Ballycatter.ca - Industrial Equipment

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

LM2500 Exhaust

The LM2500 exhaust system is an essential part of the LM2500 gas turbine, designed to handle the hot gases produced during turbine operation. Made from high-quality stainless steel, it is built to withstand extreme temperatures and harsh conditions, ensuring long-lasting durability.

The main purpose of the exhaust system is to safely direct these hot gases away from the turbine while reducing back pressure. Back pressure is the resistance the turbine faces when pushing out exhaust gases—lower back pressure means the turbine can run more efficiently, producing more power with less stress on its components.

This exhaust system is carefully designed to match the specific needs of the LM2500 turbine, ensuring smooth and efficient gas flow. It often works together with silencers or emission controls to release gases safely into the atmosphere while meeting environmental standards.

You would look for a new or replacement LM2500 exhaust system when installing a new turbine, upgrading to improve performance, replacing worn or damaged parts, or meeting updated environmental regulations. Choosing the right exhaust system is crucial because it directly affects the turbine’s performance, reliability, and maintenance costs. A well-designed exhaust system helps keep the turbine running efficiently and reduces the chance of costly downtime—critical factors for operations in oil and gas industries where reliability and efficiency are vital.

View Details

Needle Valves Hex Body Series – Male x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Hex Body Series Male x Female are industrial valves designed for precise flow control in high-pressure systems. The hexagonal body allows for standard wrench access, facilitating installation and maintenance. Male and female NPT connections enable integration into various piping systems, commonly used in instrumentation, process control, and oil and gas applications.

These valves are manufactured according to ASME B16.34 standards and type-tested to MSS-SP-99. They have a standard working pressure of 6000 PSI, with options for higher pressures. The metal-to-metal body and bonnet seal provides reliable sealing under high pressure and temperature conditions. Materials can comply with NACE MR 01 75, and the valves operate over a temperature range of -50°C to 230°C, with graphite seals available up to 500°C.

Each valve undergoes factory testing for seat and packing leakage using nitrogen gas at 1000 PSI. The valves feature a back-seated stem, rolled threads, and a mirror-finished stem through the packing, ensuring consistent and smooth operation. The removable T-handle reduces torque requirements during operation, and a dust cap protects the stem threads. The hex body and male-female connections provide a standard interface for connection while maintaining secure and leak-resistant operation.

View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

ESP Disassembly Bench

Are you in need of a high-quality disassembly bench for the teardown and inspection of electric submersible pumps? Look no further than Sivam! We're proud to offer a range of disassembly benches that are specifically designed for the inspection and maintenance of ESP's. Our benches are built from the highest quality materials and are engineered to provide exceptional durability and reliability, ensuring that your team can work safely and efficiently. At Sivam, we understand the importance of precision and accuracy when it comes to maintaining critical equipment like ESP's. That's why our disassembly benches are designed to provide a stable and secure platform for teardown and inspection, with features like adjustable height for a level working surface to ensure maximum convenience and ease of use. But that's not all - our disassembly benches also come equipped with a range of additional features to help your team work more efficiently. From built-in cages to customizable work surfaces, our benches are designed with your team's needs in mind. At Sivam, we're committed to providing our customers with the highest level of quality and customer service. That's why we work closely with our clients to understand their specific needs and design benches that meet their exact specifications. So if you're in need of a high-quality disassembly bench for the inspection and maintenance of ESP's, choose Sivam. Contact us today to learn more about our products and services and to find out how we can help take your operations to the next level! View Details

Pipe Recovery

Ensuring Continuity with InWaTec Combined’s Electric Line Pipe Recovery Services In the dynamic arena of oil and gas extraction, the unexpected is the only constant. One of the most formidable challenges that can grind operations to a halt is the dreaded scenario of a stuck drill string. Recognizing the critical need for swift and effective resolution, InWaTec Combined offers specialized Electric Line Pipe Recovery Services, designed to address and rectify such downhole dilemmas. When a drill string becomes lodged downhole, it is not just an obstacle; it represents a halt in production, potential damage to resources, and a significant operational cost. InWaTec Combined's Electric Line Pipe Recovery Services are the answer to this industry-wide challenge. Our services employ advanced wireline technology, leveraging the power of electric lines to deliver targeted interventions that free the stuck pipe. Our approach to pipe recovery combines precision-engineered tools with real-time data transmission capabilities. This dual advantage enables our skilled operators to assess the situation accurately and execute recovery procedures with minimal risk to the wellbore or the environment. By integrating our electric line expertise with our pipe recovery operations, we ensure that your drill rig can return to its primary function with minimal downtime. The electric lines play a crucial role; they not only serve as a conduit for the necessary tools to navigate the wellbore but also provide a continuous stream of data back to the surface. This data is critical for making informed decisions during the recovery process, allowing for adjustments and interventions that are precise and situation-specific. At InWaTec Combined, we understand that time is of the essence in such operations. Our Electric Line Pipe Recovery Services are designed for rapid deployment and execution, ensuring that your operations can swiftly transition from a state of suspension to full productivity. Our commitment to innovation, safety, and efficiency is unwavering, as we strive to provide solutions that minimize operational disruptions and maintain the integrity of your wellbore. In the face of stuck pipe challenges, you can count on InWaTec Combined to deliver not just services, but solutions that propel your operations forward. Trust in our expertise to navigate the complexities of downhole recovery, ensuring that your operations remain resilient and robust, no matter what obstacles lie beneath. View Details

