The Mini Needle Valve Series – Male x Female is designed for accurate and reliable flow control in small or compact piping systems. Its male-to-female connections allow easy integration into existing instrumentation or process lines. The valve ensures bubble-tight shut-off, preventing leaks in sensitive applications.

The rolled stem threads provide smooth operation, strength, and long service life, while the mirror-finished stem reduces friction, extends packing life, and ensures consistent performance. Packing located below the stem threads prevents lubricant washout, protects against corrosion, and keeps solids from entering the thread area, which could cause damage.

With low operating torque, these valves are easy to operate even in tight spaces. Optional panel-mount versions allow installation in control panels or instrument assemblies, making them ideal for oil and gas, chemical, and other industrial applications where precise flow control is essential.

The H Type 3 Valve Manifold – Flange to Flange is designed for connecting impulse lines and differential pressure transmitters in oil and gas and industrial process applications. It consists of two block valves, one equalizer valve, and two ¼” Female NPT vent/test connections, providing accurate isolation, calibration, and maintenance of instrumentation.

The manifold is rated for a standard working pressure of 6000 PSI, with maximum ratings up to 10000 PSI available on request. Temperature ratings range from -50°C to 230°C, with 500°C possible using graphite seals. The body features a metal-to-metal seal for high pressure and temperature applications, eliminating the need for O-ring seals, and materials can be supplied according to NACE MR 01 75 standards.

Each valve is 100% factory tested per international pressure standards, including pneumatic testing with nitrogen at 1000 PSI for seat and packing leakage, with a maximum allowable leak rate of 0.1 sec/min. Stems have back seats, rolled threads, and self-centering non-rotating tips for consistent, leak-free operation. The H Type design allows reliable, safe, and precise operation in high-pressure, high-temperature process environments.

The Double Block and Bleed Valve with Flange x Thread connections and Ball x Ball isolation with Needle Drain is a compact assembly designed to provide dual isolation in oil and gas systems. The two ball valves ensure reliable upstream and downstream shutoff, while the needle drain allows controlled venting, sampling, or pressure release between the isolation points. This design reduces the number of flanged joints and potential leak paths, improving safety and reliability in instrument and process applications.

The valve is available in sizes from ½ inch to 2 inch and pressure classes from 150 to 2500, making it suitable for a wide range of process conditions. It can be manufactured in various materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, and can be supplied to meet NACE MR-01-75 requirements. The assembly is built to recognized standards including ASME B16.34, API 6D, and ISO 17292 and is tested to ensure proper operation, minimal leakage, and long service life.

This valve is ideal for instrument isolation, gauge protection, chemical injection, sampling connections, and other applications where safe and reliable dual isolation is required. Its compact and integrated design reduces installation complexity, simplifies system layout, and provides a safer and more efficient solution compared to assembling individual valves.

The 5 Valve Manifold R Type – Pipe to Pipe is designed for high-pressure oil and gas applications where differential pressure transmitters or gauges need to be connected, calibrated, and maintained safely. This manifold provides two block valves, two equalizer valves, and one bleed valve in a single assembly, allowing operators to isolate the transmitter, equalize pressure between impulse lines, and safely vent pressure when required.

The R Type configuration is particularly suitable when multiple valve functions are needed in a compact layout. By combining all five valves in one manifold, it reduces the number of separate components, minimizes potential leak points, and saves installation space compared to using individual valves.

This manifold is ideal for environments where reliability and safety are critical, offering 6000 PSI standard working pressure, metal-to-metal sealing for high-pressure and temperature performance, and compatibility with NACE MR 01 75 materials. Its design ensures smooth operation, low torque handling, and long-term durability, making it the preferred choice for complex measurement and control systems in oil and gas operations.

The HDI 2021 Pressure Transmitter System is an electronic device designed to measure pressure accurately and convert it into a standardized 4–20 mA electrical signal for monitoring and control. It consists of a strain gauge sensor embedded in a stainless-steel housing and a transmitter assembly that processes the sensor signal. This system is widely used in oil and gas operations to provide precise, real-time pressure data essential for safe and efficient wellhead monitoring, pump and compressor control, manifold pressure tracking, and other critical process points.

In typical oilfield applications, the transmitter measures pressure at locations such as wellheads, flowlines, separators, and pumps to ensure that equipment operates within safe pressure limits, preventing failures and optimizing production. The 4–20 mA output enables easy integration with control systems, remote displays, data loggers, and automated safety shutdowns, supporting operational decisions and regulatory compliance.

