Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Casing Collar Locator (CCL)

Precision Depth Control with InWaTec Combined's Casing Collar Locator Services Precise depth measurement is the linchpin of successful well completion and intervention. At InWaTec Combined, we recognize the pivotal role of accurate depth correlation in the lifecycle of a well, which is why we offer our specialized Casing Collar Locator (CCL) Services. These services are not just about measurement; they are about enhancing the precision of every operation that follows. The CCL is an essential tool in our suite of downhole diagnostic services, used to establish an accurate depth correlation between the casing collars and the open hole log of the well. This correlation is vital for a multitude of subsequent operations, particularly for the strategic placement of perforations and the depth assurance of wireline services within the cased hole. Typically run in tandem with a gamma ray, Cement Bond Log (CBL), or other cased-hole logging tools, our CCL services ensure that completion depths chosen from open hole logs are accurately transferred to the cased well environment. This step is critical because it anchors the location of future operations to a verified depth reference, ensuring that all interventions are performed at the intended stratigraphic intervals. The CCL log becomes a key depth control measurement, serving as a guide for precision perforating. It allows us to target the exact depth for the perforation guns, ensuring that we connect the wellbore to the hydrocarbon-bearing zones with pinpoint accuracy. This service is particularly crucial in complex wells where even small deviations can lead to significant complications. At InWaTec Combined, we understand that the integrity and success of cased-hole wireline services hinge on the reliability of depth measurements. Our CCL services provide a foundation of certainty upon which all subsequent interventions can confidently build. With our CCL technology, clients can expect a seamless transition from logging to completion, perforating, and beyond. Opting for InWaTec Combined's CCL Services means choosing a partner committed to precision and reliability. Our advanced tools, combined with our expert analysis, provide the clarity and assurance needed to execute well interventions with confidence. Ensure your operations are grounded in accuracy with InWaTec Combined, where every millimeter counts towards the success of your well. View Details

NWB-25 Charger

Maximize Your Mining Equipment's Performance with the Wisdom NWB-25A Charger from Provix Provix is proud to introduce the Wisdom NWB-25A Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This advanced charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Universal Compatibility and High Efficiency The NWB-25A Charger is versatile and adaptable, with AC input compatibility ranging from AC 100-240V +/- 10%, 0.3A, 50-60 Hz, ensuring it can be used in various locations around the world. It also features a DC input of 7~30 V, 1.7 A, making it suitable for a wide range of applications. Optimized Charging for Wisdom Equipment Designed to work seamlessly with Wisdom's range of mining lamps, the NWB-25A offers a maximum DC output voltage of 4.56 ± 0.05 V and a DC output current of 2400 mA ± 100 mA. This ensures fast and efficient charging times: 5 hours for the KL8M, 4-5 hours for the KL5M, and 6 hours for the KL12M, minimizing downtime and enhancing productivity. Global Standards Compliance The NWB-25A Charger is equipped with AC plugs that conform to US, EU, UK, or AU standards, catering to different markets and ensuring compliance with global electrical standards. This feature makes the NWB-25A ideal for mining companies operating in multiple countries. Compact and Lightweight Design With its compact size (116 x 76 x 56 mm; 4.6 x 3.0 x 2.2 in) and light weight (215 g; 7.58 oz), the NWB-25A is highly portable, easy to transport, and convenient to use in various settings, from mining sites to office environments. Enhance Your Charging Experience The Wisdom NWB-25A Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit www.provix.net or contact our expert team. View Details

Geotechnical ROV tooling skid

Unleashing the Power of Customization: Introducing Geotechnical ROV Tooling Skid We understand that every subsea mission is unique, and each underwater challenge demands a tailored approach. That's why we are thrilled to present our latest innovation - the Custom Designed Geotechnical ROV Tooling Skid. This revolutionary tooling solution empowers you to optimize your ROV's capabilities for geotechnical exploration like never before. Designed for Your Mission No two subsea projects are alike, and we believe that your equipment should reflect that. Our Geotechnical ROV Tooling Skid is designed with customization at its core. Our team of experts works closely with you to understand the specific requirements of your mission, ensuring that the tooling skid is precisely tailored to suit your needs. Versatility Redefined The Geotechnical ROV Tooling Skid is engineered to be highly versatile, accommodating a wide range of geotechnical tasks. From seabed sampling and sediment coring to geophysical surveying and subsea drilling, this tooling skid is your ultimate companion in the quest for understanding the ocean floor. Precision and Control When it comes to geotechnical operations, precision is paramount. Our tooling skid is equipped with state-of-the-art controls that offer you unparalleled accuracy and maneuverability. You'll have complete control over your ROV's movements, allowing you to navigate complex terrains with ease. Robust and Reliable Durability and reliability are critical in the challenging subsea environment. We take great pride in the craftsmanship of our Geotechnical ROV Tooling Skid, ensuring that it can withstand the rigors of deep-sea missions. Built with high-quality materials and cutting-edge engineering, this tooling skid is built to last. Expandable and Future-Proof We understand that subsea exploration is an evolving field, and your equipment should be able to keep up with advancements. Our Geotechnical ROV Tooling Skid is designed to be expandable and future-proof. As your mission requirements evolve, the tooling skid can be easily adapted to integrate new sensors, tools, or functionalities. Unmatched Expertise With years of industry experience, our engineers and technicians have an in-depth understanding of the challenges faced in the subsea domain. You can trust us to deliver a custom-designed tooling skid that aligns perfectly with your project's objectives. Your Partner in Subsea Excellence Our commitment to innovation, quality, and customer satisfaction drives us to deliver cutting-edge solutions that transform the way you explore the ocean's depths. Unleash Your ROV's Potential Are you ready to revolutionize your geotechnical exploration capabilities? Unlock the power of customization with the Geotechnical ROV Tooling Skid. Let us work together to design a tooling solution that matches your mission's unique requirements. Contact us today to embark on a new era of subsea possibilities. View Details

