Ballycatter.ca - Industrial Equipment

Copiers Leasing

Wireline Unit for Offshore

Designed for heavy duty use. Standard drum comes with a 20” core and capacity for 2 slicklines each 0.150” x 25,000 feet (7500 meters). Standard drive uses Sauer series 90 pump, motor (hydrostatic closed loop drive) and Funk 4 speed transmission with double 60 chain and sprockets to drum. Large speed range from 15 feet/min (5 m/min) through 2000+ feet/min (600 m/min) at mid-point of drum. Pulling capability designed to exceed break strength of slickline installed. Standard drum and drive can pull +7000 lbs (3000 kg) at mid-point of drum. Double bar front traverse spooler or overhead spooler. View Details

Wisdom EX Cap Lamp

LM2500+G4 SAC 50Hz SC Gas Turbine

The LM2500+G4 SAC 50Hz Simple Cycle is a fourth-generation aeroderivative gas turbine of the LM2500. Designed for industrial power applications, including those in the oil and gas sector, it delivers more output and greater thermal efficiency while retaining the ease of maintenance and high reliability the LM2500 series is known for.

In a simple cycle configuration, the gas turbine generates power directly by expanding hot gases through the turbine stages, without recovering heat for additional power generation. This design is favored for its simplicity, lower capital cost, faster start-up, and suitability for mobile or remote applications.

The LM2500+G4 improves upon its predecessor by increasing airflow and turbine cooling capacity, allowing for higher operating temperatures. These changes result in up to 40% thermal efficiency in simple cycle mode—an impressive figure for this class of turbine. This translates to improved fuel usage and reduced operational costs over time.

The engine features a Single Annular Combustor (SAC), which supports stable combustion with low emissions of nitrogen oxides (NOx) and carbon monoxide (CO). The combustor is also designed for durability and long life, with easily replaceable fuel nozzles and a thermal barrier coating for resistance to high temperatures and corrosion.

Its two-spool design means the engine has no cold start limitations, making it well-suited for harsh or variable environments. The power turbine and gas generator can be separated, allowing for easier in-module repairs and less downtime.

Overall, the LM2500+G4 SAC 50Hz Simple Cycle offers a balance of power, efficiency, and maintainability, making it an attractive solution for power generation and mechanical drive needs in industrial, onshore, and offshore oil and gas operations.

View Details

Coiled Tubing Knuckle Joint

Electrode Holder EH 401

Introducing Canaweld's Electrode Holder EH 401 - Power, Precision, and Durability in Your Hands! When it comes to welding, having the right tools in your hands can make all the difference. That's why Canaweld is proud to present the EH 401 Electrode Holder - a Canadian-designed, heavy-duty, and versatile tool that will elevate your welding experience to new heights. Designed to Perfection - Light Yet Heavy Duty: At Canaweld, we understand the importance of balance in welding equipment. The EH 401 Electrode Holder combines the best of both worlds - it is exceptionally light in weight for easy handling, yet built with the sturdiness and durability of premium copper and brass alloys. Weld with confidence, knowing that our Electrode Holder is engineered to withstand the toughest welding conditions. Meeting International Standards - Quality You Can Trust: Your safety is our top priority. That's why the EH 401 Electrode Holder has undergone rigorous testing according to international standards, including IEC 60974-11. It has passed all electrical, impact, insulation, and heating tests with flying colors, ensuring that you get a reliable and safe tool every time. Unleash the Power - 400 Amps at 35% Duty Cycle: When you need the power to handle heavy welding tasks, the EH 401 delivers. With a robust 400 Amps at 35% Duty Cycle in 104°F/40°C, this Electrode Holder is ready to tackle any challenge you throw its way. Whether you're working on pipelines, structural welding, or any oil and gas project, the EH 401 is your reliable companion. Built for Convenience - Easy Cable Connection and More: Welding should be seamless, and that's why we've designed the EH 401 with ease of use in mind. Its special design allows for quick and simple cable connection, making setup a breeze with the included free spanner. A copper bush ensures a secure and damage-free connection to the welding cable, enhancing electricity conductivity and extending the life of the connection. Flexible and Adaptable - Your Welding Ally: The EH 401 Electrode Holder offers a 6-position jaw pattern, allowing you to use it in 45, 90, or 180-degree positions. Versatility is key, and this holder provides the flexibility you need to achieve precise welding results, no matter the angle or position. Get Your Canaweld EH 401 Electrode Holder Today: With Canaweld's EH 401 Electrode Holder in your hands, welding becomes an art. Unlock the power, precision, and durability that our Canadian-designed holder brings to the table. Whether you're a seasoned professional or just starting on your welding journey, the EH 401 will be your trusted welding ally. Experience the Canaweld difference - Choose the EH 401 Electrode Holder and take your welding to the next level! View Details

3 1/16" Coiled Tubing Hanger 10M Pressure Rated

Coiled tubing is a continuous, flexible steel pipe widely used in well intervention and maintenance operations, allowing operators to clean, stimulate, log, or deploy tools inside the wellbore without shutting down production. This capability makes coiled tubing an efficient and cost-effective solution to maintain well health and improve productivity.

The 3 1/16” 10M Coiled Tubing Hanger is designed to support larger diameter coiled tubing and heavier tool strings required for more demanding or deeper well operations. The size “3 1/16”” refers to the wellhead bore size that the hanger fits into, while the “10M” indicates its pressure rating of 10,000 psi, meaning it is built to withstand high-pressure environments typically found in advanced well interventions.

This hanger is rated to maintain pressure containment during interventions in high-pressure wells, ensuring safe operations and protecting well integrity. It accommodates coiled tubing sizes ranging from 1 inch up to 1¾ inches outer diameter, which allows the deployment of heavier and more complex downhole tools needed for challenging well conditions. Its rugged construction is engineered to withstand mechanical stresses from heavy tool strings and high pressures without compromising performance.

Designed with flanged connections compatible with API 6B and 6BX standards, the hanger integrates seamlessly with existing wellhead equipment, simplifying installation and maintenance. An important feature of this model is the wireline entry sub, which guides wireline tools into the tubing bore, facilitating additional intervention tasks. The wireline entry sub also provides a secondary annulus seal that prevents fluid or gas leaks and restricts any upward movement of the tubing, enhancing operational safety.

The hanger maintains a secure secondary annulus seal around the tubing, which is critical for isolating pressure zones and protecting against leaks during live well operations. This versatility makes the hanger suitable for various well intervention activities such as well cleanouts, acidizing, logging, and tool deployment, particularly in situations where larger tubing and higher pressures are involved.

The 3 1/16” size strikes a balance between tubing size and wellhead bore capacity. It is larger than smaller hanger sizes, allowing operators to use coiled tubing capable of handling more demanding operational requirements. Its high-pressure rating ensures safe operation in wells where pressures can reach or exceed 10,000 psi, common in deeper or complex reservoirs.

