Ballycatter.ca - Industrial Equipment

Our pump skids can be used both onshore and offshore to support a variety of activities in the oil and gas industry. Continuous or standby duty, these units are highly reliable and easy to operate. Clients use our pump skids multiple uses including; corrosion inhibition, wax inhibition, scale inhibition, hydrate removal, flocculent removal, sulphate removal, glycol injection, methanol injection, PH control, H2S scavenger injection, water chemistry adjustments, Nitrate injection, and more. These skids are rated for offshore and onshore use and can be custom ordered for your specific needs. View Details

Tubing End Locator

Streamline Your Downhole Operations with HOCA Oil Tools' Tubing End Locator In the evolving landscape of the oil and gas industry, precision and efficiency are paramount. As specialists in downhole slick line tools, HOCA Oil Tools is proud to present our Tubing End Locator, a precision-engineered tool designed to enhance the effectiveness and efficiency of downhole operations. Understanding the critical nature of accurate well measurements and operations, our Tubing End Locator stands out as a must-have tool for any downhole toolkit. HOCA's Tubing End Locator: Precision Engineered for Optimal Efficiency The HOCA Tubing End Locator is specifically designed to accurately identify the end of the tubing in wellbores, a crucial step in various downhole operations. Built with high-grade materials and engineered to withstand harsh downhole environments, our Tubing End Locator ensures reliable performance and precise measurements, aiding operators in conducting seamless downhole interventions and maintenance. Experience the HOCA Difference in Downhole Innovation At HOCA Oil Tools, we are committed to driving innovation and excellence in the oil and gas industry. Our Tubing End Locator exemplifies this commitment, providing operators with a reliable, accurate, and efficient tool that streamlines downhole operations and enhances well integrity. Integrating our Tubing End Locator into your downhole operations not only signifies a commitment to accuracy and efficiency but also positions your operations at the forefront of technological advancement. With HOCA Oil Tools, you gain more than just a product; you acquire a partner dedicated to supporting your operational success with cutting-edge solutions and expert service. Choose HOCA Oil Tools' Tubing End Locator for your downhole needs and join the ranks of satisfied clients who trust our products to deliver unmatched performance and results. Elevate your downhole operations with HOCA Oil Tools – where innovation meets precision and efficiency. View Details

U-KWIK Cross Coupling Protector

Tracked-hoe Excavator of various sizes and brands available to fit your needs

Excavators contain four major pieces - a boom, dipper, bucket, and cab, all of which are located on a rotating platform known as the house. Excavators are versatile pieces of equipment that can be used in the following applications (to name just a few); Digging trenches, holes, and foundations Demolition with hydraulic claws, cutters, and breaker attachments Mining, especially, but not only open-pit mining Driving piles, in conjunction with a pile driver Dredging rivers Drilling shafts and rock blasting Snow removal with snowplow and snow blower attachments Forestry mulching Handling materials Brush cutting with saws and mower attachments General landscaping Forestry work Construction View Details

Perforating

Optimizing Reservoir Connectivity with InWaTec Combined's Precision Perforating Services In the intricate execution of oil and gas production, establishing a seamless flow path between the reservoir and the wellbore is vital for optimal extraction. At InWaTec Combined, we specialize in precision Perforating Services, a critical step towards ensuring that our clients’ wells are prolific producers. Perforating is a sophisticated process, and its execution is both an art and a science. It involves the precise creation of holes from the wellbore through the casing and cement sheath directly into the producing zone. This process is not merely about making openings; it's about strategically placing them to maximize flow rates and enhance the recovery of hydrocarbons. Our approach to perforating is methodical and tailored. We begin with an in-depth analysis of the well conditions and reservoir characteristics. This data informs our selection of perforating techniques, which range from the conventional to the cutting-edge, including shaped charges and advanced explosive materials that create clean, deep perforations with minimal damage to the formation. InWaTec Combined’s Perforating Services are about more than just punching holes; they are about delivering a highly controlled and effective conduit for hydrocarbons to travel from the reservoir to the surface. With our state-of-the-art technology and expertly engineered charges, we can ensure that the flow path is not just established, but optimized for the specific conditions of each well. Safety and precision are at the heart of our operations. We employ the latest in downhole technology, including real-time monitoring and electric line conveyance, to ensure that our perforations are executed with the highest degree of accuracy and control. This commitment to excellence and attention to detail is why InWaTec Combined is a leader in the field. By entrusting InWaTec Combined with your perforating needs, you are not just choosing a service provider—you are choosing a partner dedicated to enhancing the productivity of your wells. Our Perforating Services are integral to preparing your wellbore to be a strong link between the hidden riches of the reservoir and the energy needs of the world. Let us bring our expertise and precision to bear on your operations, and together, we can unlock the full potential of your assets. View Details

HP-3 Hydraulic Set High Angle 7" 29-32 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

2-1/2 inch Ambient Valve

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

9 5/8" HP-6 Hydraulic Set High Angle Production Packer for 47-53.5 PPF Casing

Ballycatter HP-6 High Angle Production Packer

Available sizes: 4 1/2”, 5”, 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-6 is a compact, hydraulically set production packer designed for low to medium-pressure applications in high-angle and horizontal wells. With a short body length and no tubing movement required for setting, the HP-6 is ideally suited for tight-radius deviations, stacked completions, and coiled tubing operations.

It can be run in single or multiple packer installations with sequential setting in a single trip, reducing rig time and complexity.

Rated to 7,500 psi and tested in Q125 casing, the HP-6 features a straight-pull release mechanism that is fully isolated from hydraulic pressure, allowing low shear-out force even under full differential pressure.

Built-in bypass ports equalize pressure during retrieval, ensuring smooth release and reducing swab risk. The tool can be set using rig pumps, and its economical design allows for easy redress and reuse. Optional rotational release is available for added flexibility in challenging retrieval scenarios.

Engineered with materials and elastomers for hostile environments, the HP-6 delivers dependable performance in offshore operations, high-angle wells, and cost-sensitive completions requiring reliability without unnecessary complexity.

View Details

Double Insulated AWG 2/0 Cable

Unleash the Power of Precision Welding with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2)! In the oil and gas industry, precision welding is not just a necessity; it's an art. At Canaweld, we understand the critical role that welding plays in your projects, and that's why we offer the highest quality welding accessories to empower you with exceptional performance. Our Welding Cable Double Insulated AWG 2/0 (67.4 mm2) is a testament to our commitment to excellence and innovation. Unparalleled Quality and Performance: Crafted with utmost precision, our welding cables are double insulated and made from 100% pure copper. The Rope Lay Class K Stranded Soft Drawn Bare Copper Conductor per ASTM B-172 ensures outstanding conductivity, allowing you to achieve precise welds with ease and confidence. Built for Safety: Safety is paramount in welding operations, and our welding cables are designed with this principle in mind. With a nominal voltage of up to 600 V and a test voltage of 3000 V, our cables offer robust insulation, safeguarding you from potential hazards during welding tasks. Unrivaled Durability: The oil and gas industry demands cables that can withstand the harshest conditions. Our welding cables are engineered to be highly resistant to cuts, tears, and abrasions, ensuring they can handle the toughest challenges with ease. They are also built to resist oil, solvents, and chemicals, providing unparalleled durability in even the most demanding environments. Flexibility Redefined: Navigate through complex welding setups effortlessly with our welding cables' remarkable flexibility. With a minimum bending radius of 4 times the cable diameter, you can work in confined spaces and challenging angles without any hindrance. Environmental Responsibility: At Canaweld, we take our environmental responsibility seriously. Our welding cables are RoHS compliant, adhering to strict environmental standards and being free from harmful substances. When you choose Canaweld, you are not just investing in top-tier welding accessories but also contributing to a cleaner, greener world. Elevate Your Welding Experience: Experience the difference with Canaweld's Welding Cable Double Insulated AWG 2/0 (67.4 mm2). Unleash the power of precision welding and take your oil and gas projects to new heights of success. Trust in Canaweld's expertise and dedication to deliver premium welding accessories that redefine excellence in the industry. When it comes to welding, choose Canaweld for the ultimate in quality, safety, and performance. Your welding projects deserve nothing but the best, and that's precisely what Canaweld delivers. View Details