ESP Dual Grip 9 5/8" Packer

The Ballycatter Model WC-ESP Dual Grip 9 5/8” Packer is a robust hydraulic-set packerbuilt for large-bore ESP completions in 9 5/8” casing. Designed for high-volume production and injection applications, this packer features bi-directional barrel slips that anchor it against pressure fluctuations and tubing movement, ensuring stability and well integrity.

The pass-through cable section enables a secure electrical connection to the ESP below, maintaining operational efficiency in high-flow rate wellbores. Its durable single-mandrel construction and Acner Array Packing Element provide exceptional resistance to high temperatures and corrosive environments, making it an ideal choice for challenging downhole conditions.

The WC-ESP Dual Grip 9 5/8” Packer is set hydraulically by applying tubing pressure against a plugging device, mechanically locking the slips and sealing elements in place. Its dual-grip anchoring system enhances stability, making it particularly suited for large-bore completions with significant tubing expansion and contraction forces.

The straight pull retrieval mechanism allows for efficient removal and reduced intervention costs, ensuring minimal downtime and operational efficiency. Compatible with all major ESP cable pack-off systems, this packer provides high-performance isolation and superior sealing integrity in large-diameter wells.

View Details

WR-SCSSSV 7 inch FXE

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Needle Valves Integral Bonnet Series – Male x Female – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

View Details

Hydrostatic Bailer

Maximize Efficiency in Wellbore Clean-up with HOCA Oil Tools' Hydrostatic Bailers In the demanding world of oil and gas extraction, every operation demands precision, efficiency, and reliability. HOCA Oil Tools stands at the forefront of downhole solutions, offering innovative tools that redefine downhole operations. Among our acclaimed products is the Hydrostatic Bailer – a vital tool designed for effective wellbore clean-up and debris removal, ensuring operational integrity and minimizing downtime. Understanding the Hydrostatic Bailer The Hydrostatic Bailer, an essential component of our slick line tools range, is engineered to facilitate seamless debris removal from wellbores. Crafted with precision and made from high-grade materials, this tool is instrumental in maintaining clear, unobstructed wellbores, which is crucial for optimal production and operational safety. Employing the principles of hydrostatic pressure, the HOCA Hydrostatic Bailer removes sand, silt, and other obstructions with ease. Designed for versatility, it can be adapted to various well conditions and debris types, making it an indispensable tool for well operators and service companies alike. Elevate Your Wellbore Clean-up with HOCA Oil Tools At HOCA Oil Tools, we understand the complexities of downhole operations. Our commitment to innovation, quality, and customer satisfaction drives us to develop tools like the Hydrostatic Bailer, designed to address the real-world challenges faced by the oil and gas industry. Integrating HOCA’s Hydrostatic Bailers into your downhole operations not only optimizes well performance but also aligns with cost-effective and safe operational practices. As the industry evolves, rely on HOCA Oil Tools to provide the solutions that keep your operations running smoothly and efficiently. Experience the difference with HOCA’s Hydrostatic Bailers – your partner in achieving clear, productive, and safe wellbores. Trust HOCA Oil Tools for unparalleled downhole solutions that drive your operations forward. View Details

Scaffolding for onshore and offshore

Finish the job in any and all conditions since this product is weather-resistant and durable so you can enjoy it for many years to come. Each frame is sold separately. Note that the galvanized cross braces and aluminum platforms with plywood are not included. When assembled, this scaffold has a load capacity of up to 4,960 pounds. View Details