View Details

NORM Decontamination Services

As the oil, gas, and geothermal industries continue to grow, the risk of contamination from Naturally Occurring Radioactive Material (NORM) also increases. That's why Cleanstream is proud to introduce our innovative, qualitative, and rapid cleaning services for Low Specific Activity (LSA) and NORM contamination. Our advanced cleaning methods comply with LSA/NORM regulations, ensuring safety for people and the environment. We invest heavily in new methods to continuously guarantee quality. Our own radiation experts, at Radiation Protection Expert (RPE) and Radiation Protection Officer (RPO) level, always carry out the decontamination and final release. At Cleanstream, we understand the importance of cleaning without damage. That's why we've developed our own inventive cleaning methods to prevent materials from getting damaged during the cleaning process. Our experienced employees have extensive knowledge of decontamination and are involved in disassembling and decontaminating contaminated materials originating from oil and gas wells so that the metal can be recycled. Our services are both rapid and cost-effective. Because all work activities are carried out by our own staff at our 20,000 m2 premises in Ter Apel, the communication lines and turnaround times are short, resulting in considerable cost-savings for our clients. Cleanstream is licensed to clean all types of NORM/LSA contaminated materials. Cleaned objects are released by means of a certificate, showing that your material has been cleaned in accordance with laws and regulations. At Cleanstream, we are committed to embracing change and constantly improving to meet the demand. Join us in our mission to promote safety, quality, and green solutions. Contact us today to experience our innovative and efficient cleaning services for NORM/LSA contaminated materials. View Details

Back Pressure Valve for Coiled Tubing

Introducing the BPV (Back Pressure Valve) from Marlin Oil Tools: The Essential Safety Barrier for Coiled Tubing Operations in the Oil and Gas Industry Marlin Oil Tools is proud to present our BPV (Back Pressure Valve), a paramount downhole tool designed to enhance safety and operational integrity during well intervention tasks. Engineered with precision and reliability, the BPV is an indispensable component for maintaining control over well pressure and ensuring the protection of coiled tubing (CT) from potential hazards. Here's a detailed look at the BPV's design, functionality, and benefits, making it a must-have tool for any oil and gas operation. Key Features of the BPV (Back Pressure Valve): Directional Fluid Flow Control: The BPV is designed to allow fluid flow exclusively in one direction—downwards. This capability is crucial for preventing backflow and maintaining operational control during well intervention processes. Dual Flapper Valve System: Equipped with two duplicate cartridges featuring reliable flapper valves, the BPV offers an enhanced level of safety and redundancy. This double flapper back pressure valve system ensures that even if one valve encounters an issue, the other can continue to function effectively, providing an uninterrupted safety barrier. Comprehensive Well Pressure Control: The primary function of the BPV is to act as a safety barrier, preventing well fluids from entering the coiled tubing through the bottom of the Bore Hole Assembly (BHA). This function is vital for the safety of operations and the preservation of equipment integrity. Protection Against Mechanical Particles and Aggressive Environments: In addition to controlling well pressure, the BPV serves an auxiliary role in protecting the coiled tubing from mechanical particles and potentially aggressive well environments, such as those containing H2S and CO2. These elements can cause significant damage to the CT if allowed entry, making the BPV's protective capability critical for long-term equipment durability. Essential Tool for Every Job: Given its crucial safety and protective functions, the BPV is typically run on each well intervention job, underscoring its importance in the toolkit of downhole operations. Elevate your well intervention safety and efficiency with the BPV (Back Pressure Valve) from Marlin Oil Tools, a leading solution in oil and gas coiled tubing tools. Designed for downhole applications, the BPV features a double flapper valve system to ensure fluid flows only downwards, creating an effective barrier against well pressure. This safety essential prevents well fluid backflow into the CT, offering protection from mechanical particles and harsh environments like H2S and CO2. With dual reliable cartridges, the BPV is a critical component for every well intervention job, safeguarding both personnel and equipment by maintaining operational integrity and preventing damage from aggressive well conditions. Why Choose the BPV from Marlin Oil Tools? Unparalleled Safety and Control: Provides a reliable safety barrier for well pressure control, crucial for operational safety. Dual Valve Redundancy: Ensures continued operation and safety even if one valve fails, thanks to its double flapper valve design. Comprehensive Protection: Guards coiled tubing against mechanical damage and corrosion from aggressive well environments. Operational Necessity: An indispensable tool for every well intervention job, highlighting its importance in maintaining a safe and efficient operation. The BPV (Back Pressure Valve) by Marlin Oil Tools represents the pinnacle of safety and efficiency in coiled tubing operations within the oil and gas industry. Incorporate the BPV into your operations to ensure the highest standards of safety and equipment integrity. Contact Marlin Oil Tools today to learn more about how our innovative solutions can support your operational needs. View Details

Sand Pump Bailer

Streamline Wellbore Cleanout with HOCA Oil Tools' Sand Pump Bailers In the fast-paced and ever-evolving oilfield industry, efficiency and reliability are paramount. HOCA Oil Tools, a leader in innovative downhole solutions, introduces the Sand Pump Bailer – a cutting-edge tool designed for the effective cleanout of sand, debris, and other obstructions from wellbores. This essential tool is part of our comprehensive range of downhole slick line tools, engineered to enhance the safety and efficiency of your operations. Innovative Solutions for Complex Challenges: The Sand Pump Bailer The HOCA Sand Pump Bailer is specifically designed to address the challenges associated with sand and debris accumulation in the wellbore. Utilizing a simple yet effective mechanism, it allows for the removal of obstructive materials, ensuring a clear path for production and extending the life of the well. Constructed with high-quality materials, the Sand Pump Bailer withstands the harsh downhole environment, delivering consistent performance and durability. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to delivering solutions that meet the unique needs of the oil and gas industry. Our Sand Pump Bailers embody this commitment, providing an efficient, safe, and cost-effective solution for wellbore cleanout challenges. With a focus on innovation, quality, and customer service, we ensure that our tools not only meet but exceed the expectations of our clients. Incorporate HOCA's Sand Pump Bailers into your downhole operations and experience a new standard of efficiency and reliability. Choose HOCA Oil Tools for your downhole needs and unlock the full potential of your wellbore operations. Leverage the power of advanced downhole solutions with HOCA Oil Tools. Our Sand Pump Bailers are more than just tools – they are partners in your operational success, ensuring that your wells remain productive, safe, and free from obstructions. View Details

SCSSSV – 2 3/8” Surface-Controlled Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 2 3/8" Surface-Controlled Subsurface Safety Valve (SCSSSV) is designed to shut in a well in the event of uncontrolled flow caused by equipment failure or damage. Installed in the upper wellbore, it provides emergency closure of the producing conduits to isolate the wellbore if there is a failure or damage to surface production control systems.

This valve uses a self-equalizing, surface-controlled, flapper-type mechanism that closes reliably when hydraulic control pressure is lost. The flapper is made from solid bar stock and has sealing surfaces located outside the flow path when open, which helps reduce erosion and extends the valve’s service life. It is rated for working pressures up to 10,000 psi.

The valve fits 2 3/8" (60.33 mm) tubing and is installed in landing nipples with seal bore options of 1.710" or 1.875". Valve internal diameter options are 0.62" or 0.75", allowing selection based on flow requirements. The wireline retrievable design permits servicing or replacement of major valve components without pulling the entire tubing string, reducing intervention time and operational disruption.

This valve is typically used in wells with smaller tubing sizes that require dependable emergency shut-in capability. Its design balances reliability, durability, and ease of maintenance to provide effective well control in a variety of well conditions.

