Ballycatter.ca - Industrial Equipment

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

Firewater pump for offshore platforms and onshore installations

Fire pumps are an essential part of many water-based fire protection systems. They are used to increase the pressure (measured in psi and bar) of a water source when that source is not adequate for the system it's supplying. As part of a fire sprinkler system, a fire pump receives water from either an underground water supply or a water tank, lake, or reservoir, and is powered by electricity or diesel fuel. The high-pressure supplied by the pump distributes water through the sprinkler system and hose standpipes. Fire pumps are typically made with non-corrosive internal parts to avoid clogging due to corrosion. View Details

Tube Fittings Bore Through Male Connector NPT Thread – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Bore Through Male Connector NPT fittings are engineered to create robust, leak-free connections in high-pressure systems. These fittings feature a bore-through design, allowing fluid or gas to flow freely without obstruction, which minimizes pressure drop and ensures consistent system performance. Made from high-quality materials, they are suitable for pressures up to 6000 PSI and are manufactured to meet ASME B16.34, MSS-SP-99, and ASME B31.3 standards.

The NPT (National Pipe Thread) male connection ensures a tight seal when connected to compatible threaded components, providing reliable performance in oil and gas, chemical, and process industries. The fittings are precision-machined for proper ferrule deformation, which ensures leak-free connections under vibration, impulse, or vacuum conditions. Silver-plated threads reduce friction and prevent galling, while the bore-through design supports high flow rates without obstruction.

Bore Through Male Connector NPT fittings are easy to install and maintain. They are finger-tight for initial assembly and then wrench-tightened to achieve a secure seal, reducing installation errors and downtime. Their design allows disconnection and reconnection without compromising sealing integrity, making them suitable for applications requiring frequent maintenance or system modifications.

These fittings are unique in combining full-flow capability, high-pressure performance, and reliable sealing in a compact, easy-to-install form, making them ideal for demanding oil and gas systems, process lines, and high-pressure instrumentation setups.

View Details

Fiber Optic Splice on Connectors

Solidifying Your Fiber Optic Networks with Nulux’s Splice-On Connectors In the vast and dynamically intricate world of the Oil and Gas industry, where every drop of energy and every byte of data pulsates through extensive networks, ensuring stability, reliability, and durability in communication is pivotal. In this domain of seamless connectivity, Nulux Network Solutions, proudly presents its stellar service of Fiber Optic Splice-On Connectors, a vital link in fortifying and enhancing your fiber optic networks. Unveiling the Potency of Splice-On Connectors Splice-on connectors employ the refined technology of fusion splicing to facilitate the installation of standard fiber optic connectors even amidst the rigors of the field. In essence, they provide exceptionally low-loss terminations, becoming a fundamental component, particularly in sprawling and multifaceted fiber optic networks where every decibel of loss is critical. Not just a technological solution, splice-on connectors, when adeptly utilized in the right environments, endow the network with a termination that is not only highly durable but can also stoically endure the harsh and often unyielding conditions, so synonymous with the oil and gas sector. Nulux’s Splice-On Connectors: A Synthesis of Technology and Reliability Nulux Network Solutions, steeped in its unwavering commitment to providing products, solutions, and services across the entirety of the energy value chain, seeks to uplift and support the Oil and Gas sector by ensuring that every bit of your data, every communication, is transmitted with absolute integrity. Choosing Nulux for your Fiber Optic Splice-On Connectors means: Embarking on Sustainable Connectivity: Our services go beyond mere installations and solutions; we are your partners in charting a course towards a sustainable future, ensuring that every connection, every splice, is a step towards enhanced operational and environmental efficacy. Optimizing Network Performance: Our splice-on connectors, renowned for their low-loss terminations, ensure that your complex networks are bolstered with optimal performance, minimizing loss and maximizing data transmission integrity. Enduring Harsh Realities: The rugged durability of our splice-on connectors assures that even amidst the most austere and challenging conditions, your terminations remain steadfast, ensuring continuous, unimpeded connectivity. Forge Ahead with Confident Connectivity In an industry where data and communication flow with an undercurrent of criticality akin to the resources being extracted, processed, and transmitted, Nulux Network Solutions stands as a beacon of reliable, sustainable, and superior quality connectivity solutions. Join us in a journey where every splice is a testament to robust, unyielding, and impeccable connectivity, ensuring that every bit of data courses through your networks with precision and reliability, even in the most stringent of environments. Navigate through the pulsating veins of your operations with Nulux’s Fiber Optic Splice-On Connectors – because when it comes to connecting the vital lifelines of your operations, we ensure that every connection counts. View Details

HDI 2100 Pump Stroke Counter System

The HDI 2100 Pump Stroke Counter System is an electronic device designed to monitor mud pump performance in oil and gas drilling operations by accurately counting and displaying the number of strokes and stroke rates of up to four pumps simultaneously. Mud pumps play a critical role in circulating drilling fluids (mud) through the wellbore, and monitoring their operation is essential to maintain drilling efficiency, detect malfunctions, and ensure safe operation.

This system provides real-time stroke data updated every second, allowing operators to track pump activity precisely. It consists of a stainless steel control head with an LCD display, a power pack, cables, and sensors (either microswitch or proximity types). The control head can be mounted on a control panel either from the front or back, offering flexibility for installation in existing drilling consoles.

The internal quartz crystal oscillator guarantees accurate stroke counting without drift, meaning the system does not require regular recalibration, reducing maintenance needs. The system is powered by a sealed 3.6V battery designed to last approximately 18 months under continuous operation. Field-replaceable processor boards simplify repair and troubleshooting without needing to replace the entire unit.

Operating in harsh environments common to both land and offshore drilling, the 2100 features a sealed stainless steel case and durable piezoelectric switches for long life even under high vibration conditions. It supports integration with Human Machine Interfaces (HMI) and Programmable Logic Controllers (PLC) through dual sensor outputs, enabling automated monitoring and control within drilling systems.

The stroke rate range covers 11 to 300 strokes per minute, with the total accumulated strokes displayed up to 65,535. Operating temperature ranges from -40°C to 100°C, making it suitable for a wide range of drilling environments. The system’s combination of rugged design, accurate measurement, and flexible installation makes it a reliable tool for real-time mud pump monitoring critical to maintaining drilling safety and operational efficiency.

