely mechanical design minimizes maintenance requirements and reduces the risk of failure compared to electronic alternatives.

This tool is particularly valuable in wells where tubing length may have changed due to wear, repairs, or previous interventions, offering an essential measure of control and confidence in complex well environments.

View Details

Toolbox for hand tool storage on industrial worksites

The usefulness of the tool box is unmatched as it provides safety, protection and easy access to tools. By storing your tools, you'll increase their working life. Storing your tools prevents them from collecting dust, grease, and rust. If you take care of your tools, they'll last longer and perform better. Storing your tools in a toolbox also allows you to save money, as you'll avoid having to replace damaged ones. Not to mention your tools won't "walk away" when you are not looking. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 20-23 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

CSA 12 unit, non-Locking FAST charger rack

Optimize Your Charging Process with the CSA 12 Unit Non-Locking FAST Charger Rack from Provix Provix is pleased to offer the CSA 12 Unit Non-Locking FAST Charger Rack (Part # NWI-NWCR-12BC), a streamlined and efficient charging solution ideal for modern mining, construction, and industrial environments. This charger rack is designed to rapidly charge up to 12 units, making it perfect for smaller teams or spaces. Rapid Charging for Minimal Downtime The CSA 12 Unit FAST Charger Rack is engineered for speed and efficiency, charging WISE LITE2 units in just 4 hours and LAMP3A/4A models in 5 hours. This quick charging capability is crucial for operations where equipment needs to be ready and operational with minimal delay, ensuring continuous productivity. Compact and Space-Saving Design With its non-locking, single-sided design, the CSA charger rack is an ideal solution for operations with limited space. Its compact footprint allows for convenient placement in equipment rooms, workshops, or mobile units, maximizing the utility of available space without sacrificing charging capacity. Versatile and User-Friendly The CSA 12 Unit Charger Rack is not just efficient and space-saving; it’s also incredibly user-friendly. Its straightforward design allows for easy access to all charging ports, facilitating the efficient management of multiple devices. This accessibility is especially beneficial in fast-paced work environments where time is of the essence. Durable and Reliable Construction Constructed to withstand the tough conditions typical in mining and industrial settings, the CSA charger rack is both durable and reliable. Its robust build ensures long-term performance, representing a sound investment for operations focused on efficiency and reliability. Ideal for Various Operational Sizes Whether you are part of a smaller mining crew, a construction team, or managing a rental fleet, the CSA 12 Unit Non-Locking FAST Charger Rack is an excellent choice. It allows for effective management of multiple devices, making it versatile for different operational needs. Get Your Charger Rack Today Upgrade your equipment charging station with the Wisdom CSA 12 Unit Non-Locking FAST Charger Rack from Provix. Visit www.provix.net now to learn more about this efficient, space-saving charging solution and take a step towards optimizing your operation’s productivity. View Details

