Ballycatter.ca - Industrial Equipment

The LM2500+ gas turbine delivers increased power and improved efficiency by building on the proven LM2500 platform. Designed to meet the demanding needs of industrial and offshore operations, it offers a compact, reliable solution for power generation and mechanical drive applications.

The LM2500+ enhances the original LM2500 design by adding a 17-stage high-pressure axial compressor. This additional compressor stage increases airflow and raises the engine’s pressure ratio, resulting in roughly 20% more power output. The turbine uses a ring combustion chamber with advanced dry low emissions (DLE) technology, producing very low levels of NOx and CO emissions to meet strict environmental standards.

A key feature of the LM2500+ is its low-speed turbine section, which is specifically designed for offshore platforms and other space-restricted environments. This turbine’s compact size and modular design allow for easy maintenance, with split compressor casing and in-place blade replacement that reduce downtime and operational complexity. The turbine is factory-tested and pre-wired for straightforward installation, supporting both 50 Hz and 60 Hz power generation without the need for additional equipment like reducers.

Operators benefit from the LM2500+’s enhanced power and fuel efficiency, which help reduce operational costs and improve performance in applications such as combined heat and power systems, industrial power generation, underground gas storage, and gas pipelines. Its modular, space-saving design fits well in offshore installations where size and weight are critical factors.

the LM2500+ ensures continuous performance and maximizes uptime, making it a trusted solution for critical power needs across various industrial and offshore applications.

View Details

Multiprocess 301-SL Welder

Mechanical Tubing Perforator

Pumpjack C-320D-256-144 for application in the majority of oil wells

The Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit. These units are simple to operate and require minimum maintenance. Unit Size C-320D-256-144 A 120.00 B 180.00 C 260.00 E 215.25 F 353.75 H 398.00 I 32.75 J 110.00 L 72.50 M 76.00 N 21.13 N1 16.13 R 136.88 T 34.00 U 98.63 V 52.00 W 43.00 X 112.50 AA 53.625 AB 93.00 UU 31.00 VV 48.25 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, all brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. View Details

Helmet Strap with 5x Strap Hooks

Secure Your Lighting with the Wisdom Helmet Strap – Now at Provix Provix is proud to offer the Wisdom Helmet Strap with 5x Strap Hooks (model NWI-ZCZ073-SET5), an essential accessory for miners and construction workers. This helmet strap is specifically designed to provide a secure and reliable way to attach mining cap lamps to helmets, ensuring consistent illumination in challenging work environments. Designed for Convenience and Safety The Wisdom Helmet Strap is crafted with practicality in mind. It features five strap hooks that offer a firm grip, keeping your cap lamp securely attached to your helmet. This design not only ensures that your light source remains stable and positioned correctly but also enhances safety by preventing the lamp from becoming a distraction or hazard during work. Universal Compatibility Engineered for versatility, this helmet strap is compatible with a wide range of mining cap lamps. Whether you’re using a Wisdom lamp or another brand, the adjustable nature of the strap ensures a snug and secure fit, making it a universal solution for your lighting needs. Durable and Long-Lasting Constructed with high-quality materials, the Wisdom Helmet Strap is built to endure the rigors of mining and construction environments. Its durability ensures it can withstand daily wear and tear, providing reliable performance over time. Easy to Use and Adjust The helmet strap is designed for ease of use. The hooks can be easily attached to most safety helmets, and the adjustable strap allows for a comfortable fit, regardless of head size. This ease of use ensures that you can quickly set up your cap lamp and get to work without any hassle. Enhance Your Work Efficiency The Wisdom Helmet Strap is more than just an accessory; it’s a necessity for anyone who relies on helmet-mounted lighting. Its secure fit and durability make it an ideal choice for miners, construction workers, and other professionals who need reliable lighting solutions. Get Your Wisdom Helmet Strap Today Visit Provix to get your hands on the Wisdom Helmet Strap with 5x Strap Hooks. Enhance the functionality of your mining cap lamp and ensure a safe, illuminated work environment. Check out our website at www.provix.net for more information and to explore our wide range of mining equipment. View Details