View Details

Telecom Battery

Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles. AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The selfdischarge doubles for every increase in temperature by 10°C. Low internal resistance Accepts very high charge and discharge rates. High cyclic life capability More than 500 cycles at 50% depth of discharge. *data sourced from manufacturer. View Details

2 3/8" L80 Yellowband Tubing Hydril 533"

This connection is fully interchangeable with: Wedge 503® - 2.375 in. - 0.19 (4.70) in. (lb/ft) Wedge 533® - 2.375 in. - 0.218 (5.30) / 0.254 (5.95) / 0.295 (6.60) / 0.336 (7.45) in. (lb/ft) Wedge 563® - 2.375 in. - 0.19 (4.60) / 0.218 (5.10) / 0.254 (5.80) / 0.295 (6.60) / 0.336 (7.35) in. (lb/ft) View Details

Custom ROV Grabber Jaws

Offshore Mini Coil Unit

Navigating Offshore Challenges with InWaTec Combined’s Offshore Mini-Coil Services Offshore oil and gas operations come with a unique set of logistical challenges. In the face of limited deck space and crane capacity, traditional coiled tubing units (CTUs) often fall short in providing the necessary services without compromising operational economics. InWaTec Combined rises to the occasion with our Offshore Mini-Coil Services, designed to deliver efficient, cost-effective well intervention and maintenance solutions in even the most constrained offshore environments. Compact Efficiency: Our capillary/mini-coil CTU is a game-changer for offshore operations. Its compact design minimizes the footprint on the deck, providing a practical alternative to bulkier traditional units. This space-efficient solution is crucial on platforms where every square foot counts. Lift and Load Advantages: The lightweight nature of our Mini-Coil CTU addresses the common challenges of crane limitations. With the reduced load requirements, our Mini-Coil equipment can be easily maneuvered and set up, facilitating a range of well services without the need for heavy lifting equipment. Versatile Applications: Despite its compact size, the Mini-Coil CTU is robust in capabilities. It's adept at a multitude of tasks, from precision interventions like chemical treatments and scale removal to essential maintenance procedures and even wellbore cleanouts. Economic Solution: InWaTec Combined’s Offshore Mini-Coil Services are not just operationally advantageous; they also present significant cost savings. The reduced logistical demands coupled with the efficiency of our Mini-Coil operations translate into a more economical approach to servicing wells offshore. Customized Service Delivery: Understanding that no two wells or offshore platforms are the same, we offer customized Mini-Coil solutions tailored to the specific requirements of each operation. Our team of experts meticulously plans every aspect of the service delivery, ensuring that it aligns perfectly with our clients' operational and economic objectives. At InWaTec Combined, we are committed to innovation and excellence in offshore well services. Our Offshore Mini-Coil Services embody this commitment, providing operators with the assurance that even under the constraints of limited deck space and crane capacity, their wells can be serviced efficiently and effectively. Choose InWaTec Combined for your offshore well interventions, and experience the strategic advantage of our Offshore Mini-Coil Services. We are dedicated to optimizing your operations, ensuring that your offshore wells maintain peak performance with minimal disruption. Let us bring our compact, powerful solutions to your platform, where space is at a premium, but potential is limitless. View Details

Cloud Based Solutions

ELEKS: Transforming Energy Excellence with Cloud-First Strategies In the dynamic realm of the energy sector, innovation isn't a luxury – it's a necessity. ELEKS takes the lead, harnessing our unparalleled energy sector technology expertise to redefine the way you manage energy and utilities. With our cutting-edge cloud-first strategies, we're here to propel your operations to new heights of efficiency, cost-effectiveness, and security. Here's how ELEKS can be your catalyst for an energy future that's smarter, more connected, and infinitely more agile: Tailored Cloud-First Strategies: Your organisation is unique, and so are our strategies. ELEKS expertly tailors cloud-first approaches to fit your specific needs, unlocking unparalleled potential for your energy operations. Performance Optimization: Elevate your performance benchmarks with cloud-first strategies. Our solutions optimize the performance of your software systems, ensuring they operate at their peak efficiency. Cost-Effectiveness Amplified: Say goodbye to bloated budgets. Our cloud-first strategies enhance cost-effectiveness, helping you allocate resources efficiently and maximize the return on your technology investments. Resilience Reinvented: Your operations require robustness. ELEKS' cloud-first strategies bolster the resilience of your systems, ensuring seamless operations even in the face of challenges. Data Security Elevated: Data security is non-negotiable. With our cloud-first strategies, safeguarding your data becomes paramount, protecting your valuable assets from any potential threats. Big Data Unleashed: Embrace the power of Big Data with ELEKS. Our cloud migration services enable you to harness Big Data's potential, enhancing customer satisfaction through real-time analytics on energy consumption. Real-Time Customer Insights: Elevate your customer experience game. Our solutions empower you to provide end-users with real-time insights into their energy consumption, fostering satisfaction and engagement. Advanced Data Analytics: Data is your ally. Our team of custom software development experts implements cloud-based solutions infused with advanced data analytics, turning raw information into actionable insights. ML-Driven Precision: Embrace the future of energy management. Our solutions feature Machine Learning (ML) capabilities, enabling predictive maintenance and driving the precision of your energy systems. ELEKS: For an Agile Energy Future ELEKS isn't just a service provider – we're your innovation partner. Our energy sector technology expertise doesn't just promise solutions; it delivers transformation. With ELEKS, you're not just adopting cloud-first strategies – you're embracing an energy future that's agile, connected, and limitless. Join us in scripting a new energy narrative where innovation meets precision, cost-effectiveness is a norm, and security is paramount. With ELEKS, you're stepping into a realm where technology-driven solutions redefine energy excellence and operational aspirations become reality. Embrace a future where cloud-first strategies power your energy journey, and efficiency is at the heart of every operation. View Details

Compressors Leasing

Elevate Your Operational Efficiency with Compressor Leasing from CWB National Leasing Enhancing Your Business with Flexible and Economical Equipment Solutions In various industries, from construction and manufacturing to automotive repair, compressors play a critical role in powering tools and processes. Leasing compressors through Canadian Western Bank (CWB) National Leasing offers a practical and financially astute solution for businesses seeking to enhance their operational capabilities. Here’s how leasing compressors can benefit your business: 1. Quick Equipment Access CWB National Leasing recognizes the importance of having the right equipment at the right time. They offer a fast and efficient leasing process, with decisions typically made within 48 hours of application submission. This quick turnaround ensures that your compressors can be delivered and operational promptly, minimizing any interruptions to your business operations. 2. Increased Financial Leverage Leasing compressors with CWB National Leasing empowers your business with enhanced buying power. Opting for periodic payments instead of a large initial purchase helps to free up cash for other essential business investments. Moreover, the option to add extra features or accessories to your compressors for a small payment increase allows for customization to meet your specific operational needs. 3. Effective Cash Flow Management With smaller lease payments over the term, your compressors begin to contribute to your business’s revenue while still being paid off. This balanced approach helps in maintaining a healthy expense-to-revenue ratio, which is key for the growth and sustainability of your business. 4. Flexible Payment Structures CWB National Leasing offers a range of payment plans, including seasonal, semi-annual, or annual options, to align with your business’s financial cycle. This flexibility is particularly beneficial for businesses with variable or seasonal revenue patterns, ensuring that payments are manageable and fit your financial situation. 5. Potential Tax Advantages Leasing compressors can offer tax benefits, such as the ability to expense lease payments rather than capitalizing the cost of the equipment. Consulting with a tax advisor is advisable to explore how leasing can enhance your business’s tax position. Conclusion Choosing to lease compressors through CWB National Leasing is a strategic decision that provides your business with essential equipment while maintaining financial flexibility. It ensures access to state-of-the-art compressors, vital for efficient and effective operations, without the financial strain of a large upfront investment. This leasing approach enables enhanced operational capabilities, business expansion, and increased profitability, helping your business to thrive in a competitive marketplace. View Details

