Ballycatter.ca - Industrial Equipment

Full moon sheaves are designed to be used in conjunction with Sivam spooling units. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

T5.4 Thermocouple for LM2500

The T5.4 thermocouple is a temperature-sensing probe used in LM2500 gas turbines to measure exhaust gas temperature (EGT). The label T5.4 refers to its specific position in the turbine\'s exhaust thermocouple array—zone T5 (turbine exhaust), sensor 4. These sensors are part of a system that monitors thermal conditions at multiple points in the exhaust stream.

This thermocouple operates in high-temperature environments, withstanding continuous exposure up to approximately 1100°C. It is built to maintain accuracy and reliability under the thermal stress and vibration typical in gas turbine applications.

T5.4 thermocouples are often used with flexible

harness systems. This allows operators to replace individual probes without removing the entire harness, improving maintenance efficiency and reducing downtime.

By providing real-time exhaust temperature data, the T5.4 thermocouple supports engine control, performance optimization, and safety monitoring in industrial gas turbine operations.

View Details

Tubing Hanger Coupling – 6 5/16” to 2 1/2”

The 6 5/16” to 2 1/2” Tubing Hanger Coupling is a specially made part used in oil and gas wells to connect a large casing opening to smaller tubing—typically 6 5/16 inches—to a smaller 2 1/2-inch upset production tubing. This size combination is often selected for well designs that require a broader casing interface for flow management, safety equipment, or well control hardware, while maintaining a slimmer production string for specific flow requirements or structural considerations.

This coupling is manufactured with upset-end compatibility, meaning it is suited for tubing that has thickened ends designed to strengthen threaded connections. This feature improves mechanical reliability and helps the connection withstand downhole pressure, tensile loads, and thermal cycling. The union nut design allows the coupling to be installed by tightening the nut without rotating the upper wellhead assembly, which is particularly useful in space-constrained or high-integrity environments.

To accommodate a range of operational needs, the coupling can be threaded on both ends to suit different tubing or spool designs and is compatible with back pressure valves—providing added safety during pressure control, intervention, or servicing. Built in accordance with API specifications and from high-strength materials, the coupling is designed to operate reliably in demanding conditions, including high-pressure wells and corrosive environments.

View Details

Solar Panel capable of providing power to typical industrial monitoring and control systems

A solar panel, or solar module, is one component of a photovoltaic system. They are constructed out of a series of photovoltaic cells arranged into a panel. They come in a variety of rectangular shapes and are installed in combination to generate electricity. Solar panels are comprised of several individual solar cells which are themselves composed of layers of silicon, phosphorous (which provides the negative charge), and boron (which provides the positive charge). Solar panels absorb the photons and in doing so initiate an electric current. The resulting energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their atomic orbits and released into the electric field generated by the solar cells which then pull these free electrons into a directional current. This entire process is known as the Photovoltaic Effect. View Details

Off-Engine Electrical Cable Harness – E3/E17 for LM-Series Turbines

The E3/E17 off-engine electrical cables are designed for resilience in the toughest of applications. To protect the critical wiring components from exposure to harsh environmental conditions, these cables incorporate rugged materials and advanced protective features.

Used with LM2500 gas turbines, these cables are located outside the engine and serve as essential links between the turbine’s internal control systems and external instrumentation, control panels, and auxiliary equipment.

Built to withstand vibration, moisture, extreme temperatures, and chemical exposure, E3/E17 cable harnesses include stainless steel connectors, rubber or fluoropolymer over-molding, and electromagnetic interference (EMI) shielding to maintain signal integrity and durability.

The E3/E17 classifications indicate different cable configurations and connector types tailored for specific LM turbine system requirements. Both ensure reliable transmission of electrical power and control signals critical to turbine operation, safety, and performance monitoring.

Manufactured with custom materials and protective coatings, these cables comply with hazardous location standards such as ATEX and UL/CSA certifications. Their robust design provides long service life with minimal maintenance, supporting high fleet availability and operational reliability.

In oil and gas applications, where equipment is exposed to extreme environments and strict safety regulations, the E3/E17 off-engine cables offer dependable, durable connectivity. Their rugged construction and certification for hazardous locations make them ideal for maintaining safe, continuous turbine operation in demanding field conditions.

View Details

Tubing Hanger 2 3/8

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required. View Details

Tubing hanger with electrical feedthrough for ESP applications

The tubing hanger holds a feed-through mandrel equipped with the proper seals. Feed-through mandrel seals contain well pressure and prevent gas leaks at the surface. Power cables are connected to the two ends of this device via their three-phase connectors (also called: lower and upper pigtails). The feedthru portion of the system provides a fluid block at the wellhead permitting electrical power to pass safely and reliably through the well’s pressure barrier. The connector works with the wellhead manufacturer to assure proper fit and material compatibility. View Details

Stranded Gas Virtual Pipeline

Maximize the Value of Your Stranded Gas with Lovat Gas Solutions Stranded gas, trapped in wells that are isolated from pipeline infrastructure, represents an untapped opportunity for producers. At Lovat Gas Solutions, we specialize in helping companies unlock the value of their stranded gas assets. If you have idle gas wells and are seeking to realize the potential value of this resource, we are here to assist you in developing a production and revenue plan. Stranded gas wells can present unique challenges, but they also hold significant potential. To extract value from these assets, a well-designed plan is essential. Our team of experts at Lovat Gas Solutions has the knowledge and experience to help you navigate this process and develop a comprehensive production and revenue plan for your stranded gas. Why choose Lovat Gas Solutions for your stranded gas needs? 1. Specialized Expertise: We understand the complexities and nuances of stranded gas projects. With our specialized expertise, we can assess the unique characteristics of your stranded wells and design a customized plan to extract and monetize the gas effectively. 2. Value Optimization: Our goal is to help you maximize the value of your stranded gas assets. By developing a production and revenue plan tailored to your specific situation, we aim to unlock the full potential of your resources and generate a significant return on investment. 3. Comprehensive Support: From the initial evaluation to the execution of the plan, Lovat Gas Solutions provides end-to-end support. Our team will collaborate closely with you, offering guidance and assistance at every stage of the process to ensure a seamless and successful outcome. 4. Sustainable Approach: We prioritize environmental sustainability in all our operations. Our plans for stranded gas production are designed to comply with regulatory standards and minimize any potential impact on the environment. We are committed to helping you extract value from your stranded gas assets while maintaining responsible and sustainable practices. Take the first step towards unlocking the value of your stranded gas assets. Contact Lovat Gas Solutions today, and let our team of experts develop a production and revenue plan that suits your specific needs. With our specialized expertise, comprehensive support, and commitment to sustainability, we are the partner you can rely on to maximize the potential of your stranded gas resources. Trust Lovat Gas Solutions to transform your idle gas assets into valuable sources of revenue. View Details

Valve Manifolds 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 2 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT is designed to provide a reliable and compact solution for connecting impulse lines to pressure transmitters and gauges. This manifold allows operators to safely isolate instruments from the process for maintenance, calibration, or testing, without the need to shut down the system. The T-type configuration features two valves that control flow to and from the instrument, enabling efficient block, bleed, and vent operations.