MIG/Stick 202 Welding machine

Introducing the MIG/STICK 202: Your Versatile Welding Companion for Oil and Gas Industry When it comes to MIG welding machines that deliver unmatched performance and precision, Canaweld is the name you can trust. Our high-performance MIG welders are designed to tackle the toughest welding jobs in the oil and gas industry, offering a wide range of durable MIG welders, industrial heavy-duty MIG welders, high-tech MIG pulse welders, and portable MIG welders to suit your needs. The Ultimate Welding Solution Canaweld MIG welding machines are not just powerful; they are versatile too. Whether you need to perform Flux-cored or Flux-cored gasless welding or MIG Brazing, our machines have got you covered. Designed for speed, ease of use, and cost savings, our MIG welders are engineered to handle various materials, including mild steel, stainless steel, aluminum (with or without a spool gun), chrome molybdenum, titanium, and copper alloys. Precision and Durability in Every Weld The MIG/STICK 202 is the epitome of portability, power, and versatility in welding. This unit is capable of welding up to 3/8-inch steel in either MIG mode or SMAW setting, providing you with the flexibility to tackle light to medium-duty welding jobs effortlessly. With the ability to run 0.023–0.045-inch MIG wire or up to 3/16-inch SMAW rods with a stable arc, this welding machine delivers exceptional results with every weld. Outstanding Features to Boost Your Productivity At Canaweld, we prioritize your welding experience. That's why the MIG/STICK 202 is equipped with an array of features that set it apart from the rest: • High power output: Enjoy 170A @ 100% Duty Cycle & 200A @ 35% Duty Cycle, giving you the power you need for demanding welding tasks. • Tested for the toughest conditions: The machine has been rigorously tested in extreme temperatures of 104°F /40°C to ensure optimal performance in any environment. • Inverter power source: The MIG/STICK 202 boasts an inverter power source with optimal welding characteristics in both MIG and Stick modes. • Power fluctuations compensation: The automatic compensation for main power fluctuations within ± 20% ensures a stable and consistent welding process. • Long-distance welding capability: With the ability to use up to 165 feet (50 meters) leads without any power loss at the weld, you can tackle distant welding projects effortlessly. • Precise wire feed: The high-grade metal dual drive roll system ensures precise and constant wire feed, preventing bird nesting and improving efficiency. • Wide welding range: Weld up to 3/8” steel and aluminum with ease, making it suitable for a wide range of applications. • Graduated knob for accuracy: Achieve the most accurate settings with the graduated knob, giving you full control over your welding process. • Stable arc with minimal spatter: The MIG/STICK 202 automatically controls wire speed by voltage feedback, resulting in an extremely stable arc with minimal spatter. • Reliable cooling and protection: Fan-cooled and thermally protected against overheating, this welding machine ensures longevity and durability. • Built-in polarity changeover: Easily switch between common gas and gasless wires with the built-in polarity changeover feature. • User-friendly design: The metal face panel adds durability, while the spool gun compatibility and support for both 8 and 12-inch wire spool sizes enhance convenience. • Comprehensive warranty: Enjoy peace of mind with our comprehensive 3-year warranty, knowing that your investment is protected. Experience Welding Excellence with Canaweld When it comes to welding machines for the oil and gas industry, Canaweld delivers superior performance, precision, and durability. Invest in the MIG/STICK 202 and take your welding capabilities to new heights. With Canaweld's commitment to quality and customer satisfaction, you're choosing a welding companion that will exceed your expectations. Unlock your welding potential with Canaweld. Experience the future of welding technology and achieve exceptional results with the MIG/STICK 202. View Details

Pipe Fittings Hex Couplings – Female NPT – 1/8", 1/4", 3/8", 1/2", 3/4”, 1” – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

Hex Couplings Female NPT are pipe fittings designed to join two male threaded pipes in fluid and gas systems. The female NPT threads provide a tight seal when screwed onto male pipes, ensuring leak-resistant connections. The hexagonal shape allows easy tightening or removal using a wrench, making installation straightforward even in compact spaces.

These fittings are commonly used in oil and gas and process control applications. They are suitable for high-pressure systems, with pressure ratings up to 10000 PSI depending on the material. Hex couplings are available in stainless steel, brass, and carbon steel, offering durability and corrosion resistance in demanding environments.

Sizes available range from 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, to 1”, providing flexibility for different piping setups. Their compact design and reliable performance make them ideal for instrumentation, process piping, and other applications where secure connections are essential.

View Details

FH Hydrostatic Retrievable Packer

The FH™ is the industry-standard, hydrostatic-set and shear-release single-string retrievable packer. It can be used in the following applications: production, injection, and zonal isolation; single-string selective completions or dual-string completions with multiple packers; deviated wells or other applications when rotation for installation or removal is not beneficial; when it is beneficial to displace and set packers after the well is flanged up; when testing the tubing string before packer setting or to independently set and test individual packers in multiple packer completions is beneficial. The FH packer is hydraulically activated by applying tubing pressure against a plugging device below the packer. The packer requires only straight pull to release. The FHL™ is the large-bore version of the FH packer. Features, advantages and operational procedures are the same as those for the FH packers Accessories A tubing-plugging device must be positioned below the packer for actuation: E™ hydraulic-trip sub (Product Family No. H79928); CMU(D)™ sliding sleeve (Product Family Nos. H81079 and H81080) with blanking plug; Baker Hughes low-control seating nipple with blanking plug; hydraulic-setting devices (Product Family Nos. H46921, H79928 and H75917) View Details