R-3 Double Grip Retrievable Packer

The R-3™ packer is a versatile production packer intended for a broad range of production applications. It is a compression-set packer, suitable for stimulation and treating applications in a double-grip configuration. Applications in which excessive bottomhole pressures have been depleted, a single-grip version can be used as an economical production packer. The R-3 single-grip retrievable-casing packer is set with one-fourth-turn right-hand rotation and can be released with straight pickup. We can source from current stock or direct from the manufacturer. View Details

Wisdom Lamp 4A

Illuminate Your Adventures with the Wisdom Lamp 4A: The Ultimate Multi-Purpose Headlamp from Provix Provix is thrilled to introduce the Wisdom Lamp 4A, a versatile and powerful multi-purpose headlamp designed to meet a variety of lighting needs. Whether you're a professional in the mining industry or an outdoor enthusiast, the Lamp 4A is engineered to provide exceptional illumination and functionality. Powerful and Versatile Lighting Options The Lamp 4A features three brightness modes: High (HI), Medium (ME), and Low (LO), catering to different lighting requirements. With an impressive light luminous flux of 533 lm (HI), 265 lm (ME), and 50 lm (LO), and an initial lighting degree of 25,000 lx (HI), 12,000 lx (ME), and 1,800 lx (LO), this headlamp ensures clear visibility in various environments. Long-Lasting and Rechargeable Battery Equipped with a robust 7,000mAh battery and a rated voltage of 3.7V, the Lamp 4A provides continuous discharging times of 5 hours (HI), 13 hours (ME), and 60 hours (LO). The battery is rechargeable, offering up to 1,200 cycles in reasonable working conditions, making it both sustainable and reliable. Unique Feature: Charge Your Cellphone In addition to its lighting capabilities, the Lamp 4A can charge your cellphone, making it a handy tool for emergencies or outdoor activities. This unique feature, coupled with its USB charging ability and a quick 5-hour charging time, adds to its versatility and appeal. Built for Durability and Safety The Lamp 4A is designed with safety in mind. It is water-proof with an IP68 rating and includes a short circuit protection time of less than 320μs. Its durable design ensures it withstands harsh conditions, suitable for both professional and recreational use. Lightweight and Compact Design Weighing just 169g (5.96 oz) and with dimensions of 84x69x50mm (3.3x2.7x2.0in), the Lamp 4A is compact and comfortable to wear, making it ideal for extended use without causing fatigue. SOS Function for Emergency Situations An added SOS function makes the Lamp 4A a vital tool for emergency situations, providing an extra layer of safety during outdoor adventures or in hazardous work environments. Get Your Wisdom Lamp 4A Today The Wisdom Lamp 4A is available now at Provix, ready to light up your work and adventures with its exceptional features. . Experience the difference with the Lamp 4A – your reliable companion in lighting. View Details

9 5/8" Feed Through Packer

The Ballycatter 9 5/8” Feedthrough Packer is a robust hydraulic-set packer built for large-bore completions in 9 5/8” casing. Designed for high-volume production and injection applications, this packer features bi-directional barrel slips that anchor it against pressure fluctuations and tubing movement, ensuring stability and well integrity.

The pass-through cable section enables a secure electrical connection to below, maintaining operational efficiency in high-flow rate wellbores. Its durable single-mandrel construction and Acner Array Packing Element provide exceptional resistance to high temperatures and corrosive environments, making it an ideal choice for challenging downhole conditions.

The 9 5/8” Feed-Thru Packer is set hydraulically by applying tubing pressure against a plugging device, mechanically locking the slips and sealing elements in place. Its dual-grip anchoring system enhances stability, making it particularly suited for large-bore completions with significant tubing expansion and contraction forces.

The straight pull retrieval mechanism allows for efficient removal and reduced intervention costs, ensuring minimal downtime and operational efficiency. Compatible with all major cable pack-off systems, this packer provides high-performance isolation and superior sealing integrity in large-diameter wells.

View Details

Nearshore Development

ELEKS: Your Ultimate Nearshore Software Development Partner Unlock the potential of nearshore software development with ELEKS – your gateway to building top-tier technology solutions across borders. With 11 delivery centers spanning 8 countries, we offer you a seamless collaboration experience that transcends geographical barriers and propels your projects to new heights. ELEKS Nearshore Software Development: The Future of Collaboration Time Zone and Geographical Alignment: Experience a level of synchronicity that offshore development can't provide. ELEKS nearshore software development ensures smooth communication, collaboration, and project delivery. Our nearshore advantage means regular onsite visits and a working partnership that's as cohesive as it is efficient. Unified Cultural Approach: Integration goes beyond technology – it's about embracing culture. Our experts seamlessly blend with your in-house team, adopting your unique ethos. Beyond that, we transfer vital process and behavior-change knowledge, ensuring a truly unified and synergistic approach. Faster Product Launch: Elevate your go-to-market strategy with ELEKS as your nearshore development partner. Our streamlined processes and collaborative approach mean you can launch your product twice as fast. Time is of the essence in today's dynamic market – we help you seize it. Superior Quality of Work: Satisfaction is not a target; it's a standard. At ELEKS, we never rest until you're completely satisfied. Our unmatched client satisfaction rating of 97% speaks volumes about our commitment to excellence. Trust us to deliver top-notch results. Access to Top Talent: ELEKS' talent pool boasts 2000+ multi-skilled specialists rooted in math and physics. This means you can assemble the perfect team to bring your vision to life. The right talent is the foundation of success – with us, it's a given. Dedicated Team: Complexity meets capability with our dedicated teams. We handpick specialists with tailored skills to flawlessly execute your software vision. No matter how intricate your project, our experts are up to the task. ELEKS Global Presence: Spanning 18 locations across three continents, ELEKS ensures swift and streamlined communication. With us, you'll experience the efficiency and cost-saving benefits of offshore development coupled with accessible, onsite collaboration. ELEKS Nearshore Software Development: Where Innovation Meets Excellence Our Nearshore Software Development Services: Our portfolio is a testament to three decades of innovation and expertise. With a wide range of market-leading software and consultancy services, we cater to global clients with diverse needs. What Sets ELEKS Apart? • Nearly three decades of custom software development excellence • Extensive technology consulting prowess • Deep strategic product design proficiency with a UX-certified team • One of Ukraine's largest data science teams • Mitigate investment risk with MVP development • Trailblazing technological innovation through our in-house R&D lab Nearshore vs. Offshore vs. Onshore: A Winning Formula with ELEKS When scaling or upskilling is the name of the game, onshore development can be effective but pricey. Offshore options save you time and money, but often come with control trade-offs. ELEKS introduces the winning formula: nearshore development. It blends cost efficiency with quality, offering streamlined communication and onsite visits without compromising savings. ELEKS Nearshore Software Development: Your Bridge to Innovation Experience the best of both worlds – a nearshore team that combines accessibility with efficiency. ELEKS empowers you to transcend borders, embrace innovation, and redefine success. With us, your nearshore journey is a step towards a more collaborative and prosperous future. View Details