The pipe-to-pipe design ensures a direct connection to the piping system, which reduces potential leak points and simplifies installation. It is suitable for high-pressure applications, with a standard working pressure of 6000 PSI and options available for higher pressures. The manifold is built with a metal-to-metal body and bonnet seal for enhanced durability and temperature resistance, with materials that can comply with NACE MR 01 75 standards for corrosion resistance.

Additional features include a removable T-handle for low-torque operation, self-centering non-rotating stems for consistent shutoff, and a dust cap to prevent contamination. Packing is positioned below the stem threads to isolate the threads from the process media, and the stem’s rolled threads provide smooth operation and long life. The manifold is 100% factory tested for leakage and performance, ensuring reliable operation in critical oil and gas applications.

View Details

SCSSSV – 2 3/8” Surface-Controlled Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 2 3/8" Surface-Controlled Subsurface Safety Valve (SCSSSV) is designed to shut in a well in the event of uncontrolled flow caused by equipment failure or damage. Installed in the upper wellbore, it provides emergency closure of the producing conduits to isolate the wellbore if there is a failure or damage to surface production control systems.

This valve uses a self-equalizing, surface-controlled, flapper-type mechanism that closes reliably when hydraulic control pressure is lost. The flapper is made from solid bar stock and has sealing surfaces located outside the flow path when open, which helps reduce erosion and extends the valve’s service life. It is rated for working pressures up to 10,000 psi.

The valve fits 2 3/8" (60.33 mm) tubing and is installed in landing nipples with seal bore options of 1.710" or 1.875". Valve internal diameter options are 0.62" or 0.75", allowing selection based on flow requirements. The wireline retrievable design permits servicing or replacement of major valve components without pulling the entire tubing string, reducing intervention time and operational disruption.

This valve is typically used in wells with smaller tubing sizes that require dependable emergency shut-in capability. Its design balances reliability, durability, and ease of maintenance to provide effective well control in a variety of well conditions.

View Details

2-1/2 inch Annular Vent and Sleeve

An annular vent sleeve valve communicates between the casing annulus and producing formation. The valve is a hydraulically operated sliding sleeve device like a surface controlled subsurface safety valve with a hydraulic piston and a power spring to maintain the valve in a normally closed position. The valve is used with a bull plug on top or as an annular safety valve by providing annular bypass while control pressure is applied. With an electrical feedthrough device, this valve functions through a single packer mandrel as an electric power cable passage and annular bypass. On a dual hydraulic packer, the valve operates by a common hydraulic control line that sets the packer and operates the tubing-retrievable safety valve. Hydraulic pressure from the control line shifts the valve open to create a flow path across the packer in the annulus. Spring force closes the valve upon loss of control-line pressure to the piston. If the valve becomes inoperable or closed, an emergency shear feature allows fluid to be pumped into the producing formation from the annulus. Applications » Gas lift and electric submersible pump situations Features » Accurate fluid level shot during pumping because of large ported area through the vent sleeve » Maximum gas vent flow area allows increased gas flow rates and lower circulating pressures » Valve will shut off flow from either direction — production or injection *description excerpted from manufacturers catalogue. View Details

Custom Gas Solutions

Custom Designed Gas Solutions: Your Partner in Customized Excellence with Lovat Gas Solutions At Lovat Gas Solutions, our approach is simple yet effective: we develop custom gas solutions that are specifically designed to meet the unique requirements of your application. As a service-oriented company, we are dedicated to delivering solutions that work seamlessly for your business. It is this commitment to excellence that sets us apart and earns us the loyalty of our valued customers. Why choose Lovat Gas Solutions for your custom gas needs? 1. Tailor-Made Solutions: We understand that your business has distinct requirements and challenges. That's why we take a personalized approach to develop solutions that are specifically tailored to your application. Whether you need a gas supply solution, operational support, or a comprehensive project plan, we design and deliver the solution that perfectly fits your needs. 2. Customer-Centric Focus: Your satisfaction is our top priority. We value your partnership and strive to build long-lasting relationships based on trust and exceptional service. Our team of experts takes the time to listen to your needs, understand your goals, and work collaboratively to deliver the optimal solution for your business. 3. Service-Oriented Approach: Lovat Gas Solutions is committed to providing the highest level of service to our customers. From the initial consultation to ongoing support, we prioritize responsiveness, reliability, and open communication. Our dedicated team is always ready to address your questions, concerns, and evolving needs. 4. Proven Track Record: Our customers love working with us because we consistently deliver results. With a wealth of industry experience, our team has a proven track record of success in developing and implementing effective gas solutions across various sectors. We are confident that we can exceed your expectations and provide you with a solution that works seamlessly for your application. Choose Lovat Gas Solutions as your partner for custom gas solutions. Experience the difference of working with a company that is dedicated to developing tailored solutions that deliver optimal results for your business. Contact us today to discuss your specific needs, and let our experienced team design a custom gas solution that works for you. Together, we will achieve excellence and drive your success with Lovat Gas Solutions. View Details

