Ballycatter.ca - Industrial Equipment

Tubing hanger with electrical feedthrough for ESP applications

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility. View Details

Storm Choke 4 inch K

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Telecom Battery

Designed for telecom applications; excellent ‘floor space savers’ for marine and vehicle applications The deep cycle AGM telecom series has been designed for use in telecom systems. With front access terminals and small footprint, the batteries are ideal for racked systems. Similarly, these batteries can help solve limited floor space and access problems on board boats and vehicles. AGM technology AGM stands for Absorbent Glass Mat. In these batteries the electrolyte is absorbed into a glass-fibre mat between the plates by capillary action. Low self-discharge Because of the use of lead calcium grids and high purity materials, Victron VRLA batteries can be stored during long periods of time without recharge. The rate of self-discharge is less than 2% per month at 20°C. The selfdischarge doubles for every increase in temperature by 10°C. Low internal resistance Accepts very high charge and discharge rates. High cyclic life capability More than 500 cycles at 50% depth of discharge. *data sourced from manufacturer. View Details

Broaching Tool Runs

InWaTec Combined: Precision Perfected with Our Broaching Tool Running Services In the complex tapestry of well service operations, precision is not just a goal—it's a necessity. At InWaTec Combined, we infuse this precision into every aspect of our work, especially when it comes to preparing wellbore tubing for subsequent interventions. Our Broaching Tool Running services epitomize this commitment, ensuring that wellbore tubings are in optimal condition for running or pulling service tools. The Critical Role of Broaching The wellbore is the heart of any drilling operation, and like any heart, it must be free from obstructions to function correctly. Enter the broach—InWaTec Combined’s answer to the industry's need for flawless tubing surfaces. Our broaching tools are engineered to meticulously remove metal burrs and imperfections that could jeopardize the integrity of service operations. By ensuring a clean and smooth tubing wall, we set the stage for efficient and trouble-free servicing. Advanced Broaching Technology Our broaching tools are not just tools; they are precision instruments. Equipped with graduated rings, diamonds, or segments, our broaches are case-hardened to withstand the rigors of the well environment. Their highly sharpened edges are designed to cut through imperfections with surgical precision, leaving behind a surface that meets the industry's highest standards. The InWaTec Combined Edge When you choose InWaTec Combined for broaching tool running services, you're not just getting a service; you're acquiring a partnership that values excellence. We understand that the quality of broaching directly impacts the success of your subsequent operations. That's why we've invested in developing a team of experts and a fleet of tools that stand unrivaled in quality and performance. Ensuring Success Down the Line Our broaching service is a critical precursor to a variety of downhole operations. By preparing your tubing with our broaching tools, you are ensuring that subsequent tools can be run or pulled with minimal risk of snagging or damage, thus preserving the integrity of your operations. This not only saves time but also reduces the likelihood of costly interruptions. Your Assurance of Quality At InWaTec Combined, our reputation is built on the back of our commitment to quality and precision. Our broaching tool running services are a testament to this promise. We don’t just deliver a service—we ensure that your wellbore is in the best possible condition for whatever comes next. In conclusion, with InWaTec Combined's Broaching Tool Running services, you can rest assured that the critical first step in your well servicing operations is in the most capable hands. Our precision tools and expert operators stand ready to deliver a seamless service experience that sets a solid foundation for your well's longevity and productivity. View Details

Environmentally Friendly Chemicals

At Cleanstream, we understand the importance of using safe, green and environmentally friendly chemicals for cleaning, de-rusting, and protecting any kind of reusable and/or precious objects and property. That's why we supply a range of pH-neutral, safe and innovative cleaning solutions that comply with environmental regulations and minimize the impact on the environment. Our products are designed to provide you with a reliable and efficient solution to your cleaning needs, while ensuring the safety of your staff and the environment. We offer a variety of solutions for cleaning, descaling and protecting metal tools, pipes, installations, boilers, heat exchangers, pump systems and more. Our solutions are effective, yet safe for hands, skin and the environment. In addition, we also provide strong solvents for cleaning sulphate deposits in geothermal, oil and gas wells, mid and downstream installations and systems. Our innovative acid substitutes are perfect for the stimulation of geothermal, oil and gas wells. What sets us apart is our commitment to providing green solutions that are also effective. Our products are certified to be environmentally friendly, effective and comply with all relevant regulations. Our certifications include CEFAS, HOCNF Certificate (Harmonized Offshore Chemical Notification Format), and REACH documentation (Registration, Evaluation and Authorization of Chemicals: European legislation for registration, evaluation and authorization of chemicals). At Cleanstream, we are proud to be your green partner in the industry. We continuously research and develop new and innovative products to provide the best and most efficient solutions for our clients while also ensuring the protection of the environment. Trust Cleanstream to provide you with safe, effective and environmentally friendly cleaning solutions. Contact us today to find out more about our products and services. View Details

TIG AC/DC 201 Pulse-D

Gauge Cutter

Enhancing Well Integrity with HOCA Oil Tools B.V.'s Slickline Gauge Cutters In the specialized field of oil and gas exploration and production, maintaining well integrity and efficiency is non-negotiable. At HOCA Oil Tools B.V., we are at the forefront of providing innovative solutions that cater to the complex needs of wellbore maintenance. Our comprehensive array of Slickline Gauge Cutters represents our commitment to excellence and precision, designed to tackle diverse challenges within the tubing string. Multi-functional and Versatile Applications: Our Rebco Type ‘A’ Gauge Cutters serve as multi-functional tools indispensable in the upkeep and maintenance of tubing strings. They are meticulously designed for removing paraffin, corrosion, and other foreign materials from the internal surface of the tubing, ensuring unimpeded flow and operational efficiency. The versatility extends to gauging and tagging obstructions, identifying and marking landing nipples, and preparing wells for the safe insertion of sub-surface controls. These applications underscore the critical role our gauge cutters play in well maintenance and diagnostics, emphasizing their value in operational planning and safety. Customizable Sizes for Precise Operations: Understanding the diversity of wellbore sizes and operational requirements, HOCA Oil Tools offers Gauge Cutters ranging from 1 inch to 7 inches in diameter. This extensive range ensures that all operational needs are met, from smaller interventions to large-scale maintenance tasks. Each gauge cutter can be customized to specific operational needs, ensuring that whatever the well condition or requirement, we have the right tool for the job. How to Order and Customization Options: Our ordering process is streamlined to ensure that you receive the gauge cutter that best suits your operational needs. Gauge cutters are ordered by part number, designated by the outer diameter to three decimal places, ensuring precision and compatibility with your specific well conditions. Additionally, we offer customization options for thread and fishing neck lengths, accommodating unique operational requirements and ensuring that our tools integrate seamlessly with your existing equipment. In conclusion, HOCA Oil Tools B.V. remains committed to providing the oil and gas industry with superior quality tools and customer service. Our Slickline Gauge Cutters are a testament to this commitment, offering unparalleled versatility, efficiency, and reliability in wellbore maintenance operations. Choose HOCA Oil Tools for your downhole needs, and experience the difference that quality, innovation, and precision can make in optimizing your well performance View Details