Subsea Transformer for ROV

Poseidon Robotics Introduces the Subsea Transformer: Taking Telemetry to New Depths In our unwavering commitment to advancing subsea robotics and ROV technology, Poseidon Robotics is thrilled to introduce our latest breakthrough: the Subsea Transformer. As part of our renowned Modular Telemetry System, this innovative subsea transformer assembly is set to redefine the capabilities of telemetry in deep-water operations. Unlocking New Possibilities At Poseidon Robotics, we understand the unique challenges faced by subsea professionals, and we continuously strive to provide solutions that exceed expectations. The Subsea Transformer is a testament to this dedication, offering a seamless integration of state-of-the-art components to empower your subsea missions. High Voltage Meets High Performance Designed with precision engineering and utilizing cutting-edge technology, our Subsea Transformer boasts a 3kV input and delivers an impressive 240VAC + HV motor output. This combination of high voltage and performance ensures efficient and reliable power distribution for your critical subsea operations. MacArtney Opto-Link Connectors The Subsea Transformer is equipped with MacArtney Opto-Link connectors, renowned for their robustness and reliability. These connectors ensure secure data transmission, minimizing the risk of signal loss and maintaining a seamless flow of information between your subsea equipment and surface systems. CWDM Technology To further optimize data transmission and maximize the potential of your subsea operations, our Subsea Transformer incorporates Coarse Wavelength Division Multiplexing (CWDM) technology. By enabling multiple signals to be transmitted over a single fiber optic cable, CWDM enhances the efficiency of your telemetry system, reducing cable requirements and streamlining your subsea setup. Unparalleled Integration The Subsea Transformer assembly is engineered to seamlessly integrate with our Modular Telemetry System, forming a powerful combination that is greater than the sum of its parts. This integration empowers you with a comprehensive telemetry solution, allowing you to focus on your subsea objectives without the distractions of technical complexities. Reliability and Performance You Can Trust When it comes to subsea operations, reliability is paramount. Poseidon Robotics has meticulously tested and validated the Subsea Transformer to ensure it performs flawlessly even in the harshest subsea environments. With our product, you can trust that your telemetry system will operate at peak performance, unleashing new possibilities for your subsea endeavors. Elevate Your Subsea Missions with Poseidon Robotics Discover a new era of subsea telemetry capabilities with Poseidon Robotics' Subsea Transformer. Whether you are exploring the depths of the ocean or conducting critical subsea inspections, our solution is here to support and enhance your operations. Contact Us Today To learn more about the Subsea Transformer and how it can elevate your subsea missions, contact Poseidon Robotics today. Our team of experts is eager to collaborate with you in shaping the future of subsea robotics and ROV technology. Embrace the power of innovation with Poseidon Robotics! View Details

Tubing Hanger Coupling - 4 ½” to 2 7/8”

The 4 ½ x 2 7/8” Tubing Hanger Coupling is a specialized connection component used in oil and gas wellhead systems to join two different sizes of upset tubing—4 ½-inch and 2 7/8-inch. This size combination is commonly selected when there is a need to transition from a wider tubing hanger profile to a smaller production string, without significantly restricting flow or compromising mechanical strength. The slightly larger 2 7/8” production tubing allows for greater internal flow area than smaller alternatives, making this configuration well-suited for completions that aim to support moderate to high production rates.

The coupling is designed with a union nut mechanism, which enables installation without rotating the Christmas tree or disturbing other surface equipment. This simplifies operations, especially in space-limited or sensitive surface environments. Both the top and bottom threads of the coupling can be manufactured to meet specific customer requirements, ensuring compatibility with a range of tubing string designs. Additionally, the coupling is threaded to accommodate a back pressure valve, offering an important safety feature by allowing well pressure to be managed during maintenance or pressure control procedures.

Constructed from high-grade steel and compliant with API standards, the 4 ½ x 2 7/8” Tubing Hanger Coupling offers high durability, corrosion resistance, and the mechanical integrity required for challenging downhole conditions. By supporting a secure, pressure-tight connection between tubing sizes, it plays a key role in maintaining well integrity and operational efficiency in various oil and gas production scenarios.

View Details

7" Mech-2 Double Grip Mechanical Set Packer for 20-26 PPF Casing

Ballycatter Mech-2 Double Grip Mechanical Packer

Available sizes: 5”, 5 1/2”, 6 5/8”, 7”, 9 5/8”, and 10 3/4”

The Ballycatter Mech-2 is a retrievable, compression-set double-grip mechanical packer designed for applications where pressure differentials from below are anticipated, such as combined stimulation and production operations. Featuring opposing slips above and below the packing element, the Mech-2 ensures secure bi-directional anchoring within the casing under varying well conditions.

The tool incorporates a built-in hydraulic hold-down system located beneath the face-seal bypass valve, enabling it to resist upward forces during stimulation treatments. A unique “Differential Lock” mechanism utilizes pressure from below the packer to actuate a balance sleeve, generating additional downward force that maintains bypass valve integrity and ensures a reliable seal.

The Mech-2 is mechanically set using a long-stroke mandrel and a J-slot mechanism. Once positioned, right-hand rotation and applied set-down weight close the bypass valve, engage both slip sets, and compress the sealing elements. The formation below the packer is then fully isolated and accessible only through the tubing. To retrieve, the tubing is raised the full packer length, automatically re-engaging the J-slot and reopening the bypass for pressure equalization and circulation.

With its dual-grip design, hydraulic hold-down, and controlled setting and release process, the Mech-2 offers a robust and dependable solution for demanding applications requiring secure annular isolation and enhanced downhole stability.

View Details

Dump Bailer Service

InWaTec Combined: Enhancing Well Intervention with Precision Dump Bailer Services In the world of well intervention, precision and reliability are paramount. InWaTec Combined is proud to introduce our Dump Bailer services—a cost-effective and efficient solution for transporting fluids to precise points within the wellbore. These services are essential for various applications, ensuring that operations are not only successful but also streamlined for maximum efficiency. Strategic Applications for Optimal Results Our Dump Bailer services are versatile, serving a range of critical applications: Cementing Operations: Deploying cement onto permanent plugs to secure well integrity is executed with precision, ensuring that the cement is placed exactly where it is needed. Acidizing: We specialize in depositing acid precisely at scale restrictions or on flow control items, which may be scaled up to restore functionality and enhance flow. These strategic applications are vital in extending the life of wells and restoring their optimal functionality. Features & Benefits: A Blend of Simplicity and Efficiency InWaTec Combined’s Dump Bailers are designed with the industry's needs in mind, and they come with a host of features and benefits: Standard Slickline Connections: Our dump bailers are equipped with industry-standard connections, ensuring compatibility with a wide range of toolstrings and ease of integration. Simple, Robust Design: Durability and ease of use are at the heart of our design philosophy, providing a tool that withstands the rigors of well operations while being user-friendly. Quick and Easy Field Redress: Time is of the essence in well operations, and our dump bailers are designed for rapid redress in the field, minimizing downtime. Modular Design Flexibility: We understand that well conditions vary, which is why we offer modular designs that allow for field changeable variations in length to suit any well's requirements. Customizable Burst Discs: With the ability to supply various burst discs, we tailor our tools to suit every unique application, ensuring that the operation is conducted with the right specifications for optimal results. Cost-Effectiveness: Our Dump Bailer services provide a cost-effective method for fluid transport within the wellbore, ensuring that budgetary constraints do not compromise well servicing operations. A Partner in Well Intervention At InWaTec Combined, we stand as your partner in well intervention. Our Dump Bailer running services are a testament to our commitment to providing solutions that are not just effective but also enhance the safety and efficacy of your well operations. Conclusion: Precision Fluid Deployment with InWaTec Combined In summary, InWaTec Combined's Dump Bailer services represent an essential component in the well servicing toolkit. With our focus on precision, ease of use, and cost-effectiveness, we ensure that your well intervention operations are performed with the highest standards of accuracy and efficiency. Choose InWaTec Combined for services that deliver where it counts—down the wellbore. View Details

