Ballycatter.ca - Industrial Equipment

4” Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 4-inch Surface-Controlled Subsurface Safety Valve (SCSSV) is designed for installation in wells with 4-inch production tubing and serves as a critical safety device to shut in the well during uncontrolled flow events caused by equipment failure or loss of surface hydraulic control pressure. The valve operates via a hydraulically actuated flapper mechanism that remains open under normal operating pressure but closes automatically if the hydraulic signal is lost. This fail-safe design isolates the wellbore, preventing unintended release of hydrocarbons and protecting both personnel and the environment.

The flapper mechanism is simple and robust, minimizing moving parts in the flow path and reducing potential points of failure. When open, the sealing surfaces are positioned out of the fluid flow path, which helps maintain smooth production flow and reduces wear on sealing components. The valve’s hydraulic actuation allows reliable operation under varying pressure and flow conditions commonly encountered in oil and gas wells.

The valve is wireline retrievable, which means it can be removed, serviced, or replaced using wireline tools without the need to pull the entire tubing string from the well. This capability significantly reduces well intervention time and associated costs while allowing maintenance or upgrades to be performed efficiently.

This SCSSV fits standard landing nipples with a seal bore of 3.313 inches and is rated for working pressures up to 5,000 psi. Its internal valve diameter is 1.75 inches, providing an appropriate balance between flow capacity and structural integrity for wells with moderate to high flow rates. The 4-inch tubing size is common in many oil and gas production wells, making this valve size versatile across different field conditions.

This size is commonly applied in production wells where 4-inch tubing is standard, supporting reliable well control and efficient maintenance. Its hydraulic surface control and simple flapper design contribute to dependable operation under varying well conditions.

View Details

Shear Up Pulling Tools for External Fishing Necks

Elevate Downhole Operations with HOCA Oil Tools' Shear Up External Fishing Neck Pulling Tools In the demanding environment of oil and gas extraction, operational efficiency and equipment reliability are paramount. At HOCA Oil Tools, we understand these challenges and are dedicated to providing solutions that enhance downhole operations. Our Shear Up External Fishing Neck Pulling Tools are designed to revolutionize the retrieval of downhole equipment, ensuring a seamless operation and enhancing well productivity. HOCA's Shear Up External Fishing Neck Pulling Tools: Engineered for Superior Performance Our Shear Up External Fishing Neck Pulling Tools are specifically engineered for the safe and efficient retrieval of downhole equipment featuring external fishing necks. These tools are indispensable for operators seeking to enhance operational efficiency and safety. Crafted with precision and built from high-grade materials, our Shear Up Pulling Tools are designed to withstand the harsh conditions of the downhole environment, ensuring reliability and durability in every operation. Experience the HOCA Oil Tools Difference At HOCA Oil Tools, we are committed to excellence and innovation in every product we offer. Our Shear Up External Fishing Neck Pulling Tools epitomize this commitment, providing operators with a reliable solution for the retrieval of downhole equipment. By integrating our tools into your downhole operations, you gain not just a product but a partner dedicated to enhancing your operational success. With HOCA Oil Tools, you can expect products that not only meet industry standards but exceed them, ensuring your operations run smoothly, safely, and efficiently. Our Shear Up Pulling Tools are a testament to our dedication to quality, performance, and customer satisfaction. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied customers who rely on our Shear Up External Fishing Neck Pulling Tools to elevate their downhole operations. Partner with us, and unlock the full potential of your downhole activities with tools designed for success. With HOCA Oil Tools, elevate your operational capabilities and embrace a future of enhanced efficiency, safety, and cost-effectiveness in downhole operations. View Details

Subsea Templates Fabricated and Installed

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

SP TR Surface Controlled Subsurface Safety Valve 6-5/8 inch

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

High-Performance 7" Surface-Controlled Subsurface Safety Valve

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'” and 7”.

The 7-inch Subsurface Controlled Surface Safety Valve (SCSSSV) is a critical safety device designed to automatically shut in a well if uncontrolled flow occurs due to equipment failure or damage. It is installed in the upper part of the well to quickly isolate the producing zone and prevent uncontrolled release of fluids, ensuring well control in emergency situations.

This valve uses a flapper mechanism and is surface-controlled, meaning it can be operated from the surface. It features a self-equalizing design that reduces pressure differences across the valve during opening and closing, which improves reliability and extends valve life. The sealing surfaces are located outside the flow path when the valve is open, reducing wear and protecting key components from erosion.

Because the valve is wireline retrievable, it can be serviced or repaired without pulling the entire tubing string, minimizing downtime and intervention costs. It fits 7-inch tubing and is available with landing nipple seal bores of 5.750", 5.875", or 5.963". It can handle working pressures up to 10,000 psi and offers valve internal diameters of 3.38" and 3.50", allowing operators to balance safety and flow requirements effectively.

View Details

Lamp KL5MS MSHA

Introducing the Wisdom KL5MS MSHA Corded Miner's Cap Lamp – A New Standard in Mining Safety and Efficiency, Exclusively from Provix Provix is excited to unveil the latest addition to its range of high-quality mining equipment – the Wisdom KL5MS MSHA Corded Miner's Cap Lamp. This innovative product is not just a lighting solution; it's a commitment to safety, efficiency, and reliability in the demanding world of mining. Exceptional Lighting for Enhanced Safety Equipped with a powerful 7,800mAh battery, the KL5MS MSHA guarantees 13 hours of continuous lighting, ensuring that miners are never left in the dark. The main light LED, with a working voltage of 3.0V and current of 640mA, delivers a luminous flux of 340 lm. The impressive lighting degree of 18,000 lx at 1 meter enhances visibility significantly, making it a vital tool for miners. MSHA & ATEX M1 Certified for Maximum Safety The KL5MS MSHA goes above and beyond when it comes to safety. It is both MSHA (Mine Safety and Health Administration) and ATEX M1 certified, meeting the highest safety standards in the mining industry. This certification underscores our commitment to providing equipment that ensures the utmost safety of miners in potentially hazardous environments. Built to Last in Harsh Conditions Durability is a key feature of the KL5MS MSHA. The lamp has a main light lifespan of 50,000 hours and an auxiliary light lifespan of 40,000 hours. Its IP68 water-proof rating and explosion-proof design make it ideal for use in various mining conditions. Additionally, the battery life spans 1,200 cycles, ensuring long-term reliability. Ergonomically Designed for Comfort and Ease of Use Weighing just 550g (19.40 oz) and with a main cable length of 1.4 to 1.65 meters (4.59 to 5.41 feet), the KL5MS MSHA is designed for comfort. Its compact dimensions (94 x 36 x 90 mm; 3.7 x 1.4 x 3.5 in) ensure it is not cumbersome, allowing for mobility and ease during long shifts. Efficient and Convenient Charging The KL5MS MSHA is as practical as it is powerful. It features a convenient USB charging system, enabling quick and easy recharging. The charging time of 4 to 7.5 hours ensures the lamp is ready for use with minimal downtime. Get Yours Today The Wisdom KL5MS MSHA Corded Miner's Cap Lamp is available now at Provix. Visit our website at www.provix.net, call us, or email for more information. Elevate your mining operations with the Wisdom KL5MS MSHA – where safety and efficiency meet. View Details