2-3/8 inch Halliburton WellStar TR-SCSSSV

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details

Gas Supply

Reliable Gas Supply Solutions: Your Peace of Mind with Lovat Gas Solutions When you reach out to Lovat Gas Solutions, it's because you have a pressing need for gas. We understand the urgency and importance of resolving this issue promptly and efficiently. That's why we take our job seriously – to provide you with a gas supply solution that not only solves your immediate problem but also ensures a seamless experience without creating further headaches for your business. At Lovat Gas Solutions, we pride ourselves on our ability to develop and execute reliable gas supply solutions tailored to your specific application. We prioritize understanding your unique needs and challenges, working closely with you to devise a solution that effectively and consistently meets your requirements. Why choose Lovat Gas Solutions for your gas supply needs? 1. Customer-Centric Approach: Your satisfaction is our top priority. We listen attentively to your concerns, taking the time to understand the intricacies of your gas supply requirements. Our dedicated team is committed to developing and executing a solution that reliably solves your problem without causing additional complications. 2. Reliability: We recognize the critical importance of reliable gas supply for your business operations. With our extensive industry experience and expertise, we ensure that the gas supply solution we provide is dependable, allowing you to focus on your core business activities with peace of mind. 3. Tailored Solutions: We understand that each application is unique, requiring a customized approach. Our team of experts takes a proactive and innovative approach to develop a solution that precisely addresses your gas supply needs. Our goal is to exceed your expectations and provide you with a solution that seamlessly integrates into your existing operations. 4. Seamless Execution: At Lovat Gas Solutions, we believe in delivering on our promises. With meticulous planning, efficient execution, and attention to detail, we ensure a smooth transition from gas supply issues to reliable operations. Our commitment to your success is reflected in our dedication to providing a hassle-free experience. When you choose Lovat Gas Solutions, you choose a partner that takes your gas supply needs seriously. We are dedicated to solving your gas supply challenges without creating further headaches for your business. Contact us today, and let our experienced team develop and execute a reliable gas supply solution that meets your unique requirements. Experience peace of mind with Lovat Gas Solutions as your trusted gas supply partner. View Details

Check Valves

Maximize Well Integrity and Safety with HOCA Oil Tools' BHP Tool Accessories In the complex and demanding realm of oil and gas extraction, ensuring well integrity and optimizing production are paramount. HOCA Oil Tools rises to this challenge with our premium BHP (Bottom Hole Pressure) Tool Accessories, specifically designed to enhance the performance and reliability of downhole pressure monitoring systems. These accessories, vital for the precise measurement and control of well conditions, are engineered to complement our BHP tools, facilitating accurate data acquisition and ensuring well safety. HOCA’s BHP Tool Accessories: Elevating Downhole Precision and Reliability Our BHP Tool Accessories range includes various components crucial for the efficient operation of bottom-hole pressure tools. From specialized adaptors that ensure secure fittings to protective carriers designed to safeguard sensitive instruments during deployment and retrieval, each accessory is crafted to meet the highest standards of quality and performance. By addressing the unique challenges of downhole environments, HOCA Oil Tools provides the oil and gas industry with solutions that not only meet but exceed operational demands. Experience the Difference with HOCA Oil Tools Opting for HOCA Oil Tools' BHP Tool Accessories means choosing a partner dedicated to enhancing the efficiency and safety of your downhole operations. Our commitment to innovation and quality ensures that our products not only meet industry standards but also provide the reliability and performance essential for today's challenging oilfield environments. By integrating our BHP Tool Accessories into your operations, you are not only optimizing your downhole monitoring capabilities but also investing in the safety and longevity of your equipment. With HOCA Oil Tools, you gain access to a comprehensive suite of solutions designed to elevate your operational success. Choose HOCA Oil Tools for your BHP Tool Accessories and join the ranks of industry professionals who trust our products to enhance their downhole operations. Partner with us, and unlock the full potential of your oil and gas extraction activities with tools and accessories crafted for excellence. With HOCA Oil Tools, empower your downhole operations with precision-engineered solutions that deliver unmatched performance and reliability. View Details

Welding Machine TIG AC/DC 501 Pulse

4 1/2" HP-6 Hydraulic Set High Angle Production Packer

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations. It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure. Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Voice, data, and video Services

Revolutionizing the Oil and Gas Industry: Nulux’s Superior Voice, Data, and Video Services In the fast-paced, high-stakes realm of the oil and gas industry, communication is not just vital; it's the pivotal axis around which safe and efficient operations revolve. The seamless interchange of data, unerring voice communication, and accurate video services are instrumental in ensuring that engineering professionals manage operations, diagnose issues, and implement strategies effectively. Welcome to Nulux Network Solutions, where we fortify your operational proficiency with unparalleled voice, data, and video services through our top-tier copper cabling network installations. The Nulux Distinction: Bridging Robust Communication with Operational Excellence Nulux, a name synonymous with excellence in telecommunications and networking, brings forth two decades of unmatched experience, especially in the realm of distributed control system (DCS) network upgrades for industrial projects across North America. Our commitment to high-quality networks is not just an offering; it’s a promise delivered consistently across projects, ensuring your communication channels remain unerring, reliable, and perpetually facilitating optimal operations. Engaging Every Facet of Communication with Comprehensive Solutions In the industrial expanses where engineering professionals of the oil and gas sector helm complex operations, Nulux's services in voice, data, and video become the unerring channels that ensure: Voice Services: Enjoy crystal-clear, uninterrupted voice communications that enable precise correspondence across various facets of your operations, ensuring every directive and update is communicated flawlessly. Data Services: Facilitate the impeccable transfer of crucial data with our high-bandwidth, reliable copper networks, ensuring real-time data transmission, storage, and retrieval without a hitch, keeping your operations, analysis, and decision-making well-informed. Video Services: Implement seamless video communication and surveillance across your operations, enabling real-time monitoring, engagement, and management, thereby ensuring safety, operational control, and effective remote management. Why Copper Networks are Integral to Your Communication Channels Nulux not only delivers impeccable voice, data, and video services but does so by leveraging the myriad benefits copper networks offer, such as: High-Bandwidth Transmission: Ensure that your data, voice, and video communications are facilitated with speeds up to 10 Gbps, ensuring real-time communication and data transfer. Long-Term Reliability and Durability: Experience uninterrupted services with a network that withstands the tests of time and operational demands, ensuring your communication channels remain perpetually robust. Ease of Installation and Cost-Effectiveness: With a network that is not only economically viable but also easy to implement, your operations gain the benefit of a communication network that is both, financially and operationally, advantageous. Connect with Nulux: Your Ally in Unerring Communication At Nulux, we understand networks, but more crucially, we comprehend the imperatives of seamless communication, especially in the demanding operational landscape of the oil and gas industry. With a team that encapsulates experience, expertise, and dedication, your network is not merely an infrastructure; it’s a relentless force propelling your operations towards unbridled success and communication clarity. Ensure your voice is heard, your data is transferred, and your visuals are seen with unmatched clarity. Engage with Nulux Network Solutions today, and let’s craft a communication network that becomes the unwavering backbone of your operational success and excellence. View Details

HDI 1000B Pressure Gauge System

The HDI 1000B Pressure Gauge System is an intrinsically safe, battery-powered, solid-state electronic pressure gauge designed for accurate and reliable pressure measurement in demanding industrial environments. It measures pressures ranging from 30 psi up to 20,000 psi with an accuracy of ±0.50% of full scale. The system features a durable design with no fluids or moving parts, reducing maintenance requirements and improving long-term reliability.