SCSSSV Type NE 3-1/2 inch

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

Upgrade of existing copper DCS network

Upgrading Your Lifeline: Nulux’s Proven Expertise in Copper DCS Network Enhancement Navigating the demands of modern-day industrial operations, particularly in the oil and gas sector, necessitates a robust, dependable, and high-performing Distributed Control System (DCS) network. It's more than an infrastructure; it's the operational lifeline that engineers and professionals in the industry lean on for seamless, uninterrupted, and efficient management of processes. But what happens when this lifeline requires enhancement to meet the escalating demands of your evolving operations? This is where Nulux Network Solutions steps in, fortifying your operational backbone with our unparalleled upgrade services. Elevating Your Operational Efficacy with Upgraded Copper DCS Networks Steeped in two decades of prolific experience, Nulux has pioneered numerous industrial projects in North America, specializing in elevating existing copper networks to meet the next level of operational demands, especially in DCS network upgrades. Our seasoned team, wielding a wealth of knowledge in installing, repairing, and upgrading a myriad of copper cabling systems, ensures your DCS network isn’t merely functional but is a testament to peak performance and reliability. The Nulux Advantage: Upgrading with Precision, Experience, and Technical Mastery When your copper DCS network signals a need for an upgrade, the Nulux team becomes your strategic ally, ensuring the transition is not just seamless but also significantly amplifies your network’s efficiency, reliability, and performance. Here's how we elevate your existing DCS networks: Holistic Network Assessment: Our experts delve deep into your existing network, identifying latent potential and areas necessitating upgrades to ensure that the enhanced network is inherently aligned with your operational demands. Strategic Upgrade Planning: Our plans are carved from a place of operational understanding, ensuring the upgrades augment not just the network’s technical performance but also enhance your process management, control, and data flow. Tailored Solutions: Our upgrade solutions are crafted, ensuring they are inherently in sync with your specific requirements, be it in voice, data, or video services, ensuring the upgraded DCS network is a perfect fit for your operational landscape. Uninterrupted Support: Beyond the upgrade, we stand beside you, offering consistent technical support, ensuring your enhanced network continues to operate at peak performance throughout its lifecycle. Why Copper Remains King: Sustaining Reliability and Performance Copper networks have steadfastly held their ground as a preferred choice for structured cabling due to their high-bandwidth transmission capability, long-term reliability, ease of installation, and cost-effectiveness. Your upgraded DCS network, enriched by the myriad benefits copper brings, becomes a solid, reliable, and efficient operational backbone, ensuring enhanced control, communication, and data management across your industrial processes. Aligning with Nulux: Upgrading Your Network, Upgrading Your Success Choosing Nulux as your copper DCS network upgrade partner translates to aligning with a team that understands networks beyond their technical framework. Our solutions are derived from an innate understanding of what businesses, especially in the oil and gas sector, require to maintain a competitive edge. Our legacy, crafted over 20 years, speaks of our commitment, expertise, and unwavering dedication to delivering high-quality network solutions. It’s not just about staying connected; it’s about ensuring that every pulse of your network propels your operations toward unbridled efficiency and success. Let’s explore how your existing copper DCS network can be transformed into a superior, high-performing asset, driving your operations to new heights of efficiency and control. Connect with Nulux Network Solutions today for a comprehensive consultation and pave the way towards an upgraded operational future. View Details

Storm Choke 1-1/2 inch K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Hydraulic hoses for industrial equipment applications

Just like a hose you might use to water your garden, the purpose of a hydraulic hose is to allow fluid to flow from one component to another – in this case hydraulic fluid. The hose is the conduit that ensures the fluid is able to travel unimpeded and it's a vital part of keeping hydraulics systems moving. A hydraulic hose is used anywhere in a hydraulic system requiring a flexible connection between two fluid ports. A hydraulic hose is a synthetic rubber tube surrounded by some sort of flexible strength enhancing winding, such as metal or fiber, and then covered in another rubber carcass. Flow velocity is determined by both the hydraulic pump's flow rate and the hydraulic hose size. Changing the flow rate of the hydraulic pump but leaving the hydraulic hose size the same will affect flow velocity. Standard high pressure hydraulic hose 1SN can in -40°C to +100°C, ID 4.8–50.8mm, OD 11.8–64mm, operating pressure 40–250, burst pressure 160–1000 bar. View Details