5 inch K Storm Choke

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Fishing Tool Strings

Retrieving Success: InWaTec Combined’s Expert Wireline Fishing Tool Services In the demanding environment of well intervention, the unforeseen loss of equipment downhole is a challenge that operators must be prepared to address promptly and efficiently. InWaTec Combined's Wireline Fishing Tool Services are the epitome of precision and reliability, providing a lifeline when well intervention tools or other equipment become unintended tenants of the wellbore. Our Wireline Fishing Tool Services are designed for success, equipped with a full spectrum of specialized mechanical tools that offer a robust solution for retrieval operations. The expertise behind our services is matched by the quality and variety of tools in our standard fishing toolbox, including: Wireline Clamp: A vital tool for securing and retrieving wireline equipment, ensuring that no further slipping occurs during retrieval operations. Wireline Grab: Our grabs are adept at latching onto equipment, providing a firm grip that is essential for the successful extraction of fallen tools. Wireline Finder: A precision instrument that aids in locating lost equipment within the wellbore, ensuring that our operations are targeted and effective. Overshots: These tools are designed to fit over and engage with the fish, facilitating an efficient recovery process. Tubular Jars: Employed to deliver impacts to dislodge stuck equipment, our jars are selected for their reliability and force-delivery precision. Heavy Duty Pulling Tool: For items that require significant force for retrieval, our heavy-duty pulling tools are up to the task, combining strength with control. Wireline Cutters: When the situation calls for severing wireline or other materials to free the fish, our cutters are engineered to slice through with minimal fuss. At InWaTec Combined, we understand that every fishing operation presents its own set of challenges. That's why our services are not only comprehensive but also customizable. We analyze the specifics of each fishing scenario and select the appropriate tools from our toolbox to ensure a successful outcome. Our team of well intervention specialists is highly trained and experienced, ready to deploy at a moment's notice to address your fishing needs. With InWaTec Combined's Wireline Fishing Tool Services, you gain more than just a service provider; you gain a partner who is as invested in the success of your operations as you are. Choose InWaTec Combined for your wireline fishing tool needs and experience the peace of mind that comes from knowing that you have the best in the business on your side. Let us help you turn setbacks into success stories with our expert fishing tool services—because in the world of well intervention, the right retrieval is everything. View Details

Slickline Rope Socket

HOCA Oil Tools B.V.'s Expertise in Slickline Rope Sockets In the dynamic world of oil and gas extraction, precision and reliability are paramount. At HOCA Oil Tools B.V., we take pride in our extensive expertise in slickline operations, particularly our specialized rope sockets designed for varied downhole conditions. Our product range includes Type ‘AO’, ‘AD’, ‘AS’, ‘BO’, ‘BD’, ‘BS’, ‘CO’, ‘CD’, ‘CS’,‘CGO’, ‘D’, ‘DD’, ‘DS’, ‘GO’, ‘RC’, ‘SA’, ‘HO’, and ‘HD’ rope sockets, each tailored for specific wireline tasks and environmental conditions. Our rope sockets are crafted from high-quality alloy materials, ensuring durability and optimal performance. They cater to a wide range of wire sizes and types, accommodating single-strand, multi-strand, and encapsulated lines. With features like spring disc supports, releasing slips, and heavy-duty clamps, our rope sockets ensure secure connections and safe operations under intense downhole pressures. The main features of some of the various rope sockets offered by HOCA Oil Tools B.V. are as follows: Type ‘CGO’ Rope Socket: Designed for use with small stranded lines up to 1/4” diameter, this rope socket has an additional swivel bottom, making it similar in design to the Type ‘CO’ but with enhanced functionality for specific applications requiring rotation. Type ‘D’ Dummy Rope Socket: Available with threaded or QLS Connections, this tool can be attached to other types of tools with a pin connection for various wireline applications, offering great versatility and adaptability in operational setups. Type ‘GO’ Rope Socket: Engineered specifically for single conductor cable heads, providing secure and reliable connections for specialized wireline operations. Type ‘RC’ Rope Socket: This assembly is tailored for encapsulated line applications, offering enhanced protection and durability for operations involving encapsulated cables. Type ‘SA’ Rope Socket: Designed for swabbing applications with Babbitt fill, this rope socket is tailored for operations requiring the retrieval of fluids from wells, ensuring efficient and reliable performance. Type ‘HO’ and ‘HD’ Heavy Duty Rope Socket: These are intended for heavy-duty wireline work and feature a unique design that traps the wire, held in place with socket screws, suitable for more demanding operations and environments. Each type of rope socket has unique features tailored to different wireline operations, ensuring that HOCA Oil Tools B.V. can provide a suitable solution for a wide range of downhole conditions and requirements. HOCA Oil Tools B.V. stands at the forefront of slickline technology, offering solutions that ensure safety, efficiency, and reliability. Our commitment to innovation and quality has established us as a trusted partner in the oil and gas industry worldwide. View Details

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 28-32 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Water Injection Safety Valve 4.25 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Isolation Packer HP-2 Hydraulic Set 5 1/2" Packer 20-23 PPF

The Ballycatter WC-HP-2 Isolation Packer is a hydraulic-set, single-string tandem packer designed for multiple-zone well completions.

Its primary function is to act as the upper packer in a stacked packer system, working in conjunction with a lower hydraulic retrievable packer to create a sealed isolation zone between them.

This allows for selective treatment, injection, or production within specific well intervals. Additionally, the WC-HP-2 packer can be used to seal off casing holes or perforations, providing an effective solution for low-pressure well applications.

View Details

Valve Manifolds 3 Valve Manifold H Type – Flange to Flange – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The H Type 3 Valve Manifold – Flange to Flange is designed for connecting impulse lines and differential pressure transmitters in oil and gas and industrial process applications. It consists of two block valves, one equalizer valve, and two ¼” Female NPT vent/test connections, providing accurate isolation, calibration, and maintenance of instrumentation.

The manifold is rated for a standard working pressure of 6000 PSI, with maximum ratings up to 10000 PSI available on request. Temperature ratings range from -50°C to 230°C, with 500°C possible using graphite seals. The body features a metal-to-metal seal for high pressure and temperature applications, eliminating the need for O-ring seals, and materials can be supplied according to NACE MR 01 75 standards.

Each valve is 100% factory tested per international pressure standards, including pneumatic testing with nitrogen at 1000 PSI for seat and packing leakage, with a maximum allowable leak rate of 0.1 sec/min. Stems have back seats, rolled threads, and self-centering non-rotating tips for consistent, leak-free operation. The H Type design allows reliable, safe, and precise operation in high-pressure, high-temperature process environments.