The gauge includes a clear liquid crystal display (LCD) that combines a five-digit numeric readout for precise pressure values with a 101-segment analog bar graph for quick trend visualization. The display is easily readable in various lighting conditions and includes a low battery indicator to ensure continuous operation.

The 1000B system is modular, comprising a gauge display, inline cable, and sensor assembly. This design allows the display to be positioned close to or remotely from the pressure measurement point, providing flexibility in installation. The system supports multiple connection types including 2” Male NPT, 2” 1502, 2” 2002/2202, or flanged connections to fit different piping standards.

Power is supplied by a replaceable internal 3.6 VDC battery pack, which typically lasts up to 18 months during continuous operation. The gauge system is designed to retain calibration and settings during battery changes or power interruptions, enhancing reliability in field use.

For integration with control systems, the 1000B offers optional 4-20 mA or 0-1 V outputs, enabling remote monitoring, data logging, or connection to PLCs and chart recorders. The system is built to withstand high vibration environments, making it suitable for offshore, drilling, and other heavy industrial applications.

Overall, the 1000B Pressure Gauge System provides a precise, low-maintenance, and versatile solution for pressure measurement needs where safety, accuracy, and durability are critical.

View Details

Hydraulic Control Line for SCSSSV

Control lines are assembled on reels filled with fluid and pressure tested. Reel spools are designed so pressure can be applied at any time during running to check control-line integrity. Hydraulic control lines are made from two different manufacturing processes that conform to ASTM specifications: (1) seamless and (2) welded and sunk. Seamless Tubing is fabricated from a solid rod. The process involves forcing a mandrel or punch through the solid rod to form a tube. The continuous lengths available from this process are limited. Welded and Sunk Tubing is fabricated from flat stock. The process involves rolling the stock into a cylinder and welding the seam. Once in tube form, it is drawn through a die to achieve the proper OD. This process is considerably less costly than the seamless method and yields lines available in continuous lengths with no butt-welded connections. Optional single and dual lines with protective encapsulation are available. The encapsulated material is suitable for use in most annular fluids. Encapsulation protects lines from damage during installation and simplifies the running process. The dual-encapsulated line can be used with “balanced” SCSSVs or injection wells where multiple lines are required. As an option, a protective cable between two control lines is available. Single-encapsulated lines have no cable; however, a protective cable on either side of the control line can be ordered. Installation Control lines are attached to subsurface controls with appropriate tube fitting and pressure tested before running into the wellbore. Line spools are hung in the derrick, and control line is paid out as tubing is run. Applications » For SCSSVs Features » Different lengths of control line in continuous coil » Stainless and alloy 825 materials offered » Control lines offered in various encapsulated options » All control lines conform to ASTM specifications » Lines available in other sizes on request *information sourced from manufacturer View Details

Cable Counter

I'm excited to share with you one of our innovative products that can greatly benefit your business. Our cable counters are designed to accurately measure material as it's threaded through the internal wheels, making it an essential tool for the oil industry. What sets our cable counters apart is their ability to add and subtract measurements, giving you precise readings of the amount of material that has been used or remaining. This feature not only saves you time but also ensures accuracy in your operations, which is crucial in the oil industry. Our cable counters are versatile and can be mounted on a pedestal or floor stand, making them easy to use and accessible for your team. This ensures that your operations run smoothly and efficiently. At Sivam, we take pride in our commitment to quality and durability. Our cable counters are built to withstand harsh environments and are made to last, giving you peace of mind and saving you money in the long run. Investing in our cable counters will give you a competitive edge in the oil industry, making your business more efficient and profitable. Contact us today to learn more about our products and how they can benefit your operations. View Details

NIU - Pipe Inspection ROV

Introducing the NIU ROV: Your Ultimate Pipe Inspection Solution The NIU ROV - The Pipe Inspection Remote Operated Vehicle. Engineered to excel in pipe and tunnel inspections, the NIU ROV sets new standards for versatility, precision, and efficiency in the subsea industry. Unleash the Power of NIU ROV The NIU ROV is purpose-built to navigate the intricate and challenging environments of pipes and tunnels. With its compact design, this remarkable ROV can effortlessly maneuver through a 12-inch diameter pipe, providing unparalleled access to previously hard-to-reach areas. From industrial pipelines to underwater tunnels, the NIU ROV is your go-to solution for comprehensive inspections. Unparalleled Performance The NIU ROV is equipped with state-of-the-art technology and robust features that ensure exceptional performance in every operation. Its advanced thrusters enable precise movement and control, allowing operators to conduct inspections with utmost accuracy. The powerful onboard lighting system ensures crystal-clear visibility even in the darkest and murkiest conditions. Efficiency Redefined We understand the value of time and efficiency in subsea operations. The NIU ROV is designed to streamline your inspection processes, significantly reducing downtime and operational costs. Its ease of deployment and user-friendly interface enable quick setup and seamless integration into your inspection workflows. Tailored for Pipe and Tunnel Inspections Unlike generic ROVs, the NIU ROV is engineered specifically for the unique challenges of pipe and tunnel inspections. Its rugged construction and protective measures safeguard it from potential hazards encountered in these confined environments. With the NIU ROV, you can confidently conduct inspections with minimal risk and maximum efficiency. Cutting-Edge Technology The NIU ROV incorporates cutting-edge technology, including high-resolution cameras, to provide a comprehensive view of the inspection area. Its real-time data transmission capabilities allow operators to monitor and analyze data on the surface, making informed decisions on the spot. Unlock New Possibilities with NIU ROV From oil and gas pipelines to municipal infrastructure, the NIU ROV opens up a world of possibilities for inspecting critical subsea assets. Its adaptability and versatility make it an indispensable tool for various industries, including energy, construction, engineering, and more. Choose NIU ROV When you choose the NIU ROV, you not only invest in a top-of-the-line inspection solution but also gain access to our unmatched expertise and support. Our team of subsea specialists is ready to assist you every step of the way, ensuring that you harness the full potential of our advanced ROV technology. Embark on a New Era of Pipe Inspections Step into the future of subsea inspections with the NIU ROV - The Pipe Inspection Remote Operated Vehicle. Experience unparalleled performance, efficiency, and precision in your pipe and tunnel inspections. Contact us today to explore how the NIU ROV can revolutionize your subsea operations. Your success is our mission! View Details