View Details

Alternative Energy Solutions

Unlocking Profitable Alternative Energy Solutions: Mobile, Reliable, and Environmentally Responsible Lovat Gas Solutions is your trusted partner in developing profitable alternative energy solutions. We understand the importance of coordinating a dedicated team of experts and resources to deliver innovative, mobile, reliable, and environmentally responsible solutions that assist our clients and partners in their transition to new energy paradigms. With a key focus on safety, we are committed to helping you achieve your energy goals while maximizing profitability. Why choose Lovat Gas Solutions for your alternative energy needs? 1. Coordinated Expertise: Our team of skilled professionals brings together expertise from various disciplines to provide a comprehensive approach to alternative energy solutions. We coordinate the efforts of our talented individuals and resources to ensure seamless execution and deliver high-quality results. 2. Mobile Solutions: We recognize the importance of mobility in the ever-evolving energy landscape. Lovat Gas Solutions offers mobile energy solutions that can be easily deployed and adapted to your specific requirements. Whether it's mobile power generation, off-grid solutions, or energy storage, we have the flexibility to meet your needs. 3. Reliability: We understand that reliability is a critical factor in the success of your alternative energy projects. Our commitment to delivering reliable solutions is ingrained in every aspect of our work. You can rely on our expertise and experience to provide solutions that consistently meet your energy demands. 4. Environmental Responsibility: At Lovat Gas Solutions, we prioritize environmental responsibility in all our endeavors. Our alternative energy solutions are designed to minimise carbon emissions, reduce environmental impact, and contribute to a sustainable future. We take pride in helping our clients transition to cleaner energy sources with a focus on sustainability. Partner with Lovat Gas Solutions to unlock profitable alternative energy solutions. We are dedicated to understanding your unique energy needs, designing innovative solutions, and delivering tangible results. Whether you require short-term solutions or long-term strategies, our team is here to support your transition to new energy frontiers. Contact us today to discuss your alternative energy goals. Let our experienced team guide you through the process, providing you with mobile, reliable, innovative, and environmentally responsible solutions that drive profitability and contribute to a greener future. Trust Lovat Gas Solutions to be your partner in successful alternative energy initiatives. View Details

Geotechnical exploration rig

Geotechnical drilling is a method of investigating subsurface soils to provide data for engineering design prior to construction of buildings, dams, roadways and other infrastructure sites. The low impact and maneuverability of the geotechnical drilling rigs allow for free movement on geotechnical investigation sites with limited access, such as next to foundations, inside buildings, or under power lines. Use the centerline head side shift on our geotechnical drill rigs to simplify traditional geotech techniques such as: Augering Mud rotary SPT Shelby tubes Hard rock cores CPT View Details

ROV Backplate

Unleashing the Full Potential of the Lanai ROV with Poseidon M0020 Backplates At Poseidon Robotics, we are dedicated to pushing the boundaries of subsea exploration and empowering our customers with the most advanced and field-friendly tools. Our latest innovation, the Poseidon M0020 backplate, takes the capabilities of our Lanai ROV to new heights, offering a versatile and efficient solution for all your underwater missions. Designed for Field-Friendly Operations When it comes to subsea operations, ease of use and adaptability are paramount. We understand the challenges our customers face in the field, which is why we developed the Poseidon M0020 backplate with their needs in mind. Our team of experts meticulously engineered this backplate to optimize its performance and enhance the overall ROV experience. Unrivaled Connectivity and Expandability The Poseidon M0020 backplate is a feat of engineering, incorporating a carefully planned configuration that includes multiple threaded locations to accommodate various connectors, sensors, and accessories. With 8 locations threaded for 7/16-20 connectors, 7 locations threaded for M10 sensors, and a small M6 location for lights, this backplate opens up a world of possibilities for customization and expansion. Enhanced Functionality with Manipulators and Accessories We designed the M0020 backplate to provide optimal support for a grabber, such as the BLUEPRINTLAB Reach Alpha, and two auxiliary ports for accessories like sonar, USBL, or mini-SVX. This flexibility allows you to tailor the Lanai ROV precisely to your mission requirements, ensuring that you have the right tools at your disposal to get the job done efficiently and effectively. Durable Construction for Deep-Water Missions The Poseidon M0020 backplate is crafted from 7075 Aluminum, renowned for its exceptional strength and durability. This material not only ensures that the backplate can withstand the rigors of challenging subsea environments but also provides a depth rating in excess of 500 meters. With the M0020 backplate, you can explore deeper and reach areas that were previously beyond your grasp. Seamless Integration with Lanai ROV The M0020 backplate is designed specifically for the Lanai ROV, ensuring a perfect fit and seamless integration. As with all our products, the backplate undergoes rigorous testing and quality assurance procedures to meet our stringent standards. When you choose Poseidon Robotics, you can be confident that every component is engineered with precision and dedication to excellence. Elevate Your Subsea Missions with Poseidon Robotics Our Poseidon M0020 backplate is just one example of our commitment to providing innovative solutions that empower our customers to achieve their goals in subsea exploration. Whether you are conducting scientific research, performing complex inspections, or participating in search and rescue operations, our technology equips you with the tools you need to excel in your mission. Discover the Possibilities Today Explore the limitless possibilities that the Poseidon M0020 backplate brings to your Lanai ROV. Take your subsea operations to new depths and expand your capabilities with ease. Get in touch with Poseidon Robotics today to learn more about our advanced backplate and how it can revolutionize your underwater missions. Choose Poseidon Robotics for Unmatched Performance As the premier provider of subsea robotics and ROV solutions, Poseidon Robotics stands as a trusted partner to professionals worldwide. Our dedication to innovation, quality, and customer satisfaction sets us apart, and we are ready to join you on your journey of discovery beneath the waves. Let us be your guide to unlocking the hidden wonders of the deep ocean. View Details

Test Tools

Maximize Downhole Efficiency with HOCA Oil Tools' Advanced Test Tools In the highly specialized field of oil and gas exploration, precision, reliability, and efficiency are paramount. HOCA Oil Tools stands at the forefront of downhole technology, offering an extensive range of Test Tools designed to optimize and ensure the integrity of downhole operations. Our Test Tools are engineered to address the complex challenges encountered in modern well environments, enabling operators to conduct thorough evaluations and maintain control over their downhole conditions. HOCA's Test Tools: Precision Engineered for Optimal Downhole Performance HOCA Oil Tools' Test Tools are meticulously designed for testing tubing, locating leaks, setting hydraulic-set packers, and evaluating well integrity. These tools are crucial for maintaining well safety and efficiency, providing operators with accurate data to make informed decisions. Built from high-grade materials and adhering to strict industry standards, our Test Tools withstand the harsh downhole environment, delivering reliable performance and ensuring successful operations. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Test Tools means selecting a partner committed to your operational success. Our dedication to quality, innovation, and customer support ensures that our products not only meet but exceed the expectations of the demanding oil and gas industry. Integrating our Test Tools into your downhole operations signifies a step towards enhanced efficiency, safety, and cost-effectiveness. With HOCA Oil Tools, you gain more than just equipment; you acquire a strategic advantage backed by our expertise and unwavering support. Opt for HOCA Oil Tools for your downhole testing needs and join the ranks of satisfied clients who trust our Test Tools to optimize their operations. Partner with us, and harness the power of precision-engineered solutions to elevate your downhole success. With HOCA Oil Tools, empower your downhole operations with tools that set new standards for reliability, efficiency, and accuracy in the oil and gas industry. View Details

Tube Fittings Male Connector ISO Parallel Thread – 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1" – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Tube Fittings Male Connector with ISO Parallel Thread is designed to join tubing to parallel-threaded ports in high-pressure systems. This fitting ensures a tight, leak-resistant seal that maintains system integrity under pressures up to 6000 PSI, making it suitable for demanding oil and gas applications.