Lamp KL5MS 1.65

Enhance Your Mining Operations with Wisdom's KL5MS Corded Miner's Cap Lamp from Provix Provix is proud to introduce the Wisdom KL5MS Corded Miner's Cap Lamp, a top-tier lighting solution engineered to meet the rigorous needs of the mining industry. Combining advanced technology with user-focused design, the KL5MS ensures both safety and efficiency for miners under the most challenging conditions. Powerful and Efficient Illumination The KL5MS boasts a high-capacity 7,800mAh battery, delivering a continuous discharging time of 13 hours. It features a main light LED with a working voltage of 3.0V, current of 640mA, and power of 1.92W. This efficient configuration provides a luminous flux of 340 lm, along with an impressive initial lighting degree of 18,000 lx at 1 meter, ensuring excellent visibility in dark mining environments. Durability and Longevity Designed for the long haul, the KL5MS has a main light life span of 50,000 hours and an auxiliary light life span of 40,000 hours. The battery's life span extends to 1,200 cycles under normal working conditions, underscoring the lamp's reliability and long-term performance. Safety as a Priority Safety is paramount in mining, and the KL5MS is crafted with this in mind. It is explosion-proof, adhering to ATEX GROUP II standards, and has an IP68 waterproof rating. Additionally, the lamp features a short circuit protection time of less than 320 μs, further enhancing its safety profile. Ergonomic Design for Comfort The KL5MS is designed with the comfort of the miner in mind. Weighing just 550g (19.40 oz) and with a main cable length of 1.65 meters (5.41 feet), it offers ease of use and mobility. The compact dimensions of the battery box (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure that it is not cumbersome during extensive use. Quick and Convenient Charging With a charging time of just 4 to 7.5 hours, the KL5MS is ready for use quickly, reducing downtime and enhancing productivity. The USB charging feature adds an extra layer of convenience, allowing for easy charging in various settings. Get Yours Today Upgrade your mining gear with the Wisdom KL5MS Corded Miner's Cap Lamp for improved visibility, safety, and efficiency. Contact Provix for more information, visit our website at www.provix.net, or come see us in person. The Wisdom KL5MS is your key to safer, more efficient mining operations. View Details

G Compression set Retrievable Packer

The G™ packer is an economical, compression-set packer, intended for lower pressure production applications. It is set by one-quarter-turn right-hand rotation. Release is accomplished by straight pickup of the tubing. If it is necessary to move the packer further downhole after release, one-fourth-turn left-hand rotation will put the tool back into the running position. C-1 Single Grip Invertible Packer The C-1™ packer can be run as a conventionally set packer or, when run upside down, it can be set in compression. Emergency releases are provided for tension and compression operations. View Details

Junk Basket - Valve Catcher

Magic Weld 150A Welding Machine and Generator

Introducing the MAGIC WELD 150: Unleash the Power of Portability and Performance! At Canaweld, we understand the challenges welders face on-site and in the field. That's why we're proud to present the MAGIC WELD 150 - the perfect fusion of welding capabilities and generator portability, designed to revolutionize your welding experience. Powerful Performance in a Lightweight Package The MAGIC WELD 150 is a true marvel in its class, offering a remarkable 150-Amp DC Stick welder with an outstanding Honda GX 200 four-stroke engine. This dynamic combination ensures a powerful and steady arc, empowering you to tackle any welding task with ease and precision. Designed for Everyday Use Built for welders who demand the best, the MAGIC WELD 150 is engineered for everyday use as a welder. Its sturdy construction and high-frequency voltage control guarantee smooth welding with all types of electrodes, including cellulosic electrodes, making it a versatile tool for various welding applications. Portability Meets Efficiency Weighing in at just 75 lbs. (34 Kg), this lightweight powerhouse is your go-to companion on-site and around the farm. The 150A in 60% duty cycle ensures consistent performance, while the auto idle feature increases fuel efficiency and extends the engine's lifespan, saving you valuable time and resources. Power Optimizer Function - Your Safety, Our Priority With safety at the forefront, the MAGIC WELD 150 is equipped with a "Power Optimizer" function, a special feature patented by MOSA. This innovative technology prevents engine overload when working near its power limit, offering you peace of mind while you work. Unmatched Certifications and Regulations Rest assured, the MAGIC WELD 150 is CE certified, meeting the highest standards of quality and safety. Its engine complies with U.S. EPA and California EXH/EVP SORE Regulations, making it an eco-friendly and responsible choice. Elevate Your Welding Experience with MAGIC WELD 150 Empower yourself with the MAGIC WELD 150 and experience the unmatched fusion of welding capabilities and generator portability. Take control of your welding tasks like never before and unleash the magic of precise and efficient welding on the go. Canaweld - Your Partner in Portability and Performance At Canaweld, we take pride in providing welding machines and accessories designed to meet the unique needs of welders in the oil and gas industry. The MAGIC WELD 150 embodies our commitment to excellence and innovation, and we are excited to offer you this game-changing welding solution. Unlock the magic of welding prowess and unparalleled portability with the MAGIC WELD 150. Your welding success awaits! Canaweld - Empowering Your Welding Journey! View Details

Double Block & Bleed Valve – Flange x Flange – Ball Isolation with Needle Drain – 3/4” (DN 20) – Class 150 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve Flange x Flange 3/4” (DN 20) with Ball isolation and Needle drain provides dual isolation in oil and gas piping systems. The first ball isolates upstream flow while the second ball isolates downstream flow. The needle drain vents trapped pressure between the two isolation points, making it suitable for instrument or gauge isolation, chemical injection, or sampling in operations where maintenance or measurement is required without interrupting the main process.

This specific 3/4” (DN 20) valve is rated for Class 150 service. It has a flange diameter of 100 mm, a bore of 69.9 mm, a flange thickness of 15.9 mm, and uses four bolts of 1/2” size. The face-to-face length is 203 mm. It is manufactured from materials compatible with oil and gas environments and meets ASME B16.34, API 6D, and ISO 17292 standards for pressure-temperature performance and reliability.