SSV 4.51 inch for Water Injection Wells

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

DCS infrastructure Technical Support

Navigating Through Technological Challenges: Nulux Offers Unparalleled DCS Infrastructure Technical Support In the fastidious realm of the oil and gas industry, a well-oiled Distributed Control System (DCS) isn’t just an ancillary asset; it’s the digital backbone supporting the streamlined operations, analytical assessments, and safety protocols so critical in such a challenging environment. With Nulux Network Solutions at your helm, not only is your DCS infrastructure skillfully designed and implemented, but its continual functionality is upheld through our impeccable technical support. Nulux: A Beacon of Robust Networking in the Industrial Sector With a prestigious track record of over two decades, Nulux Network Solutions spearheads the industry in telecommunication and networking solutions. We’ve diligently crafted, upgraded, and meticulously maintained a myriad of copper cabling systems, including telephone, ethernet, coax, and hybrid networks, to ensure your industrial projects always remain a step ahead technologically. Our specialization extends beyond mere installation and permeates every aspect of network management, providing you a comprehensive turnkey solution. With our eyes fixed on providing unparalleled service quality, we've carved our niche, particularly in upgrading and maintaining DCS networks, proving time and time again that when it comes to networking, we're a name you can trust. Technical Support that Speaks Volumes We don’t just stop at providing you a stellar DCS infrastructure; our technical support is always at your beck and call, ensuring that your network runs seamlessly, uninterrupted, and continues to facilitate operational excellence. Here’s how our Technical Support stands apart: 24/7 Availability: In an industry that never sleeps, our technical support is available round the clock, ensuring that help is always a call away. Expert Troubleshooting: With a team adept in diagnosing and resolving issues swiftly, any disruptions are promptly addressed, minimizing downtime and keeping your operations in perpetual motion. Life Cycle Management: From planning and implementation to upgrades and maintenance, our support encompasses every phase, ensuring your DCS infrastructure continually evolves and aligns with technological advancements. Tailored Solutions: Understanding that no two networks are identical, our solutions are customized, catering to the specificities of your DCS infrastructure, providing targeted, effective, and efficient support. Why Our Copper Network Reigns Supreme Our copper network doesn’t just promise high-bandwidth transmission and long-term reliability; it assures your DCS infrastructure is equipped with a network that is inherently: Cost-Effective: Ensuring you don’t have to compromise quality for cost. Flexible and Durable: Capable of withstanding the demanding operational environment and evolving in tandem with your expanding needs. Easily Terminated: Allowing for swift modifications and expansions as per operational demands. Ensuring Your Success is Uninterrupted with Nulux In the multifaceted world of the oil and gas industry, ensuring that your business is equipped with an unshakeable DCS infrastructure, backed by an unwavering support system, isn’t just beneficial; it’s quintessential. With Nulux Network Solutions, you’re not merely adopting a network; you’re embracing a partnership where your success becomes a shared objective. Engage with Nulux and explore how our unparalleled DCS infrastructure technical support can ensure that your operations never falter, your network never falters, and your success story continues unabated. Contact us today for a consultation that will pave the way toward a technologically fortified future. View Details

PMIT

Unveiling Subsurface Precision: InWaTec Combined's PMIT Services for Optimal Wellbore Assessment In the ever-evolving landscape of the oil and gas industry, the quest for precision in subsurface analysis is relentless. InWaTec Combined's Platform Multifinger Imaging Tool (PMIT) Services stand at the forefront of this quest, offering unparalleled accuracy in the radial measurement of tubing and casing strings' internal diameters. The PMIT is an innovation par excellence, a multifinger caliper tool that delves into the heart of the wellbore to capture highly precise data. This tool is not just a measuring device; it is the embodiment of accuracy and technological sophistication. With its multiple sensor fingers, the PMIT glides along the tubing or casing surface, meticulously logging variations in the internal diameter that could indicate potential issues such as corrosion, wear, or deformation. Our PMIT services are crucial for ensuring the integrity and performance of downhole tubulars. With its ability to provide a 360-degree internal view, the PMIT helps operators make informed decisions about maintenance, workover needs, and overall well management. The accuracy of the PMIT’s measurements allows for the early detection of anomalies that, if left unchecked, could lead to operational failures or safety hazards. At InWaTec Combined, we believe that a thorough understanding of the wellbore condition is essential for the longevity and productivity of wells. Our PMIT Services deliver this understanding through detailed assessments that support proactive intervention strategies. The data gathered by the PMIT facilitates accurate planning for remedial operations, ensuring that any service performed is targeted and effective. In an industry where the margin for error is increasingly narrow, the PMIT offers a significant advantage. Operators can trust the data from our PMIT Services to reflect the true conditions within their wells, providing a solid foundation for all subsequent operational decisions. Choose InWaTec Combined's PMIT Services for your wellbore assessment needs, and experience the confidence that comes from precision technology and detailed, actionable data. Our commitment is to provide you with the insights necessary to maintain the highest standards of well integrity and performance. With InWaTec Combined, you are not just measuring the depths—you are mastering them. View Details

Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Pipe Fittings Gauge Adapters – Female ISO Parallel Thread to Male NPT – 1/4", 3/8", 1/2" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Gauge adapters with a female ISO parallel thread to male NPT are small but essential components used to connect measurement instruments, such as pressure gauges or transmitters, to piping systems in industrial and oil and gas applications.

The female ISO thread screws directly onto the instrument, while the male NPT thread connects securely to the pipe or tube, creating a tight and leak-resistant connection.

These adapters are made from high-quality materials such as stainless steel or brass, which makes them durable and resistant to corrosion, even in harsh environments. They are designed to handle high pressures, up to 10,000 PSI, ensuring that instruments provide accurate readings without risk of failure.

They follow international thread standards including ASME B1.20.1, SAE AS71051, ISO 7-1, and ISO 228, which guarantees compatibility with other equipment and ensures reliable performance in critical systems. This makes them a practical and dependable choice for monitoring and controlling fluids.