Stand off Protector

Custom Gas Solutions

Custom Designed Gas Solutions: Your Partner in Customized Excellence with Lovat Gas Solutions At Lovat Gas Solutions, our approach is simple yet effective: we develop custom gas solutions that are specifically designed to meet the unique requirements of your application. As a service-oriented company, we are dedicated to delivering solutions that work seamlessly for your business. It is this commitment to excellence that sets us apart and earns us the loyalty of our valued customers. Why choose Lovat Gas Solutions for your custom gas needs? 1. Tailor-Made Solutions: We understand that your business has distinct requirements and challenges. That's why we take a personalized approach to develop solutions that are specifically tailored to your application. Whether you need a gas supply solution, operational support, or a comprehensive project plan, we design and deliver the solution that perfectly fits your needs. 2. Customer-Centric Focus: Your satisfaction is our top priority. We value your partnership and strive to build long-lasting relationships based on trust and exceptional service. Our team of experts takes the time to listen to your needs, understand your goals, and work collaboratively to deliver the optimal solution for your business. 3. Service-Oriented Approach: Lovat Gas Solutions is committed to providing the highest level of service to our customers. From the initial consultation to ongoing support, we prioritize responsiveness, reliability, and open communication. Our dedicated team is always ready to address your questions, concerns, and evolving needs. 4. Proven Track Record: Our customers love working with us because we consistently deliver results. With a wealth of industry experience, our team has a proven track record of success in developing and implementing effective gas solutions across various sectors. We are confident that we can exceed your expectations and provide you with a solution that works seamlessly for your application. Choose Lovat Gas Solutions as your partner for custom gas solutions. Experience the difference of working with a company that is dedicated to developing tailored solutions that deliver optimal results for your business. Contact us today to discuss your specific needs, and let our experienced team design a custom gas solution that works for you. Together, we will achieve excellence and drive your success with Lovat Gas Solutions. View Details

5 1/2" Mech-1 Single Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

HDI 2000B Pressure Gauge System

The HDI 2000B Pressure Gauge System is a panel-mounted electronic device designed to measure and display high-pressure levels accurately in industrial and oilfield settings. It monitors pressures up to 20,000 psi with an accuracy of plus or minus 0.50 percent of full scale, making it suitable for critical applications where precise pressure monitoring is essential for safety and operational control.

The system consists of two main components: a digital gauge display and a remote pressure sensor connected by an interconnect cable. This design allows the sensor to be installed directly at the pressure source, such as a wellhead, pump, or manifold, while the display is mounted in a more accessible location for easy reading and monitoring.

The gauge features a six-inch liquid crystal display that combines a five-digit numeric readout with an analog bar graph composed of 101 segments. This clear and detailed display makes it easy to quickly understand both the exact pressure value and its trend, even in low-light or harsh environments. The display can be read from up to 35 feet away.

Power is supplied by a replaceable 3.6-volt battery designed to last between 12 and 18 months under continuous operation. Calibration and configuration data are stored in memory that does not require power, ensuring settings remain intact even when the battery is replaced or the system is powered off.

The pressure sensor employs strain gauge technology and is compatible with a wide range of connection types including standard pipe threads and flanges. This allows the system to be used across various equipment and pressure ranges, while simplifying maintenance by enabling cross-compatibility of sensors.

Optional analog outputs provide 4–20 mA or 0–1 volt signals to connect the gauge to control systems, data loggers, or remote displays. This supports centralized monitoring and integration with automated process control.

In oil and gas operations, the 2000B system is commonly used to monitor pressure at wellheads to ensure safe extraction pressures, on pumps to maintain correct fluid flow and prevent overpressure damage, and on manifolds to track pressure differentials between flow lines. Accurate, real-time pressure data from this system helps operators detect anomalies early, avoid equipment failure, and optimize production rates while maintaining safe operating conditions. Its robust design and modular installation make it well-suited for harsh field environments where reliability and ease of maintenance are critical.

View Details

9 5/8" Hydraulic Set Large Bore Retrievable Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for 9 5/8” Casing

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer engineered for 9 5/8” casing, providing enhanced flow capacity and efficient wellbore isolation for production, injection, and zonal isolation applications. Designed to maximize flow efficiency while maintaining well integrity, this packer is set hydraulically by applying tubing pressure, eliminating the need for mechanical tubing manipulation. The expanded internal diameter minimizes flow restrictions, making it an ideal solution for high-rate production and injection wells. Once set, the multiple packing element systemensures a mechanically locked, long-lasting seal, maintaining pack-off force throughout its operational life.

To prevent movement under differential pressure, the hydraulic hold-down pistons engage after setting, while the body lock ring secures the setting force, ensuring bottom-hole pressure variations or tubing contraction do not affect the seal. The large bore design allows for unrestricted flow paths, improving overall reservoir performance and artificial lift system efficiency. This makes it particularly valuable in ESP, gas lift, and other high-flow applications, where maintaining maximum production rates is critical.

