The Needle Valves Integral Bonnet Series – Male x Female is designed for reliable and precise flow control in industrial applications, particularly in oil and gas. Its integral bonnet construction means the body and bonnet are a single piece, eliminating welds and enhancing overall strength, safety, and durability. This design ensures consistent performance under high-pressure conditions and reduces the risk of leakage or mechanical failure.

The Male x Female configuration allows for straightforward installation into piping systems, with the male end threading securely into a female port. This connection type is widely used in process lines, instrumentation, and control systems where accurate flow adjustment, isolation, or sampling is required.

These valves feature a removable T-handle for easy actuation with low torque, rolled stem threads for smooth operation and long service life, and fully supported packing to minimize maintenance. A self-centering, non-rotating stem tip ensures bubble-tight shutoff, while the mirror-finished stem reduces wear on packing and facilitates smooth operation. Optional stellite-tipped stems are available for applications involving abrasive or corrosive fluids, further extending the valve’s lifespan.

This series is ideal for applications requiring precise flow control, reliable sealing, and long-term durability in harsh environments such as high-pressure oil and gas systems, chemical process lines, and instrumentation panels.

Integral Bonnet Tube OD needle valves feature a one-piece construction where the bonnet is integrated with the valve body, eliminating welded joints and providing enhanced strength and safety. This design ensures durability and reliable performance in high-pressure applications, minimizing the risk of leaks or failures.

The Tube OD connections allow secure attachment to tubing while providing precise flow control, making these valves ideal for instrumentation lines, pressure measurement, and process control systems. The design supports consistent, repeatable shut-off and smooth operation, even under demanding conditions.

These valves are particularly suitable for oil and gas applications where high-pressure resistance, leak-free performance, and ease of maintenance are critical. Additional features such as rolled stem threads and mirror-finished stems reduce wear, lower operating torque, and extend service life, ensuring dependable operation in both standard and critical environments.

The Gauge Root Valve Female x Female 1/4” NPT is a small but essential valve used to protect and control pressure instruments, like gauges and transmitters, in fluid or gas systems. Its female x female connection allows it to connect directly to two male-threaded fittings, making installation simple and reducing the risk of leaks.

This valve can handle pressures up to 6000 PSI and operates safely across a wide temperature range. The internal stem is designed with a back seat and the packing is placed below the threads, keeping the threads protected from the process media. A self-centering, non-rotating tip ensures a tight seal every time, preventing leaks.

It also features a removable “T” handle for easy turning with low effort, smooth rolled threads for long-lasting use, and a dust cap to prevent dirt or debris from entering the valve. Each valve is factory tested with nitrogen at 1000 PSI to ensure it seals correctly and operates reliably. This type of valve is ideal for isolating and protecting pressure instruments in chemical, oil and gas, and industrial processes.

The Ball Valve Lever Operated – 2-Way (Male × Female) is an isolation valve used to start, stop, or regulate fluid flow in oil and gas piping systems. Its 2-way design provides simple, reliable flow control, making it ideal for applications where full shut-off or bi-directional flow is required, such as upstream production lines, downstream processing, pipeline distribution, and injection systems.

The valve features a floating ball design for seat wear compensation and leak-proof performance under high-pressure conditions. It is manufactured and tested to ASME B16.34, meets ASME B31.3 pressure-temperature ratings, and is type-tested to MSS-SP-99. It supports bi-directional flow with a standard working pressure of 6000 psi (maximum 10000 psi on request) and a temperature range of –40 °F to 450 °F (–40 °C to 232 °C).

It operates via a quarter-turn lever with low torque. The stem is internally loaded with a shoulder to prevent blowout. Replaceable seats and packings extend service life, and the maximum orifice minimizes pressure drop. The valve is factory tested with nitrogen gas at 1000 psig (maximum leak rate 0.1 sec/min). Optional tests include vibration, temperature, and helium. It can also meet NACE MR0175 standards and fire-safe requirements, with heat code traceability for all components.

In conclusion, this 2-way ball valve provides reliable, leak-proof isolation for critical oil and gas operations, combining robust construction, high-pressure capability, and ease of operation to ensure safe and efficient flow control across the system.

This 2-way panel-mounted ball valve with male x female connections is designed to control, start, or stop fluid flow in oil and gas piping systems. Its 2-way configuration allows fluid to flow in either direction between two ports, providing reliable on/off operation for pipelines, sampling lines, injection systems, or process bypasses.

The male x female connections allow secure inline installation and easy integration into existing piping without requiring additional fittings. The panel-mounted design enables operation from a control panel, making it suitable for systems where multiple valves need centralized access or where physical access to the pipeline is limited.

The valve features a floating ball design for leak-proof shut-off under high-pressure conditions. Operation is simple with a quarter-turn handle that provides fast, low-torque control. The three-piece construction allows easy installation and maintenance, including replacement of internal components. Factory testing ensures seat and stem integrity, and the valve is available in a range of corrosion-resistant materials, including SS 316, SS 316L, Duplex, Super Duplex, Hastelloy, Inconel, and Monel. Optional compliance with NACE MR0175 and fire-safe designs makes it suitable for demanding industrial environments.