View Details

Pull and set Mechanical Plugs

InWaTec Combined: Streamlining Well Integrity with Expert Mechanical Plug Operations In the intricate sphere of well servicing, the ability to effectively isolate sections of the wellbore is crucial. At InWaTec Combined, we specialize in providing top-tier Pulling and Setting Mechanical Plug services that ensure well integrity through precision and reliability, all achieved via mechanical wireline manipulation. Sophisticated Simplicity in Well Isolation Our mechanical plug services are designed to provide a seamless solution for wellbore isolation. The mechanical plugs can be set using the finesse of wireline operations alone, without the need for complex hydraulic systems. This method exemplifies our commitment to sophisticated yet simple solutions, providing our clients with a straightforward and efficient means to secure their wells. Tailored Tools for Diverse Requirements Recognizing that wells come in various sizes and specifications, InWaTec Combined has developed a selection of running tools to match. Depending on the size of the mechanical plug, we employ one of two specialized running tools. Each tool is designed to engage with the plug precisely, ensuring a secure and accurate setting every time. Versatility Across Operations Whether it’s a routine intervention or an emergency response, our Pulling and Setting Mechanical Plug services are versatile enough to adapt to the specific needs of the operation. This versatility is a testament to the depth of our expertise and the breadth of our technological capabilities. Efficiency in Execution The use of mechanical wireline manipulation for setting and pulling plugs not only provides precision but also enhances operational efficiency. By eliminating the need for additional hydraulic equipment, we can execute operations more quickly, reducing downtime and optimizing well productivity. A Commitment to Operational Excellence At InWaTec Combined, our services are underpinned by a steadfast commitment to operational excellence. We don’t just deliver tools and technologies; we provide a partnership that prioritizes the integrity and productivity of your well operations. Our experienced technicians and state-of-the-art equipment stand ready to deliver results that exceed expectations. Conclusion: Ensuring Well Integrity with Precision In conclusion, InWaTec Combined's Pulling and Setting Mechanical Plug services represent the pinnacle of well intervention solutions. Our precision-engineered tools and expert wireline manipulation techniques ensure that well integrity is maintained with the utmost efficiency and reliability. Trust InWaTec Combined to be your partner in well servicing operations, where every plug set is a step towards ensuring the ongoing success and safety of your well activities. View Details

Bigbore 7 inch Wireline Retrievable Surface Controlled Subsurface Safety Valve

The manufacturer has applied the same stringent testing used on its maximum reliability tubing-retrievable safety valves (TRSV) to its BigBore™ wireline-retrievable safety valve (WLRSV). This valve offers the durability and reliability of TRSVs through metal-to-metal (MTM) sealing of the contoured flapper, enhanced body connections, and debris isolation. The contoured flapper provides a large ID compared to other valve designs, while providing enhanced flapper sealing. Another significant feature of this valve is its ease of on-location servicing. The construction of the upper end of the valve provides for easy access to the valve’s external packing. Once the lock is removed, the packing retainer sleeve can be removed and serviced. The savings made possible by an enlarged ID, enhanced performance, and ease of service have made it an excellent choice for replacing equipment currently installed in existing completions. Applications » New completions » Replacement of existing WLRSVs to provide increased ID and reliability Features » MTM sealing contoured flapper closure with large ID » High-strength rod-piston actuation » Dual-sealing minimized body connections » Enhanced debris isolation through MTM interface of flow tube/bottom sub » Radius of curvature at flow entrance » Equalizing feature available » Designed for easy field servicing » Setting depths to 9,000 ft (2743 m) *information referenced from supplier catalog. View Details

Electric Submersible Pump Straight Pull 4.5" Packer

The Ballycatter Model WC-ESP Straight Pull 4.5” Packer is a compact, hydraulic-set production packer optimized for ESP completions in 4.5” casing. It features a pass-through section for ESP power cables, allowing seamless electrical connectivity between the surface and the ESP unit below.

The single-mandrel design with Acner Array Packing Element ensures superior sealing integrity, even in high-pressure and high-temperature wells. Its bi-directional slip system resists pressure from both above and below, providing secure anchoring and preventing unwanted movement.

Setting is achieved hydraulically by applying tubing pressure, locking the packer in place for long-term well isolation. Retrieval is simplified through a straight pull mechanism, eliminating the need for complex downhole tools and ensuring fast, efficient removal in standard and deviated wells. Compatible with all major ESP cable pack-off and feed-thru devices, the WC-ESP Straight Pull 4.5” Packer delivers reliability and ease of operation in compact wellbore conditions.

View Details

Liftboat for water depths up to 150'

Let Sunkers Marine arrange all your marine needs with our network of service providers. View Details

Lock Mandrels for Landing Nipples

Enhancing Downhole Operations with HOCA Oil Tools' Lock Mandrels for Landing Nipples In the intricate landscape of oilfield operations, achieving peak efficiency and maintaining well integrity are of utmost importance. HOCA Oil Tools, a leader in downhole slick line tools, introduces its Lock Mandrels for Landing Nipples, designed to meet these challenges head-on. These Lock Mandrels are crafted for precision, reliability, and durability, ensuring they meet the diverse needs of modern downhole activities. HOCA's Lock Mandrels for Landing Nipples: Tailored for Excellence Our Lock Mandrels are engineered to be set into pre-positioned landing nipples within the wellbore, providing a secure and reliable platform for the deployment of various downhole tools and instruments. Available in multiple types such as 'ROTR', 'ROTRN', 'ROTX', and 'ROTXN', our Lock Mandrels cater to a wide range of downhole conditions and operational requirements. They can be selected based on the specific flow control accessory attached, making them either Selective or No-Go types to suit different operational strategies. Experience the HOCA Oil Tools Difference By integrating HOCA Oil Tools’ Lock Mandrels into your downhole toolkit, you're choosing a product backed by our commitment to quality, innovation, and customer service. These mandrels are not just tools but solutions designed to enhance the efficiency and safety of your downhole operations. Our Lock Mandrels for Landing Nipples represent the intersection of innovation and practicality, providing the reliability and performance essential for today's oilfield challenges. Choose HOCA Oil Tools for your downhole needs and experience the difference that quality and expertise can make in your operations. Embrace the future of downhole operations with HOCA Oil Tools, where technology meets tradition to drive success in the oil and gas industry. View Details