StimStixx MatrixStixx

Introducing the Revolutionary MatrixStixx by StimStixx Technologies - Unleash the Power of Pinpoint Accuracy! Are you ready for a groundbreaking advancement in well treatment technology? Look no further than the MatrixStixx by StimStixx Technologies. Our specially formulated product is designed to deliver heated acid vapor with unparalleled precision, revolutionizing the way you approach well stimulation. With an outer dimension of 3.625 inches, our MatrixStixx is compatible with various conveyance methods, including slickline, wireline, coil tubing, and tractor conveyance. This versatility ensures that you can seamlessly integrate our solution into your existing operations, maximizing efficiency and minimizing downtime. The true power of our product lies in the highly reactive nature of the heated acid vapor it delivers. As it interacts with contaminants and carbonate scale, it penetrates with increased effectiveness and establishes optimal contact with the formation. This enhanced penetration translates to superior results, allowing you to unlock the full potential of your wells. But the benefits don't end there. The heated acid vapor, thanks to its high reactivity and relatively low volume, quickly vaporizes and becomes fully spent down-hole. This eliminates the need for post-treatment clean-up or disposal, reducing the risk of spills at the surface and ensuring a hassle-free operation. Experience the confidence of knowing that no contaminated effluent remains, enabling you to focus on what matters most - the success of your well stimulation. With the MatrixStixx by StimStixx Technologies, you can wave goodbye to costly and time-consuming post-treatment procedures. Join the ranks of forward-thinking industry leaders who trust StimStixx Technologies to deliver unrivaled accuracy, efficiency, and environmental responsibility. Elevate your well treatment to new heights with the MatrixStixx - the future of precision well stimulation is here. View Details

Surface Controlled Subsurface Safety Valve FXE 2-3/8 inch

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog. View Details

Newton Grabber ROV Manipulator

Unleash the Power of Precision: The Newton Grabber by Poseidon Robotics At Poseidon Robotics, we're dedicated to revolutionizing subsea exploration and robotics. Our commitment to innovation has led to the supply of cutting-edge products, and today, we're thrilled to introduce the Newton Grabber, a game-changer in the world of subsea robotics. A Seamless Solution for Enhanced Operations The Newton Grabber is engineered to elevate the capabilities of the BlueROV2 and other subsea vehicles by providing them with the ability to interact with the subsea environment like never before. Whether it's retrieving objects, attaching recovery lines, or freeing a snagged tether, the Newton Gripper delivers unmatched precision and performance, making it an invaluable tool for underwater missions. Intelligent Design: Functionality without Compromise One of the standout features of the Newton Grabber is its intelligent design that seamlessly integrates with your subsea operations. We understand that during certain missions, the grabber might be in the way. To address this, our innovative design allows you to hide the Newton Grabber inside the frame, under the buoyancy. No need for disconnection or removing valuable components; simply tuck it away and continue with your operation without interruption. Versatility at its Best The Newton Grabber is a versatile tool that suits a wide range of subsea applications. From delicate maneuvers to robust tasks, the grabber's capabilities adapt to the requirements of your mission. Its ability to retrieve objects and interact with the subsea environment opens up endless possibilities for scientific research, inspection, search and rescue operations, and more. Ease of Installation and Everything You Need Poseidon Robotics prioritizes simplicity and efficiency in every aspect, including installation. The Newton Grabber comes complete with everything needed for seamless installation on the BlueROV2. It has been meticulously designed the system to ensure a hassle-free integration process, allowing you to get your subsea vehicle up and running quickly. Experience Poseidon Robotics Quality As pioneers in subsea robotics, Poseidon Robotics consistently delivers products that redefine industry standards. The Newton Grabber is no exception, setting a new benchmark for performance, reliability, and versatility. Designed to endure the harshest underwater conditions, this grabber is engineered to withstand the demands of challenging subsea operations. Unlock New Possibilities with the Newton Grabber Are you ready to take your subsea operations to the next level? Unlock the full potential of your BlueROV2 or subsea vehicle with the Newton Grabber. Reach out to us today, and let our team of experts assist you in choosing the perfect solution for your specific needs. Experience the power of precision and elevate your subsea exploration with Poseidon Robotics. View Details

LM2500 Wrench for HPT Coupling Nut

The LM2500 Wrench – Horizontal/Vertical HPT Coupling Nut is a specialized maintenance tool designed for the LM2500 gas turbine engine. This wrench is used to install and remove the High Pressure Turbine (HPT) coupling nut, a critical component that secures the HPT rotor to the turbine shaft.

Removing and installing the coupling nut is necessary during major maintenance activities like rotor inspections, repairs, or when replacing key turbine components. Proper removal allows technicians to safely separate the rotor from the shaft, while correct installation ensures the rotor is securely fastened for reliable engine operation.

What makes this wrench stand out is its ability to work with both horizontal and vertical engine positions. This means technicians can use it easily no matter how the engine is set up, making maintenance simpler and more flexible.

Built to precise standards and made from tough materials, the wrench ensures the right amount of force is applied when tightening or loosening the coupling nut. This careful control helps protect the engine’s important parts from damage.

By using this wrench, maintenance teams can complete their work faster and with confidence, reducing downtime and keeping the turbine reliable. It’s an essential tool that supports the smooth operation of the LM2500 engine.

View Details

HDI V9000 Virtual Choke Console System

The HDI V9000 Virtual Choke Console System is a PLC-based control and monitoring platform that provides a digital representation of the traditional hydraulic choke console used in oil and gas operations. It integrates Human-Machine Interface (HMI) technology with electronic joysticks, enabling operators to monitor and control choke valves both locally and remotely.

This system supports flexible configurations to meet client requirements, including various console layouts and customizable language options. It is designed to interface not only with standard choke control components but also with additional monitoring equipment such as gate valve position indicators, mud gas separator pressure monitors, and environmental sensors for riser and sub-sea temperatures.

By digitizing choke control, the V9000 enhances operational oversight, allowing for precise valve positioning and real-time status feedback. Its modular architecture permits scalability and adaptation to complex wellsite setups, supporting improved safety and efficiency. The system\'s data logging and reporting features facilitate compliance tracking and operational analysis, making it a comprehensive solution for modern well control management.

View Details

Pipe Fittings Hex Nipples Male NPT – 1/16", 1/8", 1/4", 3/8", 1/2", 3/4", 1" – 10000 PSI – ASME B1.20.1 / SAE AS71051 / ISO 7-1 / ISO 228

The Hex Nipple Pipe Fitting with Male NPT threads is a precision component used to connect two female-threaded pipes or fittings in instrumentation and process control systems. The male tapered threads create a tight, leak-resistant seal when engaged with a corresponding female NPT connection, making it suitable for high-pressure and high-temperature applications commonly found in the oil and gas industry.