View Details

Ambient 4-1/2 inch SSSV

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

High Torque Super Spooler Unit

The Super Spooler SUHT-25-2415 is designed for the heaviest of spooling loads in the most adverse conditions. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

D6 Bulldozer

POWER TRAIN Fully-automatic 4-speed transmission Cat C9.3B diesel engine Double reduction planetary final drives Hydraulic reversing fan OPERATOR ENVIRONMENT Fully redesigned cab, sound suppressed, with Integrated Roll Over Protective Structure (ROPS) Full-color 10-inch (254 mm) liquid crystal touch screen display Integrated rearview camera Adjustable operator controls/armrests Cab mounted modular Heating/Ventilation/Air Conditioning (HVAC) system Added storage areas Electrohydraulic implement and steering controls Cloth seat Lights - 6 LED CAT TECHNOLOGY Slope Indicate Product Link, Cellular Grade Control Ready Cab Remote Control Ready Remote Flash/Remote Troubleshoot Operator ID Machine Security - Passcode Compatibility with radios and base stations from Trimble, Topcon, and Leica Capability to install 3D grade systems from Trimble, Topcon, and Leica UNDERCARRIAGE Redesigned track roller frame SERVICE AND MAINTENANCE Rear access ladder Shovel holder Ground level service center 30-minute cab removal Fire extinguisher mounting provision Ecology drains Underhood work light HYDRAULICS Independent steering and implement pumps Load sensing hydraulics ATTACHMENTS Ripper-ready rear hydraulics View Details

Control Room Wireless Links

Amplifying Control Room Capabilities through Robust Wireless Links by Nulux Network Solutions In the thriving pulse of the oil and gas industry, where operational precision and data integrity are pivotal, control rooms emerge as the neural centers orchestrating myriad operations with absolute finesse. At Nulux Network Solutions, we understand the paramount importance of seamless, secure, and robust communication for control rooms, ensuring that your operational harmony remains undisturbed amidst the cacophony of challenges posed by distance, terrain, and environmental factors. Nulux’s Control Room Wireless Links – Ensuring Uninterrupted Operative Symphonies Navigating through the technological and operational challenges, Nulux’s Control Room Wireless Links ensure that your data – the critical nerve of decision-making processes – travels seamlessly across the challenging terrains and distances, bridging your control room with the various operational nodes dispersed across diverse geographic locales. Wireless Connectivity – The Nulux Difference Our wireless solutions are meticulously crafted, ensuring: Seamless Connectivity: Bridging the communication gaps through point-to-point and multipoint configurations, tailored to meet your unique operational dynamics and challenges. Enhanced Reliability: With proven expertise in implementing robust wireless systems, we ensure that your control room is always in sync with the on-field operations, mitigating downtimes and enhancing decision-making processes. Optimized Cost-Effectiveness: Deploying wireless links that negate the need for extensive hardwired infrastructures, thereby ensuring that your operational efficiencies are not burdened by exorbitant capital expenditures. Intricate Comprehension of Wireless Technologies At Nulux, we prioritize understanding the subtle nuances and stark distinctions in wireless technologies, ensuring that your control room wireless links are not just communicatively optimal but are also operationally coherent. Point-to-Point Networks: Ensuring a dedicated, secure, and high-capacity data transmission channel between your control room and a fixed operational point. Multipoint Configurations: Crafting a network where the control room can communicate with multiple operational points through a single, secure, and reliable wireless channel. Safeguarding Your Data with Nulux In a world where data integrity and security are not mere necessities but vital operational prerequisites, our Control Room Wireless Links are fortified with robust security protocols, ensuring that your operational data is shielded from potential cyber threats, thereby facilitating a secure, reliable, and efficient operative environment. Engage with Operational Excellence Embark on a journey towards enhanced operational efficiencies with Nulux, where your control room is not just a strategic point but is the dynamic conductor of an orchestrated operational symphony. Our wireless links ensure that every note, every data point, is communicated, analyzed, and acted upon with absolute precision, ensuring that your operations resonate with reliability, efficiency, and absolute excellence. Unleash the true potential of your control room, ensuring that every decision, every action is backed by real-time data, secured communication, and the robust reliability of Nulux’s Control Room Wireless Links. Let’s sculpt an operational future where your decisions echo across the vast expanses of your operations, where your actions are timely, and where your control room truly controls, manages, and orchestrates your operational symphony with unmatched precision and reliability. Navigate with Nulux, where your pathways are not just connected but are securely, reliably, and efficiently interlinked. View Details

Tube Fittings Male Connector ISO Tapered Thread – 1/8”, 5/16”, 3/8”, 1/2”, 3/8”, 1/2" – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Tube Fittings Male Connectors are precision parts used to connect tubing directly to a threaded port in oil and gas systems. One side of the connector is designed for tubing, while the other side has an ISO tapered male thread that screws into valves, manifolds, pumps, or other equipment.

These connectors are made for high-pressure applications, with working pressure ratings up to 6000 PSI. The tapered thread design creates a tight, reliable seal that prevents leaks of gas or liquid, even under vibration, temperature changes, or fluctuating pressures.

They are commonly used in drilling rigs, wellhead equipment, hydraulic control lines, instrumentation systems, and process piping. Available sizes include 1/8”, 5/16”, 3/8”, and 1/2”, making them suitable for a wide range of tubing diameters.

By ensuring a strong, leak-free connection, Tube Fittings Male Connectors improve safety, reduce downtime, and support efficient operation in demanding oil and gas environments.