5-1/2 TR-SCSSSV Model SP

The SP™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for hostile environments and extended life applications where ultimate reliability is required. Potential leak paths within the valve are minimized with the single rod-piston design. The piston achieves a metal-to-metal (MTM) seal at its uppermost and lowermost positions to seal well pressure from the control system. The SP valves incorporate flappers using spherical radius sealing surfaces that help greatly improve seal reliability. The spherical radius design provides full MTM sealing integrity. For applications where either the OD or ID is restrained, SP valves incorporate a contoured flapper. OD/ID relationships are improved by the contoured flapper design, which helps provide superior MTM sealing when compared to other forms of curved flapper technology. Applications » For applications requiring ultimate reliability and longevity, such as high-temperature/high-pressure, and subsea completions, or hostile well environments Features » Non-elastomer dynamic piston seals » MTM static seal at upper and lower piston positions » MTM body joints » Flow tube fluted guide » 100% MTM flapper » Concentric thrust bearing » Wiper ring on upper flow tube » Cleanout ports in flow tube’s upper end » Internal exercise profile » Flow tube shock absorber » MTM face seat at flow tube downstop » Setting depths to 9,000 ft (2743 m) » Critical components isolated from well debris with valve in open position » Area above flow tube free of solids buildup » Flow tube can be manipulated by slickline » Protected from high flow rate slam closures *information referenced from supplier catalog. View Details

Slickline Rope Socket

HOCA Oil Tools B.V.'s Expertise in Slickline Rope Sockets In the dynamic world of oil and gas extraction, precision and reliability are paramount. At HOCA Oil Tools B.V., we take pride in our extensive expertise in slickline operations, particularly our specialized rope sockets designed for varied downhole conditions. Our product range includes Type ‘AO’, ‘AD’, ‘AS’, ‘BO’, ‘BD’, ‘BS’, ‘CO’, ‘CD’, ‘CS’,‘CGO’, ‘D’, ‘DD’, ‘DS’, ‘GO’, ‘RC’, ‘SA’, ‘HO’, and ‘HD’ rope sockets, each tailored for specific wireline tasks and environmental conditions. Our rope sockets are crafted from high-quality alloy materials, ensuring durability and optimal performance. They cater to a wide range of wire sizes and types, accommodating single-strand, multi-strand, and encapsulated lines. With features like spring disc supports, releasing slips, and heavy-duty clamps, our rope sockets ensure secure connections and safe operations under intense downhole pressures. The main features of some of the various rope sockets offered by HOCA Oil Tools B.V. are as follows: Type ‘CGO’ Rope Socket: Designed for use with small stranded lines up to 1/4” diameter, this rope socket has an additional swivel bottom, making it similar in design to the Type ‘CO’ but with enhanced functionality for specific applications requiring rotation. Type ‘D’ Dummy Rope Socket: Available with threaded or QLS Connections, this tool can be attached to other types of tools with a pin connection for various wireline applications, offering great versatility and adaptability in operational setups. Type ‘GO’ Rope Socket: Engineered specifically for single conductor cable heads, providing secure and reliable connections for specialized wireline operations. Type ‘RC’ Rope Socket: This assembly is tailored for encapsulated line applications, offering enhanced protection and durability for operations involving encapsulated cables. Type ‘SA’ Rope Socket: Designed for swabbing applications with Babbitt fill, this rope socket is tailored for operations requiring the retrieval of fluids from wells, ensuring efficient and reliable performance. Type ‘HO’ and ‘HD’ Heavy Duty Rope Socket: These are intended for heavy-duty wireline work and feature a unique design that traps the wire, held in place with socket screws, suitable for more demanding operations and environments. Each type of rope socket has unique features tailored to different wireline operations, ensuring that HOCA Oil Tools B.V. can provide a suitable solution for a wide range of downhole conditions and requirements. HOCA Oil Tools B.V. stands at the forefront of slickline technology, offering solutions that ensure safety, efficiency, and reliability. Our commitment to innovation and quality has established us as a trusted partner in the oil and gas industry worldwide. View Details

2 9/16" Coiled Tubing Hanger, Rated 5M

The 2 9/16” 5M Coiled Tubing Hanger is a tool designed to securely hold coiled tubing in place during well operations where pressure can be high—up to 5,000 psi. It is built to support heavy coiled tubing and the equipment attached to it when performing tasks deep inside the well.

This hanger works with coiled tubing sizes of 1 inch, 1¼ inches, 1½ inches, and 1¾ inches in outside diameter, making it suitable for a range of tubing types used in different well operations. It connects to the wellhead using standard flanged connections.

A special feature of this hanger is its wireline entry sub. This part acts as an extra seal around the tubing to maintain pressure control in the well while allowing wireline tools to pass safely through the tubing. The wireline entry also prevents the tubing from moving upwards during operations, which helps protect the equipment and maintain well safety.

The hanger is powered by electricity, which supports reliable operation in the field. Overall, the 2 9/16” 5M Coiled Tubing Hanger helps keep the tubing stable, maintain well pressure, and allow tool access during important tasks like cleaning the well, stimulating production, or running diagnostic tools.

View Details

Subsurface Safety Valve for Injection Wells 5.4 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Check Valve Poppet Type – Male x Female 1/2" NPT – 6000 PSI – ISO 9001

The 1/2" poppet type check valve with male × female NPT connections is designed to allow fluid flow in one direction while preventing backflow in oil and gas systems. Its poppet mechanism provides fast response and a positive seal under pressure, protecting pipelines, pumps, and equipment from reverse flow and pressure fluctuations.

The 1/2" size is suitable for medium diameter lines, instrumentation, sampling, and control applications where reliable uni-directional flow is required. Male × female connections enable secure inline installation and integration into existing piping systems without additional fittings, reducing potential leak points and simplifying system layout.

The valve has a standard working pressure of 6000 psi, with optional configurations up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adaptation to system requirements. Construction materials include corrosion-resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, ensuring durability in demanding oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures quality and material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.