Manufactured from high-quality bar stock, the fitting provides strength and durability. Threads are capped and carefully packed to prevent damage during transport. The fitting is marked with the manufacturer’s name, size, material, and heat code for traceability. The design ensures proper thread engagement, reliable sealing, and smooth flow of fluids or gases.

These fittings meet or exceed ASME B1.20.1 standards for NPT threads and are rated according to ASME B31.3 for process piping, supporting safe and consistent operation in industrial environments. The male NPT design allows easy installation while maintaining a durable, leak-tight connection over the life of the system.

View Details

Gas Turbine LM2500+ DLE 50Hz 2x CC

The LM2500+ DLE 50Hz Combined Cycle 2x1 system combines two LM2500+ dry low emissions gas turbines, each coupled with a Heat Recovery Steam Generator (HRSG), to power a single steam turbine. This high-efficiency configuration is engineered to meet larger capacity needs, delivering reliable, low-emission power with rapid startup capability.

At the core of this system is the LM2500+, an uprated version of the LM2500, featuring a 17-stage compressor. The addition of a forward-stage blisk increases airflow by approximately 20% at full power. This enhancement boosts the compressor pressure ratio from 18:1 to 23.1:1, contributing to higher overall efficiency and output.

Downstream of the compressor, the engine incorporates a fully annular combustor with externally mounted fuel nozzles, a two-stage air-cooled high-pressure turbine driving the compressor and gearbox, and a six-stage low-pressure power turbine aerodynamically coupled to extract energy from the high-energy exhaust flow. To accommodate the increased output, key design changes were made to the power turbine, including aerodynamic blade optimizations and rotor strengthening.

The Dry Low Emissions (DLE) system plays a crucial role in minimizing environmental impact. Its triple annular combustor lowers flame temperature, reducing NOx and CO emissions without water or steam injection—improving both thermal efficiency and maintainability.

Together, this 2x1 configuration offers a scalable solution for utility and industrial operators seeking clean, efficient, and dependable power generation at higher capacities.

View Details

Pneumatic Spooling Unit

Spooling units designed to ensure cables or control lines are kept in tension while running in or out of hole. Our spooling units are fully designed, manufactured and assembled with sheaves (half or full moon) to guide control, injection, or mono-conductor cable preventing damage while being tripped in hole. Units are available in pneumatic, hydraulic, or electric drive and are ATEX zone and DNV certified as required by location. Spooling units can also be equipped with a filling pump to monitor pressure while tripping – improving efficiency as a sudden pressure drop indicates line damage. View Details

MC Injection Valve 1-1/2 inch

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer View Details

Fuel Nozzle for LM2500 Gas Turbine

The 2-cup Fuel Nozzle is a precision-engineered component used in gas turbines, specifically in the oil and gas industry. Its primary function is to inject liquid fuel into the combustion chamber in a fine, atomized spray, allowing for optimal mixing with air and efficient ignition. This ensures stable combustion, better fuel efficiency, and reduced emissions—key performance factors in industrial turbine applications.

The “2-cup” design refers to the nozzle’s dual flow passages, which help balance fuel distribution across the combustion zone. This promotes more uniform flame stability and lowers the risk of hot spots that can cause thermal stress to the turbine hardware. The nozzle is typically used on “base” engines and is suited for continuous-duty operations.

The L47197P05 variant is known for its compatibility with LM2500 turbine configurations and is built to endure harsh operating environments. It features durable materials and a design that withstands high temperatures and pressures commonly found in oil and gas turbine systems.

View Details

Injection Valve Subsurface Safety 4.48 inch

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog. View Details

ROV Surface Console

Hydraulic Set Large Bore Retrievable Production Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Slickline Swabbing Mandrel Assembly

Optimize Your Well Performance with HOCA Oil Tools' Swabbing Mandrel Assembly In the specialized field of downhole operations within the oil and gas industry, the demand for high-quality, efficient, and reliable tools has never been higher. At HOCA Oil Tools, we stand at the forefront of downhole innovation, providing our clients with advanced solutions designed to optimize well performance and enhance operational efficiency. One such innovation is our Swabbing Mandrel Assembly, a key component in maintaining well pressure and fluid levels. Introducing HOCA's Swabbing Mandrel Assembly: Precision and Efficiency Downhole The HOCA Swabbing Mandrel Assembly is engineered for optimal performance in fluid lifting and wellbore cleaning operations. Designed with the end-user in mind, our Swabbing Mandrels are built from high-grade materials to withstand the rigors of the downhole environment, ensuring durability and long-term service. Compatible with a variety of tubing sizes, our assemblies are tailored to meet the specific requirements of your well operations. Elevating Downhole Operations with HOCA Oil Tools At HOCA Oil Tools, we are committed to advancing the capabilities of the oil and gas industry through our innovative downhole solutions. Our Swabbing Mandrel Assembly is a testament to this commitment, offering a blend of precision, efficiency, and reliability that sets new standards for well performance and maintenance. Integrating HOCA’s Swabbing Mandrel Assembly into your downhole operations means investing in the future of your wells. Not only do our tools enhance operational efficiency, but they also contribute to the overall safety and sustainability of your operations. With HOCA, you're not just purchasing a tool; you're acquiring a partner in downhole success. Unlock the full potential of your downhole operations with HOCA Oil Tools. Experience unparalleled performance, efficiency, and reliability with our Swabbing Mandrel Assembly, and take the first step towards optimized well performance and operational excellence. Choose HOCA Oil Tools for your downhole needs and join the ranks of satisfied clients who have experienced the difference our solutions can make. Elevate your operations with the precision and quality of HOCA’s downhole solutions – where excellence meets innovation. View Details

ROV Communications Systems

Stay Connected with Poseidon Robotics' Advanced ROV Communications Systems In the dynamic world of subsea exploration and robotics, seamless communication is the key to success. At Poseidon Robotics, we understand the critical role that robust and reliable communication systems play in the success of your Remote Operated Vehicle (ROV) missions. That's why we are thrilled to introduce our state-of-the-art ROV Communications Systems, designed to keep you connected and informed throughout your underwater operations. A Complete Communication Solution Our ROV Communications Systems are more than just individual components – they are a complete and integrated solution. The system includes telemetry units, a cutting-edge 3kV step-down transformer, and a Coarse Wave Division Multiplexer (CWDM) assembly that seamlessly feeds them. These components are carefully installed as a system and are ready to be wired, ensuring a hassle-free setup process and maximum performance. Robust Telemetry Units The heart of our ROV Communications Systems lies in our advanced telemetry units. These units are built to withstand the harsh subsea environment and are tested rigorously to ensure top-notch performance. Equipped with multiple Ethernet, video, and serial connections, our telemetry units provide a robust communication interface for your ROV, enabling seamless data transfer, control, and feedback during your underwater missions. 3kV Step-Down Transformer and CWDM Assembly Our innovative 3kV step-down transformer is a key component of the communication system. It allows for efficient and safe voltage reduction, ensuring that your subsea equipment receives the power it needs without compromising safety. The Coarse Wave Division Multiplexer (CWDM) assembly further enhances the system's capabilities by providing high-speed optical communication links, allowing for increased data capacity and transmission rates. Reliable and Efficient Integration At Poseidon Robotics, we pride ourselves on delivering products that are not only technologically advanced but also user-friendly. Our ROV Communications Systems are pre-integrated and designed to seamlessly work together, saving you time and effort during installation and setup. With our system, you can rest assured that your ROV's communication infrastructure is optimized for performance and reliability. Unleash the Power of Communication Experience the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Whether you are conducting scientific research, performing subsea inspections, or engaging in search and rescue operations, our communication solutions will keep you connected, informed, and in control. Say goodbye to communication challenges and embrace a new level of efficiency and effectiveness in your underwater missions. Choose Poseidon Robotics With a legacy of excellence and innovation, Poseidon Robotics is your trusted partner in the subsea robotics industry. Our commitment to quality, reliability, and customer satisfaction drives us to deliver cutting-edge solutions that exceed expectations. Join the growing community of satisfied customers and elevate your ROV operations with Poseidon Robotics' advanced communication systems. Stay Connected, Stay Successful Don't let communication gaps hinder your subsea missions. Embrace the power of seamless communication with Poseidon Robotics' ROV Communications Systems. Contact us today to learn more about our products and how they can enhance your underwater operations. Stay connected, stay successful with Poseidon Robotics! View Details