View Details

Pneumatic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Surface Heater

Custom buoyancy options for color, depth rating, and covering area

Unleashing the Power of Custom Buoyancy Units for Subsea Robotics We are driven by a passion for innovation and a commitment to empowering the subsea exploration industry. Today, we are thrilled to introduce our latest breakthrough - Custom Buoyancy Units. These state-of-the-art buoyancy solutions are designed to enhance the performance and versatility of your subsea robotics, delivering unparalleled control and efficiency in every underwater mission. Tailored to Your Needs: Custom Buoyancy Options We understand that no two subsea missions are the same, and that's why our Custom Buoyancy Units offer a world of possibilities to cater to your specific requirements. From the color and depth rating to the covering area, you have the flexibility to customize every aspect of the buoyancy units, ensuring they align perfectly with your operational needs. Color Customization for Enhanced Visibility In the challenging depths of the ocean, visibility is paramount. Our Custom Buoyancy Units can be tailored in vibrant colors to improve visibility and tracking during underwater operations. Whether you need to differentiate between multiple ROVs in the water or simply want to enhance visual identification, our color options offer the solution you need. Optimal Depth Rating for Any Mission Every subsea mission comes with unique depth challenges. With our Custom Buoyancy Units, you have the power to choose the optimal depth rating that suits your specific application. From shallow-water surveys to deep-sea explorations, our buoyancy solutions are engineered to withstand the pressures of varying depths, ensuring your ROVs perform at their best. Covering Area: Precision Engineering for Stability Stability is crucial in subsea operations, and our Custom Buoyancy Units are meticulously designed to provide the perfect covering area for your ROVs. Through precision engineering and advanced materials, we offer buoyancy units that maintain the ideal balance between buoyancy and stability, resulting in smoother and more controlled underwater movements. Redefining Subsea Robotics As pioneers in subsea robotics, we continues to push the boundaries of innovation. With our Custom Buoyancy Units, we are reshaping the future of underwater exploration. By putting the power of customization in your hands, we enable you to unlock the full potential of your ROVs and achieve new heights in subsea missions. Unleash Your ROV's Potential Discover the limitless possibilities that await your subsea robotics with Custom Buoyancy Units. Elevate your underwater operations, optimize your ROV's performance, and gain an edge in your field with our cutting-edge buoyancy solutions. Contact Us Today Take the first step towards transforming your subsea missions with Custom Buoyancy Units. Our team of experts is ready to assist you in tailoring the perfect buoyancy solution for your unique needs. Embrace the power of customization and embark on a new era of subsea exploration with Ballycatter as your trusted partner. Contact us today to unlock the true potential of your subsea robotics. View Details

Field-bus Cabling

Harmonizing Field Operations with Nulux Network Solutions: Elevating Field-bus Cabling in the Oil and Gas Sector The labyrinthine networks of the oil and gas industry necessitate not only precise and accurate communication but also a robust data transfer pathway that remains unflinchingly reliable amidst the operationally intense environments. Nulux Network Solutions, seasoned with two decades of expertise, introduces meticulous and operationally integral Field-bus Cabling Solutions. Why Nulux Shines in the Networking Cosmos When your business demands a network infrastructure that serves as an impervious and ever-reliable backbone, the bespoke solutions provided by Nulux ascertain that your operations remain perennially seamless. Our extensive experience spans myriad industrial projects, including crucial DCS network upgrades across North America, establishing us as a linchpin in telecommunication and networking sectors. Championed by a team devoutly centered around unyielding perfectionism, Nulux not only provides but enhances copper cabling systems, ensuring they are not merely conduits but formidable and resolute pathways for your data to traverse through. Crafting Copper Networks with Nuanced Precision At Nulux, our copper network services are not confined to mere installation but envelop a 360-degree solution space that guarantees: Meticulous design, planning, and installation of new/existing networks Strategic upgrades to bolster operational efficiency Bespoke solutions catering to voice, data, and video services Tailored approaches meeting your distinct requirements Sustained technical support across your project’s lifecycle Copper, as a medium, brings forth myriad benefits to your network infrastructure, including high-bandwidth transmission (up to 10 Gbps), pronounced reliability, effortless installation, cost-effectiveness, and the inherent flexibility, reliability, and durability essential for operationally intense industries. Nulux’s Field-bus Cabling Solutions: A Nexus between Technology and Operational Excellence Your field-bus networks are not mere communication channels but the vital sinews that link your operational components into a cohesive and synchronous unit. Nulux’s Field-bus Cabling solutions are meticulously crafted, ensuring: Operational Harmony: Linking your diverse field devices and controllers into a synchronized operational entity Data Integrity: Ensuring data packets traverse through your networks with fortified security and integrity Reduced Downtime: Minimizing operational disruptions through a reliable and constant communication channel Enhanced Diagnostics: Facilitating real-time data transfers that enable precise control and diagnostics Scalability: Providing a network that evolves in tandem with your operational expansions and technological integrations Entrust Your Operations with Nulux In the relentless and unforgiving operational theatres of the oil and gas industry, where every byte of data is pivotal, Nulux’s Field-bus Cabling Solutions stand as a silent sentinel ensuring your operations are perpetually communicated, coordinated, and controlled with unyielding reliability. With an in-depth understanding of what truly fuels operational competitiveness in your industry, our hard-working team assures that while you steer your focus towards your core operations, your field-bus network functions as an unwavering, steadfast, and efficient data highway. Invigorate your operations with Nulux Network Solutions, ensuring every device, controller, and operational node in your field is perpetually in symphony, dictating a future where your operations and network are in seamless unison. Reach out to Nulux Network Solutions for an initial consultation and begin a journey where your field-bus network becomes a catalyst for operational excellence and reliability. View Details

ESP Disassembly Bench

Are you in need of a high-quality disassembly bench for the teardown and inspection of electric submersible pumps? Look no further than Sivam! We're proud to offer a range of disassembly benches that are specifically designed for the inspection and maintenance of ESP's. Our benches are built from the highest quality materials and are engineered to provide exceptional durability and reliability, ensuring that your team can work safely and efficiently. At Sivam, we understand the importance of precision and accuracy when it comes to maintaining critical equipment like ESP's. That's why our disassembly benches are designed to provide a stable and secure platform for teardown and inspection, with features like adjustable height for a level working surface to ensure maximum convenience and ease of use. But that's not all - our disassembly benches also come equipped with a range of additional features to help your team work more efficiently. From built-in cages to customizable work surfaces, our benches are designed with your team's needs in mind. At Sivam, we're committed to providing our customers with the highest level of quality and customer service. That's why we work closely with our clients to understand their specific needs and design benches that meet their exact specifications. So if you're in need of a high-quality disassembly bench for the inspection and maintenance of ESP's, choose Sivam. Contact us today to learn more about our products and services and to find out how we can help take your operations to the next level! View Details

9 5/8" Mech-2 Double Grip Mechanical Set Packer for 47-53.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

HP-3 Hydraulic Set High Angle 5 1/2" 13-15.5 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