View Details

Supply Vessels for Offshore Support

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Stand off Protector

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

ROV Transport Case

Secure Your ROV with the Rugged Transport Case When it comes to transporting your valuable subsea equipment, no compromises should be made. We understand the importance of safeguarding your investment during transit, which is why we are proud to introduce our ROV Transport Case – the ultimate solution for secure and worry-free ROV transportation. Built for the Toughest Challenges Whether you are deploying your ROV for offshore inspections, scientific research, or search and rescue missions, our ROV Transport Case is engineered to withstand the toughest challenges. Crafted from durable and rugged materials, this case ensures your ROV remains well-protected, even in the most demanding and unpredictable environments. Custom-Cut Foam for Precision Protection We know that every ROV is unique, and that's why our ROV Transport Case is designed with customizable precision. The case is filled with closed-cell custom-cut foam, meticulously shaped to fit your specific ROV model. This snug and secure fit prevents any shifting or potential damage during transit, providing unmatched protection for your subsea equipment. Safety First, Always Safety is at the forefront of everything we do. Our ROV Transport Case is no exception. With reinforced corners and edges, impact-resistant features, and secure locking mechanisms, this case ensures your ROV remains securely stored and protected throughout its journey, minimizing any potential risks during transport. Portability and Ease of Use Transporting your ROV shouldn't be a cumbersome task. Our ROV Transport Case is designed with portability and ease of use in mind. The case features rugged handles and ergonomic design, making it effortless to carry and move around, even in challenging terrains. With our case, you can focus on your mission, knowing your ROV is safely stored and ready for action when you reach your destination. Years of Experience With years of experience in subsea robotics and ROV technology. Our commitment to quality and innovation drives us to deliver products that exceed expectations. The ROV Transport Case is a testament to this dedication, providing our customers with a reliable and durable solution for transporting their valuable subsea equipment. Secure Your ROV Today Safeguard your investment and ensure worry-free transit with our ROV Transport Case. Contact us today to learn more about this product and other cutting-edge solutions for your subsea missions. Embrace the power of protection. View Details

Pull and set Mechanical Plugs

InWaTec Combined: Streamlining Well Integrity with Expert Mechanical Plug Operations In the intricate sphere of well servicing, the ability to effectively isolate sections of the wellbore is crucial. At InWaTec Combined, we specialize in providing top-tier Pulling and Setting Mechanical Plug services that ensure well integrity through precision and reliability, all achieved via mechanical wireline manipulation. Sophisticated Simplicity in Well Isolation Our mechanical plug services are designed to provide a seamless solution for wellbore isolation. The mechanical plugs can be set using the finesse of wireline operations alone, without the need for complex hydraulic systems. This method exemplifies our commitment to sophisticated yet simple solutions, providing our clients with a straightforward and efficient means to secure their wells. Tailored Tools for Diverse Requirements Recognizing that wells come in various sizes and specifications, InWaTec Combined has developed a selection of running tools to match. Depending on the size of the mechanical plug, we employ one of two specialized running tools. Each tool is designed to engage with the plug precisely, ensuring a secure and accurate setting every time. Versatility Across Operations Whether it’s a routine intervention or an emergency response, our Pulling and Setting Mechanical Plug services are versatile enough to adapt to the specific needs of the operation. This versatility is a testament to the depth of our expertise and the breadth of our technological capabilities. Efficiency in Execution The use of mechanical wireline manipulation for setting and pulling plugs not only provides precision but also enhances operational efficiency. By eliminating the need for additional hydraulic equipment, we can execute operations more quickly, reducing downtime and optimizing well productivity. A Commitment to Operational Excellence At InWaTec Combined, our services are underpinned by a steadfast commitment to operational excellence. We don’t just deliver tools and technologies; we provide a partnership that prioritizes the integrity and productivity of your well operations. Our experienced technicians and state-of-the-art equipment stand ready to deliver results that exceed expectations. Conclusion: Ensuring Well Integrity with Precision In conclusion, InWaTec Combined's Pulling and Setting Mechanical Plug services represent the pinnacle of well intervention solutions. Our precision-engineered tools and expert wireline manipulation techniques ensure that well integrity is maintained with the utmost efficiency and reliability. Trust InWaTec Combined to be your partner in well servicing operations, where every plug set is a step towards ensuring the ongoing success and safety of your well activities. View Details

Valve Manifolds 3 Valve Manifold T Type – Pipe to Flange 1/2” Female NPT – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 3 Valve Manifold T Type – Pipe to Flange is specifically engineered to connect impulse lines to differential pressure transmitters, ensuring accurate measurement and reliable operation in industrial systems. Its T-type configuration features two block valves, one equalizer valve, and vent/test ports, allowing operators to isolate the transmitter, equalize pressure, and perform maintenance or calibration safely without disrupting the overall process. This setup is particularly useful in oil and gas, petrochemical, and process control applications where continuous operation is critical.

The manifold is built with 1/2” Female NPT Pipe to Flange connections set on 54mm (2-1/8”) centers, providing standardized and secure interfacing with pressure transmitters. High-quality construction includes metal-to-metal body and bonnet seals to withstand pressures up to 6000 PSI and temperatures ranging from -50°C to 230°C, with higher temperature ratings available using graphite materials. The design ensures leak-free performance through features such as self-centering, non-rotating valve tips, back-seated stems for added security, and rolled threads for smooth operation.

Additional operational benefits include easily adjustable gland retainers for maximum packing stability, removable T-handles for low-torque operation, and dust caps to protect actuating threads. Each valve is 100% factory tested, with traceable heat codes, and meets rigorous standards including ASME B16.34, MSS-SP-99, and ASME B31.3, making the manifold a robust and reliable solution for high-pressure industrial applications.

View Details

Safety Valve for Water Injectors 5.71 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Electric Submersible Pump Straight Pull 4.5" Packer

The Ballycatter Model WC-ESP Straight Pull 4.5” Packer is a compact, hydraulic-set production packer optimized for ESP completions in 4.5” casing. It features a pass-through section for ESP power cables, allowing seamless electrical connectivity between the surface and the ESP unit below.

The single-mandrel design with Acner Array Packing Element ensures superior sealing integrity, even in high-pressure and high-temperature wells. Its bi-directional slip system resists pressure from both above and below, providing secure anchoring and preventing unwanted movement.