The Check Valve Poppet Type with 1/4" NPT tube ends is a compact, high-performance valve designed to provide reliable one-way flow control in hydraulic and pneumatic systems. Built for demanding applications, this valve is rated up to 6000 PSI working pressure, making it suitable for both high-pressure and industrial environments.

The poppet design ensures a tight seal when backflow occurs, preventing fluid from moving in the reverse direction while allowing free flow in the intended direction. This not only protects sensitive system components but also maintains system efficiency by eliminating leakage.

With a cracking pressure typically available from 1 to 25 psi, the valve can be selected to suit specific operational needs, ensuring smooth opening without unnecessary resistance. The female NPT tube end connection provides a secure, leak-free fit, compatible with a wide range of standard piping and tubing systems. Constructed from durable stainless steel or carbon steel depending on configuration, the valve offers excellent resistance to wear, corrosion, and high-pressure fatigue.

Commonly used in oil and gas, the poppet-type check valve provides consistent performance, low maintenance requirements, and long service life.

Its simple yet effective design ensures operators can trust it in critical applications where preventing reverse flow is essential for safety and operational reliability.

The Ball Valve Lever Operated – 2-Way Female × Female is a high-performance isolation valve designed for oil and gas piping systems where reliable flow control is essential.

Its female × female connections allow for secure inline installation directly onto male-threaded pipes or fittings, simplifying assembly, reducing the need for additional adapters, and minimizing potential leak points. This configuration is particularly useful in production lines, injection lines, sampling lines, and other pipelines with male-threaded ends.

The valve features a floating ball design that provides seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions. Operation is simple and efficient with a quarter-turn lever, allowing fast opening and closing with low torque. The internally loaded stem with shoulder prevents blowout, enhancing operational safety, while replaceable seats and packings extend service life. The maximum orifice design also minimizes pressure drop across the valve.

This valve is suitable for a wide range of oil and gas applications, including upstream, midstream, and downstream pipelines. It is factory tested to ensure leak-proof performance and can be supplied to meet NACE MR0175 standards and fire-safe requirements. Heat code traceability ensures quality and material verification for all components, making this valve a dependable and durable solution for industrial environments.

The Monoflange SBB Double Block and Bleed Valve with Flange x Thread connections features an OS&Y isolation valve and a needle drain, providing dual isolation in a single compact assembly. It is designed for oil and gas applications where safe venting of trapped pressure between isolation points is required, such as instrument or gauge isolation, chemical injection, and sampling lines.

The valve’s monoflange design integrates both isolation and venting functions in one unit, reducing the number of joints and potential leak paths while saving space and simplifying installation. The OS&Y isolation valve offers clear visual indication of open or closed status, allowing operators to quickly verify valve position. The needle drain provides controlled venting of pressure trapped between the isolation points, ensuring safe operation during maintenance or sampling procedures.

The valve is suitable for flange sizes from 1/2” to 2” and pressure classes from 150 to 2500, with options for reduced or full bore depending on process requirements. It is available in a variety of materials including stainless steel 316, 316L, duplex, super duplex, Hastelloy, Inconel, and Monel, and can be manufactured to meet NACE MR-0175 standards. The design complies with recognized standards such as ASME B16.34, API 6D, and ISO 17292, and is tested to low emission requirements.

This configuration is ideal for oil and gas operations requiring reliable dual isolation, precise venting, and compact installation in critical piping systems.

The Ball Valve Lever Operated 3-Way Female × Female Side Entry is a high-performance valve designed to control or divert fluid flow in oil and gas piping systems. Its 3-way configuration allows flow to be directed between multiple pipelines, making it ideal for applications such as flow diversion, sampling lines, injection systems, or process line bypasses.

The valve supports split flow and is suitable for pressures up to 6000 PSI (maximum 10000 PSI on request) and temperatures from –40 °F to 450 °F (–40 °C to 232 °C).

The female × female connections enable secure inline installation without the need for male fittings, simplifying assembly and reducing potential leak points. The valve features a floating ball design for seat wear compensation, ensuring consistent, leak-proof shut-off under high-pressure conditions.

It is manufactured and tested to ASME B16.34 standards, pressure-temperature rated to ASME B31.3, and type-tested to MSS-SP-99, providing verified performance and reliability in industrial environments.

Operation is efficient and reliable with a quarter-turn lever, allowing fast control with low torque. The internally loaded stem with shoulder prevents blowout, enhancing safety, while replaceable seats and packings extend service life. Fire-safe designs and optional compliance with NACE MR0175 standards are available, and heat code traceability ensures material verification.

Built for demanding industrial environments, the valve is suitable for a wide range of oil and gas applications where flow control, diversion, and durability are critical.

The Tube Fittings Male Elbow NPT is a mechanical fitting that provides a 90° connection between tubing and components with National Pipe Taper (NPT) threads. It is designed for use in high-pressure systems with operating pressures up to 6000 PSI.

The elbow configuration allows tubing runs to change direction while maintaining a sealed joint. Threads are tapered in accordance with NPT standards to create a pressure-tight seal when properly installed.

These fittings are produced in a range of sizes from 1/4” to 1” and are manufactured in line with ASME B16.34, MSS-SP-99, and ASME B31.3 requirements. Typical applications include oil, gas, and industrial process systems where tubing must be connected to threaded equipment or piping at an angle.