3-1/2 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Welder's Cart

Introducing the Canaweld Welder Cart for Single Phase Machines - Your Ultimate Welding Companion! When it comes to welding, having the right equipment at your fingertips is essential. That's why we've designed the Canaweld Welder Cart - a sturdy and reliable cart that will keep your single-phase machines organized and accessible at all times. With its thoughtful features and robust construction, this cart is the perfect addition to your welding setup. Built for Strength and Durability: The Canaweld Welder Cart is crafted with a strong steel construction that ensures it can handle the demands of the oil and gas industry. Its powder coat finish adds an extra layer of protection, making it resistant to wear and tear from daily use. Rest assured, this cart is built to last. Maximum Convenience, Minimum Effort: Moving your welding equipment has never been easier. The front caster wheels on our cart swivel a full 360 degrees, allowing for smooth and effortless turning. No more struggling to maneuver your machines - our cart does the work for you. Ample Storage Space: Organize your welding essentials with ease. The Canaweld Welder Cart features three-tier shelves thoughtfully designed to accommodate all your portable MIG welders, stick welders, plasma cutters, and necessary accessories. Plus, there's enough room for consumables and a gas cylinder, ensuring you have everything you need at your fingertips. Secure Your Equipment: Your safety is our priority. That's why we've equipped the cart with a chain to secure the gas tank firmly in place. Worried about keeping your cables and helmet tidy? The side hook provides a convenient storage solution for them, eliminating clutter and potential hazards. Unbeatable Dimensions: The Canaweld Welder Cart boasts spacious shelf dimensions that perfectly cater to your welding equipment: • Top Shelf: 18 X 11 X 1 inches • Middle Shelf: 15.5 X 11 X 1 inches • Lower Tray: 27.7 X 11.5 X 2 inches • Gas Bottle Space: 10.2 X 11.4 X 2 inches Ultimate Load Capacity: Our cart can handle the weight. With a load capacity of 110 lbs. (50 kg), you can trust that your valuable equipment is safe and secure while on the move. Efficiency Meets Style: The Canaweld Welder Cart is more than just a functional tool - it's a sleek and stylish addition to your welding setup. Its design not only optimizes your workflow but also adds a touch of professionalism to your workspace. Upgrade Your Welding Experience: Say goodbye to the hassle of transporting your welding equipment and embrace the convenience of the Canaweld Welder Cart. It's time to work smarter, not harder. Elevate your welding experience today with Canaweld - your trusted partner in welding solutions. View Details

HP-3 Hydraulic Set High Angle 7" 20-26 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

Stand off Protector

MIG/STICK 221 Welding Machine

Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level. View Details

S-KWIK Control Line and Cable Protector

Valve Manifolds 2 Valve Manifold R Type – Integral Mount 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The R Type 2 Valve Manifold Integral Mount 1/2” Female NPT is a compact and robust solution for connecting impulse lines directly to pressure transmitters or gauges. It features a simple two-valve arrangement that allows operators to block process pressure, safely bleed trapped pressure, and calibrate transmitters without the need for additional piping. This configuration ensures quick and efficient maintenance and reduces potential leak points.

Its integral mount design allows the manifold to be attached directly to the transmitter, eliminating the need for extra brackets or complex assemblies. This not only saves space but also provides a secure and stable connection, which is particularly useful in oil and gas applications where reliability under high-pressure conditions is critical.

The manifold is constructed with a metal-to-metal body and bonnet seal to handle pressures up to 6000 PSI, with higher pressure options available upon request. It is fully factory tested for seat and packing leakage, and materials can be supplied to meet NACE MR 01 75 standards. The R Type is suitable for a wide temperature range and is designed to provide smooth operation, long-term durability, and leak-free performance even in demanding field conditions.

View Details

BMS Versol M

Introducing BMS VerSol M: The Safe and Effective Solvent for Your Cleaning Needs Cleanstream is thrilled to introduce BMS VerSol M, a safer and more environmentally conscious alternative to harmful solvents such as methylene chloride, acetone, and MEK. Our product is a chemical solvent that provides exceptional cleaning performance while being much safer for the environment than traditional solvents that contain BTEX. BMS VerSol M is a green methylene chloride replacement that is perfect for those who are looking for a more sustainable and safer solution to their cleaning needs. BMS VerSol M is designed to clean corrosion inhibition and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our solvent is highly effective and provides a safer alternative to harmful chemicals like methylene chloride, acetone, and MEK. In addition, BMS VerSol M is a great replacement for BTEX solvents in well cleanup operations. With our product, you can achieve the same level of cleaning performance without any of the negative effects of traditional solvents. At Cleanstream, we are committed to creating a more sustainable future, and BMS VerSol M is just one of the many ways we are working towards that goal. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. So why wait? Make the switch to BMS VerSol M today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol M and start cleaning with confidence. View Details

Gauge Root Valve – Male x Female – 1/4” NPT – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Valve Male x Female 1/4” NPT is designed to provide reliable isolation and control for pressure measurement instruments in chemical, petrochemical, and oil and gas applications. It allows a secure connection between the process line and pressure gauges, ensuring accurate readings while preventing backflow and leakage. This size is commonly used where compact instrumentation connections are needed, offering precise control in tight piping configurations.