Downhole Magnet - Flat Bottom

Wisdom Cap Lamp KL12MS

Discover Unmatched Illumination with Wisdom's KL12MS Corded Miner's Cap Lamp from Provix Introducing the Wisdom KL12MS Corded Miner's Cap Lamp, a cutting-edge lighting solution for the mining industry, proudly offered by Provix. This lamp is specifically designed to meet the challenging demands of underground mining, providing exceptional illumination, safety, and durability. Exceptional Lighting Performance The KL12MS is equipped with a robust 14,000mAh battery, guaranteeing up to 13 hours of continuous operation. It features a high-powered main light LED with a working voltage of 3.0V, current of 1080mA, and power of 3.24W. This results in a remarkable luminous flux of 512 lm and an extraordinary lighting degree of 28,000 lx, ensuring unparalleled visibility in the darkest environments. Durability and Longevity Built to last, the KL12MS boasts a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery life extends up to 1,200 cycles under typical working conditions, emphasizing reliability and longevity. Prioritizing Safety Your safety is our priority. The KL12MS is designed with explosion-proof features, conforming to ATEX GROUP II standards, and an IP68 waterproof rating. Its short circuit protection time of less than 320 μs further enhances its safety credentials, making it a trustworthy companion in any mining operation. Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz), the KL12MS is comfortable for extended use. Its main cable length ranges from 1.4 to 1.65 meters (4.59 to 5.41 feet), offering flexibility and freedom of movement. The compact battery box, measuring 94 x 36 x 90 mm (3.7 x 1.4 x 3.5 in), ensures the lamp is not cumbersome during long shifts. Efficient Charging Capabilities The lamp's rechargeable via USB feature provides convenient and efficient charging. It takes only 5.5 to 10 hours to charge, minimizing downtime and maximizing productivity. Get in Touch for More Information Upgrade to the Wisdom KL12MS Corded Miner's Cap Lamp for enhanced visibility, safety, and efficiency in your mining operations. Visit Provix at our location, call us, or email sales@provix.net for more details. Explore our range of products at www.provix.net and experience the future of mining illumination with the Wisdom KL12MS. View Details

BMS Versol B

Introducing BMS VerSol B: The Perfect Replacement for Harmful Chemicals Cleanstream is proud to present BMS VerSol B, an environmentally friendly alternative to standard solvents like D-Limonene, Dearomatized hydrocarbons, and Perchloroethylene. We understand the negative impact that harmful chemicals have on our planet and that's why we have developed a product that is not only effective but also safer for the environment. With BMS VerSol B, you can say goodbye to traditional solvents and hello to a more sustainable future. BMS VerSol B is a chemical product that provides a more environmentally conscious alternative to D-Limonene. It's a perfect replacement for all your solvent needs, providing exceptional cleaning performance without the environmental hazards of traditional solvents. Whether you're a small business owner or a large industrial company, BMS VerSol B is the right choice for you. By choosing our product, you're taking a step towards reducing your costs and making a positive impact on the environment. At Cleanstream, we are committed to creating a sustainable future, and we believe that BMS VerSol B is just one of the many ways we can contribute to a cleaner, greener planet. So what are you waiting for? Make the switch to BMS VerSol B today and experience the benefits of a safer, more eco-friendly solvent. Contact us to learn more about how you can get started with BMS VerSol B. View Details

Custom Application Development Services

BMS Versol D

Introducing BMS VerSol D: The Safer and More Environmentally Conscious Solvent Cleanstream is excited to introduce BMS VerSol D, the perfect replacement for harmful solvents such as THF, NMP/NEP, and chlorinated solvents. Our product is designed to provide a more sustainable and safer alternative for your cleaning needs. BMS VerSol D is a chemical product that is perfect for those looking for a more environmentally conscious solution to their cleaning needs. Our solvent is a green Xylene replacement that is much safer to use than traditional solvents that contain BTEX. In addition to being safer for the environment, BMS VerSol D is also highly effective in cleaning corrosion, inhibition, and organic deposits from hoses, pumps, tubulars, heat-exchangers, and pumping equipment. Our product is also a great replacement for BTEX solvents in well cleanup operations. With BMS VerSol D, you can achieve the same cleaning performance without any of the harmful effects of traditional solvents. By choosing BMS VerSol D, you are taking a significant step towards reducing your carbon footprint and contributing to a cleaner and greener planet. Our solvent is specially formulated to meet the highest environmental standards while providing exceptional cleaning performance. At Cleanstream, we are committed to creating a sustainable future, and BMS VerSol D is just one of the many ways we are working towards that goal. So why wait? Make the switch to BMS VerSol D today and experience the benefits of a safer and more environmentally conscious solvent. Contact us to learn more about how you can get started with BMS VerSol D. View Details

5 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Coiled Tubing Surface Filter

Partnered with Microsoft

Empower Your Business with ALCiT's Microsoft Partnership In the realm of technology, partnerships are the catalysts for transformation. ALCiT proudly collaborates with Microsoft, the epitome of innovation, to bring you a future where Windows and Office 365 redefine how your people work, collaborate, and excel. Welcome to a world of limitless possibilities, where over 1.5 billion Windows users stand united in productivity. Microsoft: The Pillar of Empowerment Microsoft isn't just a name; it's a symbol of empowerment. With Windows and Office 365, Microsoft provides the canvas for your people to unleash their potential and achieve greatness. ALCiT joins this journey, enriching your Microsoft experience to drive unprecedented success. Two Pillars of Success: Secure and Efficient Success isn't just about using the tools; it's about optimizing them. ALCiT recognizes the importance of two pivotal actions: Security and Efficiency Configuration: We empower your products to be not just tools, but shields and catalysts for growth. Our expertise ensures your solutions are configured for optimal security and efficiency. Patch Power for Functionality and Security: Regular patches are your key to continuous growth. ALCiT ensures that your products evolve, enhancing their functionality and fortifying their security to meet the demands of tomorrow. ALCiT: Your Partner in Microsoft Mastery At ALCiT, we're more than just service providers – we're partners in your success. We understand that technology is the heartbeat of your operations, and with Microsoft, it's your anthem of progress. Our collaboration with Microsoft transforms your tools into enablers of excellence. Your Success: Our Commitment Empowerment Redefined: Unleash the potential of Windows and Office 365, elevating your people's capabilities and driving results like never before. Security and Efficiency Perfected: With ALCiT's touch, your products become more than tools – they become instruments of success, fortified against challenges. Patch into Excellence: Experience a world where functionality and security evolve together, ensuring your products align with your growth journey. Unleash the Microsoft Advantage Today ALCiT's partnership with Microsoft isn't just a collaboration; it's a commitment to your success. View Details

Mobile Gas Troubleshooting

Responsive Mobile Gas Troubleshooting: We're Here to Be Part of the Solution Have you ever experienced the frustration of needing help but struggling to get through to anyone? Or perhaps you've encountered resistance when requesting changes to your work plan due to unexpected circumstances. At Lovat Gas Solutions, we understand that as a service-oriented company, our role is to respond to your evolving needs and be an integral part of the solution, rather than a source of more problems. We are committed to providing responsive mobile gas troubleshooting services that address your challenges and keep your operations running smoothly. When you choose Lovat Gas Solutions, you can expect: 1. Responsiveness: We recognize the importance of timely support. Our team is dedicated to being available and responsive when you need us the most. Whether it's troubleshooting a gas-related issue or making adjustments to your work plan, we are committed to addressing your concerns promptly and efficiently. 2. Collaboration: We believe in working closely with our clients to understand their unique needs and challenges. Our collaborative approach allows us to identify the most effective solutions and provide the support you require. We are here to listen, adapt, and work together to overcome any obstacles that may arise. 3. Problem Solvers: Our team of experts is well-equipped to tackle a wide range of gas-related issues. With our extensive knowledge and experience, we can troubleshoot problems and offer practical solutions that align with your goals. Count on us to be proactive problem solvers who are dedicated to finding the best outcome for your business. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We strive to exceed your expectations by delivering exceptional service and ensuring that we not only meet your immediate needs but also contribute to your long-term success. Your trust and satisfaction are the driving forces behind everything we do. Choose Lovat Gas Solutions as your partner for responsive mobile gas troubleshooting. Experience the difference of working with a company that is committed to being there for you, supporting your needs, and providing effective solutions. Contact us today, and let us be part of the solution to your gas-related challenges. Together, we will overcome obstacles and ensure the smooth operation of your business with Lovat Gas Solutions. View Details

