In oil and gas well operations, the 2 ½” Tubing End Locator plays a critical role in confirming the exact depth at which production tubing terminates within the wellbore. Accurately identifying the tubing endpoint is essential during various well intervention activities, including maintenance, workovers, and the installation or retrieval of downhole tools and equipment.

During operations such as setting packers, deploying plugs, running logging tools, or performing fishing jobs to recover stuck equipment, precise knowledge of tubing length ensures that tools are positioned correctly. This prevents accidental over-pumping or tool deployment beyond the tubing into the open hole section of the well, where damage to equipment or tool loss can occur.

The 2 ½” Tubing End Locator is designed specifically to fit tubing with an outer diameter of approximately 2 ½ inches. It features a compact maximum outside diameter of around 1.750 inches, allowing it to pass easily within the tubing without causing obstruction. The tool employs a spring-loaded finger mechanism that activates mechanically upon reaching the tubing bottom. This signal does not rely on electronic sensors or depth measurement devices, making the tool highly reliable even in harsh downhole environments where electronics may be compromised by pressure, temperature, or fluid conditions.

Standardized threaded connections on the tool—typically a 15/16 - 10 UN pin on the top and a 1 - 11 1/2 NPT box on the bottom—enable it to be seamlessly integrated into a wide range of intervention toolstrings. These common connection types ensure compatibility with existing downhole equipment and facilitate quick assembly and deployment.

Manufactured from high-strength alloy steel or similar materials, the tubing end locator is built to withstand typical downhole conditions, including high pressure, elevated temperatures, and corrosive fluids commonly found in oil and gas wells. Its purely mechanical design minimizes maintenance requirements and reduces the risk of failure compared to electronic alternatives.

This tool is particularly valuable in wells where tubing length may have changed due to wear, repairs, or previous interventions, offering an essential measure of control and confidence in complex well environments.

Available sizes: 2 3/8”, 2 7/8”, 3 1/2”, 4”, 4 1/2”, 5”, 5 1/2'”  and 7”

The 3-1/2" WR-SCSSSV FXE is a Ballycatter model safety valve specifically designed for installation in the upper wellbore to provide an emergency shut-off of the production flow path. This valve plays a crucial role in well control by isolating the wellbore during emergency situations such as system failures or damage to surface production control facilities. Its fail-safe design ensures that the valve automatically closes to protect the wellbore and surface equipment whenever a fault occurs.

This safety valve is a flapper-type valve that is both surface controlled and wireline retrievable, allowing operators to easily deploy, operate, and retrieve the valve without extensive well intervention. The valve is installed within a corresponding model Landing Nipple, ensuring precise fit and reliable operation within the tubing string.

The design incorporates a self-equalizing mechanism that balances pressure differentials across the valve, which helps maintain consistent performance even under varying downhole pressures. This self-equalizing feature reduces the risk of valve malfunction due to unexpected pressure changes.

When the valve is in the open position, the sealing surfaces are positioned outside the flow path, ensuring that the fluid can pass freely without obstruction or erosion on the sealing components. This arrangement optimizes flow efficiency and helps extend the valve’s operational life. The flapper itself is made from solid bar stock, providing a strong and durable barrier that can withstand the harsh conditions found in high-pressure well environments.

The valve is rated for working pressures up to 10,000 psi, allowing it to operate reliably under high-pressure well conditions. The 3-1/2" WR-SCSSSV FXE is designed to ensure wellbore isolation in emergency situations, providing a critical safety function in the well control system.

The Wireline Spear is a downhole tool used in oil and gas wells to retrieve lost, broken, or compacted wireline that cannot be engaged with a standard two-prong wireline grab. It is designed for fishing operations where the wireline has become badly balled up or tightly compacted, situations where conventional pronged grabs are ineffective.

The tool is deployed on a wireline and guided down the wellbore under its own weight. Its central mandrel is surrounded by upward-pointing barbs or slips that penetrate and anchor into the wireline. When engaged, these barbs provide a secure grip on the wire, allowing the tool and wire to be retrieved to the surface.

The Wireline Spear is designed for maximum penetration into tightly balled or compacted wire. Its barbs ensure engagement even when the wire is severely entangled. Because the Wireline Spear is effectively non-releasable, it is typically run with a disconnect arrangement above the tool. This allows the assembly to be released if the wire cannot be recovered fully, preventing the tool from becoming stuck in the wellbore.

The tool is available in sizes from 1.5” to 3.5”, with a maximum outside diameter of 1.500” to 3.500” and a fishing neck O.D. of 1.375” to 2.312”. It connects to the wireline through a top connection ranging from 15/16 – 10 UN to 1-1/16 – 10 UN and can retrieve wire diameters from 0.50” to 3.50”.

The Wireline Spear is constructed from steel to withstand downhole mechanical stresses and pressures. Its design includes a central mandrel with upward-pointing barbs that secure tightly compacted or balled-up wireline. The tool’s compact dimensions and engagement mechanism allow it to retrieve wireline that cannot be captured by standard pronged grabs, and it is generally run with a disconnect arrangement above the tool to allow release if the wire cannot be recovered.

The 4 1/16” 10M Coiled Tubing Hanger is engineered to provide reliable mechanical support and pressure containment for coiled tubing strings used in demanding oil and gas well intervention operations. Specifically designed to accommodate coiled tubing sizes up to 3 1/2” outer diameter, this hanger is rated for high-pressure applications up to 10,000 psi (10M), making it suitable for wells with challenging downhole conditions and high-pressure requirements.

Constructed with robust materials and precision-engineered to meet API 6B and 6BX standards, the hanger ensures secure connection to wellhead equipment through flanged interfaces, enabling seamless integration into existing well infrastructure. The design incorporates a wireline entry sub that guides wireline tools into the tubing bore and provides a secondary annulus seal. This feature not only facilitates the safe deployment of wireline tools but also restricts any upward movement of the coiled tubing, maintaining tubing position and well control during operations.

This coiled tubing hanger supports a range of intervention tasks, including well cleanouts, stimulations, logging, and workover activities, by securely suspending the tubing and maintaining pressure integrity at the wellhead. The ability to reliably seal the annulus while supporting heavy-duty tool strings helps reduce operational risks, prevents fluid leaks, and minimizes well downtime. Its capacity to handle larger tubing sizes and high pressures makes the 4 1/16” 10M hanger especially valuable in complex wells where robust mechanical support and dependable sealing are critical for safe and efficient well intervention.