Electric Submersible Pump ESP Packer – 7" – 3,500 PSI

The 7" ESP Packer is a single-mandrel, dual-bore, hydraulic-set production packer set in place using hydraulic pressure applied through the tubing. The dual-bore configuration includes a pass-through section that allows the electric cable to reach the ESP pump below the packer while maintaining isolation between the tubing and the annulus, enabling reliable deployment and operation of the ESP system for artificial lift in oil and gas wells.

The packer has bi-directional, case-carburized barrel slips that anchor it securely against well pressures from both above and below, preventing movement during operation. It can be retrieved with a straight upward pull on the tubing string and is available in both straight-pull and cut-to-release configurations to suit different well conditions.

The packer has a nominal size of 7" and fits 7" casing weighing 26–32 PPF or 7-5/8" casing weighing 55.3 PPF. The outer diameter is 5.970", and the main bore inner diameter is 2.992". The assembly allows up to five feed-through lines for electric cables or injection lines, and the total length is 125".

The body is made from L80 material with HNBR elastomer seals, rated for pressures up to 3,500 PSI and temperatures from 70°F to 300°F. Connections include a 3-1/2", 9.2 PPF VAM TOP box at the top and a 3-1/2", 9.2 PPF VAM TOP pin at the bottom. The release weight is 68,800 lbs. The packer meets API Validation Grade V3 and Quality Level QL1 standards, providing reliable performance under standard service conditions.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

High Torque Super Spooler Unit

The Super Spooler SUHT-25-2415 is designed for the heaviest of spooling loads in the most adverse conditions. Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Safety Valve for Water Injectors 5.71 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Tailor Made Gas Solutions

Tailor-Made Gas Solutions: Your Trusted Partner for Mobile Gas At Lovat Gas Solutions, we understand that every gas-related application is unique. That's why we leverage our extensive experience and expertise to develop tailor-made solutions that perfectly match your specific needs. Whether it's volume, application, duration, or location, we consider all the relevant factors to deliver the best solution for your job. What sets Lovat Gas Solutions apart? 1. Experience and Expertise: With years of industry experience, our team has a deep understanding of gas-related challenges and requirements. We have successfully designed and executed numerous projects across various sectors, earning the trust and loyalty of our customers. 2. Customized Approach: We believe in the power of customization. By considering your specific requirements, we develop fit-for-purpose solutions that precisely address your needs. Our solutions are not one-size-fits-all; they are carefully tailored to ensure optimal performance and efficiency for your application. 3. Quality Solutions: Our commitment to quality is unwavering. We take pride in delivering solutions that meet the highest standards of performance, safety, and reliability. When you choose Lovat Gas Solutions, you can trust that our fit-for-purpose solutions will exceed your expectations and deliver exceptional results. 4. Customer Satisfaction: Your satisfaction is our ultimate goal. We prioritize open communication and collaboration to ensure that we fully understand your objectives and challenges. Our dedicated team goes the extra mile to provide personalized service and support, making us the first call for our customers whenever they need mobile gas solutions. Contact Lovat Gas Solutions today and discover how we can help you with your mobile gas needs. We are confident that our tailor-made solutions will exceed your expectations, and one job is all it takes for you to experience the excellence of Lovat Gas Solutions. Let us be your trusted partner in delivering exceptional gas solutions that drive the success of your operations. Together, we will find the perfect fit for your gas requirements with Lovat Gas Solutions. View Details

Solar Charge Controller

All-in-one solar power solution The EasySolar combines a MPPT solar charge controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring. The solar charge controller: Blue Solar MPPT 100/50 Up to three strings of PV panels can be connected to three sets of MC4 (PV-ST01) PV connectors. The inverter/charger: MultiPlus Compact 12/1600/70 or 24/1600/40 The MPPT charge controller and the MultiPlus Compact inverter/charger share the DC battery cables (included). The batteries can be charged with solar power (SmartSolar MPPT) and/or with AC power (inverter/charger) from the utility grid or a genset. AC distribution The AC distribution consists of a RCD (30 mA/16 A) and four AC outputs protected by two 10A and two 16A circuit breakers. One 16A output is controlled by the AC input: it will switch on only when AC is available. PowerAssist Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed. Unique solar application software Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications. *information from manufacturer catalogue View Details

