The Tube Fittings Male Elbow NPT is a mechanical fitting that provides a 90° connection between tubing and components with National Pipe Taper (NPT) threads. It is designed for use in high-pressure systems with operating pressures up to 6000 PSI.

The elbow configuration allows tubing runs to change direction while maintaining a sealed joint. Threads are tapered in accordance with NPT standards to create a pressure-tight seal when properly installed.

These fittings are produced in a range of sizes from 1/4” to 1” and are manufactured in line with ASME B16.34, MSS-SP-99, and ASME B31.3 requirements. Typical applications include oil, gas, and industrial process systems where tubing must be connected to threaded equipment or piping at an angle.

Square Body Needle Valves Male x Female are engineered for precise flow control and isolation in high-pressure piping systems. The square body design provides a rigid, compact structure that allows for stable mounting, easy wrench access, and alignment during installation. The male and female threaded ends enable secure connections to instrumentation, piping, or process equipment, ensuring leak-tight operation.

These valves are used in oil and gas applications such as connecting impulse lines, controlling flow to pressure transmitters, and isolating instrumentation for maintenance or calibration. The square body allows for easy integration into compact manifolds or tight piping layouts where space and alignment are critical.

Constructed to meet ASME B16.34 and MSS-SP-99 standards, the valves are rated for standard working pressures of 6000 psi, with optional higher-pressure ratings available. They operate effectively over a wide temperature range and are factory-tested for seat and packing leakage, ensuring reliable, consistent performance in demanding field conditions.

The HDI 2000P Pressure Gauge System is a solid-state electronic gauge designed to provide accurate and reliable pressure measurement in demanding industrial and oilfield environments. It is suitable for monitoring pressures up to 20,000 psi and is built to operate safely in hazardous locations.

The system includes a gauge display, inline cable, and a matched pressure sensor. The gauge features a 6-inch diameter LCD with a numeric display and a 101-segment analog bar graph for trend indication. The display is visible from up to 35 feet and is designed for use in varying lighting conditions.

Powered by a field-replaceable 3.6 V battery pack, the system supports continuous operation with minimal power consumption. Battery life is typically around 18 months, with a one-year guarantee. Calibration data is retained when powered off.

The pressure sensor uses a 3.5K strain gauge and is available in multiple pressure ranges. Sensors can be interchanged within specified ranges to reduce spare parts inventory. Connection types include 1” NPT, 2” line thread, ANSI or API flanges, 9/16” Autoclave, and 2” WECO.

Optional outputs include 4-20 mA and 0-1 Vdc signals for integration with chart recorders, PLCs, and remote displays. A remote display (slave gauge) option allows duplication of the pressure reading at another location.

The gauge and sensor are factory calibrated as a matched pair to ±0.50% full-scale accuracy. Calibration and configuration settings are stored in non-volatile memory and can be updated or reset by the user.

The 2000P Pressure Gauge System provides reliable pressure measurement with low maintenance requirements for industrial and oilfield applications.

The 1/4" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet design provides fast response and reliable sealing under pressure, ensuring protection of pipelines, pumps, and other critical equipment from damage caused by reverse flow or pressure fluctuations.

The 1/4" size is ideal for small diameter lines, instrumentation, sampling, or control applications where space is limited and precise flow control is required. Male × female connections allow secure inline installation and integration into existing piping without the need for additional fittings, reducing potential leak points and simplifying system layout.

Factory tested for cracking and reseal performance, the valve has a standard working pressure of 6000 psi, with optional ratings up to 10000 PSI. It offers selectable cracking pressures from 1/3 to 25 psi, making it adaptable to various flow requirements. The valve is available in corrosion resistant materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, suitable for demanding oil and gas environments. Heat code traceability ensures quality and material verification, and additional testing options including vibration, temperature, and helium testing are available for critical applications.

The Bore Through Male Connector NPT fittings are engineered to create robust, leak-free connections in high-pressure systems. These fittings feature a bore-through design, allowing fluid or gas to flow freely without obstruction, which minimizes pressure drop and ensures consistent system performance. Made from high-quality materials, they are suitable for pressures up to 6000 PSI and are manufactured to meet ASME B16.34, MSS-SP-99, and ASME B31.3 standards.

The NPT (National Pipe Thread) male connection ensures a tight seal when connected to compatible threaded components, providing reliable performance in oil and gas, chemical, and process industries. The fittings are precision-machined for proper ferrule deformation, which ensures leak-free connections under vibration, impulse, or vacuum conditions. Silver-plated threads reduce friction and prevent galling, while the bore-through design supports high flow rates without obstruction.