MIG/STICK 221 Welding Machine

Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level. View Details

Wifi Setup

Revolutionizing Wireless Connectivity in the Oil and Gas Industry with Nulux Network Solutions In an era where instant and reliable connectivity is paramount, especially in the meticulous domain of the oil and gas industry, seamlessly integrated wireless networks are not a luxury but a necessity. Navigating through the intricate operational matrices and colossal data, Nulux Network Solutions proffers unparalleled WiFi setup services, ensuring your wireless connectivity is robust, reliable, and resilient. Nulux: A Vanguard in Wireless Solutions Through our profound expertise in devising wireless systems and infrastructure, Nulux has become synonymous with impeccable wireless communication links. Whether it’s through point-to-point or multipoint radio networks, tower construction/rigging, or mesh networks, our dedicated team ensures that geographical and physical impediments become inconsequential in your communication and data transmission endeavors. Wi-Fi Access Points: A Linchpin of Operational Efficacy Navigating through bustling work environments in the oil and gas sector necessitates the deployment of wireless networks that are not only widespread but also impeccable in terms of performance and reliability. With Nulux’s unparalleled experience in the design and deployment of wireless networks, seamless connectivity transcends your office and permeates every corner of your operation - whether it be the warehouse, facility floor, or field sites. Deciphering Point to Point and Multipoint Configurations In the context of wireless networking: Point to Point (P2P) networks furnish a direct linkage between two nodes, ensuring streamlined communication and data transmission between them. This configuration, touted for its enhanced security, due to the dedicated nature of the connection, and increased productivity, ensures your data travels securely and uninhibited from one point to another. Multipoint configurations, on the other hand, establish a connection amongst more than two points, with a single line shared amongst multiple nodes. This configuration can be particularly beneficial in scenarios that demand centralized data access across various points. The Nulux Promise: Connectivity Beyond Boundaries Tethering on our commitment to ensuring your operations are perpetually connected and data transmissions are ceaselessly secure and reliable, our WiFi setup services promise: Ubiquitous Connectivity: Ensuring every node, regardless of its geographical positioning, is perpetually connected. Robust Security: Safeguarding your data transmissions against potential cyber threats and ensuring they traverse through a secure network. Operational Efficiency: Through our WiFi setups, we ensure your operational matrix, be it documentation review, QA-QC, or project planning, is continually enhanced and refined. Cost-Effective Solutions: Ensuring your wireless network, whether it be a point to point or multipoint configuration, is not only operationally beneficial but also financially viable. In the intricate and operationally critical realm of the oil and gas industry, ensuring your wireless connectivity is not only robust but also reliable and secure, is paramount. With Nulux Network Solutions, you’re not merely adopting a WiFi setup; you’re embedding a network that promises operational excellence, secure data transmissions, and an enhanced operational matrix. Connect with Nulux today and ensure your operations are always connected, your data transmissions always secure, and your wireless network is always reliable. View Details

LM2500+ Gas Turbine

The LM2500+ gas turbine delivers increased power and improved efficiency by building on the proven LM2500 platform. Designed to meet the demanding needs of industrial and offshore operations, it offers a compact, reliable solution for power generation and mechanical drive applications.

The LM2500+ enhances the original LM2500 design by adding a 17-stage high-pressure axial compressor. This additional compressor stage increases airflow and raises the engine’s pressure ratio, resulting in roughly 20% more power output. The turbine uses a ring combustion chamber with advanced dry low emissions (DLE) technology, producing very low levels of NOx and CO emissions to meet strict environmental standards.

A key feature of the LM2500+ is its low-speed turbine section, which is specifically designed for offshore platforms and other space-restricted environments. This turbine’s compact size and modular design allow for easy maintenance, with split compressor casing and in-place blade replacement that reduce downtime and operational complexity. The turbine is factory-tested and pre-wired for straightforward installation, supporting both 50 Hz and 60 Hz power generation without the need for additional equipment like reducers.

Operators benefit from the LM2500+’s enhanced power and fuel efficiency, which help reduce operational costs and improve performance in applications such as combined heat and power systems, industrial power generation, underground gas storage, and gas pipelines. Its modular, space-saving design fits well in offshore installations where size and weight are critical factors.

the LM2500+ ensures continuous performance and maximizes uptime, making it a trusted solution for critical power needs across various industrial and offshore applications.

View Details

Lead Impression Block

Plug with Removable Mandrel

ESP 9 5/8” Production Packer

Electrical Submersible Pump Packer

A downhole Electric Submersible Pump (ESP) Packer for a 9 5/8” casing is a critical component in artificial lift systems, designed to provide a secure, pressure-tight seal between the tubing and casing while allowing the electrical cable to pass through to the ESP. Here’s how it works:

1. Hydraulic-Set, Dual-Bore Design

This single-mandrel, dual-bore packer is hydraulically set by applying fluid pressure through the tubing. This eliminates the need for mechanical manipulation, making it an effective choice for deviated or high-angle wells where mechanical setting might be challenging.

• The dual-bore design incorporates a dedicated pass-through bore, allowing the power cable to run from the surface, through the packer, and down to the ESP below.

• This configuration enables uninterrupted power delivery to the pump while maintaining zonal isolation in the wellbore.

2. Bi-Directional Slip System for Secure Anchoring

Once hydraulic pressure is applied, the case-carburized bi-directional slips engage against the casing wall.

• These slips are hardened to withstand high loads and anchor the packer firmly in place to resist both upward and downward forces caused by reservoir pressure fluctuations and ESP-induced pressure differentials.

• This ensures that the packer remains securely in position, preventing unintended movement during production or shutdown cycles.

3. Versatile Release and Retrieval Mechanism

When it’s time to retrieve or replace the ESP system, the packer features a flexible release system:

• The standard retrieval method involves applying a straight upward pull on the tubing, which disengages the slips and allows the packer to be removed.

• Alternatively, for applications where higher retrieval forces might be impractical, a cut-to-release option is available, enabling efficient removal in more challenging well conditions.

Operational Advantages

• Reliability in High-Load Applications: Designed to handle the extreme downhole conditions associated with ESP operations, including high fluid flow rates and pressure fluctuations.

• Adaptability to Various Completion Designs: The dual-bore configuration accommodates different ESP setups and cable-routing requirements.

• Efficiency in ESP Deployment: By securely isolating production zones while allowing cable pass-through, the packer streamlines the ESP installation process and enhances system integrity.

This ESP packer plays a vital role in ensuring reliable artificial lift performance, particularly in deep or high-pressure wells where stable downhole conditions are essential for maximizing production efficiency.