The valve is constructed and tested according to ASME B16.34 for pressure and temperature ratings and complies with ISO 9001, PED, and ATEX standards, confirming quality and suitability for use in hazardous or pressurized environments. It has a standard working pressure of 6000 PSI, with higher pressures available upon request. The metal-to-metal body and bonnet seal ensures high-pressure and temperature performance, and the self-centering, non-rotating stem tip provides consistent shutoff for leak-free operation.

Additional design features include a simple, adjustable gland retainer for stable packing, a back seat for added security, a removable T-handle for low torque operation, and a dust cap to protect the stem from contamination. All valves are 100% factory tested for seat and packing leakage using nitrogen gas at 1000 PSI, ensuring reliable performance. This valve is ideal for isolating and protecting pressure measurement instruments.

View Details

Marine Oil Only Absorbent Spill Kit 4.6-gallon Bag

The absorbent spill kit 4.6-gallon bag contains, 5 Pads 8’ x 11.5” 1 Sorbent Sock 3” x 4ft 1 Bilge 1 Pair Nitrile Gloves 1 Disposal Bag Part number: OH-OOS-BO Use for small spills inside boats and near boat launches. Using an Oil Only Absorbent Spill Kit in a 4.6-gallon bag highly recommended for marine environments. It ensures that you are equipped to address oil spills swiftly and effectively, protecting the marine environment and complying with regulations. 5 Pads 8’ x 11.5” This package includes five absorbent pads, each measuring 8 feet by 11.5 inches. These pads are made for effective liquid cleanup, offering versatility and practicality. These pads are suitable for quick and efficient absorption of liquids, including oils and hydrocarbons. Their compact size and absorbent properties make them an ideal solution for managing spills in diverse industrial, automotive, and emergency response scenarios. 1 Sorbent Sock 3” x 4ft This package comprises a single Sorbent Sock, measuring 3 inches in diameter and 4 feet in length. The sock is made for efficient containment and absorption of liquid spills, particularly oil-based substances. Its mouldable and adaptable nature allows it to conform to different surfaces, making it versatile for diverse spill response applications. Whether used as a standalone solution or as part of a spill kit, this Sorbent Sock provides a targeted and effective response to spills. 1 Bilge A specific component designed for managing bilge water in a marine setting. The bilge component includes absorbent materials tailored for addressing water contaminated with oil or other hydrocarbons in a boat's bilge. This ensures a comprehensive solution for various spill scenarios that might occur on a boat. 1 Pair Nitrile Gloves This package includes 1 pair of Nitrile Gloves, a crucial component of personal protective equipment. Nitrile gloves are essential personal protective equipment (PPE) designed to provide a barrier between the skin and potentially harmful substances, such as oil-based liquids, during spill response and cleanup activities. 1 Disposal Bag Includes 1 Disposal Bag, essential for the proper containment and disposal of used absorbent materials and contaminated items. Disposal Bag is employed to collect and safely contain used absorbent materials, contaminated items, or waste generated during spill cleanup. Proper sealing of the bags ensures that the contained materials can be transported and disposed of in accordance with environmental and regulatory standards. The absorbent spill kit in a 4.6-gallon bag is a complete package for marine use as it incorporates a range of components designed to address spills effectively and safely, whether they involve oil, fuel, or bilge water, ensuring a comprehensive and responsible spill response on boats and ships. View Details

Rod Pump of various diameters and stroke lengths to optimize oil production

Sucker rod pumping systems are the oldest and most widely used type of artificial lifting system for oil wells. Sucker-rod pumping is the most widely used artificial lift method for onshore oil wells. Sucker-rod strings transfer the motion from the driving machine on the wellhead to the downhole oil pump. Pump diagnoses are generally conducted through an interpretation of the pump dynamometer graph (pump card). View Details

LM2500XPRESS+G5 DLE UPT Gas Turbine

The LM2500XPRESS+G5 DLE UPT is a modular aeroderivative gas turbine system built for fast, flexible, and efficient power generation in both onshore and offshore environments. It is particularly well-suited for applications across LNG facilities, gas pipelines, gas processing plants, and general power generation, including electricity production at both 50 and 60 Hz, without the need for a speed reducer.

The "+G5" designation refers to its fifth-generation power turbine, offering the highest output and efficiency in the 20–40 MW class. It supports both high-speed and low-speed power turbine configurations, allowing integration into a variety of grid or mechanical drive systems.

At its core, the G5 includes a high-pressure compressor derived from the LM2500+G4, now redesigned for longer service life. In a simple cycle, it achieves up to 41% efficiency, which is notable for a turbine of this size class. The system can start from cold and reach load in about five minutes, making it ideal for rapid-response applications.