View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 47-53.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Plug with Equalizing Prong and Valve Sub-Assembly

HOCA Oil Tools: Revolutionizing Downhole Operations with Plug with Equalizing Prong and Valve Sub-Assembly In the dynamic and demanding world of downhole operations within the oil and gas industry, the quest for innovation, efficiency, and safety is relentless. HOCA Oil Tools, a leading provider of specialized downhole slick line tools, meets this challenge head-on with our advanced Plug with Equalizing Prong and Valve Sub-Assembly. This tool is meticulously designed to enhance the functionality and safety of downhole operations, providing a solution that is both versatile and reliable. HOCA’s Plug with Equalizing Prong and Valve Sub-Assembly: Tailored for Optimal Performance Our Plug with Equalizing Prong and Valve Sub-Assembly is engineered for precision and durability, designed to address the complex needs of modern downhole activities. This innovative tool combines the functionality of a plug for secure sealing and isolation with the added advantage of an equalizing prong and valve mechanism. This integration allows for controlled pressure equalization, crucial in preventing potential downhole complications and ensuring the safety of the well and personnel. Experience the Difference with HOCA Oil Tools Choosing HOCA Oil Tools’ Plug with Equalizing Prong and Valve Sub-Assembly means opting for a product that stands at the confluence of innovation, quality, and safety. We are committed to providing solutions that not only meet the current demands of the oil and gas industry but also anticipate future challenges, ensuring our clients are equipped for success. Integrating our advanced plug assembly into your downhole operations signifies a move towards enhanced efficiency, safety, and control. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your operational goals with cutting-edge solutions and comprehensive service. Select HOCA Oil Tools for your downhole needs and leverage the advantages of our Plug with Equalizing Prong and Valve Sub-Assembly to optimize your operational outcomes. Partner with us and step into a new era of downhole operations, where efficiency, safety, and performance are paramount. With HOCA Oil Tools, empower your downhole activities with tools that redefine industry standards and drive your success in the competitive oil and gas landscape. View Details

Oclansorb Oil Spill Clean-up Material

Oclansorb is 100% organic and non-toxic material which absorbs oil on contact. This oil absorbent is biodegradable and can be used on land and on water. Oclansorb is made from sphagnum peat moss and will absorb oil and hydrocarbons but not water. It is 15 times more absorbent than clay, translating into one 18 pound bag of Oclansorb being as effective as 450 pounds of clay. This improves the efficiency of clean-up operations as only 1 bag of Oclansorb replaces the shipping and handling of nine 50 pound bags of clay. On land, apply Oclansorb over the area with hydrocarbon contamination and lightly brush the Oclansorb around. The surface can be dry or wet, as Oclansorb does not absorb water. The oil is absorbed on contact, and the captured volumes can be disposed of in landfills or incinerated (as approved by local authorities). On water, cover the oil with Oclansorb as completely as possible. In wavy or flowing conditions, a boom should be used to concentrate the oil. The hydrocarbon will absorb on contact with Oclansorb, and mixing the material to expose more surface area to the hydrocarbons increases absorption. View Details

7 5/8" HP-6 Hydraulic Set High Angle Production Packer for 33.7-39 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Cement Truck for delivery of constuction concrete in high reliability environments

The cement truck has a drum that turns while the truck is moving to keep the concrete agitated and in a liquid state until it’s ready for delivery to the right location. Inside the drum is a multi-purpose blade and reversing the blade then allows the concrete to be lifted out of the drum. View Details

Ultra High Density Power Supply for Subsea

ROV Remote Operated Vehicle for subsea and dive activities

ROV's are underwater machines that can be used to explore ocean depths while being operated remotely by someone at the waters surface by means of an umbilical. Remote operated vehicles provide high quality images and video of subsea infrastructure and can be used to manipulate valves and tools to operate and maintain oil and gas infrastructure. ROV's are used in a wide range of industrial applications and marine research activities without the challenges experienced by human divers. View Details

Tubing Hanger Coupling – 6 5/16” to 2 1/2”

The 6 5/16” to 2 1/2” Tubing Hanger Coupling is a specially made part used in oil and gas wells to connect a large casing opening to smaller tubing—typically 6 5/16 inches—to a smaller 2 1/2-inch upset production tubing. This size combination is often selected for well designs that require a broader casing interface for flow management, safety equipment, or well control hardware, while maintaining a slimmer production string for specific flow requirements or structural considerations.

This coupling is manufactured with upset-end compatibility, meaning it is suited for tubing that has thickened ends designed to strengthen threaded connections. This feature improves mechanical reliability and helps the connection withstand downhole pressure, tensile loads, and thermal cycling. The union nut design allows the coupling to be installed by tightening the nut without rotating the upper wellhead assembly, which is particularly useful in space-constrained or high-integrity environments.

To accommodate a range of operational needs, the coupling can be threaded on both ends to suit different tubing or spool designs and is compatible with back pressure valves—providing added safety during pressure control, intervention, or servicing. Built in accordance with API specifications and from high-strength materials, the coupling is designed to operate reliably in demanding conditions, including high-pressure wells and corrosive environments.

View Details

7" Mech-1 Single Grip Mechanical Set Packer for 32-35 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

4” Tubing End Locator

The 4” Tubing End Locator is designed specifically for use with larger production tubing strings common in wells that require greater flow capacity or enhanced mechanical strength. This size is typically found in wells with higher production rates or more demanding operational requirements, where accurate depth confirmation becomes even more critical.

This model is specifically sized for 4-inch outer diameter tubing, featuring a maximum outside diameter that fits comfortably within the tubing’s internal dimensions. This sizing ensures that the locator can move smoothly without obstruction while maintaining effective contact to detect the tubing end. The core mechanism involves a spring-loaded finger that extends outward upon contacting the tubing bottom. This movement translates into a tactile signal felt at the surface, eliminating the need for complex electronic systems and reducing the risk of failure in harsh downhole environments.

Equipped with standardized threaded connections—commonly a 1-9/16 - 10 UN pin on the top and a 1 - 11 ½ NPT box on the bottom—the tool integrates easily into typical slickline, wireline, or coiled tubing toolstrings. The fully mechanical design enhances reliability, making it well-suited for use in conditions of high pressure, elevated temperatures, and corrosive fluids often found in oil and gas wells.

The 4” Tubing End Locator is especially valuable in wells with larger tubing sizes where accurate depth confirmation is critical to avoid operational errors. By providing a straightforward and dependable method to locate the tubing end, it supports safe and efficient well intervention, helping to reduce downtime and operational risks.

View Details

Double Block & Bleed Valve – Flange x Flange – Ball Isolation with Needle Drain – 1/2” (DN 15) – Class 150 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve with Flange x Flange connections and Ball x Ball isolation with Needle drain is designed to provide reliable dual isolation in oil and gas applications. This valve allows two points of isolation in a single assembly, reducing leak paths and ensuring safe maintenance downstream of the first isolation point. The integrated needle drain safely vents any trapped pressure between the two isolation valves.

This valve is available in flange sizes from 1/2” (DN 15) and can be used in applications requiring Class 150 ratings. Reduced and full bore options are offered to accommodate varying flow requirements. The design is suitable for direct or remote mounting of instruments, chemical injection connections, gauge isolation, instrument drains, and piping/instrument interfaces.

Manufactured in materials such as SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, the valve can also meet NACE MR-0-175 requirements where corrosion resistance is necessary. The assembly conforms to recognized standards including ASME B16.34, API 6D, and ISO 17292. Its compact design allows easier installation in space-constrained environments while minimizing stress from loading or vibration.