Setting is achieved hydraulically by applying tubing pressure, locking the packer in place for long-term well isolation. Retrieval is simplified through a straight pull mechanism, eliminating the need for complex downhole tools and ensuring fast, efficient removal in standard and deviated wells. Compatible with all major ESP cable pack-off and feed-thru devices, the WC-ESP Straight Pull 4.5” Packer delivers reliability and ease of operation in compact wellbore conditions.

View Details

Equalizing Sub-Assembly

HOCA Oil Tools: Innovating Efficiency with State-of-the-Art Equalizing Subs In the ever-evolving landscape of the oil and gas industry, the need for precision and efficiency in downhole operations is paramount. At HOCA Oil Tools, we recognize this imperative and respond with our innovative Equalizing Subs. These tools are specifically designed to enhance the operational capabilities of sub-surface controls like Locking Mandrels and Tubing Mandrels, ensuring seamless and efficient downhole activities. HOCA’s Equalizing Subs: Engineered for Unmatched Performance Our Equalizing Subs are crafted to facilitate the equalization of pressure differentials across Sub-Surface Controls, crucial for the safe and effective retrieval of these components. Available in various types, including 'ROTB', 'ROTF', 'ROTC', 'ROTD', and others, each is designed to meet distinct downhole conditions and operational needs, ensuring versatility across different well environments. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools' Equalizing Subs means selecting a solution backed by innovation, quality, and unwavering support. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether addressing standard operations or facing unique downhole challenges, our Equalizing Subs provide the reliability and performance essential for today's downhole activities. Incorporating our Equalizing Subs into your operational toolkit is a step towards enhanced efficiency, safety, and success. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations. Partner with us to harness the power of advanced downhole solutions designed for the modern oilfield landscape. With HOCA Oil Tools, empower your downhole operations with tools that redefine efficiency, reliability, and performance in the oil and gas industry. View Details

Professional Hand Controller

Geotechnical exploration rig

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT View Details

FXE WR-SCSSSV 4-1/2 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Tank Truck for fluid hauling including potable water

Tank Trucks are used to transport a variety of liquids, such as chemicals, liquids, gases, beverages and dry goods, such as grain. Given the expensive and complex nature of tank truck equipment, the specialized skillset required of our drivers, and the increased regulatory environment facing, tank truck carriers deal with the challenges of all trucking companies and many which are unique to the tanker industry. Tank Trucks haul hazardous products, such as petroleum products, chemicals, gases, and hazardous wastes. They also haul non-hazardous materials such as bulk foods and dry bulk products such as cement. View Details

Bridge Plug Setting

Seamless Zone Isolation: InWaTec Combined’s E-line Bridge Plug Setting Services In the complex operations of oil and gas extraction, the ability to isolate zones within the wellbore is critical for effective production management and intervention. InWaTec Combined offers specialized E-line Bridge Plug Setting Services, utilizing state-of-the-art tools to achieve precise zonal isolation with both permanent and retrievable bridge plug options. Bridge plugs are essential elements in completion hardware, designed to provide robust seals both above and below the production tubing within the casing, liner, or wellbore wall. Their primary function is to isolate certain sections of the well, which is especially beneficial in wells with multiple producing zones or when specific zones need to be temporarily sealed off during interventions. Permanent Bridge Plugs: These are typically favored for their cost-effectiveness and superior sealing and gripping capabilities. Once set, they provide a dependable barrier, with metal slips or "slips" that anchor into the casing's inner diameter using sharpened, carburized teeth. The seal is completed with large cylindrical rubber elements, and in high-pressure environments, metal rings enhance the seal by preventing rubber extrusion. Retrievable Bridge Plugs: These plugs are the go-to solution when flexibility is required, such as during secondary recovery operations, well re-completions, or when there's a need to change out production tubing. Though they may have lower sealing and gripping capabilities compared to permanent options, their design allows for removal and reuse, providing significant operational versatility. Our E-line Bridge Plug Setting Services deploy these tools with precision. The plug is conveyed into the well via wireline—a method that provides real-time depth control and selectivity. Once at the target depth, an axial load is applied to the bridge plug to initiate the expansion of the slips and rubber elements, creating a secure seal against the casing. The setting mechanism can be activated hydraulically, mechanically, or with a controlled chemical charge, depending on the well conditions and client requirements. InWaTec Combined’s expertise ensures that the most appropriate setting method is chosen for each operation, considering the well's pressure environment, the desired duration of the plug setting, and the future plans for the well. By opting for InWaTec Combined’s E-line Bridge Plug Setting Services, operators benefit from a service that combines reliability with adaptability. Our commitment to leveraging advanced technologies with expert execution means that your well operations can proceed with confidence, knowing that each zone is isolated with the utmost precision. InWaTec Combined is dedicated to providing solutions that enhance operational efficiency and well integrity. Whether you require a permanent solution for long-term isolation or the flexibility of a retrievable plug for short-term interventions, our E-line Bridge Plug Setting Services are designed to meet your needs with precision, reliability, and cost-effectiveness. View Details

Surface Heater

Maintenance Dolly for LM2500 Gas Turbine

The Maintenance Dolly for LM2500 gas turbines is designed to fit the size and weight of LM2500 components, making it easier and safer to handle heavy parts during maintenance.

Key features:

Double wheels for smooth pressure distribution and easier movement
Wheels with directional locking for better control and stability
Non-slip surfaces to enhance worker safety
Foldable steps for convenient access
Storage space for tools and parts on-site
Incorporated lifting brackets for safe and easy lifting
Compatible with forklifts for flexible handling
Corrosion-resistant coating for durability in tough environments

This dolly supports safer and more efficient maintenance of LM2500 turbines by improving mobility, stability, and accessibility.