For retrieval, operators can use a straight upward pull or an optional right-hand rotational release for controlled removal, reducing the risk of stuck tools and minimizing intervention time. With its high-capacity flow path, secure hydraulic setting, and efficient retrievability, the HPL-1 packer for 9 5/8” casing is an optimal solution for operators looking to enhance well performance, reduce pressure losses, and maintain long-term well integrity.

View Details

Newton Grabber ROV Manipulator

Unleash the Power of Precision: The Newton Grabber by Poseidon Robotics At Poseidon Robotics, we're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need Poseidon Robotics prioritizes simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Poseidon Robotics Quality As pioneers in subsea robotics, Poseidon Robotics consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration with Poseidon Robotics. View Details

HDI Gauge Batteries, Parts, and Repair Kits

HDI Gauge systems used in oil and gas operations are often exposed to harsh environments and continuous use. To maintain accuracy, reduce downtime, and extend the service life of these systems, it is critical to have access to replacement components that are both durable and compatible. A full range of spare parts is available to support maintenance needs, including displays, sensors, cables, processor boards, connectors, and housing elements.

These parts are designed to be interchangeable across compatible models, allowing operators to replace worn or damaged components without requiring full system replacement. This modularity improves cost efficiency and simplifies logistics, especially in remote field locations. Most components are field-replaceable, reducing the need for specialized service technicians and enabling faster return to operation.

Processor boards and display units typically share a common design across multiple gauge models, streamlining inventory requirements and providing flexibility during urgent repairs. Sensors are matched with gauge heads for calibration accuracy but can be easily re-paired and recalibrated in the field or through service support if needed.

Using certified or manufacturer-specified replacement components ensures continued compliance with safety standards, maintains the expected measurement accuracy, and supports the longevity of the equipment. These parts are often backed by service documentation or part tracking for maintenance records and equipment history management.

In short, a well-organized supply of compatible, high-quality parts is essential for effective pressure and temperature gauge system upkeep in demanding industrial settings.

View Details

Solar Charge Controller

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue View Details

Bomb Hanger Running Tool

Elevate Your Downhole Operations with HOCA Oil Tools' Bomb Hanger Running Tools In the intricate and demanding environment of downhole operations within the oil and gas industry, precision, reliability, and safety are paramount. HOCA Oil Tools, a leader in innovative downhole slick line tools, presents its Bomb Hanger Running Tools, specifically designed to enhance the deployment and retrieval of downhole gauges and instruments, commonly referred to as "bombs" in the industry. These specialized tools are critical for ensuring the accurate collection of downhole data, a vital aspect of well diagnostics and optimization. HOCA's Bomb Hanger Running Tools: Precision at Every Depth The Bomb Hanger Running Tools from HOCA Oil Tools are engineered to facilitate the secure placement and retrieval of downhole pressure and temperature recording devices. Designed with precision and manufactured from high-grade materials, these tools stand up to the rigors of the downhole environment, ensuring that critical data collection devices are accurately positioned within the wellbore for optimal performance and data integrity. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are dedicated to advancing the capabilities of the oil and gas industry through our innovative and reliable downhole solutions. Our Bomb Hanger Running Tools epitomize this dedication, offering a solution that not only meets but exceeds the demanding requirements of modern well diagnostics. Incorporating our Bomb Hanger Running Tools into your downhole toolkit is a step towards enhanced operational efficiency, accuracy, and safety. With HOCA Oil Tools, you gain more than a product; you acquire a partner committed to your success, providing advanced solutions and expert service tailored to your unique downhole challenges. Choose HOCA Oil Tools for your Bomb Hanger Running Tool needs and elevate your downhole operations to new levels of efficiency and accuracy. Partner with us and unlock the full potential of your well diagnostics and optimization efforts. With HOCA Oil Tools, you're investing in more than just equipment; you're investing in the future of your downhole operations. View Details

T5.4 Thermocouple for LM2500

The T5.4 thermocouple is a temperature-sensing probe used in LM2500 gas turbines to measure exhaust gas temperature (EGT). The label T5.4 refers to its specific position in the turbine\'s exhaust thermocouple array—zone T5 (turbine exhaust), sensor 4. These sensors are part of a system that monitors thermal conditions at multiple points in the exhaust stream.

This thermocouple operates in high-temperature environments, withstanding continuous exposure up to approximately 1100°C. It is built to maintain accuracy and reliability under the thermal stress and vibration typical in gas turbine applications.

T5.4 thermocouples are often used with flexible

harness systems. This allows operators to replace individual probes without removing the entire harness, improving maintenance efficiency and reducing downtime.

By providing real-time exhaust temperature data, the T5.4 thermocouple supports engine control, performance optimization, and safety monitoring in industrial gas turbine operations.