Constructed from high-quality materials, the fitting is manufactured to precise tolerances to ensure proper ferrule deformation and consistent performance. The parallel thread design allows for a straightforward installation and secure connection without excessive torque, reducing the risk of thread damage or galling.

These fittings are used extensively in pipelines, instrumentation, and process systems where a reliable and durable connection is required. The male connector configuration allows it to mate with female threaded components, providing versatility in system design. The robust design also ensures excellent performance under vibration, temperature changes, and fluctuating pressures.

Overall, this fitting combines technical reliability with ease of use, making it suitable for both engineering and operational personnel who require dependable tubing connections in oil and gas environments.

View Details

Wax Knife

Experience Unmatched Efficiency in Wellbore Cleaning with HOCA Oil Tools' Wax Knife In the highly specialized field of downhole operations, the quest for efficiency, precision, and reliability is ongoing. At HOCA Oil Tools, we understand the challenges faced by the oil and gas industry and are committed to providing solutions that not only meet but exceed these demands. A shining example of our commitment to innovation and quality is our Wax Knife, a pivotal tool designed for effective wellbore cleaning, particularly in the removal of paraffin buildup. HOCA’s Wax Knife: Tailored for Optimal Wellbore Maintenance The HOCA Wax Knife is expertly engineered to address the common yet critical issue of wax accumulation within wellbores. Crafted from premium materials and designed with precision, our Wax Knife ensures the thorough and efficient removal of wax, thereby maintaining optimal well performance. Ideal for a range of well conditions and compatible with various slick line diameters, the HOCA Wax Knife is a versatile tool essential for maintaining well integrity and flow. Elevate Your Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with innovative and reliable downhole solutions. Our Wax Knife exemplifies this dedication, offering a blend of efficiency, effectiveness, and durability that is unmatched in wellbore maintenance. Integrating the HOCA Wax Knife into your downhole maintenance regimen is not just an investment in a tool but an investment in the continued productivity and safety of your operations. Our commitment to excellence ensures that each Wax Knife we deliver meets the rigorous demands of downhole environments and helps our clients achieve their operational objectives with greater ease and efficiency. Discover the difference that a HOCA Wax Knife can make in your downhole maintenance operations. Choose HOCA Oil Tools for your wellbore cleaning needs and experience the highest standards of quality, efficiency, and customer service in the industry. Step up your well maintenance game with HOCA Oil Tools’ Wax Knife – the key to maintaining optimal well performance and operational safety. Contact us today to learn more about how our downhole solutions can revolutionize your operations. View Details

Field-bus Cabling

Harmonizing Field Operations with Nulux Network Solutions: Elevating Field-bus Cabling in the Oil and Gas Sector The labyrinthine networks of the oil and gas industry necessitate not only precise and accurate communication but also a robust data transfer pathway that remains unflinchingly reliable amidst the operationally intense environments. Nulux Network Solutions, seasoned with two decades of expertise, introduces meticulous and operationally integral Field-bus Cabling Solutions. Why Nulux Shines in the Networking Cosmos When your business demands a network infrastructure that serves as an impervious and ever-reliable backbone, the bespoke solutions provided by Nulux ascertain that your operations remain perennially seamless. Our extensive experience spans myriad industrial projects, including crucial DCS network upgrades across North America, establishing us as a linchpin in telecommunication and networking sectors. Championed by a team devoutly centered around unyielding perfectionism, Nulux not only provides but enhances copper cabling systems, ensuring they are not merely conduits but formidable and resolute pathways for your data to traverse through. Crafting Copper Networks with Nuanced Precision At Nulux, our copper network services are not confined to mere installation but envelop a 360-degree solution space that guarantees: Meticulous design, planning, and installation of new/existing networks Strategic upgrades to bolster operational efficiency Bespoke solutions catering to voice, data, and video services Tailored approaches meeting your distinct requirements Sustained technical support across your project’s lifecycle Copper, as a medium, brings forth myriad benefits to your network infrastructure, including high-bandwidth transmission (up to 10 Gbps), pronounced reliability, effortless installation, cost-effectiveness, and the inherent flexibility, reliability, and durability essential for operationally intense industries. Nulux’s Field-bus Cabling Solutions: A Nexus between Technology and Operational Excellence Your field-bus networks are not mere communication channels but the vital sinews that link your operational components into a cohesive and synchronous unit. Nulux’s Field-bus Cabling solutions are meticulously crafted, ensuring: Operational Harmony: Linking your diverse field devices and controllers into a synchronized operational entity Data Integrity: Ensuring data packets traverse through your networks with fortified security and integrity Reduced Downtime: Minimizing operational disruptions through a reliable and constant communication channel Enhanced Diagnostics: Facilitating real-time data transfers that enable precise control and diagnostics Scalability: Providing a network that evolves in tandem with your operational expansions and technological integrations Entrust Your Operations with Nulux In the relentless and unforgiving operational theatres of the oil and gas industry, where every byte of data is pivotal, Nulux’s Field-bus Cabling Solutions stand as a silent sentinel ensuring your operations are perpetually communicated, coordinated, and controlled with unyielding reliability. With an in-depth understanding of what truly fuels operational competitiveness in your industry, our hard-working team assures that while you steer your focus towards your core operations, your field-bus network functions as an unwavering, steadfast, and efficient data highway. Invigorate your operations with Nulux Network Solutions, ensuring every device, controller, and operational node in your field is perpetually in symphony, dictating a future where your operations and network are in seamless unison. Reach out to Nulux Network Solutions for an initial consultation and begin a journey where your field-bus network becomes a catalyst for operational excellence and reliability. View Details