Lock Mandrel Running Tool

Maximize Your Downhole Success with HOCA Oil Tools' Running Tools for Lock Mandrels In the complex world of downhole operations, the necessity for precision, safety, and efficiency cannot be overstated. HOCA Oil Tools, a leader in providing advanced downhole slick line tools, introduces a range of Running Tools specifically designed for Lock Mandrels, ensuring seamless integration and operation in your wellbore activities. HOCA’s Running Tools for Lock Mandrels: Precision, Versatility, and Reliability Our Running Tools for Lock Mandrels are engineered with precision, crafted to deliver unmatched performance in downhole settings. These tools are essential for setting or positioning downhole flow controls and devices at predetermined depths efficiently and accurately. Designed for versatility, they accommodate various sizes and types of Lock Mandrels, ensuring compatibility and flexibility for different downhole requirements. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to providing the oil and gas industry with downhole solutions that set new standards in quality, efficiency, and reliability. Our Running Tools for Lock Mandrels are a testament to this commitment, designed to enhance your downhole operations and drive success. Incorporating our Running Tools into your downhole toolkit not only ensures optimal performance but also aligns your operations with the highest standards of precision and safety. With HOCA Oil Tools, you gain a partner dedicated to supporting your downhole success with innovative solutions and exceptional service. Choose HOCA Oil Tools’ Running Tools for your Lock Mandrels and elevate your downhole operations to new heights. Partner with us and experience the difference that precision engineering, reliability, and dedicated support can make in your wellbore activities. Embrace the future of downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency. View Details

Partnered with Microsoft Business Voice

Multiprocess 231 SLM Welding Machine

5" HP-6 Hydraulic Set High Angle Production Packer for 11.5-15 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Storm Choke WI Valve 3.97 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

HDI 2200 Choke Position Indicator System

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

View Details

Remote Operated Vehicle (ROV) Training Courses

Dive into the Depths: Poseidon Robotics Introduces Subsea ROV Training Courses At Poseidon Robotics, we believe that the true potential of subsea exploration lies in the hands of skilled professionals. That's why we are excited to announce our comprehensive Subsea ROV Training Courses, designed to equip aspiring ROV operators and seasoned professionals alike with the knowledge and expertise needed to master the art of underwater robotics. Unleash Your Subsea Potential Subsea robotics and Remote Operated Vehicles (ROVs) are revolutionizing the way we explore and interact with the underwater world. Our ROV training courses are crafted to empower individuals with the skills required to navigate ROVs with precision and confidence, ensuring safe and efficient operations beneath the waves. Experience and Expertise At Poseidon Robotics, we take pride in our team of experienced instructors who bring a wealth of knowledge from years of practical ROV operation and subsea exploration. Our instructors have worked on diverse projects worldwide, ranging from offshore oil and gas installations to scientific research and environmental surveys. Comprehensive Curriculum Our Subsea ROV Training Courses cover a wide range of topics, catering to both beginners and advanced learners. From the fundamentals of ROV piloting and navigation to advanced techniques, troubleshooting, and maintenance, our courses leave no stone unturned in providing a well-rounded education in subsea robotics. Hands-On Learning We understand that practical experience is the key to mastering ROV operations. That's why our training courses feature hands-on learning opportunities with our cutting-edge ROV systems. Participants get to operate ROVs in simulated real-world scenarios, honing their skills under the guidance of our seasoned instructors. Tailored to Your Needs Whether you are an individual looking to kickstart your career in subsea robotics or a company seeking to train your ROV operators, our courses can be tailored to meet your specific needs. We offer both individual and group training options, ensuring that you get the most out of your learning experience. A Gateway to New Opportunities Completing our Subsea ROV Training Courses opens the door to exciting career opportunities in the subsea industry. As the demand for skilled ROV operators continues to grow, our certified graduates are well-prepared to embark on rewarding careers in offshore exploration, marine research, salvage operations, and more. Join the Poseidon Robotics Academy Are you ready to dive into the depths of subsea robotics and ROV operations? Join the Poseidon Robotics Academy and unlock the potential of underwater exploration. Our Subsea ROV Training Courses provide the knowledge, skills, and confidence you need to excel in the world of subsea robotics. Invest in Your Future Invest in your future and become a part of the cutting-edge subsea robotics industry. Contact Poseidon Robotics today to learn more about our Subsea ROV Training Courses and take the first step toward a fulfilling and adventurous career beneath the waves. The subsea world awaits your exploration! View Details

H Storm Choke 2 inch

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Downhole Magnet - Radial

Rod Pump of various diameters and stroke lengths to optimize oil production

Sucker rod pumping systems are the oldest and most widely used type of artificial lifting system for oil wells. Sucker-rod pumping is the most widely used artificial lift method for onshore oil wells. Sucker-rod strings transfer the motion from the driving machine on the wellhead to the downhole oil pump. Pump diagnoses are generally conducted through an interpretation of the pump dynamometer graph (pump card). View Details

HDI 2021 Pressure Transmitter System

When it comes to precise and reliable pressure measurement, the HDI 2021 Pressure Transmitter System sets the standard for excellence. Built with the high-quality components that HDI is renowned for, this intrinsically safe, certified, solid-state 4-20mA transmitter ensures exceptional performance in even the most demanding applications. Tailored to Your Needs: The HDI 2021 is available in a variety of configurations, allowing customers to specify the housing that best suits their unique application requirements. With customisation options at your disposal, you can trust that the transmitter will seamlessly integrate into your operational setup. Complete Assembly for Easy Installation: Delivered as a complete assembly, the HDI 2021 Pressure Transmitter System is ready for quick and hassle-free installation. We understand the value of your time, which is why we provide a comprehensive solution that saves you effort and resources. Unparalleled Safety and Reliability: All HDI Transmitters are designed to provide unmatched safety, accuracy, reliability, and low maintenance for our users. With the 2021 Pressure Transmitter System, you can have peace of mind knowing that it meets the highest industry standards and is built to last. Versatility for Various Applications: The HDI 2021 can be customized not only for pressure measurement but also for load, force, and torque applications across different industries. Whether you are in oil and gas, manufacturing, or any other field, our team can work with you to tailor the system to your specific needs. Certifications You Can Trust: The HDI 2021 Pressure Transmitter System boasts certifications that ensure compliance and performance. It is CSA certified as Intrinsically Safe Class 1, Division 1, Groups A, B, C, and D. Additionally, an optional ATEX certification (II 1 G, Ex ia IIC T4) is available for enhanced safety in hazardous environments. Key Features: • Field repairable system, minimizing downtime and reducing maintenance costs • Wide pressure range options, including 5,000 psi, 6,000 psi, 10,000 psi, 16,000 psi, and 20,000 psi • Multiple connection types, such as 2" 1502, 2" 2002, 2" 2202, or flanged connections, providing flexibility for installation • 4-20mA output available, ensuring compatibility with your existing systems • Solid-state platform with no fluids or moving parts, guaranteeing long-term reliability and accuracy Trust HDI for Unmatched Performance: When it comes to pressure measurement, the HDI 2021 Pressure Transmitter System stands out as the pinnacle of quality and precision. Contact our experienced team today to discuss your specific application requirements and experience the HDI advantage. With our unwavering commitment to excellence, we deliver solutions that meet your needs and exceed your expectations. Houston Digital Instruments - Your Partner in Precision Measurement. View Details