Custom ROV Hydraulics including Metering and Auxilary Pumps

Unleash the Power of Custom Hydraulics: Metering and Auxiliary Pump Solutions In the depths of the ocean, where precision and reliability are paramount, having the right hydraulic system can make all the difference in the success of your subsea operations. We take immense pride in introducing our cutting-edge Custom Hydraulics, including the Metering Pump and Auxiliary Pump solutions. Designed to excel in the harshest subsea environments, our hydraulic systems offer unrivaled performance, efficiency, and adaptability. Custom Engineered for Your Unique Needs We understand that every subsea mission is unique, and off-the-shelf solutions may not always suffice. That's why we offer custom-engineered hydraulics tailored to your specific requirements. Our team of experts works closely with you to design and manufacture hydraulic systems that perfectly align with the demands of your subsea projects. Metering Pump: Precision at Its Best When it comes to accurate fluid control and metering, our Metering Pump stands in a class of its own. Whether you need precise dosing in underwater chemical injections, flow rate control in subsea sampling, or any other application that demands precision, our Metering Pump delivers flawless results. With unparalleled accuracy and reliability, you can trust our Metering Pump to handle the most critical tasks with ease. Auxiliary Pump: Boosting Your Subsea Power The Auxiliary Pump is your reliable companion when you require additional hydraulic power for your subsea equipment. Whether it's powering hydraulic manipulators, tooling skids, or other heavy-duty operations, our Auxiliary Pump is up to the task. Its robust construction and high-performance capabilities ensure seamless integration with your existing hydraulic system, expanding its capabilities to new heights. Built to Withstand the Abyss Operating in the challenging subsea environment demands hydraulic systems that can endure the pressure—both literally and figuratively. Our Custom Hydraulics are engineered and tested to withstand the extreme conditions of the deep ocean. With superior corrosion resistance, rugged construction, and advanced sealing technology, our hydraulic solutions thrive even in the most demanding underwater scenarios. Safety and Performance, Hand in Hand Safety is our guiding principle. Our Custom Hydraulics are equipped with cutting-edge safety features, ensuring smooth and secure operation during every subsea mission. With precise flow control and reliable power delivery, you can focus on your objectives without compromising on safety. Unlock Your Subsea Potential The Custom Hydraulics, including the Metering Pump and Auxiliary Pump, have been engineered to optimize your subsea operations, increase efficiency, and deliver unmatched performance. Experience the Future of Subsea Hydraulics Elevate your subsea missions to new heights with Custom Hydraulics. Whether you are in research, exploration, or offshore engineering, our hydraulic solutions will be the driving force behind your success. Join the Subsea Revolution Join hands and become a part of the subsea revolution. Contact us today to explore the possibilities of our Custom Hydraulics and embark on a journey of groundbreaking discoveries beneath the waves. View Details

Hydraulic Set Large Bore Retrievable 7” Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for Enhanced Performance

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer, designed to optimize production, injection, and zonal isolation applications. Its expanded internal diameter provides increased flow capacity, reducing pressure drop and improving overall well efficiency. The packer is set using tubing pressure, eliminating the need for tubing manipulation and making it particularly effective in low hydrostatic head wells where conventional setting methods may be challenging. Once engaged, the multiple packing element system ensures a mechanically locked, high-integrity seal, sustaining pack-off force throughout its operational life.

To maintain wellbore stability, the hydraulic hold-down pistons engage after setting, preventing movement due to differential pressure. The body lock ring securely traps the setting force, ensuring that bottom-hole pressure fluctuations or tubing contraction do not compromise the seal. The large bore configuration makes the HPL-1 packer especially suited for high-volume production, deviated wells, and applications requiring unrestricted flow paths for enhanced reservoir performance.

For retrieval, operators can apply a straight upward pull or utilize the optional right-hand rotational release, depending on well conditions. The shear release mechanism enables controlled removal, minimizing downtime and reducing the risk of stuck tools. With its large-bore capability, secure hydraulic setting, and reliable retrievability, the HPL-1 packer is a high-performance solution for maximizing production efficiency, minimizing flow restrictions, and optimizing well completions.

View Details

Ambient 4-1/2 inch SSSV

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 28-32 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Magic Weld 150A Welding Machine and Generator

Introducing the MAGIC WELD 150: Unleash the Power of Portability and Performance! At Canaweld, we understand the challenges welders face on-site and in the field. That's why we're proud to present the MAGIC WELD 150 - the perfect fusion of welding capabilities and generator portability, designed to revolutionize your welding experience. Powerful Performance in a Lightweight Package The MAGIC WELD 150 is a true marvel in its class, offering a remarkable 150-Amp DC Stick welder with an outstanding Honda GX 200 four-stroke engine. This dynamic combination ensures a powerful and steady arc, empowering you to tackle any welding task with ease and precision. Designed for Everyday Use Built for welders who demand the best, the MAGIC WELD 150 is engineered for everyday use as a welder. Its sturdy construction and high-frequency voltage control guarantee smooth welding with all types of electrodes, including cellulosic electrodes, making it a versatile tool for various welding applications. Portability Meets Efficiency Weighing in at just 75 lbs. (34 Kg), this lightweight powerhouse is your go-to companion on-site and around the farm. The 150A in 60% duty cycle ensures consistent performance, while the auto idle feature increases fuel efficiency and extends the engine's lifespan, saving you valuable time and resources. Power Optimizer Function - Your Safety, Our Priority With safety at the forefront, the MAGIC WELD 150 is equipped with a "Power Optimizer" function, a special feature patented by MOSA. This innovative technology prevents engine overload when working near its power limit, offering you peace of mind while you work. Unmatched Certifications and Regulations Rest assured, the MAGIC WELD 150 is CE certified, meeting the highest standards of quality and safety. Its engine complies with U.S. EPA and California EXH/EVP SORE Regulations, making it an eco-friendly and responsible choice. Elevate Your Welding Experience with MAGIC WELD 150 Empower yourself with the MAGIC WELD 150 and experience the unmatched fusion of welding capabilities and generator portability. Take control of your welding tasks like never before and unleash the magic of precise and efficient welding on the go. Canaweld - Your Partner in Portability and Performance At Canaweld, we take pride in providing welding machines and accessories designed to meet the unique needs of welders in the oil and gas industry. The MAGIC WELD 150 embodies our commitment to excellence and innovation, and we are excited to offer you this game-changing welding solution. Unlock the magic of welding prowess and unparalleled portability with the MAGIC WELD 150. Your welding success awaits! Canaweld - Empowering Your Welding Journey! View Details

Valve and Prong Type Equalizing Sub-Assembly

Maximize Downhole Functionality with HOCA Oil Tools' Valve and Prong Type Equalizing Sub Assemblies In the complex world of downhole operations, precision and reliability are paramount for ensuring the safety and efficiency of well interventions. At HOCA Oil Tools, we understand the critical nature of these operations and respond with our top-tier Valve and Prong Type Equalizing Sub Assemblies. These specialized tools are designed to address and overcome the unique challenges presented by downhole environments, ensuring that your operations proceed smoothly and effectively. HOCA’s Valve and Prong Type Equalizing Sub Assemblies: Tailored for Excellence Our Valve and Prong Type Equalizing Sub Assemblies are engineered to facilitate the critical process of pressure equalization in downhole operations, particularly during the installation or retrieval of downhole equipment. These assemblies are essential for safely managing pressure differentials, preventing equipment damage, and ensuring the safety of the wellbore and personnel. Available in a variety of configurations to meet different well conditions and requirements, our equalizing subs are constructed with precision and durability in mind. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Valve and Prong Type Equalizing Sub Assemblies means opting for a product backed by expertise, innovation, and commitment to quality. We pride ourselves on providing solutions that not only meet but exceed the rigorous demands of the oil and gas industry. Whether you are facing standard operational tasks or unique downhole challenges, our equalizing subs provide the performance and reliability essential for success. Incorporating our Valve and Prong Type Equalizing Sub Assemblies into your downhole toolkit is a step towards enhanced operational efficiency, safety, and success. With HOCA Oil Tools, you gain more than just equipment; you gain a partner dedicated to supporting your downhole challenges with state-of-the-art solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and take the first step towards optimized operations. Partner with us and leverage the power of advanced downhole solutions designed to enhance your oilfield success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards in efficiency, safety, and performance in the oil and gas industry. View Details