T-CL Tubing Hanger

The T, T-CL, C-SRL-CL and CXS Tubing Hangers are all single completion, mandrel-type hangers for use in either the C Tubing Spool or the CD-2 Tubing Spool. T Tubing Hanger The T Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. Its flexible neck maintains the metal seal despite thermal or pressure cycling. T-CL Tubing Hanger The T-CL Tubing Hanger withstands stress of high pressure, corrosive/erosive elements associated with well flow. A control line exit block is available in either a bull plug style or block needle valve style. C-SRL-CL Tubing Hanger The C-SRL-CL Tubing Hanger incorporates a pressure energized SRL neck seal which accommodates vertical movement in the tubing hanger during BOP testing. A control line exit block is available in either a bull plug style or block needle valve style. The C-SRL-CL hanger should be used in 7-1/16” 10,000 psi Type C Tubing Spools. CXS Tubing Hanger The CXS Tubing Hanger includes two neck seals which may be used to isolate one control line. View Details

B-KWIK Control Line and Cable Protector

HP-1 Hydraulic Set 9 5/8 inch Packer

The HPL-1 Large Bore Hydraulic Set Retrievable Production Packer is a high-performance isolation toolactivated using tubing pressure, eliminating the need for mechanical manipulation. When pressure is applied against an underneath plugging device, the hydraulic setting mechanism engages, compressing the multiple packing element system to create a secure seal between the tubing and casing. Designed for versatility, the HPL-1 is available in 7” and 9 5/8” large bore options, making it ideal for high-volume production and injection applications. This design allows the packer to be set at any depth, making it particularly effective in low hydrostatic head wells while ensuring well integrity after the tubing is in place, even in large-diameter casing environments.

Once set, the double-grip system secures the packer in position using hydraulic hold-down pistons and a body lock ring, preventing unwanted movement due to pressure fluctuations or tubing expansion. Themechanically locked setting force ensures that reductions in bottom-hole pressure or tubing contraction do not weaken the seal, providing long-term reliability in production, injection, and zonal isolation applications. With the 7” and 9 5/8” options, the HP-1 is well-suited for high-flow rate completions, offering exceptional sealing performance and operational efficiency in larger casing sizes.

To retrieve the packer, operators can apply a straight upward pull, or, if equipped with the optional right-hand rotational release, use torque combined with a shear release mechanism. This flexibility allows for efficient removal in both standard and deviated wells, making the HP-1 packer a versatile, high-capacity solution for a wide range of completion designs, including large-bore well systems requiring robust isolation and retrieval capabilities.

View Details

Slickline Toolstring

Offshore Electric Line Services

Navigating the Depths: InWaTec Combined's Advanced Offshore E-Line Services In the challenging and complex world of offshore operations, precise and dependable wellbore data transmission is not just beneficial—it's crucial. At InWaTec Combined, our Offshore Electric Line (E-Line) services are the cornerstone of our well diagnostics and intervention solutions, designed to conquer the unique demands of the offshore environment. An E-Line, in its simplest form, is a robust electric cable. Yet, when deployed by InWaTec Combined, it becomes an integral part of offshore operations, a sophisticated tool that delves into the wellbore's mysterious realms. Our E-Line services excel in transmitting real-time data about the wellbore's conditions back to our offshore experts, ensuring that critical decisions are made with the utmost information at hand. Our E-Line's forte lies in its versatility and utility in conducting a plethora of logging activities essential for evaluating the well's integrity, formation properties, and hydrocarbon potential. These activities enable a comprehensive understanding of the well, providing insights necessary for optimizing production and ensuring the safety of offshore operations. The offshore environment poses unique challenges with its unpredictable nature and the sheer scale of operations. InWaTec Combined's E-Line services are designed to be resilient and adaptable, capable of withstanding the high pressures and corrosive elements found in the deep sea. Our commitment to innovation means that our E-Line technology is continuously evolving, pushing the boundaries of what is possible in offshore data gathering. By choosing InWaTec Combined's Offshore E-Line services, our clients receive more than just data—they gain a strategic advantage. With our advanced technology and expert analysis, we provide the insights necessary to maximize well performance, extend the life of offshore assets, and enhance the overall safety and efficiency of offshore operations. In an industry where the margin for error is slim and the consequences significant, InWaTec Combined stands as a beacon of reliability and excellence. Our Offshore E-Line services are not just a component of your operations—they are a pivotal part of your success story, deep beneath the waves. View Details

Structured Cabling

Structured Cabling by Nulux Network Solutions: The Bedrock of Your Resilient Network Infrastructure in the Oil and Gas Industry In the intricate and unrelenting realm of the oil and gas industry, the backbone of successful, uninterrupted operations rests on a sturdy network infrastructure. Not merely a conduit for communication, but a veritable lifeline that ensures every unit, every device, and every system communicates seamlessly, securing the continuous flow of vital data across every echelon of your business. This is where Nulux Network Solutions champions your endeavors through our unparalleled expertise in Structured Cabling. Nulux Network Solutions: Your Harbor in the Tempest of Network Demands Your venture into the industrious domains of energy extraction and refinement is formidable, laden with challenges that demand a network just as robust and reliable as the spirited teams operating within. Nulux, with a lauded heritage of over two decades, curates tailored copper cabling networks, ensuring that your network infrastructure stands unwavering amidst operational rigors. While our specialization permeates various strands of telecommunications and networking, structured cabling, particularly utilizing copper, becomes a focal point for businesses that demand: High-Bandwidth Transmission: Facilitating transmissions up to 10 Gbps, ensuring your data flows unrestrained. Reliability: A steadfast performance, ensuring your operations are never hampered by network downtimes. Cost-Effectiveness: A pragmatic solution that assures optimal performance without burdening operational costs. Copper Cabling by Nulux: The Confluence of Flexibility, Durability, and Affordability Structured cabling, particularly utilizing copper, furnishes your business with a network that is not just remarkably flexible, easily terminated, and reliable, but also phenomenally durable, ensuring that the infrastructure remains unfazed amidst the most demanding operational scenarios. Nulux enhances this inherent virtue of copper cabling by ensuring: Holistic Network Solutions: From the embryonic stages of design and planning to installation and life cycle support. Upgrades & Evolution: Ensuring your network is never obsolete, perpetually evolving in tandem with technological advancements. Tailored Solutions: Customizing solutions that cater explicitly to your voice, data, and video service requirements, ensuring no aspect of your operations is ever compromised. Immerse Your Operations in a Cocoon of Network Security and Reliability Navigating through the complexities of DCS network upgrades and deploying copper cabling systems, encompassing telephone, ethernet, coax, and hybrid networks, Nulux has not just crafted but meticulously refined our approach towards network solution delivery. Our commitment towards delivering high-quality, high-performance networks at affordable rates has been unwavering and resolute. Steer Your Business Towards Operational Excellence with Nulux Your business, deeply embedded in the vital sectors of energy, seeks more than just a service provider. It seeks a partner that comprehends the profundity of operational demands and curates solutions that are not merely effective but exemplary. Nulux Network Solutions invites you to experience a partnership where your network demands are met with solutions that are not merely about connectivity but about ensuring your operational pulse never falters. Reach out to us today, and let’s architect a network that becomes the silent, steadfast guardian of your operations, ensuring every bit of data traverses with reliability, every communication occurs seamlessly, and your business thrives amidst the operational challenges of the energy sector. View Details