The unit is built for speed and simplicity. It’s shipped in preassembled modules, with a compact footprint that helps reduce installation time.

The Dry Low Emissions (DLE) system supports environmental compliance without requiring water or steam injection, simplifying operations and reducing resource demands.

Altogether, the LM2500XPRESS+G5 DLE UPT provides a practical solution for projects that need reliable, fast, and efficient power without a complex setup.

View Details

StimStixx MatrixStixx

Introducing the Revolutionary MatrixStixx by StimStixx Technologies - Unleash the Power of Pinpoint Accuracy! Are you ready for a groundbreaking advancement in well treatment technology? Look no further than the MatrixStixx by StimStixx Technologies. Our specially formulated product is designed to deliver heated acid vapor with unparalleled precision, revolutionizing the way you approach well stimulation. With an outer dimension of 3.625 inches, our MatrixStixx is compatible with various conveyance methods, including slickline, wireline, coil tubing, and tractor conveyance. This versatility ensures that you can seamlessly integrate our solution into your existing operations, maximizing efficiency and minimizing downtime. The true power of our product lies in the highly reactive nature of the heated acid vapor it delivers. As it interacts with contaminants and carbonate scale, it penetrates with increased effectiveness and establishes optimal contact with the formation. This enhanced penetration translates to superior results, allowing you to unlock the full potential of your wells. But the benefits don't end there. The heated acid vapor, thanks to its high reactivity and relatively low volume, quickly vaporizes and becomes fully spent down-hole. This eliminates the need for post-treatment clean-up or disposal, reducing the risk of spills at the surface and ensuring a hassle-free operation. Experience the confidence of knowing that no contaminated effluent remains, enabling you to focus on what matters most - the success of your well stimulation. With the MatrixStixx by StimStixx Technologies, you can wave goodbye to costly and time-consuming post-treatment procedures. Join the ranks of forward-thinking industry leaders who trust StimStixx Technologies to deliver unrivaled accuracy, efficiency, and environmental responsibility. Elevate your well treatment to new heights with the MatrixStixx - the future of precision well stimulation is here. View Details

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 15.5-20 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Cable Counter

I'm excited to share with you one of our innovative products that can greatly benefit your business. Our cable counters are designed to accurately measure material as it's threaded through the internal wheels, making it an essential tool for the oil industry. What sets our cable counters apart is their ability to add and subtract measurements, giving you precise readings of the amount of material that has been used or remaining. This feature not only saves you time but also ensures accuracy in your operations, which is crucial in the oil industry. Our cable counters are versatile and can be mounted on a pedestal or floor stand, making them easy to use and accessible for your team. This ensures that your operations run smoothly and efficiently. At Sivam, we take pride in our commitment to quality and durability. Our cable counters are built to withstand harsh environments and are made to last, giving you peace of mind and saving you money in the long run. Investing in our cable counters will give you a competitive edge in the oil industry, making your business more efficient and profitable. Contact us today to learn more about our products and how they can benefit your operations. View Details

Welding Cart (Single and Double Gas Bottle Variations)

Introducing the Canaweld TR4-D Series Welding Cart - Your Ultimate Welding Companion! Are you tired of welding carts that just don't meet your needs? Look no further - Canaweld's TR4-D Series is here to revolutionize your welding experience. Our design team has meticulously crafted a welding cart that addresses all the flaws and drawbacks of existing carts, giving you a product that is versatile, sturdy, and designed to cater to your specific requirements. Unmatched Versatility: The TR4-D Series welding cart is a true game-changer. It's compatible with a wide range of welding machines, including MIG, TIG, Stick, Plasma, Cooling Unit, and more. Plus, you have the flexibility to choose between the TR4-D1-1 Single Gas Bottle configuration or the TR4-D1-2 Double Gas Bottle configuration, depending on your needs. Need extra storage space? You can even opt for a version with a cabinet to keep all your welding helmets and personal items neatly organized. Smart Design for Easy Transport: Transporting your welding equipment has never been easier. The TR4-D Series welding cart boasts a lightweight yet robust construction that guarantees easy mobility. The excellent balance ensures smooth movement, even on slanted surfaces, making it perfect for use in the oil and gas industry's demanding conditions. Customizable to Fit Your Machines: We understand that every welding machine is unique, which is why the TR4-D Series offers a middle horizontal panel that can be adjusted to the height of different machines. With CNC machine precision manufacturing, assembly is a breeze, and the fixed nut system eliminates the need for time-consuming nut separation. Experience quick and accurate installation, allowing you to focus on what matters - welding! Safety and Security at the Core: Safety is paramount when it comes to welding equipment. The TR4-D Series welding cart comes equipped with belts, locks, and chains to keep your gas bottles and capsules securely in place. The added security lock ensures your machine stays safe during transport and storage. Smooth Maneuverability: Navigating through your welding workspace is effortless with the TR4-D Series welding cart. The front swivel casters with brakes, along with the 10-inch wheels at the back, allow for smooth and stable movement, even in tight spaces. Built to Last: We understand that durability is vital in the oil and gas industry. That's why the TR4-D Series welding cart features galvanized parts, providing enhanced protection against scratches and wear, ensuring it stands the test of time. Unparalleled Convenience: We've thought of everything to make your welding experience a breeze. The TR4-D1-2 Double-Gas-Bottle model even includes storage space for TIG ROD, brackets for hanging welding cables and power cords, and a TIG Torch and MIG GUN holder. Elevate Your Welding Experience: Don't settle for subpar welding carts that fail to meet your expectations. Upgrade to the Canaweld TR4-D Series Welding Cart and experience the ultimate in versatility, convenience, and durability. Take your welding to new heights with Canaweld - your trusted partner in welding excellence. View Details