View Details

2-3/8 inch Halliburton WellStar TR-SCSSSV

The WellStar® tubing-retrievable safety valve (TRSV) is a general production, hydraulically operated, downhole TRSV. The rugged hydraulic actuator of the WellStar safety valve provides durability and isolates the internal workings from well fluids through its unique construction. The metal-to-metal (MTM) sealing integrity in the body joints and closure mechanism places it in a premium valve category while featuring an economical price. Proven through years of installations, the simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions Features » Simple, compact design » Complete MTM well containment in the closed position (body/seat connections and flapper) » MTM flapper sealing (no resilient seal required) » Unique hydraulic actuation (single-piece piston/ flow tube) » Hydraulic chamber construction isolates the majority of the internal valve components and exposes them to clean hydraulic fluid » Positive debris barrier at both ends of flow tube in full open position » Maximized piston area and spring force » Flow tube construction prevents well solids and debris from settling on top of the piston *information referenced from supplier catalog. View Details

Knuckle Joint for Wireline Toolstring

Enhancing Wireline Flexibility with HOCA Oil Tools B.V.'s Advanced Knuckle Joints In the demanding environments of oil and gas extraction, the adaptability and precision of downhole tools are paramount. At HOCA Oil Tools B.V., we specialize in providing state-of-the-art wireline solutions, including our wide range of Knuckle Joints, known for their exceptional flexibility and reliability. Our Knuckle Joints are designed to provide pivotal flexibility in the Wireline Tool String, facilitating angular movement between the tool string and the running or pulling tool, an essential feature for navigating complex downhole geometries. Six Key Benefits of HOCA's Wireline Knuckle Joints: Enhanced Flexibility: Our Knuckle Joints allow for angular movement, enabling the Wireline Tool String to navigate through deviated wellbores efficiently. Improved Tool Placement: By enabling better maneuverability, our Knuckle Joints facilitate precise tool placement, improving the success rates of downhole operations. Increased Operational Range: The added flexibility extends the operational range of wireline tools, allowing for more complex and challenging interventions. Robust Design: Constructed with high-quality materials, our Knuckle Joints withstand harsh downhole environments, ensuring longevity and reliability. Versatile Application: Suitable for a variety of downhole activities, our Knuckle Joints are essential for both standard operations and complex well interventions. Easy Integration: Available with both Threaded and QLS Connections, our Knuckle Joints seamlessly integrate into existing tool strings, enhancing operational efficiency. HOCA's Diverse Array of Wireline Knuckle Joints: Type ‘AO’ Knuckle Joints (Threaded Connection): These are available in sizes from 3/8” to 2 1/2”, designed for easy integration with various tool strings. They offer exceptional flexibility and strength, with sizes accommodating different operational needs, ensuring that tools can navigate wellbore paths effectively. Type ‘AD’ Knuckle Joints (QLS Connection): Catering to advanced operational requirements, these Knuckle Joints provide the same high-level flexibility with quick lock-and-seal connections for faster deployment and retrieval, available in sizes ranging from 1 1/2” to 2 1/2”. Rebco Type ‘AS’ Knuckle Joint (RQLS Connection): An addition to our lineup, offering enhanced swivel action and compatibility with a range of wireline tools, facilitating seamless downhole operations. Each of our Knuckle Joints is engineered with precision, incorporating features such as double fishing necks for increased adaptability and operational safety. The diverse sizes and connection types we offer ensure that there is a HOCA Knuckle Joint suitable for every downhole challenge. By choosing HOCA Oil Tools B.V. for your wireline operational needs, you are selecting a partner dedicated to innovation, quality, and customer service. Our Knuckle Joints represent just one aspect of our commitment to providing the oil and gas industry with tools that meet the highest standards of performance, reliability, and safety. Embrace the flexibility and efficiency of HOCA’s Wireline Knuckle Joints to enhance your downhole operations. Contact us today to learn more about how our tools can transform your well interventions and streamline your operational workflows View Details

MIG Gun M250 Series

Introducing the Revolutionary MIG Gun M250 Series: Your Ultimate Welding Companion When it comes to heavy-duty, durable, and high-performance MIG guns, look no further than the Canaweld M250 Series. Crafted with precision and innovation, this newly designed MIG gun sets a new standard in the welding industry. Engineered to meet the demands of the oil and gas industry, the M250 Series will transform the way you weld, offering unmatched versatility, comfort, and efficiency. Built for Excellence - Unleash the Power of Adaptability The M250 MIG gun boasts a unique and cutting-edge feature that sets it apart from the rest - the ability to convert termination styles seamlessly. With a simple replacement, you can switch between Euro style, Lincoln® style, Tweco® style, or Miller® style, ensuring compatibility with various welding machines. This adaptability makes the M250 Series a true game-changer for welders, offering unmatched flexibility in their welding projects. Unrivaled Features - Mastering Welding Precision Let's dive into the exceptional features of the Canaweld M250 Series: 1. Knuckle Joint: Experience improved balance and position-ability as the handle and neck move independently of the cable assembly. Weld with greater precision and control. 2. Durable Cable: The M250 MIG gun boasts excellent heat, abrasion resistance, and flexibility in its cable. It's lighter than standard cable sets and can withstand over 1 million flexes in life testing, ensuring it stands the test of time. 3. Premium Contact Tips: Crafted from premium grade copper alloys, the contact tips are extremely durable, offering superior performance and efficiency. 4. High-Quality Accessories: Choose from a range of durable and high-performance options for tip adaptors, diffusers, and swan necks, tailoring your MIG gun to suit your specific needs. 5. Ergonomic Handle Design: Enjoy comfortable handling with the ergonomic design of the handle, reducing welder fatigue and promoting longer welding sessions. 6. Air Gap Technology: The M250 MIG gun utilizes air gap technology for cooler running handles and better heat transfer isolator from the swan neck, ensuring efficient and effective welding. 7. Versatile Liner: The steel and combo liner cater to all types of wires, including steel (metalcore and flux-cored), stainless steel (metalcore and flux-cored), and aluminum, making it suitable for a wide range of welding applications. 8. Effective Sealing: The unique sealing ring ensures effective sealing of impurities, particularly in the argon gas process, promoting cleaner welds. 9. Push-on Nozzle System: Easily adjust nozzle stick-out with the push-on nozzle system, streamlining your welding workflow. 10. High-Quality Trigger: The M250 MIG gun comes with a high-quality trigger that boasts a life expectancy of over 1 million cycles, offering durability and reliability in every weld. Elevate Your Welding Experience with Canaweld M250 Series At Canaweld, we strive to empower welders with the latest advancements in welding technology. The M250 Series is a testament to our commitment to excellence, providing welders with a powerful, versatile, and comfortable welding solution. Experience the future of welding with the Canaweld M250 Series - Your Ultimate Welding Companion! View Details

6 5/8" HP-5 Hydraulic Set Production Packer 20-24 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