Ambient Pressure SSSV 5-1/2

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Ambient Storm Choke Valve 4 1/2 inch

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue. View Details

Sabre Retrievable Packer

Baker Hughes introduces the SABRE™ mechanical-set retrievable packer. This packer is a single-string retrievable packer based on the proven performance and reliability of the Hornet packer. It is especially designed to perform reliably in standard-pressure injection and production applications. It is a tension set or compression set and can be landed in compression, tension, or a neutral condition. The SABRE provides reliable performance in a retrievable packer under combined conditions of 250°F (121.1°C) and 7,000 psi (482.6 bar) differential above or below the packer. We can source from current stock or direct from the manufacturer. View Details

2-7/8 inch SCSSSV Type NE

The NE™ tubing-retrievable safety valve (TRSV) is a single rod-piston non-elastomer flapper valve designed for general production with enhanced reliability and long life. The valve includes the non-elastomer hydraulic actuator design from the highly reliable SP™ line of safety valves. Along with the metal-to-metal (MTM) body joints and closure mechanism, the actuator places this valve in the premium category while keeping costs economical. The simple, compact design enhances the valve’s overall reliability and provides for trouble-free operation. Applications » General production completions » Hostile well environments incompatible with elastomers Features » Non-elastomer dynamic piston seals » Simple compact design » 100% MTM well containment in closed position » Positive debris barrier at both ends of flow tube » No construction seals used in the lockout and communication system » Unique flow tube construction prevents debris from settling on top of flow tube *information referenced from supplier catalog. View Details

HP-3 Hydraulic Set High Angle 5 1/2" 14-20 PPF Packer

Ballycatter HP-3 High Angle Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, and 9 5/8”

The Ballycatter HP-3 is a hydraulic-set packer engineered for high-angle and deviated well applications, where conventional mechanical or wireline-set tools are not feasible. This packer is particularly suited for single or multi-zone completions, offering flexible deployment in complex well trajectories.

Unlike mechanical systems, the HP-3 requires no tubing movement to set. This enables full well control throughout the operation, as the tubing can be landed and the wellhead installed prior to circulating or displacing fluids.

Key Features:

• Reliable Setting Mechanism: Utilizes dual balanced pistons—one actuates downward to anchor the bi-directional slips, while the other moves upward to compress a three-element packing system. This simultaneous action ensures a secure set and pack-off.

• Three-Element Seal: The packing system uses dual-durometer rubber elements to ensure long-term sealing integrity across a range of downhole conditions.

• Slips & Housing: One-piece, bi-directional slips are housed in a shear-pinned chamber, protected by a full-diameter guide to prevent damage during deployment.

• Release Options: Features a dual-method release system:

• Straight pull via shearing of pre-set screws.

• Right-hand rotation (approx. 8 turns), followed by straight pull.

• Equalization & Retrieval: Built-in equalizing valve opens automatically during release to balance pressures and enable safe retrieval. A large-diameter bypass within the mandrel allows fluid to flow during retrieval, reducing swab effects on the packing elements.

The HP-3 is engineered for reliability, operational flexibility, and full well control—making it a practical choice for complex wellbore geometries.

View Details

LM2500+G4 DLE U PT Gas Turbine

The LM2500+G4 DLE U PT is a versatile gas turbine designed for a wide range of applications, including onshore and offshore power generation, gas pipeline compression, and LNG compression. It features Dry Low Emissions (DLE) technology, which reduces nitrogen oxide (NOx) emissions to as low as 25 parts per million by volume (ppmv) at 15% oxygen, meeting stringent environmental standards.

In the oil and gas industry, production rates are closely linked to available horsepower. The LM2500+G4 DLE U PT offers higher power output, high reliability, and a lower initial cost per kilowatt, making it a cost-effective solution for energy-intensive operations.

This turbine has proven its capability to operate reliably in extreme ambient conditions, with running data demonstrating performance at temperatures as low as -50°F and start-up capability down to -40°F. This wide operational temperature range ensures dependable service in harsh environments.

Fuel flexibility is a key strength of the LM2500+G4 DLE U PT. It can seamlessly switch between various fuels—lean treated natural gas, rich offshore gas, propane, or diesel—without shutting down or losing efficiency. This flexibility supports energy security, allowing continuous operation even if the natural gas supply is interrupted. Additionally, the turbine can be adapted to burn alternative fuels like bioethanol and naphtha, further enhancing fuel options.

A notable advantage of aeroderivative gas turbines like the LM2500+G4 DLE U PT is their ability to operate on hydrogen blends, which produce no carbon emissions when combusted. Both new turbines and existing units can be converted for high hydrogen fuel use, supporting decarbonization goals.

Moreover, the LM2500+G4 DLE U PT is truly dual-fuel capable, able to switch from 100% natural gas to 100% propane without the need for pilot fuels. This contrasts with dual-fuel reciprocating engines, which typically require about 5% diesel during gas operation, increasing costs and emissions. The LM2500+G4 DLE U PT’s fuel flexibility, emission controls, and robust design make it a reliable and efficient choice for demanding mechanical drive and power generation needs in the oil and gas sector.

View Details

7" HP-5 Hydraulic Set Production Packer 32-35 PPF

Ballycatter HP-5 Production Packer

Available sizes: 5 1/2”, 6 5/8”, 7”, 7 5/8”, and 9 5/8”

The Ballycatter HP-5 is a hydraulically set, mechanically held, pressure-balanced production packer engineered for deep, high-pressure oil and gas applications. Designed to withstand bi-directional pressure differentials, it performs reliably in demanding environments such as deviated wells, stacked completions, and alternate zone installations. Its internal pressure balance system offsets downhole pressure fluctuations and reversals, maintaining integrity in the set position.