View Details

10-3/4 Annulus Safety Valve

The AV annulus safety valve is a fully retrievable high performance annulus safety system packer with integral annulus safety valve. The system provides annular bypass through a hydraulically operated poppet valve. The AV system is run in a single trip in conjunction with a setting sub that can be shifted for hydraulic tubing-set or can be alternatively control-line set from surface. Applications The AV system is used for controlling annulus fluids in gas lift applications, monitoring of annulus pressures in critical situations, and in one- or two-trip annulus safety system completions. The completion can be run to depth and set with the surface tubing hanger flanged up. It can also be used in completions in which spacing out against a subsurface tubing hanger is required (i.e., no elastomeric expansion joint necessary). The tailpipe can be left in either tension or compression. The system can be used where high tensile loads and pressure differentials exist with the completion anchored in unsupported or poor condition casing. Features » Interlock system prevents preset » Tubing test facility while running » Hydraulically set in one trip on tubing with no mandrel movement » Annulus-mounted release mechanism » Internal/external components rotationally locked together » Element anti-extrusion system » One-trip system allows multiple control-line bypass » Premium thread connections — no elastomeric seals tubing to annulus » Primary release method is applied tubing pressure using dedicated punch release tool on slickline » Secondary release method available with simple tubing cut *information collected from manufacturer literature View Details

Needle Valves Hex Body Series – Female x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Hex Body Needle Valves Female x Female are precision valves designed for accurate flow control and isolation in piping systems. The hexagonal body allows for easy installation and secure tightening using a standard wrench. Both ends have female threads, enabling direct connection to male-threaded pipes or fittings without additional adapters.

These valves are suitable for high-pressure and high-temperature applications, with a standard working pressure of 6000 psi and temperature ratings from -50°C to 230°C, extendable up to 500°C with graphite. They are commonly used in oil and gas, instrumentation, and process control systems to regulate fluid or gas flow, perform system bleed operations, or isolate sections of a pipeline.

The valves feature a metal-to-metal body and bonnet seal for durability, a self-centering non-rotating stem tip for consistent shutoff, and packing located below the threads to prevent process media from reaching the threads. Factory-tested for seat and packing leakage, these valves provide reliable, leak-free performance in demanding environments.

View Details

TIG Torch 200 AMP Gas Valve Air Cooled (26 series)

Unleash Precision Welding with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series)! For the oil and gas industry, precision welding is not just a requirement; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our TIG Torch 200 AMP Gas Valve Air Cooled (26 Series) is a testament to our commitment to excellence and innovation. Unmatched Flexibility: When it comes to hard-to-reach applications, our TIG Torch 200 AMP is the ultimate solution. The torch body can be bent to virtually any position, ensuring quick and easy access to even the most difficult positional welds. No more struggling with tight spaces; our torch provides unmatched flexibility, making precision welding a breeze. Revolutionary Cooling Technology: We've harnessed the power of Force Cooling Technology to maximize the performance and longevity of our torch. Highly effective passages and wells force cool the collet, resulting in a cooler running torch with increased conductivity and extended consumable life. Weld with confidence, knowing that our torch can handle even the most demanding applications. Heat Zone Isolation for Superior Performance: Our torch employs Heat Zone Isolation Technology, where transferred heat is isolated by a unique external barrier. Conducted heat is further isolated using large air pockets within the torch body structure. The result? Cooler running torches with increased power to weight performance ratios. Experience welding at elevated power levels without compromising performance. Superior Wear Parts for Increased Arc Time: Every component of our torch is designed for superior performance, delivering increased arc time and lower overall production costs. From push-on/easy grip ceramics to one-piece collet/collet body for hassle-free use, our torch ensures 100% ceramic and electrode alignment with the Heat Zone Isolator. Optional large gas lens increases the gas envelope for even more efficiency. Advanced Torch Bodies and Back Caps: Experience a step-change in performance levels with our torch bodies and back caps. Our revolutionary cooling and heat zone isolation techniques result in cooler running torch bodies at elevated power levels. These cooler running components increase wear parts' life expectancy, giving you an edge in productivity. Key Benefits for Enhanced Performance: • Utilizes air gap technology for cooler running handles • Hard and soft material elements for an effortless grip • Infinite adjustment of welding parameters from the torch handle • Optional integrated handle readout displays all welding and machine parameters in "real-time" Clever Cable Systems for Optimal Efficiency: Our cable systems are cleverly designed to combine flexibility, durability, and top-notch performance. Rapid fit and modular rear-end systems ensure easy reconfiguration of power input, gas hose, and control lead terminations. Superior-grade rubbers guarantee cable termination integrity and hose package longevity, tested to withstand over 1 million flexes. Elevate Your Welding Experience: Experience the difference with Canaweld's TIG Torch 200 AMP Gas Valve Air Cooled (26 Series). Achieve precision welding with ease, no matter how challenging the application. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. When it comes to welding, choose Canaweld for the ultimate in quality, flexibility, and performance. Elevate your welding experience and take your oil and gas projects to new heights of success with Canaweld's cutting-edge welding accessories. View Details

TIG AC/DC 301 Pulse Welding Machine

Utility Backup Operators

3” Tubing End Locator

The 3” Tubing End Locator is a mechanical downhole tool used to identify the precise end of a 3-inch production tubing string during well intervention operations. It provides a clear physical indication when the tool reaches the bottom of the tubing, helping to ensure accurate placement of equipment inside the well.

Designed specifically for tubing with a 3-inch outer diameter, the tool features a maximum outside diameter of 2.500 inches. This sizing ensures smooth movement within the tubing while maintaining close contact, allowing the tool to operate effectively without the risk of sticking or misalignment. At the core of the design is a spring-loaded finger mechanism that extends outward when the tubing end is reached. This mechanical movement is transmitted to the surface as a tactile response, signaling that the tubing bottom has been contacted.

The tool includes standard threaded connections—such as a 15/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—which makes it compatible with a variety of toolstring configurations. It can be easily incorporated into slickline, wireline, or coiled tubing assemblies without the need for special adapters.

Constructed from durable, corrosion-resistant materials, the tubing end locator is built to perform reliably in downhole environments that involve high pressure, elevated temperature, and exposure to fluids. Its fully mechanical operation ensures a high level of dependability and minimizes the need for maintenance, especially in conditions where electronic systems may not be suitable.

The 3” Tubing End Locator is a practical solution for confirming tubing depth when preparing the well for further intervention.

View Details

Alligator Grab Wireline Fishing Tool – 1.25”, 1.50”, 1.85”, 2.25”, 2.81”, 3.50” O.D. – Adjustable Jaw Pressure

The Alligator Grab is a wireline fishing tool used to catch and retrieve loose or broken objects from inside an oil or gas wellbore. It has spring-loaded, serrated jaws that can be adjusted before use to set the right amount of grip for the object being retrieved. When downward force is applied, a pin shears, allowing the jaws to close and hold the object securely.