Lock Mandrels for Landing Nipples

Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry. View Details

GPS Leasing

Lease GPS Systems with CWB National Leasing: The Road to Business Success In today's fast-paced business landscape, staying ahead of the competition requires efficiency, flexibility, and smart financial decisions. One way savvy business owners are achieving this is by leasing GPS systems through CWB National Leasing. If you're ready to supercharge your business and increase your profits, you've come to the right place. Here's why you should consider leasing GPS systems with us: Get Your Equipment Fast Time is of the essence in business, and we understand that. When you choose to lease GPS systems with CWB National Leasing, you can expect a lightning-fast process. We'll review your application promptly and provide a decision on your lease within 48 hours of your approval. That's right; in just two days, you'll have the green light to acquire the GPS equipment you need. Once approved, we'll notify your chosen equipment dealer, and you can sit back and wait for the delivery of your equipment. Our commitment to swift service ensures that you can start using your GPS systems without unnecessary delays. Increase Buying Power Leveraging your buying power is a key advantage of leasing GPS systems. Rather than making a substantial upfront purchase, you can free up cash by opting for periodic lease payments. This approach allows you to allocate your capital to other critical areas of your business. What's more, with CWB National Leasing, you have the option to add extra features or accessories to your GPS equipment for a small payment increase. It's a strategic way to customize your equipment to meet your specific needs without breaking the bank. With our leasing solutions, you'll truly put the "POW" in buying power! Control Your Cash Flow Effective cash flow management is essential for any business. When you choose to lease GPS systems, you'll benefit from small, manageable payments spread over the lease term. This means your equipment will begin earning you money while you pay it off. The ability to align your expenses with revenue generation makes it easy to maintain a healthy expense-to-revenue ratio. It's a smart financial strategy that allows you to stay in control of your cash flow while reaping the benefits of GPS technology. Seasonal Payment Options At CWB National Leasing, we understand that every business has unique financial cycles. That's why we're all about flexibility. Our leasing solutions are designed to match your revenue patterns. Whether you prefer seasonal, semi-annual, or annual payments, we can structure your lease to align with your business's cash flow. This tailored approach ensures that your GPS system lease remains convenient and sustainable throughout the year. Potential Tax Savings Leasing GPS systems can offer your business potential tax benefits. In many instances, leasing allows you to expense lease payments, providing income tax benefits rather than depreciating the capital cost of equipment. To fully understand how leasing can benefit the tax position of your business, we recommend consulting your tax advisor. They can provide insights into the specific advantages that leasing GPS systems can offer your unique financial situation. In conclusion, leasing GPS systems with CWB National Leasing is a strategic decision that can help your business thrive. From fast equipment acquisition to increased buying power, controlled cash flow, flexible payment options, and potential tax savings, our leasing solutions are designed to empower your business for success. Take the road to business success with CWB National Leasing today! View Details

BlueROV2 by Blue Robotics

Unleash the Depths with Blue Robotics' BlueROV2 Poseidon Robotics is thrilled to introduce the BlueROV2, a versatile and high-performance Remotely Operated Vehicle (ROV) designed and built by the renowned experts at Blue Robotics Inc. Engineered to deliver exceptional value, the BlueROV2 is a testament to innovation, reliability, and affordability in the world of subsea exploration. Excellence in Stock and Ready to Ship! While we didn't design this exceptional ROV, our team at Poseidon Robotics is proud to assemble and stock the BlueROV2 for customers like you. We understand that time is of the essence in subsea operations, which is why we have BlueROV2 units ready to ship immediately. Need an ROV tomorrow? Count on Poseidon Robotics to have one dispatched today. Meticulous Assembly and Testing The BlueROV2 is more than just a remarkable product; it represents the culmination of expertise and craftsmanship. Each unit is carefully assembled by our skilled technicians, who take pride in their work to ensure every detail is perfect. Before shipping, each BlueROV2 undergoes rigorous testing, calibration, and a comprehensive factory acceptance test to meet the highest standards of quality and performance. Explore the Configuration The BlueROV2 comes with a powerful and agile 6 thruster frame, offering you unparalleled maneuverability in the water. Crafted from robust aluminum tubes, the frame is built to endure the demanding conditions of underwater environments. The Newton Gripper enhances your ROV's capabilities, allowing you to interact with the underwater world effortlessly. Illuminate your subsea adventures with 4 Lumen lights, providing excellent visibility even in the darkest waters. To ensure seamless operation, we've equipped the BlueROV2 with a specially modified tether quick disconnect for hassle-free connections. With 150m of tether on a reliable reel, you have the freedom to explore vast distances below the surface. Your Complete ROV Package Poseidon Robotics believes in providing you with everything you need to embark on your underwater missions immediately. When you choose the BlueROV2, you get more than just the ROV; you receive a comprehensive package to enhance your subsea experience: 1. BlueROV2 as Configured: Ready to dive and explore right out of the box. 2. Fathom Spool with 150m Tether: Experience the freedom to roam with a generous length of tether. 3. 1 Battery + Charger: Stay powered up and keep your ROV running smoothly. 4. Upgraded Tools and Spares Kit: We've included essential tools and spares to keep your ROV at peak performance. 5. Seahorse Wheeled Transport Cases: Secure and transport your BlueROV2 effortlessly with foam-padded cases. Specifications • Shipping Dimensions: o Case 1 (ROV): 29”x 23”x 16”, 55lbs o Case 2 (Reel/Tether): 29”x 23”x 16”, 53lbs o Case 3 (Batt/Spares/Tools): 24”x 16”x 10”, 25lbs Assurance of Quality At Poseidon Robotics, we stand behind our products. The BlueROV2 comes with a 90-day limited warranty, ensuring your peace of mind as you embark on your underwater adventures. Embrace Exploration with the BlueROV2 Are you ready to dive into the wonders of the deep? The BlueROV2 is your gateway to an awe-inspiring subsea world. With Poseidon Robotics' fast shipping, assembling and testing expertise, you can begin your underwater exploration journey without delay. Let the BlueROV2 be your trusted companion for your most ambitious subsea projects. Contact us today to dive deeper and discover the BlueROV2 difference! View Details