View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Mini Hydraulic Power Unit

Empowering Your ROV: Introducing Poseidon Robotics' Mini-HPU (Hydraulic Power Unit) At Poseidon Robotics, we are committed to pushing the boundaries of subsea exploration and ensuring that your ROV missions are equipped with cutting-edge technology. Our latest innovation, the Mini-HPU (Hydraulic Power Unit), is designed to deliver unmatched power and reliability, elevating the capabilities of your hydraulic manipulators and tools on larger ROVs. Compact Powerhouse Don't let the size fool you! The Mini-HPU may be compact, but it packs a powerful punch. With a robust 3 horsepower output, this little dynamo is built to handle the most demanding subsea tasks with ease. The Mini-HPU provides the muscle you need to operate hydraulic manipulators and tools on larger ROVs effectively. Integrated Efficiency Efficiency is the name of the game, and the Mini-HPU excels in this aspect. Integrated within its sleek design is a convenient 1-gallon reservoir, ensuring an uninterrupted flow of hydraulic fluid to keep your operations running smoothly. No need to worry about external reservoirs, as everything you need is perfectly contained within this powerful unit. Adjustable Pressure Relief and Replaceable Filters We understand the importance of adaptability in your subsea operations. The Mini-HPU features an adjustable pressure relief valve, allowing you to fine-tune the pressure to suit your specific needs. Additionally, we've equipped this hydraulic power unit with easily replaceable filters, ensuring that your system stays clean and optimized for peak performance. Reliability at Its Core At Poseidon Robotics, we believe in building products that stand the test of time. The Mini-HPU is no exception. Its high reliability fixed displacement pump ensures consistent and dependable performance, allowing you to focus on your mission without worrying about equipment failures. Unleash Your ROV's Potential With a maximum pressure of 2,500 PSI and a maximum flow of 1.6 gallons per minute (standard pump), the Mini-HPU is a formidable force in the subsea realm. It's designed to tackle a wide range of applications, from deep-sea exploration to intricate industrial tasks. Corrosion-Resistant Design The subsea environment can be harsh and unforgiving, but the Mini-HPU is ready for the challenge. Our engineers have crafted the unit with anodized aluminum, providing exceptional corrosion resistance and eliminating the need for additional paint coatings. Your Trusted Subsea Partner Poseidon Robotics takes immense pride in being a trusted partner for subsea robotics and ROV companies worldwide. The Mini-HPU is a testament to our commitment to delivering advanced solutions that elevate your capabilities and redefine what's possible in the underwater world. Experience the Mini-HPU Difference Ready to take your ROV missions to new depths? Explore the power and versatility of Poseidon Robotics' Mini-HPU and unlock a world of possibilities for your subsea operations. Contact us today and witness the next level of subsea performance with the Mini-HPU by your side. View Details

Multiprocess 201 SLM

HP-3 Hydraulic Set High Angle 6 5/8" 28-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Flange of various sizes and specifications for use in industrial environments

Flange connections are one of the best options for pipe end connections that have bends that are subjected to very high lateral forces inclined to cause the loosening of the assembly. Flanges are used instead of welded connections to facilitate maintenance operations (a flanged joint can be dismantled quickly and conveniently). Upgrading threaded connections to flanged connections increases reliability and integrity while maintaining operational flexibility. View Details

7" Mech-2 Double Grip Mechanical Set Packer for 17-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

Storm Choke 2-1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

3.25 inch WI Valve

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Equipped Containers

Introducing Sivam's modified shipping containers - the perfect solution for anyone in need of a portable, efficient, and reliable office space that stands out from the crowd! Our secure modular offices are not your average office space - they're built from durable shipping containers that are modified to suit your needs. Whether you're looking for a portable site office or a unique office space that sets your business apart, Sivam's modified shipping containers are the perfect choice. Thanks to their portable design, our shipping container offices can be easily moved from site to site, giving you the flexibility to set up your office wherever you need it. And with our commitment to efficiency, you can trust that our offices are designed to maximize productivity and minimize wasted space. But don't let their unique design fool you - our shipping container offices are also incredibly secure. We understand the importance of protecting your valuable assets, which is why we build our offices to the highest security standards, giving you peace of mind that your equipment and documents are safe and secure. At Sivam, we pride ourselves on our commitment to quality and customer satisfaction. That's why we work closely with our clients to design and build offices that meet their exact needs, ensuring that every detail is taken care of. So if you're in need of a portable, efficient, and reliable office space that sets your business apart, choose Sivam's modified shipping containers. Contact us today to learn more about how we can help you take your business to the next level! View Details

Gas Turbine LM2500+ DLE 50Hz 2x CC

The LM2500+ DLE 50Hz Combined Cycle 2x1 system combines two LM2500+ dry low emissions gas turbines, each coupled with a Heat Recovery Steam Generator (HRSG), to power a single steam turbine. This high-efficiency configuration is engineered to meet larger capacity needs, delivering reliable, low-emission power with rapid startup capability.