Circulating Type Chokes for Nipples

HOCA Oil Tools: Mastering Flow Control with Circulating Type Chokes for Nipples In the specialized field of downhole operations, mastering the control of fluid flow within the wellbore is critical for operational success and efficiency. HOCA Oil Tools is at the forefront of this challenge, offering advanced solutions with our Circulating Type Chokes for Nipples. Designed to integrate seamlessly with landing nipples in the wellbore, these tools are essential for precise flow control and well management during various downhole activities. HOCA’s Circulating Type Chokes for Nipples: Precision Engineered for Optimal Flow Control Our Circulating Type Chokes for Nipples are designed for operators seeking to maintain precise control over fluid flow in their downhole operations. Whether for circulation, testing, or intervention tasks, our chokes provide the versatility and reliability needed in today’s diverse well environments. Constructed with the highest quality materials and engineered to withstand harsh downhole conditions, HOCA’s chokes ensure optimal performance and durability. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools’ Circulating Type Chokes for Nipples means opting for a solution that embodies innovation, quality, and operational excellence. Our commitment to providing cutting-edge downhole solutions ensures that our products meet the complex demands of modern oil and gas operations, delivering performance that exceeds expectations. Incorporating our Circulating Type Chokes into your downhole toolkit signifies a step toward enhanced operational control, efficiency, and safety. With HOCA Oil Tools, you gain not just a supplier but a dedicated partner committed to supporting your downhole challenges with advanced solutions and expert service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations with our Circulating Type Chokes for Nipples. Partner with us, and elevate your downhole flow control to new levels of precision and reliability. With HOCA Oil Tools, enhance your downhole operations with tools that redefine efficiency, safety, and performance in the demanding oil and gas industry. View Details

Bailer Sampling

InWaTec Combined: Streamlining Wellbore Clarity with Premier Sample Bailer Services In the ever-evolving landscape of drilling and production, the importance of maintaining a clean wellbore is paramount. At InWaTec Combined, we understand that the efficiency of your operations hinges on the clarity of the wellbore. That's why we offer comprehensive Sample Bailer running services, designed to support operations on drilling rigs, during workover operations, and in production wells, whether onshore or offshore. Optimizing Wellbore Integrity with Bailing Operations Bailing operations are a critical component of wellbore maintenance, aimed at collecting solids and cleaning the wellbore to ensure uninterrupted operations. InWaTec Combined's Sample Bailer services are tailored to meet the needs of any operation, providing a thorough cleansing of the wellbore and collection of solids that could otherwise impede production or damage equipment. Adaptable Services for Diverse Environments Whether it's the dynamic environment of offshore rigs or the structured demands of onshore wells, InWaTec Combined's Sample Bailer services are adaptable to any setting. Our equipment and expertise are suited to the unique challenges presented by both drilling and production phases, ensuring that we provide optimal solutions regardless of the environment. Leveraging Technology for Efficient Operations At InWaTec Combined, we utilize the latest technology in our Sample Bailer running services. This approach allows us to efficiently collect wellbore debris and samples, minimizing downtime and maximizing the productivity of the well. Our commitment to technological advancement means that we continuously improve our services to stay at the forefront of the industry. Safety and Environmental Stewardship We prioritize safety and environmental stewardship in all our operations. Our Sample Bailer services are conducted with strict adherence to safety protocols, ensuring the well-being of personnel and the preservation of the environment. We understand the importance of eco-friendly operations, especially in sensitive onshore and offshore locations. InWaTec Combined’s Commitment to Excellence Choosing InWaTec Combined for your bailing needs means partnering with a company that is committed to excellence. Our Sample Bailer running services are designed to deliver results with precision, safety, and environmental responsibility at the forefront. We are dedicated to providing services that not only meet but exceed industry standards. Conclusion: Your Clear Choice for Clear Wells In summary, InWaTec Combined’s Sample Bailer running services represent the highest standard in wellbore cleaning and sample collection. With our advanced technology, adaptable services, and unwavering commitment to safety and the environment, we are your clear choice for ensuring the integrity and productivity of your wells. Trust InWaTec Combined to deliver clarity and quality to your wellbore operations. View Details

Hydraulic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

Forklifts for material handling in the warehouse or on the job site

Forklifts are one of the most useful and powerful vehicles on any job site. They are used to handle materials, carry heavy loads, as well as load and unload goods from delivery vehicles and safely secure goods in hard to reach areas. When it comes to different types of forklifts, there are as many options to choose from as there are uses for them. A warehouse forklift is excellent for loading and unloading delivery vehicles and can be used to carry inventory, lift pallets and move goods over short distances. They can generally carry the weight of one to five tons and work best in indoor locations. View Details

7" Mech-2 Double Grip Mechanical Set Packer for 26-29 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Equalizing Sub-Assembly

HOCA Oil Tools: Innovating Efficiency with State-of-the-Art Equalizing Subs In the ever-evolving landscape of the oil and gas industry, the need for precision and efficiency in downhole operations is paramount. At HOCA Oil Tools, we recognize this imperative and respond with our innovative Equalizing Subs. These tools are specifically designed to enhance the operational capabilities of sub-surface controls like Locking Mandrels and Tubing Mandrels, ensuring seamless and efficient downhole activities. HOCA’s Equalizing Subs: Engineered for Unmatched Performance Our Equalizing Subs are crafted to facilitate the equalization of pressure differentials across Sub-Surface Controls, crucial for the safe and effective retrieval of these components. Available in various types, including 'ROTB', 'ROTF', 'ROTC', 'ROTD', and others, each is designed to meet distinct downhole conditions and operational needs, ensuring versatility across different well environments. Experience the HOCA Oil Tools Difference Choosing HOCA Oil Tools' Equalizing Subs means selecting a solution backed by innovation, quality, and unwavering support. Our commitment to excellence ensures that our products not only meet but exceed the stringent demands of the oil and gas industry. Whether addressing standard operations or facing unique downhole challenges, our Equalizing Subs provide the reliability and performance essential for today's downhole activities. Incorporating our Equalizing Subs into your operational toolkit is a step towards enhanced efficiency, safety, and success. With HOCA Oil Tools, you gain more than just a supplier; you gain a partner dedicated to supporting your downhole challenges with cutting-edge solutions and comprehensive service. Opt for HOCA Oil Tools for your downhole needs and unlock the full potential of your operations. Partner with us to harness the power of advanced downhole solutions designed for the modern oilfield landscape. With HOCA Oil Tools, empower your downhole operations with tools that redefine efficiency, reliability, and performance in the oil and gas industry. View Details

LM2500+G4 SAC 50Hz CC 1x1 Gas Turbine

The LM2500+G4 SAC 50Hz Combined Cycle 1x1 is a gas turbine system that combines a gas turbine with a steam turbine to improve overall power generation efficiency. This configuration captures waste heat from the gas turbine exhaust and uses it to produce steam, which then drives the steam turbine, generating additional electricity. This approach helps maximize power output while making better use of fuel energy.