IT Technical Support and Maintenance Services

ELEKS IT Technical Support and Maintenance Services: Your Steady IT Compass In today's dynamic business landscape, flawless IT operations are imperative. The ever-evolving tech ecosystem requires impeccable management of technical challenges and periods of transformation. Enter ELEKS' advanced IT support and maintenance services – your guiding light in the realm of IT stability. ELEKS IT Technical Support and Maintenance Services: Guiding Your Path Protect Your IT Solution: Identifying issues and potential risks with your IT solution is the first step towards ensuring uninterrupted operations. Our swift resolutions minimize revenue loss and enable you to adapt seamlessly to environmental, IT infrastructure, and integration changes. No matter the landscape shift, your systems remain operational. Reinforce Your Skills: Equipped with expertise across multiple technological domains, we stand ready to help you overcome technical challenges and navigate digital transformations. Our knowledge base sets the stage for faster incident resolution and empowers your end-users with self-service capabilities, ensuring readiness for future changes. Overcome Complex Issues: Our IT technical support and maintenance services offer two tiers – L2 and L3. L2 swiftly gets you back on track post-failure, while L3 dives deep into complex issues, improving software by altering program code for enhanced performance. Reduce TCO of IT Systems: Years of experience pave the way for a seamless setup and robust support framework. This not only slashes your Total Cost of Ownership (TCO) but also facilitates faster issue resolution, garners superior customer feedback, and curtails systems maintenance expenditure. Transfer and Manage Duties and Risks: Our services enable your in-house team to focus on your core business, while we manage your IT infrastructure. Moreover, we're poised to provide after-hours support, ensuring you're covered for unforeseen circumstances. ELEKS IT Technical Support and Maintenance Services: Navigating Reliability Problem Resolution: Once an issue is reported, our team swiftly isolates the root cause and resolves it. Our proactive approach involves setting up monitoring tools to preempt incidents and potential problems, ensuring seamless operations for your users. L2 Technical Support: Quick recovery following a systems failure is guaranteed with our L2 support, all without making any alterations to your software code. This comprehensive service covers applications, databases, integration points, related environment components, and virtual cloud infrastructure. L3 Technical Support: For advanced software issues and improvements, our L3 support is your go-to solution. Our team of experts adeptly modifies your program code, covering everything from bug fixes and security/performance issues to system compliance checks and updates to integration interfaces. ELEKS IT Technical Support and Maintenance Services: Your IT Rock In a world where IT stability is paramount, ELEKS emerges as your steadfast partner. With our advanced support and maintenance services, your IT ecosystem gains the strength to navigate challenges and seize opportunities. Trust ELEKS to be your IT compass, guiding you towards unwavering operations and unwrapping the full potential of your digital endeavors. View Details

Planers Leasing

Elevate Your Business with Planer Equipment Leasing from CWB National Leasing Transforming Your Operations Through Flexible Equipment Solutions For businesses in construction, woodworking, or manufacturing, having the right planer equipment is essential for precision and efficiency. Leasing your planers through Canadian Western Bank (CWB) National Leasing offers an innovative and financially prudent way to enhance your operations. Here's how leasing planers can significantly benefit your business: 1. Speedy Equipment Procurement CWB National Leasing values the importance of time in your business. They ensure a quick leasing process, with a decision typically made within 48 hours of application submission. This rapid turnaround means your planer equipment can be delivered and operational soon after approval, minimizing any disruption to your projects. 2. Boosted Purchasing Power Leasing planers with CWB National Leasing increases your financial leverage. Instead of a large initial investment, you can make periodic payments, thereby freeing up capital for other business investments. Furthermore, you have the option to add extra features or accessories to your equipment with a minor increase in payments, enhancing its capabilities. 3. Optimized Cash Flow Management With smaller, spread-out lease payments, your planer equipment starts contributing to your revenue even as it's being paid off. This approach helps maintain a balanced expense-to-revenue ratio, which is crucial for business stability and growth. 4. Customized Payment Structures Recognizing that every business has unique financial needs, CWB National Leasing offers flexible payment options, including seasonal, semi-annual, or annual plans. This adaptability is particularly beneficial for businesses with fluctuating income patterns, ensuring that payments align with your financial flow. 5. Potential Tax Advantages Leasing can offer tax benefits, such as allowing you to expense lease payments instead of capitalizing the cost of the planer equipment. Consulting with a tax advisor is advisable to understand how leasing can favorably impact your business’s tax position. Conclusion Opting to lease planer equipment through CWB National Leasing is a strategic decision that provides your business with necessary tools while maintaining financial agility. It ensures access to advanced equipment, essential for precise and efficient operations, without the financial burden of a large upfront purchase. This approach paves the way for enhanced operational capabilities, growth, and profitability in your business. View Details

Welders Leasing

Accelerate Your Fabrication Success with Welder Leasing from CWB National Leasing Empowering Your Business with State-of-the-Art Welding Solutions In industries such as manufacturing, construction, automotive repair, and metalworking, high-quality welders are essential for efficient, precise, and reliable fabrication work. Leasing welders through Canadian Western Bank (CWB) National Leasing presents a flexible, cost-effective, and intelligent solution for businesses seeking to enhance their welding capabilities. Here’s how leasing welders can boost your business operations: 1. Fast Access to Advanced Welding Equipment CWB National Leasing understands the critical role of welding equipment in your operations. They offer a swift leasing process, typically notifying your equipment dealer about payment within 48 hours of approval. This rapid service means your welders can be delivered and operational quickly, enhancing your fabrication efficiency and reducing project turnaround times. 2. Enhanced Financial Flexibility Leasing welders with CWB National Leasing enhances your buying power. It allows you to allocate resources efficiently by opting for periodic payments over a significant upfront purchase. The flexibility to add extra features or accessories to your welders for a small payment increase enables customization to meet specific operational needs. 3. Effective Cash Flow Management Manageable lease payments over the term mean your welders start contributing to your business’s revenue while they're still being paid off. This strategy helps maintain a healthy balance between expenses and income, crucial for long-term business stability and growth. 4. Customizable Payment Plans CWB National Leasing offers a range of payment options, including seasonal, semi-annual, or annual plans, tailored to your business’s financial cycle. This flexibility is particularly beneficial for businesses with seasonal fluctuations in income, ensuring that payments are practical and aligned with your financial situation. 5. Potential Tax Benefits Leasing welders can offer tax advantages, such as the ability to expense lease payments instead of capitalizing the cost of the equipment. Consulting with a tax advisor is recommended to understand how leasing can positively impact your business’s tax position. Conclusion Opting to lease welders through CWB National Leasing is a strategic decision that equips your business with essential welding tools while maintaining financial agility. It ensures access to the latest welding technology, vital for high-quality fabrication, without the financial burden of a large upfront investment. This leasing approach enables enhanced operational efficiency, improved production quality, and increased profitability, helping your business excel in the competitive fabrication and manufacturing industries. View Details

HDI 2250 Valve Position Indicator System

The HDI 2250 Valve Position Indicator System provides a reliable method to monitor the open or closed status of manual and hydraulically operated gate valves on choke manifolds. It offers two modes of position verification: a clear visual indicator mounted directly on the valve, and an electronic signal transmitted remotely to control rooms or monitoring systems. This dual feedback delivers real-time valve position information both locally and from a distance, enhancing operational control and safety.

The system is compatible with a wide range of rising and non-rising stem gate valves from various manufacturers, adding position monitoring without compromising valve integrity or certification. An adapter enables installation on valves that lack built-in position feedback. The sensor is an inductive Namur type housed within a rugged 316 stainless steel case, engineered for hazardous oilfield environments. It operates on a 5 to 25 volts DC power supply, making it suitable for integration with most industrial control systems.

Weighing 15.3 pounds with the junction box mounted, the 2250 is built for durability and long-term performance in demanding onshore and offshore conditions. Once installed, it requires minimal maintenance, reducing operational downtime.

The system connects easily to local displays and remote monitoring platforms, offering a comprehensive view of valve positions across the manifold. It supports both Namur and proximity sensors, providing flexibility to meet different installation requirements.

The 2250 stands out for its ability to retrofit manual valves without modification, its robust construction for harsh environments, and dual visual and electronic position reporting. These features make it a practical, dependable choice for improving safety and operational awareness in oil and gas valve management.

View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type