HDI 3200 MGS Differential Monitoring System

The HDI 3200 MGS Differential Monitoring System is a battery-powered, stand-alone device designed to monitor critical pressures and temperature in Mud Gas Separator operations within oil and gas drilling environments. It measures and displays the differential pressure between the liquid seal and mud gas pressure, along with monitoring the mud temperature. These measurements are essential for maintaining safe and efficient separator function, ensuring proper gas-liquid separation, and preventing equipment damage or hazardous conditions.

The system uses accurate and reliable pressure and temperature gauges, with pressure readings displayed in 1 PSI increments. It supports alternate engineering units to meet user preferences or site requirements and provides a 4-20mA output for integration with local or remote monitoring and control systems.

The enclosure is made of a durable polycarbonate/PBT alloy that is impact-resistant and UV stabilized, suitable for harsh field conditions including exposure to sunlight, moisture, and rough handling. Its compact, modular design allows for easy installation and maintenance.

The 3200 MGS Differential Monitoring System is essential in drilling operations for continuously monitoring pressure differences and temperature within Mud Gas Separators. This helps ensure the separator is functioning correctly by preventing gas or liquid buildup that could lead to equipment damage or unsafe conditions. By providing real-time data, the system supports safer drilling processes, reduces downtime, and helps maintain optimal performance in challenging well conditions.

View Details

Depthstar SCSSSV 4.5 inch

The DepthStar® tubing-retrievable safety valve (TRSV) is a revolutionary concept in the realm of surface controlled subsurface safety valves. Unlike other TRSVs, the DepthStar valve functions completely independent of well pressure; therefore, it is able to operate at consistently low hydraulic pressures, making it an ideal solution for deepwater completions. Previously, solutions to wellbore isolation of the piston required additional seals and/or gas-charged chambers where their reliability is heavily dependent on elastomeric seals and the permanent, long-term containment of a dome charge. The DepthStar valve, through the use of a revolutionary magnetic coupler, allows for positioning the hydraulic actuator completely out of the tubing wellbore. By repositioning the hydraulic actuator outside the tubing wellbore, the DepthStar valve becomes the world’s first 100% metal-to-metal (MTM) safety valve that contains no moving seals within the tubing wellbore. This reduction in seals combined with an intrinsically simple design makes the DepthStar TRSV inherently reliable. The DepthStar TRSV operates with a low operating pressure, making it an ideal solution for deep-set applications. Features » No moving seals exposed to the tubing wellbore » 100% MTM sealing within the tubing wellbore » Less than 5,000-psi maximum valve opening capability regardless of setting depth or pressure » Minimized number of body connections » Proven MTM, non-elastomer hydraulic actuator » Isolated flow tube *information referenced from supplier catalog. View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

ROV Transport Case

Secure Your ROV with the Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. We understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always Safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. Years of Experience With years of experience in subsea robotics and ROV technology. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection. View Details

Gas Metering Valve 2"

The 2″ Gas Metering Valve is designed to precisely control the flow of gas fuel in aero-derivative gas turbines, including the LM2500. By adjusting fuel delivery based on operating conditions, it maintains the optimal fuel-to-air ratio essential for safe, efficient, and reliable turbine operation.

Fuel metering valves act as the throttle control for gas turbines. Since turbines generate power by burning fuel mixed with compressed air, accurate regulation of this mixture directly impacts power output, efficiency, and emissions such as nitrogen oxides (NOx) and carbon monoxide (CO).