MS-152 Multistage Steam Turbine

Introducing the Kessels MS-152 Multistage Steam Turbine: Unleash Unprecedented Power and Efficiency In the fast-paced world of the oil and gas industry, where precision, performance, and reliability are paramount, Kessels Steam Turbines proudly presents the MS-152 Multistage Steam Turbine. This engineering marvel is poised to redefine excellence in steam turbine technology, delivering unmatched power and efficiency. Mastering Back-Pressure Turbines Back pressure turbines are the backbone of industrial steam applications, and the MS-152 takes them to an entirely new level. Available in both single-stage and multi-stage options, these turbines serve as the critical link between boiler units and process steam headers, revolutionizing steam utilization and electricity generation. Efficiency Beyond Imagination At the heart of the MS-152 Multistage Steam Turbine is the essence of back pressure turbines – the straight-back pressure design. This innovative engineering ensures the seamless harnessing of exhaust steam, aligning precisely with process demands. Every unit of electrical power generated is consumed as per the process steam demand, marking a new pinnacle of efficiency. Applications Without Limits Our MS-152 turbine is not just a machine; it's a versatile powerhouse ready to excel in diverse applications: Drive Applications: Whether in the oil and gas sector, sugar mills, sugar fibrizor systems, shredder drives, pump drives, or beyond, our turbine delivers power where it's needed most. Power Generation Applications: Embrace sustainability by using our turbine to generate electricity, powering generators with clean and efficient steam energy while reducing your carbon footprint. Bleed Back-Pressure Steam Turbines Kessels understands that adaptability is key. Our MS-152 turbine features built-in bleed points, enabling uncontrolled extraction of steam within a medium pressure range. This feature proves invaluable when low-volume steam demands and high tolerance for pressure variations are critical. Kessels turbines seamlessly combine the best of both bleed and back-pressure mechanisms. Extraction Back-Pressure Steam Turbines For industries with substantial process steam demand volumes and zero tolerance for pressure variations, our steam turbines with controlled extraction vents shine. Operating efficiently under intermediate pressure levels, these turbines ensure a consistent and reliable steam supply on which your operations can depend. Why Choose Kessels? Choosing Kessels Steam Turbines is more than a business decision; it's a commitment to a legacy of excellence, innovation, and reliability. Our MS-152 Multistage Steam Turbine is the embodiment of these principles, offering you: Unmatched Efficiency: Maximize steam utilization while minimizing waste, resulting in substantial cost savings and increased productivity. Reliability Redefined: Built with precision and rigorously tested to ensure uninterrupted operations, even in the harshest industrial environments. Unparalleled Versatility: Adapt effortlessly to changing needs, whether for drive applications or eco-friendly power generation, with the confidence that Kessels has you covered. A Sustainable Tomorrow: Harness the power of steam for electricity generation, reduce your environmental impact, and contribute to a greener future. Expert Support: Our team of specialists is at your service, ready to assist with installation, maintenance, and troubleshooting. Empower Your Future with Kessels In the fiercely competitive world of the oil and gas industry, every advantage counts. Step into a future of efficiency, reliability, and sustainability with the Kessels MS-152 Multistage Steam Turbine. Contact us today to discover how our turbine can revolutionize your operations and lead you toward unprecedented success. Kessels Steam Turbines – Powering Progress, Powering You. View Details

CSA 60 unit, non-Locking, FAST charger rack

Boost Your Equipment’s Readiness with the CSA 60 Unit Non-Locking FAST Charger Rack from Provix Provix is proud to introduce the CSA 60 Unit Non-Locking FAST Charger Rack (model NWI-NWCR-60BC-SSI), a high-capacity, single-sided charging solution designed for the fast-paced needs of modern mining and industrial operations. This charger rack is engineered to keep your Wisdom lighting equipment fully charged and ready for any task. Rapid Charging for Maximum Efficiency The CSA charger rack is optimized for the WISE LITE2, LAMP3A, and 4A models, offering an impressive charging time of just 4 hours for WISE LITE2 and 5 hours for LAMP3A/4A. This quick turnaround is essential for minimizing downtime and ensuring your team's equipment is always operational. High-Capacity Charging Solution With the ability to charge up to 60 units simultaneously, this charger rack is perfect for large-scale operations. Its single-sided design is space-efficient, making it an ideal fit for equipment rooms, charging stations, or any workspace where space is at a premium. Designed for Convenience and Accessibility The non-locking feature of the CSA 60 Unit Charger Rack provides easy and quick access to all charging ports, facilitating efficient management of multiple devices. This accessibility is particularly beneficial in fast-paced work environments where time is critical. Durable and Reliable Construction Built to withstand the demanding conditions of mining and industrial environments, the CSA charger rack is both durable and reliable. Its sturdy construction ensures long-lasting performance, making it a valuable investment for any operation. Ideal for Large Teams and Rental Fleets This charging solution is perfect for mining companies, construction firms, and rental equipment providers who need to charge a large number of devices efficiently and reliably. Its high capacity and fast charging capabilities make it an indispensable tool for large teams. Elevate Your Charging Capabilities Today The Wisdom CSA 60 Unit Non-Locking FAST Charger Rack is available now at Provix. Visit our website at www.provix.net to discover more about this efficient and practical charging solution. Keep your equipment charged and ready for action with Provix's advanced mining equipment solutions. View Details

Welding Cable Double Insulated AWG 4

Introducing Canaweld's Double Insulated Welding Cable - The Ultimate Powerhouse for Your Welding Needs! When it comes to welding, having the right equipment is crucial for achieving superior results and ensuring safety. At Canaweld, we take pride in crafting high-quality welding accessories designed to meet the rigorous demands of the oil and gas industry. Our Welding Cable Double Insulated AWG 4 (21.2 mm2) is a game-changer that will elevate your welding experience to new heights. Uncompromising Quality: Our welding cables are meticulously engineered to deliver unmatched performance and reliability. Crafted from 100% pure copper, these premium welding cables boast a Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172. This construction ensures optimal conductivity, allowing for seamless power transfer during your welding operations. Safety First: At Canaweld, we prioritize safety above all else. That's why our welding cables are double insulated, offering enhanced protection and peace of mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, you can trust our cables to handle the toughest welding tasks with ease. Built to Withstand the Toughest Conditions: We understand that welding environments can be harsh and demanding. That's why our welding cables are engineered to be highly resistant to cuts, tears, and abrasions. They are designed to withstand exposure to oil, solvents, and chemicals, ensuring their durability and longevity even in the most challenging workspaces. Unmatched Flexibility: Work with ease and efficiency using our flexible welding cables. With a minimum bending radius of 4 times the cable diameter, our cables offer excellent maneuverability, allowing you to navigate through tight spaces and challenging welding positions effortlessly. Compliant with Environmental Standards: At Canaweld, we are committed to environmental responsibility. Our welding cables are RoHS compliant, ensuring they adhere to strict environmental standards and are free from harmful substances. Elevate Your Welding Performance: Upgrade your welding setup with Canaweld's Double Insulated Welding Cable AWG 4 (21.2 mm2) and experience the pinnacle of welding excellence. Trust in Canaweld's expertise to deliver top-of-the-line welding accessories that enhance safety, productivity, and performance. With Canaweld by your side, you can confidently take on any welding project in the oil and gas industry. Invest in the best for your welding endeavors - choose Canaweld. View Details