Building on the LM2500+ design, the LM2500+G4 increases power capability by about 10% without reducing the lifespan of critical hot section components. This is achieved by increasing airflow, enhancing materials, and improving internal cooling. Despite these upgrades, the core compressor and turbine stages, as well as most airfoil and combustor designs, remain consistent with the LM2500 model.

The LM2500+G4 features a 17-stage high-pressure compressor that raises the engine’s pressure ratio and airflow, boosting the total power output of the gas turbine to over 31 MW. It uses a Single Annular Combustor (SAC) equipped with water injection to help control emissions while maintaining stable combustion. The SAC’s simple, proven design provides uniform flame temperature and reliable operation.

This balanced system is common in industrial and energy applications where efficiency and power output must be optimized, especially under varying ambient conditions. The combined cycle setup offers a reliable and efficient solution for electricity generation in demanding environments.

View Details

Pressure and Temperature Memory Gauge Service

Enhancing Well Performance Insights with InWaTec Combined’s Memory Gauge Services At InWaTec Combined, we recognize that the quest for efficiency within the oil and gas sector hinges on the precision of data collected from the depths of the earth. This is precisely why we offer top-tier Pressure and Temperature Memory Gauge Services—a tool crucial for optimizing well productivity and ensuring operational integrity. Our electronic Memory Gauges are engineered to withstand the rigorous conditions of the downhole environment, providing accurate records of pressure and temperature. These robust instruments are the sentinels of the wellbore, vigilantly recording data that is vital for the evaluation of well performance and reservoir behavior. The utilization of Memory Gauges is central to gauging bottomhole pressures and temperatures across varying production rates. This data is instrumental in conducting build-up and drawdown tests, which are essential for assessing well productivity. With the insights garnered from these tests, operators can make informed decisions about stimulation, enhancement, and management of their well systems. InWaTec Combined’s Memory Gauges are not just instruments; they are the bearers of information that can significantly impact the economics of well operations. By accurately capturing downhole conditions, our gauges assist in pinpointing production issues, facilitating timely interventions that can forestall costly downtime and mitigate potential hazards. Our commitment at InWaTec Combined is to provide our clients with not just data, but solutions that translate into cost savings, increased safety, and environmental protection. Investing in our Memory Gauge Services means investing in the longevity and prosperity of your wells. Let us partner with you to harness the full potential of your reservoirs with precision, reliability, and expertise that you can trust. View Details

Electric Submersible Pump ESP Packer – 7" – 3,500 PSI

The 7" ESP Packer is a single-mandrel, dual-bore, hydraulic-set production packer set in place using hydraulic pressure applied through the tubing. The dual-bore configuration includes a pass-through section that allows the electric cable to reach the ESP pump below the packer while maintaining isolation between the tubing and the annulus, enabling reliable deployment and operation of the ESP system for artificial lift in oil and gas wells.

The packer has bi-directional, case-carburized barrel slips that anchor it securely against well pressures from both above and below, preventing movement during operation. It can be retrieved with a straight upward pull on the tubing string and is available in both straight-pull and cut-to-release configurations to suit different well conditions.

The packer has a nominal size of 7" and fits 7" casing weighing 26–32 PPF or 7-5/8" casing weighing 55.3 PPF. The outer diameter is 5.970", and the main bore inner diameter is 2.992". The assembly allows up to five feed-through lines for electric cables or injection lines, and the total length is 125".

The body is made from L80 material with HNBR elastomer seals, rated for pressures up to 3,500 PSI and temperatures from 70°F to 300°F. Connections include a 3-1/2", 9.2 PPF VAM TOP box at the top and a 3-1/2", 9.2 PPF VAM TOP pin at the bottom. The release weight is 68,800 lbs. The packer meets API Validation Grade V3 and Quality Level QL1 standards, providing reliable performance under standard service conditions.

These attributes make the ESP packer reliable for high-load applications, adaptable to various completion designs, and efficient in facilitating ESP deployment in oil and gas wells.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 32-35 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Gauge Root Valve – Bleed Valve with Vent Tube and Handle – 6000 PSI – ASME B16.34 / ISO 9001 / PED / ATEX

The Gauge Root Bleed Valve with vent tube and handle is a high-pressure valve designed to provide safe venting and pressure release in industrial and oil and gas systems. It is typically installed in high-pressure piping where pressure gauges or instruments are connected, allowing operators to isolate and safely bleed off pressure for maintenance, calibration, or inspection. The vent tube directs released media away from the operator, reducing the risk of injury or contamination, while the handle provides easy and precise manual operation.

This valve is rated for 6000 PSI standard working pressure, with higher pressures available on request, and is constructed with a metal-to-metal body and bonnet seal for reliable sealing at high temperatures and pressures. It features a backseat stem for added security, a self-centering, non-rotating tip to ensure leak-free performance, and a simple adjustable gland retainer to maintain packing stability over time.

Factory testing includes pneumatic tests with nitrogen at 1000 PSI to verify seat and packing integrity, with a maximum allowable leak rate of 0.1 sec/min. The valve materials can be supplied in stainless steel or other corrosion-resistant alloys and are compatible with NACE MR 01-75 standards. Heat code traceability ensures quality control and material verification for critical applications.

This valve is essential for safely isolating and venting pressure from instruments, gauges, or process line.