This valve delivers exceptional accuracy within ±1% of the flow point, ensuring consistent fuel delivery and optimal combustion. It is built to perform reliably in demanding environments and meets safety standards including ATEX, PED, and UL, certifying it for use in hazardous and extreme conditions.

The fuel metering valve is a two-inch right-angle style valve commonly used on aero-derivative turbines. It integrates easily into existing systems without requiring hydraulic or electrical changes. With millions of hours of proven field performance, it offers dependable, precise fuel control that enhances turbine efficiency and reduces fuel consumption.

View Details

Check Valve Poppet Type – Tube Ends 1/4" NPT – 6000 PSI – ISO 9001

The Check Valve Poppet Type with 1/4" NPT tube ends is a compact, high-performance valve designed to provide reliable one-way flow control in hydraulic and pneumatic systems. Built for demanding applications, this valve is rated up to 6000 PSI working pressure, making it suitable for both high-pressure and industrial environments.

The poppet design ensures a tight seal when backflow occurs, preventing fluid from moving in the reverse direction while allowing free flow in the intended direction. This not only protects sensitive system components but also maintains system efficiency by eliminating leakage.

With a cracking pressure typically available from 1 to 25 psi, the valve can be selected to suit specific operational needs, ensuring smooth opening without unnecessary resistance. The female NPT tube end connection provides a secure, leak-free fit, compatible with a wide range of standard piping and tubing systems. Constructed from durable stainless steel or carbon steel depending on configuration, the valve offers excellent resistance to wear, corrosion, and high-pressure fatigue.

Commonly used in oil and gas, the poppet-type check valve provides consistent performance, low maintenance requirements, and long service life.

Its simple yet effective design ensures operators can trust it in critical applications where preventing reverse flow is essential for safety and operational reliability.

View Details

Wisdom Lamp KL5MS

Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations. View Details

Double Block & Bleed Valve – Flange x Thread – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block and Bleed Valve with Flange x Thread connections and Ball x Ball isolation with Needle Drain is a compact assembly designed to provide dual isolation in oil and gas systems. The two ball valves ensure reliable upstream and downstream shutoff, while the needle drain allows controlled venting, sampling, or pressure release between the isolation points. This design reduces the number of flanged joints and potential leak paths, improving safety and reliability in instrument and process applications.

The valve is available in sizes from ½ inch to 2 inch and pressure classes from 150 to 2500, making it suitable for a wide range of process conditions. It can be manufactured in various materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, and can be supplied to meet NACE MR-01-75 requirements. The assembly is built to recognized standards including ASME B16.34, API 6D, and ISO 17292 and is tested to ensure proper operation, minimal leakage, and long service life.

This valve is ideal for instrument isolation, gauge protection, chemical injection, sampling connections, and other applications where safe and reliable dual isolation is required. Its compact and integrated design reduces installation complexity, simplifies system layout, and provides a safer and more efficient solution compared to assembling individual valves.

View Details

Drive Down Bailer

The Drive Down Bailer is used to collect samples or remove debris from the wellbore. The Bailer is jarred into the sample or debris forcing material into the cylinder, which is retained by a ball or flapper type non-return seat. The bailer is then jarred upwards and retrieved. Applications • Recovery of in-fill samples from wellbore or sump • Removal of compacted debris or sand from flow control devices View Details

FXE WR-SCSSSV 4-1/2 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

WellStar Tubing Retrievable Surface Controlled Subsurface Safety Valve 2-7/8 inch Halliburton

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details

Large Aluminum Jaws for ROV

Introducing Large Aluminum Jaws: Elevating Subsea Search and Rescue Operations We are proud to announce the launch of the latest innovation: the Large Aluminum Jaws. Designed to enhance the performance of the renowned Blue Robotics Newton Subsea Gripper, these jaws are set to revolutionize search and rescue (SAR) applications and beyond. Engineered for Performance The Large Aluminum Jaws have been meticulously engineered to deliver superior performance in grabbing larger objects underwater. Comparing our Aluminum model to the standard jaws, it becomes evident that we have achieved the perfect balance between strength, precision, and functionality. Precision and Durability Crafted from premium quality Aluminum (6061-T6), our jaws boast exceptional strength and durability. The hard anodized black finish further enhances their resilience, making them resilient to the harsh conditions of subsea operations. Precision flanged bushings ensure smooth and reliable operation, enabling operators to accomplish their tasks with confidence. Versatility Redefined While the Large Aluminum Jaws are designed primarily with search and rescue applications in mind, their versatility extends to various other tasks in subsea environments. Whether it's retrieving objects from the depths or handling delicate operations, these jaws offer unmatched adaptability and efficiency. Your Partner in Subsea Excellence Our commitment to providing the highest quality products is matched only by our dedication to unparalleled customer support. We are here to ensure that you make the most of your subsea operations with our cutting-edge solutions. Experience the Future of Subsea Grabbing Unlock a new era of efficiency and precision in search and rescue operations with Large Aluminum Jaws. Whether you are a SAR professional or involved in other subsea applications, these jaws will elevate your performance to new heights. Contact Us Today Contact us today to learn more about our Large Aluminum Jaws and explore how they can transform your subsea operations. Our team of experts is ready to assist you every step of the way. Embrace the future of subsea robotics. View Details