Fuel Nozzle for LM2500 Gas Turbine

The 2-cup Fuel Nozzle is a precision-engineered component used in gas turbines, specifically in the oil and gas industry. Its primary function is to inject liquid fuel into the combustion chamber in a fine, atomized spray, allowing for optimal mixing with air and efficient ignition. This ensures stable combustion, better fuel efficiency, and reduced emissions—key performance factors in industrial turbine applications.

The “2-cup” design refers to the nozzle’s dual flow passages, which help balance fuel distribution across the combustion zone. This promotes more uniform flame stability and lowers the risk of hot spots that can cause thermal stress to the turbine hardware. The nozzle is typically used on “base” engines and is suited for continuous-duty operations.

The L47197P05 variant is known for its compatibility with LM2500 turbine configurations and is built to endure harsh operating environments. It features durable materials and a design that withstands high temperatures and pressures commonly found in oil and gas turbine systems.

View Details

9 5/8" Hydraulic Set Large Bore Retrievable Production Packer

HPL-1 Hydraulic Set Retrievable Production Packer – Large Bore Design for 9 5/8” Casing

The HPL-1 Hydraulic Set Retrievable Production Packer is a large-bore, hydrostatic-set, double-grip packer engineered for 9 5/8” casing, providing enhanced flow capacity and efficient wellbore isolation for production, injection, and zonal isolation applications. Designed to maximize flow efficiency while maintaining well integrity, this packer is set hydraulically by applying tubing pressure, eliminating the need for mechanical tubing manipulation. The expanded internal diameter minimizes flow restrictions, making it an ideal solution for high-rate production and injection wells. Once set, the multiple packing element systemensures a mechanically locked, long-lasting seal, maintaining pack-off force throughout its operational life.

To prevent movement under differential pressure, the hydraulic hold-down pistons engage after setting, while the body lock ring secures the setting force, ensuring bottom-hole pressure variations or tubing contraction do not affect the seal. The large bore design allows for unrestricted flow paths, improving overall reservoir performance and artificial lift system efficiency. This makes it particularly valuable in ESP, gas lift, and other high-flow applications, where maintaining maximum production rates is critical.

For retrieval, operators can use a straight upward pull or an optional right-hand rotational release for controlled removal, reducing the risk of stuck tools and minimizing intervention time. With its high-capacity flow path, secure hydraulic setting, and efficient retrievability, the HPL-1 packer for 9 5/8” casing is an optimal solution for operators looking to enhance well performance, reduce pressure losses, and maintain long-term well integrity.

View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Special Function Pulling Tools

Monoflange SBB Double Block & Bleed Valve – Flange x Thread – Ball Isolation with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Monoflange Single Body Double Block and Bleed Valve combines two isolation points and a vent in a single compact body, providing safe and reliable isolation in oil and gas and process systems. It features a ball isolation mechanism for leak-proof shut-off and a needle drain to safely vent the cavity between the isolation points. This design is particularly suitable for instrument or gauge isolation, chemical injection, sampling, and piping interface applications, where compact size and reduced leak paths are critical.

It's monoflange construction reduces weight, footprint, and the number of potential leak points compared to traditional multi-valve assemblies. The valve accommodates sizes from 1/2” to 2” and pressure classes from 150 to 2500, with both reduced and full bore options to suit different process requirements.

Manufactured from high-quality materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can be supplied with NACE-compliant materials for corrosive environments. All units are designed, tested, and certified in accordance with EEMUA 182, API 6D, ISO 17292, and ASME B16.34 standards and are factory tested to ensure reliable dual isolation and controlled cavity venting.

View Details

Blind Box for Wireline

Unlocking Efficiency with HOCA Oil Tools B.V.'s Advanced Slickline Blind Boxes In the complex world of oilfield services, particularly within the realm of slickline operations, the versatility and precision of downhole tools are of paramount importance. At HOCA Oil Tools B.V., we take pride in our comprehensive range of slickline blind boxes, designed to enhance operational efficiency and safety in the oil and gas industry. Our Type ‘A’ Blind Box series demonstrates our commitment to innovation and quality, catering to a wide range of operational needs. Main Features of HOCA's Slickline Blind Boxes: Diverse Size Range: Available in nominal sizes from .375 inches to 6.687 inches, catering to a broad spectrum of wellbore sizes and wireline operations. High-Quality Materials: Manufactured using robust materials, our blind boxes are designed to withstand the rigors of downhole environments, ensuring reliable performance. Precision Engineering: The precision in crafting each blind box, from threading to length specifications, ensures optimal performance and compatibility with existing slickline tool strings. Customization: Besides standard sizes, we offer custom orders to meet unique operational needs, ensuring that all aspects of the blind box, from thread type to length, are tailored to client specifications. Operational Efficiency: Designed for easy integration and use, our blind boxes help streamline slickline operations, reducing downtime and enhancing overall efficiency. Technical Support: HOCA Oil Tools B.V. provides comprehensive technical support, ensuring that our clients have the guidance needed to select and utilize the most appropriate blind boxes for their operations. At HOCA Oil Tools B.V., we understand the critical nature of slickline operations in the oil and gas industry. Our slickline blind boxes are a testament to our commitment to quality, innovation, and customer service. Choose HOCA for your downhole tool needs and experience the difference that professional-grade tools, backed by industry-leading support and expertise, can make in your operations View Details

24 inch Well Servicing Pipe Wrenches for torquing tubulars and downhole tools

The adjustable pipe, or Stillson, wrench is used to hold or turn pipes or circular bars. This wrench has serrated jaws, one of which is pivoted on the handle to create a strong gripping action on the work. When torquing with a pipe wrench remember the tool push phrase - 24 tight and 48 loose! View Details

9 5/8" Mech-1 Single Grip Mechanical Set Packer for 29.3-36 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

5 1/2” SCSSSVs for High-Pressure Well Control

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 5 1/2" Surface-Controlled Subsurface Safety Valve (SCSSSV) serves a critical safety function by enabling rapid well shut-in if uncontrolled flow occurs due to equipment malfunction or damage. Positioned in the upper section of the wellbore, this valve acts as a barrier to isolate the production pathway, helping to prevent uncontrolled release of fluids and protect personnel, equipment, and the environment.