At the core of this system is the LM2500+, an uprated version of the LM2500, featuring a 17-stage compressor. The addition of a forward-stage blisk increases airflow by approximately 20% at full power. This enhancement boosts the compressor pressure ratio from 18:1 to 23.1:1, contributing to higher overall efficiency and output.

Downstream of the compressor, the engine incorporates a fully annular combustor with externally mounted fuel nozzles, a two-stage air-cooled high-pressure turbine driving the compressor and gearbox, and a six-stage low-pressure power turbine aerodynamically coupled to extract energy from the high-energy exhaust flow. To accommodate the increased output, key design changes were made to the power turbine, including aerodynamic blade optimizations and rotor strengthening.

The Dry Low Emissions (DLE) system plays a crucial role in minimizing environmental impact. Its triple annular combustor lowers flame temperature, reducing NOx and CO emissions without water or steam injection—improving both thermal efficiency and maintainability.

Together, this 2x1 configuration offers a scalable solution for utility and industrial operators seeking clean, efficient, and dependable power generation at higher capacities.

View Details

Injection Well Subsurface Safety Valve WI 4.89

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Surface Heater

Valve and Prong Type Equalizing Sub-Assembly

Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry. View Details

Surface Controlled Subsurface Safety Valve NE 2-3/8

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

Ambient Valve 3 1/2 inch H

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Double Insulated AWG 2/0 Cable

Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. View Details

OCTG Casing from 4 inch to 36 inch for oil and gas well completions

OCTG (Oil Country Tubular Goods) refers to the piping products that are used in oil and gas production and drilling activities. OCTG pipe normally is manufactured based on API specifications. Oil country tubular goods (OCTG) is a family of seamless rolled products consisting of drill pipe, casing and tubing subjected to loading conditions according to their specific application. Casing is the pipe placed in the well that is not exposed to flowing fluids from the reservoir to surface. It is cemented in place and provides strength and stability to the drilled borehole. Our international network of manufacturers and warehouses have almost all weights and grades in stock. View Details

Micro Hydro Turbine

A SIMPLE WATER-TO-WIRE SOLUTION This micro hydro solution is based on both proprietary designs in the turbine and drivetrain, and off-the-shelf components, to deliver a complete water-to-wire system. This solution is a self-contained module made of single or twin turbines, generators, electrical cabinet, and is connectable to BOP/Grid. They are assembled and mounted in a self-stabilized concrete structure requiring no civil works. The system power output is 480 V, 3-phase AC, 50 Hz & 60 Hz. This new, highly cost-effective, renewable energy solution, capable of capturing most of the untapped energy on your site, has many assets. Its performance levels have been tested both in laboratory and on site. Actual power rating and instantaneous output depend mainly on water velocity (>1 m/s). In our catalogue of product, we can select the best options to suit a particular site. This technology is scalable by equipping an existing canal with dozens or hundreds of 5 to 15 kw modules. Land usage Turbines are installed on existing, untapped water infrastructures. No land planning is needed, with no modification required on existing assets. Predictable and available Permanent, predictable and controllable production with 95% availability. *information from manufacturer View Details