View Details

Subsurface Safety Valve for Injection Wells 5.4 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

TIG AC/DC 201 Pulse-D

5 1/2" Mech-2 Double Grip Mechanical Set Packer for 13-15.5 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Nuts and bolts for fastening industrial equipment. Metric bolts and Imperial bolts with special metallurgy

A nut is a small metallic piece of metal with a spiral cut groove that runs around a hole in its center while a bolt is a metallic piece with a round stem as its body and threaded into one end. Bolts have different length sizes while nuts have a standard size. Studs provide the ability to obtain much more accurate torque values be- cause they don't twist during tightening as bolts do. Bolts and nuts can be made of various materials such as steel, titanium or plastic. The finish or plating on a metal bolt or nut affects its look and durability. Below are some common finishes and benefits: Zinc - Most common, low cost, resists corrosion and rust Nickel - Very hard finish, higher investment, good corrosion resistance Chromium – Bright finish, good rust and corrosion resistance Chromate – Adds color, shine, superior rust resistance Anodizing - Aluminum, hard oxide surface, excellent corrosion resistance View Details

Pumpjack C-1824D-305-240

The Lufkin Conventional Crank Balanced Pumping Unit, widely known and accepted, is the old reliable “Work Horse” of the oil patch. This is the most universally adaptable unit in the Lufkin line. These units are simple to operate and require minimum maintenance. Unit Size* C-1824D-305-240 A 120.00 B 228.00 C 340.00 E 263.50 F 396.50 H 545.00 I 25.50 J 110.00 L 64.00 M 80.25 N - N1 24.50 R 161.00 T 58.88 U 92.38 V 52.00 W 50.00 X 112.50 AA 51.69 AB 90.88 UU 24.13 VV 57.00 In addition to being the world’s leading manufacturer and supplier of sucker rod pumping units, Lufkin Oilfield Services refurbishes and sells used pumping units and provides installation, field service, machine shop repair and new OEM parts for its’ customers. All brands – Lufkin, Churchill, American, LeGrand, Bethlehem, National, etc. – are supported. Additionally, Lufkin Automation is the industry leader in oil production automation and well optimization products and services (pump-off controllers, dynamometers, fluid level equipment, well analysis, design/analysis software, well design consulting and training). With the acquisition of Delta-X and Nabla and with thousands of controllers in service, Lufkin Automation continues the Lufkin tradition of helping producers lower their production costs and optimize well efficiency. View Details

MIG/STICK 221 Welding Machine

Experience Unrivaled Power and Versatility with the MIG/STICK 221 Welding Machine When it comes to welding machines that blend power, portability, and versatility, the MIG/STICK 221 from Canaweld stands in a league of its own. As the most powerful welding machine in the MIG/STICK series, this exceptional unit is designed to handle the toughest welding tasks with ease, making it the go-to choice for welding professionals in the oil and gas industry. Powerful and Lightweight - The Perfect Combination The MIG/STICK 221 strikes the perfect balance between power and portability. With the ability to weld up to 3/8-inch steel in MIG or SMAW mode, this machine ensures a stable and reliable arc, allowing for precision in every weld. Its lightweight and portable design make it the ideal companion for light to medium-duty welding operations, whether in your garage, at home, or at your local auto body shop. Unmatched Features for Superior Performance At Canaweld, we believe in providing our customers with cutting-edge features that enhance their welding experience. The MIG/STICK 221 boasts an array of features that set it apart from the rest: • Wide range of welding amperage up to 220A, giving you the flexibility to handle various welding applications with ease. • High power output, with 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, ensuring consistent performance during demanding tasks. • Designed to withstand extreme environments, the MIG/STICK 221 is tested in temperatures of 104°F/40°C, guaranteeing reliable operation under challenging conditions. • Inverter power supply with excellent MIG and Stick welding qualities, providing smooth and precise welds. • Automatic compensation for main power fluctuations within ± 20%, ensuring a stable welding process. • Capability to use up to 165 feet (50 meters) of lead without any power loss at the weld, offering extended reach for your welding projects. • High-quality metal double drive roll system for accurate and consistent wire feed, preventing bird nesting and improving efficiency. • Welds steel and aluminum up to 3/8″ thick, allowing you to tackle a wide range of materials with ease. • Graduated knob for precise settings, giving you full control over your welding parameters. • Automatic regulation of wire speed using motor voltage feedback, providing an exceptionally steady arc with minimum splatter for high-quality welds. • Overheat prevention with a fan and thermal protection, ensuring the longevity of your welding machine. • Built-in polarity changeover feature for most common gas and gasless wires, enhancing welding flexibility. • Durable metal face panel for added protection and longevity. Elevate Your Welding Experience with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld leads the way with innovative technology and unmatched performance. The MIG/STICK 221 is a testament to our commitment to delivering excellence in every product we offer. Unlock the true potential of your welding operations with the MIG/STICK 221. Experience the power, precision, and reliability of Canaweld's welding solutions, and take your welding projects to new heights. Choose Canaweld for Your Welding Needs With a comprehensive 3-year warranty and a track record of delivering top-notch products, Canaweld is the name you can trust for all your welding requirements. Join the league of welding professionals who rely on the MIG/STICK 221 for exceptional results and unmatched performance. Upgrade your welding capabilities today with Canaweld's MIG/STICK 221. Invest in excellence and elevate your welding experience to a whole new level. View Details

Shear Down Pulling Tools for External Fishing Necks

Optimize Your Downhole Retrieval Operations with HOCA Oil Tools' Shear Down External Fishing Neck Pulling Tools In the intricate world of oilfield operations, ensuring seamless downhole tool retrieval is pivotal for maintaining efficiency and minimizing downtime. HOCA Oil Tools, a specialist in crafting superior downhole slick line tools, proudly presents its Shear Down External Fishing Neck Pulling Tools. These tools are engineered with precision to facilitate the secure and efficient retrieval of subsurface equipment, enhancing operational effectiveness and safety. HOCA’s Shear Down External Fishing Neck Pulling Tools: Precision Engineered for Enhanced Retrieval Our Shear Down External Fishing Neck Pulling Tools are designed for operators who demand reliability and precision in their downhole activities. Built to engage and retrieve subsurface equipment with external fishing necks, these tools are essential for operations requiring the removal of downhole instruments. Equipped with a shear-down mechanism, these pulling tools allow for disengagement in scenarios where the retrieved equipment becomes immovably stuck, thereby ensuring the safety and continuity of operations. Experience the Difference with HOCA Oil Tools At HOCA Oil Tools, we are dedicated to providing the oil and gas industry with downhole solutions that meet the demands of modern well operations. Our Shear Down External Fishing Neck Pulling Tools represent our commitment to innovation, quality, and customer satisfaction. Whether you are addressing routine retrieval tasks or facing complex downhole challenges, our tools are designed to enhance the efficiency, safety, and success of your operations. By incorporating our Shear Down External Fishing Neck Pulling Tools into your downhole toolkit, you are choosing a product that delivers on the promise of operational excellence. With HOCA Oil Tools, you gain not just a supplier, but a partner committed to supporting your success with state-of-the-art solutions and expert service. Choose HOCA Oil Tools for your downhole needs and take the first step towards more efficient, safe, and cost-effective retrieval operations. Elevate your downhole performance with HOCA Oil Tools – where innovation, quality, and reliability come together to drive your success. View Details

