The Gauge Root Valve Male x Female with Lagging Extension is designed for controlling and isolating pressure instruments on pipelines where insulation is applied. The lagging extension allows the valve handle to extend above the insulation, ensuring operators can access and operate the valve safely without removing or damaging the insulation. This design maintains the integrity of the insulated pipeline while providing reliable valve operation.

The valve is manufactured to ASME B16.34 standards and meets ISO 9001, PED, and ATEX requirements, ensuring quality and compliance for industrial and oil and gas applications. It is rated for a standard working pressure of 6000 PSI and can be supplied for higher pressures upon request. The temperature range of the valve spans from -50°C to 230°C, with higher temperature options available with graphite sealing. A metal-to-metal body bonnet seal provides high-pressure and high-temperature sealing without the need for O-rings.

The valve features a back-seated stem for added security, a self-centering non-rotating tip for consistent shutoff, and a simple adjustable gland retainer for stable packing. The rolled stem threads and mirror-finished stem through the packing allow smooth operation, reduce packing wear, and provide long-lasting performance. The removable “T” handle and dust cap on the stem further enhance ease of use and protection.

This valve is particularly suitable for applications where pipelines are insulated, allowing for accurate gauge measurement, safe operation, and minimal disruption to insulation.

The Ball Valve Lever Operated – 2-Way Female × Female is a high-performance isolation valve designed for oil and gas piping systems where reliable flow control is essential.

Its female × female connections allow for secure inline installation directly onto male-threaded pipes or fittings, simplifying assembly, reducing the need for additional adapters, and minimizing potential leak points. This configuration is particularly useful in production lines, injection lines, sampling lines, and other pipelines with male-threaded ends.

The valve features a floating ball design that provides seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and efficient with a quarter-turn lever, allowing fast opening and closing with low torque. The internally loaded stem with shoulder prevents blowout, enhancing operational safety, while replaceable seats and packings extend service life. The maximum orifice design also minimizes pressure drop across the valve.

This valve is suitable for a wide range of oil and gas applications, including upstream, midstream, and downstream pipelines. It is factory tested to ensure leak-proof performance and can be supplied to meet NACE MR0175 standards and fire-safe requirements. Heat code traceability ensures quality and material verification for all components, making this valve a dependable and durable solution for industrial environments.

The 45° Elbow NPT Thread Tube Fitting is a specialized connector used to change the direction of flow in piping systems by 45 degrees. Manufactured to precise standards, it provides a strong, leak-resistant connection between tubes with NPT threads, ensuring consistent system performance. The fitting is suitable for use in oil, gas, and industrial process systems, where controlling flow direction and minimizing stress on tubing is critical.

Its design allows compact and efficient piping layouts, reducing the need for multiple fittings while maintaining smooth fluid flow. The fitting is machined to ensure tight tolerances, providing reliable sealing even under vibration, thermal expansion, or pressure fluctuations. Case-hardened threads improve durability, while the material selection ensures compatibility with common industrial fluids and gases.

Unique to this fitting is its ability to create a precise 45° angle connection without compromising the integrity of the tubing system, making it ideal for applications where space is limited or exact routing is required. Installation is straightforward: the tube is inserted into the fitting, and the NPT threads create a secure mechanical seal that resists leakage over extended operational periods.

The Gauge Root Valve Female x Female connection is designed to control and isolate pressure instruments in process systems, particularly in oil and gas applications. It is rated for a standard working pressure of 6000 PSI, with the option for higher pressures upon request.

The valve is type-tested to MSS-SP-99 and designed according to ASME B16.34 for pressure-temperature ratings, ensuring reliable performance under demanding conditions.

The valve features a metal-to-metal body and bonnet seal, providing high-pressure and temperature sealing without the need for O-rings. It can operate in temperatures from -50°C to 230°C, with graphite sealing available for applications up to 500°C. The stem has a backseat for added security, and a self-centering, non-rotating tip ensures consistent shutoff and leak-free performance.