Knuckle Joint for Wireline Toolstring

Enhancing Wireline Flexibility with HOCA Oil Tools B.V.'s Advanced Knuckle Joints In the demanding environments of oil and gas extraction, the adaptability and precision of downhole tools are paramount. At HOCA Oil Tools B.V., we specialize in providing state-of-the-art wireline solutions, including our wide range of Knuckle Joints, known for their exceptional flexibility and reliability. Our Knuckle Joints are designed to provide pivotal flexibility in the Wireline Tool String, facilitating angular movement between the tool string and the running or pulling tool, an essential feature for navigating complex downhole geometries. Six Key Benefits of HOCA's Wireline Knuckle Joints: Enhanced Flexibility: Our Knuckle Joints allow for angular movement, enabling the Wireline Tool String to navigate through deviated wellbores efficiently. Improved Tool Placement: By enabling better maneuverability, our Knuckle Joints facilitate precise tool placement, improving the success rates of downhole operations. Increased Operational Range: The added flexibility extends the operational range of wireline tools, allowing for more complex and challenging interventions. Robust Design: Constructed with high-quality materials, our Knuckle Joints withstand harsh downhole environments, ensuring longevity and reliability. Versatile Application: Suitable for a variety of downhole activities, our Knuckle Joints are essential for both standard operations and complex well interventions. Easy Integration: Available with both Threaded and QLS Connections, our Knuckle Joints seamlessly integrate into existing tool strings, enhancing operational efficiency. HOCA's Diverse Array of Wireline Knuckle Joints: Type ‘AO’ Knuckle Joints (Threaded Connection): These are available in sizes from 3/8” to 2 1/2”, designed for easy integration with various tool strings. They offer exceptional flexibility and strength, with sizes accommodating different operational needs, ensuring that tools can navigate wellbore paths effectively. Type ‘AD’ Knuckle Joints (QLS Connection): Catering to advanced operational requirements, these Knuckle Joints provide the same high-level flexibility with quick lock-and-seal connections for faster deployment and retrieval, available in sizes ranging from 1 1/2” to 2 1/2”. Rebco Type ‘AS’ Knuckle Joint (RQLS Connection): An addition to our lineup, offering enhanced swivel action and compatibility with a range of wireline tools, facilitating seamless downhole operations. Each of our Knuckle Joints is engineered with precision, incorporating features such as double fishing necks for increased adaptability and operational safety. The diverse sizes and connection types we offer ensure that there is a HOCA Knuckle Joint suitable for every downhole challenge. By choosing HOCA Oil Tools B.V. for your wireline operational needs, you are selecting a partner dedicated to innovation, quality, and customer service. Our Knuckle Joints represent just one aspect of our commitment to providing the oil and gas industry with tools that meet the highest standards of performance, reliability, and safety. Embrace the flexibility and efficiency of HOCA’s Wireline Knuckle Joints to enhance your downhole operations. Contact us today to learn more about how our tools can transform your well interventions and streamline your operational workflows View Details

Tracked-hoe Excavator of various sizes and brands available to fit your needs

Excavators contain four major pieces - a boom, dipper, bucket, and cab, all of which are located on a rotating platform known as the house. Excavators are versatile pieces of equipment that can be used in the following applications (to name just a few); Digging trenches, holes, and foundations Demolition with hydraulic claws, cutters, and breaker attachments Mining, especially, but not only open-pit mining Driving piles, in conjunction with a pile driver Dredging rivers Drilling shafts and rock blasting Snow removal with snowplow and snow blower attachments Forestry mulching Handling materials Brush cutting with saws and mower attachments General landscaping Forestry work Construction View Details

Plug with Removable Mandrel

MS-201 Multistage Steam Turbine

Elevate Your Operations with the Kessels MS-201 Multistage Steam Turbine: Unmatched Power and Efficiency In the ever-evolving world of the oil and gas industry, precision and performance are paramount. At Kessels Steam Turbines, we're proud to introduce the MS-201 Multistage Steam Turbine, an engineering marvel that redefines excellence in steam turbine technology. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and our MS-201 Multistage Steam Turbine takes them to an entirely new level. Available in both single-stage and multi-stage configurations, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency That Sets a New Standard At the heart of the MS-201 Multistage Steam Turbine lies the essence of back pressure turbines – the straight-back pressure design. This innovation ensures the seamless utilization of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Boundaries Our MS-201 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-201 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-201 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Beyond Question: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-201 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

5" Mech-1 Single Grip Mechanical Set Packer for 15-16 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Shear Down Pulling Tools for External Fishing Necks

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success. View Details

Split-Shot Explosive runs

Streamlining Pipe Recovery: Introducing InWaTec Combined’s Innovative Split Shot Cutter Services When traditional methods fall short in the well servicing industry, innovation leads the way. InWaTec Combined is at the forefront of this innovation with our redesigned Split Shot Cutter Services, offering a superior alternative where conventional jet cutters cannot perform or are unsuitable. Our focus on customer-centric design and operational efficiency sets a new standard in pipe recovery solutions. The reinvented Split Shot Cutter encapsulates our commitment to ease of use and safety, allowing for straightforward electrical arming prior to loading the explosive segments. This feature not only enhances safety by simplifying the preparation process but also significantly reduces the time required to get the cutter downhole and ready for action. Our Split Shot Cutters are engineered for precision and reliability, designed to tackle the most challenging scenarios in pipe recovery. Their unique linear configuration enables the cutter to be placed precisely next to the collar or connection. Secured by robust inline magnets, the cutter ensures optimal positioning for a clean and targeted operation. Once detonated, the Split Shot Cutter works its magic, cleanly splitting the collar or connection. This critical action breaks the grip on the pipe, allowing for the straightforward extraction of the stuck sections. The result is a liberated wellbore, cleared of obstructions with minimal fuss and downtime. InWaTec Combined’s Split Shot Cutter Services are not just a tool but a transformative solution for well intervention. The technology is a testament to our innovative spirit and dedication to providing our clients with the most advanced and effective recovery methods available. Our cutters don’t just cut; they redefine the recovery process, offering unparalleled efficiency and effectiveness. Choosing InWaTec Combined's Split Shot Cutter Services means partnering with a company that prioritizes your operational success and safety. With our advanced technology and expert support, you can trust that even the most stubborn pipe recovery challenges will be met with a swift and satisfactory resolution. Experience the next level of pipe recovery services with InWaTec Combined, where we split the difference between complication and solution. View Details