3-1/2" WR-SCSSSV FXE

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”

The 3-1/2" WR-SCSSSV FXE is a Ballycatter model safety valve specifically designed for installation in the upper wellbore to provide an emergency shut-off of the production flow path. This valve plays a crucial role in well control by isolating the wellbore during emergency situations such as system failures or damage to surface production control facilities. Its fail-safe design ensures that the valve automatically closes to protect the wellbore and surface equipment whenever a fault occurs.

This safety valve is a flapper-type valve that is both surface controlled and wireline retrievable, allowing operators to easily deploy, operate, and retrieve the valve without extensive well intervention. The valve is installed within a corresponding model Landing Nipple, ensuring precise fit and reliable operation within the tubing string.

The design incorporates a self-equalizing mechanism that balances pressure differentials across the valve, which helps maintain consistent performance even under varying downhole pressures. This self-equalizing feature reduces the risk of valve malfunction due to unexpected pressure changes.

When the valve is in the open position, the sealing surfaces are positioned outside the flow path, ensuring that the fluid can pass freely without obstruction or erosion on the sealing components. This arrangement optimizes flow efficiency and helps extend the valve’s operational life. The flapper itself is made from solid bar stock, providing a strong and durable barrier that can withstand the harsh conditions found in high-pressure well environments.

The valve is rated for working pressures up to 10,000 psi, allowing it to operate reliably under high-pressure well conditions. The 3-1/2" WR-SCSSSV FXE is designed to ensure wellbore isolation in emergency situations, providing a critical safety function in the well control system.

View Details

Bottomhole Pressure Instrument Hangers and Tools

Elevate Downhole Efficiency with HOCA Oil Tools' BHP Tools for Landing Nipples In the sophisticated world of downhole operations, where precision and efficiency govern success, the significance of specialized tools cannot be overstated. HOCA Oil Tools, at the forefront of downhole technology, proudly presents our line of BHP Tools for Landing Nipples, specifically engineered to support wireline operations and ensure seamless integration and functionality in landing nipple environments. HOCA's BHP Tools for Landing Nipples: Unmatched Precision and Reliability Designed with the end-user in mind, our BHP Tools for Landing Nipples offer a comprehensive solution for monitoring bottom-hole pressure (BHP) and other downhole parameters. These tools are essential for optimizing wireline operations, allowing for accurate data recording and ensuring the safe and secure placement of geophysical instruments within landing nipples. Crafted from premium materials and engineered to withstand the challenging downhole environment, our BHP tools exemplify our dedication to quality, innovation, and reliability. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we understand the challenges faced in the oil and gas industry and are committed to providing solutions that enhance operational success. Our BHP Tools for Landing Nipples represent this commitment, offering a level of precision, efficiency, and reliability that sets new industry standards. Choosing HOCA’s BHP Tools for your downhole operations means not only equipping yourself with superior tools but also partnering with a company that stands behind its products with unparalleled support and expertise. Opt for HOCA Oil Tools for your landing nipple needs and take your downhole operations to the next level. Partner with us to leverage the advantages of our BHP Tools and experience enhanced operational efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, elevate your wireline operations with tools that blend innovation with reliability – driving your success downhole. View Details

LM2500 Fixture, Hinge for Upper Compressor Case

LM2500 Fixture, Hinge – Upper Compressor Case is a specialized tool set designed to safely raise and hinge open the upper compressor case of the LM2500 gas turbine engine. This fixture is essential during major maintenance, inspection, or overhaul activities where access to the engine’s internal compressor components is required.

The fixture allows maintenance teams to lift and securely hold the heavy upper compressor case in a hinged, open position. This provides stable and safe access to the compressor rotor and other internal parts, ensuring technicians can carry out detailed inspections or repairs without risking damage to sensitive components.

Made from strong, durable materials, the fixture set is built to support the heavy upper compressor case while keeping everything properly aligned. Its reliable locking and hinge system holds the case securely in place, helping protect the gas turbine.

Compatible with both OEM and MRO procedures, this fixture supports efficient, repeatable maintenance practices and helps reduce overall engine downtime. Whether used in the field or in a dedicated maintenance facility, the LM2500 Hinge Fixture is a critical tool for safe and effective servicing of the LM2500 engine’s compressor section.