The packing is located below the stem threads, isolating the threads from process media, and the gland retainer is easily adjustable for maximum packing stability. The valve includes a removable T-handle for low-torque operation and a dust cap to prevent contamination. All valves are factory-tested with nitrogen at 1000 PSI to verify seat and packing leakage, with a maximum allowable leak rate of 0.1 sec/min.

Materials can be supplied to meet NACE MR 01-75 standards, and heat code traceability is provided. Additional tests, including vibration, temperature, and helium, are available on request. This design ensures long-lasting, reliable operation while protecting connected instruments and maintaining safety in high-pressure systems.

This 2-way panel-mounted ball valve with Tube OD connections is designed to control, start, or stop fluid flow in oil and gas tubing systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or bypass lines.

The Tube OD connections allow direct attachment to tubing without additional fittings, simplifying installation and reducing potential leak points. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves are centralized or where physical access to the tubing is limited.

The valve features a floating ball design that ensures leak-proof shut-off under high-pressure conditions. Standard working pressure is 6000 PSI. It is designed and tested to ASME B16.34 for pressure-temperature ratings, and valve ratings follow ASME Process Piping Code B31.3. The valve has been type tested to MSS-SP-99 and offers a temperature range from –40 °F to 450 °F (–40 °C to 232 °C).

Operation is simple with a quarter-turn handle, providing fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Each valve is factory tested pneumatically with nitrogen gas at 1000 psig for seat and stem leakage, with a maximum allowable leak rate of 0.1 sec/min. Optional additional tests, such as vibration, temperature, and helium, are available.

The valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments. Heat code traceability ensures material verification and quality assurance.

The HDI 1000B Pressure Gauge System is an intrinsically safe, battery-powered, solid-state electronic pressure gauge designed for accurate and reliable pressure measurement in demanding industrial environments. It measures pressures ranging from 30 psi up to 20,000 psi with an accuracy of ±0.50% of full scale. The system features a durable design with no fluids or moving parts, reducing maintenance requirements and improving long-term reliability.

The gauge includes a clear liquid crystal display (LCD) that combines a five-digit numeric readout for precise pressure values with a 101-segment analog bar graph for quick trend visualization. The display is easily readable in various lighting conditions and includes a low battery indicator to ensure continuous operation.

The 1000B system is modular, comprising a gauge display, inline cable, and sensor assembly. This design allows the display to be positioned close to or remotely from the pressure measurement point, providing flexibility in installation. The system supports multiple connection types including 2” Male NPT, 2” 1502, 2” 2002/2202, or flanged connections to fit different piping standards.

Power is supplied by a replaceable internal 3.6 VDC battery pack, which typically lasts up to 18 months during continuous operation. The gauge system is designed to retain calibration and settings during battery changes or power interruptions, enhancing reliability in field use.

For integration with control systems, the 1000B offers optional 4-20 mA or 0-1 V outputs, enabling remote monitoring, data logging, or connection to PLCs and chart recorders. The system is built to withstand high vibration environments, making it suitable for offshore, drilling, and other heavy industrial applications.

Overall, the 1000B Pressure Gauge System provides a precise, low-maintenance, and versatile solution for pressure measurement needs where safety, accuracy, and durability are critical.

The Mini Needle Valve Series – Male x Female is designed for accurate and reliable flow control in small or compact piping systems. Its male-to-female connections allow easy integration into existing instrumentation or process lines. The valve ensures bubble-tight shut-off, preventing leaks in sensitive applications.

The rolled stem threads provide smooth operation, strength, and long service life, while the mirror-finished stem reduces friction, extends packing life, and ensures consistent performance. Packing located below the stem threads prevents lubricant washout, protects against corrosion, and keeps solids from entering the thread area, which could cause damage.

With low operating torque, these valves are easy to operate even in tight spaces. Optional panel-mount versions allow installation in control panels or instrument assemblies, making them ideal for oil and gas, chemical, and other industrial applications where precise flow control is essential.