Toolbox for hand tool storage on industrial worksites

The usefulness of the tool box is unmatched as it provides safety, protection and easy access to tools. By storing your tools, you'll increase their working life. Storing your tools prevents them from collecting dust, grease, and rust. If you take care of your tools, they'll last longer and perform better. Storing your tools in a toolbox also allows you to save money, as you'll avoid having to replace damaged ones. Not to mention your tools won't "walk away" when you are not looking. View Details

Wireless Infrastructure Design and Implementation

Redefining Wireless Infrastructure for the Oil & Gas Sector: Nulux Network Solutions Leads the Way In the modern era of the oil and gas industry, the intricate operations and vast terrains involved necessitate a robust, efficient, and secure communication network. As reliance on digital solutions becomes more pronounced, so does the need for seamless wireless infrastructure. With Nulux Network Solutions at the helm of wireless infrastructure design and implementation, the oil and gas sector can now look forward to tailored solutions that guarantee optimum connectivity. Bridging Distances and Overcoming Obstacles Geographical distances, challenging terrains, and myriad obstacles are inherent to the oil and gas industry. In such scenarios, traditional hard-line connections might prove ineffective, expensive, or even impossible. This is where Nulux’s expertise in wireless communication links becomes invaluable. With a proven track record of designing and implementing both point-to-point and multipoint radio networks, along with tower construction, rigging, and mesh networks, Nulux offers unparalleled solutions that ensure constant, uninterrupted connectivity. Harnessing the Power of Wireless Access Points As workplaces in the oil and gas sector become more dynamic, the dependency on mobile devices for tasks such as documentation review, QA-QC, and project planning is intensifying. Recognizing this need, Nulux offers top-tier wireless network designs that ensure every corner of your facility, be it the office or the expansive facility floor, remains connected. This not only boosts productivity but also paves the way for substantial time and cost savings. Point-to-Point Vs. Multipoint: Customized Solutions for Diverse Needs Understanding the distinction between point-to-point and multipoint networks is vital. While the former establishes a dedicated link between two distinct points ensuring utmost security and streamlined communication, the latter connects multiple points through a single shared line, facilitating broad-spectrum connectivity. Key Benefits of Opting for Nulux’s Wireless Infrastructure: Boosted Productivity: Seamless connectivity ensures that all personnel, regardless of their location, have unhindered access to centralized data, thereby accelerating operations. Enhanced Security: The private nature of point-to-point networks shields data from potential interceptions, guaranteeing safe data transfers. Cost-Effective Solutions: Especially in scenarios where traditional hard-line installations are impractical, wireless networks present a more economical and feasible option. In conclusion, the sophisticated nature of operations in the oil and gas industry demands nothing short of excellence in communication infrastructure. With Nulux Network Solutions, engineering professionals can expect wireless infrastructure designs that are not only advanced and reliable but are also tailor-made for the unique challenges of the sector. As the industry evolves and the need for reliable wireless tech surges, Nulux remains steadfast in its commitment to stay ahead, ensuring that the oil and gas sector remains seamlessly connected, always. Connect with us today, and let's build the future of wireless communication together. View Details

9 5/8" Mech-2 Double Grip Mechanical Set Packer for 36-43.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

7" HP-6 Hydraulic Set High Angle Production Packer for 26-32 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 40-47 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

2 1/16" Coiled Tubing Hanger 5M Pressure Rated

The 2 1/16” 5M Coiled Tubing Hanger is designed to support coiled tubing strings in well intervention and completion work. With a 5,000 psi pressure rating, it’s well-suited for moderate to high-pressure wells, and its compact 2 1/16” size makes it ideal for smaller wellheads or space-constrained setups.

It handles tubing sizes up to 3 1/2” O.D. and is commonly used for cleanouts, stimulation, logging, and other coiled tubing operations. A built-in wireline entry sub helps guide tools into the tubing while providing an extra seal and preventing tubing movement—improving well control and operational safety.

The hanger is available with API 6B or 6BX flange connections and can include a side outlet if needed. It’s a reliable, field-proven choice for operations requiring strong support and safe access to coiled tubing tools.

View Details