4 1/16 inch Gate Valve rated to 5000 psi operating pressure

Gate valves are an energy-efficient valve option, as the movement direction or ram is perpendicular to the media flow direction. As a result, less power is consumed when opening or closing the gate valves in comparison to globe valves. Due to their energy-efficiency, they help reduce total ownership cost. View Details

Wire Brush for Slickline

Achieve Superior Wellbore Cleanliness with HOCA Oil Tools' Wire Brush In the demanding realm of oil and gas extraction, the cleanliness and integrity of wellbores are paramount for operational success. Recognizing this critical need, HOCA Oil Tools has developed a premier solution: the Wire Brush, an essential component of our comprehensive downhole slick line tools portfolio. Designed to tackle the toughest wellbore contaminants, our Wire Brush is engineered for excellence, ensuring your operations maintain peak efficiency and safety. HOCA's Wire Brush: Pioneering Downhole Cleanliness At HOCA Oil Tools, we understand that every downhole environment poses unique challenges. That's why our Wire Brush is meticulously crafted to remove deposits, scale, and other obstructions with unmatched efficiency. Constructed from durable materials capable of withstanding harsh downhole conditions, the HOCA Wire Brush is your ally in maintaining wellbore integrity and optimizing production flow. Elevating Downhole Maintenance with HOCA Oil Tools Innovation, quality, and customer satisfaction are at the core of HOCA Oil Tools' mission. Our Wire Brush exemplifies these values, providing a solution that not only meets but exceeds the demands of modern downhole operations. With the HOCA Wire Brush, operators can expect a level of cleanliness and efficiency that sets new industry standards. Adopting the HOCA Wire Brush into your downhole cleaning regimen is an investment in your operation's future. It signifies a commitment to operational excellence, safety, and cost-effectiveness. Our dedicated team at HOCA Oil Tools is committed to supporting your success by providing superior downhole solutions that address the specific challenges of the oil and gas industry. Embrace the future of downhole maintenance with HOCA Oil Tools’ Wire Brush – your solution for maintaining pristine wellbores and maximizing operational outcomes. Experience the difference that comes with using tools crafted for excellence and backed by an unwavering commitment to your operational success. Choose HOCA Oil Tools for your downhole needs and join the ranks of industry professionals who trust our Wire Brush to keep their operations running smoothly, safely, and efficiently. View Details

3” Sleeve Style Hot Air Purge Valve

The 3-inch sleeve-style hot air purge valve is designed for aero-derivative industrial gas turbines to control the flow of hot compressor bleed air used in critical purge operations. This valve is normally closed and solenoid-pilot actuated, available in two- or three-inch sizes with elbow sleeve design. It operates on 24 or 125 VDC power and is constructed with ANSI B16.5 Class 600 raised face flanges.

Key specifications include a physical size of approximately 7.5 inches wide and 25 inches high, weighing between 84 to 91 pounds. It can handle line pressures up to 500 psig and actuation pressures between 80 and 125 psig. The valve is rated to operate in fluid temperatures ranging from 32°F to 1100°F (bleed air), and can withstand ambient temperatures between –20°F and 240°F with heat soak up to 400°F for 1 to 2 hours when de-energized.

Performance characteristics include a flow capacity of about 1.2 pounds per second of compressor bleed air with a maximum pressure drop of 0.70 psi across normal operating conditions. Internal leakage is minimal, rated at 0.00025 pounds per minute. The valve features a rapid full stroke response time of 1 second for both opening and closing cycles. It includes a position indicating switch and supports continuous duty operation.

Functionally, this valve plays a crucial role in purging residual fuels, such as diesel, from the combustor fuel lines when switching fuels, preventing deposits that can impair turbine performance or cause damage. The valve is often installed in pairs for dual redundancy to enhance safety and operational reliability. With millions of field operating hours, this design reflects high durability and precise control essential for efficient and safe turbine operation.

View Details

Premium All-Function Welding Helmet

Introducing the Canaweld Premium All-Function Welding Helmet Series - Your Ultimate Welding Companion! When it comes to welding, safety is paramount. A high-quality welding helmet is not just a piece of equipment; it's a shield that protects welders from sparks, ultraviolet, and infrared light during the welding process. That's why we've created the Premium All-Function Welding Helmet Series - a state-of-the-art auto-tinting helmet that blends top-notch protection with hands-free ease of use. Experience True Protection - Auto-Tinting Technology: Our Premium All-Function Welding Helmet Series features auto-tinting technology that takes your safety to a whole new level. The photosensitive filter in the helmet automatically adjusts the viewing area to a pre-set shade before the light hits your eyes, offering instant protection. When your weld is complete, the viewing area "un-tints," allowing you to inspect your work without lifting the mask. This innovative design not only protects your eyes but also increases detection time, ensuring you weld with confidence. What Sets Us Apart - Top-Quality Features: When it comes to a high-quality welding helmet, we don't compromise. Here's what makes our Premium All-Function Welding Helmet Series stand out: 1. Lightning Fast Detection: With a detection time (tinting speed) of at least 1/20,000 of a second, your eyes are always shielded promptly. 2. Enhanced Protection: Equipped with four photo-sensitive sensors, our helmet guarantees maximum efficiency and exceptional protection. 3. Versatile Shade Settings: The helmet offers multiple shade settings, allowing you to use it for all welding processes in various light conditions. 4. Wide Viewing Area: The large viewing area ensures ease of use even in confined spaces, giving you an unobstructed view of your work. 5. Featherweight Design: We've crafted our helmet with a lightweight design to reduce neck fatigue during prolonged use, keeping you comfortable and focused. 6. Reliable Power: The solar cell, combined with two replaceable CR2032 lithium batteries, ensures your helmet never runs out of juice. Our Premium All-Function Welding Helmet Series goes above and beyond to deliver top-tier features: • Infinitely adjustable sensitivity control for personalized protection. • Constant UV/IR protection with Shade DIN16 at all times. • External dark to light delay adjustment from 0.1 to 1.0 seconds. • Low amperage TIG welding compatibility for added versatility. • Grinding function and low volume alarm for added convenience. • Superior optical clarity for crystal-clear vision during welding. • ADF self-check ensures the helmet's integrity before use. Built to Last - Certified Excellence: At Canaweld, we take quality seriously. Our Premium All-Function Welding Helmet Series complies with CAN/CSA Z94.3 – 07 (R2014) standards, ensuring you get a product that meets the highest safety and performance requirements. Elevate Your Welding Experience - Choose Canaweld's Premium All-Function Welding Helmet Series! View Details