Bore Through Male Connector NPT fittings are easy to install and maintain. They are finger-tight for initial assembly and then wrench-tightened to achieve a secure seal, reducing installation errors and downtime. Their design allows disconnection and reconnection without compromising sealing integrity, making them suitable for applications requiring frequent maintenance or system modifications.

These fittings are unique in combining full-flow capability, high-pressure performance, and reliable sealing in a compact, easy-to-install form, making them ideal for demanding oil and gas systems, process lines, and high-pressure instrumentation setups.

In oil and gas systems, controlling the direction of fluid flow is critical to protect pipelines, pumps, and equipment. The 1/4" poppet type check valve with female × female NPT connections provides reliable uni-directional flow, preventing backflow and maintaining system integrity. Its compact size makes it ideal for small diameter lines, instrumentation, sampling, and control applications, while the female × female connections allow secure inline installation without additional fittings.

The valve has a standard working pressure of 6000 PSI, with optional configurations rated up to 10000 PSI. Selectable cracking pressures from 1/3 to 25 PSI allow precise adaptation to system requirements. It is available in corrosion-resistant materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability guarantees quality and material verification, and additional testing, including vibration, temperature, and helium, is available for applications requiring maximum reliability.

The 45° Elbow NPT Thread Tube Fitting is a specialized connector used to change the direction of flow in piping systems by 45 degrees. Manufactured to precise standards, it provides a strong, leak-resistant connection between tubes with NPT threads, ensuring consistent system performance. The fitting is suitable for use in oil, gas, and industrial process systems, where controlling flow direction and minimizing stress on tubing is critical.

Its design allows compact and efficient piping layouts, reducing the need for multiple fittings while maintaining smooth fluid flow. The fitting is machined to ensure tight tolerances, providing reliable sealing even under vibration, thermal expansion, or pressure fluctuations. Case-hardened threads improve durability, while the material selection ensures compatibility with common industrial fluids and gases.

Unique to this fitting is its ability to create a precise 45° angle connection without compromising the integrity of the tubing system, making it ideal for applications where space is limited or exact routing is required. Installation is straightforward: the tube is inserted into the fitting, and the NPT threads create a secure mechanical seal that resists leakage over extended operational periods.

The H Type 3 Valve Manifold – Flange to Flange is designed for connecting impulse lines and differential pressure transmitters in oil and gas and industrial process applications. It consists of two block valves, one equalizer valve, and two ¼” Female NPT vent/test connections, providing accurate isolation, calibration, and maintenance of instrumentation.

The manifold is rated for a standard working pressure of 6000 PSI, with maximum ratings up to 10000 PSI available on request. Temperature ratings range from -50°C to 230°C, with 500°C possible using graphite seals. The body features a metal-to-metal seal for high pressure and temperature applications, eliminating the need for O-ring seals, and materials can be supplied according to NACE MR 01 75 standards.

Each valve is 100% factory tested per international pressure standards, including pneumatic testing with nitrogen at 1000 PSI for seat and packing leakage, with a maximum allowable leak rate of 0.1 sec/min. Stems have back seats, rolled threads, and self-centering non-rotating tips for consistent, leak-free operation. The H Type design allows reliable, safe, and precise operation in high-pressure, high-temperature process environments.

The Monoflange DBB Double Block and Bleed Valve with Needle-Needle-Needle configuration is designed to provide dual isolation and safe venting in oil and gas, chemical, and process systems. Both isolation points use needle valves, allowing precise control of flow and pressure in the cavity between the two isolation points, which minimizes leakage and ensures accurate venting. This configuration is particularly suited for instrument and gauge isolation, chemical injection, and sampling applications, where fine control and safety are critical.

The monoflange design integrates the two isolation valves and the bleed into a single compact body. This eliminates the need to bolt together separate valves, reducing the number of joints, potential leak paths, and overall weight, while saving installation space and simplifying maintenance. The valve can accommodate flange sizes from 1/2” to 2” and is rated for Class 150 to Class 2500, making it suitable for a wide range of high-pressure applications.

Manufactured to recognized industry standards including ASME B16.34, API 6D, and ISO 17292, the valve is available in a variety of materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional NACE MR-0-175 compliant materials are available for corrosive environments. In-built vent valves and low emission testing ensure the valve meets stringent safety and environmental requirements, providing a reliable solution for critical fluid control applications.