This configuration is particularly useful in oil and gas operations where dual isolation is needed for maintenance, sampling, or chemical injection, providing a safe and efficient solution in instrument and piping systems.

View Details

7" Mech-1 Single Grip Mechanical Set Packer for 38 PPF Casing

Ballycatter Mech-1 Single Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-1 is a retrievable, compression-set mechanical packer designed for low-pressure production, casing integrity testing, and well intervention operations. Built with a long-stroke mandrel and a large bypass area, it allows unrestricted fluid circulation while running in hole. The bypass is controlled by a face-seal valve that automatically closes during setting, fully isolating the annulus once the packer is engaged.

Setting is achieved via a mechanical J-slot system using standard right-hand (or optional left-hand) rotation. Once the tool is positioned, applying set-down weight activates the slips and compresses the packing elements, sealing off the formation below. Retrieval is straightforward—lifting the tubing string engages the J-slot and reopens the bypass valve for safe circulation and recovery.

The Mech-1 features a rocker-type slip design for positive casing engagement and can be repositioned if required. Its straightforward operation, reliable sealing, and retrievability make it a practical solution for conventional production completions, casing leak diagnostics, and test operations where hydraulic setting is not required.

View Details

Wireline Retrievable FRN 4.5 inch SCSSSV

The FRN wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic-piston principle. To open, tubing pressure slightly higher than the well pressure below the closed flapper is applied. Once well pressure is equalized across the closed flapper, hydraulic pressure is applied to the piston, which pushes the flapper open. The flapper hinge assembly is designed so the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve's large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FRN valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline retrievable safety valves. Applications » New completions » Deep set » High pressure Features » High-strength rod-piston actuation » Non-equalizing flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of flow path of well production when valve is in open position » Designed for easy field servicing *information referenced from supplier catalog. View Details

Stickwelder 162 D

Unleash the Power of Versatility with the Stickwelder 162 D! At Canaweld, we understand the diverse welding needs of the construction, oil & gas industries, and more. That's why we are thrilled to introduce the Stickwelder 162 D - a welding marvel that offers high-quality performance across a wide range of metals and thicknesses, ensuring impeccable results in every project. Portable Powerhouse The Stickwelder 162 D is designed to be your reliable companion, offering portability, power, and versatility in one compact unit. Whether you require Stick Welding or TIG welding with a lift start, this welding machine rises to the occasion, delivering consistent and exceptional welds. Safety and Efficiency Combined We understand the challenges of adverse conditions, which is why we've equipped the Stickwelder 162 D with an extra function that reduces power draw, ensuring safer and more efficient performance in challenging environments. When precision matters, trust the Stickwelder 162 D to get the job done. Ideal for Light to Medium Duty Projects From construction sites to oil & gas projects, the Stickwelder 162 D is the ideal choice for light to medium-duty projects, providing reliability and flexibility in all weather conditions. Its lightweight construction and convenient carrying belt make transportation a breeze, ensuring you can take this welding powerhouse wherever the job demands. Weld with Confidence Enjoy excellent arc characteristics with the most common rods up to 5/32 inches, providing you with the confidence to tackle a variety of welding tasks. Experience low power consumption, making it energy-efficient and eco-friendly. Ready for the Outdoors The Stickwelder 162 D is designed to work outdoors with the appropriate power generator, offering you the freedom to take on welding projects wherever they may be. It's fan-cooled and thermally protected, ensuring durability and performance even in demanding conditions. The Canaweld Promise With Canaweld's Stickwelder 162 D, you can rely on the Canaweld promise of excellence and durability. Our comprehensive 3-year warranty further solidifies our commitment to quality and customer satisfaction. Get the job done right with the Stickwelder 162 D. Embrace the power of versatility, portability, and efficiency, and elevate your welding experience with Canaweld. Whether you're on a construction site or in the oil & gas industry, trust the Stickwelder 162 D to deliver flawless welds. Choose the welding machine designed with your needs in mind - the Stickwelder 162 D. Welding Perfected! View Details

HDI Gauge Batteries, Parts, and Repair Kits

HDI Gauge systems used in oil and gas operations are often exposed to harsh environments and continuous use. To maintain accuracy, reduce downtime, and extend the service life of these systems, it is critical to have access to replacement components that are both durable and compatible. A full range of spare parts is available to support maintenance needs, including displays, sensors, cables, processor boards, connectors, and housing elements.

These parts are designed to be interchangeable across compatible models, allowing operators to replace worn or damaged components without requiring full system replacement. This modularity improves cost efficiency and simplifies logistics, especially in remote field locations. Most components are field-replaceable, reducing the need for specialized service technicians and enabling faster return to operation.

Processor boards and display units typically share a common design across multiple gauge models, streamlining inventory requirements and providing flexibility during urgent repairs. Sensors are matched with gauge heads for calibration accuracy but can be easily re-paired and recalibrated in the field or through service support if needed.

Using certified or manufacturer-specified replacement components ensures continued compliance with safety standards, maintains the expected measurement accuracy, and supports the longevity of the equipment. These parts are often backed by service documentation or part tracking for maintenance records and equipment history management.

In short, a well-organized supply of compatible, high-quality parts is essential for effective pressure and temperature gauge system upkeep in demanding industrial settings.

View Details

Ball Valve Lever Operated – 3-Way Tube OD Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Tube OD Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows fluid to be routed between multiple tubing lines, making it useful for applications such as flow diversion, sampling, injection systems, or process line bypasses.

The side entry design provides easier access to the ball and internal components for maintenance or inspection, while also allowing compact installation in tight piping layouts. The tube OD connections enable direct attachment to tubing without additional fittings, simplifying assembly, reducing potential leak points, and providing secure, inline connections.

The valve uses a floating ball design to ensure consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and reliable with a quarter-turn lever, providing fast control with low torque. The internally loaded stem with shoulder prevents blowout, and replaceable seats and packings allow maintenance without replacing the entire valve.

View Details

Check Valve Poppet Type – Male x Female 3/8" NPT – 6000 PSI – ISO 9001

The 3/8" poppet type check valve with male × female NPT connections is designed for uni-directional flow control and backflow prevention in oil and gas systems. The poppet mechanism provides fast response to flow changes and a positive seal under pressure, ensuring protection of pipelines, pumps, and equipment from reverse flow or pressure transients.

The 3/8" size is suitable for small to medium diameter lines, instrumentation, sampling, and control applications. Male × female NPT connections allow secure inline installation, reducing potential leak points and enabling integration into existing piping without additional adapters.