The HP-5 features upper and lower mechanical slips for secure engagement with casing under all well conditions, and its packing element system delivers a robust, pressure-enhanced seal. A unique body lock mechanism prevents pre-setting during deployment, keeping all components rigidly locked as a single unit while running in hole. This makes the HP-5 particularly effective in coiled tubing completions and high-angle installations.

The packer is released via a straight pull, with field-adjustable shear pins that are unaffected by differential pressure—allowing for flexible, operator-controlled release without tool disassembly.

Compatible with a wide range of packer accessories, the HP-5 combines reliability, operational control, and downhole adaptability in a single robust solution for production and injection applications.

View Details

Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain – 1/2” to 2” – Class 150 to 2500 – ASME B16.34 / API 6D / ISO 17292

The Double Block & Bleed Valve – Flange x Flange – Ball x Ball with Needle Drain is a high-performance isolation and venting solution designed specifically for oil and gas applications. This valve combines two independent ball isolation valves and a centrally located needle drain valve within a single, compact body, ensuring reliable double isolation and safe pressure relief or venting.

Manufactured in compliance with ASME B16.34, API 6D, and ISO 17292 standards, it offers assurance of global quality and safety benchmarks. The design accommodates line sizes ranging from ½” to 2”, with pressure ratings from Class 150 up to Class 2500, making it suitable for both standard and high-pressure operations.

The flange x flange connections provide secure installation and easy integration into piping systems, while the ball x ball configuration guarantees tight shut-off. The needle drain allows for controlled venting, sampling, or pressure equalization, enhancing operational safety and efficiency.

The valve is well-suited for critical applications such as pipeline isolation, meter calibration, instrumentation, and maintenance operations in oil and gas facilities. Its compact, space-saving design reduces potential leak paths compared to conventional multi-valve assemblies, lowering installation costs and improving reliability.

View Details

NWB-25 Charger

Maximize Your Mining Equipment's Performance with the Wisdom NWB-25A Charger from Provix Provix is proud to introduce the Wisdom NWB-25A Charger, a high-efficiency portable charger designed to keep your mining equipment powered and ready for any challenge. This advanced charger is an essential tool for mining professionals who rely on consistent and efficient power for their operations. Universal Compatibility and High Efficiency The NWB-25A Charger is versatile and adaptable, with AC input compatibility ranging from AC 100-240V +/- 10%, 0.3A, 50-60 Hz, ensuring it can be used in various locations around the world. It also features a DC input of 7~30 V, 1.7 A, making it suitable for a wide range of applications. Optimized Charging for Wisdom Equipment Designed to work seamlessly with Wisdom's range of mining lamps, the NWB-25A offers a maximum DC output voltage of 4.56 ± 0.05 V and a DC output current of 2400 mA ± 100 mA. This ensures fast and efficient charging times: 5 hours for the KL8M, 4-5 hours for the KL5M, and 6 hours for the KL12M, minimizing downtime and enhancing productivity. Global Standards Compliance The NWB-25A Charger is equipped with AC plugs that conform to US, EU, UK, or AU standards, catering to different markets and ensuring compliance with global electrical standards. This feature makes the NWB-25A ideal for mining companies operating in multiple countries. Compact and Lightweight Design With its compact size (116 x 76 x 56 mm; 4.6 x 3.0 x 2.2 in) and light weight (215 g; 7.58 oz), the NWB-25A is highly portable, easy to transport, and convenient to use in various settings, from mining sites to office environments. Enhance Your Charging Experience The Wisdom NWB-25A Charger is more than just a power accessory; it's a commitment to efficiency and reliability. Visit Provix today to discover how this charger can transform your mining operations. For more information, visit www.provix.net or contact our expert team. View Details

Tube Fittings Bulkhead Male Connector NPT Thread – 1/16”, 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2", 5/8”, 3/4”, 7/8”, 1” – 6000 PSI – ASME B16.34 / MSS-SP-99 / ASME B31.3

The Tube Fittings Bulkhead Male Connector NPT Thread is a specialized fitting designed to pass tubing securely through panels, enclosures, or bulkheads while maintaining a reliable, leak-tight seal. It is suitable for high-pressure applications up to 6000 PSI and is manufactured according to ASME B16.34, MSS-SP-99, and ASME B31.3 standards, ensuring safety, reliability, and compatibility with industrial systems.

Its bulkhead design allows the tubing to be firmly supported at the barrier, reducing stress on the tubing, preventing vibration-induced leaks, and providing consistent sealing performance under pressure, vacuum, or dynamic conditions.

The NPT male thread enables direct connection to piping, valves, or other threaded components, making installation straightforward and versatile. Precision-machined components ensure that ferrules deform correctly for an optimal seal, while silver-plated threads reduce friction and minimize galling during assembly. Case-hardened ferrules and a robust body material provide durability under repeated assembly or exposure to high vibration, thermal cycling, or corrosive environments.

The design also allows for easy disconnection and retightening without compromising the seal, providing flexibility for maintenance or system changes. Tubing must be properly inserted to the shoulder of the fitting body to ensure maximum sealing efficiency, emphasizing that tubing selection and handling are integral to optimal performance.

Overall, this fitting provides a reliable, high-performance solution for routing tubing through barriers in demanding industrial environments, combining ease of installation, high-pressure capability, and long-term durability with precision engineering suitable for critical oil and gas or process applications.

View Details

LM2500+ G4 Gas Turbine

The LM2500+G4 is an advanced variant of the LM2500+ aeroderivative gas turbine, designed to provide increased output and thermal efficiency through a set of targeted design upgrades. It retains the core architecture of the LM2500+ but introduces changes to the flow path that increase overall engine performance.

The primary difference between the LM2500+G4 and the LM2500+ is the increased flow capacity in the high-pressure (HP) compressor, HP turbine, and low-pressure turbine. These modifications raise the overall pressure ratio from 23.6 to 24.2, resulting in higher thermal efficiency and greater mass flow. The design changes are relatively limited, focusing mainly on minor geometry adjustments to blades and vanes to accommodate the increased flow.

In the high-pressure turbine, the G4 version includes improved blade cooling and upgraded materials. These changes enable the turbine to handle higher temperatures, contributing to both improved performance and component durability. To maintain proper rotor thrust balance with the updated flow path, the effective area of the compressor discharge pressure seal was also adjusted.

In terms of operational performance, the LM2500+G4 offers measurable improvements over the LM2500+ across a variety of ambient conditions. For example, it delivers approximately 11% more power in cold conditions and 12% more in hot conditions (running data to -50 deg F and start data to –40 deg F). In combined-cycle mode, the G4 variant is expected to provide a power increase of 8.5% and a heat rate improvement of 0.75% compared to the LM2500+.

The LM2500+G4 supports two power turbine configurations:

A six-stage, low-speed power turbine, typically used for power generation applications with a nominal speed of 3600 rpm.
A two-stage High-Speed Power Turbine (HSPT), used for mechanical drive applications, designed for a nominal speed of 6100 rpm, with an operating range from 3050 to 6400 rpm.

Both configurations support operation over a cubic load curve, which allows the turbine to match power output with varying mechanical loads — a feature especially useful in pipeline compression and similar variable-load industrial applications.

View Details