The 2021 system supports pressure ranges from 5,000 psi to 20,000 psi, with overpressure protection allowing up to 30% above rated pressure for lower ranges, and 10% for higher ranges. It offers multiple housing options including hammer unions and various flanged connections to fit existing infrastructure. The sensor uses a high-quality strain gauge design with a robust stainless-steel case to ensure durability in harsh field conditions. A shielded instrument cable (up to 200 feet recommended) connects the sensor to the transmitter, minimizing electrical noise for reliable data transmission. The system is field repairable and designed with no moving parts or fluids, reducing maintenance needs and enhancing reliability.

The 2021 Pressure Transmitter System delivers accurate, dependable pressure measurement critical for monitoring and controlling high-pressure equipment in oil and gas operations, helping to maintain safety, protect assets, and improve production efficiency.

The Ball Valve Lever Operated – 2-Way (Male × Female) is an isolation valve used to start, stop, or regulate fluid flow in oil and gas piping systems. Its 2-way design provides simple, reliable flow control, making it ideal for applications where full shut-off or bi-directional flow is required, such as upstream production lines, downstream processing, pipeline distribution, and injection systems.

The valve features a floating ball design for seat wear compensation and leak-proof performance under high-pressure conditions. It is manufactured and tested to ASME B16.34, meets ASME B31.3 pressure-temperature ratings, and is type-tested to MSS-SP-99. It supports bi-directional flow with a standard working pressure of 6000 psi (maximum 10000 psi on request) and a temperature range of –40 °F to 450 °F (–40 °C to 232 °C).

It operates via a quarter-turn lever with low torque. The stem is internally loaded with a shoulder to prevent blowout. Replaceable seats and packings extend service life, and the maximum orifice minimizes pressure drop. The valve is factory tested with nitrogen gas at 1000 psig (maximum leak rate 0.1 sec/min). Optional tests include vibration, temperature, and helium. It can also meet NACE MR0175 standards and fire-safe requirements, with heat code traceability for all components.

In conclusion, this 2-way ball valve provides reliable, leak-proof isolation for critical oil and gas operations, combining robust construction, high-pressure capability, and ease of operation to ensure safe and efficient flow control across the system.

The 45° Elbow NPT Thread Tube Fitting is a specialized connector used to change the direction of flow in piping systems by 45 degrees. Manufactured to precise standards, it provides a strong, leak-resistant connection between tubes with NPT threads, ensuring consistent system performance. The fitting is suitable for use in oil, gas, and industrial process systems, where controlling flow direction and minimizing stress on tubing is critical.

Its design allows compact and efficient piping layouts, reducing the need for multiple fittings while maintaining smooth fluid flow. The fitting is machined to ensure tight tolerances, providing reliable sealing even under vibration, thermal expansion, or pressure fluctuations. Case-hardened threads improve durability, while the material selection ensures compatibility with common industrial fluids and gases.

Unique to this fitting is its ability to create a precise 45° angle connection without compromising the integrity of the tubing system, making it ideal for applications where space is limited or exact routing is required. Installation is straightforward: the tube is inserted into the fitting, and the NPT threads create a secure mechanical seal that resists leakage over extended operational periods.

The 1/2" poppet check valve with female × female NPT connections is designed to allow fluid to flow in only one direction while preventing any backflow. This is important in oil and gas systems because backflow can damage pumps, pipelines, and other equipment. The valve is commonly used in medium-sized lines, instrumentation, sampling, and control applications where reliable flow control is required.

The valve operates at a standard pressure of 6000 psi, with optional configurations available for pressures up to 10000 psi. Cracking pressures, the minimum pressure needed to open the valve, can be selected from 1/3 to 25 psi, giving flexibility to match the needs of specific systems. Its poppet mechanism responds quickly to flow changes and provides a tight seal, ensuring consistent performance and preventing leaks.

Made from corrosion-resistant materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, the valve is suitable for harsh oil and gas environments. Female × female NPT connections allow for secure inline installation without extra fittings, reducing the risk of leaks and simplifying integration into existing piping.

Each valve is factory tested for cracking and reseal performance, ensuring it opens and closes reliably. Heat code traceability is provided to verify material quality. Additional testing, such as vibration, temperature, and helium testing, can be requested for applications requiring high reliability.

This valve is compact, durable, and designed for long-term operation with minimal maintenance. It helps maintain system pressure, protects critical equipment, and ensures that oil and gas systems operate safely and efficiently.