The valve has a standard working pressure of 6000 psi, with optional configurations rated up to 10000 psi. Selectable cracking pressures range from 1/3 to 25 psi, allowing precise adjustment for system requirements. Construction materials include corrosion resistant SS 316, SS 316L, Duplex, Super Duplex, Hastelloy C276, Inconel 625, Monel 400, and Brass, providing durability in harsh oil and gas environments.

All valves are factory tested for cracking and reseal performance, with pneumatic testing at 1000 psig to verify seat integrity. Heat code traceability ensures material verification, and additional testing including vibration, temperature, and helium is available for critical applications requiring high reliability.

View Details

Blind Box for Wireline

Unlocking Efficiency with HOCA Oil Tools B.V.'s Advanced Slickline Blind Boxes In the complex world of oilfield services, particularly within the realm of slickline operations, the versatility and precision of downhole tools are of paramount importance. At HOCA Oil Tools B.V., we take pride in our comprehensive range of slickline blind boxes, designed to enhance operational efficiency and safety in the oil and gas industry. Our Type ‘A’ Blind Box series demonstrates our commitment to innovation and quality, catering to a wide range of operational needs. Main Features of HOCA's Slickline Blind Boxes: Diverse Size Range: Available in nominal sizes from .375 inches to 6.687 inches, catering to a broad spectrum of wellbore sizes and wireline operations. High-Quality Materials: Manufactured using robust materials, our blind boxes are designed to withstand the rigors of downhole environments, ensuring reliable performance. Precision Engineering: The precision in crafting each blind box, from threading to length specifications, ensures optimal performance and compatibility with existing slickline tool strings. Customization: Besides standard sizes, we offer custom orders to meet unique operational needs, ensuring that all aspects of the blind box, from thread type to length, are tailored to client specifications. Operational Efficiency: Designed for easy integration and use, our blind boxes help streamline slickline operations, reducing downtime and enhancing overall efficiency. Technical Support: HOCA Oil Tools B.V. provides comprehensive technical support, ensuring that our clients have the guidance needed to select and utilize the most appropriate blind boxes for their operations. At HOCA Oil Tools B.V., we understand the critical nature of slickline operations in the oil and gas industry. Our slickline blind boxes are a testament to our commitment to quality, innovation, and customer service. Choose HOCA for your downhole tool needs and experience the difference that professional-grade tools, backed by industry-leading support and expertise, can make in your operations View Details

Double Insulated AWG 2/0 Cable

Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. View Details

DeltaV Backbone Infrastructure

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

Industrial Ethernet

Industrial Ethernet Solutions by Nulux Network Solutions: Unifying Robust Connectivity in the Oil and Gas Sector Navigating the robust yet intricate world of the oil and gas industry necessitates a network that can not merely withstand the test of operational rigours but can effortlessly blend reliability with performance. At the heart of ensuring such seamless communications and data transfer within your intricate operational frameworks rests Industrial Ethernet, and at the helm of delivering exemplary Ethernet solutions is Nulux Network Solutions. A Beacon in the Industrial Networking Landscape: Nulux Network Solutions In a sector that doesn’t afford the luxury of pauses, your network must not merely be a conduit for communication, but a fortress of secure, unwavering, and efficient data transfers. For over two decades, Nulux has been a pivotal part of countless industrial projects across North America, offering a spectrum of networking solutions, with a notable proficiency in Industrial Ethernet solutions, among others. Our seasoned team, embodying a meticulous and perfectionist ethos, not only installs, maintains, and troubleshoots copper cabling systems including ethernet but elevates the quality of workmanship, sculpting solutions that are resilient, reliable, and tailor-fitted to your unique operational needs. The Quintessence of Copper in Your Industrial Ethernet Framework Ensuring that your business thrives in the dynamic arena of energy extraction and refinement, Nulux provides a well-rounded, comprehensive copper network design, maintenance, and upgrade solution, harnessing the intrinsic virtues of copper: Unbridled Data Transmission: Safeguarding data transfers up to 10 Gbps, ensuring your operations are never bottlenecked by data transfer delays. Unwavering Reliability: Guaranteeing a network that stands undeterred amidst operational demands. Affordability & Ease: Merging cost-effectiveness with simple installation and termination procedures. Nulux's Industrial Ethernet: Solidifying Your Operational Backbone As technology continues to weave itself into every fabric of the industry, industrial Ethernet by Nulux stands as a testament to a network solution that is flexible yet fiercely durable and reliable. Our service ambit encapsulates: Pioneering Network Designs: That dovetail impeccably with your existing and prospective operational frameworks. Constant Network Evolution: Ensuring your networks are perpetually contemporaneous, mitigating obsolescence. Bespoke Solutions: Tailoring our services to precisely cater to your unique data, voice, and video service requirements. Your Operations, Backed by Nulux’s Industrial Ethernet Expertise In a sector where every byte of data, every communication, and every connection can be pivotal, Nulux ensures that your operations are perpetually enveloped in a cocoon of sturdy, reliable, and efficient network infrastructure. Our Industrial Ethernet solutions, fortified by the proven reliability of structured cabling and our unwavering commitment to impeccable service delivery, stand as a silent, steadfast guardian of your operations, facilitating operational continuity and data integrity. Allow Nulux Network Solutions to become the architects of your network infrastructure, ensuring that while you navigate through the operational complexities of the oil and gas sector, your data travels through a network that is as resilient, reliable, and robust as your operations demand. Contact Nulux Network Solutions today, and let’s sculpt a future where your network is the least of your concerns, ensuring your focus remains undeterred – on operational excellence and industry leadership. View Details

Toolbox for hand tool storage on industrial worksites

The usefulness of the tool box is unmatched as it provides safety, protection and easy access to tools. By storing your tools, you'll increase their working life. Storing your tools prevents them from collecting dust, grease, and rust. If you take care of your tools, they'll last longer and perform better. Storing your tools in a toolbox also allows you to save money, as you'll avoid having to replace damaged ones. Not to mention your tools won't "walk away" when you are not looking. View Details

Tubing Hanger 2 3/8

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required. View Details

Lean Environmental Services System (LESS)