Seismic Sensors for Subsea

Unveiling the Depths of Earth's Secrets: Poseidon Robotics' Seismic Sensors for Subsea Exploration At Poseidon Robotics, we are dedicated to unlocking the mysteries of the underwater world and empowering the subsea exploration community with cutting-edge technology. Today, we are proud to introduce our latest innovation - Seismic Sensors for Subsea. These advanced sensors are engineered to delve into the very heart of the ocean floor, bringing you invaluable data for seismic analysis and geological studies. Understanding Earth's Subsurface like Never Before Seismic exploration plays a pivotal role in comprehending the Earth's structure and its dynamic processes. Poseidon Robotics' Seismic Sensors for Subsea open up a whole new realm of possibilities, enabling you to gain unprecedented insights into the subsea environment. Whether you're involved in offshore oil and gas exploration, scientific research, or environmental monitoring, our sensors are designed to deliver accurate and reliable seismic data. Robust Design for Extreme Environments Operating in the harsh conditions of the subsea realm demands exceptional durability and reliability. Our Seismic Sensors are meticulously designed and built to withstand the pressures of the deep ocean and maintain optimal performance even in challenging environments. The rugged and robust construction ensures that the sensors can endure the rigors of subsea missions and deliver uninterrupted data acquisition. Seamless Integration with ROV Systems Efficiency is key in subsea exploration, and our Seismic Sensors are designed with that in mind. The sensors seamlessly integrate with your existing ROV system, eliminating any compatibility concerns and streamlining your operations. With easy installation and setup, you can swiftly deploy the sensors and start collecting valuable seismic data in no time. High-Precision Data Acquisition Accurate seismic data is crucial for making informed decisions and conducting thorough analyses. Poseidon Robotics' Seismic Sensors are equipped with state-of-the-art technology that ensures precise data acquisition. The sensors capture seismic waves with exceptional clarity, providing you with detailed information about subsurface structures and geological formations. Customized Solutions for Diverse Applications We understand that every subsea exploration project comes with its own set of challenges and requirements. That's why our team of experts works closely with you to tailor the Seismic Sensors to meet your specific needs. Whether you need sensors for deep-sea research or shallow-water surveys, we have the expertise to provide customized solutions that align with your objectives. Pioneering Subsea Innovation with Poseidon Robotics As leaders in subsea robotics, Poseidon Robotics continues to push the boundaries of exploration technology. With our Seismic Sensors for Subsea, we stand at the forefront of innovation, enabling scientists, researchers, and industry professionals to unravel the mysteries of the underwater world like never before. Explore the Depths of Knowledge Take your subsea exploration to new heights with Poseidon Robotics' Seismic Sensors. Discover the vast potential that lies beneath the ocean floor and gain the knowledge you need to make informed decisions in your field of study or industry. Contact Us Today Unleash the power of seismic exploration with Poseidon Robotics' Seismic Sensors for Subsea. Contact our team now to explore how our advanced technology can elevate your subsea missions and pave the way for groundbreaking discoveries. With Poseidon Robotics as your partner, the secrets of the deep ocean are within reach. View Details

HS Hydraulic set Packer

The HS™ is setting the standard for high-performance, single-string retrievable, hydraulic-set shear-release packers. Its simple and reliable design provides maximum pre-set prevention while running and has improved sealing and retrieving reliability, metallurgy and elastomer selections it for the well environment. Other applications include: production, injection and zonal isolation; single-string selective completions or dual-string completions with multiple packers; completions that require pre-set prevention while running; deviated wells or other applications when rotation for installation or removal is not beneicial; when it is beneicial to displace and set packers after the well is langed up. The HS-S™ is beneicial when testing the tubing string before packer setting or to independently set and test individual packers in multiple-packer completions and stacked packer applications. The HS-S is the selective-set version of the HS hydraulic-set single-string packer. Setting and retrieval is the same as the HS with the exception of an inner sleeve that must be shifted mechanically before the packer will set. The selective-setting mechanism prevents the packer from premature setting when high tubing-to annulus pressure differences are encountered or when tubing- pressure tests are performed. Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