Tubing Slip Stop

Enhance Well Operations with Precision: Discover HOCA Oil Tools' Slip Stop In the world of oil and gas, where the margin for error is minute and the demand for efficiency and safety is paramount, the right downhole tools can make all the difference. At HOCA Oil Tools, we specialize in providing top-tier downhole slick line tools designed to meet and exceed industry challenges. Among our esteemed solutions is the Slip Stop, a critical component designed to bolster downhole operations' safety and effectiveness. HOCA's Slip Stop: The Cornerstone of Safe and Efficient Downhole Operations The Slip Stop by HOCA Oil Tools is engineered to provide unmatched reliability and control in various downhole environments. Crafted with precision from high-grade materials, this tool is designed to anchor securely within the wellbore, preventing the unwanted movement of downhole tools and equipment. It is an essential tool for ensuring the safety and success of numerous downhole activities, from well completion to intervention tasks. Experience the Unparalleled Quality of HOCA Oil Tools At HOCA Oil Tools, our commitment to excellence is reflected in every tool we provide, including the Slip Stop. We understand the complexities and challenges of downhole operations, which is why we are dedicated to delivering solutions that not only meet but exceed the expectations of the oil and gas industry. Incorporating the HOCA Slip Stop into your downhole operations is a step toward safer, more efficient, and more cost-effective well management. Our tools are designed with the end-user in mind, ensuring ease of use, reliability, and, most importantly, operational safety. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who rely on our Slip Stop to enhance their operational capabilities. Partner with us, and elevate your downhole operations with tools crafted for excellence and innovation. With HOCA Oil Tools, you're not just investing in a product; you're investing in peace of mind, operational integrity, and the future success of your downhole activities. View Details

Offshore Baskets

Attention all logistics managers and shipping professionals - if you're looking for a reliable and versatile solution for transporting and storing goods with unusual heights and dimensions, look no further than Sivam's Offshore Cargo Baskets! Our cargo baskets are designed to be flexible and adaptable, with lashing points that allow you to add tarps for added protection or simply use them as open tops. Thanks to their unique shape, these baskets can carry an unusually large weight for their size, making them the perfect choice for maximizing floor space and optimizing ease of use. At Sivam, we take safety and quality seriously, which is why our offshore baskets are DNV certified. You can trust that your goods will be safely stored and transported when you choose Sivam's Offshore Cargo Baskets. Our base in Italy means that we can serve clients all over the world, offering reliable and efficient shipping solutions no matter where you're located. We understand the importance of timely and dependable shipping, which is why we're committed to providing our customers with the best possible service. Don't settle for less when it comes to transporting and storing your valuable goods. Choose Sivam's Offshore Cargo Baskets and experience the difference in quality and convenience today! View Details

CSA 60 unit, Locking FAST charger rack

Supercharge Your Operations with the CSA 60 Unit Locking FAST Charger Rack from Provix Provix is excited to announce the latest addition to our product line: the CSA 60 Unit Locking FAST Charger Rack (model NWI-NWCR-60BLC-SSI). This single-sided charging powerhouse is designed to meet the high demands of modern mining operations, offering rapid and secure charging for up to 60 units simultaneously. Efficient Charging for Wisdom Lamps The CSA 60 Unit FAST Charger Rack is optimized for the WISE LITE2, LAMP3A, and 4A models, providing a fast charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This efficiency is crucial in minimizing downtime and keeping your team's equipment ready for action. High-Capacity Design Designed to accommodate up to 60 units, this charger rack is ideal for large-scale mining operations. The single-sided configuration makes it a space-saving solution, fitting easily into equipment rooms or designated charging areas. Enhanced Security with Locking Feature One of the standout features of the CSA charger rack is its locking mechanism. This added security ensures that your valuable equipment is protected while charging, providing peace of mind in busy or public workspaces. Durable and Reliable The charger rack is built to withstand the tough conditions of mining environments. Its robust construction ensures long-term reliability, making it a wise investment for any mining operation looking to streamline its charging process. Perfect for Large Teams and Operations Whether you're equipping a large mining crew or managing a fleet of rental equipment, the CSA 60 Unit Locking FAST Charger Rack is an essential tool. Its ability to charge multiple units simultaneously not only saves time but also ensures that all necessary equipment is charged and ready for use. Upgrade Your Charging Setup Today The Wisdom CSA 60 Unit Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to learn more about this efficient, secure, and space-saving charging solution. Stay ahead of the game with Provix's advanced mining equipment. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details