View Details

Mesh Network Design and Installation

Pioneering Mesh Network Solutions for the Oil and Gas Industry: Nulux Leads the Way The oil and gas industry, characterized by its vast operations, challenging terrains, and the imperative for seamless communication, is a sector where reliable connectivity can make a profound difference. In this intricate web of operations, Mesh Network Design and Installation by Nulux Network Solutions emerges as the paramount solution for engineering professionals in the industry. Understanding Mesh Networks Unlike traditional Point-to-Point (P2P) or Multipoint configurations, mesh networks form a web of interconnected devices. Each node or device in this network is connected to multiple others, creating a network where information can take several paths to its destination. This interconnectedness ensures that even if one node fails, the network remains intact by rerouting data through other nodes, offering unparalleled reliability. Why Mesh Networks are a Game Changer for Oil and Gas Operations Robust Connectivity: Given the sprawling nature of oil and gas facilities, with sites spread across large geographic areas and often in remote locations, a mesh network ensures that there's no single point of failure. This robustness is crucial for operations where downtime can result in significant financial and operational setbacks. Scalability: As operations expand or evolve, mesh networks can be effortlessly scaled. With every new device acting as a node, the network becomes more resilient and extensive. Efficient Data Flow: With the capability to choose the quickest route for data transmission, mesh networks optimize the flow of information, ensuring timely decision-making and operational efficiency. Nulux's Expertise: Meshing Excellence with Experience Having an extensive background in various wireless infrastructures, Nulux Network Solutions has channeled its expertise into creating mesh network solutions that cater specifically to the challenges faced by the oil and gas industry. Customized Solutions: Recognizing that each operation is unique, our team tailors mesh network designs to align with the specific needs and challenges of each facility. End-to-End Service: From the initial design phase to the final installation, Nulux ensures that every aspect of the mesh network is handled with precision, ensuring optimal performance. Future-Ready: In an industry that's rapidly embracing digitization and smart technologies, our mesh networks are designed to be future-ready, compatible with emerging tech and capable of integrating with IoT devices and sensors. Driving Operational Efficiency with Wireless Solutions Beyond mesh networks, Nulux is committed to offering a comprehensive suite of wireless solutions. From designing Wireless Access Points (WiFi) that cater to bustling work environments to implementing secure and cost-effective Point-to-Point (P2P) networks, Nulux remains at the forefront of wireless tech, ensuring that the oil and gas sector is always one step ahead in its communication game. Conclusion In a sector where operational efficiency, safety, and timely decision-making are paramount, having a reliable communication network is non-negotiable. Nulux Network Solutions, with its cutting-edge Mesh Network Design and Installation services, offers the oil and gas industry a chance to revolutionize its communication infrastructure. Connect with us and let's chart a path to seamless connectivity together. View Details

7" Mech-1 Single Grip Mechanical Set Packer for 38 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

O-rings and Gaskets for various applications including re-dress of downhole equipment

An O-ring, also known as a packing or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, forming a seal at the interface. View Details

Check Valve Poppet Type – Tube Ends 1/4" NPT – 6000 PSI – ISO 9001

The Check Valve Poppet Type with 1/4" NPT tube ends is a compact, high-performance valve designed to provide reliable one-way flow control in hydraulic and pneumatic systems. Built for demanding applications, this valve is rated up to 6000 PSI working pressure, making it suitable for both high-pressure and industrial environments.

The poppet design ensures a tight seal when backflow occurs, preventing fluid from moving in the reverse direction while allowing free flow in the intended direction. This not only protects sensitive system components but also maintains system efficiency by eliminating leakage.

With a cracking pressure typically available from 1 to 25 psi, the valve can be selected to suit specific operational needs, ensuring smooth opening without unnecessary resistance. The female NPT tube end connection provides a secure, leak-free fit, compatible with a wide range of standard piping and tubing systems. Constructed from durable stainless steel or carbon steel depending on configuration, the valve offers excellent resistance to wear, corrosion, and high-pressure fatigue.

Commonly used in oil and gas, the poppet-type check valve provides consistent performance, low maintenance requirements, and long service life.

Its simple yet effective design ensures operators can trust it in critical applications where preventing reverse flow is essential for safety and operational reliability.

View Details

Check Valve Poppet Type – Male x Female 1/4" NPT – 6000 PSI – ISO 9001

The 1/4" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet design provides fast response and reliable sealing under pressure, ensuring protection of pipelines, pumps, and other critical equipment from damage caused by reverse flow or pressure fluctuations.

The 1/4" size is ideal for small diameter lines, instrumentation, sampling, or control applications where space is limited and precise flow control is required. Male × female connections allow secure inline installation and integration into existing piping without the need for additional fittings, reducing potential leak points and simplifying system layout.

Factory tested for cracking and reseal performance, the valve has a standard working pressure of 6000 psi, with optional ratings up to 10000 PSI. It offers selectable cracking pressures from 1/3 to 25 psi, making it adaptable to various flow requirements. The valve is available in corrosion resistant materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, suitable for demanding oil and gas environments. Heat code traceability ensures quality and material verification, and additional testing options including vibration, temperature, and helium testing are available for critical applications.

View Details

Wisdom Lamp 4A

Illuminate Your Adventures with the Wisdom Lamp 4A: The Ultimate Multi-Purpose Headlamp from Provix Provix is thrilled to introduce the Wisdom Lamp 4A, a versatile and powerful multi-purpose headlamp designed to meet a variety of lighting needs. Whether you're a professional in the mining industry or an outdoor enthusiast, the Lamp 4A is engineered to provide exceptional illumination and functionality. Powerful and Versatile Lighting Options The Lamp 4A features three brightness modes: High (HI), Medium (ME), and Low (LO), catering to different lighting requirements. With an impressive light luminous flux of 533 lm (HI), 265 lm (ME), and 50 lm (LO), and an initial lighting degree of 25,000 lx (HI), 12,000 lx (ME), and 1,800 lx (LO), this headlamp ensures clear visibility in various environments. Long-Lasting and Rechargeable Battery Equipped with a robust 7,000mAh battery and a rated voltage of 3.7V, the Lamp 4A provides continuous discharging times of 5 hours (HI), 13 hours (ME), and 60 hours (LO). The battery is rechargeable, offering up to 1,200 cycles in reasonable working conditions, making it both sustainable and reliable. Unique Feature: Charge Your Cellphone In addition to its lighting capabilities, the Lamp 4A can charge your cellphone, making it a handy tool for emergencies or outdoor activities. This unique feature, coupled with its USB charging ability and a quick 5-hour charging time, adds to its versatility and appeal. Built for Durability and Safety The Lamp 4A is designed with safety in mind. It is water-proof with an IP68 rating and includes a short circuit protection time of less than 320μs. Its durable design ensures it withstands harsh conditions, suitable for both professional and recreational use. Lightweight and Compact Design Weighing just 169g (5.96 oz) and with dimensions of 84x69x50mm (3.3x2.7x2.0in), the Lamp 4A is compact and comfortable to wear, making it ideal for extended use without causing fatigue. SOS Function for Emergency Situations An added SOS function makes the Lamp 4A a vital tool for emergency situations, providing an extra layer of safety during outdoor adventures or in hazardous work environments. Get Your Wisdom Lamp 4A Today The Wisdom Lamp 4A is available now at Provix, ready to light up your work and adventures with its exceptional features. . Experience the difference with the Lamp 4A – your reliable companion in lighting. View Details

LM2500+G4 SAC 50Hz CC 1x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

View Details