Wisdom Cap Lamp KL12MS

Discover Unmatched Illumination with Wisdom's KL12MS Corded Miner's Cap Lamp from Provix Introducing the Wisdom KL12MS Corded Miner's Cap Lamp, a cutting-edge lighting solution for the mining industry, proudly offered by Provix. This lamp is specifically designed to meet the challenging demands of underground mining, providing exceptional illumination, safety, and durability. Exceptional Lighting Performance The KL12MS is equipped with a robust 14,000mAh battery, guaranteeing up to 13 hours of continuous operation. It features a high-powered main light LED with a working voltage of 3.0V, current of 1080mA, and power of 3.24W. This results in a remarkable luminous flux of 512 lm and an extraordinary lighting degree of 28,000 lx, ensuring unparalleled visibility in the darkest environments. Durability and Longevity Built to last, the KL12MS boasts a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery life extends up to 1,200 cycles under typical working conditions, emphasizing reliability and longevity. Prioritizing Safety Your safety is our priority. The KL12MS is designed with explosion-proof features, conforming to ATEX GROUP II standards, and an IP68 waterproof rating. Its short circuit protection time of less than 320 μs further enhances its safety credentials, making it a trustworthy companion in any mining operation. Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz), the KL12MS is comfortable for extended use. Its main cable length ranges from 1.4 to 1.65 meters (4.59 to 5.41 feet), offering flexibility and freedom of movement. The compact battery box, measuring 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), ensures the lamp is not cumbersome during long shifts. Efficient Charging Capabilities The lamp's rechargeable via USB feature provides convenient and efficient charging. It takes only 5.5 to 10 hours to charge, minimizing downtime and maximizing productivity. Get in Touch for More Information Upgrade to the Wisdom KL12MS Corded Miner's Cap Lamp for enhanced visibility, safety, and efficiency in your mining operations. Visit Provix at our location, call us, or email sales@provix.net for more details. Explore our range of products at www.provix.net and experience the future of mining illumination with the Wisdom KL12MS. View Details

Offshore Baskets

Attention all logistics managers and shipping professionals - if you're looking for a reliable and versatile solution for transporting and storing goods with unusual heights and dimensions, look no further than Sivam's Offshore Cargo Baskets! Our cargo baskets are designed to be flexible and adaptable, with lashing points that allow you to add tarps for added protection or simply use them as open tops. Thanks to their unique shape, these baskets can carry an unusually large weight for their size, making them the perfect choice for maximizing floor space and optimizing ease of use. At Sivam, we take safety and quality seriously, which is why our offshore baskets are DNV certified. You can trust that your goods will be safely stored and transported when you choose Sivam's Offshore Cargo Baskets. Our base in Italy means that we can serve clients all over the world, offering reliable and efficient shipping solutions no matter where you're located. We understand the importance of timely and dependable shipping, which is why we're committed to providing our customers with the best possible service. Don't settle for less when it comes to transporting and storing your valuable goods. Choose Sivam's Offshore Cargo Baskets and experience the difference in quality and convenience today! View Details

3” Tubing End Locator

The 3” Tubing End Locator is a mechanical downhole tool used to identify the precise end of a 3-inch production tubing string during well intervention operations. It provides a clear physical indication when the tool reaches the bottom of the tubing, helping to ensure accurate placement of equipment inside the well.

Designed specifically for tubing with a 3-inch outer diameter, the tool features a maximum outside diameter of 2.500 inches. This sizing ensures smooth movement within the tubing while maintaining close contact, allowing the tool to operate effectively without the risk of sticking or misalignment. At the core of the design is a spring-loaded finger mechanism that extends outward when the tubing end is reached. This mechanical movement is transmitted to the surface as a tactile response, signaling that the tubing bottom has been contacted.

The tool includes standard threaded connections—such as a 15/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—which makes it compatible with a variety of toolstring configurations. It can be easily incorporated into slickline, wireline, or coiled tubing assemblies without the need for special adapters.

Constructed from durable, corrosion-resistant materials, the tubing end locator is built to perform reliably in downhole environments that involve high pressure, elevated temperature, and exposure to fluids. Its fully mechanical operation ensures a high level of dependability and minimizes the need for maintenance, especially in conditions where electronic systems may not be suitable.

The 3” Tubing End Locator is a practical solution for confirming tubing depth when preparing the well for further intervention.

View Details