This tool is needed when small or hard-to-reach objects, often called “fish,” are stuck or floating in the wellbore. Unlike other retrieval tools, the Alligator Grab provides a controlled grip that can be adjusted to the size and type of object, reducing the risk of pushing it further down or damaging the well. It is not meant for heavy jarring once it has gripped an object, so it is used for careful and precise recovery.

The Alligator Grab comes in various sizes, with a maximum outside diameter of 1.25 to 3.50 inches, a fishing neck O.D. of 1.187 to 2.313 inches, and top connections ranging from 15/16-10 UN to 1-9/16-10 UN. It includes fishing necks and pin threads compatible with standard wireline equipment.

What makes this type of Alligator Grab unique is its ability to retrieve objects in tight or restricted wellbore spaces. Its adjustable jaws and compact size allow it to securely grip objects that other tools might not reach, making it especially valuable for precise and reliable recovery operations.

View Details

HDI 2200 Choke Position Indicator System

The HDI 2200 Choke Position Indicator System is a battery-powered, intrinsically safe solid-state electronic gauge designed to monitor choke valve positions in oil and gas operations with high accuracy. It displays choke position in 1% increments from fully closed to fully open (0% to 100%) using a three-digit numeric readout alongside an analog bar graph segmented into 101 divisions for both precise measurement and quick visual trend analysis.

The system interfaces with linear, rotary, or retractable potentiometers housed in stainless steel enclosures. This flexibility allows for straightforward adaptation across many choke configurations without the need for onsite customization. The sealed stainless steel housing and solid-state electronics enable the 2200 to operate reliably in harsh field conditions, including high vibration environments typical in land and offshore drilling.

Its compact display unit measures approximately 8 by 8 by 4 inches and weighs around 5 pounds. The system is powered by an intrinsically safe 3.6V DC battery pack, with a low battery indicator to ensure timely maintenance and uninterrupted operation. Field-repairable components minimize downtime and allow for easy servicing. The system supports dual sensors for integration with human-machine interfaces (HMI) or programmable logic controllers (PLC), enabling remote monitoring and automation. The 2200 system replaces traditional pneumatic indicators, eliminating the need for air lines and reducing maintenance complexity, while offering a simple calibration interface to facilitate setup and ongoing adjustments.

View Details

Bag Oil Spill Kit

SEM SDR Rust Remover

Introducing SEM SDR Rust Remover, the revolutionary rust removal technology that is changing the game in the steel industry. Developed from proven nuclear industry and engineering pre-commission operations, this water-based, safe and non-toxic product is flexible and effective on all grades of steel. SEM SDR Rust Remover is unlike any other rust removal product on the market. With a neutral pH and non-corrosive properties, it is safe for use on all steels, metals and engineering polymers. When used as directed, SEM SDR effectively removes all rust to leave behind a super clean, virgin metal surface. What sets SEM SDR apart is its ability to impart a degree of corrosion resistance to the treated surface. This helps to prevent flash rusting after cleaning, providing long-lasting protection for your valuable assets. To ensure the best results, it is recommended to degrease the metal surface before treatment with SEM SDR. This can easily be achieved with a surfactant or wash. Don't settle for less when it comes to rust removal. Choose SEM SDR Rust Remover and experience the power of advanced technology and superior results. View Details

DCS infrastructure Technical Support

Navigating Through Technological Challenges: Nulux Offers Unparalleled DCS Infrastructure Technical Support In the fastidious realm of the oil and gas industry, a well-oiled Distributed Control System (DCS) isn’t just an ancillary asset; it’s the digital backbone supporting the streamlined operations, analytical assessments, and safety protocols so critical in such a challenging environment. With Nulux Network Solutions at your helm, not only is your DCS infrastructure skillfully designed and implemented, but its continual functionality is upheld through our impeccable technical support. Nulux: A Beacon of Robust Networking in the Industrial Sector With a prestigious track record of over two decades, Nulux Network Solutions spearheads the industry in telecommunication and networking solutions. We’ve diligently crafted, upgraded, and meticulously maintained a myriad of copper cabling systems, including telephone, ethernet, coax, and hybrid networks, to ensure your industrial projects always remain a step ahead technologically. Our specialization extends beyond mere installation and permeates every aspect of network management, providing you a comprehensive turnkey solution. With our eyes fixed on providing unparalleled service quality, we've carved our niche, particularly in upgrading and maintaining DCS networks, proving time and time again that when it comes to networking, we're a name you can trust. Technical Support that Speaks Volumes We don’t just stop at providing you a stellar DCS infrastructure; our technical support is always at your beck and call, ensuring that your network runs seamlessly, uninterrupted, and continues to facilitate operational excellence. Here’s how our Technical Support stands apart: 24/7 Availability: In an industry that never sleeps, our technical support is available round the clock, ensuring that help is always a call away. Expert Troubleshooting: With a team adept in diagnosing and resolving issues swiftly, any disruptions are promptly addressed, minimizing downtime and keeping your operations in perpetual motion. Life Cycle Management: From planning and implementation to upgrades and maintenance, our support encompasses every phase, ensuring your DCS infrastructure continually evolves and aligns with technological advancements. Tailored Solutions: Understanding that no two networks are identical, our solutions are customized, catering to the specificities of your DCS infrastructure, providing targeted, effective, and efficient support. Why Our Copper Network Reigns Supreme Our copper network doesn’t just promise high-bandwidth transmission and long-term reliability; it assures your DCS infrastructure is equipped with a network that is inherently: Cost-Effective: Ensuring you don’t have to compromise quality for cost. Flexible and Durable: Capable of withstanding the demanding operational environment and evolving in tandem with your expanding needs. Easily Terminated: Allowing for swift modifications and expansions as per operational demands. Ensuring Your Success is Uninterrupted with Nulux In the multifaceted world of the oil and gas industry, ensuring that your business is equipped with an unshakeable DCS infrastructure, backed by an unwavering support system, isn’t just beneficial; it’s quintessential. With Nulux Network Solutions, you’re not merely adopting a network; you’re embracing a partnership where your success becomes a shared objective. Engage with Nulux and explore how our unparalleled DCS infrastructure technical support can ensure that your operations never falter, your network never falters, and your success story continues unabated. Contact us today for a consultation that will pave the way toward a technologically fortified future. View Details

