Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 2 3/8" Surface-Controlled Subsurface Safety Valve (SCSSSV) is designed to shut in a well in the event of uncontrolled flow caused by equipment failure or damage. Installed in the upper wellbore, it provides emergency closure of the producing conduits to isolate the wellbore if there is a failure or damage to surface production control systems.

This valve uses a self-equalizing, surface-controlled, flapper-type mechanism that closes reliably when hydraulic control pressure is lost. The flapper is made from solid bar stock and has sealing surfaces located outside the flow path when open, which helps reduce erosion and extends the valve’s service life. It is rated for working pressures up to 10,000 psi.

The valve fits 2 3/8" (60.33 mm) tubing and is installed in landing nipples with seal bore options of 1.710" or 1.875". Valve internal diameter options are 0.62" or 0.75", allowing selection based on flow requirements. The wireline retrievable design permits servicing or replacement of major valve components without pulling the entire tubing string, reducing intervention time and operational disruption.

This valve is typically used in wells with smaller tubing sizes that require dependable emergency shut-in capability. Its design balances reliability, durability, and ease of maintenance to provide effective well control in a variety of well conditions.

The 6 7/8” to 4 1/2” Tubing Hanger Coupling is a specialized connection used in oil and gas wellhead systems to join a large-diameter casing outlet—6 7/8 inches—with 4 1/2-inch upset production tubing. This configuration is typically applied in high-flow and high-pressure wells where maintaining structural integrity and maximizing production efficiency are critical.

The coupling serves as a transition component within a tubing hanger assembly, allowing the tubing to be securely suspended in the wellhead without the need to rotate the Christmas tree during installation. This is made possible by its union nut design, which permits tightening from the side, simplifying assembly in tight or restricted spaces.

The 4 1/2” end is designed for upset tubing, which features thickened ends to provide stronger threaded connections capable of withstanding axial loads and internal pressure. This enhances the mechanical performance of the joint, reduces the risk of fatigue failure, and helps maintain seal integrity over long service periods. The coupling is also threaded to accept a back pressure valve, an essential feature that provides well control during servicing, installation, or emergency conditions.

To meet a variety of operational needs, the top and bottom threads can be customized according to site or equipment specifications. The coupling is typically manufactured from high-strength, corrosion-resistant materials and in compliance with industry standards such as API 5CT, ensuring it performs reliably under harsh downhole conditions.

Overall, the 6 7/8 x 4 1/2” Tubing Hanger Coupling is chosen for its ability to support larger bore wellhead designs while maintaining compatibility with standard tubing strings. It offers a dependable solution in completions where mechanical strength, pressure containment, and ease of assembly are priorities.

The Alligator Grab is a wireline fishing tool used to catch and retrieve loose or broken objects from inside an oil or gas wellbore. It has spring-loaded, serrated jaws that can be adjusted before use to set the right amount of grip for the object being retrieved. When downward force is applied, a pin shears, allowing the jaws to close and hold the object securely.

This tool is needed when small or hard-to-reach objects, often called “fish,” are stuck or floating in the wellbore. Unlike other retrieval tools, the Alligator Grab provides a controlled grip that can be adjusted to the size and type of object, reducing the risk of pushing it further down or damaging the well. It is not meant for heavy jarring once it has gripped an object, so it is used for careful and precise recovery.

The Alligator Grab comes in various sizes, with a maximum outside diameter of 1.25 to 3.50 inches, a fishing neck O.D. of 1.187 to 2.313 inches, and top connections ranging from 15/16-10 UN to 1-9/16-10 UN. It includes fishing necks and pin threads compatible with standard wireline equipment.

What makes this type of Alligator Grab unique is its ability to retrieve objects in tight or restricted wellbore spaces. Its adjustable jaws and compact size allow it to securely grip objects that other tools might not reach, making it especially valuable for precise and reliable recovery operations.

The 3” Tubing End Locator is a mechanical downhole tool used to identify the precise end of a 3-inch production tubing string during well intervention operations. It provides a clear physical indication when the tool reaches the bottom of the tubing, helping to ensure accurate placement of equipment inside the well.

Designed specifically for tubing with a 3-inch outer diameter, the tool features a maximum outside diameter of 2.500 inches. This sizing ensures smooth movement within the tubing while maintaining close contact, allowing the tool to operate effectively without the risk of sticking or misalignment. At the core of the design is a spring-loaded finger mechanism that extends outward when the tubing end is reached. This mechanical movement is transmitted to the surface as a tactile response, signaling that the tubing bottom has been contacted.

The tool includes standard threaded connections—such as a 15/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—which makes it compatible with a variety of toolstring configurations. It can be easily incorporated into slickline, wireline, or coiled tubing assemblies without the need for special adapters.

Constructed from durable, corrosion-resistant materials, the tubing end locator is built to perform reliably in downhole environments that involve high pressure, elevated temperature, and exposure to fluids. Its fully mechanical operation ensures a high level of dependability and minimizes the need for maintenance, especially in conditions where electronic systems may not be suitable.

The 3” Tubing End Locator is a practical solution for confirming tubing depth when preparing the well for further intervention.

The 5 Valve Manifold T Type, Pipe to Flange is engineered to connect impulse lines to differential pressure transmitters in industrial and oil and gas applications. It features 1/2” Female NPT Pipe to Flange connections set at 54mm (2-1/8”) centers, with a configuration consisting of two block valves, two equalizer valves, and one bleed valve. This design allows for efficient isolation, calibration, and maintenance of transmitters while maintaining process integrity.

The T Type configuration is especially useful because it provides a compact and organized valve layout that simplifies operations like bleeding and equalizing, reducing the risk of leaks and measurement errors. Using a 5 valve manifold ensures maximum operational flexibility, allowing operators to isolate the instrument, balance pressure, and vent safely without interrupting the main process.

Pipe to Flange connections are chosen when connecting transmitters or instruments to existing flanged piping systems, offering strong mechanical support and compatibility with industry-standard flanges. This combination of T Type, 5 valves, and pipe-to-flange connections ensures accurate, reliable, and safe pressure measurement and calibration in critical oil and gas operations.