Are you looking for a game-changing solution that can revolutionize your oil and gas operations? Look no further than the Lean Environmental Services System (LESS) unit, the innovative mobile system designed to minimize pollution, risks, costs, and time during well service operations. The LESS unit is specifically designed to support and assist various well service operations such as electric line, slickline, and coiled tubing. By preventing any fluid or gas releases during these operations, the LESS unit can eliminate risks to people and the environment. The unit stores all the fluids into its tanks, reducing the risk of spills and leaks that can lead to costly cleanup operations and environmental damage. In addition to reducing risks and pollution, the LESS unit can significantly reduce costs and time associated with well service operations. With its efficient design and advanced technology, the unit can streamline operations and enhance productivity, resulting in faster job completion and higher efficiency. But that's not all - the LESS unit also offers the possibility to re-inject fluids into the well at the end of the job, further reducing environmental impact and promoting responsible resource management. With its sustainable features and advanced technology, the LESS unit is a powerful tool for companies looking to improve their environmental performance and reduce their carbon footprint. Don't miss out on the opportunity to revolutionize your operations with the Lean Environmental Services System (LESS) unit. Contact us today to learn more about how this innovative mobile system can benefit your business and help you achieve your sustainability goals. View Details

Freight Trucks available in multiple countries for various hauling applications

The demand for truck transport continues to grow and companies have realised it is effective to enter into long term contracts with dedicated service providers. Find the best equipment customised for your needs. Truck transportation effectively remains the most direct solution for the transport of goods and cargo, it is also one of the fastest solutions. In other words, cargo is moved directly from point A to point B without requiring any change in transportation methods, as can be the case with other methods. Contact us to to discuss the truck you want and what the possibilities are. View Details

Slickline Jars

Maximizing Downhole Efficacy with HOCA Oil Tools B.V.'s Slickline Jars In the ever-evolving landscape of oil and gas exploration and production, the precision and reliability of downhole operations are paramount. At HOCA Oil Tools B.V., we pride ourselves on our extensive expertise and innovative solutions in the field of slickline technology, particularly our diverse array of slickline jars designed to address a wide range of downhole challenges. Unparalleled Benefits of HOCA's Slickline Jars: Enhanced Operational Efficiency: Our jars significantly reduce non-productive time by enabling more effective and quicker responses to downhole sticking issues. Improved Downhole Dynamics: With the capability to deliver upward and downward jarring forces, our slickline jars optimize the impact on the obstruction, ensuring successful resolution of downhole incidents. Versatility Across Conditions: Designed for a variety of wellbore environments, our jars ensure optimal performance regardless of the downhole conditions. Superior Material and Construction: Crafted from high-grade materials, our jars withstand the extreme pressures and temperatures encountered downhole, ensuring durability and longevity. Customization for Specific Needs: Our extensive range accommodates different sizes and operational requirements, ensuring that every operation has the precise tool needed for the job. Safety and Reliability: Engineered to meet rigorous industry standards, our slickline jars enhance the safety and reliability of wireline operations. Diverse Array of Slickline Jars: Hydraulic Jars: Ideal for controlled, consistent jarring actions in sticky situations, providing the necessary force while minimizing risk to the toolstring and wellbore. Mechanical Jars: Known for their robustness and reliability, suitable for a variety of downhole conditions, offering immediate response to obstructions. Spring-Loaded Jars: Designed for situations requiring fast, sharp impacts, these jars are perfect for dislodging stuck tools or debris. Intensifier Jars: Amplify the impact force, ideal for extreme conditions where additional power is needed for jarring actions. Bi-Directional Jars: Capable of delivering both upward and downward forces, providing versatility and efficiency in clearing obstructions. At HOCA Oil Tools B.V., our commitment to innovation, quality, and customer service is at the core of our business philosophy. Our slickline jars are testament to this commitment, designed not only to meet but exceed the operational demands and challenges faced by our clients in the oil and gas industry. With HOCA Oil Tools B.V., you are choosing a partner dedicated to providing you with the best in slickline technology solutions. Explore our range of slickline jars and discover how we can enhance the efficiency and safety of your downhole operations. View Details

Ball Valve Lever Operated – 3-Way Female x Female Side Entry End Connection – 1/4”, 3/8”, 1/2”, 3/4”, 1” – 6000 PSI – ASME B16.34 / ISO 9001

The Ball Valve Lever Operated 3-Way Female × Female Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows flow to be directed between multiple pipelines, making it ideal for applications such as flow diversion, sampling lines, injection systems, or process line bypasses.

The valve supports split flow and is suitable for pressures up to 6000 PSI (maximum 10000 PSI on request) and temperatures from –40 °F to 450 °F (–40 °C to 232 °C).

The female × female connections enable secure inline installation without the need for male fittings, simplifying assembly and reducing potential leak points. The valve features a floating ball design for seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions.

It is manufactured and tested to ASME B16.34 standards, pressure-temperature rated to ASME B31.3, and type-tested to MSS-SP-99, providing verified performance and reliability in industrial environments.

Operation is efficient and reliable with a quarter-turn lever, allowing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, while replaceable seats and packings extend service life. Fire-safe designs and optional compliance with NACE MR0175 standards are available, and heat code traceability ensures material verification.

Built for demanding industrial environments, the valve is suitable for a wide range of oil and gas applications where flow control, diversion, and durability are critical.

View Details

NWB-25 Charger

Maximize Your Mining Equipment's Performance with the Wisdom NWB-25A Charger from Provix Provix is proud to introduce the Wisdom NWB-25A Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This advanced charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Universal Compatibility and High Efficiency The NWB-25A Charger is versatile and adaptable, with AC input compatibility ranging from AC 100-240V +/- 10%, 0.3A, 50-60 Hz, ensuring it can be used in various locations around the world. It also features a DC input of 7~30 V, 1.7 A, making it suitable for a wide range of applications. Optimized Charging for Wisdom Equipment Designed to work seamlessly with Wisdom's range of mining lamps, the NWB-25A offers a maximum DC output voltage of 4.56 ± 0.05 V and a DC output current of 2400 mA ± 100 mA. This ensures fast and efficient charging times: 5 hours for the KL8M, 4-5 hours for the KL5M, and 6 hours for the KL12M, minimizing downtime and enhancing productivity. Global Standards Compliance The NWB-25A Charger is equipped with AC plugs that conform to US, EU, UK, or AU standards, catering to different markets and ensuring compliance with global electrical standards. This feature makes the NWB-25A ideal for mining companies operating in multiple countries. Compact and Lightweight Design With its compact size (116 x 76 x 56 mm; 4.6 x 3.0 x 2.2 in) and light weight (215 g; 7.58 oz), the NWB-25A is highly portable, easy to transport, and convenient to use in various settings, from mining sites to office environments. Enhance Your Charging Experience The Wisdom NWB-25A Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit www.provix.net or contact our expert team. View Details

Company Type

Availability

Quality Assurance

Condition

Transaction Type

Sign in

Welcome back

Company Type

Availability

Quality Assurance

Condition

Transaction Type