The LM2500 is a multi-shaft gas turbine featuring a free-spinning power turbine, making it well-suited for dynamic and high-demand environments such as those found in oil and gas operations. In this design, the high-pressure turbine and compressor are mechanically independent from the low-pressure power turbine. This separation allows the power turbine, which drives the electric generator or mechanical load, to respond rapidly to changes in load demand. Its ability to accelerate quickly makes it ideal for applications where maintaining grid stability or mechanical output is critical. In scenarios where frequency fluctuations occur, the free power turbine can quickly compensate, helping to stabilize the grid and ensure smoother operation of all connected systems.

In its standard configuration, the LM2500 is equipped with a six-stage, low-speed power turbine. This turbine operates at a nominal speed of 3600 rpm and is designed to deliver reliable shaft power in steady-state conditions, making it particularly effective for electric power generation or mechanical drive in pipeline and process operations.

For applications requiring greater flexibility or higher continuous output speeds, the LM2500+G4 variant offers enhanced capabilities. It is available with either the standard six-stage, low-speed power turbine or an alternative two-stage high-speed power turbine. The high-speed variant is engineered for mechanical drive and other demanding industrial uses, with a design speed of 6100 rpm and an operating range from 3050 to 6400 rpm. This configuration supports continuous high-speed shaft output where needed and is particularly beneficial for compressors and other rotating equipment in oil and gas facilities.

Both the six-stage and two-stage power turbines can be operated over a cubic load curve, providing the adaptability required for variable load profiles commonly encountered in oil and gas operations. This flexibility, combined with the LM2500’s rapid response characteristics and modular design, makes it a dependable choice for critical infrastructure in upstream, midstream, and downstream sectors.

The Blowoff Valve is a 3-inch sleeve-style gas blowoff valve designed for use in aero-derivative industrial gas turbines. Its primary function is to isolate gas fuel during turbine shutdowns or emergency events, helping prevent overspeed conditions and damage caused by uncontrolled combustion.

This valve features a solenoid-pilot actuation system and operates with either 24 VDC or 95–140 VDC electrical input. It is designed with a 3-inch outlet flange and built entirely from stainless steel materials to ensure durability and compliance with NACE standards for sour gas environments.

Performance characteristics include a 110 millisecond full-stroke opening time and 1 second full-stroke closing time, meeting the rapid response requirements necessary for turbine protection. The valve is capable of withstanding heat soak temperatures up to 400°F, allowing it to function reliably in high-temperature turbine enclosures.

For safety in hazardous environments, the blowoff valve is certified to CE-ATEX Group IIA, Category 3, Zone 2, T3, supporting its use in oil and gas facilities with potentially explosive atmospheres.

This valve is often used in redundant pairs to provide dual isolation capability, increasing system reliability. Its application is critical to turbine safety systems, ensuring that fuel flow can be quickly and reliably shut off when required.

The LM2500 SAC Gas Turbine features a Single Annular Combustor (SAC) system—a type of combustion chamber where fuel and air are mixed and burned in a single, annular-shaped chamber. This design allows for efficient combustion with lower emissions and better fuel-air mixing. The turbine also supports dual-fuel capabilities, operating on both gas and diesel, offering greater flexibility in environments where fuel availability may vary.

Its open configuration is designed for accessibility, making maintenance tasks faster and more straightforward. This also allows for quicker engine removal or replacement, helping reduce downtime during service operations.

The LM2500 SAC is widely used across multiple industries, including electrical power generation, mechanical drive systems, and marine propulsion, due to its reliability, fuel flexibility, and proven performance in demanding conditions.

The LM2500XPRESS+G5 DLE UPT is a modular aeroderivative gas turbine system built for fast, flexible, and efficient power generation in both onshore and offshore environments. It is particularly well-suited for applications across LNG facilities, gas pipelines, gas processing plants, and general power generation, including electricity production at both 50 and 60 Hz, without the need for a speed reducer.

The "+G5" designation refers to its fifth-generation power turbine, offering the highest output and efficiency in the 20–40 MW class. It supports both high-speed and low-speed power turbine configurations, allowing integration into a variety of grid or mechanical drive systems.

At its core, the G5 includes a high-pressure compressor derived from the LM2500+G4, now redesigned for longer service life. In a simple cycle, it achieves up to 41% efficiency, which is notable for a turbine of this size class. The system can start from cold and reach load in about five minutes, making it ideal for rapid-response applications.

The unit is built for speed and simplicity. It’s shipped in preassembled modules, with a compact footprint that helps reduce installation time.

The Dry Low Emissions (DLE) system supports environmental compliance without requiring water or steam injection, simplifying operations and reducing resource demands.

Altogether, the LM2500XPRESS+G5 DLE UPT provides a practical solution for projects that need reliable, fast, and efficient power without a complex setup.

The LM2500+ gas turbine delivers increased power and improved efficiency by building on the proven LM2500 platform. Designed to meet the demanding needs of industrial and offshore operations, it offers a compact, reliable solution for power generation and mechanical drive applications.

The LM2500+ enhances the original LM2500 design by adding a 17-stage high-pressure axial compressor. This additional compressor stage increases airflow and raises the engine’s pressure ratio, resulting in roughly 20% more power output. The turbine uses a ring combustion chamber with advanced dry low emissions (DLE) technology, producing very low levels of NOx and CO emissions to meet strict environmental standards.

A key feature of the LM2500+ is its low-speed turbine section, which is specifically designed for offshore platforms and other space-restricted environments. This turbine’s compact size and modular design allow for easy maintenance, with split compressor casing and in-place blade replacement that reduce downtime and operational complexity. The turbine is factory-tested and pre-wired for straightforward installation, supporting both 50 Hz and 60 Hz power generation without the need for additional equipment like reducers.

Operators benefit from the LM2500+’s enhanced power and fuel efficiency, which help reduce operational costs and improve performance in applications such as combined heat and power systems, industrial power generation, underground gas storage, and gas pipelines. Its modular, space-saving design fits well in offshore installations where size and weight are critical factors.

the LM2500+ ensures continuous performance and maximizes uptime, making it a trusted solution for critical power needs across various industrial and offshore applications.

The 2″ Gas Metering Valve is designed to precisely control the flow of gas fuel in aero-derivative gas turbines, including the LM2500. By adjusting fuel delivery based on operating conditions, it maintains the optimal fuel-to-air ratio essential for safe, efficient, and reliable turbine operation.

Fuel metering valves act as the throttle control for gas turbines. Since turbines generate power by burning fuel mixed with compressed air, accurate regulation of this mixture directly impacts power output, efficiency, and emissions such as nitrogen oxides (NOx) and carbon monoxide (CO).

This valve delivers exceptional accuracy within ±1% of the flow point, ensuring consistent fuel delivery and optimal combustion. It is built to perform reliably in demanding environments and meets safety standards including ATEX, PED, and UL, certifying it for use in hazardous and extreme conditions.

The fuel metering valve is a two-inch right-angle style valve commonly used on aero-derivative turbines. It integrates easily into existing systems without requiring hydraulic or electrical changes. With millions of hours of proven field performance, it offers dependable, precise fuel control that enhances turbine efficiency and reduces fuel consumption.