Its fail-safe design means that any loss of control pressure or system failure causes the valve to close automatically, ensuring well integrity even in emergency situations. The valve uses a wireline-retrievable flapper mechanism that is surface-controlled, allowing operators to maintain or replace key components without pulling the tubing string—significantly reducing downtime and operational costs.

Engineered for wells utilizing 5 1/2" (139.70 mm) tubing, this valve fits landing nipples with a 4.562” seal bore and supports working pressures up to 5,000 psi. The internal valve diameter of 2.38” is designed to balance flow efficiency and tool passage capability. Additionally, by positioning the sealing surfaces outside the flow path when open, the valve minimizes wear caused by erosive fluids, enhancing durability and service life.

This SCSSSV provides a reliable, maintainable solution for well control in demanding operational environments, combining robust construction with practical features to support continuous production and rapid emergency response.

View Details

Drive Down Bailer

The Drive Down Bailer is used to collect samples or remove debris from the wellbore. The Bailer is jarred into the sample or debris forcing material into the cylinder, which is retained by a ball or flapper type non-return seat. The bailer is then jarred upwards and retrieved. Applications • Recovery of in-fill samples from wellbore or sump • Removal of compacted debris or sand from flow control devices View Details

HT-2 Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool.\r\n\r\nT Tubing Hanger\r\nThe T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling.\r\n\r\nT-CL Tubing Hanger\r\nThe T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style.\r\n\r\nC-SRL-CL Tubing Hanger\r\nThe C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools.\r\n\r\nCXS Tubing Hanger\r\nThe CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

DeltaV Backbone Infrastructure

PRV repalcement Turbine

Unlock Energy Efficiency with Kessels API-611 Steam Turbine: The Ultimate PRV Replacement Solution In the dynamic world of industrial applications, energy efficiency is the cornerstone of sustainable operations. Kessels Steam Turbines is proud to offer a groundbreaking solution that replaces traditional Pressure Reducing Valves (PRV) with our robust, reliable, and highly efficient API-611 Steam Turbines. Revolutionizing Energy Efficiency Kessels Single Stage Steam Turbines are tailor-made to handle Saturated Steam at low inlet pressures, harnessing the pressure drop of steam to generate power through the turbine via geared or gearless Turbo Generator set solutions. Choice in Generators for Your Unique Needs Our Turbo Generator sets can be configured with either Induction Generators or Synchronous Generators, catering to the specific requirements of our customers. Energy Recovery at Its Best Kessels Industrial PRV replacement solutions are designed to recover wasted energy by reducing steam pressure through our steam turbines, surpassing the limitations of traditional PRVs. This not only generates valuable power for industrial use but also caters to the process steam requirement of the industry. The result? Drastically reduced operational costs and reduced reliance on the grid and other more expensive power sources. Balancing Act: PRV and Power Generation Kessels Single Stage Steam Turbines are ingeniously designed to enable customers to enjoy the full benefits of a PRV system while simultaneously generating useful power. This equilibrium is achieved without compromising the stability or safety of the system or their setup. Maximizing Power Output For optimum performance, Kessels offers the option of Multiple Valve Operated Steam Turbines. These turbines ensure customers get maximum power output, even at partial loads and varying steam flows. Our valves, available in the Single Stage Steam Turbine range, can be controlled automatically through the special PLC-based governing system provided by Kessels for turbines coupled to Induction Generators. Versatile Powerhouses Kessels API-611 Steam Turbines are versatile, highly efficient, rugged, and robust. They boast single disc one-row and two-row Curtis impulse-type wheels, making them suitable for a wide range of industrial applications. Additionally, these turbines can be retrofitted to any existing boiler setup, making them a versatile choice for various installations. Key Features: Versatile and highly efficient. Single disc one-row and two-row Curtis impulse-type wheels. Retrofittable to existing boilers. Operates efficiently with high exhaust steam pressures. PLC-based control panel with HMI screen for ease of use (optional). Compatible with both Induction and Synchronous Generators. Operates in solo mode or synchronized mode. Can be synchronized with the grid and/or other power sources. Reduces operational costs with a short payback period. Quick startup times and option for complete automatic operation. Choose Kessels for a Sustainable Future Elevate your industrial operations with the Kessels API-611 Steam Turbine, the ultimate PRV replacement solution that combines energy efficiency, reliability, and versatility. Contact us today to discover how our turbine can revolutionize your energy management and lead you toward unprecedented success. View Details

Tube Fittings 45 Degrees Elbow NPT Thread – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 7/8”, 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The 45° Elbow NPT Thread Tube Fitting is a specialized connector used to change the direction of flow in piping systems by 45 degrees. Manufactured to precise standards, it provides a strong, leak-resistant connection between tubes with NPT threads, ensuring consistent system performance. The fitting is suitable for use in oil, gas, and industrial process systems, where controlling flow direction and minimizing stress on tubing is critical.

Its design allows compact and efficient piping layouts, reducing the need for multiple fittings while maintaining smooth fluid flow. The fitting is machined to ensure tight tolerances, providing reliable sealing even under vibration, thermal expansion, or pressure fluctuations. Case-hardened threads improve durability, while the material selection ensures compatibility with common industrial fluids and gases.

Unique to this fitting is its ability to create a precise 45° angle connection without compromising the integrity of the tubing system, making it ideal for applications where space is limited or exact routing is required. Installation is straightforward: the tube is inserted into the fitting, and the NPT threads create a secure mechanical seal that resists leakage over extended operational periods.

View Details