Mercury Decontamination

Mercury contamination can be a serious problem for many industries, but Cleanstream has the solution. Our specialized Mercury decontamination process uses green, non-corrosive chemicals to treat even the most complicated materials and objects, removing stubborn dirt and hard-to-reach areas. We take pride in using a release value of only 1mg/kg, ensuring safety and compliance with regulations. Before beginning any cleaning process, we take a sample of the contamination and examine it using XRF analysis in our internal laboratory. We share the results with our clients to ensure transparency and quality in our work. At Cleanstream, we understand the importance of cleaning without damage. Our experts are experienced workers who have developed inventive cleaning methods to ensure that materials are not damaged during the cleaning process. We also carefully disassemble materials for optimal cleaning, ensuring that every part is properly treated. We believe in sustainable solutions, which is why we take care of the removal of mercury-containing waste from decontamination. The cleaned materials can be reused or recycled for further use. Cleanstream is committed to providing fast and cost-effective services without compromising safety or quality. We are constantly improving our processes to reduce waste and provide green solutions. Join us in our mission to promote safety and sustainability in your industry. Contact Cleanstream today to experience our innovative and efficient Mercury decontamination process. With our safe, green, and effective solutions, you can trust us to deliver the best possible results for your business. View Details

ROV Surface Console

BL300 Heavy Inspection Class ROV

Exploring the Depths with Unmatched Precision: Introducing the BL300 Heavy Inspection Class ROV At Poseidon Robotics, we pride ourselves on pushing the boundaries of subsea exploration technology, and our latest creation, the BL300 Heavy Inspection Class ROV, exemplifies this commitment to excellence. Designed to tackle large payloads and challenging dives, the BL300 combines cutting-edge features with a professional Aluminum frame, delivering unparalleled performance in its class. A Collaboration of Innovation: The Birth of BL300 Developed in close collaboration with BLUELINK, LLC, the BL300 ROV emerged as a result of identifying and addressing the market's evolving needs. Launched in March 2019, this exceptional remotely operated vehicle has since redefined the heavy inspection class, becoming the preferred choice for professionals in the subsea industry. The Perfect Blend of Power and Precision The BL300 boasts a unique vectored thruster layout, strategically designed to provide optimum control and stability during underwater operations. Its professional Aluminum frame ensures durability and reliability, making it the ideal choice for challenging dives that demand exceptional performance. Moreover, by utilizing off-the-shelf components, we have achieved an unparalleled price/performance ratio, providing unbeatable value to our customers. Advanced Topside Integrated Console: A Complete Solution in One Package With the BL300 Heavy Inspection Class ROV, we've taken convenience to the next level. The Topside Integrated Console houses a 22-inch sunlight-readable monitor and a hand controller, eliminating the need for additional equipment. The ROV flight computer supports a fully stabilized mode, enabling six-axis stability for precise maneuvering and control. Unrivaled Payload Capacity and Thruster Configuration The BL300 redefines what's possible in a heavy inspection class ROV by offering exceptional payload space and capacity. With a depth rating of 400 meters, this powerhouse can handle the most demanding subsea missions. The smaller diameter vertical thrusters are stacked to optimize the payload area, making it the perfect solution for accommodating large payloads while maintaining stability. The BL300 at a Glance: Specifications • Depth rating: 400m • Dimensions: 725x465x425mm (LWH) • Weight in air: 32.1kg • Payload capacity (fresh water): 9.8kg • Payload area: 610mm x 457mm • Thruster: 8 lateral (45deg), 6 vertical • Ballard Pull: 20kg lateral, 24kg vertical • Top speed: 3 knots • Video: 1080 HD IP camera with tilt • Aux video: NTSC/PAL input • Lights: 10x 1,500 Lumen each • Connectivity: 1x Ethernet, 4x Serial • Aux power: 5/12/24VDC regulated The Topside Integrated Console: Specifications • Output voltage: 400VDC, 3kW • Input voltage: 240VAC, 20A maximum • Monitor: 22in HD sunlight readable • Case: wheeled, 610x420x260mm, 24kg • Fully isolated output with LIM • Intel PC with Windows 10 installed • Aux HDMI monitor output The Unbreakable Tether To ensure a secure connection and reliable communication between the BL300 ROV and the topside console, our tether is designed with utmost strength and durability. With a breaking strength of 500kg and a 15mm diameter, this robust tether can handle the most demanding subsea conditions, ensuring seamless transmission of data and video. Experience the Robotics Difference As pioneers in the subsea robotics and ROV industry, we have continuously driven innovation and excellence, and the BL300 Heavy Inspection Class ROV is the epitome of our dedication. Explore new depths with confidence, efficiency, and precision. Unleash the Power of BL300 Today Discover a new era of subsea exploration with the BL300 Heavy Inspection Class ROV. Contact us now to explore the possibilities and equip yourself with the most advanced ROV technology available. Together, we will embark on a journey of discovery, uncovering the secrets that lie beneath the waves. View Details

Hydraulic Set Production Packer

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) is a state-of-the-art downhole tool engineered to deliver the robustness of a permanent packer with the added convenience of retrievability. Designed for high-pressure (up to 15,000 psi) and high-temperature (up to 450°F) environments, this hydraulic-set packer is ideal for challenging well conditions.

Key Features:

• Anti-Preset Mechanism: Ensures the packer remains unset until a predetermined tubing pressure is applied, preventing premature setting during deployment.

• Anti-Reset Functionality: Upon release, a snap ring engages the mandrel, locking the lower cone in place to keep the barrel slip retracted, facilitating smooth retrieval.

• Propped Element Design: Offers superior sealing capabilities, maintaining integrity under extreme conditions.

• Barrel Slip Configuration: Located below the elements, it uniformly distributes loads to the casing, enhancing stability and performance.

• Metal-to-Metal Backup Shoes: Provide 360° casing wall contact, ensuring reliable element containment and preventing extrusion.

• No Mandrel Movement Operation: Simplifies the setting process and reduces potential operational issues.

Benefits:

• Eliminates Milling Requirements: The packer can be retrieved without the need for milling, streamlining the retrieval process.

• Enhanced Sealing and Retrieval Reliability: Combines robust sealing mechanisms with dependable retrieval features to ensure operational success.

• Reduced Rig Time: Efficient design minimizes time spent during both completion and decompletion phases, leading to cost savings.

Applications:

• Suitable for hot, corrosive, deep, and deviated wells, whether for production or testing purposes.

• Ideal for scenarios where minimal casing deformation or damage is critical.

• Supports single-trip completions and multi-packer installations.

• Effective for liner top isolation and monobore completions.

Available Sizes:

• Compatible with casing sizes ranging from 5-1/2 inches to 7-5/8 inches.

For detailed specifications, please refer to the product’s specification sheet.

The Ballycatter Hydraulic Set Production Packer 15K (Cut to Release) stands as a reliable solution for operators seeking a balance between the durability of permanent packers and the flexibility of retrievable systems in demanding well environments.

View Details