Special Function Pulling Tools

CNG Virtual Pipeline

Lovat Gas Solutions: Your Trusted Partner for CNG Virtual Pipelines At Lovat Gas Solutions, we are driven by our commitment to finding the right solutions for our customers, no matter the size or complexity of the problem. We take great pride in our ability to work closely with you to understand your unique needs and deliver the most suitable CNG (compressed natural gas) solutions available in the industry. When it comes to your CNG requirements, our experienced team is fully prepared to meet your needs. Whether you are facing a planned outage or an emergency situation, we are here to provide a quick and efficient solution. With a single phone call, you can rely on our responsive and reliable professionals to swiftly address your CNG challenges. Why choose Lovat Gas Solutions for your CNG needs? 1. Customer-Centric Approach: We prioritize working hand in hand with our customers to identify the most appropriate solution for their specific requirements. Your satisfaction is our top priority, and we go above and beyond to ensure that our services align with your expectations. 2. Comprehensive CNG Expertise: Our team is equipped with extensive knowledge and expertise in the field of CNG. We stay up-to-date with the latest industry trends and advancements, allowing us to provide you with innovative and effective solutions. 3. Responsive and Reliable Service: Time is of the essence when it comes to CNG outages or emergencies. You can count on us to promptly address your needs and provide a quick solution. Our reliable professionals are committed to minimizing downtime and ensuring the smooth operation of your business. 4. Tailored Solutions: We understand that every CNG situation is unique, and we believe in offering customized solutions. By carefully assessing your requirements, we can develop a solution that is perfectly tailored to your specific needs, ensuring optimal results. Partner with Lovat Gas Solutions today and experience the difference of working with a company that puts your needs first. Whether you are facing a planned outage or an unexpected emergency, our team is ready to provide you with responsive, reliable, and effective CNG solutions. Contact us now and let us help you overcome your CNG challenges, no matter the size or complexity. Together, we will find the perfect solution for your CNG needs. View Details

Utility Backup Operators

6 5/8" HP-6 Hydraulic Set High Angle Production Packer for 20-24 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

ROV Lift Points

Poseidon Robotics' Custom Lift Points: Unparalleled Strength for Your Subsea Lifting Needs When it comes to subsea operations, lifting heavy loads with precision and safety is a paramount concern. At Poseidon Robotics, we are proud to introduce our state-of-the-art Custom Lift Points—a breakthrough in subsea lifting technology. Engineered for exceptional strength and load-bearing capabilities, our Custom Lift Points are built to withstand the most challenging underwater lifting tasks. Strength Meets Customization At Poseidon Robotics, we understand that no two subsea projects are the same. That's why our Custom Lift Points are designed with versatility and customization in mind. We work closely with you to tailor our lift points to your specific requirements, ensuring that they seamlessly integrate with your subsea equipment, ROVs, or other subsea systems. Load Tested to Perfection Safety is at the core of everything we do at Poseidon Robotics. Our Custom Lift Points undergo rigorous load testing to ensure they exceed industry standards and can handle immense weights with ease. Rest assured that our lift points are reliable and dependable, giving you peace of mind during critical lifting operations. A Robust Solution for All Environments Subsea environments can be harsh and unforgiving, but our Custom Lift Points are up to the challenge. Crafted from high-quality materials, our lift points offer excellent corrosion resistance, making them suitable for prolonged underwater use without compromising on strength and performance. Versatility and Adaptability Whether you're dealing with offshore installations, subsea construction, or scientific research, our Custom Lift Points adapt to diverse applications. Their flexible design allows for easy integration into various subsea equipment and systems, giving you the freedom to tackle a wide range of projects efficiently. A Commitment to Excellence Poseidon Robotics takes pride in our commitment to excellence. Our team of experienced engineers and technicians ensures that each Custom Lift Point is meticulously crafted to meet the highest standards of quality and reliability. We leave no stone unturned in delivering lifting solutions that empower your subsea operations. Experience the Power of Poseidon Robotics' Custom Lift Points Embrace a new era of subsea lifting with Poseidon Robotics' Custom Lift Points. With unbeatable strength, unmatched customization, and unwavering safety, our lift points redefine what's possible beneath the waves. Join the Poseidon Robotics Revolution Unlock the potential of your subsea projects with Poseidon Robotics as your trusted partner. Our Custom Lift Points, load tested to an astounding 55,000 lbs, are here to elevate your subsea lifting capabilities to new heights. Discover the Future of Subsea Lifting Take the next step in your subsea journey with Poseidon Robotics. Contact us today to explore the possibilities of our Custom Lift Points and embark on a transformative subsea lifting experience. At Poseidon Robotics, we lift the world below the surface. View Details

Double Block & Bleed Valve – Flange x Thread – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block and Bleed Valve with Flange x Thread connections and Ball x Ball isolation with Needle Drain is a compact assembly designed to provide dual isolation in oil and gas systems. The two ball valves ensure reliable upstream and downstream shutoff, while the needle drain allows controlled venting, sampling, or pressure release between the isolation points. This design reduces the number of flanged joints and potential leak paths, improving safety and reliability in instrument and process applications.

The valve is available in sizes from ½ inch to 2 inch and pressure classes from 150 to 2500, making it suitable for a wide range of process conditions. It can be manufactured in various materials including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel, and can be supplied to meet NACE MR-01-75 requirements. The assembly is built to recognized standards including ASME B16.34, API 6D, and ISO 17292 and is tested to ensure proper operation, minimal leakage, and long service life.

This valve is ideal for instrument isolation, gauge protection, chemical injection, sampling connections, and other applications where safe and reliable dual isolation is required. Its compact and integrated design reduces installation complexity, simplifies system layout, and provides a safer and more efficient solution compared to assembling individual valves.

View Details

Needle Valves Hex Body Series – Female x Female – 1/4", 3/8”, 1/2”, 3/4", 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

Hex Body Needle Valves Female x Female are precision valves designed for accurate flow control and isolation in piping systems. The hexagonal body allows for easy installation and secure tightening using a standard wrench. Both ends have female threads, enabling direct connection to male-threaded pipes or fittings without additional adapters.

These valves are suitable for high-pressure and high-temperature applications, with a standard working pressure of 6000 psi and temperature ratings from -50°C to 230°C, extendable up to 500°C with graphite. They are commonly used in oil and gas, instrumentation, and process control systems to regulate fluid or gas flow, perform system bleed operations, or isolate sections of a pipeline.

The valves feature a metal-to-metal body and bonnet seal for durability, a self-centering non-rotating stem tip for consistent shutoff, and packing located below the threads to prevent process media from reaching the threads. Factory-tested for seat and packing leakage, these valves provide reliable, leak-free performance in demanding environments.

View Details